POSIX specifies that jrand48() returns a signed 32-bit value (in the
range [-2^31, 2^31)), but our code was returning an unsigned 32-bit
value (in the range [0, 2^32)). This doesn't actually matter to any
existing call site, because they all cast the "long" result to int32
or uint32; but it will doubtless bite somebody in the future.
To fix, cast the arithmetic result to int32 explicitly before the
compiler widens it to long (if widening is needed).
While at it, upgrade this file's far-short-of-project-style comments.
Had there been some peer pressure to document pg_jrand48() properly,
maybe this thinko wouldn't have gotten committed to begin with.
Backpatch to v10 where pg_jrand48() was added, just in case somebody
back-patches a fix that uses it and depends on the standard behavior.
Discussion: https://postgr.es/m/17235.1545951602@sss.pgh.pa.us
Previously, we used the platform's NL_ARGMAX if any, otherwise 16.
The trouble with this is that the platform value is hugely variable,
ranging from the POSIX-minimum 9 to as much as 64K on recent FreeBSD.
Values of more than a dozen or two have no practical use and slow down
the initialization of the argtypes array. Worse, they cause snprintf.c
to consume far more stack space than was the design intention, possibly
resulting in stack-overflow crashes.
Standardize on 31, which is comfortably more than we need (it looks like
no existing translatable message has more than about 10 parameters).
I chose that, not 32, to make the array sizes powers of 2, for some
possible small gain in speed of the memset.
The lack of reported crashes suggests that the set of platforms we
use snprintf.c on (in released branches) may have no overlap with
the set where NL_ARGMAX has unreasonably large values. But that's
not entirely clear, so back-patch to all supported branches.
Per report from Mateusz Guzik (via Thomas Munro).
Discussion: https://postgr.es/m/CAEepm=3VF=PUp2f8gU8fgZB22yPE_KBS0+e1AHAtQ=09schTHg@mail.gmail.com
C99 says that the result should be the number of bytes that would have
been emitted given a large enough buffer, not the number we actually
were able to put in the buffer. It's time to make our substitute
implementation comply with that. Not doing so results in inefficiency
in buffer-enlargement cases, and also poses a portability hazard for
third-party code that might expect C99-compliant snprintf behavior
within Postgres.
In passing, remove useless tests for str == NULL; neither C99 nor
predecessor standards ever allowed that except when count == 0,
so I see no reason to expend cycles on making that a non-crash case
for this implementation. Also, don't waste a byte in pg_vfprintf's
local I/O buffer; this might have performance benefits by allowing
aligned writes during flushbuffer calls.
Back-patch of commit 805889d7d. There was some concern about this
possibly breaking code that assumes pre-C99 behavior, but there is
much more risk (and reality, in our own code) of code that assumes
C99 behavior and hence fails to detect buffer overrun without this.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
Fix a small number of places that were testing the result of snprintf()
but doing so incorrectly. The right test for buffer overrun, per C99,
is "result >= bufsize" not "result > bufsize". Some places were also
checking for failure with "result == -1", but the standard only says
that a negative value is delivered on failure.
(Note that this only makes these places correct if snprintf() delivers
C99-compliant results. But at least now these places are consistent
with all the other places where we assume that.)
Also, make psql_start_test() and isolation_start_test() check for
buffer overrun while constructing their shell commands. There seems
like a higher risk of overrun, with more severe consequences, here
than there is for the individual file paths that are made elsewhere
in the same functions, so this seemed like a worthwhile change.
Also fix guc.c's do_serialize() to initialize errno = 0 before
calling vsnprintf. In principle, this should be unnecessary because
vsnprintf should have set errno if it returns a failure indication ...
but the other two places this coding pattern is cribbed from don't
assume that, so let's be consistent.
These errors are all very old, so back-patch as appropriate. I think
that only the shell command overrun cases are even theoretically
reachable in practice, but there's not much point in erroneous error
checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
When built using OpenSSL, pg_strong_random() uses RAND_bytes() to
generate the random number. On very rare occasions that can fail, if
its PRNG has not been seeded with enough data. Additionally, once it
does fail, all subsequent calls will also fail until more seed data is
added. Since this is required during backend startup, this can result
in all new backends failing to start until a postmaster restart.
Guard against that by checking the state of OpenSSL's PRNG using
RAND_status(), and if necessary (very rarely), seeding it using
RAND_poll().
Back-patch to v10, where pg_strong_random() was introduced.
Dean Rasheed and Michael Paquier.
Discussion: https://postgr.es/m/CAEZATCXMtxbzSAvyKKk5uCRf9pNt4UV%2BF_5v%3DgLfJUuPxU4Ytg%40mail.gmail.com
If echo = false, simple_prompt() is supposed to prevent echoing the
input (for password input). However, the Windows implementation applied
the mode change to STD_INPUT_HANDLE. That would not have the desired
effect if stdin isn't actually the terminal, for instance if the user
is piping something into psql. Fix it to apply the mode change to
the correct input file, so that passwords do not echo in such cases.
In passing, shorten and de-uglify this code by using #elif rather than
an #if nest and removing some duplicated code.
Back-patch to all supported versions. To simplify that, also back-patch
the portions of commit 9daec77e1 that got rid of an unnecessary
malloc/free in the same area.
Matthew Stickney (cosmetic changes by me)
Discussion: https://postgr.es/m/502a1fff-862b-da52-1031-f68df6ed5a2d@gmail.com
Andrew Gierth pointed out that commit 1c72ec6f4 would yield the wrong
answer on big-endian ARM systems, because the data being CRC'd would be
different. To fix that, and avoid the rather unsightly hard-wired
constant, simply compare the hardware and software implementations'
results.
While we're at it, also log the resulting decision at DEBUG1, and error
out if the hw and sw results unexpectedly differ. Also, since this
file must compile for both frontend and backend, avoid incorrect
dependencies on backend-only headers.
In passing, add a comment to postmaster.c about when the CRC function
pointer will get initialized.
Thomas Munro, based on complaints from Andrew Gierth and Tom Lane
Discussion: https://postgr.es/m/HE1PR0801MB1323D171938EABC04FFE7FA9E3110@HE1PR0801MB1323.eurprd08.prod.outlook.com
Update typedefs.list from current buildfarm results. Adjust pgindent's
typedef blacklist to block some more unfortunate typedef names that have
snuck in since last time. Manually tweak a few places where I didn't
like the initial results of pgindent'ing.
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Discussion: https://postgr.es/m/E1f5FAB-0006LU-MB@gemulon.postgresql.org
The code before the main loop, to handle the possible 1-7 unaligned bytes
at the beginning of the input, was broken, and read past the input, if the
the input was very short.
ARMv8 introduced special CPU instructions for calculating CRC-32C. Use
them, when available, for speed.
Like with the similar Intel CRC instructions, several factors affect
whether the instructions can be used. The compiler intrinsics for them must
be supported by the compiler, and the instructions must be supported by the
target architecture. If the compilation target architecture does not
support the instructions, but adding "-march=armv8-a+crc" makes them
available, then we compile the code with a runtime check to determine if
the host we're running on supports them or not.
For the runtime check, use glibc getauxval() function. Unfortunately,
that's not very portable, but I couldn't find any more portable way to do
it. If getauxval() is not available, the CRC instructions will still be
used if the target architecture supports them without any additional
compiler flags, but the runtime check will not be available.
Original patch by Yuqi Gu, heavily modified by me. Reviewed by Andres
Freund, Thomas Munro.
Discussion: https://www.postgresql.org/message-id/HE1PR0801MB1323D171938EABC04FFE7FA9E3110%40HE1PR0801MB1323.eurprd08.prod.outlook.com
Per commit e748e902d, we appear to have little or no coverage in the
buildfarm of machines that will dump core when asked to printf a
null string pointer. Let's try to improve that situation by adding
an assertion that will make src/port/snprintf.c behave that way.
Since it's just an assertion, it won't break anything in production
builds, but it will help developers find this type of oversight.
Note that while our buildfarm coverage of machines that use that
snprintf implementation is pretty thin on the Unix side (apparently
amounting only to gaur/pademelon), all of the MSVC critters use it.
Discussion: https://postgr.es/m/156b989dbc6fe7c4d3223cf51da61195@postgrespro.ru
The previous placement of the fallback implementation in libpgcommon
was problematic, because libpqport functions need strnlen
functionality.
Move replacement into libpgport. Provide strnlen() under its posix
name, instead of pg_strnlen(). Fix stupid configure bug, executing the
test only when compiled with threading support.
Author: Andres Freund
Discussion: https://postgr.es/m/E1e1gR2-0005fB-SI@gemulon.postgresql.org
All postgres internal usages are replaced, it's just libpq example
usages that haven't been converted. External users of libpq can't
generally rely on including postgres internal headers.
Note that this includes replacing open-coded byte swapping of 64bit
integers (using two 32 bit swaps) with a single 64bit swap.
Where it looked applicable, I have removed netinet/in.h and
arpa/inet.h usage, which previously provided the relevant
functionality. It's perfectly possible that I missed other reasons for
including those, the buildfarm will tell.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The postmaster keeps signals blocked everywhere except while waiting
for something to happen in ServerLoop(). The code expects that the
select(2) will be cancelled with EINTR if an interrupt occurs; without
that, followup actions that should be performed by ServerLoop() itself
will be delayed. However, some platforms interpret the SA_RESTART
signal flag as meaning that they should restart rather than cancel
the select(2). Worse yet, some of them restart it with the original
timeout delay, meaning that a steady stream of signal interrupts can
prevent ServerLoop() from iterating at all if there are no incoming
connection requests.
Observable symptoms of this, on an affected platform such as HPUX 10,
include extremely slow parallel query startup (possibly as much as
30 seconds) and failure to update timestamps on the postmaster's sockets
and lockfiles when no new connections arrive for a long time.
We can fix this by running the postmaster's signal handlers without
SA_RESTART. That would be quite a scary change if the range of code
where signals are accepted weren't so tiny, but as it is, it seems
safe enough. (Note that postmaster children do, and must, reset all
the handlers before unblocking signals; so this change should not
affect any child process.)
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point it might
be appropriate to revert this patch. But that's not happening before
v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
The POSIX standard does not say that the success return value for
fcntl(F_SETFD) and fcntl(F_SETFL) is zero; it says only that it's not -1.
We had several calls that were making the stronger assumption. Adjust
them to test specifically for -1 for strict spec compliance.
The standard further leaves open the possibility that the O_NONBLOCK
flag bit is not the only active one in F_SETFL's argument. Formally,
therefore, one ought to get the current flags with F_GETFL and store
them back with only the O_NONBLOCK bit changed when trying to change
the nonblock state. In port/noblock.c, we were doing the full pushup
in pg_set_block but not in pg_set_noblock, which is just weird. Make
both of them do it properly, since they have little business making
any assumptions about the socket they're handed. The other places
where we're issuing F_SETFL are working with FDs we just got from
pipe(2), so it's reasonable to assume the FDs' properties are all
default, so I didn't bother adding F_GETFL steps there.
Also, while pg_set_block deserves some points for trying to do things
right, somebody had decided that it'd be even better to cast fcntl's
third argument to "long". Which is completely loony, because POSIX
clearly says the third argument for an F_SETFL call is "int".
Given the lack of field complaints, these missteps apparently are not
of significance on any common platforms. But they're still wrong,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/30882.1492800880@sss.pgh.pa.us
This is consistent with how we refer to other Windows include files, and
prevents a failure when cross-compiling on a system with case sensitive
file names.
If the process token contains SECURITY_SERVICE_RID, but it has been
disabled by the SE_GROUP_USE_FOR_DENY_ONLY attribute, win32_is_service()
would incorrectly report that we're running as a service. That situation
arises, e.g. if postmaster is launched with a restricted security token,
with the "Log in as Service" privilege explicitly removed.
Replace the broken code with CheckProcessTokenMembership(), which does
this correctly. Also replace similar code in win32_is_admin(), even
though it got this right, for simplicity and consistency.
Per bug #13755, reported by Breen Hagan. Back-patch to all supported
versions. Patch by Takayuki Tsunakawa, reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/20151104062315.2745.67143%40wrigleys.postgresql.org
I removed this in commit 9e3755ecb, reasoning that the win32.h
port-specific header file included by c.h would have provided it.
However, that's only true on native win32 builds, not Cygwin builds.
It may be that some of the other <windows.h> inclusions also need
to be put back on the same grounds; but this is the only one that
is clearly meant to be included #ifdef __CYGWIN__, so maybe this is
the extent of the problem. Awaiting further buildfarm results.
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
These files are deleted but not yet gone from the filesystem. Operations
on them will return ERROR_DELETE_PENDING.
With this we start treating that as ENOENT, meaning files does not
exist (which is the state it will soon reach). This should be safe in
every case except when we try to recreate a file with exactly the same
name. This is an operation that PostgreSQL does very seldom, so
hopefully that won't happen much -- and even if it does, this treatment
should be no worse than treating it as an unhandled error.
We've been un able to reproduce the bug reliably, so pushing this to
master to get buildfarm coverage and other testing. Once it's proven to
be stable, it should be considered for backpatching.
Discussion: https://postgr.es/m/20160712083220.1426.58667%40wrigleys.postgresql.org
Patch by me and Michael Paquier
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
Unlike the current pgcrypto function, the source is chosen by configure.
That makes it easier to test different implementations, and ensures that
we don't accidentally fall back to a less secure implementation, if the
primary source fails. All of those methods are quite reliable, it would be
pretty surprising for them to fail, so we'd rather find out by failing
hard.
If no strong random source is available, we fall back to using erand48(),
seeded from current timestamp, like PostmasterRandom() was. That isn't
cryptographically secure, but allows us to still work on platforms that
don't have any of the above stronger sources. Because it's not very secure,
the built-in implementation is only used if explicitly requested with
--disable-strong-random.
This replaces the more complicated Fortuna algorithm we used to have in
pgcrypto, which is unfortunate, but all modern platforms have /dev/urandom,
so it doesn't seem worth the maintenance effort to keep that. pgcrypto
functions that require strong random numbers will be disabled with
--disable-strong-random.
Original patch by Magnus Hagander, tons of further work by Michael Paquier
and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqRWkNYRRPJA7-cF+LfroYV10pvjdz6GNvxk-Eee9FypKA@mail.gmail.com
This extends to MinGW builds the provision for MSVC-built libraries to
see putenv() effects. Doing so repairs, for example, the handling of
the krb_server_keyfile parameter when linked with MSVC-built MIT
Kerberos. Like the previous commit, no back-patch.
Until now, the first putenv() call of a given postgres.exe process would
cache the set of loaded CRTs. If a CRT unloaded after that call, the
next putenv() would crash. That risk was largely theoretical, because
the first putenv() precedes all PostgreSQL-initiated module loading.
However, this might explain bad interactions with antivirus and other
software that injects threads asynchronously. If an additional CRT
loaded after the first putenv(), pgwin32_putenv() would not discover it.
That CRT would have all environment changes predating its load, but it
would not receive later PostgreSQL-initiated changes. An additional CRT
loading concurrently with the first putenv() might miss that change in
addition to missing later changes. Fix all those problems. This
removes the cache mechanism from pgwin32_putenv(); the cost, less than
100 μs per backend startup, is negligible.
No resulting misbehavior was known to be user-visible given the core
distribution alone, but one can readily construct an affected extension
module. No back-patch given the lack of complaints and the potential
for behavior changes in non-PostgreSQL code running in the backend.
Christian Ullrich, reviewed by Michael Paquier.
This has no effect in the most conventional case, where no relevant DLL
uses a debug build. For an example where it does matter, given a debug
build of MIT Kerberos, the krb_server_keyfile parameter usually had no
effect. Since nobody wants a Heisenbug, back-patch to 9.2 (all
supported versions).
Christian Ullrich, reviewed by Michael Paquier.
In accordance with its own documentation, invoke CloseHandle() only when
directed in the documentation for the function that furnished the
handle. GetModuleHandle() does not so direct. We have been issuing
this call only in the rare event that a CRT DLL contains no "_putenv"
symbol, so lack of bug reports is uninformative. Back-patch to 9.2 (all
supported versions).
Christian Ullrich, reviewed by Michael Paquier.
Replace use of plain 0 as a null pointer constant. In comments, update
terminology and lessen redundancy. Back-patch to 9.2 (all supported
versions) for the convenience of back-patching the next two commits.
Christian Ullrich and Noah Misch, reviewed (in earlier versions) by
Michael Paquier.
The error message when we couldn't determine the encoding from a locale
said to report a bug about that. That might have been appropriate when
this code was first added, but by now this works pretty solidly and any
encodings we don't recognize we probably just don't support. We still
print the warning, but no longer invite the bug report.
This will write the received transaction log into a file called
pg_wal.tar(.gz) next to the other tarfiles instead of writing it to
base.tar. When using fetch mode, the transaction log is still written to
base.tar like before, and when used against a pre-10 server, the file
is named pg_xlog.tar.
To do this, implement a new concept of a "walmethod", which is
responsible for writing the WAL. Two implementations exist, one that
writes to a plain directory (which is also used by pg_receivexlog) and
one that writes to a tar file with optional compression.
Reviewed by Michael Paquier
This reverts commit 9e083fd468. That was a
few bricks shy of a load:
* Query cancel stopped working
* Buildfarm member pademelon stopped working, because the box doesn't have
/dev/urandom nor /dev/random.
This clearly needs some more discussion, and a quite different patch, so
revert for now.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
- /dev/random
Original patch by Magnus Hagander, with further work by Michael Paquier
and me.
Discussion: <CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com>
SCO OpenServer and SCO UnixWare are more or less dead platforms.
We have never had a buildfarm member testing the "sco" port, and
the last "unixware" member was last heard from in 2012, so it's
fair to doubt that the code even compiles anymore on either one.
Remove both ports. We can always undo this if someone shows up
with an interest in maintaining and testing these platforms.
Discussion: <17177.1476136994@sss.pgh.pa.us>
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
When win32security.c was moved from src/backend/port/win32/security.c,
the message writing function was changed from write_stderr to log_error,
but nls.mk was not updated. We could add log_error to GETTEXT_TRIGGERS,
but it's also used in src/common/exec.c in a different way and that
would create some confusion or a larger patch. For now, just put an
explicit translation marker onto the strings that were previously
translated.
The previous API for this function had it returning a malloc'd string.
That meant that callers had to check for NULL return, which few of them
were doing, and it also meant that callers had to remember to free()
the string later, which required extra logic in most cases.
Instead, make simple_prompt() write into a buffer supplied by the caller.
Anywhere that the maximum required input length is reasonably small,
which is almost all of the callers, we can just use a local or static
array as the buffer instead of dealing with malloc/free.
A fair number of callers used "pointer == NULL" as a proxy for "haven't
requested the password yet". Maintaining the same behavior requires
adding a separate boolean flag for that, which adds back some of the
complexity we save by removing free()s. Nonetheless, this nets out
at a small reduction in overall code size, and considerably less code
than we would have had if we'd added the missing NULL-return checks
everywhere they were needed.
In passing, clean up the API comment for simple_prompt() and get rid
of a very-unnecessary malloc/free in its Windows code path.
This is nominally a bug fix, but it does not seem worth back-patching,
because the actual risk of an OOM failure in any of these places seems
pretty tiny, and all of them are client-side not server-side anyway.
This patch is by me, but it owes a great deal to Michael Paquier
who identified the problem and drafted a patch for fixing it the
other way.
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>