DST law changes in Ittoqqortoormiit, Greenland (America/Scoresbysund),
Kazakhstan (Asia/Almaty and Asia/Qostanay) and Palestine; as well as
updates for the Antarctic stations Casey and Vostok.
Historical corrections for Vietnam, Toronto, and Miquelon.
Further fallout from commit 6ee26c6a4b. To keep code in sync and avoid
issues on older releases with different package names, simply use the
unqualified name like many other places in our code.
The latest buildfarm failures show that after the insert, we don't
actually wait long enough for WAL summarization to catch up, apparently
because the on disk state gets updated before the in-memory state, and
so by checking the on disk state to see whether we're caught up and then
the in-memory state to see where exactly how far we've progressed, we
can, if unlucky, derive an older value of summarized_lsn, messing up
the rest of the test.
Attempt to fix this by using pg_available_wal_summaries() everywhere in
the test and pg_get_wal_summarizer_state() nowhere.
Per buildfarm.
Role option management was changed in Postgres 16. This patch improves
the docs around these changes, including CREATE ROLE's INHERIT option,
inheritance handling, and grant's ability to change role options.
Discussion: https://postgr.es/m/Zab9GiV63EENDcWG@momjian.us
Co-authored-by: David G. Johnston
Backpatch-through: 16
The Parameters subsection had an extra TRIGGER in the grammar
for DISABLE/ENABLE which is incorrect. Backpatch down to all
supported versions since it's been like this all along.
Discussion: https://postgr.es/m/0AFB171E-7E78-4A90-A140-46AB270212CA@yesql.se
Backpatch-through: v12
The openssl command for displaying the DN of a client certificate was
using --subject and not the single-dash option -subject. While recent
versions of openssl handles double dash options, earlier does not so
fix by using just -subject (which is per the openssl documentation).
Backpatch to v14 where this was introduced.
Reported-by: konkove@gmail.com
Discussion: https://postgr.es/m/170672168899.666.10442618407194498217@wrigleys.postgresql.org
Backpatch-through: v14
This impacts the statistics retrieved in transactions for the following
views when updating the value of stats_fetch_consistency, leading to
behaviors contrary to what is documented since 605994651b as an update
of this parameter should discard all statistics snapshot data:
- pg_stat_archiver
- pg_stat_bgwriter
- pg_stat_checkpointer
- pg_stat_io
- pg_stat_slru
- pg_stat_wal
For example, updating stats_fetch_consistency from "snapshot" to "cache"
in a transaction did not re-fetch any fresh data, using data cached from
the time when "snapshot" was in use.
Author: Shinya Kato
Discussion: https://postgr.es/m/d77fc5190d4dbe1738d77231488e768b@oss.nttdata.com
Backpatch-through: 15
When building libpq there is a check to ensure that we're not
linking against code that calls exit(). This check is using a
heuristic grep with exclusions for known false positives. The
Threadsanitizer library instrumentation for function exits is
named such that it triggers the check, so add an exclusion.
This fix is only applied to the Makefile since the meson build
files don't yet have this check. Adding the check to meson is
outside the scope of this patch though.
Reported-by: Roman Lozko <lozko.roma@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAEhC_BmNGKgj2wKArH2EAU11BsaHYgLnrRFJGRm5Vs8WJzyiQA@mail.gmail.com
When building a MergeAppendPath which has child paths that are not
sorted correctly for the MergeAppend's sort order, we apply the cost of
sorting those paths to the MergeAppendPath costs.
Here we fix a bug where the number of tuples specified that needed to be
sorted was effectively pg_class.reltuples rather than the number of
expected row in the subpath. This effectively penalizes MergeAppend
plans any time any filter is present on the MergeAppend subpath as the
sort cost added is to sort all tuples in the table rather than just the
ones expected the path to return.
This did not affect UNION ALL type queries as the RelOptInfo tuples is
set from the subquery's path rows. It does affect MergeAppends uses for
inheritance and partitioned tables.
This is a long-standing bug introduced when MergeAppend was first added
in 11cad29c9. No backpatch as this could result in plan changes.
Author: Alexander Kuzmenkov
Reviewed-by: Ashutosh Bapat, Aleksander Alekseev, David Rowley
Discussion: https://postgr.es/m/CALzhyqyhoXQDR-Usd_0HeWk%3DuqNLzoVeT8KhRoo%3DpV_KzgO3QQ%40mail.gmail.com
Make the new tuple larger than the old one so that it, hopefully, won't
manage to squeeze into leftover freespace on the same page. The test
is trying to verify that the UPDATE touches 2 pages, but if a HOT
update happens, then it doesn't.
Per buildfarm.
Analysis of buildfarm results showed that the code that was intended
to wait for the inserts performed by this test to complete did not
actually do so. Try to make that logic more robust.
Improve error checking elsewhere in the script, too, so that we
don't miss things like poll_query_until failing.
Along the way, fix a bit of pgindent damage introduced by commit
5ddf997347, which aimed to help us
debug the failures that this commit is trying to fix. It's making
the buildfarm sad.
Discussion: http://postgr.es/m/CA+TgmobWFb8NqyfC31YnKAbZiXf9tLuwmyuvx=iYMXMniPQ4nw@mail.gmail.com
This was already documented in the CREATE INDEX reference, but not in
the introductory "Data Definition" chapter. Also, document that the
index that implements a constraint has the same name as the
constraint.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxFG682tYcP9aH_F-jrqq5End8MHZR77zcp1%3DDUrEsSu1Q%40mail.gmail.com
After calling smgropen(), it was not clear how long you could continue
to use the result, because various code paths including cache
invalidation could call smgrclose(), which freed the memory.
Guarantee that the object won't be destroyed until the end of the
current transaction, or in recovery, the commit/abort record that
destroys the underlying storage.
smgrclose() is now just an alias for smgrrelease(). It closes files
and forgets all state except the rlocator, but keeps the SMgrRelation
object valid.
A new smgrdestroy() function is used by rare places that know there
should be no other references to the SMgrRelation.
The short version:
* smgrclose() is now just an alias for smgrrelease(). It releases
resources, but doesn't destroy until EOX
* smgrdestroy() now frees memory, and should rarely be used.
Existing code should be unaffected, but it is now possible for code that
has an SMgrRelation object to use it repeatedly during a transaction as
long as the storage hasn't been physically dropped. Such code would
normally hold a lock on the relation.
This also replaces the "ownership" mechanism of SMgrRelations with a
pin counter. An SMgrRelation can now be "pinned", which prevents it
from being destroyed at end of transaction. There can be multiple pins
on the same SMgrRelation. In practice, the pin mechanism is only used
by the relcache, so there cannot be more than one pin on the same
SMgrRelation. Except with swap_relation_files XXX
Author: Thomas Munro, Heikki Linnakangas
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGJ8NTvqLHz6dqbQnt2c8XCki4r2QvXjBQcXpVwxTY_pvA@mail.gmail.com
Before the advent of PROCSIGNAL_BARRIER_SMGRRELEASE, we didn't have a
comprehensive way to deal with Windows file handles that get in the way
of unlinking directories. We had smgrcloseall() calls in a few places
to try to mitigate.
It's still a good idea for bgwriter and checkpointer to do that once per
checkpoint so they don't accumulate unbounded SMgrRelation objects, but
there is no longer any reason to close them at other random places such
as the error path, and the explanation as given in the comments is now
obsolete.
Author: Thomas Munro
Reviewed-by: Heikki Linnakangas, Robert Haas
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGJ8NTvqLHz6dqbQnt2c8XCki4r2QvXjBQcXpVwxTY_pvA@mail.gmail.com
Similar to what was done in 5543677ec for non-parallel DISTINCT, apply
the same optimization when the distinct_pathkeys are empty for the
partial paths too.
This can be faster than the non-parallel version when the first row
matching the WHERE clause of the query takes a while to find. Parallel
workers could speed that process up considerably.
Author: Richard Guo
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/CAMbWs49JC0qvfUbzs-TVzgMpSSBiMJ_6sN=BaA9iohBgYkr=LA@mail.gmail.com
This commit addresses a set of issues when changing token type mappings
in a text search configuration when using duplicated token names:
- ADD MAPPING would fail on insertion because of a constraint failure
after inserting the same mapping.
- ALTER MAPPING with an "overridden" configuration failed with "tuple
already updated by self" when the token mappings are removed.
- DROP MAPPING failed with "tuple already updated by self", like
previously, but in a different code path.
The code is refactored so the token names (with their numbers) are
handled as a List with unique members rather than an array with numbers,
ensuring that no duplicates mess up with the catalog inserts, updates
and deletes. The list is generated by getTokenTypes(), with the same
error handling as previously while duplicated tokens are discarded from
the list used to work on the catalogs.
Regression tests are expanded to cover much more ground for the cases
fixed by this commit, as there was no coverage for the code touched in
this commit. A bit more is done regarding the fact that a token name
not supported by a configuration's parser should result in an error even
if IF EXISTS is used in a DROP MAPPING clause. This is implied in the
code but there was no coverage for that, and it was very easy to miss.
These issues exist since at least their introduction in core with
140d4ebcb4, so backpatch all the way down.
Reported-by: Alexander Lakhin
Author: Tender Wang, Michael Paquier
Discussion: https://postgr.es/m/18310-1eb233c5908189c8@postgresql.org
Backpatch-through: 12
File::Find converts backslashes to slashes in the newer Perl versions.
See: 414f14df98
So, do the same conversion for Windows before comparing paths. To
support all Perl versions, always convert them on Windows regardless of
the Perl's version.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Backpatch to all live branches
Here we consolidate the generation of partial sort and partial incremental
sort paths in a similar way to what was done in 4a29eabd1. Since the cost
penalty for incremental sort was removed by that commit, there's no
point in creating a sort path on the cheapest partial path if an
incremental sort could be done instead.
This has the added benefit of reducing the amount of code required to
build these paths.
Author: Richard Guo
Reviewed-by: Etsuro Fujita, Shubham Khanna, David Rowley
Discussion: https://postgr.es/m/CAMbWs49PaKxBZU9cN7k3DKB7id+YfGfOfS9H_Fo5tkqPMt=fDg@mail.gmail.com
predicate.c has been using SerialSLRULock (the control lock for its SLRU
structure) to coordinate access to SerialControlData, another of its
numerous shared memory structures; this is unnecessary and confuses
further SLRU scalability work. Create a separate LWLock to cover
SerialControlData.
Extracted from a larger patch from the same author, and some additional
changes by Álvaro.
Author: Dilip Kumar <dilip.kumar@enterprisedb.com>
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
This commit introduces a new subscription option named 'failover', which
provides users with the ability to set the failover property of the
replication slot on the publisher when creating or altering a
subscription.
This uses the replication commands introduced by commit 7329240437 to
enable the failover option for a logical replication slot.
If the failover option is set to true, the associated replication slots
(i.e. the main slot and the table sync slots) in the upstream database are
enabled to be synchronized to the standbys. Note that the capability to
sync the replication slots will be added in subsequent commits.
Thanks to Masahiko Sawada for the design inputs.
Author: Shveta Malik, Hou Zhijie, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
The code copying the PGP block into the temp buffer failed to
account for the extra 2 bytes in the buffer which are needed
for the prefix. If the block was oversized, subsequent checks
of the prefix would have exceeded the buffer size. Since the
block sizes are hardcoded in the list of supported ciphers it
can be verified that there is no live bug here. Backpatch all
the way for consistency though, as this bug is old.
Author: Mikhail Gribkov <youzhick@gmail.com>
Discussion: https://postgr.es/m/CAMEv5_uWvcMCMdRFDsJLz2Q8g16HEa9xWyfrkr+FYMMFJhawOw@mail.gmail.com
Backpatch-through: v12
Previously this hash table was built during executor startup. This
could cause long delays in EXPLAIN (without ANALYZE) when the planner
opts to use a large Memoize hash table.
No backpatch for now due to lack of complaints.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvoJktJ5XL=Kjh2a2TFr64R-7eQZV-+jcJrUwoES2GLiWg@mail.gmail.com
We seem to have only documented a foreign key can reference the columns of
a primary key or unique constraint. Here we adjust the documentation
to mention columns in a non-partial unique index can be mentioned too.
The header comment for transformFkeyCheckAttrs() also didn't mention
unique indexes, so fix that too. In passing make that header comment
reflect reality in the various other aspects where it deviated from it.
Bug: 18295
Reported-by: Gilles PARC
Author: Laurenz Albe, David Rowley
Discussion: https://www.postgresql.org/message-id/18295-0ed0fac5c9f7b17b%40postgresql.org
Backpatch-through: 12
This function requires simd.h, which is a rather large dependency
for a widely-used header file like pg_wchar.h. Furthermore, there
is a report of a third-party tool that is struggling to use
pg_wchar.h due to its dependence on simd.h (presumably because
simd.h uses several intrinsics). Moving the function to the much
less popular ascii.h resolves these issues for now.
This commit is back-patched for the benefit of the aforementioned
third-party tool. The simd.h dependency was only added in v16,
but we've opted to back-patch to v15 so that is_valid_ascii() lives
in the same file for all versions where it exists. This could
break existing third-party code that uses the function, but we
couldn't find any examples of such code. It should be possible to
fix any code that this commit breaks by including ascii.h in the
file that uses is_valid_ascii().
Author: Jubilee Young
Reviewed-by: Tom Lane, John Naylor, Andres Freund, Eric Ridge
Discussion: https://postgr.es/m/CAPNHn3oKJJxMsYq%2BqLYzVJOFrUcOr4OF1EC-KtFT-qh8nOOOtQ%40mail.gmail.com
Backpatch-through: 15
libxml2 changed the required signature of error handler callbacks
to make the passed xmlError struct "const". This is causing build
failures on buildfarm member caiman, and no doubt will start showing
up in the field quite soon. Add a version check to adjust the
declaration of xml_errorHandler() according to LIBXML_VERSION.
2.12.x also produces deprecation warnings for contrib/xml2/xpath.c's
assignment to xmlLoadExtDtdDefaultValue. I see no good reason for
that to still be there, seeing that we disabled external DTDs (at a
lower level) years ago for security reasons. Let's just remove it.
Back-patch to all supported branches, since they might all get built
with newer libxml2 once it gets a bit more popular. (The back
branches produce another deprecation warning about xpath.c's use of
xmlSubstituteEntitiesDefault(). We ought to consider whether to
back-patch all or part of commit 65c5864d7 to silence that. It's
less urgent though, since it won't break the buildfarm.)
Discussion: https://postgr.es/m/1389505.1706382262@sss.pgh.pa.us
This adds a new "Memory:" line under the "Planning:" group (which
currently only has "Buffers:") when the MEMORY option is specified.
In order to make the reporting reasonably accurate, we create a separate
memory context for planner activities, to be used only when this option
is given. The total amount of memory allocated by that context is
reported as "allocated"; we subtract memory in the context's freelists
from that and report that result as "used". We use
MemoryContextStatsInternal() to obtain the quantities.
The code structure to show buffer usage during planning was not in
amazing shape, so I (Álvaro) modified the patch a bit to clean that up
in passing.
Author: Ashutosh Bapat
Reviewed-by: David Rowley, Andrey Lepikhov, Jian He, Andy Fan
Discussion: https://www.postgresql.org/message-id/CAExHW5sZA=5LJ_ZPpRO-w09ck8z9p7eaYAqq3Ks9GDfhrxeWBw@mail.gmail.com
ginFinishSplit() expects the caller to hold an exclusive lock on the
buffer, but when finishing an earlier "leftover" incomplete split of
an internal page, the caller held a shared lock. That caused an
assertion failure in MarkBufferDirty(). Without assertions, it could
lead to corruption if two backends tried to complete the split at the
same time.
On master, add a test case using the new injection point facility.
Report and analysis by Fei Changhong. Backpatch the fix to all
supported versions.
Reviewed-by: Fei Changhong, Michael Paquier
Discussion: https://www.postgresql.org/message-id/tencent_A3CE810F59132D8E230475A5F0F7A08C8307@qq.com
In follow up commits we'll add more functions related to query
cancellations. This groups those all together instead of mixing them
with the other functions in fe-connect.c.
The formerly static parse_int_param() function had to be exported to
other libpq users, so it's been renamed pqParseIntParam() and moved to a
more reasonable place within fe-connect.c (rather than randomly between
various keepalive-related routines).
Author: Jelte Fennema-Nio <jelte.fennema@microsoft.com>
Discussion: https://postgr.es/m/AM5PR83MB0178D3B31CA1B6EC4A8ECC42F7529@AM5PR83MB0178.EURPRD83.prod.outlook.com
This function served to support having prebuilt files in the source
tree for vpath builds. This is no longer possible (since
721856ff24); all built files are now always in the build tree. The
invocations of this function are no longer required.
This commit implements a new replication command called
ALTER_REPLICATION_SLOT and a corresponding walreceiver API function named
walrcv_alter_slot. Additionally, the CREATE_REPLICATION_SLOT command has
been extended to support the failover option.
These new additions allow the modification of the failover property of a
replication slot on the publisher. A subsequent commit will make use of
these commands in subscription commands and will add the tests as well to
cover the functionality added/changed by this commit.
Author: Hou Zhijie, Shveta Malik
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda, Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Since commit a4ccc1cef, the 'node' and 'alloc_tuple_size' fields of
the ReorderBufferTupleBuf structure are no longer used. This leaves
only the 'tuple' field in the structure. Since keeping a single-field
structure makes little sense, the ReorderBufferTupleBuf is removed
entirely. The code is refactored accordingly.
No back-patching since these are ABI changes in an exposed structure
and functions, and there would be some risk of breaking extensions.
Author: Aleksander Alekseev
Reviewed-by: Amit Kapila, Masahiko Sawada, Reid Thompson
Discussion: https://postgr.es/m/CAD21AoCvnuxiXXfRecp7g9+CeC35POQfhuQeJFr7_9u_Q5jc_Q@mail.gmail.com
This commit fixes failures with "tuple already updated by self" when
listing twice the same role and in a DROP ROLE query.
This is an oversight in 6566133c5f, that has introduced a two-phase
logic in DropRole() where dependencies of all the roles to drop are
removed in a first phase, with the roles themselves removed from
pg_authid in a second phase.
The code is simplified to not rely on a List of ObjectAddress built in
the first phase used to remove the pg_authid entries in the second
phase, switching to a list of OIDs. Duplicated OIDs can be simply
avoided in the first phase thanks to that. Using ObjectAddress was not
necessary for the roles as they are not used for anything specific to
dependency.c, building all the ObjectAddress in the List with
AuthIdRelationId as class ID.
In 15 and older versions, where a single phase is used, DROP ROLE with
duplicated role names would fail on "role \"blah\" does not exist" for
the second entry after the CCI() done by the first deletion. This is
not really incorrect, but it does not seem worth changing based on a
lack of complaints.
Reported-by: Alexander Lakhin
Reviewed-by: Tender Wang
Discussion: https://postgr.es/m/18310-1eb233c5908189c8@postgresql.org
Backpatch-through: 16
Both drongo and fairywren seem not to like a new regression test added
by 2cca95e17. These machines show a different number of actual rows in
the EXPLAIN ANALYZE output. Since the number of actual rows is divided by
the number of loops, I suspect this might be due to some platform
dependant rounding behavior as the total row count is 5 and the number of
loops is 2. drongo and fairywren seem to be calculating that 5.0 / 2.0 is
3, whereas most other machines think the answer is 2.
Here we tweak the test query's WHERE clause so it's 4.0 / 2.0 instead.
There shouldn't be too much wiggle room for platform dependant-behavior to
be a factor with those numbers.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/1035225.1706301718%40sss.pgh.pa.us
Oversight in 2489d76c4. Preliminary analysis suggests that the
problem may be unreachable --- but if we did have instances of
the same column with different varnullingrels, we'd surely need
to treat them as different Params.
Discussion: https://postgr.es/m/412552.1706203379@sss.pgh.pa.us
We perform addition of the days field of an interval via
arithmetic on the Julian-date representation of the timestamp's date.
This step is subject to int32 overflow, and we also should not let
the Julian date become very negative, for fear of weird results from
j2date. (In the timestamptz case, allow a Julian date of -1 to pass,
since it might convert back to zero after timezone rotation.)
The additions of the months and microseconds fields could also
overflow, of course. However, I believe we need no additional
checks there; the existing range checks should catch such cases.
The difficulty here is that j2date's magic modular arithmetic could
produce something that looks like it's in-range.
Per bug #18313 from Christian Maurer. This has been wrong for
a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/18313-64d2c8952d81e84b@postgresql.org
The tests in 002_blocks.pl are failing in the buildfarm from time to
time, but we don't know how to reproduce the failure elsewhere. The
most obvious explanation seems to be the unexpected disappearance of a
WAL summary file, so bump up the logging level in
RemoveWalSummaryIfOlderThan to try to help us spot such problems, and
print the cutoff time in addition to the removed filename. Also
adjust 002_blocks.pl to dump out a directory listing of the relevant
directory at various points.
This patch should be reverted once we sort out what's happening here.
Patch by me, reviewed by Nathan Bossart, who also reported the issue.
Discussion: http://postgr.es/m/20240124170846.GA2643050@nathanxps13
lazy_scan_prune() and lazy_scan_noprune() update the freespace map
with identical conditions; combine them. This consolidation is easier
now that cb970240f1 moved visibility map
updates into lazy_scan_prune().
While combining the FSM updates, simplify the logic for calling
lazy_scan_new_or_empty() and lazy_scan_noprune().
Also update a few comemnts in this part of the code to make them,
hopefully, clearer.
Melanie Plageman and Robert Haas
Discussion: https://postgr.es/m/CA%2BTgmoaLTvipm%3Dxx4rJLr07m908PCu%3DQH3uCjD1UOn8YaEuO2g%40mail.gmail.com
- Separate function to merge a child attribute into matching inherited
attribute: The logic to merge a child attribute into matching
inherited attribute in MergeAttribute() is only applicable to
regular inheritance child. The code is isolated and coherent enough
that it can be separated into a function of its own.
- Separate function to merge next parent attribute: Partitions inherit
from only a single parent. The logic to merge an attribute from the
next parent into the corresponding attribute inherited from previous
parents in MergeAttribute() is only applicable to regular
inheritance children. This code is isolated enough that it can be
separate into a function by itself.
These separations makes MergeAttribute() more readable by making it
easier to follow high level logic without getting entangled into
details.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
This commit changes the order of reindex on a relation so as a toast
relation is processed before its main relation.
The original order, where a rebuild was first done for the indexes on
the main table, could be a problem in the event of a corruption of a
toast index, because, as scans of a toast index may be required to
rebuild the indexes on the main relation, this could lead to failures
with REINDEX TABLE without being able to fix anything.
Rebuilding corrupted toast indexes before this change was possible but
troublesome, as it was necessary to issue a REINDEX on the toast
relation first, followed by a REINDEX on the main relation. Changing
the order of these operations should make things easier when rebuilding
corrupted indexes, as toast indexes would be rebuilt before they are
used for the indexes on the main relation.
Per request from Richard Vesely.
Author: Gurjeet Singh
Reviewed-by: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/18016-2bd9b549b1fe49b3@postgresql.org
It was possible when determining the cache keys for a Memoize path that
if the same expr appeared twice in the parameterized path's ppi_clauses
and/or in the Nested Loop's inner relation's lateral_vars. If this
happened the Memoize node's cache keys would contain duplicates. This
isn't a problem for correctness, all it means is that the cache lookups
will be suboptimal due to having redundant work to do on every hash table
lookup and insert.
Here we adjust paraminfo_get_equal_hashops() to look for duplicates and
ignore them when we find them.
Author: David Rowley
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/422277.1706207562%40sss.pgh.pa.us
Tom Lane
Andrew Dunstan
Robert Haas
Bruce Momjian
Daniel Gustafsson
Michael Paquier
Alvaro Herrera
David Rowley
Peter Eisentraut
Heikki Linnakangas
Amit Kapila
Nathan Bossart
Masahiko Sawada