6cae9d2c10 introduced test for NULL values in KNN SP-GiST. This test relies on
undetermined ordering showing different results on various platforms. This
commit removes that test. Will be replaced with better test later.
Discussion: https://postgr.es/m/6d51305e1159241cabee132f7efc7eff%40xs4all.nl
Backpatch-through: 12
This commit improves subject in two ways:
* It removes ugliness of 02f90879e7, which stores distance values and null
flags in two separate arrays after GISTSearchItem struct. Instead we pack
both distance value and null flag in IndexOrderByDistance struct. Alignment
overhead should be negligible, because we typically deal with at most few
"col op const" expressions in ORDER BY clause.
* It fixes handling of "col op NULL" expression in KNN-SP-GiST. Now, these
expression are not passed to support functions, which can't deal with them.
Instead, NULL result is implicitly assumed. It future we may decide to
teach support functions to deal with NULL arguments, but current solution is
bugfix suitable for backpatch.
Reported-by: Nikita Glukhov
Discussion: https://postgr.es/m/826f57ee-afc7-8977-c44c-6111d18b02ec%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
Provide some documentation about the differences between XQuery
regular expressions and those supported by Spencer's regex engine.
Since SQL now exposes XQuery regexps with the LIKE_REGEX operator,
I made this a standalone section designed to help somebody who
has to translate a LIKE_REGEX query to Postgres. (Eventually we might
extend Spencer's engine to allow precise implementation of XQuery,
but not today.)
Reference that in the jsonpath docs, provide definitions of the
XQuery flag letters, and add a description of the JavaScript-inspired
string literal syntax used within jsonpath. Also point out explicitly
that backslashes used within like_regex patterns will need to be doubled.
This also syncs the docs with the decision implemented in commit
d5b90cd64 to desupport XQuery's 'x' flag for now.
Jonathan Katz and Tom Lane
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
Make the error messages around GSSAPI encryption a bit clearer. Tweak
some messages to avoid plural problems.
Also make a code change for clarity. Using "conf" for "confidential"
is quite confusing. Using "conf_state" is perhaps not much better but
that's what the GSSAPI documentation uses, so there is at least some
hope of understanding it.
It's important users be able to know (without looking at the source code)
that running DDL or DDL-like commands can interrupt autovacuum which can
lead to a lot of dead tuples and hence slower database operations.
Reported-by: James Coleman
Author: James Coleman
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAAaqYe-XYyNwML1=f=gnd0qWg46PnvD=BDrCZ5-L94B887XVxQ@mail.gmail.com
1. Commit 7086be6e3 should have documented the limitation that the direct
modification is disabled when WCO constraints are present, but didn't,
which is definitely my fault. Update the documentation (Postgres 9.6
onwards).
2. Commit fc22b6623 should have documented the limitation that the direct
modification is disabled when generated columns are defined, but
didn't. Update the documentation (Postgres 12 onwards).
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK14AYCPunLb6TRz1CQsW5Le01Z2ox8LSOKH0P-cOVDcQRA%40mail.gmail.com
The SQL spec defers to XQuery to define what the option flags are
for LIKE_REGEX patterns. XQuery says that:
* 's' allows the dot character to match newlines, which by
default it will not;
* 'm' allows ^ and $ to match at newlines, not only at the
start/end of the whole string.
Thus, these are *not* inverses as they are for the similarly-named
POSIX options, and neither one corresponds to the POSIX 'n' option.
Fortunately, Spencer's library does expose these two behaviors as
separately twiddlable flags, so we just have to fix the mapping from
JSP flag bits to REG flag bits. I also chose to rename the symbol
for 's' to DOTALL, to make it clearer that it's not the inverse
of MLINE.
Also, XQuery says that if the 'q' flag "is used together with the m, s,
or x flag, that flag has no effect". I read this as saying that 'q'
overrides the other flags; whoever wrote our code seems to have read
it backwards.
Lastly, while XQuery's 'x' flag is related to what Spencer's code
does for REG_EXPANDED, it's not the same or a subset. It seems best
to treat XQuery's 'x' as unimplemented for now. Maybe later we can
expand our regex code to offer 'x'-style parsing as a separate option.
While at it, refactor the jsonpath code so that (a) there's only
one copy of the flag transformation logic not two, and (b) the
processing of flags is independent of the order in which the flags
are written.
We need some documentation updates to go with this, but I'll
tackle that separately.
Back-patch to v12 where this code originated.
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
Reference: https://www.w3.org/TR/2017/REC-xpath-functions-31-20170321/#flags
Commit d7f8d26d9 added new tests to the stats_ext regression test that
included creating a view in the public schema, without realising that
the stats_ext test runs in the same parallel group as the rules test,
which makes doing that unsafe.
This led to intermittent failures of the rules test on the buildfarm,
although I wasn't able to reproduce that locally. Fix by creating the
view in a different schema.
Tomas Vondra and Dean Rasheed, report and diagnosis by Thomas Munro.
Discussion: https://postgr.es/m/CA+hUKGKX9hFZrYA7rQzAMRE07L4hziCc-nO_b3taJpiuKyLLxg@mail.gmail.com
PostgreSQL has been unusable when built with xlc 13 and newer, which are
incompatible with our use of __fetch_and_add(). Back-patch to 9.5,
which introduced pg_atomic_fetch_add_u32().
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20190831071157.GA3251746@rfd.leadboat.com
Most WAL records are ignored in early SnapBuild snapshot build phases.
But it's critical to process some of them, so that later messages have
the correct transaction state after the snapshot is completely built; in
particular, XLOG_XACT_ASSIGNMENT messages are critical in order for
sub-transactions to be correctly assigned to their parent transactions,
or at least one assert misbehaves, as reported by Ildar Musin.
Diagnosed-by: Masahiko Sawada
Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAONYFtOv+Er1p3WAuwUsy1zsCFrSYvpHLhapC_fMD-zNaRWxYg@mail.gmail.com
Lack of parens in the definitions could cause a statement using these
macros to have unexpected semantics. In current code no bug is
apparent, but best to fix the definitions to avoid problems down the
line.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/19795.1568400476@sss.pgh.pa.us
The progress state was being clobbered once the first index completed
being rebuilt, causing the final phases of the operation not show
anything in the progress view. This was inadvertently broken in
03f9e5cba0, which added progress tracking for REINDEX.
(The reason this bugfix is this small is that I had already noticed this
problem when writing monitoring for CREATE INDEX, and had already worked
around it, as can be seen in discussion starting at
https://postgr.es/m/20190329150218.GA25010@alvherre.pgsql Fixing the
problem is just a matter of fixing one place touched by the REINDEX
monitoring.)
Reported by: Álvaro Herrera
Author: Álvaro Herrera
Discussion: https://postgr.es/m/20190801184333.GA21369@alvherre.pgsql
Include newitemoff in rmgr desc output for nbtree page split records.
In passing, correct an obsolete comment that claimed that newitemoff is
only logged for _L variant nbtree page split WAL records.
Both issues were oversights in commit 2c03216d83, which revamped the
WAL format.
Author: Peter Geoghegan
Backpatch: 9.5-, where the WAL format was revamped.
Since WITH CHECK OPTION was introduced, ExecInitModifyTable has
initialized WCO expressions with the wrong plan node as parent -- that is,
it passed its input subplan not the ModifyTable node itself. Up to now
we thought this was harmless, but bug #16006 from Vinay Banakar shows it's
not: if the input node is a SubqueryScan then ExecInitWholeRowVar can get
confused into doing the wrong thing. (The fact that ExecInitWholeRowVar
contains such logic is certainly a horrid kluge that doesn't deserve to
live, but figuring out another way to do that is a task for some other day.)
Andres had already noticed the wrong-parent mistake and fixed it in commit
148e632c0, but not being aware of any user-visible consequences, he quite
reasonably didn't back-patch. This patch is simply a back-patch of
148e632c0, plus addition of a test case based on bug #16006. I also added
the test case to v12/HEAD, even though the bug is already fixed there.
Back-patch to all supported branches. 9.4 lacks RLS policies so the
new test case doesn't work there, but I'm pretty sure a test could be
devised based on using a whole-row Var in a plain WITH CHECK OPTION
condition. (I lack the cycles to do so myself, though.)
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/16006-99290d2e4642cbd5@postgresql.org
Discussion: https://postgr.es/m/20181205225213.hiwa3kgoxeybqcqv@alap3.anarazel.de
The example used to explain 'Looping Through Query Results' uses
pseudo-materialized views. Replace it with a more up-to-date example
which does the same thing with actual materialized views, which have
been available since PostgreSQL 9.3.
In the passing, change '%' as format specifier instead of '%s' as is used
in other examples in plpgsql.sgml.
Reported-by: Ian Barwick
Author: Ian Barwick
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/9a70d393-7904-4918-c97c-649f6d114b6a@2ndquadrant.com
Depending on the system used, t/*.pl may not be expanded into a list of
tests which can be consumed by prove when attempting to run TAP tests on
a given path. Fix that by using glob() directly in the script, to make
sure that a complete list of tests is provided. This has not proved to
be an issue with MSVC as the list was properly expanded, but it is on
Linux with perl's system().
This is extracted from a larger patch.
Author: Tom Lane
Discussion: https://postgr.es/m/6628.1567958876@sss.pgh.pa.us
Backpatch-through: 9.4
For its entire existence, isolationtester.c has forced client_min_messages
to WARNING, but that seems like a very poor choice of test design. It
should be up to individual test scripts to manage whether they emit notices
and to ensure that the results are stable. (There were no NOTICE messages
in the original set of isolation tests, so this was certainly dead code
when committed, but perhaps it was needed at some earlier point.)
It's possible that the original motivation was due to platform-dependent
variations in the timing of stdout vs. stderr output. That should be
moot since commits 73bcb76b7/6eda3e9c2, but just in case, adjust
isotesterNoticeProcessor to print to stdout not stderr. (stderr seems
like the wrong thing anyway: it should be for error printouts not expected
test output.)
Back-patch of commit ebd499282 into v12. I'll separately push this
into older branches, but this is as much change as v12 needs.
Discussion: https://postgr.es/m/14616.1564251339@sss.pgh.pa.us
Discussion: https://postgr.es/m/E1i7IqC-0000Uc-5H@gemulon.postgresql.org
If a test sends a notice just before blocking, it's possible on
slow machines for isolationtester to detect the blocked state before
it's consumed the notice. (For this to happen, the notice would have
to arrive after isolationtester has waited for data for 10ms, so on
fast/lightly-loaded machines it's hard to reproduce the failure.)
But, if we have seen the backend as blocked, it's certainly already
sent any notices it's going to send. Therefore, one more round of
PQconsumeInput and PQisBusy should be enough to collect and process
any such notices.
Back-patch of 30717637c into v12. We're still discussing whether
to back-patch this further and/or back-patch some other recent
isolationtester fixes, but this much is provably necessary to
make the test cases added by 27cc7cd2b stable in v12.
Discussion: https://postgr.es/m/14616.1564251339@sss.pgh.pa.us
Discussion: https://postgr.es/m/E1i7IqC-0000Uc-5H@gemulon.postgresql.org
Don't just assume that the next port is free; it might not be, or
if we're really unlucky it might even be out of the TCP range.
Do it honestly with two get_free_port() calls instead.
This is surely a pretty low-probability problem, but I think it
explains a buildfarm failure seen today, so let's fix it.
Back-patch to v11 where this script was added.
Discussion: https://postgr.es/m/25124.1568052346@sss.pgh.pa.us
Modern versions of msys2 have changed the treatment of "cmd /c" so that
the runtime will try to convert the switch to a native file path. This
patch adds a setting to inhibit that behaviour.
Discussion: https://postgr.es/m/3227042f-cfcc-745a-57dd-fb8c471f8ddf@2ndQuadrant.com
Backpatch to all live branches.
In ad0bda5d24 I changed the EvalPlanQual machinery to store
substitution tuples in slot, instead of using plain HeapTuples. The
main motivation for that was that using HeapTuples will be inefficient
for future tableams. But it turns out that that conversion was buggy
for non-locking rowmarks - the wrong tuple descriptor was used to
create the slot.
As a secondary issue 5db6df0c0 changed ExecLockRows() to begin EPQ
earlier, to allow to fetch the locked rows directly into the EPQ
slots, instead of having to copy tuples around. Unfortunately, as Tom
complained, that forces some expensive initialization to happen
earlier.
As a third issue, the test coverage for EPQ was clearly insufficient.
Fixing the first issue is unfortunately not trivial: Non-locked row
marks were fetched at the start of EPQ, and we don't have the type
information for the rowmarks available at that point. While we could
change that, it's not easy. It might be worthwhile to change that at
some point, but to fix this bug, it seems better to delay fetching
non-locking rowmarks when they're actually needed, rather than
eagerly. They're referenced at most once, and in cases where EPQ
fails, might never be referenced. Fetching them when needed also
increases locality a bit.
To be able to fetch rowmarks during execution, rather than
initialization, we need to be able to access the active EPQState, as
that contains necessary data. To do so move EPQ related data from
EState to EPQState, and, only for EStates creates as part of EPQ,
reference the associated EPQState from EState.
To fix the second issue, change EPQ initialization to allow use of
EvalPlanQualSlot() to be used before EvalPlanQualBegin() (but
obviously still requiring EvalPlanQualInit() to have been done).
As these changes made struct EState harder to understand, e.g. by
adding multiple EStates, significantly reorder the members, and add a
lot more comments.
Also add a few more EPQ tests, including one that fails for the first
issue above. More is needed.
Reported-By: yi huang
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion:
https://postgr.es/m/CAHU7rYZo_C4ULsAx_LAj8az9zqgrD8WDd4hTegDTMM1LMqrBsg@mail.gmail.comhttps://postgr.es/m/24530.1562686693@sss.pgh.pa.us
Backpatch: 12-, where the EPQ changes were introduced
f2e40380 introduces support of non-key attributes in GiST indexes. Then if
get_index_column_opclass() is asked by gistproperty() to get an opclass of
non-key column, it returns garbage past oidvector value. This commit fixes
that by making get_index_column_opclass() return InvalidOid in this case.
Discussion: https://postgr.es/m/20190902231948.GA5343%40alvherre.pgsql
Author: Nikita Glukhov, Alexander Korotkov
Backpatch-through: 12
Some of these are quite old, but that doesn't make them not bugs.
We'd rather report a failure via elog than SIGSEGV.
While at it, uniformly spell the error check as !RelationIsValid(rel)
rather than a bare rel == NULL test. The machine code is the same
but it seems better to be consistent.
Coverity complained about this today, not sure why, because the
mistake is in fact old.
In order to implement NULL LAST semantic GiST previously assumed distance to
the NULL value to be Inf. However, our distance functions can return Inf and
NaN for non-null values. In such cases, NULL LAST semantic appears to be
broken. This commit fixes that by introducing separate array of null flags for
distances.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/CAPpHfdsNvNdA0DBS%2BwMpFrgwT6C3-q50sFVGLSiuWnV3FqOJuQ%40mail.gmail.com
Author: Alexander Korotkov
Backpatch-through: 9.4
Previously plain float comparison was used in GiST pairing heap. Such
comparison doesn't provide proper ordering for value sets containing Inf and Nan
values. This commit fixes that by usage of float8_cmp_internal(). Note, there
is remaining problem with NULL distances, which are represented as Inf in
pairing heap. It would be fixes in subsequent commit.
Backpatch to all supported versions.
Reported-by: Andrey Borodin
Discussion: https://postgr.es/m/CAPpHfdsNvNdA0DBS%2BwMpFrgwT6C3-q50sFVGLSiuWnV3FqOJuQ%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Heikki Linnakangas
Backpatch-through: 9.4
When using COMMIT AND CHAIN or ROLLBACK AND CHAIN not in an explicit
transaction block, the previous implementation would leave a
transaction block active in the ROLLBACK case but not the COMMIT case.
To fix for now, error out when using these commands not in an explicit
transaction block. This restriction could be lifted if a sensible
definition and implementation is found.
Bug: #15977
Author: fn ln <emuser20140816@gmail.com>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Commit 6f6b99d13 stuck an INFO message into the fast path for
checking partition constraints, for no very good reason except
that it made it easy for the regression tests to verify that
that path was taken. Assorted later patches did likewise,
increasing the unsuppressable-chatter level from ALTER TABLE
even more. This isn't good for the user experience, so let's
drop these messages down to DEBUG1 where they belong. So as
not to have a loss of test coverage, create a TAP test that
runs the relevant queries with client_min_messages = DEBUG1
and greps for the expected messages.
This testing method is a bit brute-force --- in particular,
it duplicates the execution of a fair amount of the core
create_table and alter_table tests. We experimented with
other solutions, but running any significant amount of
standard testing with client_min_messages = DEBUG1 seems
to have a lot of output-stability pitfalls, cf commits
bbb96c370 and 5655565c0. Possibly at some point we'll look
into whether we can reduce the amount of test duplication.
Backpatch into v12, because some of these messages are new
in v12 and we don't really want to ship it that way.
Sergei Kornilov
Discussion: https://postgr.es/m/81911511895540@web58j.yandex.ru
Discussion: https://postgr.es/m/4859321552643736@myt5-02b80404fd9e.qloud-c.yandex.net
Copy-edit or rewrite some items, add some items that I thought
deserved documenting, remove some others that didn't (notably,
I'm not on board with documenting documentation changes), fix
some poorly-pointed links, move some items to other sections,
etc etc.
I still want to review the rest of the notes, but this seems like the
minimum work required to prepare for beta4.
Major-enhancements text, and a couple of other fixes, from Jonathan Katz
(with minor copy-editing by me).
