Support for running postgres on Alpha hasn't been tested for a long
while. Due to Alpha's uniquely lax cache coherency model it's a hard
to develop for platform (especially blindly!) and thought to be
unlikely to currently work correctly.
As Alpha is the only supported architecture for Tru64 drop support for
it as well. Tru64's support has ended 2012 and it has been in
maintenance-only mode for much longer.
Also remove stray references to __ksr__ and ultrix defines.
Instead of truncating pg_multixact at vacuum time, do it only at
checkpoint time. The reason for doing it this way is twofold: first, we
want it to delete only segments that we're certain will not be required
if there's a crash immediately after the removal; and second, we want to
do it relatively often so that older files are not left behind if
there's an untimely crash.
Per my proposal in
http://www.postgresql.org/message-id/20140626044519.GJ7340@eldon.alvh.no-ip.org
we now execute the truncation in the checkpointer process rather than as
part of vacuum. Vacuum is in only charge of maintaining in shared
memory the value to which it's possible to truncate the files; that
value is stored as part of checkpoints also, and so upon recovery we can
reuse the same value to re-execute truncate and reset the
oldest-value-still-safe-to-use to one known to remain after truncation.
Per bug reported by Jeff Janes in the course of his tests involving
bug #8673.
While at it, update some comments that hadn't been updated since
multixacts were changed.
Backpatch to 9.3, where persistency of pg_multixact files was
introduced by commit 0ac5ad5134.
These should not have existed to begin with, but there was apparently some
misunderstanding of the purpose of the opr_sanity regression test item
that checks for operator implementation functions with their own comments.
The idea there is to check for unintentional violations of the rule that
operator implementation functions shouldn't be documented separately
.... but for these functions, that is in fact what we want, since the
variadic option is useful and not accessible via the operator syntax.
Get rid of the extra pg_proc entries and fix the regression test and
documentation to be explicit about what we're doing here.
The catcache code is effectively assuming this already, so let's insist
that the catalog and index are actually declared that way.
Having done that, the comments in indexing.h about non-unique indexes
not being used for catcaches are completely redundant not just mostly so;
and we didn't have such a comment for every such index anyway. So let's
get rid of them.
Per discussion of whether we should identify primary keys for catalogs.
We might or might not take that further step, but this change in itself
will allow quicker detection of misdeclared catcaches, so it seems worth
doing in any case.
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
ExecMakeTableFunctionResult evaluated the arguments for a function-in-FROM
in the query-lifespan memory context. This is insignificant in simple
cases where the function relation is scanned only once; but if the function
is in a sub-SELECT or is on the inside of a nested loop, any memory
consumed during argument evaluation can add up quickly. (The potential for
trouble here had been foreseen long ago, per existing comments; but we'd
not previously seen a complaint from the field about it.) To fix, create
an additional temporary context just for this purpose.
Per an example from MauMau. Back-patch to all active branches.
Commit ea9df812d8 failed to include
NUM_BUFFER_PARTITIONS in this offset, resulting in a bad offset.
Ultimately this threw off NUM_FIXED_LWLOCKS which is based on
earlier offsets, leading to memory allocation problems. It seems
likely to have also caused increased LWLOCK contention when
serializable transactions were used, because lightweight locks used
for that overlapped others.
Reported by Amit Kapila with analysis and fix.
Backpatch to 9.4, where the bug was introduced.
data_directory could be set both in postgresql.conf and postgresql.auto.conf so far.
This could cause some problematic situations like circular definition. To avoid such
situations, this commit forbids a user to set data_directory in postgresql.auto.conf.
Backpatch this to 9.4 where ALTER SYSTEM command was introduced.
Amit Kapila, reviewed by Abhijit Menon-Sen, with minor adjustments by me.
This SQL-standard feature allows a sub-SELECT yielding multiple columns
(but only one row) to be used to compute the new values of several columns
to be updated. While the same results can be had with an independent
sub-SELECT per column, such a workaround can require a great deal of
duplicated computation.
The standard actually says that the source for a multi-column assignment
could be any row-valued expression. The implementation used here is
tightly tied to our existing sub-SELECT support and can't handle other
cases; the Bison grammar would have some issues with them too. However,
I don't feel too bad about this since other cases can be converted into
sub-SELECTs. For instance, "SET (a,b,c) = row_valued_function(x)" could
be written "SET (a,b,c) = (SELECT * FROM row_valued_function(x))".
Since most of the system thinks AND and OR are N-argument expressions
anyway, let's have the grammar generate a representation of that form when
dealing with input like "x AND y AND z AND ...", rather than generating
a deeply-nested binary tree that just has to be flattened later by the
planner. This avoids stack overflow in parse analysis when dealing with
queries having more than a few thousand such clauses; and in any case it
removes some rather unsightly inconsistencies, since some parts of parse
analysis were generating N-argument ANDs/ORs already.
It's still possible to get a stack overflow with weirdly parenthesized
input, such as "x AND (y AND (z AND ( ... )))", but such cases are not
mainstream usage. The maximum depth of parenthesization is already
limited by Bison's stack in such cases, anyway, so that the limit is
probably fairly platform-independent.
Patch originally by Gurjeet Singh, heavily revised by me
This function is pervasive on free software operating systems; import
NetBSD's implementation. Back-patch to 8.4, like the commit that will
harness it.
The previous naming broke the query that libpq's lo_initialize() uses
to collect the OIDs of the server-side functions it requires, because
that query effectively assumes that there is only one function named
lo_create in the pg_catalog schema (and likewise only one lo_open, etc).
While we should certainly make libpq more robust about this, the naive
query will remain in use in the field for the foreseeable future, so it
seems the only workable choice is to use a different name for the new
function. lo_from_bytea() won a small straw poll.
Back-patch into 9.4 where the new function was introduced.
Change the order of checks in similar functions to be the same; remove
a parameter that's not needed anymore; rename a memory context and
expand a couple of comments.
Per review comments from Amit Kapila
In a50d976254 I already changed this, but got it wrong for the case
where the number of members is larger than the number of entries that
fit in the last page of the last segment.
As reported by Serge Negodyuck in a followup to bug #8673.
It's critical that the backend's idea of LOBLKSIZE match the way data has
actually been divided up in pg_largeobject. While we don't provide any
direct way to adjust that value, doing so is a one-line source code change
and various people have expressed interest recently in changing it. So,
just as with TOAST_MAX_CHUNK_SIZE, it seems prudent to record the value in
pg_control and cross-check that the backend's compiled-in setting matches
the on-disk data.
Also tweak the code in inv_api.c so that fetches from pg_largeobject
explicitly verify that the length of the data field is not more than
LOBLKSIZE. Formerly we just had Asserts() for that, which is no protection
at all in production builds. In some of the call sites an overlength data
value would translate directly to a security-relevant stack clobber, so it
seems worth one extra runtime comparison to be sure.
In the back branches, we can't change the contents of pg_control; but we
can still make the extra checks in inv_api.c, which will offer some amount
of protection against running with the wrong value of LOBLKSIZE.
Previously there's been a mix between 'slotname' and 'slot_name'. It's
not nice to be unneccessarily inconsistent in a new feature. As a post
beta1 initdb now is required in the wake of eeca4cd35e, fix the
inconsistencies.
Most the changes won't affect usage of replication slots because the
majority of changes is around function parameter names. The prominent
exception to that is that the recovery.conf parameter
'primary_slotname' is now named 'primary_slot_name'.
The way the code was written, the padding was copied from uninitialized
memory areas.. Because the structs are local variables in the code where
the WAL records are constructed, making them larger and zeroing the padding
bytes would not make the code very pretty, so rather than fixing this
directly by zeroing out the padding bytes, it seems more clear to not try to
align the tuples in the WAL records. The redo functions are taught to copy
the tuple header to a local variable to avoid unaligned access.
Stable-branches have the same problem, but we can't change the WAL format
there, so fix in master only. Reading a few random extra bytes at the stack
is harmless in practice, so it's not worth crafting a different
back-patchable fix.
Per reports from Kevin Grittner and Andres Freund, using clang static
analyzer and Valgrind, respectively.
This is needed to allow ORDER BY, DISTINCT, etc to work as expected for
pg_lsn values.
We had previously decided to put this off for 9.5, but in view of commit
eeca4cd35e there's no reason to avoid a
catversion bump for 9.4beta2, and this does make a pretty significant
usability difference for pg_lsn.
Michael Paquier, with fixes from Andres Freund and Tom Lane
This should have been done in 6bc8ef0b7f
and/or 50e547096c, but better late than
never. If we don't change this then we risk 9.3 pg_controldata or
pg_resetxlog being inappropriately used against a 9.4 pg_control file,
or vice versa.
187492b6c2 changed pgstat.c so that
the stats files were saved into $PGDATA/pg_stat directory when the server
was shutdowned. But it accidentally forgot to change the location of
pg_stat_statements permanent stats file. This commit fixes pg_stat_statements
so that its stats file is also saved into $PGDATA/pg_stat at shutdown.
Since this fix changes the file layout, we don't back-patch it to 9.3
where this oversight was introduced.
In general it's not a good idea for built-in types in the 'U' category
to be marked preferred; they could draw behavior away from user-defined
types with similarly-named operators. pg_lsn is probably at low risk
of that right now given the lack of casts between it and other types,
but that doesn't make this marking OK.
Ordinarily we'd bump catversion when changing any predefined catalog
contents like this, but since we're past beta1, the costs of a forced
initdb seem to outweigh the benefits of guaranteed behavioral consistency.
There's not any known behavioral impact today anyway --- this is more
in the nature of being sure there's not problems in future.
Per an off-list complaint from Thomas Fanghaenel.
Allow the contrib/uuid-ossp extension to be built atop any one of these
three popular UUID libraries. (The extension's name is now arguably a
misnomer, but we'll keep it the same so as not to cause unnecessary
compatibility issues for users.)
We would not normally consider a change like this post-beta1, but the issue
has been forced by our upgrade to autoconf 2.69, whose more rigorous header
checks are causing OSSP's header files to be rejected on some platforms.
It's been foreseen for some time that we'd have to move away from depending
on OSSP UUID due to lack of upstream maintenance, so this is a down payment
on that problem.
While at it, add some simple regression tests, in hopes of catching any
major incompatibilities between the three implementations.
Matteo Beccati, with some further hacking by me
In yesterday's commit 2dc4f011fd, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done). This tripped over the fact that Windows
doesn't support _IOLBF mode. We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows. Export that
solution in port.h and use it in initdb.
Back-patch to 8.4, like the previous commit.
To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.
To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.
Backpatch to all supported versions.
rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr. Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext. There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap. Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.
Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).
Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.
The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.
There's no longer much pressure to switch the default GIN opclass for
jsonb, but there was still some unhappiness with the name "jsonb_hash_ops",
since hashing is no longer a distinguishing property of that opclass,
and anyway it seems like a relatively minor detail. At the suggestion of
Heikki Linnakangas, we'll use "jsonb_path_ops" instead; that captures the
important characteristic that each index entry depends on the entire path
from the document root to the indexed value.
Also add a user-facing explanation of the implementation properties of
these two opclasses.
Fix JSONB_MAX_ELEMS and JSONB_MAX_PAIRS macros to use CB_MASK in the
calculation. JENTRY_POSMASK happens to have the same value at the moment,
but that's just coincidental.
Refactor jsonb iterator functions, for readability.
Get rid of the JENTRY_ISFIRST flag. Whenever we handle JEntrys, we have
access to the whole array and have enough context information to know
which entry is the first. This frees up one bit in the JEntry header for
future use. While we're at it, shuffle the JEntry bits so that boolean
true and false go together, for aesthetic reasons.
Bump catalog version as this changes the on-disk format slightly.
Change the key representation so that values that would exceed 127 bytes
are hashed into short strings, and so that the original JSON datatype of
each value is recorded in the index. The hashing rule eliminates the major
objection to having this opclass be the default for jsonb, namely that it
could fail for plausible input data (due to GIN's restrictions on maximum
key length). Preserving datatype information doesn't really buy us much
right now, but it requires no extra space compared to the previous way,
and it might be useful later.
Also, change the consistency-checking functions to request recheck for
exists (jsonb ? text) and related operators. The original analysis that
this is an exactly checkable query was incorrect, since the index does
not preserve information about whether a key appears at top level in
the indexed JSON object. Add a test case demonstrating the problem.
Make some other, mostly cosmetic improvements to the code in jsonb_gin.c
as well.
catversion bump due to on-disk data format change in jsonb_ops indexes.
Per discussion, the old value of 128MB is ridiculously small on modern
machines; in fact, it's not even any larger than the default value of
shared_buffers, which it certainly should be. Increase to 4GB, which
is unlikely to be any worse than the old default for anyone, and should
be noticeably better for most. Eventually we might have an autotuning
scheme for this setting, but the recent attempt crashed and burned,
so for now just do this.
This reverts commit ee1e5662d8, as well as
a remarkably large number of followup commits, which were mostly concerned
with the fact that the implementation didn't work terribly well. It still
doesn't: we probably need some rather basic work in the GUC infrastructure
if we want to fully support GUCs whose default varies depending on the
value of another GUC. Meanwhile, it also emerged that there wasn't really
consensus in favor of the definition the patch tried to implement (ie,
effective_cache_size should default to 4 times shared_buffers). So whack
it all back to where it was. In a followup commit, I'll do what was
recently agreed to, which is to simply change the default to a higher
value.
Previous commit was confused about the case we're handling: actually,
what the patch is dealing with is platforms that have optreset, *and*
have <getopt.h>, but the latter fails to declare the former. Because
we use a linking probe to set HAVE_INT_OPTRESET, we need to be sure we
have a declaration even if <getopt.h> doesn't think it exists.
Reportedly, some versions of mingw are like that, and it seems plausible
in general that older platforms might be that way. However, we'd
determined experimentally that just doing "extern int" conflicts with
the way Cygwin declares these variables, so explicitly exclude Cygwin.
Michael Paquier, tweaked by me to hopefully not break Cygwin
Just as we would start bgworkers immediately after an initial startup
of the server, we should restart them immediately when reinitializing.
Petr Jelinek and Robert Haas
The main target of this cleanup is the convertJsonb() function, but I also
touched a lot of other things that I spotted into in the process.
The new convertToJsonb() function uses an output buffer that's resized on
demand, so the code to estimate of the size of JsonbValue is removed.
The on-disk format was not changed, even though I refactored the structs
used to handle it. The term "superheader" is replaced with "container".
The jsonb_exists_any and jsonb_exists_all functions no longer sort the input
array. That was a premature optimization, the idea being that if there are
duplicates in the input array, you only need to check them once. Also,
sorting the array saves some effort in the binary search used to find a key
within an object. But there were drawbacks too: the sorting and
deduplicating obviously isn't free, and in the typical case there are no
duplicates to remove, and the gain in the binary search was minimal. Remove
all that, which makes the code simpler too.
This includes a bug-fix; the total length of the elements in a jsonb array
or object mustn't exceed 2^28. That is now checked.
Commit 261c7d4b65 removed the "m" field
from struct LINE, but neglected to make pg_type.h's idea of the type's
size match. This resulted in reading past the end of palloc'd LINE
values when inserting them into tuples etc. In principle that could
cause a SIGSEGV, though the odds of detectable problems seem low.
Bump catversion since this makes an incompatible on-disk format change.
Note that if the line type had been in use in the field, this would
break pg_upgrade'ability of databases containing line values; but
it seems unlikely that there are any (they'd have had to be compiled
with -DENABLE_LINE_TYPE).
Spotted by Andres Freund.
It's easy to forget using SYSTEMQUOTEs when constructing command strings
for system() or popen(). Even if we fix all the places missing it now, it is
bound to be forgotten again in the future. Introduce wrapper functions that
do the the extra quoting for you, and get rid of SYSTEMQUOTEs in all the
callers.
We previosly used SYSTEMQUOTEs in all the hard-coded command strings, and
this doesn't change the behavior of those. But user-supplied commands, like
archive_command, restore_command, COPY TO/FROM PROGRAM calls, as well as
pgbench's \shell, will now gain an extra pair of quotes. That is desirable,
but if you have existing scripts or config files that include an extra
pair of quotes, those might need to be adjusted.
Reviewed by Amit Kapila and Tom Lane
If we have an array of records stored on disk, the individual record fields
cannot contain out-of-line TOAST pointers: the tuptoaster.c mechanisms are
only prepared to deal with TOAST pointers appearing in top-level fields of
a stored row. The same applies for ranges over composite types, nested
composites, etc. However, the existing code only took care of expanding
sub-field TOAST pointers for the case of nested composites, not for other
structured types containing composites. For example, given a command such
as
UPDATE tab SET arraycol = ARRAY[(ROW(x,42)::mycompositetype] ...
where x is a direct reference to a field of an on-disk tuple, if that field
is long enough to be toasted out-of-line then the TOAST pointer would be
inserted as-is into the array column. If the source record for x is later
deleted, the array field value would become a dangling pointer, leading
to errors along the line of "missing chunk number 0 for toast value ..."
when the value is referenced. A reproducible test case for this was
provided by Jan Pecek, but it seems likely that some of the "missing chunk
number" reports we've heard in the past were caused by similar issues.
Code-wise, the problem is that PG_DETOAST_DATUM() is not adequate to
produce a self-contained Datum value if the Datum is of composite type.
Seen in this light, the problem is not just confined to arrays and ranges,
but could also affect some other places where detoasting is done in that
way, for example form_index_tuple().
I tried teaching the array code to apply toast_flatten_tuple_attribute()
along with PG_DETOAST_DATUM() when the array element type is composite,
but this was messy and imposed extra cache lookup costs whether or not any
TOAST pointers were present, indeed sometimes when the array element type
isn't even composite (since sometimes it takes a typcache lookup to find
that out). The idea of extending that approach to all the places that
currently use PG_DETOAST_DATUM() wasn't attractive at all.
This patch instead solves the problem by decreeing that composite Datum
values must not contain any out-of-line TOAST pointers in the first place;
that is, we expand out-of-line fields at the point of constructing a
composite Datum, not at the point where we're about to insert it into a
larger tuple. This rule is applied only to true composite Datums, not
to tuples that are being passed around the system as tuples, so it's not
as invasive as it might sound at first. With this approach, the amount
of code that has to be touched for a full solution is greatly reduced,
and added cache lookup costs are avoided except when there actually is
a TOAST pointer that needs to be inlined.
The main drawback of this approach is that we might sometimes dereference
a TOAST pointer that will never actually be used by the query, imposing a
rather large cost that wasn't there before. On the other side of the coin,
if the field value is used multiple times then we'll come out ahead by
avoiding repeat detoastings. Experimentation suggests that common SQL
coding patterns are unaffected either way, though. Applications that are
very negatively affected could be advised to modify their code to not fetch
columns they won't be using.
In future, we might consider reverting this solution in favor of detoasting
only at the point where data is about to be stored to disk, using some
method that can drill down into multiple levels of nested structured types.
That will require defining new APIs for structured types, though, so it
doesn't seem feasible as a back-patchable fix.
Note that this patch changes HeapTupleGetDatum() from a macro to a function
call; this means that any third-party code using that macro will not get
protection against creating TOAST-pointer-containing Datums until it's
recompiled. The same applies to any uses of PG_RETURN_HEAPTUPLEHEADER().
It seems likely that this is not a big problem in practice: most of the
tuple-returning functions in core and contrib produce outputs that could
not possibly be toasted anyway, and the same probably holds for third-party
extensions.
This bug has existed since TOAST was invented, so back-patch to all
supported branches.
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
pg_controldata includes postgres.h not postgres_fe.h, so utils/palloc.h
must be able to compile in a "#define FRONTEND" context. It appears that
Solaris Studio is smart enough to persuade us to define PG_USE_INLINE,
but not smart enough to not make a copy of unreferenced static functions;
which leads to an unsatisfied reference to CurrentMemoryContext. So we
need an #ifndef FRONTEND around that declaration. Per buildfarm.
This breaks the principle that common/ ought not depend on anything in the
server, not only code-wise but in the headers. The only arguable advantage
is avoidance of duplication of half a dozen extern declarations, and even
that is rather dubious, considering that the previous coding was wrong
about which declarations to duplicate: it exposed pnstrdup() to frontend
code even though no such function is provided in fe_memutils.c.
On the same principle, don't #include utils/memutils.h in the frontend
build of psprintf.c. This requires duplicating the definition of
MaxAllocSize, but that seems fine to me: there's no a-priori reason why
frontend code should use the same size limit as the backend anyway.
In passing, clean up some rather odd layout and ordering choices that
were imposed on palloc.h to reduce the number of #ifdefs required by
the previous approach.
Per gripe from Christoph Berg. There's still more work to do to make
include/common/ clean, but this part seems reasonably noncontroversial.
If a tuple is locked, and this lock is later upgraded either to an
update or to a stronger lock, and in the meantime some other process
tries to lock, update or delete the same tuple, it (the tuple) could end
up being updated twice, or having conflicting locks held.
The reason for this is that the second updater checks for a change in
Xmax value, or in the HEAP_XMAX_IS_MULTI infomask bit, after noticing
the first lock; and if there's a change, it restarts and re-evaluates
its ability to update the tuple. But it neglected to check for changes
in lock strength or in lock-vs-update status when those two properties
stayed the same. This would lead it to take the wrong decision and
continue with its own update, when in reality it shouldn't do so but
instead restart from the top.
This could lead to either an assertion failure much later (when a
multixact containing multiple updates is detected), or duplicate copies
of tuples.
To fix, make sure to compare the other relevant infomask bits alongside
the Xmax value and HEAP_XMAX_IS_MULTI bit, and restart from the top if
necessary.
Also, in the belt-and-suspenders spirit, add a check to
MultiXactCreateFromMembers that a multixact being created does not have
two or more members that are claimed to be updates. This should protect
against other bugs that might cause similar bogus situations.
Backpatch to 9.3, where the possibility of multixacts containing updates
was introduced. (In prior versions it was possible to have the tuple
lock upgraded from shared to exclusive, and an update would not restart
from the top; yet we're protected against a bug there because there's
always a sleep to wait for the locking transaction to complete before
continuing to do anything. Really, the fact that tuple locks always
conflicted with concurrent updates is what protected against bugs here.)
Per report from Andrew Dunstan and Josh Berkus in thread at
http://www.postgresql.org/message-id/534C8B33.9050807@pgexperts.com
Bug analysis by Andres Freund.
pg_sequence_parameters() and pg_identify_object() have had incorrect
proallargtypes entries since 9.1 and 9.3 respectively. This was mostly
masked by the correct information in proargtypes, but a few operations
such as pg_get_function_arguments() (and thus psql's \df display) would
show the wrong data types for these functions' input parameters.
In HEAD, fix the wrong info, bump catversion, and add an opr_sanity
regression test to catch future mistakes of this sort.
In the back branches, just fix the wrong info so that installations
initdb'd with future minor releases will have the right data. We
can't force an initdb, and it doesn't seem like a good idea to add
a regression test that will fail on existing installations.
Andres Freund
Before 9.4, such an aggregate couldn't be declared, because its final
function would have to have polymorphic result type but no polymorphic
argument, which CREATE FUNCTION would quite properly reject. The
ordered-set-aggregate patch found a workaround: allow the final function
to be declared as accepting additional dummy arguments that have types
matching the aggregate's regular input arguments. However, we failed
to notice that this problem applies just as much to regular aggregates,
despite the fact that we had a built-in regular aggregate array_agg()
that was known to be undeclarable in SQL because its final function
had an illegal signature. So what we should have done, and what this
patch does, is to decouple the extra-dummy-arguments behavior from
ordered-set aggregates and make it generally available for all aggregate
declarations. We have to put this into 9.4 rather than waiting till
later because it slightly alters the rules for declaring ordered-set
aggregates.
The patch turned out a bit bigger than I'd hoped because it proved
necessary to record the extra-arguments option in a new pg_aggregate
column. I'd thought we could just look at the final function's pronargs
at runtime, but that didn't work well for variadic final functions.
It's probably just as well though, because it simplifies life for pg_dump
to record the option explicitly.
While at it, fix array_agg() to have a valid final-function signature,
and add an opr_sanity test to notice future deviations from polymorphic
consistency. I also marked the percentile_cont() aggregates as not
needing extra arguments, since they don't.
When marking a branch as half-dead, a pointer to the top of the branch is
stored in the leaf block's hi-key. During normal operation, the high key
was left in place, and the block number was just stored in the ctid field
of the high key tuple, but in WAL replay, the high key was recreated as a
truncated tuple with zero columns. For the sake of easier debugging, also
truncate the tuple in normal operation, so that the page is identical
after WAL replay. Also, rename the 'downlink' field in the WAL record to
'topparent', as that seems like a more descriptive name. And make sure
it's set to invalid when unlinking the leaf page.
Some ancient comments claimed that fn_nargs could be -1 to indicate a
variable number of input arguments; but this was never implemented, and
is at variance with what we ultimately did with "variadic" functions.
Update the comments.
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
These are natural complements to the functions added by commit
0886fc6a5c, but they weren't included
in the original patch for some reason. Add them.
Patch by me, per a complaint by Tom Lane. Review by Tatsuo
Ishii.
This allows squeezing out the unused space in full-page writes. And more
importantly, it can be a useful debugging aid.
In hindsight we should've done this back when GIN was added - we wouldn't
need the 'maxoff' field in the page opaque struct if we had used pd_lower
and pd_upper like on normal pages. But as long as there can be pages in the
index that have been binary-upgraded from pre-9.4 versions, we can't rely
on that, and have to continue using 'maxoff'.
Most of the code churn comes from renaming some macros, now that they're
used on internal pages, too.
This change is completely backwards-compatible, no effect on pg_upgrade.
Repositioning the tuplestore seek pointer in window_gettupleslot() turns
out to be a very significant expense when the window frame is sizable and
the frame end can move. To fix, introduce a tuplestore function for
skipping an arbitrary number of tuples in one call, parallel to the one we
introduced for tuplesort objects in commit 8d65da1f. This reduces the cost
of window_gettupleslot() to O(1) if the tuplestore has not spilled to disk.
As in the previous commit, I didn't try to do any real optimization of
tuplestore_skiptuples for the case where the tuplestore has spilled to
disk. There is probably no practical way to get the cost to less than O(N)
anyway, but perhaps someone can think of something later.
Also fix PersistHoldablePortal() to make use of this API now that we have
it.
Based on a suggestion by Dean Rasheed, though this turns out not to look
much like his patch.
Views which are marked as security_barrier must have their quals
applied before any user-defined quals are called, to prevent
user-defined functions from being able to see rows which the
security barrier view is intended to prevent them from seeing.
Remove the restriction on security barrier views being automatically
updatable by adding a new securityQuals list to the RTE structure
which keeps track of the quals from security barrier views at each
level, independently of the user-supplied quals. When RTEs are
later discovered which have securityQuals populated, they are turned
into subquery RTEs which are marked as security_barrier to prevent
any user-supplied quals being pushed down (modulo LEAKPROOF quals).
Dean Rasheed, reviewed by Craig Ringer, Simon Riggs, KaiGai Kohei
First installment of the promised moving-aggregate support in built-in
aggregates: count(), sum(), avg(), stddev() and variance() for
assorted datatypes, though not for float4/float8.
In passing, remove a 2001-vintage kluge in interval_accum(): interval
array elements have been properly aligned since around 2003, but
nobody remembered to take out this workaround. Also, fix a thinko
in the opr_sanity tests for moving-aggregate catalog entries.
David Rowley and Florian Pflug, reviewed by Dean Rasheed
Until now, when executing an aggregate function as a window function
within a window with moving frame start (that is, any frame start mode
except UNBOUNDED PRECEDING), we had to recalculate the aggregate from
scratch each time the frame head moved. This patch allows an aggregate
definition to include an alternate "moving aggregate" implementation
that includes an inverse transition function for removing rows from
the aggregate's running state. As long as this can be done successfully,
runtime is proportional to the total number of input rows, rather than
to the number of input rows times the average frame length.
This commit includes the core infrastructure, documentation, and regression
tests using user-defined aggregates. Follow-on commits will update some
of the built-in aggregates to use this feature.
David Rowley and Florian Pflug, reviewed by Dean Rasheed; additional
hacking by me
This operator class can accelerate subnet/supernet tests as well as
btree-equivalent ordered comparisons. It also handles a new network
operator inet && inet (overlaps, a/k/a "is supernet or subnet of"),
which is expected to be useful in exclusion constraints.
Ideally this opclass would be the default for GiST with inet/cidr data,
but we can't mark it that way until we figure out how to do a more or
less graceful transition from the current situation, in which the
really-completely-bogus inet/cidr opclasses in contrib/btree_gist are
marked as default. Having the opclass in core and not default is better
than not having it at all, though.
While at it, add new documentation sections to allow us to officially
document GiST/GIN/SP-GiST opclasses, something there was never a clear
place to do before. I filled these in with some simple tables listing
the existing opclasses and the operators they support, but there's
certainly scope to put more information there.
Emre Hasegeli, reviewed by Andreas Karlsson, further hacking by me
Instead of storing the ID of the dynamic shared memory control
segment in a file within the data directory, store it in the main
control segment. This avoids a number of nasty corner cases,
most seriously that doing an online backup and then using it on
the same machine (e.g. to fire up a standby) would result in the
standby clobbering all of the master's dynamic shared memory
segments.
Per complaints from Heikki Linnakangas, Fujii Masao, and Tom
Lane.
These functions won't throw an error if the object doesn't exist,
or if (for functions and operators) there's more than one matching
object.
Yugo Nagata and Nozomi Anzai, reviewed by Amit Khandekar, Marti
Raudsepp, Amit Kapila, and me.
VALIDATE CONSTRAINT
CLUSTER ON
SET WITHOUT CLUSTER
ALTER COLUMN SET STATISTICS
ALTER COLUMN SET ()
ALTER COLUMN RESET ()
All other sub-commands use AccessExclusiveLock
Simon Riggs and Noah Misch
Reviews by Robert Haas and Andres Freund
This is needed because Windows services may get started with a different
current directory than where pg_ctl is executed. We want relative -D
paths to be interpreted relative to pg_ctl's CWD, similarly to what
happens on other platforms.
In support of this, move the backend's make_absolute_path() function
into src/port/path.c (where it probably should have been long since)
and get rid of the rather inferior version in pg_regress.
Kumar Rajeev Rastogi, reviewed by MauMau
For variadic functions (other than VARIADIC ANY), the syntaxes foo(x,y,...)
and foo(VARIADIC ARRAY[x,y,...]) should be considered equivalent, since the
former is converted to the latter at parse time. They have indeed been
equivalent, in all releases before 9.3. However, commit 75b39e790 made an
ill-considered decision to record which syntax had been used in FuncExpr
nodes, and then to make equal() test that in checking node equality ---
which caused the syntaxes to not be seen as equivalent by the planner.
This is the underlying cause of bug #9817 from Dmitry Ryabov.
It might seem that a quick fix would be to make equal() disregard
FuncExpr.funcvariadic, but the same commit made that untenable, because
the field actually *is* semantically significant for some VARIADIC ANY
functions. This patch instead adopts the approach of redefining
funcvariadic (and aggvariadic, in HEAD) as meaning that the last argument
is a variadic array, whether it got that way by parser intervention or was
supplied explicitly by the user. Therefore the value will always be true
for non-ANY variadic functions, restoring the principle of equivalence.
(However, the planner will continue to consider use of VARIADIC as a
meaningful difference for VARIADIC ANY functions, even though some such
functions might disregard it.)
In HEAD, this change lets us simplify the decompilation logic in
ruleutils.c, since the funcvariadic/aggvariadic flag tells directly whether
to print VARIADIC. However, in 9.3 we have to continue to cope with
existing stored rules/views that might contain the previous definition.
Fortunately, this just means no change in ruleutils.c, since its existing
behavior effectively ignores funcvariadic for all cases other than VARIADIC
ANY functions.
In HEAD, bump catversion to reflect the fact that FuncExpr.funcvariadic
changed meanings; this is sort of pro forma, since I don't believe any
built-in views are affected.
Unfortunately, this patch doesn't magically fix everything for affected
9.3 users. After installing 9.3.5, they might need to recreate their
rules/views/indexes containing variadic function calls in order to get
everything consistent with the new definition. As in the cited bug,
the symptom of a problem would be failure to use a nominally matching
index that has a variadic function call in its definition. We'll need
to mention this in the 9.3.5 release notes.
Memory allocation can fail if you run out of memory, and inside a critical
section that will lead to a PANIC. Use conservatively-sized arrays in stack
instead.
There was previously no explicit limit on the number of pages a GiST split
can produce, it was only limited by the number of LWLocks that can be held
simultaneously (100 at the moment). This patch adds an explicit limit of 75
pages. That should be plenty, a typical split shouldn't produce more than
2-3 page halves.
The bug has been there forever, but only backpatch down to 9.1. The code
was changed significantly in 9.1, and it doesn't seem worth the risk or
trouble to adapt this for 9.0 and 8.4.
The code for matching clients to pg_hba.conf lines that specify host names
(instead of IP address ranges) failed to complain if reverse DNS lookup
failed; instead it silently didn't match, so that you might end up getting
a surprising "no pg_hba.conf entry for ..." error, as seen in bug #9518
from Mike Blackwell. Since we don't want to make this a fatal error in
situations where pg_hba.conf contains a mixture of host names and IP
addresses (clients matching one of the numeric entries should not have to
have rDNS data), remember the lookup failure and mention it as DETAIL if
we get to "no pg_hba.conf entry". Apply the same approach to forward-DNS
lookup failures, too, rather than treating them as immediate hard errors.
Along the way, fix a couple of bugs that prevented us from detecting an
rDNS lookup error reliably, and make sure that we make only one rDNS lookup
attempt; formerly, if the lookup attempt failed, the code would try again
for each host name entry in pg_hba.conf. Since more or less the whole
point of this design is to ensure there's only one lookup attempt not one
per entry, the latter point represents a performance bug that seems
sufficient justification for back-patching.
Also, adjust src/port/getaddrinfo.c so that it plays as well as it can
with this code. Which is not all that well, since it does not have actual
support for rDNS lookup, but at least it should return the expected (and
required by spec) error codes so that the main code correctly perceives the
lack of functionality as a lookup failure. It's unlikely that PG is still
being used in production on any machines that require our getaddrinfo.c,
so I'm not excited about working harder than this.
To keep the code in the various branches similar, this includes
back-patching commits c424d0d105 and
1997f34db4 into 9.2 and earlier.
Back-patch to 9.1 where the facility for hostnames in pg_hba.conf was
introduced.
Inserting (in retail) into the new 9.4 format GIN posting tree created much
larger WAL records than in 9.3. The previous strategy to WAL logging was
basically to log the whole page on each change, with the exception of
completely unmodified segments up to the first modified one. That was not
too bad when appending to the end of the page, as only the last segment had
to be WAL-logged, but per Fujii Masao's testing, even that produced 2x the
WAL volume that 9.3 did.
The new strategy is to keep track of changes to the posting lists in a more
fine-grained fashion, and also make the repacking" code smarter to avoid
decoding and re-encoding segments unnecessarily.
Set function parameter names and defaults. Add jsonb versions (which the
code already provided for so the actual new code is trivial). Add jsonb
regression tests and docs.
Bump catalog version (which I apparently forgot to do when jsonb was
committed).
The new format accepts exactly the same data as the json type. However, it is
stored in a format that does not require reparsing the orgiginal text in order
to process it, making it much more suitable for indexing and other operations.
Insignificant whitespace is discarded, and the order of object keys is not
preserved. Neither are duplicate object keys kept - the later value for a given
key is the only one stored.
The new type has all the functions and operators that the json type has,
with the exception of the json generation functions (to_json, json_agg etc.)
and with identical semantics. In addition, there are operator classes for
hash and btree indexing, and two classes for GIN indexing, that have no
equivalent in the json type.
This feature grew out of previous work by Oleg Bartunov and Teodor Sigaev, which
was intended to provide similar facilities to a nested hstore type, but which
in the end proved to have some significant compatibility issues.
Authors: Oleg Bartunov, Teodor Sigaev, Peter Geoghegan and Andrew Dunstan.
Review: Andres Freund
This covers all the SQL-standard trigger types supported for regular
tables; it does not cover constraint triggers. The approach for
acquiring the old row mirrors that for view INSTEAD OF triggers. For
AFTER ROW triggers, we spool the foreign tuples to a tuplestore.
This changes the FDW API contract; when deciding which columns to
populate in the slot returned from data modification callbacks, writable
FDWs will need to check for AFTER ROW triggers in addition to checking
for a RETURNING clause.
In support of the feature addition, refactor the TriggerFlags bits and
the assembly of old tuples in ModifyTable.
Ronan Dunklau, reviewed by KaiGai Kohei; some additional hacking by me.
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Reviewed by Andres Freund.
With this in place, a session blocking behind another one because of
tuple locks will get a context line mentioning the relation name, tuple
TID, and operation being done on tuple. For example:
LOG: process 11367 still waiting for ShareLock on transaction 717 after 1000.108 ms
DETAIL: Process holding the lock: 11366. Wait queue: 11367.
CONTEXT: while updating tuple (0,2) in relation "foo"
STATEMENT: UPDATE foo SET value = 3;
Most usefully, the new line is displayed by log entries due to
log_lock_waits, although of course it will be printed by any other log
message as well.
Author: Christian Kruse, some tweaks by Álvaro Herrera
Reviewed-by: Amit Kapila, Andres Freund, Tom Lane, Robert Haas
It is no longer used, none of the resource managers have multi-record
actions that would make it unsafe to perform a restartpoint.
Also don't allow rm_cleanup to write WAL records, it's also no longer
required. Move the call to rm_cleanup routines to make it more symmetric
with rm_startup.
Splitting a page consists of two separate steps: splitting the child page,
and inserting the downlink for the new right page to the parent. Previously,
we handled the case that you crash in between those steps with a cleanup
routine after the WAL recovery had finished, which finished the incomplete
split. However, that doesn't help if the page split is interrupted but the
database doesn't crash, so that you don't perform WAL recovery. That could
happen for example if you run out of disk space.
Remove the end-of-recovery cleanup step. Instead, when a page is split, the
left page is marked with a new INCOMPLETE_SPLIT flag, and when the downlink
is inserted to the parent, the flag is cleared again. If an insertion sees
a page with the flag set, it knows that the split was interrupted for some
reason, and inserts the missing downlink before proceeding.
I used the same approach to fix GIN and GiST split algorithms earlier. This
was the last WAL cleanup routine, so we could get rid of that whole
machinery now, but I'll leave that for a separate patch.
Reviewed by Peter Geoghegan.
Revise the original decision to expose a uint64-based interface and
use Size everywhere possible. Avoid assuming that MAXIMUM_ALIGNOF is
8, or making any assumption about the relationship between that value
and sizeof(Size). If MAXIMUM_ALIGNOF is bigger, we'll now insert
padding after the length word; if it's smaller, we are now prepared
to read and write the length word in chunks.
Per discussion with Tom Lane.
The new function dsm_detach_all() can be used either by postmaster
children that don't wish to take any risk of accidentally corrupting
shared memory; or by forked children of regular backends with
the same need. This patch also updates the postmaster children that
already do PGSharedMemoryDetach() to do dsm_detach_all() as well.
Per discussion with Tom Lane.
krb_srvname is actually not available anymore as a parameter server-side, since
with gssapi we accept all principals in our keytab. It's still used in libpq for
client side specification.
In passing remove declaration of krb_server_hostname, where all the functionality
was already removed.
Noted by Stephen Frost, though a different solution than his suggestion
In short, we don't allow a page to be deleted if it's the rightmost child
of its parent, but that situation can change after we check for it.
Problem
-------
We check that the page to be deleted is not the rightmost child of its
parent, and then lock its left sibling, the page itself, its right sibling,
and the parent, in that order. However, if the parent page is split after
the check but before acquiring the locks, the target page might become the
rightmost child, if the split happens at the right place. That leads to an
error in vacuum (I reproduced this by setting a breakpoint in debugger):
ERROR: failed to delete rightmost child 41 of block 3 in index "foo_pkey"
We currently re-check that the page is still the rightmost child, and throw
the above error if it's not. We could easily just give up rather than throw
an error, but that approach doesn't scale to half-dead pages. To recap,
although we don't normally allow deleting the rightmost child, if the page
is the *only* child of its parent, we delete the child page and mark the
parent page as half-dead in one atomic operation. But before we do that, we
check that the parent can later be deleted, by checking that it in turn is
not the rightmost child of the grandparent (potentially recursing all the
way up to the root). But the same situation can arise there - the
grandparent can be split while we're not holding the locks. We end up with
a half-dead page that we cannot delete.
To make things worse, the keyspace of the deleted page has already been
transferred to its right sibling. As the README points out, the keyspace at
the grandparent level is "out-of-whack" until the half-dead page is deleted,
and if enough tuples with keys in the transferred keyspace are inserted, the
page might get split and a downlink might be inserted into the grandparent
that is out-of-order. That might not cause any serious problem if it's
transient (as the README ponders), but is surely bad if it stays that way.
Solution
--------
This patch changes the page deletion algorithm to avoid that problem. After
checking that the topmost page in the chain of to-be-deleted pages is not
the rightmost child of its parent, and then deleting the pages from bottom
up, unlink the pages from top to bottom. This way, the intermediate stages
are similar to the intermediate stages in page splitting, and there is no
transient stage where the keyspace is "out-of-whack". The topmost page in
the to-be-deleted chain doesn't have a downlink pointing to it, like a page
split before the downlink has been inserted.
This also allows us to get rid of the cleanup step after WAL recovery, if we
crash during page deletion. The deletion will be continued at next VACUUM,
but the tree is consistent for searches and insertions at every step.
This bug is old, all supported versions are affected, but this patch is too
big to back-patch (and changes the WAL record formats of related records).
We have not heard any reports of the bug from users, so clearly it's not
easy to bump into. Maybe backpatch later, after this has had some field
testing.
Reviewed by Kevin Grittner and Peter Geoghegan.
When a row is updated, and the new tuple version is put on the same page as
the old one, only WAL-log the part of the new tuple that's not identical to
the old. This saves significantly on the amount of WAL that needs to be
written, in the common case that most fields are not modified.
Amit Kapila, with a lot of back and forth with me, Robert Haas, and others.
With the GIN "fast scan" feature, GIN can skip items without fetching all
the keys for them, if it can prove that they don't match regardless of
those keys. So far, it has done the proving by calling the boolean
consistent function with all combinations of TRUE/FALSE for the unfetched
keys, but since that's O(n^2), it becomes unfeasible with more than a few
keys. We can avoid calling consistent with all the combinations, if we can
tell the operator class implementation directly which keys are unknown.
This commit includes a triConsistent function for the built-in array and
tsvector opclasses.
Alexander Korotkov, with some changes by me.
In order for this to work, walsenders need the optional ability to
connect to a database, so the "replication" keyword now allows true
or false, for backward-compatibility, and the new value "database"
(which causes the "dbname" parameter to be respected).
walsender needs to loop not only when idle but also when sending
decoded data to the user and when waiting for more xlog data to decode.
This means that there are now three separate loops inside walsender.c;
although some refactoring has been done here, this is still a bit ugly.
Andres Freund, with contributions from Álvaro Herrera, and further
review by me.
If a postmaster child invokes fork() and then calls on_exit_reset, that
should be sufficient to let it exit() without breaking anything, but
dynamic shared memory broke that by not updating on_exit_reset() to
discard callbacks registered with dynamic shared memory segments.
Per investigation of a complaint from Tom Lane.
In b89e151054 I had assumed it was ok to use anonymous unions as
struct members, but while a longstanding extension in many compilers,
it's only been standardized in C11.
To fix, remove one of the anonymous unions which tried to hide some
implementation specific enum values and give the other a name. The
latter unfortunately requires changes in output plugins, but since the
feature has only been added a few days ago...
Andres Freund
