Rename/repurpose pg_proc.protransform as "prosupport". The idea is
still that it names an internal function that provides knowledge to
the planner about the behavior of the function it's attached to;
but redesign the API specification so that it's not limited to doing
just one thing, but can support an extensible set of requests.
The original purpose of simplifying a function call is handled by
the first request type to be invented, SupportRequestSimplify.
Adjust all the existing transform functions to handle this API,
and rename them fron "xxx_transform" to "xxx_support" to reflect
the potential generalization of what they do. (Since we never
previously provided any way for extensions to add transform functions,
this change doesn't create an API break for them.)
Also add DDL and pg_dump support for attaching a support function to a
user-defined function. Unfortunately, DDL access has to be restricted
to superusers, at least for now; but seeing that support functions
will pretty much have to be written in C, that limitation is just
theoretical. (This support is untested in this patch, but a follow-on
patch will add cases that exercise it.)
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
In place of three separate but interrelated lists (indexclauses,
indexquals, and indexqualcols), an IndexPath now has one list
"indexclauses" of IndexClause nodes. This holds basically the same
information as before, but in a more useful format: in particular, there
is now a clear connection between an indexclause (an original restriction
clause from WHERE or JOIN/ON) and the indexquals (directly usable index
conditions) derived from it.
We also change the ground rules a bit by mandating that clause commutation,
if needed, be done up-front so that what is stored in the indexquals list
is always directly usable as an index condition. This gets rid of repeated
re-determination of which side of the clause is the indexkey during costing
and plan generation, as well as repeated lookups of the commutator
operator. To minimize the added up-front cost, the typical case of
commuting a plain OpExpr is handled by a new special-purpose function
commute_restrictinfo(). For RowCompareExprs, generating the new clause
properly commuted to begin with is not really any more complex than before,
it's just different --- and we can save doing that work twice, as the
pretty-klugy original implementation did.
Tracking the connection between original and derived clauses lets us
also track explicitly whether the derived clauses are an exact or lossy
translation of the original. This provides a cheap solution to getting
rid of unnecessary rechecks of boolean index clauses, which previously
seemed like it'd be more expensive than it was worth.
Another pleasant (IMO) side-effect is that EXPLAIN now always shows
index clauses with the indexkey on the left; this seems less confusing.
This commit leaves expand_indexqual_conditions() and some related
functions in a slightly messy state. I didn't bother to change them
any more than minimally necessary to work with the new data structure,
because all that code is going to be refactored out of existence in
a follow-on patch.
Discussion: https://postgr.es/m/22182.1549124950@sss.pgh.pa.us
The previous ordering of these steps satisfied the nominal requirement
that set_rel_pathlist_hook could editorialize on the whole set of Paths
constructed for a base relation. In practice, though, trying to change
the set of partial paths was impossible. Adding one didn't work because
(a) it was too late to be included in Gather paths made by the core code,
and (b) calling add_partial_path after generate_gather_paths is unsafe,
because it might try to delete a path it thinks is dominated, but that
is already embedded in some Gather path(s). Nor could the hook safely
remove partial paths, for the same reason that they might already be
embedded in Gathers.
Better to call extensions first, let them add partial paths as desired,
and then gather. In v11 and up, we already doubled down on that ordering
by postponing gathering even further for single-relation queries; so even
if the hook wished to editorialize on Gather path construction, it could
not.
Report and patch by KaiGai Kohei. Back-patch to 9.6 where Gather paths
were added.
Discussion: https://postgr.es/m/CAOP8fzahwpKJRTVVTqo2AE=mDTz_efVzV6Get_0=U3SO+-ha1A@mail.gmail.com
The comment marker "#" is copied to the output, so it's only
appropriate for comments that make sense in the shell output. For
comments about the Autoconf language, "dnl" should be used.
This has the advantage that the comparator expression, the table's
slot, etc do not have to be rebuilt. Additionally the simplehash.h
hashtable within the tuple hashtable now keeps its previous size and
doesn't need to be reallocated. That both reduces allocator overhead,
and improves performance in cases where the input estimation was off
by a significant factor.
To avoid an API/ABI break, the new parameter is exposed via the new
BuildTupleHashTableExt(), and BuildTupleHashTable() now is a wrapper
around the former, that continues to allocate the table itself in the
tablecxt.
Using this fixes performance issues discovered in the two bugs
referenced. This commit however has not converted the callers, that's
done in a separate commit.
Bug: #15592#15486
Reported-By: Jakub Janeček, Dmitry Marakasov
Author: Andres Freund
Discussion:
https://postgr.es/m/15486-05850f065da42931@postgresql.orghttps://postgr.es/m/20190114180423.ywhdg2iagzvh43we@alap3.anarazel.de
Backpatch: 11, this is a prerequisite for other fixes
In bf6c614a2f I added a expr context to evaluate the grouping
expression. Unfortunately the code I added initialized them while in
the calling context, rather the table context. Additionally, I used
CreateExprContext() rather than CreateStandaloneExprContext(), which
creates the econtext in the estate's query context.
Fix that by using CreateStandaloneExprContext when in the table's
tablecxt. As we rely on the memory being freed by a memory context
reset that means that the econtext's shutdown callbacks aren't being
called, but that seems ok as the expressions are tightly controlled
due to ExecBuildGroupingEqual().
Bug: #15592
Reported-By: Dmitry Marakasov
Author: Andres Freund
Discussion: https://postgr.es/m/20190114222838.h6r3fuyxjxkykf6t@alap3.anarazel.de
Backpatch: 11, where I broke this in bf6c614a2f
While this isn't really supposed to happen, it can occur in OOM
situations and perhaps others. Instead of crashing, substitute
"(no message provided)".
I didn't worry about localizing this text, since we aren't
localizing anything else here; besides, if we're on the edge of
OOM, it's unlikely gettext() would work.
Report and fix by Sergio Conde Gómez in bug #15624.
Discussion: https://postgr.es/m/15624-4dea54091a2864e6@postgresql.org
In case of a reload, we just want to LOG errors instead of FATAL when
processing SSL configuration, but the more recent code for the
ssl_*_protocol_version settings didn't behave like that.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
This is useful when looking at partition trees with multiple layers, and
combined with pg_partition_tree, it provides the possibility to show up
an entire tree by just knowing one member at any level.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Amit Langote
Discussion: https://postgr.es/m/20181207014015.GP2407@paquier.xyz
Up to now postgres_fdw has been using create_foreignscan_path() to
generate not only base-relation paths, but also paths for foreign joins
and foreign upperrels. This is wrong, because create_foreignscan_path()
calls get_baserel_parampathinfo() which will only do the right thing for
baserels. It accidentally fails to fail for unparameterized paths, which
are the only ones postgres_fdw (thought it) was handling, but we really
need different APIs for the baserel and join cases.
In HEAD, the best thing to do seems to be to split up the baserel,
joinrel, and upperrel cases into three functions so that they can
have different APIs. I haven't actually given create_foreign_join_path
a different API in this commit: we should spend a bit of time thinking
about just what we want to do there, since perhaps FDWs would want to
do something different from the build-up-a-join-pairwise approach that
get_joinrel_parampathinfo expects. In the meantime, since postgres_fdw
isn't prepared to generate parameterized joins anyway, just give it a
defense against trying to plan joins with lateral refs.
In addition (and this is what triggered this whole mess) fix bug #15613
from Srinivasan S A, by teaching file_fdw and postgres_fdw that plain
baserel foreign paths still have outer refs if the relation has
lateral_relids. Add some assertions in relnode.c to catch future
occurrences of the same error --- in particular, to catch other FDWs
doing that, but also as backstop against core-code mistakes like the
one fixed by commit bdd9a99aa.
Bug #15613 also needs to be fixed in the back branches, but the
appropriate fix will look quite a bit different there, since we don't
want to assume that existing FDWs get the word right away.
Discussion: https://postgr.es/m/15613-092be1be9576c728@postgresql.org
The modules RewindTest.pm and ServerSetup.pm are really only useful for
TAP tests, so they really belong in the TAP test directories. In
addition, ServerSetup.pm is renamed to SSLServer.pm.
The test scripts have their own directories added to the search path so
that the relocated modules will be found, regardless of where the tests
are run from, even on modern perl where "." is no longer in the
searchpath.
Discussion: https://postgr.es/m/e4b0f366-269c-73c3-9c90-d9cb0f4db1f9@2ndQuadrant.com
Backpatch as appropriate to 9.5
In commit f16241bef7, we have changed the behavior for concurrent updates
that move row to a different partition, but forgot to update the docs.
Previously when an UPDATE command causes a row to move from one partition
to another, there is a chance that another concurrent UPDATE or DELETE
misses this row. However, now we raise a serialization failure error in
such a case.
Reported-by: David Rowley
Author: David Rowley and Amit Kapila
Backpatch-through: 11 where it was introduced
Discussion: https://postgr.es/m/CAKJS1f-iVhGD4-givQWpSROaYvO3c730W8yoRMTF9Gc3craY3w@mail.gmail.com
This enforces one-or-more character matches in the regular expressions
for pg_dump testing on SQL syntax output where zero-or-more matches
implies a syntax error.
Author: Daniel Gustafsson
Reviewed-by: David G. Johnston, Michael Paquier
Discussion: https://postgr.es/m/B313C32C-0E24-4AFB-95FF-6DA0C4E18A89@yesql.se
The relation creation is done at executor startup, however the main
regression test suite is lacking scenarios where no data is inserted
which is something that can happen when using EXECUTE or EXPLAIN with
CREATE TABLE AS and WITH NO DATA.
Some patches are worked on to reshape the way CTAS relations are
created, so this makes sure that we do not miss some query patterns
already supported.
Reported-by: Andreas Karlsson
Author: Michael Paquier
Reviewed-by: Andreas Karlsson
Discussion: https://postgr.es/m/20190206091817.GB14980@paquier.xyz
The previous tacit assumption that index_form_tuple() hides differences
in the TOAST state of its input datums was wrong. Normalize input
varlena datums by decompressing compressed values, and forming a new
index tuple for fingerprinting using uncompressed inputs. The final
normalized representation may actually be compressed once again within
index_form_tuple(), though that shouldn't matter. When the original
tuple is found to have no datums that are compressed inline, fingerprint
the original tuple directly.
Normalization avoids false positive reports of corruption in certain
cases. For example, the executor can apply toasting with some inline
compression to an entire heap tuple because its input has a single
external TOAST pointer. Varlena datums for other attributes that are
not particularly good candidates for inline compression can be
compressed in the heap tuple in passing, without the representation of
the same values in index tuples ever receiving concomitant inline
compression.
Add a test case to recreate the issue in a simpler though less realistic
way: by exploiting differences in pg_attribute.attstorage between heap
and index relations.
This bug was discovered by me during testing of an upcoming set of nbtree
enhancements. It was also independently reported by Andreas Kunert, as
bug #15597. His test case was rather more realistic than the one I
ended up using.
Bug: #15597
Discussion: https://postgr.es/m/CAH2-WznrVd9ie+TTJ45nDT+v2nUt6YJwQrT9SebCdQKtAvfPZw@mail.gmail.com
Discussion: https://postgr.es/m/15597-294e5d3e7f01c407@postgresql.org
Backpatch: 11-, where heapallindexed verification was introduced.
create_lateral_join_info() computes a bunch of information about lateral
references between base relations, and then attempts to propagate those
markings to appendrel children of the original base relations. But the
original coding neglected the possibility of indirect descendants
(grandchildren etc). During v11 development we noticed that this was
wrong for partitioned-table cases, but failed to realize that it was just
as wrong for any appendrel. While the case can't arise for appendrels
derived from traditional table inheritance (because we make a flat
appendrel for that), nested appendrels can arise from nested UNION ALL
subqueries. Failure to mark the lower-level relations as having lateral
references leads to confusion in add_paths_to_append_rel about whether
unparameterized paths can be built. It's not very clear whether that
leads to any user-visible misbehavior; the lack of field reports suggests
that it may cause nothing worse than minor cost misestimation. Still,
it's a bug, and it leads to failures of Asserts that I intend to add
later.
To fix, we need to propagate information from all appendrel parents,
not just those that are RELOPT_BASERELs. We can still do it in one
pass, if we rely on the append_rel_list to be ordered with ancestor
relationships before descendant ones; add assertions checking that.
While fixing this, we can make a small performance improvement by
traversing the append_rel_list just once instead of separately for
each appendrel parent relation.
Noted while investigating bug #15613, though this patch does not fix
that (which is why I'm not committing the related Asserts yet).
Discussion: https://postgr.es/m/3951.1549403812@sss.pgh.pa.us
Commit f83419b739 failed to notice that mkvcbuild.pl and build.pl use
different searchpath and do-file logic, breaking the latter, so it is
adjusted to use the same logic as mkvcbuild.pl.
Previously heap_getattr() returned NULL for attributes with a fast
default value (c.f. 16828d5c02), as it had no handling whatsoever
for that case.
A previous fix, 7636e5c60f, attempted to fix issues caused by this
oversight, but just expanding OLD tuples for triggers doesn't actually
solve the underlying issue.
One known consequence of this bug is that the check for HOT updates
can return the wrong result, when a previously fast-default'ed column
is set to NULL. Which in turn means that an index over a column with
fast default'ed columns might be corrupt if the underlying column(s)
allow NULLs.
Fix by handling fast default columns in heap_getattr(), remove now
superfluous expansion in GetTupleForTrigger().
Author: Andres Freund
Discussion: https://postgr.es/m/20190201162404.onngi77f26baem4g@alap3.anarazel.de
Backpatch: 11, where fast defaults were introduced
Some tests have been using regular expressions which have been lax in
escaping dots, which may cause tests to pass when they should not. This
make the whole set of tests more robust where needed.
Author: David Rowley
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f9jD8aVo1BTH+Vgwd=f-ynbuRVrS90XbWMT6UigaOQJTA@mail.gmail.com
Contrary to the comment on 772d4b76, only paths starting with "./" or
"../" are considered relative to the current working directory by perl's
"do" function. So this patch converts all the relevant cases to use "./"
paths. This only affects MSVC.
Backpatch to all live branches.
DST law changes in Kazakhstan, Metlakatla, and São Tomé and Príncipe.
Kazakhstan's Qyzylorda zone is split in two, creating a new zone
Asia/Qostanay, as some areas did not change UTC offset.
Historical corrections for Hong Kong and numerous Pacific islands.
This was fixed for MSVC tools by commit 1df92eeafe, but per
buildfarm member bowerbird genbki.pl needs the same treatment.
Backpatch to all live branches.
Some of our older buildfarm members bleat about this coding,
along the lines of
prepjointree.c:112: warning: 'get_result_relid' declared inline after being called
prepjointree.c:112: warning: previous declaration of 'get_result_relid' was here
Modern compilers will probably inline this function without being
prompted, so rather than move the function, let's just drop the
marking.
Historically we've had each release branch include all prior branches'
notes, including minor-release changes, back to the beginning of the
project. That's basically an O(N^2) proposition, and it was starting to
catch up with us: as of HEAD the back-branch release notes alone accounted
for nearly 30% of the documentation. While there's certainly some value
in easy access to back-branch notes, this is getting out of hand.
Hence, switch over to the rule that each branch contains only its own
release notes. So as to not make older notes too hard to find, each
branch will provide URLs for the immediately preceding branches'
release notes on the project website.
There might be value in providing aggregated notes across all branches
somewhere on the website, but that's a task for another day.
Discussion: https://postgr.es/m/cbd4aeb5-2d9c-8b84-e968-9e09393d4c83@postgresql.org
Commit 62215de29 turns out to have been not quite on-the-mark.
When we are forced to postpone dumping of a materialized view into
the dump's post-data section (because it depends on a unique index
that isn't created till that section), we may also have to postpone
dumping other matviews that depend on said matview. The previous fix
didn't reliably work for such cases: it'd break the dependency loops
properly, producing a workable object ordering, but it didn't
necessarily mark all the matviews as "postponed_def". This led to
harmless bleating about "archive items not in correct section order",
as reported by Tom Cassidy in bug #15602. Less harmlessly,
selective-restore options such as --section might misbehave due to
the matview dump objects not being properly labeled.
The right way to fix it is to consider that each pre-data dependency
we break amounts to moving the no-longer-dependent object into
post-data, and hence we should mark that object if it's a matview.
Back-patch to all supported versions, since the issue's been there
since matviews were introduced.
Discussion: https://postgr.es/m/15602-e895445f73dc450b@postgresql.org
Rather than define ld_library_path_ver with a big nested $(if), just
put the overriding values in the makefiles for the relevant ports.
Also add a variable for port makefiles to append their own stuff to
with_temp_install, and use it to set LD_LIBRARY_PATH_RPATH=1 on
FreeBSD which is needed to make LD_LIBRARY_PATH override DT_RPATH
if DT_RUNPATH is not set (which seems to depend in unpredictable ways
on the choice of compiler, at least on my system).
Backpatch for the benefit of anyone doing regression tests on FreeBSD.
(For other platforms there should be no functional change.)
In b0eaa4c51b, we allow FSM to be created only after 4 pages. One of the
tests check the FSM contents and to do that it populates many tuples in
the relation. The FSM contents depend on the availability of freespace in
the page and it could vary because of the alignment of tuples.
This commit removes the dependency on FSM contents.
Author: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KADF6K1bagr0--mGv3dMcZ%3DH_Z-Qtvdfbp5PjaC6PJJA%40mail.gmail.com
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
Previously we initialized pages when bulk extending in
RelationAddExtraBlocks(). That has a major disadvantage: It ties
RelationAddExtraBlocks() to heap, as other types of storage are likely
to need different amounts of special space, have different amount of
free space (previously determined by PageGetHeapFreeSpace()).
That we're relying on initializing pages, but not WAL logging the
initialization, also means the risk for getting
"WARNING: relation \"%s\" page %u is uninitialized --- fixing"
style warnings in vacuums after crashes/immediate shutdowns, is
considerably higher. The warning sounds much more serious than what
they are.
Fix those two issues together by not initializing pages in
RelationAddExtraPages() (but continue to do so in
RelationGetBufferForTuple(), which is linked much more closely to
heap), and accepting uninitialized pages as normal in
vacuumlazy.c. When vacuumlazy encounters an empty page it now adds it
to the FSM, but does nothing else. We chose to not issue a debug
message, much less a warning in that case - it seems rarely useful,
and quite likely to scare people unnecessarily.
For now empty pages aren't added to the VM, because standbys would not
re-discover such pages after a promotion. In contrast to other sources
for empty pages, there's no corresponding WAL records triggering FSM
updates during replay.
Previously when extending the relation, there was a moment between
extending the relation, and acquiring an exclusive lock on the new
page, in which another backend could lock the page. To avoid new
content being put on that new page, vacuumlazy needed to acquire the
extension lock for a brief moment when encountering a new page. A
second corner case, only working somewhat by accident, was that
RelationGetBufferForTuple() sometimes checks the last page in a
relation for free space, without consulting the FSM; that only worked
because PageGetHeapFreeSpace() interprets the zero page header in a
new page as no free space. The lack of handling this properly
required reverting the previous attempt in 684200543b.
This issue can be solved by using RBM_ZERO_AND_LOCK when extending the
relation, thereby avoiding this window. There's some added complexity
when RelationGetBufferForTuple() is called with another buffer (for
updates), to avoid deadlocks, but that's rarely hit at runtime.
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20181219083945.6khtgm36mivonhva@alap3.anarazel.de
Add PG_CFLAGS, PG_CXXFLAGS, and PG_LDFLAGS variables to pgxs.mk which
will be appended or prepended to the corresponding make variables.
Notably, there was previously no way to pass custom CXXFLAGS to third
party extension module builds, COPT and PROFILE supporting only CFLAGS
and LDFLAGS.
Backpatch all the way down to ease integration with existing
extensions.
Author: Christoph Berg
Reviewed-by: Andres Freund, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20181113104005.GA32154@msg.credativ.de
Backpatch-through: 9.4
To avoid deadlock, backend acquires a lock on heap pages in block
number order. In certain cases, lock on heap pages is dropped and
reacquired. In this case, the locks are dropped for reading in
corresponding VM page/s. The issue is we re-acquire locks in bufferId
order whereas the intention was to acquire in blockid order.
This commit ensures that we will always acquire locks on heap pages in
blockid order.
Reported-by: Nishant Fnu
Author: Nishant Fnu
Reviewed-by: Amit Kapila and Robert Haas
Backpatch-through: 9.4
Discussion: https://postgr.es/m/5883C831-2ED1-47C8-BFAC-2D5BAE5A8CAE@amazon.com
The documentation includes sections to be able to initialize and start
Postgres via a couple of commands. Some of its recommendations involve
using directly "postgres", which is inconsistent with the recommendation
given by initdb. At the same time make some other command calls more
consistent with the rest, by using an absolute path when creating a
database.
Author: Andreas Scherbaum
Reviewed-by: Michael Banck, Ryan Lambert
An upcoming patch which changes how inheritance planning works requires
adding a new function that does a similar job to set_append_rel_size() but
for child target relations. To save it from having to duplicate the qual
building code, move that to a separate function first.
Here we also change things so that we never attempt to build security quals
after detecting some const false child quals. We needlessly used to do this
just before we marked the child relation as a dummy rel.
In passing, this also moves the partition pruned check to before the qual
building code. We don't need to build the child quals before we check if
the partition has been pruned.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_i+jrrD+if8qC7KPuTAAWsd=dtepgY_7u=P86GDEwm7A@mail.gmail.com
A timeout of 5s is used when waiting for WAL to become available at
recovery so as the startup process is able to react promptly if a
trigger file shows up. However this missed the fact that the startup
process also relies on the timeout to check periodically the status of
any active WAL receiver.
Discussion: https://postgr.es/m/20190131070956.GE13429@paquier.xyz