PQnotifies() is defined to just process already-read data, not try to read
any more from the socket. (This is a debatable decision, perhaps, but I'm
hesitant to change longstanding library behavior.) The documentation has
long recommended calling PQconsumeInput() before PQnotifies() to ensure
that any already-arrived message would get absorbed and processed.
However, psql did not get that memo, which explains why it's not very
reliable about reporting notifications promptly.
Also, most (not quite all) callers called PQconsumeInput() just once before
a PQnotifies() loop. Taking this recommendation seriously implies that we
should do PQconsumeInput() before each call. This is more important now
that we have "payload" strings in notification messages than it was before;
that increases the probability of having more than one packet's worth
of notify messages. Hence, adjust code as well as documentation examples
to do it like that.
Back-patch to 9.5 to match related server fixes. In principle we could
probably go back further with these changes, but given lack of field
complaints I doubt it's worthwhile.
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
When an error occurs during a benchmark run, exit with a nonzero exit
code and write a message at the end. Previously, it would just print
the error message when it happened but then proceed to print the run
summary normally and exit with status 0. To still allow
distinguishing setup from run-time errors, we use exit status 2 for
the new state, whereas existing errors during pgbench initialization
use exit status 1.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
With the PostgreSQL 11 release notes acknowledgments list, FOP reported
WARNING: Glyph "?" (0x144, nacute) not available in font "Times-Roman".
WARNING: Glyph "?" (0x15e, Scedilla) not available in font "Times-Roman".
WARNING: Glyph "?" (0x15f, scedilla) not available in font "Times-Roman".
WARNING: Glyph "?" (0x131, dotlessi) not available in font "Times-Roman".
This is because we have some new contributors whose names use letters
that we haven't used before, and apparently FOP can't handle them out
of the box.
For now, just fix this by "unaccenting" those names. In the future,
maybe this can be fixed better with a different font configuration.
There is also another warning
WARNING: Glyph "?" (0x3c0, pi) not available in font "Times-Roman".
but that existed in previous releases and is not touched here.
Set the release date. Do a bunch of copy-editing and markup improvement,
rearrange some stuff into what seemed a more sensible order, move some
things that did not seem to be in the right section.
This function lists the contents of the WAL archive status directory,
and is intended to be used by monitoring tools. Unlike pg_ls_dir(),
access to it can be granted to non-superusers so that those monitoring
tools can observe the principle of least privilege. Access is also
given by default to members of pg_monitor.
Author: Christoph Moench-Tegeder
Reviewed-by: Aya Iwata
Discussion: https://postgr.es/m/20180930205920.GA64534@elch.exwg.net
Originally committed as 15bc038f (plus some follow-ups), this was
reverted in 28e07270 due to a problem discovered in parallel
workers. This new version corrects that problem by sending the
list of uncommitted enum values to parallel workers.
Here follows the original commit message describing the change:
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Author: Andrew Dunstan and Tom Lane, with parallel query fix by Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D0Ei7g6PaNTbcmAh9tCRahQrk%3Dr5ZWLD-jr7hXweYX3yg%40mail.gmail.com
Discussion: https://postgr.es/m/4075.1459088427%40sss.pgh.pa.us
Historically we forbade datatype-specific comparison functions from
returning INT_MIN, so that it would be safe to invert the sort order
just by negating the comparison result. However, this was never
really safe for comparison functions that directly return the result
of memcmp(), strcmp(), etc, as POSIX doesn't place any such restriction
on those library functions. Buildfarm results show that at least on
recent Linux on s390x, memcmp() actually does return INT_MIN sometimes,
causing sort failures.
The agreed-on answer is to remove this restriction and fix relevant
call sites to not make such an assumption; code such as "res = -res"
should be replaced by "INVERT_COMPARE_RESULT(res)". The same is needed
in a few places that just directly negated the result of memcmp or
strcmp.
To help find places having this problem, I've also added a compile option
to nbtcompare.c that causes some of the commonly used comparators to
return INT_MIN/INT_MAX instead of their usual -1/+1. It'd likely be
a good idea to have at least one buildfarm member running with
"-DSTRESS_SORT_INT_MIN". That's far from a complete test of course,
but it should help to prevent fresh introductions of such bugs.
This is a longstanding portability hazard, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/20180928185215.ffoq2xrq5d3pafna@alap3.anarazel.de
This lists the contents of a temporary directory associated to a given
tablespace, useful to get information about on-disk consumption caused
by temporary files used by a session query. By default, pg_default is
scanned, and a tablespace can be specified as argument.
This function is intended to be used by monitoring tools, and, unlike
pg_ls_dir(), access to them can be granted to non-superusers so that
those monitoring tools can observe the principle of least privilege.
Access is also given by default to members of pg_monitor.
Author: Nathan Bossart
Reviewed-by: Laurenz Albe
Discussion: https://postgr.es/m/92F458A2-6459-44B8-A7F2-2ADD3225046A@amazon.com
When specified, this option allows VACUUM to skip the work on a relation
if there is a conflicting lock on it when trying to open it at the
beginning of its processing.
Similarly to autovacuum, this comes with a couple of limitations while
the relation is processed which can cause the process to still block:
- when opening the relation indexes.
- when acquiring row samples for table inheritance trees, partition trees
or certain types of foreign tables, and that a lock is taken on some
leaves of such trees.
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Andres Freund, Masahiko Sawada
Discussion: https://postgr.es/m/9EF7EBE4-720D-4CF1-9D0E-4403D7E92990@amazon.com
Discussion: https://postgr.es/m/20171201160907.27110.74730@wrigleys.postgresql.org
I (Andres) was more than a bit hasty in committing 33001fd7a7
after last minute changes, leading to a number of problems (jit output
was only shown for JIT in parallel workers, and just EXPLAIN without
ANALYZE didn't work). Lukas luckily found these issues quickly.
Instead of combining instrumentation in in standard_ExecutorEnd(), do
so on demand in the new ExplainPrintJITSummary().
Also update a documentation example of the JIT output, changed in
52050ad8eb.
Author: Lukas Fittl, with minor changes by me
Discussion: https://postgr.es/m/CAP53PkxmgJht69pabxBXJBM+0oc6kf3KHMborLP7H2ouJ0CCtQ@mail.gmail.com
Backpatch: 11, where JIT compilation was introduced
The previous commit wasn't careful enough to remove all traces of
TupleDescGetSlot().
Besides fixing the oversight of not removing TupleDescGetSlot()'s
declaration, this also removes FuncCallContext->slot. That was
documented to be for use in combination with TupleDescGetSlot(), a
cursory search over extensions finds no users, and there doesn't seem
to be convincing reasons to keep it around. If we later in the v12
release cycle find users, we can re-consider this part of the commit.
Reported-By: Michael Paquier
Discussion: https://postgr.es/m/20180926000413.GC1659@paquier.xyz
We haven't touched these since text search functionality landed in core
in 2007 :-(. While the upstream project isn't a beehive of activity,
they do make additions and bug fixes from time to time. Update our
copies of these files.
Also update our documentation about how to keep things in sync, since
they're not making distribution tarballs these days. Fortunately,
their source code turns out to be a breeze to build.
Notable changes:
* The non-UTF8 version of the hungarian stemmer now works in LATIN2
not LATIN1.
* New stemmers have appeared for arabic, indonesian, irish, lithuanian,
nepali, and tamil. These all work in UTF8, and the indonesian and
irish ones also work in LATIN1.
(There are some new stemmers that I did not incorporate, mainly because
their names don't match the underlying languages, suggesting that they're
not to be considered mainstream.)
Worth noting: the upstream Nepali dictionary was contributed by
Arthur Zakirov.
initdb forced because the contents of snowball_create.sql have
changed.
Still TODO: see about updating the stopword lists.
Arthur Zakirov, minor mods and doc work by me
Discussion: https://postgr.es/m/20180626122025.GA12647@zakirov.localdomain
Discussion: https://postgr.es/m/20180219140849.GA9050@zakirov.localdomain
aclitem functions and operators have been heretofore undocumented.
Fix that. While at it, ensure the non-operator aclitem functions have
pg_description strings.
Does not seem worthwhile to back-patch.
Author: Fabien Coelho, with pg_description from John Naylor, and significant
refactoring and editorialization by me.
Reviewed by: Tom Lane
Discussion: https://postgr.es/m/flat/alpine.DEB.2.21.1808010825490.18204%40lancre
Being able to use a value that can be changed on a connection basis is
useful with clusters distributed geographically, and makes failure
detection more flexible. A note is added in the documentation about the
use of "options" in primary_conninfo, which can be hard to grasp for
newcomers with the need of two single quotes when listing a set of
parameters.
Author: Tsunakawa Takayuki
Reviewed-by: Masahiko Sawada, Michael Paquier
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1FAAD3AE@G01JPEXMBYT05
JIT was disabled by default in a PG 11 in a separate commit that will
normally not appear in the PG 12 git logs. Therefore, create a PG 12
document and mention the fact that JIT is enabled by default in this
release. (A similar change in parallelism was missed in a prior
release.)
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20180922000554.qukbhhlagpnopvko@alap3.anarazel.de
Backpatch-through: head
This eliminates some more tedium in adding new catalog entries,
specifically the need to set up an array type when adding a new
built-in data type. Now it's sufficient to assign an OID for the
array type and write it in an "array_type_oid" metadata field.
You don't have to fill the base type's typarray link explicitly, either.
No catversion bump since the contents of pg_type aren't changed.
(Well, their order might be different, but that doesn't matter.)
John Naylor, reviewed and whacked around a bit by
Dagfinn Ilmari Mannsåker, and some more by me.
Discussion: https://postgr.es/m/CAJVSVGVTb6m9pJF49b3SuA8J+T-THO9c0hxOmoyv-yGKh-FbNg@mail.gmail.com
Currently, KNN searches were supported only by GiST. SP-GiST also capable to
support them. This commit implements that support. SP-GiST scan stack is
replaced with queue, which serves as stack if no ordering is specified. KNN
support is provided for three SP-GIST opclasses: quad_point_ops, kd_point_ops
and poly_ops (catversion is bumped). Some common parts between GiST and SP-GiST
KNNs are extracted into separate functions.
Discussion: https://postgr.es/m/570825e8-47d0-4732-2bf6-88d67d2d51c8%40postgrespro.ru
Author: Nikita Glukhov, Alexander Korotkov based on GSoC work by Vlad Sterzhanov
Review: Andrey Borodin, Alexander Korotkov
Per discussion, JIT isn't quite mature enough to ship enabled-by-default.
I failed to resist the temptation to do a bunch of copy-editing on the
related documentation. Also, clean up some inconsistencies in which
section of config.sgml the JIT GUCs are documented in vs. what guc.c
and postgresql.config.sample had.
Discussion: https://postgr.es/m/20180914222657.mw25esrzbcnu6qlu@alap3.anarazel.de
to_timestamp()/to_date() functions were introduced mainly for Oracle
compatibility, and became very popular among PostgreSQL users. However, some
behavior of to_timestamp()/to_date() functions are both incompatible with Oracle
and confusing for our users. This behavior is related to handling of spaces and
separators in non FX (fixed format) mode. This commit reworks this behavior
making less confusing, better documented and more compatible with Oracle.
Nevertheless, there are still following incompatibilities with Oracle.
1) We don't insist that there are no format string patterns unmatched to
input string.
2) In FX mode we don't insist space and separators in format string to exactly
match input string.
3) When format string patterns are divided by mix of spaces and separators, we
don't distinguish them, while Oracle takes into account only last group of
spaces/separators.
Discussion: https://postgr.es/m/1873520224.1784572.1465833145330.JavaMail.yahoo%40mail.yahoo.com
Author: Artur Zakirov, Alexander Korotkov, Liudmila Mantrova
Review: Amul Sul, Robert Haas, Tom Lane, Dmitry Dolgov, David G. Johnston
Commit be54b3777 failed on gmake 3.80 due to a chained conditional,
which on closer examination could be removed entirely with some
refactoring elsewhere for a net simplification and more robustness
against empty expansions. Along the way, add some more comments.
Also make explicit in the documentation and comments that built
headers are not removed by 'make clean', since we don't typically want
that for headers generated by a separate ./configure step, and it's
much easier to add your own 'distclean' rule or use EXTRA_CLEAN than
to try and override a deletion rule in pgxs.mk.
Per buildfarm member prariedog and comments by Michael Paquier, though
all the actual changes are my fault.
Since the fixes for CVE-2018-1058, we've advised people to schema-qualify
function references in order to fix failures in code that executes under
a minimal search_path setting. However, that's insufficient to make the
single-argument form of unaccent() work, because it looks up the "unaccent"
text search dictionary using the search path.
The most expedient answer seems to be to remove the search_path dependency
by making it look in the same schema that the unaccent() function itself
is declared in. This will definitely work for the normal usage of this
function with the unaccent dictionary provided by the extension.
It's barely possible that there are people who were relying on the
search-path-dependent behavior to select other dictionaries with the same
name; but if there are any such people at all, they can still get that
behavior by writing unaccent('unaccent', ...), or possibly
unaccent('unaccent'::text::regdictionary, ...) if the lookup has to be
postponed to runtime.
Per complaint from Gunnlaugur Thor Briem. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAPs+M8LCex6d=DeneofdsoJVijaG59m9V0ggbb3pOH7hZO4+cQ@mail.gmail.com
Commit df163230b overlooked the case that an out-of-tree extension
might need to build its header files (e.g. via ./configure). If it is
also doing a VPATH build, the HEADERS_* rules in the original commit
would then fail to find the files, since they would be looking only
under $(srcdir) and not in the build directory.
Fix by adding HEADERS_built and HEADERS_built_$(MODULE) which behave
like DATA_built in that they look in the build dir rather than the
source dir (and also make the files dependencies of the "all" target).
No Windows support appears to be needed for this, since it is only
relevant to out-of-tree builds (no support exists in Mkvcbuild.pm to
build extension header files in any case).
pg_get_object_address and pg_identify_object_as_address are supposed
to be inverses, but they disagreed as to the names of the arguments
representing the textual form of an object address. Moreover, the
documented argument names didn't agree with reality at all, either
for these functions or pg_identify_object.
In HEAD and v11, I think we can get away with renaming the input
arguments of pg_get_object_address to match the outputs of
pg_identify_object_as_address. In theory that might break queries
using named-argument notation to call pg_get_object_address, but
it seems really unlikely that anybody is doing that, or that they'd
have much trouble adjusting if they were. In older branches, we'll
just live with the lack of consistency.
Aside from fixing the documentation of these functions to match reality,
I couldn't resist the temptation to do some copy-editing.
Per complaint from Jean-Pierre Pelletier. Back-patch to 9.5 where these
functions were introduced. (Before v11, this is a documentation change
only.)
Discussion: https://postgr.es/m/CANGqjDnWH8wsTY_GzDUxbt4i=y-85SJreZin4Hm8uOqv1vzRQA@mail.gmail.com
The previous description was unclear. Also add a third example, change
use of time zone acronyms to more verbose descriptions, and add a
mention that using 'time' with AT TIME ZONE uses the current time zone
rules.
Backpatch-through: 9.3
It's been true for a long time that we expect names of table and domain
constraints to be unique among the constraints of that table or domain.
However, the enforcement of that has been pretty haphazard, and it missed
some corner cases such as creating a CHECK constraint and then an index
constraint of the same name (as per recent report from André Hänsel).
Also, due to the lack of an actual unique index enforcing this, duplicates
could be created through race conditions.
Moreover, the code that searches pg_constraint has been quite inconsistent
about how to handle duplicate names if one did occur: some places checked
and threw errors if there was more than one match, while others just
processed the first match they came to.
To fix, create a unique index on (conrelid, contypid, conname). Since
either conrelid or contypid is zero, this will separately enforce
uniqueness of constraint names among constraints of any one table and any
one domain. (If we ever implement SQL assertions, and put them into this
catalog, more thought might be needed. But it'd be at least as reasonable
to put them into a new catalog; having overloaded this one catalog with
two kinds of constraints was a mistake already IMO.) This index can replace
the existing non-unique index on conrelid, though we need to keep the one
on contypid for query performance reasons.
Having done that, we can simplify the logic in various places that either
coped with duplicates or neglected to, as well as potentially improve
lookup performance when searching for a constraint by name.
Also, as per our usual practice, install a preliminary check so that you
get something more friendly than a unique-index violation report in the
case complained of by André. And teach ChooseIndexName to avoid choosing
autogenerated names that would draw such a failure.
While it's not possible to make such a change in the back branches,
it doesn't seem quite too late to put this into v11, so do so.
Discussion: https://postgr.es/m/0c1001d4428f$0942b430$1bc81c90$@webkr.de
This column was added in commit 8224de4f42 ("Indexes with INCLUDE
columns and their support in B-tree") to ease writing the ruleutils.c
supporting code for that feature, but it turns out to be unnecessary --
we can do the same thing with just one more syscache lookup.
Even the documentation for the new column being removed in this commit
is awkward.
Discussion: https://postgr.es/m/20180902165018.33otxftp3olgtu4t@alvherre.pgsql
This table claimed that JOHAB could be used as a server encoding, which
was true originally but hasn't been true since 8.3. It also lacked
entries for EUC_JIS_2004 and SHIFT_JIS_2004.
JOHAB problem noted by Lars Kanis, the others by me.
Discussion: https://postgr.es/m/c0f514a1-b7a9-b9ea-1c02-c34aead56c06@greiz-reinsdorf.de
Currently there are two ways to trigger log rotation in logging collector
process: call pg_rotate_logfile() SQL-function or send SIGUSR1 signal directly
to logging collector process. However, it's nice to have more suitable way
for external tools to do that, which wouldn't require SQL connection or
knowledge of logging collector pid. This commit implements triggering log
rotation by "pg_ctl logrotate" command.
Discussion: https://postgr.es/m/20180416.115435.28153375.horiguchi.kyotaro%40lab.ntt.co.jp
Author: Kyotaro Horiguchi, Alexander Kuzmenkov, Alexander Korotkov
Using -d is odd, because we normally reserve that for a database
argument, so rename it to -v and add long version --verbose.
Also, reduce it to emit one line per file checked rather than one line
per block.
Per a complaint from Michael Banck.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Michael Banck <michael.banck@credativ.de>
Discussion: https://postgr.es/m/20180827113411.GA22768@nighthawk.caipicrew.dd-dns.de
Like oid2name, vacuumlo has been lacking consistency with other
utilities for its options:
- Connection options gain long aliases.
- Document environment variables which could be used: PGHOST, PGPORT and
PGUSER.
Documentation and code is reordered to be more consistent. A basic set
of TAP tests has been added while on it.
Author: Tatsuro Yamada
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/c7e7f25c-1747-cd0f-9335-390bc97b2db5@lab.ntt.co.jp
oid2name has done little effort to keep an interface consistent with
other binary utilities:
- -H was used instead of -h/-host. This option is now marked as
deprecated, still its output is accepted to be backward-compatible.
- -P has been removed from the code, and was still documented.
- All options gain long aliases, making connection options more similar
to other binaries.
- Document environment variables which could be used: PGHOST, PGPORT and
PGUSER.
A basic set of TAP tests is added on the way, and documentation is
cleaned up to be more consistent with other things.
Author: Tatsuro Yamada
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/c7e7f25c-1747-cd0f-9335-390bc97b2db5@lab.ntt.co.jp
Mention that "Latest checkpoint location" will not match in pg_upgrade
if the standby server is still running during the upgrade, which is
possible. "Match" text first appeared in PG 9.5.
Reported-by: Paul Bonaud
Discussion: https://postgr.es/m/c7268794-edb4-1772-3bfd-04c54585c24e@trainline.com
Backpatch-through: 9.5
In 86d78ef50e I enabled configure to check for C99 support, with the
goal of checking which platforms support C99. While there are a few
machines without C99 support among our buildfarm animals,
de-supporting them for v12 was deemed acceptable.
While not tested in aforementioned commit, the biggest increase in
minimum compiler version comes from MSVC, which gained C99 support
fairly late. The subset in MSVC 2013 is sufficient for our needs, at
this point. While that is a significant increase in minimum version,
the existing windows binaries are already built with a new enough
version.
Make configure error out if C99 support could not be detected. For
MSVC builds, increase the minimum version to 2013.
The increase to MSVC 2013 allows us to get rid of VCBuildProject.pm,
as that was only required for MSVC 2005/2008.
Author: Andres Freund
Discussion: https://postgr.es/m/97d4b165-192d-3605-749c-f614a0c4e783@2ndquadrant.com
Historically, we looked up the target hostname in connectDBStart, so that
PQconnectPoll did not need to do DNS name resolution. The patches that
added multiple-target-host support to libpq preserved this division of
labor; but it's really nonsensical now, because it means that if any one
of the target hosts fails to resolve in DNS, the connection fails. That
negates the no-single-point-of-failure goal of the feature. Additionally,
DNS lookups aren't exactly cheap, but the code did them all even if the
first connection attempt succeeds.
Hence, rearrange so that PQconnectPoll does the lookups, and only looks
up a hostname when it's time to try that host. This does mean that
PQconnectPoll could block on a DNS lookup --- but if you wanted to avoid
that, you should be using hostaddr, as the documentation has always
specified. It seems fairly unlikely that any applications would really
care whether the lookup occurs inside PQconnectStart or PQconnectPoll.
In addition to calling out that fact explicitly, do some other minor
wordsmithing in the docs around the multiple-target-host feature.
Since this seems like a bug in the multiple-target-host feature,
backpatch to v10 where that was introduced. In the back branches,
avoid moving any existing fields of struct pg_conn, just in case
any third-party code is looking into that struct.
Tom Lane, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/4913.1533827102@sss.pgh.pa.us
Since procedures are now a different thing from functions, change the
CREATE TRIGGER and CREATE EVENT TRIGGER syntax to use FUNCTION in the
clause that specifies the function. PROCEDURE is still accepted for
compatibility.
pg_dump and ruleutils.c output is not changed yet, because that would
require a change in information_schema.sql and thus a catversion change.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
Since procedures are now a different thing from functions, change the
CREATE OPERATOR syntax to use FUNCTION in the clause that specifies the
function. PROCEDURE is still accepted for compatibility.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
Historically, the term procedure was used as a synonym for function in
Postgres/PostgreSQL. Now we have procedures as separate objects from
functions, so we need to clean up the documentation to not mix those
terms.
In particular, mentions of "trigger procedures" are changed to "trigger
functions", and access method "support procedures" are changed to
"support functions". (The latter already used FUNCTION in the SQL
syntax anyway.) Also, the terminology in the SPI chapter has been
cleaned up.
A few tests, examples, and code comments are also adjusted to be
consistent with documentation changes, but not everything.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
This para is obsolete, first because nobody is using Solaris 7 anymore,
and second because if someone was, configure should catch the snprintf
buffer overrun problem automatically (since commit 9bed827b1), and third
because this is incorrect advice about how to manually force use of
snprintf.c anyway, and has been so at least since commit 3bc6bdf32.
The lack of complaints about it reinforces the conclusion that Solaris 7
no longer exists in the wild; so I don't feel a need to insert correct
advice instead.
Commit 5f374fe7a attempted to turn the connect_timeout from an overall
maximum time limit into a per-host limit, but it didn't do a great job of
that. The timer would only get restarted if we actually detected timeout
within connectDBComplete(), not if we changed our attention to a new host
for some other reason. In that case the old timeout continued to run,
possibly causing a premature timeout failure for the new host.
Fix that, and also tweak the logic so that if we do get a timeout,
we advance to the next available IP address, not to the next host name.
There doesn't seem to be a good reason to assume that all the IP
addresses supplied for a given host name will necessarily fail the
same way as the current one. Moreover, this conforms better to the
admittedly-vague documentation statement that the timeout is "per
connection attempt". I changed that to "per host name or IP address"
to be clearer. (Note that reconnections to the same server, such as for
switching protocol version or SSL status, don't get their own separate
timeout; that was true before and remains so.)
Also clarify documentation about the interpretation of connect_timeout
values less than 2.
This seems like a bug, so back-patch to v10 where this logic came in.
Tom Lane, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/5735.1533828184@sss.pgh.pa.us
5262f7a4fc have introduced parallel index scan. In order to estimate the
number of parallel workers, it adds extra argument to amcostestimate() index
access method API function. However, this extra argument was missed in the
documentation. This commit fixes that.
Discussion: https://postgr.es/m/4128fdb4-8b63-2e05-38f6-3125f8c27263%40lab.ntt.co.jp
Author: Tatsuro Yamada, Alexander Korotkov
Backpatch-through: 10
Since commit 3b8f6e75f, failure to do this would lead to
submake-generated-headers not doing anything, so that references to
generated or symlinked headers would fail. Previous to that, the
omission only led to temp-install not doing anything, which apparently
affects many fewer people (doesn't anybody use "make check" in their
build rules??). Hence, backpatch to v11 but not further.
Per complaints from Christoph Berg, Jakob Egger, and others.
A database owner running a database-level REINDEX has the possibility to
also do the operation on shared system catalogs without being an owner
of them, which allows him to block resources it should not have access
to. The same goes for a schema owner. For example, PostgreSQL would go
unresponsive and even block authentication if a lock is waited for
pg_authid. This commit makes sure that a user running a REINDEX SYSTEM,
DATABASE or SCHEMA only works on the following relations:
- The user is a superuser
- The user is the table owner
- The user is the database/schema owner, only if the relation worked on
is not shared.
Robert has worded most the documentation changes, and I have coded the
core part.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier, Robert Haas
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180805211059.GA2185@paquier.xyz
Backpatch-through: 11- as the current behavior has been around for a
very long time and could be disruptive for already released branches.
The amcheck documentation incorrectly claimed that its example query
verifies every catalog index in the database. In fact, the query only
verifies the 10 largest indexes (as determined by pg_class.relpages).
Adjust the description accordingly.
Backpatch: 10-, where contrib/amcheck was introduced.
There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.
This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.
This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.
I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.
Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.
In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.
Discussion: https://www.postgresql.org/message-id/ec787074-2305-c6f4-86aa-6902f98485a4%40iki.fi
Remove description of commit 1944cdc98, which has now been back-patched
so it's not relevant to v11 any longer. Add descriptions of other
recent commits that seemed worth mentioning.
I marked the update as stopping at 2018-07-30, because it's unclear
whether d06eebce5 will be allowed to stay in v11, and I didn't feel like
putting effort into writing a description of it yet. If it does stay,
I think it will deserve mention in the Source Code section.
The example output of pg_replication_slot is wrong. Correct it and make
the output stable by explicitly listing columns to output.
Author: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20180731.190909.42582169.horiguchi.kyotaro@lab.ntt.co.jp
Before v10, we always searched ~/.pgpass using the host parameter,
and nothing else, to match to the "hostname" field of ~/.pgpass.
(However, null host or host matching DEFAULT_PGSOCKET_DIR was replaced by
"localhost".) In v10, this got broken by commit 274bb2b38, repaired by
commit bdac9836d, and broken again by commit 7b02ba62e; in the code
actually shipped, we'd search with hostaddr if both that and host were
specified --- though oddly, *not* if only hostaddr were specified.
Since this is directly contrary to the documentation, and not
backwards-compatible, it's clearly a bug.
However, the change wasn't totally without justification, even though it
wasn't done quite right, because the pre-v10 behavior has arguably been
buggy since we added hostaddr. If hostaddr is specified and host isn't,
the pre-v10 code will search ~/.pgpass for "localhost", and ship that
password off to a server that most likely isn't local at all. That's
unhelpful at best, and could be a security breach at worst.
Therefore, rather than just revert to that old behavior, let's define
the behavior as "search with host if provided, else with hostaddr if
provided, else search for localhost". (As before, a host name matching
DEFAULT_PGSOCKET_DIR is replaced by localhost.) This matches the
behavior of the actual connection code, so that we don't pick up an
inappropriate password; and it allows useful searches to happen when
only hostaddr is given.
While we're messing around here, ensure that empty elements within a
host or hostaddr list select the same behavior as a totally-empty
field would; for instance "host=a,,b" is equivalent to "host=a,/tmp,b"
if DEFAULT_PGSOCKET_DIR is /tmp. Things worked that way in some cases
already, but not consistently so, which contributed to the confusion
about what key ~/.pgpass would get searched with.
Update documentation accordingly, and also clarify some nearby text.
Back-patch to v10 where the host/hostaddr list functionality was
introduced.
Discussion: https://postgr.es/m/30805.1532749137@sss.pgh.pa.us
This allows out-of-tree PLs and similar code to get access to
definitions needed to work with extension data types.
The following existing modules now install headers: contrib/cube,
contrib/hstore, contrib/isn, contrib/ltree, contrib/seg.
Discussion: https://postgr.es/m/87y3euomjh.fsf%40news-spur.riddles.org.uk
Move out of the concurrency control chapter, where mostly only user
table locks are discussed, and move to CREATE COLLATION reference page.
Author: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
As written, this policy constrained only the post-image not the pre-image
of rows, meaning that users could delete other users' rows or take
ownership of such rows, contrary to what the docs claimed would happen.
We need two separate policies to achieve the documented effect.
While at it, try to explain what's happening a bit more fully.
Per report from Олег Самойлов. Back-patch to 9.5 where this was added.
Thanks to Stephen Frost for off-list discussion.
Discussion: https://postgr.es/m/3298321532002010@sas1-2b3c3045b736.qloud-c.yandex.net
This allows querying the SSL implementation used on the server side.
It's analogous to using PQsslAttribute(conn, "library") in libpq.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Commit 5770172cb0 documented secure schema
usage, and that advice suffices for using unqualified names securely.
Document, in typeconv-func primarily, the additional issues that arise
with qualified names. Back-patch to 9.3 (all supported versions).
Reviewed by Jonathan S. Katz.
Discussion: https://postgr.es/m/20180721012446.GA1840594@rfd.leadboat.com
Until now shadowed_variables was the only plpgsql check supported by
plpgsql.extra_warnings and plpgsql.extra_errors. This patch introduces
two new checks - strict_multi_assignment and too_many_rows. Unlike
shadowed_variables, these new checks are enforced at run-time.
strict_multi_assignment checks that commands allowing multi-assignment
(for example SELECT INTO) have the same number of sources and targets.
too_many_rows checks that queries with an INTO clause return one row
exactly.
These checks are aimed at cases that are technically valid and allowed,
but are often a sign of a bug. Therefore those checks are expected to
be enabled primarily in development and testing environments.
Author: Pavel Stehule
Reviewed-by: Stephen Frost, Tomas Vondra
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRA2kKRDKpUNwLY0GeG1OqOp+tLS2yQA1V41gzuSz-hCng@mail.gmail.com
As benchmarks show, using libc's string-to-integer conversion is
pretty slow. At least part of the reason for that is that strtol[l]
have to be more generic than what largely is required inside pg.
This patch considerably speeds up int2/int4 input (int8 already was
already using hand-rolled code).
Most of the existing pg_atoi callers have been converted. But as one
requires pg_atoi's custom delimiter functionality, and as it seems
likely that there's external pg_atoi users, it seems sensible to just
keep pg_atoi around.
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20171208214437.qgn6zdltyq5hmjpk@alap3.anarazel.de
Previously a lot of the error messages referenced the type in the
error message itself. That requires that the message is translated
separately for each type.
Note that currently a few smallint cases continue to reference the
integer, rather than smallint, type. A later patch will create a
separate routine for 16bit input.
Author: Andres Freund
Discussion: https://postgr.es/m/20180707200158.wpqkd7rjr4jxq5g7@alap3.anarazel.de
The initial version of the included-index-column feature stated that
included columns couldn't be the same as any key column of the index.
While it'd be pretty silly to do that, since the included column would be
entirely redundant, we've never prohibited redundant index columns before
so it's not very consistent to do so here. Moreover, the prohibition
was itself badly implemented, so that it failed to reject columns that
were effectively identical but not spelled quite alike, as reported by
Aditya Toshniwal.
(Moreover, it's not hard to imagine that for some non-btree index types,
such cases would be non-silly anyhow: the index might use a lossy
representation for key columns but be able to support retrieval of the
original form of included columns.)
Hence, let's just drop the prohibition.
In passing, do some copy-editing on the documentation for the
included-column feature.
Yugo Nagata; documentation and test corrections by me
Discussion: https://postgr.es/m/CAM9w-_mhBCys4fQNfaiQKTRrVWtoFrZ-wXmDuE9Nj5y-Y7aDKQ@mail.gmail.com
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
It's more logical this way, since the new ordering matches the way the
tables are created; but in any case, the previous location of PARTITION OF
did not appear carefully chosen anyway (since it didn't match the
location in which it appears in the synopsys either, which is what we
normally do.)
In the PARTITION BY stanza, add a link to the partitioning section in
the DDL chapter, too.
Suggested-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwY4Ld7ecxL_KAmaxwt0FUu5VcPPN2L4dh+3BeYbrdBa5g@mail.gmail.com
Update links that resulted in redirects. Most are changes from http to
https, but there are also some other minor edits. (There are still some
redirects where the target URL looks less elegant than the one we
currently have. I have left those as is.)
lca_inner() wasn't prepared for the possibility of getting no inputs.
Fix that, and make some cosmetic improvements to the code while at it.
Also, I thought the documentation of this function as returning the
"longest common prefix" of the paths was entirely misleading; it really
returns a path one shorter than the longest common prefix, for the typical
definition of "prefix". Don't use that term in the docs, and adjust the
examples to clarify what really happens.
This has been broken since its beginning, so back-patch to all supported
branches.
Per report from Hailong Li. Thanks to Pierre Ducroquet for diagnosing
and for the initial patch, though I whacked it around some and added
test cases.
Discussion: https://postgr.es/m/5b0d8e4f-f2a3-1305-d612-e00e35a7be66@qunar.com
Now that the documentation sources are in XML rather than SGML, some of
the documentation about the editor, or more specifically Emacs, setup
needs updating. The updated instructions recommend using nxml-mode,
which works mostly out of the box, with some small tweaks in
emacs.samples and .dir-locals.el.
Also remove some obsolete stuff in .dir-locals.el. I did, however,
leave the sgml-mode settings in there so that someone using Emacs
without emacs.samples gets those settings when editing a *.sgml file.
Starting and aborting transactions in security definer procedures
doesn't work. StartTransaction() insists that the security context
stack is empty, so this would currently cause a crash, and
AbortTransaction() resets it. This could be made to work by
reorganizing the code, but right now we just prohibit it.
Reported-by: amul sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b96Gupt_LFL7uNyy3c50-wbhA68NUjiK5%3DrF6_w%3Dpq_T%3DQ%40mail.gmail.com
Explain that you can use any integer expression for the "count" in
pl/pgsql's versions of FETCH/MOVE, unlike the SQL versions which only
allow a constant.
Remove the duplicate version of this para under MOVE. I don't see
a good reason to maintain two identical paras when we just said that
MOVE works exactly like FETCH.
Per Pavel Stehule, though I didn't use his text.
Discussion: https://postgr.es/m/CAFj8pRAcvSXcNdUGx43bOK1e3NNPbQny7neoTLN42af+8MYWEA@mail.gmail.com
Commit ff4f88916 adjusted the code to enforce the SQL spec's requirement
that a window using GROUPS mode must have an ORDER BY clause. But I missed
that the documentation explicitly said you didn't have to have one.
Also minor wordsmithing in the window-function section of select.sgml.
Per Masahiko Sawada, though I didn't use his patch.
Such replication slots are physical slots freshly created without WAL
being reserved, which is the default behavior, which have not been used
yet as WAL consumption resources to retain WAL. This prevents advancing
a slot to a position older than any WAL available, which could falsify
calculations for WAL segment recycling.
This also cleans up a bit the code, as ReplicationSlotRelease() would be
called on ERROR, and improves error messages.
Reported-by: Kyotaro Horiguchi
Author: Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180626071305.GH31353@paquier.xyz
PostgreSQL nowadays offers some kind of dynamic shared memory feature on
all supported platforms. Having the choice of "none" prevents us from
relying on DSM in core features. So this patch removes the choice of
"none".
Author: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
This is an option consistent with what pg_dump and pg_basebackup provide
which is useful for leveraging the I/O effort when testing things, not
to be used in a production environment.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/20180325122607.GB3707@paquier.xyz
If a view references a foreign table, and the foreign table has a
BEFORE INSERT trigger, then it's possible for a tuple inserted or
updated through the view to be changed such that it violates the
view's WITH CHECK OPTION constraint.
Before this commit, postgres_fdw handled this case inconsistently. A
RETURNING clause on the INSERT or UPDATE statement targeting the view
would cause the finally-inserted tuple to be read back, and the WITH
CHECK OPTION violation would throw an error. But without a RETURNING
clause, postgres_fdw would not read the final tuple back, and WITH
CHECK OPTION would not throw an error for the violation (or may throw
an error when there is no real violation). AFTER ROW triggers on the
foreign table had a similar effect as a RETURNING clause on the INSERT
or UPDATE statement.
To fix, this commit retrieves the attributes needed to enforce the
WITH CHECK OPTION constraint along with the attributes needed for the
RETURNING clause (if any) from the remote side. Thus, the WITH CHECK
OPTION constraint is always evaluated against the final tuple after
any triggers on the remote side.
This fix may be considered inconsistent with CHECK constraints
declared on foreign tables, which are not enforced locally at all
(because the constraint is on a remote object). The discussion
concluded that this difference is reasonable, because the WITH CHECK
OPTION is a constraint on the local view (not any remote object);
therefore it only makes sense to enforce its WITH CHECK OPTION
constraint locally.
Author: Etsuro Fujita
Reviewed-by: Arthur Zakirov, Stephen Frost
Discussion: https://www.postgresql.org/message-id/7eb58fab-fd3b-781b-ac33-f7cfec96021f%40lab.ntt.co.jp
When performing pg_rewind, the presence of a read-only file which is not
accessible for writes will cause a failure while processing. This can
cause the control file of the target data folder to be truncated,
causing it to not be reusable with a successive run.
Also, when pg_rewind fails mid-flight, there is likely no way to be able
to recover the target data folder anyway, in which case a new base
backup is the best option. A note is added in the documentation as
well about.
Reported-by: Christian H.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20180104200633.17004.16377%40wrigleys.postgresql.org
Prefer to use phrases like "child" instead of "partition" when
describing the legacy inheritance-based partitioning. The word
"partition" now has a fixed meaning for the built-in partitioning, so
keeping it out of the documentation of the old method makes things
clearer.
Author: Justin Pryzby <pryzby@telsasoft.com>
This section once started out small but has now grown quite a bit and
needs a bit of structure.
Rewrite as list, add documentation of EXCLUDING, and improve the
documentation of INCLUDING ALL instead of just listing all the options
again.
per report from Yugo Nagata that EXCLUDING was not documented, that part
reviewed by Daniel Gustafsson, most of the rewrite was by me
This has been visibly a forgotten spot in the first implementation of
wait events for I/O added by 249cf07, and what has been missing is a
fsync call for WAL segments which is a wrapper reacting on the value of
GUC wal_sync_method.
Reported-by: Konstantin Knizhnik
Author: Konstantin Knizhnik
Reviewed-by: Craig Ringer, Michael Paquier
Discussion: https://postgr.es/m/4a243897-0ad8-f471-aa40-242591f2476e@postgrespro.ru
When these programs call pg_catalog.set_config, they need to check for
PGRES_TUPLES_OK instead of PGRES_COMMAND_OK. Fix for
5770172cb0.
Reported-by: Ideriha, Takeshi <ideriha.takeshi@jp.fujitsu.com>
search.cpan.org has been EOL'd, with metacpan.org being the official
replacement to which URLs now redirect. Update links to match the new
URL. Also update links to CPAN to use https as it will redirect from
http.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/B74C0219-6BA9-46E1-A524-5B9E8CD3BDB3@yesql.se
The backup history file has been no longer necessary for recovery
since the version 9.0. It's now basically just for informational purpose.
But previously the documentations still described that a recovery
requests the backup history file to proceed. The commit fixes this
documentation bug.
Back-patch to all supported versions.
Author: Yugo Nagata
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180626174752.0ce505e3.nagata@sraoss.co.jp
Upper limits for vacuum_cleanup_index_scale_factor GUC and reloption
were initially set to 100.0 in 857f9c36. However, after further
discussion, it appears that some users like to disable B-tree cleanup
index scan completely (assuming there are no deleted pages).
vacuum_cleanup_index_scale_factor is used barely to protect against
stalled index statistics. And after detailed consideration it appears
that risk of stalled index statistics is low. And it would be nice to
allow advanced users setting higher values of
vacuum_cleanup_index_scale_factor. So, set upper limit for these
GUC and reloption to DBL_MAX.
Author: Alexander Korotkov
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAC8Q8tJCb%3DgxhzcV7T6ctx7PY-Ux1oA-AsTJc6cAVNsQiYcCzA%40mail.gmail.com
vacuum_cleanup_index_scale_factor was located in autovacuum group of
GUCs. However, it affects not only autovacuum, but also manually run
VACUUM. It appears that "client connection defaults" group of GUCs
is more appropriate for vacuum_cleanup_index_scale_factor, because
vacuum_*_age options are already located there.
Also, vacuum_cleanup_index_scale_factor was missed in
postgresql.conf.sample. So, add it there with appropriate comment.
Author: Masahiko Sawada with minor editorization by me
Discussion: https://postgr.es/m/CAD21AoArsoXMLKudXSKN679FRzs6oubEchM53bHwn8Tp%3D2boNg%40mail.gmail.com
Pavel Stehule's original patch had support for default namespace, but I
ripped it out before commit -- hence the docs were correct when written,
and I broke them by omission :-(. Remove the offending phrase.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/1550C5E5-FC70-4493-A226-AA137D831E8D@yesql.se
PostgreSQL 11 introduces compress method for SP-GiST opclasses. That
was mistakenly interpreted as compression support for SP-GiST while
actually that allows lossy representation of leaf keys.
Author: Alexander Korotkov, based on proposal by Darafei Praliaskouski
Discussion: https://postgr.es/m/CAC8Q8tKbYmNdiyWr7hE4GfMY4fbqHKkFziKgrUuWHH6HJQs3og%40mail.gmail.com
Since their introduction, partition trees have been a bit lossy
regarding temporary relations. Inheritance trees respect the following
patterns:
1) a child relation can be temporary if the parent is permanent.
2) a child relation can be temporary if the parent is temporary.
3) a child relation cannot be permanent if the parent is temporary.
4) The use of temporary relations also imply that when both parent and
child need to be from the same sessions.
Partitions share many similar patterns with inheritance, however the
handling of the partition bounds make the situation a bit tricky for
case 1) as the partition code bases a lot of its lookup code upon
PartitionDesc which does not really look after relpersistence. This
causes for example a temporary partition created by session A to be
visible by another session B, preventing this session B to create an
extra partition which overlaps with the temporary one created by A with
a non-intuitive error message. There could be use-cases where mixing
permanent partitioned tables with temporary partitions make sense, but
that would be a new feature. Partitions respect 2), 3) and 4) already.
It is a bit depressing to see those error checks happening in
MergeAttributes() whose purpose is different, but that's left as future
refactoring work.
Back-patch down to 10, which is where partitioning has been introduced,
except that default partitions do not apply there. Documentation also
includes limitations related to the use of temporary tables with
partition trees.
Reported-by: David Rowley
Author: Amit Langote, Michael Paquier
Reviewed-by: Ashutosh Bapat, Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f94Ojk0og9GMkRHGt8wHTW=ijq5KzJKuoBoqWLwSVwGmw@mail.gmail.com
Postgres has traditionally considered the syntactic forms f(x) and x.f
to be equivalent, allowing tricks such as writing a function and then
using it as though it were a computed-on-demand column. However, our
behavior when both interpretations are feasible left something to be
desired: we always chose the column interpretation. This could lead
to very surprising results, as in a recent bug report from Neil Conway.
It also created a dump-and-reload hazard, since what was a function
call in a dumped view could get interpreted as a column reference
at reload, if a matching column name had been added to the underlying
table since the view was created.
What seems better, in ambiguous situations, is to prefer the choice
matching the syntactic form of the reference. This seems much less
astonishing in general, and it fixes the dump/reload hazard.
Although this could be called a bug fix, there have been few complaints
and there's some small risk of breaking applications that depend on the
old behavior, so no back-patch. It does seem reasonable to slip it
into v11, though.
Discussion: https://postgr.es/m/CAOW5sYa3Wp7KozCuzjOdw6PiOYPi6D=VvRybtH2S=2C0SVmRmA@mail.gmail.com
On Windows, it is sometimes important for corresponding malloc() and
free() calls to be made from the same DLL, since some build options can
result in multiple allocators being active at the same time. For that
reason we already provided PQfreemem(). This commit adds a similar
function for freeing string results allocated by the pgtypes library.
Author: Takayuki Tsunakawa
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8AD5D6%40G01JPEXMBYT05
Documentation of word_similarity() and strict_word_similarity() functions
contains some vague wordings which could confuse users. This patch makes
those wordings more clear. word_similarity() was introduced in PostgreSQL 9.6,
and corresponding part of documentation needs to be backpatched.
Author: Bruce Momjian, Alexander Korotkov
Discussion: https://postgr.es/m/20180526165648.GB12510%40momjian.us
Backpatch: 9.6, where word_similarity() was introduced
kern.ipc.shm_use_phys is not a sysctl on OpenBSD, and SEMMAP is not
a kernel configuration option. These were probably copy pasteos from
when the documentation had a single paragraph for *BSD.
Author: Daniel Gustafsson <daniel@yesql.se>
OFFSET <x> ROWS FETCH FIRST <y> ROWS ONLY syntax is supposed to accept
<simple value specification>, which includes parameters as well as
literals. When this syntax was added all those years ago, it was done
inconsistently, with <x> and <y> being different subsets of the
standard syntax.
Rectify that by making <x> and <y> accept the same thing, and allowing
either a (signed) numeric literal or a c_expr there, which allows for
parameters, variables, and parenthesized arbitrary expressions.
Per bug #15200 from Lukas Eder.
Backpatch all the way, since this has been broken from the start.
Discussion: https://postgr.es/m/877enz476l.fsf@news-spur.riddles.org.uk
Discussion: http://postgr.es/m/152647780335.27204.16895288237122418685@wrigleys.postgresql.org
An xref to a <para>'s ID isn't very helpful because paras don't have
names. This causes a warning while building PDFs, though for some
reason not while building HTML. The link arguably went to the wrong
place, too.
To fix, introduce a sub-section we can reference.
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
The description of the index property backward_scan was incorrect and
misleading; rectify.
Backpatch to 9.6 where the amutils functionality was introduced.
Explain partition pruning more thoroughly, in a section above the one
that explains constraint exclusion, since the new feature is the one
that will be used more extensively from now on. Move some of the
material from the constraint exclusion subsection to the one on
partition pruning, so that we can explain the legacy method by
explaining the differences with the new one instead of repeating it.
Author: David Rowley, Álvaro Herrera
Reviewed-by: Amit Langote, David G. Johnston, Justin Pryzby
Discussion: https://postgr.es/m/CAKJS1f8PECxEi1YQ9nhVtshtfOMHUzAMm_Zp4gGCOCnMPjEKJA@mail.gmail.com
I get "WARNING: nested link may be undefined in output: <xref @linkend =
'pgbench'> nested inside parent element link" from this.
Also remove some trailing whitespace.
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
The set of functions that need parallel-safety adjustments isn't the
same in 9.6 as 10, so I shouldn't have blindly back-patched that list.
Adjust as needed. Also, provide examples of the commands to issue.
There shouldn't be a line break between two adjacent tags, because that
will appear as whitespace in the output. (The rendering engine might in
turn collapse that whitespace away, so it might not actually make a
difference, but it's more correct this way.)
Mark Dilger pointed out that the bootstrap parser does not allow
any of its keywords to appear as column values unless they're quoted,
and proposed dealing with that by quoting such values in genbki.pl.
Looking closer, though, we also have that problem with respect to table,
column, and type names appearing in the .bki file: the parser would fail
if any of those matched any of its keywords. While so far there have
been no conflicts (that I've heard of), this seems like a booby trap
waiting to catch somebody. Rather than clutter genbki.pl with enough
quoting logic to handle all that, let's make the bootstrap parser grow
up a little bit and treat its keywords as unreserved.
Experimentation shows that it's fairly easy to do so with the exception
of _null_, which I don't have a big problem with keeping as a reserved
word. The only change needed is that we can't have the "close" command
take an optional table name: it has to either require or forbid the
table name to avoid shift/reduce conflicts. genbki.pl has historically
always included the table name, so I took that option.
The implementation has bootscanner.l passing forward the string value
of each keyword, in case bootparse.y needs that. This avoids needing to
know the precise spelling of each keyword in bootparse.y, which is good
because that's not always obvious from the token name.
Discussion: https://postgr.es/m/3024FC91-DB6D-4732-B31C-DF772DF039A0@gmail.com
Use the same code we already applied in duplicate_oids and unused_oids
to let this script find Catalog.pm without help. This removes the need
to supply a -I switch in most cases.
Also, mark the script executable, again to follow the precedent of
duplicate_oids and unused_oids. Now you can just do
"./reformat_dat_file.pl pg_proc.dat"
if you want to reformat only one or a few .dat files rather than all.
It'd be possible to remove the -I switches in the Makefile's convenience
targets, but I chose to leave them: they don't hurt anything, and it's
possible that in weird VPATH situations they might be of value.
Identify pg_replication_origin as a shared catalog in catalogs.sgml,
using the same boilerplate wording used for most other shared catalogs
(and tweak another place where someone had randomly deviated from
that boilerplate).
Make an example in mmgr/README more consistent with surrounding text.
Update an obsolete cross-reference in a comment in storage/block.h.
Zhuo Ql
Discussion: https://postgr.es/m/44296255.1819230.1524889719001@mail.yahoo.com
In the wake of commit 5602265f7, we were doing duplicate-OID detection
quite inefficiently, by invoking duplicate_oids which does all the same
parsing of catalog headers and .dat files as genbki.pl does. That adds
under half a second on modern machines, but quite a bit more on slow
buildfarm critters, so it seems worth avoiding. Let's just extend
genbki.pl a little so it can also detect duplicate OIDs, and remove
the duplicate_oids call from the build process.
(This also means that duplicate OID detection will happen during
Windows builds, which AFAICS it didn't before.)
This makes the use-case for duplicate_oids a bit dubious, but it's
possible that people will still want to run that check without doing
a whole build run, so let's keep that script.
In passing, move down genbki.pl's creation of its temp output files
so that it doesn't happen until after we've done parsing and validation
of the input. This avoids leaving a lot of clutter around after a
failure.
John Naylor and Tom Lane
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
When bt_index_parent_check() is called with the heapallindexed option,
allocate a second Bloom filter to fingerprint block numbers that appear
in the downlinks of internal pages. Use Bloom filter probes when
walking the B-Tree to detect missing downlinks. This can detect subtle
problems with page deletion/VACUUM, such as corruption caused by the bug
just fixed in commit 6db4b499.
The downlink Bloom filter is bound in size by work_mem. Its optimal
size is typically far smaller than that of the regular heapallindexed
Bloom filter, especially when the index has high fan-out.
Author: Peter Geoghegan
Reviewer: Teodor Sigaev
Discussion: https://postgr.es/m/CAH2-WznUzY4fWTjm1tBB3JpVz8cCfz7k_qVp5BhuPyhivmWJFg@mail.gmail.com
This controls both plan-time and execution-time new-style partition
pruning. While finer-grain control is possible (maybe using an enum GUC
instead of boolean), there doesn't seem to be much need for that.
This new parameter controls partition pruning for all queries:
trivially, SELECT queries that affect partitioned tables are naturally
under its control since they are using the new technology. However,
while UPDATE/DELETE queries do not use the new code, we make the new GUC
control their behavior also (stealing control from
constraint_exclusion), because it is more natural, and it leads to a
more natural transition to the future in which those queries will also
use the new pruning code.
Constraint exclusion still controls pruning for regular inheritance
situations (those not involving partitioned tables).
Author: David Rowley
Review: Amit Langote, Ashutosh Bapat, Justin Pryzby, David G. Johnston
Discussion: https://postgr.es/m/CAKJS1f_0HwsxJG9m+nzU+CizxSdGtfe6iF_ykPYBiYft302DCw@mail.gmail.com
Previously, you could partition by a boolean column as long as you
spelled the bound values as string literals, for instance FOR VALUES
IN ('t'). The trouble with this is that ruleutils.c printed that as
FOR VALUES IN (TRUE), which is reasonable syntax but wasn't accepted by
the grammar. That results in dump-and-reload failures for such cases.
Apply a minimal fix that just causes TRUE and FALSE to be converted to
strings 'true' and 'false'. This is pretty grotty, but it's too late for
a more principled fix in v11 (to say nothing of v10). We should revisit
the whole issue of how partition bound values are parsed for v12.
Amit Langote
Discussion: https://postgr.es/m/e05c5162-1103-7e37-d1ab-6de3e0afaf70@lab.ntt.co.jp
Change things around so that proper quoting of values interpolated into
the BKI data by initdb is the responsibility of initdb, not something
we half-heartedly handle by putting double quotes into the raw BKI data.
(Note: experimentation shows that it still doesn't work to put a double
quote into the initial superuser username, but that's the fault of
inadequate quoting while interpolating the name into SQL scripts;
the BKI aspect of it works fine now.)
Having done that, we can remove the special-case handling of values
that look like "something" from genbki.pl, and instead teach it to
escape double --- and single --- quotes properly. This removes the
nowhere-documented need to treat those specially in the BKI source
data; whatever you write will be passed through unchanged into the
inserted data value, modulo Perl's rules about single-quoted strings.
Add documentation explaining the (pre-existing) handling of backslashes
in the BKI data.
Per an earlier discussion with John Naylor.
Discussion: https://postgr.es/m/CAJVSVGUNao=-Q2-vAN3PYcdF5tnL5JAHwGwzZGuYHtq+Mk_9ng@mail.gmail.com
They were accidentally excluded when reverting the backend online
checksum functionality, and since they weren't built the incorrect
reference to a removed section also did not trigger a problem.
Author: Christoph Berg
Make it clear that a cluster has to be shut down cleanly before
pg_verify_checksum can be run against it.
Author: Michael Paquier
Review: Daniel Gustafsson
This option makes no sense when the cluster checksum state cannot be
changed, and should have been removed in the revert.
Author: Daniel Gustafsson
Review: Michael Paquier
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
In particular, the requirement to have SELECT privilege for the initial
table copy was previously not documented.
Author: Shinoda, Noriyoshi <noriyoshi.shinoda@hpe.com>
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Discussion: https://postgr.es/m/E1f5FAB-0006LU-MB@gemulon.postgresql.org
In its original form, reformat_dat_file.pl smashed consecutive blank
lines to a single blank line, which was helpful for mopping up excess
whitespace during the bootstrap data format conversion. But going
forward, there seems little reason to do that; if developers want to
put in multiple blank lines, let 'em. This makes it conform to the
documentation I (tgl) wrote, too.
In passing, clean up some sloppy markup choices in bki.sgml.
John Naylor
Discussion: https://postgr.es/m/28827.1523039259@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
This rectifies an oversight in commit 8224de4f4, by adding a new
property 'can_include' for pg_indexam_has_property, and adjusting the
results of pg_index_column_has_property to give more appropriate
results for INCLUDEd columns.
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net