Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
With the GIN "fast scan" feature, GIN can skip items without fetching all
the keys for them, if it can prove that they don't match regardless of
those keys. So far, it has done the proving by calling the boolean
consistent function with all combinations of TRUE/FALSE for the unfetched
keys, but since that's O(n^2), it becomes unfeasible with more than a few
keys. We can avoid calling consistent with all the combinations, if we can
tell the operator class implementation directly which keys are unknown.
This commit includes a triConsistent function for the built-in array and
tsvector opclasses.
Alexander Korotkov, with some changes by me.
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
The GIN code has absolutely no business exporting GIN-specific functions
with names as generic as compareItemPointers() or newScanKey(); that's
just trouble waiting to happen. I got annoyed about this again just now
and decided to fix it. This commit ensures that all global symbols
defined in access/gin/ have names including "gin" or "Gin". There were a
couple of cases, like names involving "PostingItem", where arguably the
names were already sufficiently nongeneric; but I figured as long as I was
risking creating merge problems for unapplied GIN patches I might as well
impose a uniform policy.
I didn't touch any static symbol names. There might be some places
where it'd be appropriate to rename some static functions to match
siblings that are exported, but I'll leave that for another time.
The better estimate requires more statistics than we previously stored:
in particular, counts of "entry" versus "data" pages within the index,
as well as knowledge of the number of distinct key values. We collect
this information during initial index build and update it during VACUUM,
storing the info in new fields on the index metapage. No initdb is
required because these fields will read as zeroes in a pre-existing
index, and the new gincostestimate code is coded to behave (reasonably)
sanely if they are zeroes.
Teodor Sigaev, reviewed by Jan Urbanski, Tom Lane, and Itagaki Takahiro.
Although the key-combining code claimed to work correctly if its input
contained both lossy and exact pointers for a single page in a single TID
stream, in fact this did not work, and could not work without pretty
fundamental redesign. Modify keyGetItem so that it will not return such a
stream, by handling lossy-pointer cases a bit more explicitly than we did
before.
Per followup investigation of a gripe from Artur Dabrowski.
An example of a query that failed given his data set is
select count(*) from search_tab where
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'ee:* | dd:*')) and
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'aa:*'));
Back-patch to 8.4 where the lossy pointer code was introduced.
struct representing a tree entry, rather than being a separately allocated
piece of storage. This API is at least as clean as the old one (if not
more so --- there were some bizarre choices in there) and it permits a
very substantial memory savings, on the order of 2X in ginbulk.c's usage.
Also, fix minor memory leaks in code called by ginEntryInsert, in
particular in ginInsertValue and entryFillRoot, as well as ginEntryInsert
itself. These leaks resulted in the GIN index build context continuing
to bloat even after we'd filled it to maintenance_work_mem and started
to dump data out to the index.
In combination these fixes restore the GIN index build code to honoring
the maintenance_work_mem limit about as well as it did in 8.4. Speed
seems on par with 8.4 too, maybe even a bit faster, for a non-pathological
case in which HEAD was formerly slower.
Back-patch to 9.0 so we don't have a performance regression from 8.4.
routines to make them behave better in the presence of "lossy" index pointers.
The previous coding was outright incorrect for some cases, as recently
reported by Artur Dabrowski: scanGetItem would fail to return index entries in
cases where one index key had multiple exact pointers on the same page as
another key had a lossy pointer. Also, keyGetItem was extremely inefficient
for cases where a single index key generates multiple "entry" streams, such as
an @@ operator with a multiple-clause tsquery. The presence of a lossy page
pointer in any one stream defeated its ability to use the opclass
consistentFn, resulting in probing many heap pages that didn't really need to
be visited. In Artur's example case, a query like
WHERE tsvector @@ to_tsquery('a & b')
was about 50X slower than the theoretically equivalent
WHERE tsvector @@ to_tsquery('a') AND tsvector @@ to_tsquery('b')
The way that I chose to fix this was to have GIN call the consistentFn
twice with both TRUE and FALSE values for the in-doubt entry stream,
returning a hit if either call produces TRUE, but not if they both return
FALSE. The code handles this for the case of a single in-doubt entry stream,
but punts (falling back to the stupid behavior) if there's more than one lossy
reference to the same page. The idea could be scaled up to deal with multiple
lossy references, but I think that would probably be wasted complexity. At
least to judge by Artur's example, such cases don't occur often enough to be
worth trying to optimize.
Back-patch to 8.4. 8.3 did not have lossy GIN index pointers, so not
subject to these problems.
several places, but for now only GIN uses it during index creation.
Using self-balanced tree greatly speeds up index creation in corner cases
with preordered data.
tuple size limit. Improve the error message for index-tuple-too-large
so that it includes the actual size, the limit, and the index name.
Sync with the btree occurrences of the same error.
Back-patch to 8.4 because it appears that the out-of-sync problem
is occurring in the field.
Teodor and Tom
is supposed to remove duplicate heap TIDs, we have to be sure to reduce the
tuple size and posting-item count accordingly in addItemPointersToTuple().
Failing to do so resulted in the effective injection of garbage TIDs into the
index contents, ie, whatever happened to be in the memory palloc'd for the
new tuple. I'm not sure that this fully explains the index corruption
reported by Tatsuo Ishii, but the test case I'm using no longer fails.
should use GinItemPointerGetBlockNumber/GinItemPointerGetOffsetNumber,
not ItemPointerGetBlockNumber/ItemPointerGetOffsetNumber, because the latter
will Assert() on ip_posid == 0, ie a "Min" pointer. (Thus, ItemPointerIsMin
has never worked at all, but it seems unused at present.) I'm not certain
that the case can occur in normal functioning, but it's blowing up on me
while investigating Tatsuo-san's data corruption problem. In any case it
seems like a problem waiting to bite someone.
Back-patch just in case this really is a problem for somebody in the field.
method to pass extra data to the consistent() and comparePartial() methods.
This is the core infrastructure needed to support the soon-to-appear
contrib/btree_gin module. The APIs are still upward compatible with the
definitions used in 8.3 and before, although *not* with the previous 8.4devel
function definitions.
catversion bump for changes in pg_proc entries (although these are just
cosmetic, since GIN doesn't actually look at the function signature before
calling it...)
Teodor Sigaev and Oleg Bartunov
them from degrading badly when the input is sorted or nearly so. In this
scenario the tree is unbalanced to the point of becoming a mere linked list,
so insertions become O(N^2). The easiest and most safely back-patchable
solution is to stop growing the tree sooner, ie limit the growth of N. We
might later consider a rebalancing tree algorithm, but it's not clear that
the benefit would be worth the cost and complexity. Per report from Sergey
Burladyan and an earlier complaint from Heikki.
Back-patch to 8.2; older versions didn't have GIN indexes.
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
bitmap. This is extracted from Greg Stark's posix_fadvise patch; it seems
worth committing separately, since it's potentially useful independently of
posix_fadvise.
thereby forestalling any problems with alignment of the data structure placed
there. Since SizeOfPageHeaderData is maxalign'd anyway in 8.3 and HEAD, this
does not actually change anything right now, but it is foreseeable that the
header size will change again someday. I had to fix a couple of places that
were assuming that the content offset is just SizeOfPageHeaderData rather than
MAXALIGN(SizeOfPageHeaderData). Per discussion of Zdenek's page-macros patch.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
<craig@postnewspapers.com.au>.
It was my mistake, I missed limitation of number of held locks, now GIN doesn't
use continiuous locks, but still hold buffers pinned to prevent interference
with vacuum's deletion algorithm.
Backpatch is needed.
indexscan always occurs in one call, and the results are returned in a
TIDBitmap instead of a limited-size array of TIDs. This should improve
speed a little by reducing AM entry/exit overhead, and it is necessary
infrastructure if we are ever to support bitmap indexes.
In an only slightly related change, add support for TIDBitmaps to preserve
(somewhat lossily) the knowledge that particular TIDs reported by an index
need to have their quals rechecked when the heap is visited. This facility
is not really used yet; we'll need to extend the forced-recheck feature to
plain indexscans before it's useful, and that hasn't been coded yet.
The intent is to use it to clean up 8.3's horrid @@@ kluge for text search
with weighted queries. There might be other uses in future, but that one
alone is sufficient reason.
Heikki Linnakangas, with some adjustments by me.
