The latch infrastructure is now capable of detecting all cases where the
walsender loop needs to wake up, so there is no reason to have an arbitrary
timeout.
Also, modify the walsender loop logic to follow the standard pattern of
ResetLatch, test for work to do, WaitLatch. The previous coding was both
hard to follow and buggy: it would sometimes busy-loop despite having
nothing available to do, eg between receipt of a signal and the next time
it was caught up with new WAL, and it also had interesting choices like
deciding to update to WALSNDSTATE_STREAMING on the strength of information
known to be obsolete.
Somebody added a cross-reference to shared_preload_libraries, but wrote the
wrong variable name when they did it (and didn't bother to make it a link
either).
Spotted by Christoph Anton Mitterer.
Standby servers can now have WALSender processes, which can work with
either WALReceiver or archive_commands to pass data. Fully updated
docs, including new conceptual terms of sending server, upstream and
downstream servers. WALSenders terminated when promote to master.
Fujii Masao, review, rework and doc rewrite by Simon Riggs
Per discussion, this structure seems more understandable than what was
there before. Make config.sgml and postgresql.conf.sample agree.
In passing do a bit of editorial work on the variable descriptions.
postmaster.log", or nohup.
There was a small issue with LINUX_OOM_ADJ and silent_mode, namely that with
silent_mode the postmaster process incorrectly used the OOM settings meant
for backend processes. We certainly could've fixed that directly, but since
silent_mode was redundant anyway, we might as well just remove it.
This allows deadlock_timeout to be reduced for transactions that are
particularly likely to be involved in a deadlock, thus detecting it
more quickly. It is also potentially useful as a poor-man's deadlock
priority mechanism: a transaction with a high deadlock_timeout is less
likely to be chosen as the victim than one with a low
deadlock_timeout. Since that could be used to game the system, we
make this PGC_SUSET rather than PGC_USERSET.
At some point, it might be worth thinking about a more explicit
priority mechanism, since using this is far from fool-proof. But
let's see whether there's enough use case to justify the additional
work before we go down that route.
Noah Misch, reviewed by Shigeru Hanada
This is more consistent with what we do elsewhere, and hopefully avoids
creating the perception that current_schemas takes no arguments.
As suggested by Brendan Jurd
The recent cleanup of GUC assign hooks got rid of the kludge of using
"unknown" as a magic value for timezone and log_timezone. But I forgot
to update the documentation to match, as noted by Martin Pitt.
Also remove the material about this being an alpha release.
The notes still need a lot of work, but they're more or less presentable
as a beta version now.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
than replication_timeout (a new GUC) milliseconds. The TCP timeout is often
too long, you want the master to notice a dead connection much sooner.
People complained about that in 9.0 too, but with synchronous replication
it's even more important to notice dead connections promptly.
Fujii Masao and Heikki Linnakangas
1. Don't ignore query cancel interrupts. Instead, if the user asks to
cancel the query after we've already committed it, but before it's on
the standby, just emit a warning and let the COMMIT finish.
2. Don't ignore die interrupts (pg_terminate_backend or fast shutdown).
Instead, emit a warning message and close the connection without
acknowledging the commit. Other backends will still see the effect of
the commit, but there's no getting around that; it's too late to abort
at this point, and ignoring die interrupts altogether doesn't seem like
a good idea.
3. If synchronous_standby_names becomes empty, wake up all backends
waiting for synchronous replication to complete. Without this, someone
attempting to shut synchronous replication off could easily wedge the
entire system instead.
4. Avoid depending on the assumption that if a walsender updates
MyProc->syncRepState, we'll see the change even if we read it without
holding the lock. The window for this appears to be quite narrow (and
probably doesn't exist at all on machines with strong memory ordering)
but protecting against it is practically free, so do that.
5. Remove useless state SYNC_REP_MUST_DISCONNECT, which isn't needed and
doesn't actually do anything.
There's still some further work needed here to make the behavior of fast
shutdown plausible, but that looks complex, so I'm leaving it for a
separate commit. Review by Fujii Masao.
- Make the name of the ID tag for the GUC entry match the GUC name.
- Clarify that synchronous_replication waits for xlog flush, not receipt.
- Mention that synchronous_replication won't wait if max_wal_senders=0.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
Without this patch, when wal_receiver_status_interval=0, indicating that no
status messages should be sent, Hot Standby feedback messages are instead sent
extremely frequently.
Fujii Masao, with documentation changes by me.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Waiting for relation locks can lead to starvation - it pins down an
autovacuum worker for as long as the lock is held. But if we're doing
an anti-wraparound vacuum, then we still wait; maintenance can no longer
be put off.
To assist with troubleshooting, if log_autovacuum_min_duration >= 0,
we log whenever an autovacuum or autoanalyze is skipped for this reason.
Per a gripe by Josh Berkus, and ensuing discussion.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
Prior to 9.0, restartpoints never created, deleted, or recycled WAL
files, but now they can. This code makes log_checkpoints treat
checkpoints and restartpoints symmetrically. It also adjusts up
the documentation of the parameter to mention restartpoints.
Fujii Masao. Docs by me, as suggested by Itagaki Takahiro.
This tool makes it possible to do the pg_start_backup/
copy files/pg_stop_backup step in a single command.
There are still some steps to be done before this is a
complete backup solution, such as the ability to stream
the required WAL logs, but it's still usable, and
could do with some buildfarm coverage.
In passing, make the checkpoint request optionally
fast instead of hardcoding it.
Magnus Hagander, reviewed by Fujii Masao and Dimitri Fontaine
If wal_buffers is initially set to -1 (which is now the default), it's
replaced by 1/32nd of shared_buffers, with a minimum of 8 (the old default)
and a maximum of the XLOG segment size. The allowed range for manual
settings is still from 4 up to whatever will fit in shared memory.
Greg Smith, with implementation correction by me.
Recent versions of the Linux system header files cause xlogdefs.h to
believe that open_datasync should be the default sync method, whereas
formerly fdatasync was the default on Linux. open_datasync is a bad
choice, first because it doesn't actually outperform fdatasync (in fact
the reverse), and second because we try to use O_DIRECT with it, causing
failures on certain filesystems (e.g., ext4 with data=journal option).
This part of the patch is largely per a proposal from Marti Raudsepp.
More extensive changes are likely to follow in HEAD, but this is as much
change as we want to back-patch.
Also clean up confusing code and incorrect documentation surrounding the
fsync_writethrough option. Those changes shouldn't result in any actual
behavioral change, but I chose to back-patch them anyway to keep the
branches looking similar in this area.
In 9.0 and HEAD, also do some copy-editing on the WAL Reliability
documentation section.
Back-patch to all supported branches, since any of them might get used
on modern Linux versions.
First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.
Greg Smith
In particular, we are now more explicit about the fact that you may need
wal_sync_method=fsync_writethrough for crash-safety on some platforms,
including MaxOS X. There's also now an explicit caution against assuming
that the default setting of wal_sync_method is either crash-safe or best
for performance.
which is perhaps not a terribly good spot for it but there doesn't seem to be
a better place. Also add a source-code comment pointing out a couple reasons
for having a separate lock file. Per suggestion from Greg Smith.
Per gripe from Fujii Masao, though this is not exactly his proposed patch.
Categorize as DEVELOPER_OPTIONS and set context PGC_SIGHUP, as per Fujii,
but set the default to LOG because higher values aren't really sensible
(see the code for trace_recovery()). Fix the documentation to agree with
the code and to try to explain what the variable actually does. Get rid
of no-op calls trace_recovery(LOG), which accomplish nothing except to
demonstrate that this option confuses even its author.
Block elements with verbatim formatting (literallayout, programlisting,
screen, synopsis) should be aligned at column 0 independent of the surrounding
SGML, because whitespace is significant, and indenting them creates erratic
whitespace in the output. The CSS stylesheets already take care of indenting
the output.
Assorted markup improvements to go along with it.
I've added a quote_all_identifiers GUC which affects the behavior
of the backend, and a --quote-all-identifiers argument to pg_dump
and pg_dumpall which sets the GUC and also affects the quoting done
internally by those applications.
Design by Tom Lane; review by Alex Hunsaker; in response to bug #5488
filed by Hartmut Goebel.
Normally, we automatically restart after a backend crash, but in some
cases when PostgreSQL is invoked by clusterware it may be desirable to
suppress this behavior, so we provide an option which does this.
Since no existing GUC group quite fits, create a new group called
"error handling options" for this and the previously undocumented GUC
exit_on_error, which is now documented.
Review by Fujii Masao.
log files created by the syslogger process.
In passing, make unix_file_permissions display its value in octal, same
as log_file_mode now does.
Martin Pihlak
Per extensive discussion on pgsql-hackers. We are deliberately not
back-patching this even though the behavior of 8.3 and 8.4 is
unquestionably broken, for fear of breaking existing users of this
parameter. This incompatibility should be release-noted.
to have different values in different processes of the primary server.
Also put it into the "Streaming Replication" GUC category; it doesn't belong
in "Standby Servers" because you use it on the master not the standby.
In passing also correct guc.c's idea of wal_keep_segments' category.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
description for vacuum_defer_cleanup_age to the correct category.
Sections in postgresql.conf are also sorted in the same order with docs.
Per gripe by Fujii Masao, suggestion by Heikki Linnakangas, and patch by me.
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.