Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
_bt_split() is passed NULL as its insertion scankey for internal page
splits. Two recently added Assert() statements failed to consider this,
leading to a crash with pg_upgrade'd BREE_VERSION < 4 indexes. Remove
the assertions.
The assertions in question were added by commit 0d861bbb, which added
nbtree deduplication. It would be possible to fix the assertions
directly instead, but they weren't adding much anyway.
This commit adds pg_stat_progress_basebackup view that reports
the progress while an application like pg_basebackup is taking
a base backup. This uses the progress reporting infrastructure
added by c16dc1aca5, adding support for streaming base backup.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Amit Langote, Sergei Kornilov
Discussion: https://postgr.es/m/9ed8b801-8215-1f3d-62d7-65bff53f6e94@oss.nttdata.com
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Deduplication reduces the storage overhead of duplicates in indexes that
use the standard nbtree index access method. The deduplication process
is applied lazily, after the point where opportunistic deletion of
LP_DEAD-marked index tuples occurs. Deduplication is only applied at
the point where a leaf page split would otherwise be required. New
posting list tuples are formed by merging together existing duplicate
tuples. The physical representation of the items on an nbtree leaf page
is made more space efficient by deduplication, but the logical contents
of the page are not changed. Even unique indexes make use of
deduplication as a way of controlling bloat from duplicates whose TIDs
point to different versions of the same logical table row.
The lazy approach taken by nbtree has significant advantages over a GIN
style eager approach. Most individual inserts of index tuples have
exactly the same overhead as before. The extra overhead of
deduplication is amortized across insertions, just like the overhead of
page splits. The key space of indexes works in the same way as it has
since commit dd299df8 (the commit that made heap TID a tiebreaker
column).
Testing has shown that nbtree deduplication can generally make indexes
with about 10 or 15 tuples for each distinct key value about 2.5X - 4X
smaller, even with single column integer indexes (e.g., an index on a
referencing column that accompanies a foreign key). The final size of
single column nbtree indexes comes close to the final size of a similar
contrib/btree_gin index, at least in cases where GIN's posting list
compression isn't very effective. This can significantly improve
transaction throughput, and significantly reduce the cost of vacuuming
indexes.
A new index storage parameter (deduplicate_items) controls the use of
deduplication. The default setting is 'on', so all new B-Tree indexes
automatically use deduplication where possible. This decision will be
reviewed at the end of the Postgres 13 beta period.
There is a regression of approximately 2% of transaction throughput with
synthetic workloads that consist of append-only inserts into a table
with several non-unique indexes, where all indexes have few or no
repeated values. The underlying issue is that cycles are wasted on
unsuccessful attempts at deduplicating items in non-unique indexes.
There doesn't seem to be a way around it short of disabling
deduplication entirely. Note that deduplication of items in unique
indexes is fairly well targeted in general, which avoids the problem
there (we can use a special heuristic to trigger deduplication passes in
unique indexes, since we're specifically targeting "version bloat").
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
No bump in BTREE_VERSION, since the representation of posting list
tuples works in a way that's backwards compatible with version 4 indexes
(i.e. indexes built on PostgreSQL 12). However, users must still
REINDEX a pg_upgrade'd index to use deduplication, regardless of the
Postgres version they've upgraded from. This is the only way to set the
new nbtree metapage flag indicating that deduplication is generally
safe.
Author: Anastasia Lubennikova, Peter Geoghegan
Reviewed-By: Peter Geoghegan, Heikki Linnakangas
Discussion:
https://postgr.es/m/55E4051B.7020209@postgrespro.ruhttps://postgr.es/m/4ab6e2db-bcee-f4cf-0916-3a06e6ccbb55@postgrespro.ru
Invent the concept of a B-Tree equalimage ("equality implies image
equality") support function, registered as support function 4. This
indicates whether it is safe (or not safe) to apply optimizations that
assume that any two datums considered equal by an operator class's order
method must be interchangeable without any loss of semantic information.
This is static information about an operator class and a collation.
Register an equalimage routine for almost all of the existing B-Tree
opclasses. We only need two trivial routines for all of the opclasses
that are included with the core distribution. There is one routine for
opclasses that index non-collatable types (which returns 'true'
unconditionally), plus another routine for collatable types (which
returns 'true' when the collation is a deterministic collation).
This patch is infrastructure for an upcoming patch that adds B-Tree
deduplication.
Author: Peter Geoghegan, Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wzn3Ee49Gmxb7V1VJ3-AC8fWn-Fr8pfWQebHe8rYRxt5OQ@mail.gmail.com
Multi-insert for heap is not yet used actively for catalogs, but the
code to support this case is in place for logical decoding. The
existing code forgot to issue a XLOG_HEAP2_NEW_CID record for the first
tuple inserted, leading to failures when attempting to use multiple
inserts for catalogs at decoding time. This commit fixes the problem by
WAL-logging the needed CID.
This is not an active bug, so no back-patch is done.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/E0D4CC67-A1CF-4DF4-991D-B3AC2EB5FAE9@yesql.se
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
VACUUM may truncate heap in several batches. The activity report
is logged for each batch, and contains the number of pages in the table
before and after the truncation, and also the elapsed time during
the truncation. Previously the elapsed time reported in each batch was
the total elapsed time since starting the truncation until finishing
each batch. For example, if the truncation was processed dividing into
three batches, the second batch reported the accumulated time elapsed
during both first and second batches. This is strange and confusing
because the number of pages in the table reported together is not
total. Instead, each batch should report the time elapsed during
only that batch.
The cause of this issue was that the resource usage snapshot was
initialized only at the beginning of the truncation and was never
reset later. This commit fixes the issue by changing VACUUM so that
the resource usage snapshot is reset at each batch.
Back-patch to all supported branches.
Reported-by: Tatsuhito Kasahara
Author: Tatsuhito Kasahara
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/CAP0=ZVJsf=NvQuy+QXQZ7B=ZVLoDV_JzsVC1FRsF1G18i3zMGg@mail.gmail.com
btbuild() has nothing to say about how NULL values compare in nbtree.
Besides, there are _bt_compare() header comments that describe how NULL
values are handled.
Commit b10714080 moved the GinPageSetDeleteXid() call to a spot where
the "page" variable was pointing to the wrong page, causing the XID
to be inserted on a page that's not being deleted, thus allowing later
GinPageIsRecyclable tests to recycle the deleted page too soon.
It might be a good idea to stop using the single "page" variable for
multiple purposes in this function. But for the moment I just moved
the GinPageSetDeleteXid() call down beside the GinPageSetDeleted()
call, which seems like a more logical place for it anyway.
Back-patch to v11, as the faulty patch was. (Fortunately, the bug
hasn't made it into any release yet.)
Discussion: https://postgr.es/m/21620.1581098806@sss.pgh.pa.us
Tuple conversion incorrectly concluded that no conversion was needed
as long as all the attributes lined up. But if the source tuple has a
missing attribute (from addition of a column with default), then the
destination tupdesc might not reflect the same default. The typical
symptom was that the affected columns would be unexpectedly NULL.
Repair by always forcing conversion if the source has missing
attributes, which will be filled in by the deform operation. (In
theory we could optimize for when the destination has the same
default, but that seemed overkill.)
Backpatch to 11 where missing attributes were added.
Per bug #16242.
Vik Fearing (discovery, code, testing) and me (analysis, testcase).
Discussion: https://postgr.es/m/16242-d1c9fca28445966b@postgresql.org
Using 32 bit counters means they can now realistically wrap around when
vacuuming extremely large tables. Because they're signed integers,
stats printed by vacuum look very odd when they do.
We'd love to backpatch this, but refrain because the variables are
exported and could cause third-party code to break.
Reviewed-by: Julien Rouhaud, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200131205926.GA16367@alvherre.pgsql
Using a lookup table of digit pairs reduces the number of divisions
needed, and calculating the length upfront saves some work; these
ideas are taken from the code previously committed for floats.
David Fetter, reviewed by Kyotaro Horiguchi, Tels, and me.
Discussion: https://postgr.es/m/20190924052620.GP31596%40fetter.org
If no DSM slots are available, a ParallelContext can still be
created, but its seg pointer is NULL. Teach parallel btree build
to cope with that by falling back to a regular non-parallel build,
to avoid crashing with a segmentation fault.
Back-patch to 11, where parallel CREATE INDEX landed.
Reported-by: Nicola Contu
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CA%2BhUKGJgJEBnkuODBVomyK3MWFvDBbMVj%3Dgdt6DnRPU-5sQ6UQ%40mail.gmail.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
Detection of WAL records having references to invalid pages
during recovery causes PostgreSQL to raise a PANIC-level error,
aborting the recovery. Setting ignore_invalid_pages to on causes
the system to ignore those WAL records (but still report a warning),
and continue recovery. This behavior may cause crashes, data loss,
propagate or hide corruption, or other serious problems.
However, it may allow you to get past the PANIC-level error,
to finish the recovery, and to cause the server to start up.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAHGQGwHCK6f77yeZD4MHOnN+PaTf6XiJfEB+Ce7SksSHjeAWtg@mail.gmail.com
In commit 40d964ec99, we changed the way memory is allocated for dead
tuples but forgot to update the place where we compute the maximum
number of dead tuples. This could lead to invalid memory requests.
Reported-by: Andres Freund
Diagnosed-by: Andres Freund
Author: Masahiko Sawada
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/20200121060020.e3cr7s7fj5rw4lok@alap3.anarazel.de
The BRIN add_value() and union() functions need to make a longer-lived
copy of the argument, if they want to store it in the BrinValues struct
also passed as argument. The functions for the "inclusion operator
classes" used with box, range and inet types didn't take into account
that the union helper function might return its argument as is, without
making a copy. Check for that case, and make a copy if necessary. That
case arises at least with the range_union() function, when one of the
arguments is an 'empty' range:
CREATE TABLE brintest (n numrange);
CREATE INDEX brinidx ON brintest USING brin (n);
INSERT INTO brintest VALUES ('empty');
INSERT INTO brintest VALUES (numrange(0, 2^1000::numeric));
INSERT INTO brintest VALUES ('(-1, 0)');
SELECT brin_desummarize_range('brinidx', 0);
SELECT brin_summarize_range('brinidx', 0);
Backpatch down to 9.5, where BRIN was introduced.
Discussion: https://www.postgresql.org/message-id/e6e1d6eb-0a67-36aa-e779-bcca59167c14%40iki.fi
Reviewed-by: Emre Hasegeli, Tom Lane, Alvaro Herrera
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
The strategy of GIN index scan is driven by opclass-specific extract_query
method. This method that needed search mode is GIN_SEARCH_MODE_ALL. This
mode means that matching tuple may contain none of extracted entries. Simple
example is '!term' tsquery, which doesn't need any term to exist in matching
tsvector.
In order to handle such scan key GIN calculates virtual entry, which contains
all TIDs of all entries of attribute. In fact this is full scan of index
attribute. And typically this is very slow, but allows to handle some queries
correctly in GIN. However, current algorithm calculate such virtual entry for
each GIN_SEARCH_MODE_ALL scan key even if they are multiple for the same
attribute. This is clearly not optimal.
This commit improves the situation by introduction of "exclude only" scan keys.
Such scan keys are not capable to return set of matching TIDs. Instead, they
are capable only to filter TIDs produced by normal scan keys. Therefore,
each attribute should contain at least one normal scan key, while rest of them
may be "exclude only" if search mode is GIN_SEARCH_MODE_ALL.
The same optimization might be applied to the whole scan, not per-attribute.
But that leads to NULL values elimination problem. There is trade-off between
multiple possible ways to do this. We probably want to do this later using
some cost-based decision algorithm.
Discussion: https://postgr.es/m/CAOBaU_YGP5-BEt5Cc0%3DzMve92vocPzD%2BXiZgiZs1kjY0cj%3DXBg%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov, Tom Lane, Julien Rouhaud
Reviewed-by: Julien Rouhaud, Tomas Vondra, Tom Lane
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
Earlier, we use to postpone deleting empty pages till the second stage of
vacuum to amortize the cost of scanning internal pages. However, that can
sometimes (say vacuum is canceled or errored between first and second
stage) delay the pages to be recycled.
Another thing is that to facilitate deleting empty pages in the second
stage, we need to share the information about internal and empty pages
between different stages of vacuum. It will be quite tricky to share this
information via DSM which is required for the upcoming parallel vacuum
patch.
Also, it will bring the logic to reclaim deleted pages closer to nbtree
where we delete empty pages in each pass.
Overall, the advantages of deleting empty pages in each pass outweigh the
advantages of postponing the same.
Author: Dilip Kumar, with changes by Amit Kapila
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LGr+MN0xHZpJ2dfS8QNQ1a_aROKowZB+MPNep8FVtwAA@mail.gmail.com
Make the value null only at pg_stat_activity-output time, as suggested
by Tom Lane, instead of messing with the internal state. This should
appease buildfarm members with force_parallel_mode=regress, which are
running parallel queries on logical replication walsenders.
The fact that walsenders can run parallel queries should perhaps be
studied more carefully, but for the moment let's get rid of the red
blots in buildfarm.
Backpatch to pg10, like the previous commit.
Discussion: https://postgr.es/m/30804.1578438763@sss.pgh.pa.us
Returning a non-NULL time is pointless, sinc a walsender is not a
process that would be running normal transactions anyway, but the code
was unintentionally exposing the process start time intermittently,
which was not only bogus but it also confused monitoring systems looking
for idle transactions. Fix by avoiding all updates in walsenders.
Backpatch to 11, where walsenders started appearing in pg_stat_activity.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/20191209234409.exe7osmyalwkt5j4@development
Instead of always calling heap_fetch_toast_slice during detoasting,
invoke a table AM callback which, when the toast table is a heap
table, will be heap_fetch_toast_slice.
This makes it possible for a table AM other than heap to be used
as a TOAST table. It also completes the series of commits intended
to improve the interaction of tableam with TOAST that began with
commit 8b94dab06617ef80a0901ab103ebd8754427ef5a; detoast.c is
now, hopefully, fully AM-independent.
Patch by me, reviewed by Andres Freund and Peter Eisentraut.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Previously, the toast table had to be implemented by the same AM that
was used for the main table, which was bad, because the detoasting
code won't work with anything but heap. This commit doesn't fix the
latter problem, although there's another patch coming which does,
but it does let you pick something that works (i.e. heap, right now).
Patch by me, reviewed by Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
The fastpath insert optimization's incomplete split flag Assert() is
redundant. We'll reach the more general Assert() within
_bt_findinsertloc() in all cases. (Besides, Assert()'ing that the
rightmost page doesn't have the flag set never made much sense.)
Commit 558a9165e0 taught _bt_delitems_delete() to produce its own XID
horizon on the primary. Standbys no longer needed to generate their own
latestRemovedXid, since they could just use the explicitly logged value
from the primary instead. The deleted offset numbers array from the
xl_btree_delete WAL record was no longer used by the REDO routine for
anything other than deleting the items.
This enables a minor optimization: We now treat the array as buffer
state, not generic WAL data, following _bt_delitems_vacuum()'s example.
This should be a minor win, since it allows us to avoid including the
deleted items array in cases where XLogInsert() stores the whole buffer
anyway. The primary goal here is to make the code more maintainable,
though. Removing inessential differences between the two functions
highlights the fundamental differences that remain.
Also change xl_btree_delete to use uint32 for the size of the array of
item offsets being deleted. This brings xl_btree_delete closer to
xl_btree_vacuum. Furthermore, it seems like a good idea to use an
explicit-width integer type (the field was previously an "int").
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
Discussion: https://postgr.es/m/CAH2-Wzkz4TjmezzfAbaV1zYrh=fr0bCpzuJTvBe5iUQ3aUPsCQ@mail.gmail.com
Adjust a comment that describes how alignment of the new left page high
key works in btree_xlog_split(), the nbtree page split REDO routine.
The wording used before commit 2c03216d83 is much clearer, so go back
to that.
_bt_delitems_vacuum() comments claimed that it isn't worth another scan
of the page to avoid falsely unsetting the BTP_HAS_GARBAGE page flag
hint (this happens to be the same wording that was removed from
_bt_delitems_delete() by my recent commit fe97c61c). The comments made
little sense, though. The issue can't have much to do with performing a
second scan of the target leaf page, since an LP_DEAD test could easily
be performed in the first scan of the page anyway (the scan that takes
place in btvacuumpage() caller).
Revise the explanation. It makes much more sense to frame this as an
issue about recovery conflicts. _bt_delitems_vacuum() cannot easily
generate an XID cutoff in the same way that _bt_delitems_delete() is
designed to.
Falsely unsetting the page flag is not ideal, and is likely to happen
more often than was supposed by the original comments. Explain why it
usually isn't a problem in practice. There may be an argument for
_bt_delitems_vacuum() not clearing the BTP_HAS_GARBAGE bit, removing the
question of it being falsely unset by VACUUM (there may even be an
argument for not using a page level hint at all). This can be revisited
later.
Commit fe97c61c updated LP_DEAD item deletion comments, but missed a
minor discrepancy on the REDO side. Fix it now.
In passing, don't talk about the btree_xlog_vacuum() behavior within
btree_xlog_delete(). The reliance on XLOG_HEAP2_CLEANUP_INFO records
for recovery conflicts is already discussed within btvacuumpage() and
mentioned again in passing above btree_xlog_vacuum(), which seems
sufficient.
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The part in charge of doing the vacuum on all the indexes of a relation
was duplicated, with the same handling for progress reporting done.
While on it, update the progress reporting for heap vacuuming in the
subroutine doing the actual work, keeping the status update local. This
way, any future caller of lazy_vacuum_heap() does not have to worry
about doing any progress reporting update.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20191120210600.GC30362@telsasoft.com
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
Comments about the consequences of clearing the BTP_HAS_GARBAGE page
flag bit that apply only to VACUUM were added to code that deals with
opportunistic deletion of LP_DEAD items by commit a760893d. The same
comment block was added to both _bt_delitems_vacuum() and
_bt_delitems_delete(). Correct _bt_delitems_delete()'s copy of the
comment block.
_bt_delitems_delete() reliably deletes items that were found by caller
to have their LP_DEAD bit set. There is no question about whether or
not unsetting the BTP_HAS_GARBAGE bit can miss some LP_DEAD items that
were set recently.
Also tweak a related section of the nbtree README.
The REDO routine for nbtree's xl_btree_vacuum record type hasn't
performed a "pin scan" since commit 3e4b7d87 went in, so clearly there
isn't any point in VACUUM WAL-logging information that won't actually be
used. Finish off the work of commit 3e4b7d87 (and the closely related
preceding commit 687f2cd7) by removing the code that generates this
unused information. Also remove the REDO routine code disabled by
commit 3e4b7d87.
Replace the unneeded lastBlockVacuumed field in xl_btree_vacuum with a
new "ndeleted" field. The new field isn't actually needed right now,
since we could continue to infer the array length from the overall
record length. However, an upcoming patch to add deduplication to
nbtree needs to add an "items updated" field to xl_btree_vacuum, so we
might as well start being explicit about the number of items now.
(Besides, it doesn't seem like a good idea to leave the xl_btree_vacuum
struct without any fields; the C standard says that that's undefined.)
nbtree VACUUM no longer forces writing a WAL record for the last block
in the index. Writing out a WAL record with no items for the final
block was supposed to force processing of a lastBlockVacuumed field by a
pin scan.
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
Discussion: https://postgr.es/m/CAH2-WzmY_mT7UnTzFB5LBQDBkKpdV5UxP3B5bLb7uP%3D%3D6UQJRQ%40mail.gmail.com
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This is a bug, but for now I'm not going to back-patch, because the
consequences are minor. It's possible to cause a spurious warning
to be generated, but that doesn't really matter. It's also possible
to trigger an assertion failure, but production builds shouldn't
have assertions enabled.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
The new function, heap_fetch_toast_slice, is shared between
toast_fetch_datum_slice and toast_fetch_datum, and does all the
work of scanning the TOAST table, fetching chunks, and storing
them into the space allocated for the result varlena.
As an incidental side effect, this allows toast_fetch_datum_slice
to perform the scan with only a single scankey if all chunks are
being fetched, which might have some tiny performance benefit.
Discussion: http://postgr.es/m/CA+TgmobBzxwFojJ0zV0Own3dr09y43hp+OzU2VW+nos4PMXWEg@mail.gmail.com
Tuple conversion support in tupconvert.c is able to convert rowtypes
between two relations, inner and outer, which are logically equivalent
but have a different ordering or even dropped columns (used mainly for
inheritance tree and partitions). This makes use of attribute mappings,
which are simple arrays made of AttrNumber elements with a length
matching the number of attributes of the outer relation. The length of
the attribute mapping has been treated as completely independent of the
mapping itself until now, making it easy to pass down an incorrect
mapping length.
This commit refactors the code related to attribute mappings and moves
it into an independent facility called attmap.c, extracted from
tupconvert.c. This merges the attribute mapping with its length,
avoiding to try to guess what is the length of a mapping to use as this
is computed once, when the map is built.
This will avoid mistakes like what has been fixed in dc816e58, which has
used an incorrect mapping length by matching it with the number of
attributes of an inner relation (a child partition) instead of an outer
relation (a partitioned table).
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20191121042556.GD153437@paquier.xyz
This changes the routines in charge of recycling WAL segments past the
last redo LSN to not use anymore "RedoRecPtr" as a local variable, which
is also available in the context of the session as a static declaration,
replacing it with "lastredoptr". This confusion has been introduced by
d9fadbf, so backpatch down to v11 like the other commit.
Thanks to Tom Lane, Robert Haas, Alvaro Herrera, Mark Dilger and Kyotaro
Horiguchi for the input provided.
Author: Ranier Vilela
Discussion: https://postgr.es/m/MN2PR18MB2927F7B5F690065E1194B258E35D0@MN2PR18MB2927.namprd18.prod.outlook.com
Backpatch-through: 11
Commit d5406dea25 used a slightly
novel, and wrong, approach to compute the length of the last
toast chunk. It worked fine unless the last chunk happened to
have the largest possible size.
Rework some of the checks for bad TOAST chunks to be a bit simpler
and easier to understand. These checks verify that (1) we get all
and only the chunk numbers we expect to see and (2) each chunk has
the expected size. However, the existing code was a bit hard to
understand, at least for me; try to make it clearer.
As part of that, have toast_fetch_datum_slice check the relationship
between endchunk and totalchunks only with an Assert() rather than
checking every chunk number against both values. There's no need to
check that relationship in production builds because it's not a
function of whether on-disk corruption is present; it's just a
question of whether the code does the right math.
Also, have toast_fetch_datum_slice() use ereport(ERROR) rather than
elog(ERROR). Commit fd6ec93bf8 made
the two functions inconsistent with each other.
Rename assorted variables for better clarity and consistency, and
move assorted variables from function scope to the function's main
loop. Remove a few variables that are used only once entirely.
Patch by me, reviewed by Peter Eisentraut.
Discussion: http://postgr.es/m/CA+TgmobBzxwFojJ0zV0Own3dr09y43hp+OzU2VW+nos4PMXWEg@mail.gmail.com
This Assert thought that an overflowed transaction can never get registered
for the group update. But that is not true, because even when the number
of children for a transaction got reduced, the overflow flag is not
changed. And, for group update, we only care about the current number of
children for a transaction that is being committed.
Based on comments by Andres Freund, remove a redundant Assert in
TransactionIdSetPageStatus as we already had a static Assert for the same
condition a few lines earlier.
Reported-by: Vignesh C
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/CAFiTN-s5=uJw-Z6JC9gcqtBSjXsrHnU63PXBrA=pnBjqnkm5UA@mail.gmail.com
recoveryDelayUntilTime was introduced by commit 36da3cfb45 as a global
because its method of operation was devilishly intrincate. Commit
c945af80cf removed all that complexity and could have turned it into a
local variable, but didn't. Do so now.
Discussion: https://postgr.es/m/20191213200751.GA10731@alvherre.pgsql
Reviewed-by: Michaël Paquier, Daniel Gustafsson
Commit a7ee7c8513 fixed a bug in GiST page split during index creation,
where we failed to re-find the position of a downlink after the page
containing it was split. However, that fix was incomplete; the other call
to gistinserttuples() in the same function needs to also clear
'downlinkoffnum'.
Fixes bug #16134 reported by Alexander Lakhin, for real this time. The
previous fix was enough to fix the crash with the reproducer script for
bug #16162, but the original script for #16134 was still crashing.
Backpatch to v12, like the previous incomplete fix.
Discussion: https://www.postgresql.org/message-id/d869f537-abe4-d2ea-0510-38cd053f5152%40gmail.com
This has been introduced by c16dc1a since progress reporting for VACUUM
has been added. As this issue just causes some extra work and is
harmless, no backpatch is done.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20191213030831.GT2082@telsasoft.com
The bug was similar to the one that was fixed in commit 22251686f0. When
we split page X and insert the downlink for the new page, the parent page
might also need to be split. When that happens, the downlink offset number
we remembered for X is no longer valid. We correctly called
gistFindCorrectParent() to re-find it, but gistFindCorrectParent() doesn't
do anything if the LSN of the page hasn't changed, and we stopped updating
LSNs during index build in commit 9155580fd5. The buggy codepath was taken
if the page was split into three or more pages, and inserting the downlink
caused the parent page to split. To fix, explicitly mark the downlink
offset number as invalid, to force gistFindCorrectParent() to re-find it.
Fixes bug #16134 reported by Alexander Lakhin, reported again as #16162 by
Andreas Kunert. Thanks to Jeff Janes, Tom Lane and Tomas Vondra for
debugging. Backpatch to v12, where we stopped WAL-logging during index
build.
Discussion: https://www.postgresql.org/message-id/16134-0423f729671dec64%40postgresql.org
Discussion: https://www.postgresql.org/message-id/16162-45d21b7b6c1a3105%40postgresql.org
Error messages referring to incorrect WAL segment names could have been
generated for a fsync() failure or when creating a new segment at the
end of recovery.
XLogFileNameP() is a wrapper routine able to build a palloc'd string for
a WAL segment name, which is used for error string generation. There
were several code paths where it gets called in a critical section,
where memory allocation is not allowed. This results in triggering
an assertion failure instead of generating the wanted error message.
Another, more annoying, problem is that if the allocation to generate
the WAL segment name fails on OOM, then the failure would be escalated
to a PANIC.
This removes the routine and all its callers are replaced with a logic
using a fixed-size buffer. This way, all the existing mistakes are
fixed and future ones are prevented.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CA+fd4k5gC9H4uoWMLg9K_QfNrnkkdEw+-AFveob9YX7z8JnKTA@mail.gmail.com
XLogReader, walsender and pg_waldump all had their own routines to read
data from WAL files to memory, with slightly different approaches
according to the particular conditions of each environment. There's a
lot of commonality, so we can refactor that into a single routine
WALRead in XLogReader, and move the differences to a separate (simpler)
callback that just opens the next WAL-segment. This results in a
clearer (ahem) code flow.
The error reporting needs are covered by filling in a new error-info
struct, WALReadError, and it's the caller's responsibility to act on it.
The backend has WALReadRaiseError() to do so.
We no longer ever need to seek in this interface; switch to using
pg_pread().
Author: Antonin Houska, with contributions from Álvaro Herrera
Reviewed-by: Michaël Paquier, Kyotaro Horiguchi
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
This reworks the reloption parsing and build of a couple of index AMs by
creating new structures for each index AM's options. This split was
already done for BRIN, GIN and GiST (which actually has a fillfactor
parameter), but not for hash, B-tree and SPGiST which relied on
StdRdOptions due to an overlap with the default option set.
This saves a couple of bytes for rd_options in each relcache entry with
indexes making use of relation options, and brings more consistency
between all index AMs. While on it, add a couple of AssertMacro() calls
to make sure that utility macros to grab values of reloptions are used
with the expected index AM.
Author: Nikolay Shaplov
Reviewed-by: Amit Langote, Michael Paquier, Álvaro Herrera, Dent John
Discussion: https://postgr.es/m/4127670.gFlpRb6XCm@x200m
If LISTEN is the only action in a serializable-mode transaction,
and the session was not previously listening, and the notify queue
is not empty, predicate.c reported an assertion failure. That
happened because we'd acquire the transaction's initial snapshot
during PreCommit_Notify, which was called *after* predicate.c
expects any such snapshot to have been established.
To fix, just swap the order of the PreCommit_Notify and
PreCommit_CheckForSerializationFailure calls during CommitTransaction.
This will imply holding the notify-insertion lock slightly longer,
but the difference could only be meaningful in serializable mode,
which is an expensive option anyway.
It appears that this is just an assertion failure, with no
consequences in non-assert builds. A snapshot used only to scan
the notify queue could not have been involved in any serialization
conflicts, so there would be nothing for
PreCommit_CheckForSerializationFailure to do except assign it a
prepareSeqNo and set the SXACT_FLAG_PREPARED flag. And given no
conflicts, neither of those omissions affect the behavior of
ReleasePredicateLocks. This admittedly once-over-lightly analysis
is backed up by the lack of field reports of trouble.
Per report from Mark Dilger. The bug is old, so back-patch to all
supported branches; but the new test case only goes back to 9.6,
for lack of adequate isolationtester infrastructure before that.
Discussion: https://postgr.es/m/3ac7f397-4d5f-be8e-f354-440020675694@gmail.com
Discussion: https://postgr.es/m/13881.1574557302@sss.pgh.pa.us
Previously DROP DATABASE generated as many XLOG_DBASE_DROP WAL records
as the number of tablespaces that the database to drop uses. This caused
the scans of shared_buffers as many times as the number of the tablespaces
during recovery because WAL replay of one XLOG_DBASE_DROP record needs
that full scan. This could make the recovery time longer especially
when shared_buffers is large.
This commit changes DROP DATABASE so that it generates only one
XLOG_DBASE_DROP record, and registers the information of all the tablespaces
into it. Then, WAL replay of XLOG_DBASE_DROP record needs full scan of
shared_buffers only once, and which may improve the recovery performance.
Author: Fujii Masao
Reviewed-by: Kirk Jamison, Simon Riggs
Discussion: https://postgr.es/m/CAHGQGwF8YwNH0ZaL+2wjZPkj+ji9UhC+Z4ScnG97WKtVY5L9iw@mail.gmail.com
By oversight 52ac6cd2d0 makes ginDeletePage() sets pd_prune_xid of page to be
deleted before entering the critical section. It appears that only versions 11
and later were affected by this oversight.
Backpatch-through: 11
We find GIN concurrency bugs from time to time. One of the problems here is
that concurrency of GIN isn't well-documented in README. So, it might be even
hard to distinguish design bugs from implementation bugs.
This commit revised concurrency section in GIN README providing more details.
Some examples are illustrated in ASCII art.
Also, this commit add the explanation of how is tuple layout in internal GIN
B-tree page different in comparison with nbtree.
Discussion: https://postgr.es/m/CAPpHfduXR_ywyaVN4%2BOYEGaw%3DcPLzWX6RxYLBncKw8de9vOkqw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Backpatch-through: 9.4
Current GIN code appears to don't handle traversing to the deleted page via
downlink. This commit fixes that by stepping right from the delete page like
we do in nbtree.
This commit also fixes setting 'deleted' flag to the GIN pages. Now other page
flags are not erased once page is deleted. That helps to keep our assertions
true if we arrive deleted page via downlink.
Discussion: https://postgr.es/m/CAPpHfdvMvsw-NcE5bRS7R1BbvA4BxoDnVVjkXC5W0Czvy9LVrg%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Backpatch-through: 9.4
When ginDeletePage() is about to delete page it locks its left sibling to revise
the rightlink. So, it locks pages in right to left manner. Int he same time
ginStepRight() locks pages in left to right manner, and that could cause a
deadlock.
This commit makes ginScanToDelete() keep exclusive lock on left siblings of
currently investigated path. That elimites need to relock left sibling in
ginDeletePage(). Thus, deadlock with ginStepRight() can't happen anymore.
Reported-by: Chen Huajun
Discussion: https://postgr.es/m/5c332bd1.87b6.16d7c17aa98.Coremail.chjischj%40163.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Backpatch-through: 10
Make it clear that _bt_pgaddtup() truncates the first data item on an
internal page because its key is supposed to be treated as minus
infinity within _bt_compare().
In detoast_attr_slice, VARSIZE_ANY was used to compute compressed length
of on-disk TOAST values. That's incorrect, because the varlena value may
be just a TOAST pointer, producing either bogus value or crashing.
This is likely why the code was crashing on big-endian machines before
540f316809 replaced the VARSIZE with VARSIZE_ANY, which however only
masked the issue.
Reported-by: Rushabh Lathia
Discussion: https://postgr.es/m/CAL-OGkthU9Gs7TZchf5OWaL-Gsi=hXqufTxKv9qpNG73d5na_g@mail.gmail.com
reloptions.h includes since ba748f7 a set of macros to handle reloption
types in a way similar to how parseRelOptions() works. They have never
been used in the core code, and we have more simple methods now to parse
and fill in rd_options for a given relation depending on its relkind, so
remove this interface to simplify things.
Per discussion between Amit Langote, Álvaro Herrera and me.
Discussion: https://postgr.es/m/CA+HiwqE6zbNO92az6pp5GiTw4tr-9rfCE0t84whQSP+YwSKjMQ@mail.gmail.com
Partitioned tables do not have relation options yet, but, similarly to
what's done for views which have their own parsing table, it could make
sense to introduce new parameters for some of the existing default ones
like fillfactor, autovacuum, etc. Splitting things has the advantage to
make the information stored in rd_options include only the necessary
information, reducing the amount of memory used for a relcache entry
with partitioned tables if new reloptions are introduced at this level.
Author: Nikolay Shaplov
Reviewed-by: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/1627387.Qykg9O6zpu@x200m
This commit changes xact_desc() so that it reports the detail information about
PREPARE TRANSACTION record, like GID (global transaction identifier),
timestamp at prepare transaction, delete-on-abort/commit relations,
XID of subtransactions, and invalidation messages. These are helpful
when diagnosing 2PC-related troubles.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Andrey Lepikhov, Kyotaro Horiguchi, Julien Rouhaud, Alvaro Herrera
Discussion: https://postgr.es/m/CAHGQGwEvhASad4JJnCv=0dW2TJypZgW_Vpb-oZik2a3utCqcrA@mail.gmail.com
An upcoming patch that adds deduplication to the nbtree AM will rely on
_bt_keep_natts_fast() understanding that differences in TOAST input
state can never affect its answer. In particular, two opclass-equal
datums (with opclasses deemed safe for deduplication) should never be
treated as unequal by _bt_keep_natts_fast() due to TOAST input
differences.
This also seems like a good idea on general principle. nbtsplitloc.c
will now occasionally make better decisions about where to split a leaf
page. The behavior of _bt_keep_natts_fast() is now somewhat closer to
the behavior of _bt_keep_natts().
Discussion: https://postgr.es/m/CAH2-Wzn3Ee49Gmxb7V1VJ3-AC8fWn-Fr8pfWQebHe8rYRxt5OQ@mail.gmail.com
If the passed in xid is the current top transaction, we can do a fast
check and exit early. This should work well for the current heap but
also works very well for proposed AMs that don't use a separate xid
for subtransactions.
Author: Ashwin Agrawal, based on a suggestion from Andres Freund
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
nbtree index builds once stashed the "minimum key" for a page, which was
used as the basis of the pivot tuple that gets placed in the next level
up (i.e. the tuple that stores the downlink to the page in question).
It doesn't quite work that way anymore, so the "minimum key" terminology
now seems misleading (these days the minimum key is actually a straight
copy of the high key from the left sibling, which is a distinct thing in
subtle but important ways). Rename this concept to "low key". This
name is a lot clearer given that there is now a sharp distinction
between pivot and non-pivot tuples. Also remove comments that describe
obsolete details about how the minimum key concept used to work.
Rather than generating the minus infinity item for the leftmost page on
a level by copying the new item and truncating that copy, simply
allocate a small buffer. The old approach confusingly created the
impression that the new item had some kind of significance. This was
another artifact of how things used to work before commits 8224de4f and
dd299df8.
If there is the WAL page that the continuation WAL record just fits within
(i.e., the continuation record ends just at the end of the page) and
the LSN in such page is specified with -s option, previously pg_waldump
caused an assertion failure. The cause of this assertion failure was that
XLogFindNextRecord() that pg_waldump -s calls mistakenly handled
such special WAL page.
This commit changes XLogFindNextRecord() so that it can handle
such WAL page correctly.
Back-patch to all supported versions.
Author: Andrey Lepikhov
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/99303554-5dd5-06e6-f943-b3005ccd6edd@postgrespro.ru
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Tom Lane
Peter Geoghegan
Fujii Masao
Robert Haas
Michael Paquier
Peter Eisentraut
Thomas Munro
Amit Kapila
Andrew Gierth
Alvaro Herrera
Heikki Linnakangas
Alexander Korotkov
Bruce Momjian
Tomas Vondra
Andres Freund