Fix one untranslatable string concatenation in pg_rewind.
Fix one message in pg_verify_checksums to use a style use elsewhere
and avoid plural issues.
Fix one gratuitous abbreviation in psql.
On many modern platforms, /etc/localtime is a symlink to a file within the
IANA database. Reading the symlink lets us find out the name of the system
timezone directly, without going through the brute-force search embodied in
scan_available_timezones(). This shortens the runtime of initdb by some
tens of ms, which is helpful for the buildfarm, and it also allows us to
reliably select the same zone name the system was actually configured for,
rather than possibly choosing one of IANA's many zone aliases. (For
example, in a system configured for "Asia/Tokyo", the brute-force search
would not choose that name but its alias "Japan", on the grounds of the
latter string being shorter. More surprisingly, "Navajo" is preferred
to either "America/Denver" or "US/Mountain", as seen in an old complaint
from Josh Berkus.)
If /etc/localtime doesn't exist, or isn't a symlink, or we can't make
sense of its contents, or the contents match a zone we know but that
zone doesn't match the observed behavior of localtime(), fall back to
the brute-force search.
Also, tweak initdb so that it prints the zone name it selected.
In passing, replace the last few references to the "Olson" database in
code comments with "IANA", as that's been our preferred term since
commit b2cbced9e.
Patch by me, per a suggestion from Robert Haas; review by Michael Paquier
Discussion: https://postgr.es/m/7408.1525812528@sss.pgh.pa.us
* Include partitioned tables in what's offered after ANALYZE.
* Include toast_tuple_target in what's offered after ALTER TABLE ... SET|RESET.
* Include HASH in what's offered after PARTITION BY.
This is extracted from a larger patch; these bits seem like
uncontroversial bug fixes for v11 features, so back-patch them into v11.
Justin Pryzby
Discussion: https://postgr.es/m/20180529000623.GA21896@telsasoft.com
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
Currently there are two ways to trigger log rotation in logging collector
process: call pg_rotate_logfile() SQL-function or send SIGUSR1 signal directly
to logging collector process. However, it's nice to have more suitable way
for external tools to do that, which wouldn't require SQL connection or
knowledge of logging collector pid. This commit implements triggering log
rotation by "pg_ctl logrotate" command.
Discussion: https://postgr.es/m/20180416.115435.28153375.horiguchi.kyotaro%40lab.ntt.co.jp
Author: Kyotaro Horiguchi, Alexander Kuzmenkov, Alexander Korotkov
A cast declared WITH INOUT was described as '(binary coercible)',
which seems pretty inaccurate; let's print '(with inout)' instead.
Per complaint from Jean-Pierre Pelletier.
This definitely seems like a bug fix, but given that it's been wrong
since 8.4 and nobody complained before, I'm hesitant to back-patch a
behavior change into stable branches. It doesn't seem too late for
v11 though.
Discussion: https://postgr.es/m/5b887023.1c69fb81.ff96e.6a1d@mx.google.com
Use postgres_fe.h, since this is frontend code. Pretend that we've heard
of project style guidelines for, eg, #include order. Use BlockNumber not
int arithmetic for block numbers, to avoid misbehavior with relations
exceeding 2^31 blocks. Avoid an unnecessary strict-aliasing warning
(per report from Michael Banck). Const-ify assorted stuff. Avoid
scribbling on the output of readdir() -- perhaps that's safe in practice,
but POSIX forbids it, and this code has so far earned exactly zero
credibility portability-wise. Editorialize on an ambiguously-worded
message.
I did not touch the problem of the "buf" local variable being possibly
insufficiently aligned; that's not specific to this code, and seems like
it should be fixed as part of a different, larger patch.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
To verify the checksums, we open the file in text mode which doesn't work
on Windows as WIN32 treats Control-Z as EOF in files opened in text mode.
This leads to "short read of block .." error in some cases.
Fix it by opening the files in the binary mode.
Author: Amit Kapila
Reviewed-by: Magnus Hagander
Backpatch-through: 11
Discussion: https://postgr.es/m/CAA4eK1+LOnzod+h85FGmyjWzXKy-XV1FYwEyP-Tky2WpD5cxwA@mail.gmail.com
Instead of repeating the almost same large query in each version branch,
use one query and add a few columns to the SELECT list depending on the
version. This saves a lot of duplication.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Using -d is odd, because we normally reserve that for a database
argument, so rename it to -v and add long version --verbose.
Also, reduce it to emit one line per file checked rather than one line
per block.
Per a complaint from Michael Banck.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Michael Banck <michael.banck@credativ.de>
Discussion: https://postgr.es/m/20180827113411.GA22768@nighthawk.caipicrew.dd-dns.de
This function had a blacklist of dump object types that it believed
needed exclusive lock ... but we hadn't maintained that, so that it
was missing ROW SECURITY, POLICY, and INDEX ATTACH items, all of
which need (or should be treated as needing) exclusive lock.
Since the same oversight seems likely in future, let's reverse the
sense of the test so that the code has a whitelist of safe object
types; better to wrongly assume a command can't be run in parallel
than the opposite. Currently the only POST_DATA object type that's
safe is CREATE INDEX ... and that list hasn't changed in a long time.
Back-patch to 9.5 where RLS came in.
Discussion: https://postgr.es/m/11450.1535483506@sss.pgh.pa.us
Ensure the TOC entry is marked with the correct schema, so that its
name is as unique as the index's is.
Fix the dependencies: we want dependencies from this TOC entry to the
two indexes it depends on, and we don't care (at least not for this
purpose) what order the indexes are created in. Also, add dependencies
on the indexes' underlying tables. Those might seem pointless given
the index dependencies, but they are helpful to cue parallel restore
to avoid running the ATTACH PARTITION in parallel with other DDL on
the same tables.
Discussion: https://postgr.es/m/10817.1535494963@sss.pgh.pa.us
The source code was already set up for NLS support, so just a nls.mk
file needed to be added. Also, fix the old problem of putting the int64
format specifier right into the string, which breaks NLS.
The archive should show a dependency on the item's table, but it failed
to include one. This could cause failures in parallel restore due to
emitting ALTER TABLE ... ENABLE ROW LEVEL SECURITY before restoring
the table's data. In practice the odds of a problem seem low, since
you would typically need to have set FORCE ROW LEVEL SECURITY as well,
and you'd also need a very high --jobs count to have any chance of this
happening. That probably explains the lack of field reports.
Still, it's a bug, so back-patch to 9.5 where RLS was introduced.
Discussion: https://postgr.es/m/19784.1535390902@sss.pgh.pa.us
Since procedures are now a different thing from functions, change the
CREATE OPERATOR syntax to use FUNCTION in the clause that specifies the
function. PROCEDURE is still accepted for compatibility.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
Historically, the term procedure was used as a synonym for function in
Postgres/PostgreSQL. Now we have procedures as separate objects from
functions, so we need to clean up the documentation to not mix those
terms.
In particular, mentions of "trigger procedures" are changed to "trigger
functions", and access method "support procedures" are changed to
"support functions". (The latter already used FUNCTION in the SQL
syntax anyway.) Also, the terminology in the SPI chapter has been
cleaned up.
A few tests, examples, and code comments are also adjusted to be
consistent with documentation changes, but not everything.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
This commit prevents a crash of pg_dump caused by the exclusion of a
table which has identity columns, as the table would be correctly
excluded but not its identity sequence. In order to fix that, identity
sequences are excluded if the parent table is defined as such. Knowing
about such sequences has no meaning without their parent table anyway.
Reported-by: Andy Abelisto
Author: David Rowley
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/153479393218.1316.8472285660264976457@wrigleys.postgresql.org
Backpatch-through: 10
While monitoring the code, a couple of issues related to string
translation has showed up:
- Some routines for auto-updatable views return an error string, which
sometimes missed the shot. A comment regarding string translation is
added for each routine to help with future features.
- GSSAPI authentication missed two translations.
- vacuumdb handles non-translated strings.
- GetConfigOptionByNum should translate strings. This part is not
back-patched as after a minor upgrade this could be surprising for
users.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20180810.152131.31921918.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch-through: 9.3
Previously, this code blindly followed the common coding pattern of
passing PQserverVersion(AH->connection) as the server-version parameter
of fmtQualifiedId. That works as long as we have a connection; but in
pg_restore with text output, we don't. Instead we got a zero from
PQserverVersion, which fmtQualifiedId interpreted as "server is too old to
have schemas", and so the name went unqualified. That still accidentally
managed to work in many cases, which is probably why this ancient bug went
undetected for so long. It only became obvious in the wake of the changes
to force dump/restore to execute with restricted search_path.
In HEAD/v11, let's deal with this by ripping out fmtQualifiedId's server-
version behavioral dependency, and just making it schema-qualify all the
time. We no longer support pg_dump from servers old enough to need the
ability to omit schema name, let alone restoring to them. (Also, the few
callers outside pg_dump already didn't work with pre-schema servers.)
In older branches, that's not an acceptable solution, so instead just
tweak the DISABLE/ENABLE TRIGGER logic to ensure it will schema-qualify
its output regardless of server version.
Per bug #15338 from Oleg somebody. Back-patch to all supported branches.
Discussion: https://postgr.es/m/153452458706.1316.5328079417086507743@wrigleys.postgresql.org
Commit 244142d32a only tested for the
pg_controldata output for primary servers, but standby servers have
different "Database cluster state" output, so check for that too.
Diagnosed-by: Michael Paquier
Discussion: https://postgr.es/m/20180810164240.GM13638@paquier.xyz
Backpatch-through: 9.3
Commit bcbd94080 didn't bother to fix up a comment it had falsified.
Also, const-ify choose_dsm_implementation(), since what it's returning
is always a constant string; pickier compilers would warn about this.
pg_dump with --binary-upgrade must emit ALTER EXTENSION ADD commands
for all objects that are members of extensions. It forgot to do so for
event triggers, as per bug #15310 from Nick Barnes. Back-patch to 9.3
where event triggers were introduced.
Haribabu Kommi
Discussion: https://postgr.es/m/153360083872.1395.4593932457718151600@wrigleys.postgresql.org
The original coding here (which is, I believe, my fault) supposed that
it didn't need to concern itself with the possibility that one object
of a given type-priority has a namespace while another doesn't. But
that's not reliably true anymore, if it ever was; and if it does happen
then it's possible that DOTypeNameCompare returns self-inconsistent
comparison results. That leads to unspecified behavior in qsort()
and a resultant weird output order from pg_dump.
This should end up being only a cosmetic problem, because any ordering
constraints that actually matter should be enforced by the later
dependency-based sort. Still, it's a bug, so back-patch.
Report and fix by Jacob Champion, though I editorialized on his
patch to the extent of making NULL sort after non-NULL, for consistency
with our usual sorting definitions.
Discussion: https://postgr.es/m/CABAq_6Hw+V-Kj7PNfD5tgOaWT_-qaYkc+SRmJkPLeUjYXLdxwQ@mail.gmail.com
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
\conninfo prints the results of PQhost() and some other libpq functions.
It used to override the PQhost() result with the hostaddr parameter if
that'd been given, but that's unhelpful when multiple hosts were listed
in the connection string. Furthermore, it seems unnecessary in the wake
of commit 1944cdc98, since PQhost does any useful substitution itself.
So let's just remove the extra code and print PQhost()'s result without
any editorialization.
Back-patch to v10, as 1944cdc98 (just) was.
Discussion: https://postgr.es/m/23287.1533227021@sss.pgh.pa.us
Commits 742869946 et al turn out to be a couple bricks shy of a load.
We were dumping the stored values of GUC_LIST_QUOTE variables as they
appear in proconfig or setconfig catalog columns. However, although that
quoting rule looks a lot like SQL-identifier double quotes, there are two
critical differences: empty strings ("") are legal, and depending on which
variable you're considering, values longer than NAMEDATALEN might be valid
too. So the current technique fails altogether on empty-string list
entries (as reported by Steven Winfield in bug #15248) and it also risks
truncating file pathnames during dump/reload of GUC values that are lists
of pathnames.
To fix, split the stored value without any downcasing or truncation,
and then emit each element as a SQL string literal.
This is a tad annoying, because we now have three copies of the
comma-separated-string splitting logic in varlena.c as well as a fourth
one in dumputils.c. (Not to mention the randomly-different-from-those
splitting logic in libpq...) I looked at unifying these, but it would
be rather a mess unless we're willing to tweak the API definitions of
SplitIdentifierString, SplitDirectoriesString, or both. That might be
worth doing in future; but it seems pretty unsafe for a back-patched
bug fix, so for now accept the duplication.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/7585.1529435872@sss.pgh.pa.us
pg_dump knew about printing ALTER TABLE ... REPLICA IDENTITY USING INDEX
for indexes declared as indexes, but it failed to print that for indexes
declared as unique or primary-key constraints. Per report from Achilleas
Mantzios.
This has been broken since the feature was introduced, AFAICS.
Back-patch to 9.4.
Discussion: https://postgr.es/m/1e6cc5ad-b84a-7c07-8c08-a4d0c3cdc938@matrix.gatewaynet.com
This is useful to know when the data copy has been finished. The
current situation can be confusing for users as the last message is
"waiting for background process to finish streaming", so it looks like
this is taking time but the final sync is instead.
Author: Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1ypeoMJ=tFBG8vP13sxEtXd4Pm_x1SqsJdW_RvzpcvN=A@mail.gmail.com
Previously pg_upgrade checked for the pid file and started/stopped the
server to force a clean shutdown. However, "pg_ctl -m immediate"
removes the pid file but doesn't do a clean shutdown, so check
pg_controldata for a clean shutdown too.
Diagnosed-by: Vimalraj A
Discussion: https://postgr.es/m/CAFKBAK5e4Q-oTUuPPJ56EU_d2Rzodq6GWKS3ncAk3xo7hAsOZg@mail.gmail.com
Backpatch-through: 9.3
Previously only the missing library name was reported, forcing users to
look in all databases to find the library entries.
Discussion: https://postgr.es/m/20180713162815.GA3835@momjian.us
Author: Daniel Gustafsson, me
Depending on the platform used, this can cause a crash in the worst
case, or an unhelpful error message, so fail gracefully.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1807262302550.29874@lancre
Backpatch: 11-, where hash() has been added in pgbench.
Some error messages which report something about a file operation use
as well context which is already provided within the path being worked
on, making things rather duplicated. This creates more work for
translators, and does not actually bring clarity.
More could be done, however in a lot of cases the context used is
actually useful, still that patch gets down things with a good cut.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/20180718044711.GA8565@paquier.xyz
I blew the dust off a Bourne shell (file date 1996, yea verily) and
tried to run test.sh with it. It mostly worked, but I found that the
temp-directory creation code introduced by commit be76a6d39 was not
compatible, for a couple of reasons: this shell thinks "set -e" should
force an exit if a command within backticks fails, and it also thinks code
within braces should be executed by a sub-shell, meaning that variable
settings don't propagate back up to the parent shell. In view of Victor
Wagner's report that Solaris is still using pre-POSIX shells, seems like
we oughta make this case work. It's not like the code is any less
idiomatic this way; the prior coding technique appeared nowhere else.
(There is a remaining bash-ism here, which is that $RANDOM doesn't do
what the code hopes in non-bash shells. But the use of $$ elsewhere in
that path should be enough to ensure uniqueness and some amount of
randomness, so I think it's okay as-is.)
Back-patch to all supported branches, as the previous commit was.
Discussion: https://postgr.es/m/20180720153820.69e9ae6c@fafnir.local.vm
Double-quote $PGDATA in "find" commands introduced by commit da9b580d8,
in case that path contains spaces or other special characters.
Adjust a few other places so that quoting is done more consistently.
None of the others are actual bugs AFAICS, but it's confusing to readers
if the same thing is done differently in different places.
Noted by Tels.
Discussion: https://postgr.es/m/c96303c04c360bbedaa04f90f515745b.squirrel@sm.webmail.pair.com
Most of test.sh uses traditional backtick syntax for command substitution,
but commit da9b580d8 introduced two uses of $(...) syntax, which is not
recognized by very old shells. Bring those into line with the rest.
Victor Wagner
Discussion: https://postgr.es/m/20180720153820.69e9ae6c@fafnir.local.vm
This is essential information when looking at an index that has
"included" columns. Per discussion, follow the style used in \dC
and some other places: column header is "Key?" and values are "yes"
or "no" (all translatable).
While at it, revise describeOneTableDetails to be a bit more maintainable:
avoid hard-wired column numbers and multiple repetitions of what needs
to be identical test logic. This also results in the emitted catalog
query corresponding more closely to what we print, which should be a
benefit to users of ECHO_HIDDEN mode, and perhaps a bit faster too
(the old logic sometimes asked for values it would not print, even
ones that are fairly expensive to get).
Discussion: https://postgr.es/m/21724.1531943735@sss.pgh.pa.us
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
Some error messages related to file handling are using the code path
context to define their state. For example, 2PC-related errors are
referring to "two-phase status files", or "relation mapping file" is
used for catalog-to-filenode mapping, however those prove to be
difficult to translate, and are not more helpful than just referring to
the path of the file being worked on. So simplify all those error
messages by just referring to files with their path used. In some
cases, like the manipulation of WAL segments, the context is actually
helpful so those are kept.
Calls to the system function read() have also been rather inconsistent
with their error handling sometimes not reporting the number of bytes
read, and some other code paths trying to use an errno which has not
been set. The in-core functions are using a more consistent pattern
with this patch, which checks for both errno if set or if an
inconsistent read is happening.
So as to care about pluralization when reading an unexpected number of
byte(s), "could not read: read %d of %zu" is used as error message, with
%d field being the output result of read() and %zu the expected size.
This simplifies the work of translators with less variations of the same
message.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180520000522.GB1603@paquier.xyz
Update links that resulted in redirects. Most are changes from http to
https, but there are also some other minor edits. (There are still some
redirects where the target URL looks less elegant than the one we
currently have. I have left those as is.)
The patch that ended up as commit 3de241dba8 ("Foreign keys on
partitioned tables") lacked pg_dump tests, so the pg_dump code that was
there to support it inadvertently stopped working when in later
development I modified the backend code not to emit pg_trigger rows for
the partitioned table itself.
Bug analysis and code fix is by Michaël. I (Álvaro) added the test.
Reported-by: amul sul <sulamul@gmail.com>
Co-authored-by: Michaël Paquier <michael@paquier.xyz>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAAJ_b94n=UsNVhgs97vCaWEZAMe-tGDRVuZ73oePQH=eaJKGSA@mail.gmail.com
PostgreSQL nowadays offers some kind of dynamic shared memory feature on
all supported platforms. Having the choice of "none" prevents us from
relying on DSM in core features. So this patch removes the choice of
"none".
Author: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
This is an option consistent with what pg_dump and pg_basebackup provide
which is useful for leveraging the I/O effort when testing things, not
to be used in a production environment.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/20180325122607.GB3707@paquier.xyz
The previous sync logic relied on looking for and then launching
externally initdb -S, which is a simple wrapper on top of fsync_pgdata.
There is nothing preventing pg_rewind to directly call this routine, so
remove the dependency to initdb and just call it directly.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/20180325122607.GB3707@paquier.xyz
In TAP test functions, that is, those that produce test results, locally
increment $Test::Builder::Level. This has the effect that test failures
are reported at the callers location rather than somewhere in the test
support libraries.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
In a partition, row triggers that had been cloned from their parent
partitioned table would not be listed at all in psql's \d, which could
surprise users, per insistent complaint from Ashutosh Bapat (though his
aim was elsewhere). The simplest possible fix, suggested by Peter
Eisentraut, seems to be to list triggers marked as internal if they have
a row in pg_depend that points to some other trigger.
Author: Álvaro Herrera
Discussion: https://postgr.es/m/20180618165910.p26vhk7dpq65ix54@alvherre.pgsql
This file has been missing the fact that it needs to report back to
callers a proper failure on fsync calls. I have spotted the one in
tar_finish() while Kuntal has spotted the one in tar_close().
Backpatch down to 10 where this code has been introduced.
Reported by: Michael Paquier, Kuntal Ghosh
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh, Magnus Hagander
Discussion: https://postgr.es/m/20180625024356.GD1146@paquier.xyz
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
Commit 16828d5c02 neglected to do this, so upgraded databases would
silently get null instead of the specified default in rows without the
attribute defined.
A new binary upgrade function is provided to perform this and pg_dump is
adjusted to output a call to the function if required in binary upgrade
mode.
Also included is code to drop missing attribute values for dropped
columns. That way if the type is later dropped the missing value won't
have a dangling reference to the type.
Finally the regression tests are adjusted to ensure that there is a row
with a missing value so that this code is exercised in upgrade testing.
Catalog version unfortunately bumped.
Regression test changes from Tom Lane.
Remainder from me, reviewed by Tom Lane, Andres Freund, Alvaro Herrera
Discussion: https://postgr.es/m/19987.1529420110@sss.pgh.pa.us
This could only cause an issue if strftime returned a ridiculously
long timezone name, which seems unlikely; and it wouldn't qualify
as a security problem even then, since pg_waldump (nee pg_xlogdump)
is a debug tool not part of the server. But gcc 8 has started issuing
warnings about it, so let's use snprintf and be safe.
Backpatch to 9.3 where this code was added.
Discussion: https://postgr.es/m/21789.1529170195@sss.pgh.pa.us
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
Commit c37b3d08c dropped its added GetDataDirectoryCreatePerm call into
the wrong place in pg_resetwal.c, namely after the chdir to DataDir.
That broke invocations using a relative path, as reported by Tushar Ahuja.
We could have left it where it was and changed the argument to be ".",
but that'd result in a rather confusing error message in event of a
failure, so re-ordering seems like a better solution.
Similarly reorder operations in pg_rewind.c. The issue there is that
it doesn't seem like a good idea to do any actual operations before the
not-root check (on Unix) or the restricted token acquisition (on Windows).
I don't know that this is an actual bug, but I'm definitely not convinced
that it isn't, either.
Assorted other code review for c37b3d08c and da9b580d8: fix some
misspelled or otherwise badly worded comments, put the #include for
<sys/stat.h> where it actually belongs, etc.
Discussion: https://postgr.es/m/aeb9c3a7-3c3f-a57f-1a18-c8d4fcdc2a1f@enterprisedb.com
While glibc's version of printf accepts %m, most others do not;
to be portable, we have to do it the hard way with strerror(errno).
pg_verify_checksums evidently did not get that memo.
Noted while fooling around with NetBSD-current, which generates
a compiler warning for this mistake.
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Discussion: https://postgr.es/m/a2f2b87c-56be-c070-bfc0-36288b4b41c1@2ndQuadrant.com
The regexes used in 102_vacuumdb_stages.pl to check the postmaster log
for expected output contained several places with ".*.*", which is
underdetermined and can cause exponential runtime growth in Perl's regex
matcher (since it's not bright enough not to waste time seeing whether
different splits of the same substring would allow a match). We were
fortunate that the amount of text in the postmaster log was generally not
enough to make the runtime go to the moon; although commit 6271fceb8 had
been on the hairy edge of an obvious problem, thanks to its increasing the
default log verbosity to DEBUG1. Experimentation shows that anyone who
tried to run this test case with an even higher log verbosity would have
been in for serious pain. But even at default logging level, fixing this
saves several hundred ms on my workstation, more on slower buildfarm
members.
Remove the extra ".*"s, restoring more-or-less-linear matching speed.
Back-patch to 9.4 where the test case was added, mostly in case anyone
tries to do related debugging in a back branch.
Discussion: https://postgr.es/m/32459.1525657786@sss.pgh.pa.us
While poking into initdb's performance, I noticed that this query
wasn't being done very intelligently. By forcing it to execute
obj_description() for each pg_proc/pg_operator join row, we were
essentially setting up a nestloop join to pg_description, which
is not a bright query plan when there are hundreds of outer rows.
Convert the check for a "deprecated" operator into a NOT EXISTS
so that it can be done as a hashed antijoin. On my workstation
this reduces the time for this query from ~ 35ms to ~ 10ms.
Which is not a huge win, but it adds up over buildfarm runs.
In passing, insert forced query breaks (\n\n, in single-user mode)
after each SQL-query file that initdb sources, and after some
relatively new queries in setup_privileges(). This doesn't make
a lot of difference normally, but it will result in briefer, saner
error messages if anything goes wrong.
Msys2's uname -s outputs a string beginning MSYS rather than MINGW as is
output by Msys. Allow either in pg_upgrade's test.sh.
Backpatch to all live branches.
For querying pg_database about information about the database being
dumped, look up by using current_database() instead of the value
obtained from PQdb(). When using a connection proxy, the value from
PQdb() might not be the real name of the database.
Unify indnkeys/indnatts/indnkeyatts usage for all version of query to get
index information, remove indnkeys column from query as unused.
Author: Marina Polyakova
Noticed by: Peter Eisentraut
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
The predecessor test boiled down to "PQserverVersion(NULL) >= 100000",
which is always false. No release includes that, so it could not have
reintroduced CVE-2018-1058. Back-patch to 9.4, like the addition of the
predecessor in commit 8d2814f274.
Discussion: https://postgr.es/m/20180422215551.GB2676194@rfd.leadboat.com
Change things around so that proper quoting of values interpolated into
the BKI data by initdb is the responsibility of initdb, not something
we half-heartedly handle by putting double quotes into the raw BKI data.
(Note: experimentation shows that it still doesn't work to put a double
quote into the initial superuser username, but that's the fault of
inadequate quoting while interpolating the name into SQL scripts;
the BKI aspect of it works fine now.)
Having done that, we can remove the special-case handling of values
that look like "something" from genbki.pl, and instead teach it to
escape double --- and single --- quotes properly. This removes the
nowhere-documented need to treat those specially in the BKI source
data; whatever you write will be passed through unchanged into the
inserted data value, modulo Perl's rules about single-quoted strings.
Add documentation explaining the (pre-existing) handling of backslashes
in the BKI data.
Per an earlier discussion with John Naylor.
Discussion: https://postgr.es/m/CAJVSVGUNao=-Q2-vAN3PYcdF5tnL5JAHwGwzZGuYHtq+Mk_9ng@mail.gmail.com
Teach both base backups and pg_verify_checksums that if a page is new,
it does not have a checksum yet, so it shouldn't be verified.
Noted by Tomas Vondra, review by David Steele.
This option makes no sense when the cluster checksum state cannot be
changed, and should have been removed in the revert.
Author: Daniel Gustafsson
Review: Michael Paquier
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
Previously a warning was printed, but the tool actually kept running
even when running as root. This is something we definitely want to
prevent, but since this means a behavior change, not backpatching.
Author: Michael Paquier
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
These tests accummulated almost a gigabyte of data during the test which
was then removed at the end. Instead, remove output that's no longer
needed between the individual tests, to keep the total disk usage down
lower.
Author: Michael Banck
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
This reworks how the tests to run are defined. Instead of having to
define all runs for all tests, we define those tests which should pass
(generally using one of the defined broad hashes), add in any which
should be specific for this test, and exclude any specific runs that
shouldn't pass for this test. This ends up removing some 4k+ lines
(more than half the file) but, more importantly, greatly simplifies the
way runs-to-be-tested are defined.
As discussed in the updated comments, for example, take the test which
does CREATE TABLE test_table. That CREATE TABLE should show up in all
'full' runs of pg_dump, except those cases where 'test_table' is
excluded, of course, and that's exactly how the test gets defined now
(modulo a few other related cases, like where we dump only that table,
or we dump the schema it's in, or we exclude the schema it's in):
like => {
%full_runs,
%dump_test_schema_runs,
only_dump_test_table => 1,
section_pre_data => 1, },
unlike => {
exclude_dump_test_schema => 1,
exclude_test_table => 1, }, },
Next, we no longer expect every run to be listed for every test. If a
run is listed in 'like' (directly or through a hash) then it's a 'like',
unless it's listed in 'unlike' in which case it's an 'unlike'. If it
isn't listed in either, then it's considered an 'unlike' automatically.
Lastly, this changes the code to no longer use like/unlike but rather to
use 'ok()' with 'diag()' which allows much more control over what gets
spit out to the screen. Gone are the days of the entire dump being sent
to the console, now you'll just get a couple of lines for each failing
test which say the test that failed and the run that it failed on.
This covers both the pg_dump TAP tests in src/bin/pg_dump and those in
src/test/modules/test_pg_dump.
Hopefully fix the fact that these checks are unstable, by introducing
the corruption in a separate table from pg_class, and also explicitly
disable autovacuum on those tables. Also make sure PostgreSQL is
stopped while the corruption is introduced to avoid possible caching
effects.
Author: Michael Banck
We were being careless in some places about the order of -L switches in
link command lines, such that -L switches referring to external directories
could come before those referring to directories within the build tree.
This made it possible to accidentally link a system-supplied library, for
example /usr/lib/libpq.so, in place of the one built in the build tree.
Hilarity ensued, the more so the older the system-supplied library is.
To fix, break LDFLAGS into two parts, a sub-variable LDFLAGS_INTERNAL
and the main LDFLAGS variable, both of which are "recursively expanded"
so that they can be incrementally adjusted by different makefiles.
Establish a policy that -L switches for directories in the build tree
must always be added to LDFLAGS_INTERNAL, while -L switches for external
directories must always be added to LDFLAGS. This is sufficient to
ensure a safe search order. For simplicity, we typically also put -l
switches for the respective libraries into those same variables.
(Traditional make usage would have us put -l switches into LIBS, but
cleaning that up is a project for another day, as there's no clear
need for it.)
This turns out to also require separating SHLIB_LINK into two variables,
SHLIB_LINK and SHLIB_LINK_INTERNAL, with a similar rule about which
switches go into which variable. And likewise for PG_LIBS.
Although this change might appear to affect external users of pgxs.mk,
I think it doesn't; they shouldn't have any need to touch the _INTERNAL
variables.
In passing, tweak src/common/Makefile so that the value of CPPFLAGS
recorded in pg_config lacks "-DFRONTEND" and the recorded value of
LDFLAGS lacks "-L../../../src/common". Both of those things are
mistakes, apparently introduced during prior code rearrangements,
as old versions of pg_config don't print them. In general we don't
want anything that's specific to the src/common subdirectory to
appear in those outputs.
This is certainly a bug fix, but in view of the lack of field
complaints, I'm unsure whether it's worth the risk of back-patching.
In any case it seems wise to see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/25214.1522604295@sss.pgh.pa.us
When base backups are run over the replication protocol (for example
using pg_basebackup), verify the checksums of all data blocks if
checksums are enabled. If checksum failures are encountered, log them
as warnings but don't abort the backup.
This becomes the default behaviour in pg_basebackup (provided checksums
are enabled on the server), so add a switch (-k) to disable the checks
if necessary.
Author: Michael Banck
Reviewed-By: Magnus Hagander, David Steele
Discussion: https://postgr.es/m/20180228180856.GE13784@nighthawk.caipicrew.dd-dns.de
Avoid storing the result of PQsocket() in a pgsocket variable; it's
declared as int, and the no-socket test is properly written as "x < 0"
not "x == PGINVALID_SOCKET". This accidentally had no bad effect
because we never got to init_slot() with a bad connection, but it's
still wrong.
Actually, it seems like we should avoid storing the result for a long
period at all. The function's not so expensive that it's worth avoiding,
and the existing coding technique here would fail if anyone tried to
PQreset the connection during the life of the program. Hence, just
re-call PQsocket every time we construct a select(2) mask.
Speaking of select(), GetIdleSlot imagined that it could compute the
select mask once and continue to use it over multiple calls to
select_loop(), which is pretty bogus since that would stomp on the
mask on return. This could only matter if the function's outer loop
iterated more than once, which is unlikely (it'd take some connection
receiving data, but not enough to complete its command). But if it
did happen, we'd acquire "tunnel vision" and stop watching the other
connections for query termination, with the effect of losing parallelism.
Another way in which GetIdleSlot could lose parallelism is that once
PQisBusy returns false, it would lock in on that connection and do
PQgetResult until that returns NULL; in some cases that could result
in blocking. (Perhaps this can never happen in vacuumdb due to the
limited set of commands that it can issue, but I'm not quite sure
of that, and even if true today it's not a future-proof assumption.)
Refactor the code to do that properly, so that it risks blocking in
PQgetResult only in cases where we need to wait anyway.
Another loss-of-parallelism problem, which *is* easily demonstrable,
is that any setup queries issued during prepare_vacuum_command() were
always issued on the last-to-be-created connection, whether or not
that was idle. Long-running operations on that connection thus
prevented issuance of additional operations on the other ones, except
in the limited cases where no preparatory query was needed. Instead,
wait till we've identified a free connection and use that one.
Also, avoid core dump due to undersized malloc request in the case
that no tables are identified to be vacuumed.
The bogus no-socket test was noted by CharSyam, the other problems
identified in my own code review. Back-patch to 9.5 where parallel
vacuumdb was introduced.
Discussion: https://postgr.es/m/CAMrLSE6etb33-192DTEUGkV-TsvEcxtBDxGWG1tgNOMnQHwgDA@mail.gmail.com
Compilation failed for lack of an #ifdef on builds without
pg_strong_random(). Also fix relevant error messages to meet
project style guidelines.
Fabien Coelho, further adjusted by me
Discussion: https://postgr.es/m/32390.1522464534@sss.pgh.pa.us
The target cluster that was rewound needs to perform recovery from
the checkpoint created at failover, which leads it to remove or recreate
some files and directories that may have been copied from the source
cluster. So pg_rewind can skip synchronizing such files and directories,
and which reduces the amount of data transferred during a rewind
without changing the usefulness of the operation.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova, Stephen Frost and me
Discussion: https://postgr.es/m/20180205071022.GA17337@paquier.xyz
After processing the filemap to build the list of chunks that will be
fetched from the source to rewing the target server, it is possible that
a file which was previously processed is removed from the source. A
simple example of such an occurence is a WAL segment which gets recycled
on the target in-between. When the filemap is processed, files not
categorized as relation files are first truncated to prepare for its
full copy of which is going to be taken from the source, divided into a
set of junks. However, for a recycled WAL segment, this would result in
a segment which has a zero-byte size. With such an empty file,
post-rewind recovery thinks that records are saved but they are actually
not because of the truncation which happened when processing the
filemap, resulting in data loss.
In order to fix the problem, make sure that files which are found as
removed on the source when receiving chunks of them are as well deleted
on the target server for consistency.
Back-patch to 9.5 where pg_rewind was added.
Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier
Reported-by: Tsunakawa Takayuki
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8DAAA2%40G01JPEXMBYT05
If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.
Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.
Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.
Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup
Setting random could increase reproducibility of test in some cases. Patch
suggests three providers for seed: time (default), strong random
generator (if available) and unsigned constant. Seed could be set from
command line or enviroment variable.
Author: Fabien Coelho
Reviewed by: Chapman Flack
Discussion: https://www.postgresql.org/message-id/flat/20160407082711.q7iq3ykffqxcszkv@alap3.anarazel.de
This adds a new option --wal-segsize (analogous to initdb) that changes
the WAL segment size in pg_control.
Author: Nathan Bossart <bossartn@amazon.com>
We were running out of good single-letter options for some upcoming
pg_resetwal functionality, so add long options to create more
possibilities. Add to pg_controldata as well for symmetry.
based on patch by Bossart, Nathan <bossartn@amazon.com>
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
If the control file is corrupted and specifies the WAL segment size
to be 0 bytes, calculating the latest checkpoint's REDO WAL file
will fail with a division-by-zero error. Show it as "???" instead.
Also reword the warning message a bit and send it to stdout, like the
other pre-existing warning messages.
Add some tests for dealing with a corrupted pg_control file.
Author: Nathan Bossart <bossartn@amazon.com>, tests by me
In e170b8c8, protection against modified search_path was added. However,
PostgreSQL versions prior to 10 does not accept SQL commands over a
replication connection, so the protection would generate a syntax error.
Since we cannot run SQL commands on it, we are also not vulnerable to
the issue that e170b8c8 fixes, so we can just skip this command for
older versions.
Author: Michael Paquier <michael@paquier.xyz>
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Historically, tab completion for functions has offered the names of
aggregates as well. This is essential in at least one context, namely
GRANT/REVOKE, because there is no GRANT ON AGGREGATE syntax. There
are other cases where a command that nominally is for functions will
allow aggregates as well, though not all do.
Commit fd1a421fe changed this query to disallow aggregates, but that
doesn't seem to have been thought through very carefully. Change it
to allow aggregates (but still ignore procedures).
We might at some point tighten this up, but it'd require sorting through
all the uses of this query to see which ones should offer aggregate
names and which shouldn't. Given the lack of field complaints about
the historical laxity here, that's work I'm not eager to do right now.
Discussion: https://postgr.es/m/14268.1520283126@sss.pgh.pa.us
The server won't actually start with that setting anymore, not since
we raised the default max_wal_senders to 10. Per discussion, we don't
wish to back down on that default, so instead raise the effective floor
for max_connections (to 20). It's still possible to configure a smaller
setting manually, but initdb won't set it that way.
Since that change happened in v10, back-patch to v10.
Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180209.170823.42008365.horiguchi.kyotaro@lab.ntt.co.jp
Up to now we've not worried about whether psql's tab completion queries
would work against prior server versions. But since we support older
server versions in describe.c, we really ought to do so here as well.
Failing to take care of this not only leads to loss of tab-completion
service when using an older server, but risks aborting a user's open
transaction when we send an incompatible query to the server.
The recent changes in pg_proc.prokind are one reason to take this more
seriously now than before, and the proposed patch for completion after
SELECT needs some such capability as well.
Hence, create some infrastructure to allow selection of one of several
versions of a query depending on server version. For cases where we
just need to select one of several query strings, introduce VersionedQuery
and COMPLETE_WITH_VERSIONED_QUERY(). Likewise extend the SchemaQuery
infrastructure to allow versioning of those.
I went ahead and fixed the prokind issues, to serve as an illustration
of how to use versioned SchemaQuery. To have some illustration of
VersionedQuery, change the support for completion of publication and
subscription names so that psql will not send sure-to-fail queries to
pre-v10 servers. There is much more that should be done to make tab
completion more friendly to older servers, but this commit is mainly
meant to get the infrastructure in place, so I stopped here.
Discussion: https://postgr.es/m/24314.1520190408@sss.pgh.pa.us
pg_rewind checks whether each file is a relation data file, from its path.
Previously this check logic had the bug which made pg_rewind fail to
recognize any relation data files in tablespaces. Which also caused
an assertion failure in pg_rewind.
Back-patch to 9.5 where pg_rewind was added.
Author: Takayuki Tsunakawa
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8D6C7A@G01JPEXMBYT05
Previously, it'd try to create log files under the source directory
not the build directory. This fell over if the source isn't writable
by the building user.
Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.20.1801101038340.2283@lancre
The new column distinguishes normal functions, procedures, aggregates,
and window functions. This replaces the existing columns proisagg and
proiswindow, and replaces the convention that procedures are indicated
by prorettype == 0. Also change prorettype to be VOIDOID for procedures.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
This makes the client programs behave as documented regardless of the
connect-time search_path and regardless of user-created objects. Today,
a malicious user with CREATE permission on a search_path schema can take
control of certain of these clients' queries and invoke arbitrary SQL
functions under the client identity, often a superuser. This is
exploitable in the default configuration, where all users have CREATE
privilege on schema "public".
This changes behavior of user-defined code stored in the database, like
pg_index.indexprs and pg_extension_config_dump(). If they reach code
bearing unqualified names, "does not exist" or "no schema has been
selected to create in" errors might appear. Users may fix such errors
by schema-qualifying affected names. After upgrading, consider watching
server logs for these errors.
The --table arguments of src/bin/scripts clients have been lax; for
example, "vacuumdb -Zt pg_am\;CHECKPOINT" performed a checkpoint. That
now fails, but for now, "vacuumdb -Zt 'pg_am(amname);CHECKPOINT'" still
performs a checkpoint.
Back-patch to 9.3 (all supported versions).
Reviewed by Tom Lane, though this fix strategy was not his first choice.
Reported by Arseniy Sharoglazov.
Security: CVE-2018-1058
Historically, pg_dump has "set search_path = foo, pg_catalog" when
dumping an object in schema "foo", and has also caused that setting
to be used while restoring the object. This is problematic because
functions and operators in schema "foo" could capture references meant
to refer to pg_catalog entries, both in the queries issued by pg_dump
and those issued during the subsequent restore run. That could
result in dump/restore misbehavior, or in privilege escalation if a
nefarious user installs trojan-horse functions or operators.
This patch changes pg_dump so that it does not change the search_path
dynamically. The emitted restore script sets the search_path to what
was used at dump time, and then leaves it alone thereafter. Created
objects are placed in the correct schema, regardless of the active
search_path, by dint of schema-qualifying their names in the CREATE
commands, as well as in subsequent ALTER and ALTER-like commands.
Since this change requires a change in the behavior of pg_restore
when processing an archive file made according to this new convention,
bump the archive file version number; old versions of pg_restore will
therefore refuse to process files made with new versions of pg_dump.
Security: CVE-2018-1058
Commit b3f840120 changed pg_upgrade so that it'd actually drop and
re-create the template1 and postgres databases in the new cluster.
That works fine, serially. With the -j option it's not so fine, because
other per-database jobs might be launched while the template1 database is
dropped. Since they attempt to connect there to start up, kaboom.
This is the cause of the intermittent failures buildfarm member jacana
has been showing for the last month; evidently it is the only BF member
configured to run the pg_upgrade test with parallelism enabled.
Fix by processing template1 separately before we get into the parallel
sub-job launch loop. (We could alternatively have made the postgres DB
be the special case, but it seems likely that template1 will contain
less stuff and so we lose less parallelism with this choice.)
This oversight led to data corruption in matviews, manifesting as
"could not access status of transaction" before our most recent releases,
and "found xmin from before relfrozenxid" errors since then.
The proximate cause of the problem seems to have been confusion between
the task of preserving dropped-column status and the task of preserving
frozenxid status. Those are required for distinct sets of relkinds,
and the reasoning was entirely undocumented in the source code. In hopes
of forestalling future errors of the same kind, try to improve the
commentary in this area.
In passing, also improve the remarkably unhelpful comments around
pg_upgrade's set_frozenxids(). That's not actually buggy AFAICS,
but good luck figuring out what it does from the old comments.
Per report from Claudio Freire. It appears that bug #14852 from Alexey
Ermakov is an earlier report of the same issue, and there may be other
cases that we failed to identify at the time.
Patch by me based on analysis by Andres Freund. The bug dates back
to the introduction of matviews, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGTBQpbrY9CdRGGhyBZ9yqY4jWaGC85rUF4X+R7d-aim=mBNsw@mail.gmail.com
Discussion: https://postgr.es/m/20171013115320.28049.86457@wrigleys.postgresql.org
The previous coding here applied atoi() to strings that could represent
values too large to fit in an int. If the overflowed value happened to
match one of the cases it was looking for, it would drop that limit
value from the output, leading to incorrect restoration of the sequence.
Avoid the unsafe behavior, and also make the logic cleaner by explicitly
calculating the default min/max values for the appropriate kind of
sequence.
Reported and patched by Alexey Bashtanov, though I whacked his patch
around a bit. Back-patch to v10 where the faulty logic was added.
Discussion: https://postgr.es/m/cb85a9a5-946b-c7c4-9cf2-6cd6e25d7a33@imap.cc
If we restrict unique constraints on partitioned tables so that they
must always include the partition key, then our standard approach to
unique indexes already works --- each unique key is forced to exist
within a single partition, so enforcing the unique restriction in each
index individually is enough to have it enforced globally. Therefore we
can implement unique indexes on partitions by simply removing a few
restrictions (and adding others.)
Discussion: https://postgr.es/m/20171222212921.hi6hg6pem2w2t36z@alvherre.pgsql
Discussion: https://postgr.es/m/20171229230607.3iib6b62fn3uaf47@alvherre.pgsql
Reviewed-by: Simon Riggs, Jesper Pedersen, Peter Eisentraut, Jaime
Casanova, Amit Langote
All of these are false positives, but in each case a fair amount of
analysis is needed to see that, and it's not too surprising that not all
compilers are smart enough. (In particular, in the logtape.c case, a
compiler lacking the knowledge provided by the Assert would almost surely
complain, so that this warning will be seen in any non-assert build.)
Some of these are of long standing while others are pretty recent,
but it only seems worth fixing them in HEAD.
Jaime Casanova, tweaked a bit by me
Discussion: https://postgr.es/m/CAJGNTeMcYAMJdPAom52dppLMtF-UnEZi0dooj==75OEv1EoBZA@mail.gmail.com
pg_dump supposed that a stats object necessarily shares the same schema
as its underlying table, and that it doesn't have a separate owner.
These things may have been true during early development of the feature,
but they are not true as of v10 release.
Failure to track the object's schema separately turns out to have only
limited consequences, because pg_get_statisticsobjdef() always schema-
qualifies the target object name in the generated CREATE STATISTICS command
(a decision out of step with the rest of ruleutils.c, but I digress).
Therefore the restored object would be in the right schema, so that the
only problem is that the TOC entry would be mislabeled as to schema. That
could lead to wrong decisions for schema-selective restores, for example.
The ownership issue is a bit more serious: not only was the TOC entry
potentially mislabeled as to owner, but pg_dump didn't bother to issue an
ALTER OWNER command at all, so that after restore the stats object would
continue to be owned by the restoring superuser.
A final point is that decisions as to whether to dump a stats object or
not were driven by whether the underlying table was dumped or not. While
that's not wrong on its face, it won't scale nicely to the planned future
extension to cross-table statistics. Moreover, that design decision comes
out of the view of stats objects as being auxiliary to a particular table,
like a rule or trigger, which is exactly where the above problems came
from. Since we're now treating stats objects more like independent objects
in their own right, they ought to behave like standalone objects for this
purpose too. So change to using the generic selectDumpableObject() logic
for them (which presently amounts to "dump if containing schema is to be
dumped").
Along the way to fixing this, restructure so that getExtendedStatistics
collects the identity info (only) for all extended stats objects in one
query, and then for each object actually being dumped, we retrieve the
definition in dumpStatisticsExt. This is necessary to ensure that
schema-qualification in the generated CREATE STATISTICS command happens
with respect to the search path that pg_dump will now be using at restore
time (ie, the schema the stats object is in, not that of the underlying
table). It's probably also significantly faster in the typical scenario
where only a minority of tables have extended stats.
Back-patch to v10 where extended stats were introduced.
Discussion: https://postgr.es/m/18272.1518328606@sss.pgh.pa.us
pg_upgrade has always attempted to ensure that the transient dump files
it creates are inaccessible except to the owner. However, refactoring
in commit 76a7650c4 broke that for the file containing "pg_dumpall -g"
output; since then, that file was protected according to the process's
default umask. Since that file may contain role passwords (hopefully
encrypted, but passwords nonetheless), this is a particularly unfortunate
oversight. Prudent users of pg_upgrade on multiuser systems would
probably run it under a umask tight enough that the issue is moot, but
perhaps some users are depending only on pg_upgrade's umask changes to
protect their data.
To fix this in a future-proof way, let's just tighten the umask at
process start. There are no files pg_upgrade needs to write at a
weaker security level; and if there were, transiently relaxing the
umask around where they're created would be a safer approach.
Report and patch by Tom Lane; the idea for the fix is due to Noah Misch.
Back-patch to all supported branches.
Security: CVE-2018-1053
Issuing 'quit'/'exit' in an empty psql buffer exits psql. Issuing
'quit'/'exit' in a non-empty psql buffer alone on a line with no prefix
whitespace issues a hint on how to exit.
Also add similar 'help' hints for 'help' in a non-empty psql buffer.
Reported-by: Everaldo Canuto
Discussion: https://postgr.es/m/flat/CALVFHFb-C_5_94hueWg6Dd0zu7TfbpT7hzsh9Zf0DEDOSaAnfA%40mail.gmail.com
Author: original author Robert Haas, modified by me
When a password is needed, cases such as
psql -d "postgresql://alice@localhost/testdb" -U bob
would incorrectly prompt for "Password for user bob: ", when actually the
connection will be attempted with username alice. The priority order of
which name to use isn't that important here, but the misleading prompt is.
When we are prompting for a password after initial connection failure,
we can fix this reliably by looking at PQuser(conn) to see how libpq
interpreted the connection arguments. But when we're doing a forced
password prompt because of a -W switch, we can't use that solution.
Fortunately, because the main use of -W is for noninteractive situations,
it's less critical to produce a helpful prompt in such cases. I made
the startup prompt for -W just say "Password: " all the time, rather
than expending extra code on trying to identify which username to use.
In the case of a \c command (after -W has been given), there's already
logic in do_connect that determines whether the "dbname" is a connstring
or URI, so we can avoid lobotomizing the prompt except in cases that
are actually dubious. (We could do similarly in startup.c if anyone
complains, but for now it seems not worthwhile, especially since that
would still be only a partial solution.)
Per bug #15025 from Akos Vandra. Although this is arguably a bug fix,
it doesn't seem worth back-patching. The case where it matters seems
like a very corner-case usage, and someone might complain that we'd
changed the behavior of -W in a minor release.
Discussion: https://postgr.es/m/20180123130013.7407.24749@wrigleys.postgresql.org
We have switches already to suppress other subsidiary object properties,
such as ACLs, security labels, ownership, and tablespaces, so just on
the grounds of symmetry we should allow suppressing comments as well.
Also, commit 0d4e6ed30 added a positive reason to have this feature,
i.e. to allow obtaining the old behavior of selective pg_restore should
anyone desire that.
Recent commits have removed the cases where pg_dump emitted comments on
built-in objects that the restoring user might not have privileges to
comment on, so the original primary motivation for this feature is gone,
but it still seems at least somewhat useful in its own right.
Robins Tharakan, reviewed by Fabrízio Mello
Discussion: https://postgr.es/m/CAEP4nAx22Z4ch74oJGzr5RyyjcyUSbpiFLyeYXX8pehfou92ug@mail.gmail.com
Ensure that CREATE DATABASE and related commands are issued when, and
only when, --create is specified. Previously there were scenarios
where using selective-dump switches would prevent --create from having
any effect. For example, it would fail to do anything in pg_restore
if the archive file had been made by a selective dump, because there
would be no TOC entry for the database.
Since we don't issue \connect either if we don't issue CREATE DATABASE,
this could result in unexpectedly restoring objects into the wrong
database.
Also fix pg_restore's selective restore logic so that when an object is
selected to be restored, we also restore its ACL, comment, and security
label if any. Previously there was no way to get the latter properties
except through tedious mucking about with a -L file. If, for some
reason, you don't want these properties, you can match the old behavior
by adding --no-acl etc.
While at it, try to make _tocEntryRequired() a little better organized
and better documented.
Discussion: https://postgr.es/m/32668.1516848577@sss.pgh.pa.us
We had some pretty ad-hoc handling of the public schema and the plpgsql
extension, which are both presumed to exist in template0 but might be
modified or deleted in the database being dumped.
Up to now, by default pg_dump would emit a CREATE EXTENSION IF NOT EXISTS
command as well as a COMMENT command for plpgsql. The usefulness of the
former is questionable, and the latter caused annoying errors in
non-superuser dump/restore scenarios. Let's instead install a rule that
built-in extensions (identified by having low-numbered OIDs) are not to be
dumped. We were doing it that way already in binary-upgrade mode, so this
just makes regular mode behave the same. It remains true that if someone
has installed a non-default ACL on the plpgsql language, that will get
dumped thanks to the pg_init_privs mechanism. This is more consistent with
the handling of built-in objects of other kinds.
Also, change the very ad-hoc mechanism that was used to avoid dumping
creation and comment commands for the public schema. Instead of hardwiring
a test in _printTocEntry(), make use of the DUMP_COMPONENT_ infrastructure
to mark that schema up-front about what we want to do with it. This has
the visible effect that the public schema won't be mentioned in the output
at all, except for updating its ACL if it has a non-default ACL.
Previously, while it was normally not mentioned, --clean mode would drop
and recreate it, again causing headaches for non-superuser usage. This
change likewise makes the public schema less special and more like other
built-in objects.
If plpgsql, or the public schema, has been removed entirely in the source
DB, that situation won't be reproduced in the destination ... but that
was true before.
Discussion: https://postgr.es/m/29048.1516812451@sss.pgh.pa.us
The folly of not doing this was exposed by the buildfarm: in some cases,
the GUC settings applied through ALTER DATABASE SET may be essential to
interpreting the reloaded data correctly. Another argument why we can't
really get away with the scheme proposed in commit b3f840120 is that it
cannot work for parallel restore: even if the parent process manages to
hang onto the previous GUC state, worker processes would see the state
post-ALTER-DATABASE. (Perhaps we could have dodged that bullet by
delaying DATABASE PROPERTIES restoration to the end of the run, but
that does nothing for the data semantics problem.)
This leaves us with no solution for the default_transaction_read_only issue
that commit 4bd371f6f intended to work around, other than "you gotta remove
such settings before dumping/upgrading". However, in view of the fact that
parallel restore broke that hack years ago and no one has noticed, it's
fair to question how many people care. I'm unexcited about adding a large
dollop of new complexity to handle that corner case.
This would be a one-liner fix, except it turns out that ReconnectToServer
tries to optimize away "redundant" reconnections. While that may have been
valuable when coded, a quick survey of current callers shows that there are
no cases where that's actually useful, so just remove that check. While at
it, remove the function's useless return value.
Discussion: https://postgr.es/m/12453.1516655001@sss.pgh.pa.us
This patch rearranges the division of labor between pg_dump and pg_dumpall
so that pg_dump itself handles all properties attached to a single
database. Notably, a database's ACL (GRANT/REVOKE status) and local GUC
settings established by ALTER DATABASE SET and ALTER ROLE IN DATABASE SET
can be dumped and restored by pg_dump. This is a long-requested
improvement.
"pg_dumpall -g" will now produce only role- and tablespace-related output,
nothing about individual databases. The total output of a regular
pg_dumpall run remains the same.
pg_dump (or pg_restore) will restore database-level properties only when
creating the target database with --create. This applies not only to
ACLs and GUCs but to the other database properties it already handled,
that is database comments and security labels. This is more consistent
and useful, but does represent an incompatibility in the behavior seen
without --create.
(This change makes the proposed patch to have pg_dump use "COMMENT ON
DATABASE CURRENT_DATABASE" unnecessary, since there is no case where
the command is issued that we won't know the true name of the database.
We might still want that patch as a feature in its own right, but pg_dump
no longer needs it.)
pg_dumpall with --clean will now drop and recreate the "postgres" and
"template1" databases in the target cluster, allowing their locale and
encoding settings to be changed if necessary, and providing a cleaner
way to set nondefault tablespaces for them than we had before. This
means that such a script must now always be started in the "postgres"
database; the order of drops and reconnects will not work otherwise.
Without --clean, the script will not adjust any database-level properties
of those two databases (including their comments, ACLs, and security
labels, which it formerly would try to set).
Another minor incompatibility is that the CREATE DATABASE commands in a
pg_dumpall script will now always specify locale and encoding settings.
Formerly those would be omitted if they matched the cluster's default.
While that behavior had some usefulness in some migration scenarios,
it also posed a significant hazard of unwanted locale/encoding changes.
To migrate to another locale/encoding, it's now necessary to use pg_dump
without --create to restore into a database with the desired settings.
Commit 4bd371f6f's hack to emit "SET default_transaction_read_only = off"
is gone: we now dodge that problem by the expedient of not issuing ALTER
DATABASE SET commands until after reconnecting to the target database.
Therefore, such settings won't apply during the restore session.
In passing, improve some shaky grammar in the docs, and add a note pointing
out that pg_dumpall's output can't be expected to load without any errors.
(Someday we might want to fix that, but this is not that patch.)
Haribabu Kommi, reviewed at various times by Andreas Karlsson,
Vaishnavi Prabakaran, and Robert Haas; further hacking by me.
Discussion: https://postgr.es/m/CAJrrPGcUurV0eWTeXODwsOYFN=Ekq36t1s0YnFYUNzsmRfdAyA@mail.gmail.com
Most of the code in pg_dump dumps an object's comment, security label,
and ACL auxiliary TOC entries, in that order, immediately after the
object's main TOC entry, and at least dumpComment's API spec says this
isn't optional. dumpDatabase was significantly violating that when
in binary-upgrade mode, by inserting totally unrelated stuff between.
Also, dumpForeignDataWrapper and dumpForeignServer were being randomly
inconsistent. Reorder code so everybody does it the same.
This may be future-proofing us against some code growing a requirement for
such auxiliary entries to be adjacent to their main entry. But for now
it's just neatnik-ism, so I see no need for back-patch.
Discussion: https://postgr.es/m/21714.1516553459@sss.pgh.pa.us
_tocEntryRequired() expects that it can identify ACL, SECURITY LABEL,
and COMMENT TOC entries that are for large objects by seeing whether
the tag for them starts with "LARGE OBJECT ". While that works fine
for actual large objects, which are indeed tagged that way, it's
subject to false positives unless every such entry's tag starts with an
appropriate type ID. And in fact it does not work for ACLs, because
up to now we customarily tagged those entries with just the bare name
of the object. This means that an ACL for an object named
"LARGE OBJECT something" would be misclassified as data not schema,
with undesirable results in a schema-only or data-only dump ---
although pg_upgrade seems unaffected, due to the special case for
binary-upgrade mode further down in _tocEntryRequired().
We can fix this by changing all the dumpACL calls to use the label
strings already in use for comments and security labels, which do
follow the convention of starting with an object type indicator.
Well, mostly they follow it. dumpDatabase() got it wrong, using
just the bare database name for those purposes, so that a database
named "LARGE OBJECT something" would similarly be subject to having
its comment or security label dropped or included when not wanted.
Bring that into line too. (Note that up to now, database ACLs have
not been processed by pg_dump, so that this issue doesn't affect them.)
_tocEntryRequired() itself is not free of fault: it was overly liberal
about matching object tags to "LARGE OBJECT " in binary-upgrade mode.
This looks like it is probably harmless because there would be no data
component to strip anyway in that mode, but at best it's trouble
waiting to happen, so tighten that up too.
The possible misclassification of SECURITY LABEL entries for databases is
in principle a security problem, but the opportunities for actual exploits
seem too narrow to be interesting. The other cases seem like just bugs,
since an object owner can change its ACL or comment for himself, he needn't
try to trick someone else into doing it by choosing a strange name.
This has been broken since per-large-object TOC entries were introduced
in 9.0, so back-patch to all supported branches.
Discussion: https://postgr.es/m/21714.1516553459@sss.pgh.pa.us
Add support for huge pages (called large pages on Windows) to the
Windows build.
This (probably) breaks compatibility with Windows versions prior to
Windows 2003 or Windows Vista.
Authors: Takayuki Tsunakawa and Thomas Munro
Reviewed by: Magnus Hagander, Amit Kapila
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
This was nearly the same code. Extend wait_for_catchup to allow waiting
for pg_current_wal_lsn() and use that in the subscription tests. Also
change one use in the pg_rewind tests to use this.
Also remove some broken code in wait_for_catchup and
wait_for_slot_catchup. The error message in case the waiting failed
wanted to show the current LSN, but the way it was written never
worked. So since nobody ever cared, just remove it.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Added:
- variable now might contain integer, double, boolean and null values
- functions ln, exp
- logical AND/OR/NOT
- bitwise AND/OR/NOT/XOR
- bit right/left shift
- comparison operators
- IS [NOT] (NULL|TRUE|FALSE)
- conditional choice (in form of when/case/then)
New operations and functions allow to implement more complicated test scenario.
Author: Fabien Coelho with minor editorization by me
Reviewed-By: Pavel Stehule, Jeevan Ladhe, me
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.10.1604030742390.31618@sto
Previously an inaccurate but harmless error was generated when running
--check on a live server before reporting the servers as compatible.
The fix is to split error reporting and exit control in the exec_prog()
API.
Reported-by: Daniel Westermann
Backpatch-through: 10
Upcoming versions of glibc will contain copy_file_range(2), a wrapper
around a new linux syscall for in-kernel copying of data ranges. This
conflicts with pg_rewinds function of the same name.
Therefore rename pg_rewinds version. As our version isn't a generic
copying facility we decided to choose a rewind specific function name.
Per buildfarm animal caiman and subsequent discussion with Tom Lane.
Author: Andres Freund
Discussion:
https://postgr.es/m/20180103033425.w7jkljth3e26sduc@alap3.anarazel.dehttps://postgr.es/m/31122.1514951044@sss.pgh.pa.us
Backpatch: 9.5-, where pg_rewind was introduced
Various Perl scripts we use to generate files were in the habit of
printing things like "generated by $0" into their output files.
That looks like a fine idea at first glance, but it results in
non-reproducible output, because in VPATH builds $0 won't be just
the name of the script file, but a full path for it. We'd prefer
that you get identical results whether using VPATH or not, so this
is a bad thing.
Some of these places also printed their input file name(s), causing
an additional hazard of the same type.
Hence, establish a policy that thou shalt not print $0, nor input file
pathnames, into output files (they're still allowed in error messages,
though). Instead just write the script name verbatim. While we are at
it, we can make these annotations more useful by giving the script's
full relative path name within the PG source tree, eg instead of
Gen_fmgrtab.pl let's print src/backend/utils/Gen_fmgrtab.pl.
Not all of the changes made here actually affect any files shipped
in finished tarballs today, but it seems best to apply the policy
everyplace so that nobody copies unsafe code into places where it
could matter.
Christoph Berg and Tom Lane
Discussion: https://postgr.es/m/20171215102223.GB31812@msg.df7cb.de