Instead of letting every backend participating in a group commit wait
independently, have the first one that becomes ready to flush WAL wait
for the configured delay, and let all the others wait just long enough
for that first process to complete its flush. This greatly increases
the chances of being able to configure a commit_delay setting that
actually improves performance.
As a side consequence of this change, commit_delay now affects all WAL
flushes, rather than just commits. There was some discussion on
pgsql-hackers about whether to rename the GUC to, say, wal_flush_delay,
but in the absence of consensus I am leaving it alone for now.
Peter Geoghegan, with some changes, mostly to the documentation, by me.
Per testing by Andres Freund, this improves replication performance
and reduces replication latency and latency jitter. I was a bit
concerned about moving more work into XLogInsert, but testing seems
to show that it's not a problem in practice.
Along the way, improve comments for WaitLatchOrSocket.
Andres Freund. Review and stylistic cleanup by me.
If the record header is garbled, we're now quite likely to notice it before
we try to make a bogus memory allocation and run out of memory. That can
still happen, if the xlog record is split across pages (we cannot verify
the record header until reading the next page in that scenario), but this
reduces the chances. An out-of-memory is treated as a corrupt record
anyway, so this isn't a correctness issue, just a case of giving a better
error message.
Per Amit Kapila's suggestion.
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
This saves a few bytes of WAL space, but the real motivation is to make it
predictable how much WAL space a record requires, as it no longer depends
on whether we need to waste the last few bytes at end of WAL page because
the header doesn't fit.
The total length field of WAL record, xl_tot_len, is moved to the beginning
of the WAL record header, so that it is still always found on the first page
where a WAL record begins.
Bump WAL version number again as this is an incompatible change.
The continuation record only contained one field, xl_rem_len, so it makes
things simpler to just include it in the WAL page header. This wastes four
bytes on pages that don't begin with a continuation from previos page, plus
four bytes on every page, because of padding.
The motivation of this is to make it easier to calculate how much space a
WAL record needs. Before this patch, it depended on how many page boundaries
the record crosses. The motivation of that, in turn, is to separate the
allocation of space in the WAL from the copying of the record data to the
allocated space. Keeping the calculation of space required simple helps to
keep the critical section of allocating the space from WAL short. But that's
not included in this patch yet.
Bump WAL version number again, as this is an incompatible change.
The comments claimed that wasting the last segment made it easier to do
calculations with XLogRecPtrs, because you don't have problems representing
last-byte-position-plus-1 that way. In my experience, however, it only made
things more complicated, because the there was two ways to represent the
boundary at the beginning of a logical log file: logid = n+1 and xrecoff = 0,
or as xlogid = n and xrecoff = 4GB - XLOG_SEG_SIZE. Some functions were
picky about which representation was used.
Also, use a 64-bit segment number instead of the log/seg combination, to
point to a certain WAL segment. We assume that all platforms have a working
64-bit integer type nowadays.
This is an incompatible change in WAL format, so bumping WAL version number.
This reverts commit 18fb9d8d21. Per
discussion, it does not seem like a good idea to allow committed changes to
go un-checkpointed indefinitely, as could happen in a low-traffic server;
that makes us entirely reliant on the WAL stream with no redundancy that
might aid data recovery in case of disk failure.
This re-introduces the original problem of hot-standby setups generating a
small continuing stream of WAL traffic even when idle, but there are other
ways to address that without compromising crash recovery, so we'll revisit
that issue in a future release cycle.
WALSender now woken up after each background flush by WALwriter, avoiding
multi-second replication delay for an all-async commit workload.
Replication delay reduced from 7s with default settings to 200ms and often
much less, allowing significantly reduced data loss at failover.
Andres Freund and Simon Riggs
Users of asynchronous-commit mode expect there to be a guaranteed maximum
delay before an async commit's WAL records get flushed to disk. The
original version of the walwriter hibernation patch broke that. Add an
extra shared-memory flag to allow async commits to kick the walwriter out
of hibernation mode, without adding any noticeable overhead in cases where
no action is needed.
This patch modifies the walwriter process so that, when it has not found
anything useful to do for many consecutive wakeup cycles, it extends its
sleep time to reduce the server's idle power consumption. It reverts to
normal as soon as it's done any successful flushes. It's still true that
during any async commit, backends check for completed, unflushed pages of
WAL and signal the walwriter if there are any; so that in practice the
walwriter can get awakened and returned to normal operation sooner than the
sleep time might suggest.
Also, improve the checkpointer so that it uses a latch and a computed delay
time to not wake up at all except when it has something to do, replacing a
previous hardcoded 0.5 sec wakeup cycle. This also is primarily useful for
reducing the server's power consumption when idle.
In passing, get rid of the dedicated latch for signaling the walwriter in
favor of using its procLatch, since that comports better with possible
generic signal handlers using that latch. Also, fix a pre-existing bug
with failure to save/restore errno in walwriter's signal handlers.
Peter Geoghegan, somewhat simplified by Tom
This patch adjusts the core statistics views to match the decision already
taken for pg_stat_statements, that values representing elapsed time should
be represented as float8 and measured in milliseconds. By using float8,
we are no longer tied to a specific maximum precision of timing data.
(Internally, it's still microseconds, but we could now change that without
needing changes at the SQL level.)
The columns affected are
pg_stat_bgwriter.checkpoint_write_time
pg_stat_bgwriter.checkpoint_sync_time
pg_stat_database.blk_read_time
pg_stat_database.blk_write_time
pg_stat_user_functions.total_time
pg_stat_user_functions.self_time
pg_stat_xact_user_functions.total_time
pg_stat_xact_user_functions.self_time
The first four of these are new in 9.2, so there is no compatibility issue
from changing them. The others require a release note comment that they
are now double precision (and can show a fractional part) rather than
bigint as before; also their underlying statistics functions now match
the column definitions, instead of returning bigint microseconds.
Initialise ckptXidEpoch from starting checkpoint and maintain the correct
value as we roll forwards. This allows GetNextXidAndEpoch() to return the
correct epoch when executed during recovery. Backpatch to 9.0 when the
problem is first observable by a user.
Bug report from Daniel Farina
This simplifies the code a little bit. The new rule is that to update
XLogCtl->LogwrtResult, you must hold both WALWriteLock and info_lck, whereas
before we had two copies, one that was protected by WALWriteLock and another
protected by info_lck. The code that updates them was already holding both
locks, so merging the two is trivial.
The third copy, XLogCtl->Insert.LogwrtResult, was not totally redundant, it
was used in AdvanceXLInsertBuffer to update the backend-local copy, before
acquiring the info_lck to read the up-to-date value. But the value of that
seems dubious; at best it's saving one spinlock acquisition per completed
WAL page, which is not significant compared to all the other work involved.
And in practice, it's probably not saving even that much.
It's harmless to do full page writes even when not strictly necessary, so
when turning full_page_writes on, we can set the global flag first, and then
call XLogInsert. Likewise, when turning it off, we can write the WAL record
first, and then clear the flag. This way XLogInsert doesn't need any special
handling of the XLOG_FPW_CHANGE record type. XLogInsert is complicated
enough already, so anything we can keep away from there is a good thing.
Actually I don't think the atomicity of the shared memory flag matters,
anyway, because we only write the XLOG_FPW_CHANGE at the end of recovery,
when there are no concurrent WAL insertions going on. But might as well make
it safe, in case we allow changing full_page_writes on the fly in the
future.
Originally, most of this code assumed that no Postgres backends could be
running concurrently with it, and so no locking could be needed. That
assumption fails in Hot Standby. While it's still true that Hot Standby
backends should never change values like nextXid, they can examine them,
and consistency is important in some cases such as when computing a
snapshot. Therefore, prudence requires that WAL replay code obtain the
relevant locks when modifying such variables, even though it can examine
them without taking a lock. We were following that coding rule in some
places but not all. This commit applies the coding rule uniformly to all
updates of ShmemVariableCache and MultiXactState fields; a search of the
replay routines did not find any other cases that seemed to be at risk.
In addition, this commit fixes a longstanding thinko in replay of NEXTOID
and checkpoint records: we tried to advance nextOid only if it was behind
the value in the WAL record, but the comparison would draw the wrong
conclusion if OID wraparound had occurred since the previous value.
Better to just unconditionally assign the new value, since OID assignment
shouldn't be happening during replay anyway.
The additional locking seems to be more in the nature of future-proofing
than fixing any live bug, so I am not going to back-patch it. The NEXTOID
fix will be back-patched separately.
RestoreBkpBlocks was in the habit of zeroing and refilling the target
buffer; which was perfectly safe when the code was written, but is unsafe
during Hot Standby operation. The reason is that we have coding rules
that allow backends to continue accessing a tuple in a heap relation while
holding only a pin on its buffer. Such a backend could see transiently
zeroed data, if WAL replay had occasion to change other data on the page.
This has been shown to be the cause of bug #6425 from Duncan Rance (who
deserves kudos for developing a sufficiently-reproducible test case) as
well as Bridget Frey's re-report of bug #6200. It most likely explains the
original report as well, though we don't yet have confirmation of that.
To fix, change the code so that only bytes that are supposed to change will
change, even transiently. This actually saves cycles in RestoreBkpBlocks,
since it's not writing the same bytes twice.
Also fix seq_redo, which has the same disease, though it has to work a bit
harder to meet the requirement.
So far as I can tell, no other WAL replay routines have this type of bug.
In particular, the index-related replay routines, which would certainly be
broken if they had to meet the same standard, are not at risk because we
do not have coding rules that allow access to an index page when not
holding a buffer lock on it.
Back-patch to 9.0 where Hot Standby was added.
When a backend needs to flush the WAL, and someone else is already flushing
the WAL, wait until it releases the WALInsertLock and check if we still need
to do the flush or if the other backend already did the work for us, before
acquiring WALInsertLock. This helps group commit, because when the WAL flush
finishes, all the backends that were waiting for it can be woken up in one
go, and the can all concurrently observe that they're done, rather than
waking them up one by one in a cascading fashion.
This is based on a new LWLock function, LWLockWaitUntilFree(), which has
peculiar semantics. If the lock is immediately free, it grabs the lock and
returns true. If it's not free, it waits until it is released, but then
returns false without grabbing the lock. This is used in XLogFlush(), so
that when the lock is acquired, the backend flushes the WAL, but if it's
not, the backend first checks the current flush location before retrying.
Original patch and benchmarking by Peter Geoghegan and Simon Riggs, although
this patch as committed ended up being very different from that.
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
Previously we used ReadRecPtr rather than EndRecPtr, which was
not a serious error but caused pg_stat_replication to report
incorrect replay_location until at least one WAL record is replayed.
Fujii Masao
constructed before acquiring WALInsertLock, which slightly reduces the time
the lock is held. Although I could not measure any benefit in benchmarks,
the code is more readable this way.
Removing this bit from xl_info allows us to restore the old limit of four
(not three) separate pages touched by a WAL record, which is needed for the
upcoming SP-GiST feature, and will likely be useful elsewhere in future.
When we implemented XLR_BKP_REMOVABLE in 2007, we had to do it like that
because no special WAL-visible action was taken when starting a backup.
However, now we force a segment switch when starting a backup, so a
compressing WAL archiver (such as pglesslog) that uses the state shown in
the current page header will not be fooled as to removability of backup
blocks. The only downside is that the archiver will not return to
compressing mode for up to one WAL page after the backup is over, which is
a small price to pay for getting back the extra xl_info bit. In any case
the archiver could look for XLOG_BACKUP_END records if it thought it was
worth the trouble to do so.
Bump XLOG_PAGE_MAGIC since this is effectively a change in WAL format.
we don't reach consistency before replaying all of the WAL. Rename the
variable to reachedConsistency, to make its intention clearer.
In master, that was an active bug because of the recent patch to
immediately PANIC if a reference to a missing page is found in WAL after
reaching consistency, as Tom Lane's test case demonstrated. In 9.1 and 9.0,
the only consequence was a misleading "consistent recovery state reached at
%X/%X" message in the log at the beginning of crash recovery (the database
is not consistent at that point yet). In 8.4, the log message was not
printed in crash recovery, even though there was a similar
reachedMinRecoveryPoint local variable that was also set early. So,
backpatch to 9.1 and 9.0.
invalid-page hash table, PANIC immediately. Immediate PANIC is much better
than waiting for end-of-recovery, which is what we did before, because the
end-of-recovery might not come until months later if this is a standby
server.
Also refrain from creating a restartpoint if there are invalid-page entries
in the hash table. Restarting recovery from such a restartpoint would not
see the invalid references, and wouldn't be able to cross-check them when
consistency is reached. That wouldn't matter when things are going smoothly,
but the more sanity checks you have the better.
Fujii Masao
Previously we waited for wal_writer_delay before flushing WAL. Now
we also wake WALWriter as soon as a WAL buffer page has filled.
Significant effect observed on performance of asynchronous commits
by Robert Haas, attributed to the ability to set hint bits on tuples
earlier and so reducing contention caused by clog lookups.
Previously, we skipped a checkpoint if no WAL had been written since
last checkpoint, though this does not appear in user documentation.
As of now, we skip a checkpoint until we have written at least one
enough WAL to switch the next WAL file. This greatly reduces the
level of activity and number of WAL messages generated by a very
low activity server. This is safe because the purpose of a checkpoint
is to act as a starting place for a recovery, in case of crash.
This patch maintains minimal WAL volume for replay in case of crash,
thus maintaining very low crash recovery time.
There was a timing window between when oldestActiveXid was derived
and when it should have been derived that only shows itself under
heavy load. Move code around to ensure correct timing of derivation.
No change to StartupSUBTRANS() code, which is where this failed.
Bug report by Chris Redekop
A transaction can export a snapshot with pg_export_snapshot(), and then
others can import it with SET TRANSACTION SNAPSHOT. The data does not
leave the server so there are not security issues. A snapshot can only
be imported while the exporting transaction is still running, and there
are some other restrictions.
I'm not totally convinced that we've covered all the bases for SSI (true
serializable) mode, but it works fine for lesser isolation modes.
Joachim Wieland, reviewed by Marko Tiikkaja, and rather heavily modified
by Tom Lane
This is merely an exercise in satisfying pedants, not a bug fix, because
in every case we were checking for failure later with ferror(), or else
there was nothing useful to be done about a failure anyway. Document
the latter cases.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
In pursuit of this (and with the expectation that WaitLatch will be needed
in more places), convert the latch field that was already added to PGPROC
for sync rep into a generic latch that is activated for all PGPROC-owning
processes, and change many of the standard backend signal handlers to set
that latch when a signal happens. This will allow WaitLatch callers to be
wakened properly by these signals.
In passing, fix a whole bunch of signal handlers that had been hacked to do
things that might change errno, without adding the necessary save/restore
logic for errno. Also make some minor fixes in unix_latch.c, and clean
up bizarre and unsafe scheme for disowning the process's latch. Much of
this has to be back-patched into 9.1.
Peter Geoghegan, with additional work by Tom
streamed backup, throw an error and refuse to start up. The restore has not
finished correctly in that case and the data directory is possibly corrupt.
We already errored out in case of archive recovery, but could not during
crash recovery because we couldn't distinguish between the case that
pg_start_backup() was called and the database then crashed (must not error,
data is OK), and the case that we're restoring from a backup and not all
the needed WAL was replayed (data can be corrupt).
To distinguish those cases, add a line to backup_label to indicate
whether the backup was taken with pg_start/stop_backup(), or by streaming
(ie. pg_basebackup).
This requires re-initdb, because of a new field added to the control file.
The original definition had the problem that timeouts exceeding about 2100
seconds couldn't be specified on 32-bit machines. Milliseconds seem like
sufficient resolution, and finer grain than that would be fantasy anyway
on many platforms.
Back-patch to 9.1 so that this aspect of the latch API won't change between
9.1 and later releases.
Peter Geoghegan
Standby servers can now have WALSender processes, which can work with
either WALReceiver or archive_commands to pass data. Fully updated
docs, including new conceptual terms of sending server, upstream and
downstream servers. WALSenders terminated when promote to master.
Fujii Masao, review, rework and doc rewrite by Simon Riggs
detect postmaster death. Postmaster keeps the write-end of the pipe open,
so when it dies, children get EOF in the read-end. That can conveniently
be waited for in select(), which allows eliminating some of the polling
loops that check for postmaster death. This patch doesn't yet change all
the loops to use the new mechanism, expect a follow-on patch to do that.
This changes the interface to WaitLatch, so that it takes as argument a
bitmask of events that it waits for. Possible events are latch set, timeout,
postmaster death, and socket becoming readable or writeable.
The pipe method behaves slightly differently from the kill() method
previously used in PostmasterIsAlive() in the case that postmaster has died,
but its parent has not yet read its exit code with waitpid(). The pipe
returns EOF as soon as the process dies, but kill() continues to return
true until waitpid() has been called (IOW while the process is a zombie).
Because of that, change PostmasterIsAlive() to use the pipe too, otherwise
WaitLatch() would return immediately with WL_POSTMASTER_DEATH, while
PostmasterIsAlive() would claim it's still alive. That could easily lead to
busy-waiting while postmaster is in zombie state.
Peter Geoghegan with further changes by me, reviewed by Fujii Masao and
Florian Pflug.
XLOG_XACT_COMMIT_COMPACT leaves out invalidation messages and relfilenodes,
saving considerable space for the vast majority of transaction commits.
XLOG_XACT_COMMIT keeps same definition as XLOG_PAGE_MAGIC 0xD067 and earlier.
Leonardo Francalanci and Simon Riggs
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
ReadRecord's habit of using both direct references to tmpRecPtr and
references to *RecPtr (which is pointing at tmpRecPtr) triggers an
optimization bug in gcc 4.6.0, which apparently has forgotten about
aliasing rules. Avoid the compiler bug, and make the code more readable
to boot, by getting rid of the direct references. Improve the comments
while at it.
Back-patch to all supported versions, in case they get built with 4.6.0.
Tom Lane, with some cosmetic suggestions from Alex Hunsaker
Before commit c016ce7281, this wasn't
needed, but now that multiple resource manager IDs can percolate down
through here, we have to make sure we know which one we've got.
Otherwise, we can confuse (for example) an XLOG_XACT_COMMIT record
with an XLOG_CHECKPOINT_SHUTDOWN record.
Review by Jaime Casanova
crash recovery, and throw an error if not. hubert depesz lubaczewski pointed
out that that situation also happens in the crash recovery following a
system crash that happens during an online backup.
We might want to do something smarter in 9.1, like put the check back for
backups taken with pg_basebackup, but that's for another patch.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
archive recovery.
It's possible to restore an online backup without recovery.conf, by simply
copying all the necessary WAL files to pg_xlog. "pg_basebackup -x" does that
too. That's the use case where this cross-check is useful.
Backpatch to 9.0. We used to do this in earlier versins, but in 9.0 the code
was inadvertently changed so that the check is only performed after archive
recovery.
Fujii Masao.
Change location LOG message so it works each time we pause, not
just for final pause.
Ensure that we pause only if we are in Hot Standby and can connect
to allow us to run resume function. This change supercedes the
code to override parameter recoveryPauseAtTarget to false if not
attempting to enter Hot Standby, which is now removed.
Startup process waited for cleanup lock but when hot_standby = off
the pid was not registered, so that the bgwriter would not wake
the waiting process as intended.
ensure that they use different checkpoints as the starting point. We use
the checkpoint redo location as a unique identifier for the base backup in
the end-of-backup record, and in the backup history file name.
Bug spotted by Fujii Masao.
than doing it aggressively whenever the tail-XID pointer is advanced, because
this way we don't need to do it while holding SerializableXactHashLock.
This also fixes bug #5915 spotted by YAMAMOTO Takashi, and removes an
obsolete comment spotted by Kevin Grittner.
periodically rescan the archive for new timelines, while waiting for new WAL
segments to arrive. This allows you to set up a standby server that follows
the TLI change if another standby server is promoted to master. Before this,
you had to restart the standby server to make it notice the new timeline.
This patch only scans the archive for TLI changes, it won't follow a TLI
change in streaming replication. That is much needed too, but it would be a
much bigger patch than I dare to sneak in this late in the release cycle.
There was discussion on improving the sanity checking of the WAL segments so
that the system would notice more reliably if the new timeline isn't an
ancestor of the current one, but that is not included in this patch.
Reviewed by Fujii Masao.
Emit a log message when creating a named restore point, and improve
documentation for pg_create_restore_point().
Euler Taveira de Oliveira, per suggestions from Thom Brown, with some
additional wordsmithing by me.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
though must not update the last transaction timestamp.
Plus comment and message cleanup for recent named restore point.
Fujii Masao, minor changes by me
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Specifying this option makes the server not wait for the
xlog to be archived, or emit a warning that it can't,
instead leaving the responsibility with the client.
This is useful when the log is being streamed using
the streaming protocol in parallel with the backup,
without having log archiving enabled.
new recovery.conf parameter recovery_target_name allows PITR to
specify named points as recovery targets.
Jaime Casanova, reviewed by Euler Taveira de Oliveira, plus minor edits
If the standby was streaming when trigger file arrives, check also in the
archive for additional WAL files. This is a corner case since it is
unlikely that we would trigger a failover while the master is still
available and sending data to standby, while at the same time running in
archive mode and also while the streaming standby has fallen behind archive.
Someone would eventually be unlucky; we must plug all gaps however small.
Fujii Masao
Prior to 9.0, restartpoints never created, deleted, or recycled WAL
files, but now they can. This code makes log_checkpoints treat
checkpoints and restartpoints symmetrically. It also adjusts up
the documentation of the parameter to mention restartpoints.
Fujii Masao. Docs by me, as suggested by Itagaki Takahiro.
With this patch, pg_basebackup doesn't write a backup_label file in the
data directory, so it doesn't interfere with a pg_start/stop_backup() based
backup anymore. backup_label is still included in the backup, but it is
injected directly into the tar stream.
Heikki Linnakangas, reviewed by Fujii Masao and Magnus Hagander.
If wal_buffers is initially set to -1 (which is now the default), it's
replaced by 1/32nd of shared_buffers, with a minimum of 8 (the old default)
and a maximum of the XLOG segment size. The allowed range for manual
settings is still from 4 up to whatever will fit in shared memory.
Greg Smith, with implementation correction by me.
Move the actual functionality into a separate function that's
easier to call internally, and change the SQL-callable function
to be a wrapper calling this.
Also create a pg_abort_backup() function, only callable internally,
that does only the most vital parts of pg_stop_backup(), making it
safe(r) to call from error handlers.
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This privilege is required to do Streaming Replication, instead of
superuser, making it possible to set up a SR slave that doesn't
have write permissions on the master.
Superuser privileges do NOT override this check, so in order to
use the default superuser account for replication it must be
explicitly granted the REPLICATION permissions. This is backwards
incompatible change, in the interest of higher default security.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
an old transaction running in the master, and a lot of transactions have
started and finished since, and a WAL-record is written in the gap between
the creating the running-xacts snapshot and WAL-logging it, recovery will fail
with "too many KnownAssignedXids" error. This bug was reported by
Joachim Wieland on Nov 19th.
In the same scenario, when fewer transactions have started so that all the
xids fit in KnownAssignedXids despite the first bug, a more serious bug
arises. We incorrectly initialize the clog code with the oldest still running
transaction, and when we see the WAL record belonging to a transaction with
an XID larger than one that committed already before the checkpoint we're
recovering from, we zero the clog page containing the already committed
transaction, leading to data loss.
In hindsight, trying to track xids in the known-assigned-xids array before
seeing the running-xacts record was too complicated. To fix that, hold
XidGenLock while the running-xacts snapshot is taken and WAL-logged. That
ensures that no transaction can begin or end in that gap, so that in recvoery
we know that the snapshot contains all transactions running at that point in
WAL.
This eliminates some crufty, special-purpose code and, as a non-trivial
side benefit, allows recovery.conf parameters to be unquoted.
Dimitri Fontaine, with review and cleanup by Alvaro Herrera, Itagaki
Takahiro, and me.
location read from backup label file can be found: wasShutdown was set
incorrectly when a backup label file was found.
Jeff Davis, with a little tweaking by me.
rather than 0/0, so that we can safely use 0/0 as an invalid value. This is a
more future-proof fix for the corner-case bug in streaming replication that
was fixed yesterday. We had a similar corner-case bug with log/seg 0/0 back in
February as well. Avoiding 0/0 as a valid value should prevent bugs like that
in the future. Per Tom Lane's idea.
Back-patch to 9.0. Since this only affects bootstrapping, it makes no
difference to existing installations. We don't need to worry about the
bug in existing installations, because if you've managed to get past the
initial base backup already, you won't hit the bug in the future either.
streaming replication. We used log/seg 0/0 to indicate that no WAL segments
have been removed since startup, but 0/0 is a valid value for the very first
WAL segment after initdb. To make that disambiguous, store
(latest removed WAL segment + 1) in the global variable.
Per report from Matt Chesler, also reproduced by Greg Smith.
that WAL file containing the checkpoint redo-location can be found. This
avoids making the cluster irrecoverable if the redo location is in an earlie
WAL file than the checkpoint record.
Report, analysis and patch by Jeff Davis, with small changes by me.
new WAL arrives via streaming replication. This reduces the latency, and
also allows us to use a longer polling interval, which is good for energy
efficiency.
We still need to poll to check for the appearance of a trigger file, but
the interval is now 5 seconds (instead of 100ms), like when waiting for
a new WAL segment to appear in WAL archive.
Transaction aborts now record their LSN to avoid corner case
behaviour in SR/HS, hence change of name of variables and functions.
As pointed out by Fujii Masao. Cosmetic changes only.
idea from the start since the variable is only meant to track commit/abort
events. This patch reverts the logic around the variable to what it was in
8.4, except that the value is now kept in shared memory rather than a static
variable, so that it can be reported correctly by CreateRestartPoint (which is
executed in the bgwriter).
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
master. Otherwise a subsequent crash could cause the master to lose WAL that
has already been applied on the slave, resulting in the slave being out of
sync and soon corrupt. Per recent discussion and an example from Robert Haas.
Fujii Masao
and retry. If the record is genuinely corrupt in the master database,
there's little hope of recovering, but it's better than simply retrying
to apply the corrupt WAL record in a tight loop without even trying to
retransmit it, which is what we used to do.
pg_last_xlog_replay_location(). Per Robert Haas's suggestion, after
Itagaki Takahiro pointed out an issue in the docs. Also, some wording
changes in the docs by me.
checkpoint_timeout to trigger restartpoints. We used to deliberately only
do time-based restartpoints, because if checkpoint_segments is small we
would spend time doing restartpoints more often than really necessary.
But now that restartpoints are done in bgwriter, they're not as
disruptive as they used to be. Secondly, because streaming replication
stores the streamed WAL files in pg_xlog, we want to clean it up more
often to avoid running out of disk space when checkpoint_timeout is large
and checkpoint_segments small.
Patch by Fujii Masao, with some minor changes by me.
the current one. Not doing this would leave the walwriter with a handle to a
deleted file if there was nothing for it to do for a long period of time,
preventing the file from being completely removed.
Reported by Tollef Fog Heen, and thanks to Heikki for some hand-holding with
the patch.
of requirements and documentation on LogStandbySnapshot(). Fixes
two minor bugs reported by Tom Lane that would lead to an incorrect
snapshot after transaction wraparound. Also fix two other problems
discovered that would give incorrect snapshots in certain cases.
ProcArrayApplyRecoveryInfo() substantially rewritten. Some minor
refactoring of xact_redo_apply() and ExpireTreeKnownAssignedTransactionIds().
minRecoveryPoint in control file when replaying a parameter change record,
to ensure that we don't allow hot standby on WAL generated without
wal_level='hot_standby' after a standby restart.
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
to perform a backup without archive_mode being enabled. This gives up some
user-error protection in order to improve usefulness for streaming-replication
scenarios. Per discussion.
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
in WAL recovery when it sees the shutdown checkpoint record. It's more
user-friendly to find out about it at that point than at the end of
recovery, and you're not left wondering why your hot standby server never
opens up for read-only connections.
of parameters. Fix bug report by Robert Haas that error message and
hint was incorrect if wrong mode parameters specified on master.
Internal changes only. Proposals for parameter simplification on
master/primary still under way.
Also, make the name of the GUC and the name of the backing variable match.
Alnong the way, clean up a couple of slight typographical errors in the
related docs.
Now doesn't report it is waiting until it actually is waiting,
plus message doesn't appear until at least 5 seconds wait, so
we avoid reporting the wait before we've given the archiver
a reasonable time to wake up and archive the file we just
created earlier in the function.
Also add new unconditional message to confirm safe completion.
Now a normal, healthy execution does not report waiting at
all, just safe completion.
through normal backends. Makes code clearer also, since we
avoid various Assert()s. Performance of snapshots taken
during recovery no longer depends upon number of read-only
backends.
after actually removing one, so that if we can't remove segments because
WAL archiving is lagging behind, we don't unnecessarily forbid streaming
the old not-yet-archived segments that are still perfectly valid. Per
suggestion from Fujii Masao.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
recovery. We might want to relax this in the future, but ThisTimeLineID
isn't currently correct in backends during recovery, so the filename
returned was wrong.
This allows us to see what mode the server is in before it starts to
perform actions that can block or hang. Otherwise server messages
may not appear until after messages that say FATAL the database
server is starting up.
The error message now makes explicit reference to the GUC that must be changed
to fix the problem, using wording suggested by Tom Lane. Along the way,
rename the GUC from MaxWalSenders to max_wal_senders for consistency and
grep-ability.
pg_xlog directory. This is essential for replaying WAL records that
were streamed from the master, after a standby server restart.
If a corrupt record is seen in a file restored from the archive or
streamed from the master, log it as a WARNING and keep retrying. If the
corruption is permanent, and not just a glitch in the whatever copies the
files to the archive or a network error not caught by CRC checks in TCP
for example, we will keep retrying and logging the WARNING indefinitely.
But that's better than shutting down completely, the standby is still
useful for running read-only queries. In PITR the recovery ends at such a
corrupt record, which is a bit questionable, but that's the behavior we
had in previous releases and we don't feel like chaning it now. It does
make sense for tools like pg_standby.
present since 8.0 was never fully meaningful, since two recovery targets
cannot be specified. Refactor recovery target type to make this change
and associated code easier to understand. No change in function.
Bug report arising from internal support question.
in recovery_end_command, it always came out as 0 because InRedo was
cleared before recovery_end_command was executed. Also, always take
ControlFileLock when reading checkpoint location for %r.
The recovery_end_command bug and the missing locking was present in 8.4
as well, that part of this patch will be backported separately.
instead of an exclusive lock.
The change is almost for code cleanup. Since there seems to be no
performance benefits from it, backports should not be needed.
Fujii Masao
enabled. Bypassing the kernel cache is counter-productive in that case,
because the archiver/walsender process will read from the WAL file
soon after it's written, and if it's not cached the read will cause
a physical read, eating I/O bandwidth available on the WAL drive.
Also, walreceiver process does unaligned writes, so disable O_DIRECT
in walreceiver process for that reason too.
segment of XLOG_BACKUP_END record even if the the record is placed
at a segment boundary. Furthermore the previous implementation could
return nonexistent segment file name when the boundary is in segments
that has "FE" suffix; We never use segments with "FF" suffix.
Backpatch to 8.0, where hot backup was introduced.
Reported by Fujii Masao.
all the values derived from oldestXid, not just that field. Brain fade in
one of my patches associated with flat file removal, exposed by a report
from Fujii Masao.
With this change, xidVacLimit should always be valid, so remove a couple of
bits of complexity associated with the previous assumption that sometimes
it wouldn't get set right away.
echo all the recovery.conf options. Don't emit the "initializing
recovery connections" message, which doesn't mean anything to a user.
Remove the "starting archive recovery" message and replace the
"automatic recovery in progress" message with a more informative message
saying whether the server is doing PITR, normal archive recovery, or
standby mode.
a partial WAL file, assume it's because the file is just being copied to
the archive and treat it the same as "file not found" in standby mode.
pg_standby has a similar check, so it seems reasonable to have the same
level of protection in the built-in standby mode.
restoring from archive, the last WAL segment is not necessarily open at
the end of recovery. Fix assertion that assumed that.
Fujii Masao, fixing the assertion failure reported by Martin Pihlak.
recovery. It's zeroed out whenever a checkpoint is written, so the only
scenario where the removed code did anything is when you kill archive
recovery, remove recovery.conf, and start up the server, so that it goes
into crash recovery instead. That's a "don't do that" scenario, but it
seems better to not clear minRecoveryPoint but instead update it like we
do in archive recovery, which is what will now happen.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
false positives during Hot Standby conflict processing. Simple
patch to enhance conflict processing, following previous discussions.
Controlled by parameter minimize_standby_conflicts = on | off, with
default off allows measurement of performance impact to see whether
it should be set on all the time.
LogwrtRqst.Write can be set to non-existent FF log segment, we mustn't
try to send that in XLogSend().
Also fix similar bug in ReadRecord(), which I just introduced in the
ReadRecord() refactoring patch.
restore_command, if the connection to the primary server is lost. This
ensures that the standby can recover automatically, if the connection is
lost for a long time and standby falls behind so much that the required
WAL segments have been archived and deleted in the master.
This also makes standby_mode useful without streaming replication; the
server will keep retrying restore_command every few seconds until the
trigger file is found. That's the same basic functionality pg_standby
offers, but without the bells and whistles.
To implement that, refactor the ReadRecord/FetchRecord functions. The
FetchRecord() function introduced in the original streaming replication
patch is removed, and all the retry logic is now in a new function called
XLogReadPage(). XLogReadPage() is now responsible for executing
restore_command, launching walreceiver, and waiting for new WAL to arrive
from primary, as required.
This also changes the life cycle of walreceiver. When launched, it now only
tries to connect to the master once, and exits if the connection fails, or
is lost during streaming for any reason. The startup process detects the
death, and re-launches walreceiver if necessary.
woken by alarm we send SIGUSR1 to all backends requesting that they
check to see if they are blocking Startup process. If so, they throw
ERROR/FATAL as for other conflict resolutions. Deadlock stop gap
removed. max_standby_delay = -1 option removed to prevent deadlock.
that would've been WAL-logged if archiving was enabled. If we encounter
such records in archive recovery anyway, we know that some data is
missing from the log. A WARNING is emitted in that case.
Original patch by Fujii Masao, with changes by me.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
recovery instead of reading the backup history file. This is more robust,
as it stops you from prematurely starting up an inconsisten cluster if the
backup history file is lost for some reason, or if the base backup was
never finished with pg_stop_backup().
This also paves the way for a simpler streaming replication patch, which
doesn't need to care about backup history files anymore.
The backup history file is still created and archived as before, but it's
not used by the system anymore. It's just for informational purposes now.
Bump PG_CONTROL_VERSION as the location of the backup startpoint is now
written to a new field in pg_control, and catversion because initdb is
required
Original patch by Fujii Masao per Simon's idea, with further fixes by me.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
of checkpoint. Although the checkpoint has been written to WAL at that point
already, so that all data is safe, and we'll retry removing the WAL segment at
the next checkpoint, if such a failure persists we won't be able to remove any
other old WAL segments either and will eventually run out of disk space. It's
better to treat the failure as non-fatal, and move on to clean any other WAL
segment and continue with any other end-of-checkpoint cleanup.
We don't normally expect any such failures, but on Windows it can happen with
some anti-virus or backup software that lock files without FILE_SHARE_DELETE
flag.
Also, the loop in pgrename() to retry when the file is locked was broken. If a
file is locked on Windows, you get ERROR_SHARE_VIOLATION, not
ERROR_ACCESS_DENIED, at least on modern versions. Fix that, although I left
the check for ERROR_ACCESS_DENIED in there as well (presumably it was correct
in some environment), and added ERROR_LOCK_VIOLATION to be consistent with
similar checks in pgwin32_open(). Reduce the timeout on the loop from 30s to
10s, on the grounds that since it's been broken, we've effectively had a
timeout of 0s and no-one has complained, so a smaller timeout is actually
closer to the old behavior. A longer timeout would mean that if recycling a
WAL file fails because it's locked for some reason, InstallXLogFileSegment()
will hold ControlFileLock for longer, potentially blocking other backends, so
a long timeout isn't totally harmless.
While we're at it, set errno correctly in pgrename().
Backpatch to 8.2, which is the oldest version supported on Windows. The xlog.c
changes would make sense on other platforms and thus on older versions as
well, but since there's no such locking issues on other platforms, it's not
worth it.
file handle on it, the file goes into "pending deletion" state where it
still shows up in directory listing, but isn't accessible otherwise. That
confuses RemoveOldXLogFiles(), making it think that the file hasn't been
archived yet, while it actually was, and it was deleted along with the .done
file.
Fix that by renaming the file with ".deleted" extension before deleting it.
Also check the return value of rename() and unlink(), so that if the removal
fails for any reason (e.g another process is holding the file locked), we
don't delete the .done file until the WAL file is really gone.
Backpatch to 8.2, which is the oldest version supported on Windows.
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
XID) in checkpoint records. This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist. It should also simplify life for
hot-standby operation.
To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID. This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed. The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.
was incorrectly initialized with timeline ID 0. That rendered the WAL page
unrecoverable, making a subsequent archive recovery stop at that point.
ThisTimeLineID needs to be initialized before calling AdvanceXLInsertBuffer().
This fixes bug #5011 reported by James Bardin. Backpatch to 8.4, as the bug
was introduced by the changes to use of bgwriter for writing the
end-of-archive-recovery checkpoint. Patch by Tom Lane.
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
archive recovery. Invent a separate state variable and inquiry function
for XLogInsertAllowed() to clarify some tests and make the management of
writing the end-of-recovery checkpoint less klugy. Fix several places
that were incorrectly testing InRecovery when they should be looking at
RecoveryInProgress or XLogInsertAllowed (because they will now be executed
in the bgwriter not startup process). Clarify handling of bad LSNs passed
to XLogFlush during recovery. Use a spinlock for setting/testing
SharedRecoveryInProgress. Improve quite a lot of comments.
Heikki and Tom
during it:
When bgwriter is active, the startup process can't perform mdsync() correctly
because it won't see the fsync requests accumulated in bgwriter's private
pendingOpsTable. Therefore make bgwriter responsible for the end-of-recovery
checkpoint as well, when it's active.
When bgwriter is active (= archive recovery), the startup process must not
accumulate fsync requests to its own pendingOpsTable, since bgwriter won't
see them there when it performs restartpoints. Make startup process drop its
pendingOpsTable when bgwriter is launched to avoid that.
Update minimum recovery point one last time when leaving archive recovery.
It won't be updated by the end-of-recovery checkpoint because XLogFlush()
sees us as out of recovery already.
This fixes bug #4879 reported by Fujii Masao.
symbolic links with the -l option, and as Fujii Masao pointed out we ended up
overwriting files in the archive directory before this patch. Patch by
Aidan Van Dyk, Fujii Masao and me.
Backpatch to 8.3, where pg_standby was introduced.
copies?) to ensure they really don't run proc_exit/shmem_exit callbacks,
as was intended. I broke this behavior recently by installing atexit
callbacks without thinking about the one case where we truly don't want
to run those callback functions. Noted in an example from Dave Page.
is run at the end of archive recovery, providing a chance to do external
cleanup. Modify pg_standby so that it no longer removes the trigger file,
that is to be done using the recovery_end_command now.
Provide a "smart" failover mode in pg_standby, where we don't fail over
immediately, but only after recovering all unapplied WAL from the archive.
That gives you zero data loss assuming all WAL was archived before
failover, which is what most users of pg_standby actually want.
recovery_end_command by Simon Riggs, pg_standby changes by Fujii Masao and
myself.
you can end up with an unrecoverable backup if you start a new base backup
right after finishing archive recovery. In that scenario, the redo pointer of
the checkpoint that pg_start_backup() writes points to the XLOG segment where
the timeline-changing end-of-archive-recovery checkpoint is. The beginning
of that segment contains pages with the old timeline ID, and we don't accept
that in recovery unless we find a history file covering the old timeline ID.
If you omit pg_xlog from the base backup and clear the archive directory
before starting the backup, there will be no such history file available.
The bug is present in all versions since PITR was introduced in 8.0, but I'm
back-patching only back to 8.2. Earlier versions didn't have XLOG switch
records, making this fix unfeasible. Given the lack of reports until now,
it doesn't seem worthwhile to spend more effort to fix 8.0 and 8.1.
Per report and suggestion by Mikael Krantz
the checkpoint in immediate or lazy mode. This is to address complaints
that pg_start_backup() takes a long time even when there's no need to minimize
its I/O consumption.
some bufmgr probes, take out redundant and memory-leak-inducing path arguments
to smgr__md__read__done and smgr__md__write__done, fix bogus attempt to
recalculate space used in sort__done, clean up formatting in places where
I'm not sure pgindent will do a nice job by itself.
its usual buffer cleaning duties during archive recovery, and it's responsible
for performing restartpoints.
This requires some changes in postmaster. When the startup process has done
all the initialization and is ready to start WAL redo, it signals the
postmaster to launch the background writer. The postmaster is signaled again
when the point in recovery is reached where we know that the database is in
consistent state. Postmaster isn't interested in that at the moment, but
that's the point where we could let other backends in to perform read-only
queries. The postmaster is signaled third time when the recovery has ended,
so that postmaster knows that it's safe to start accepting connections.
The startup process now traps SIGTERM, and performs a "clean" shutdown. If
you do a fast shutdown during recovery, a shutdown restartpoint is performed,
like a shutdown checkpoint, and postmaster kills the processes cleanly. You
still have to continue the recovery at next startup, though.
Currently, the background writer is only launched during archive recovery.
We could launch it during crash recovery as well, but it seems better to keep
that codepath as simple as possible, for the sake of robustness. And it
couldn't do any restartpoints during crash recovery anyway, so it wouldn't be
that useful.
log_restartpoints is gone. Use log_checkpoints instead. This is yet to be
documented.
This whole operation is a pre-requisite for Hot Standby, but has some value of
its own whether the hot standby patch makes 8.4 or not.
Simon Riggs, with lots of modifications by me.
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
we can get some buildfarm feedback about whether that function is still
problematic. (Note that the planned async-preread patch will not really
prove anything one way or the other in buildfarm testing, since it will
be inactive with default GUC settings.)
includes a few new ones.
- Fixed compilation errors on OS X for probes that use typedefs
- Fixed a number of probes to pass ForkNumber per the relation forks
patch
- The new probes are those that were taken out from the previous
submitted patch and required simple fixes. Will submit the other probes
that may require more discussion in a separate patch.
Robert Lor
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
for pg_stop_backup. First, it is possible that the history file name is not
alphabetically later than the last WAL file name, so we should explicitly
check that both have been archived. Second, the previous coding would wait
forever if a checkpoint had managed to remove the WAL file before we look for
it.
Simon Riggs, plus some code cleanup by me.
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
SizeOfPageHeaderData instead of sizeof(PageHeaderData) in places where that
makes the code clearer, and avoid casting between Page and PageHeader where
possible. Zdenek Kotala, with some additional cleanup by Heikki Linnakangas.
I did not apply the parts of the proposed patch that would have resulted in
slightly changing the on-disk format of hash indexes; it seems to me that's
not a win as long as there's any chance of having in-place upgrade for 8.4.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
more logical that way, and also it reduces the amount of unnecessary includes
in bufpage.h, which is widely used.
Zdenek Kotala.
My previous patch to bufpage.h should also have credited him as author, but I
forgot (sorry about that).
Formerly, the default value of wal_sync_method was determined inside xlog.c,
but now it is determined inside guc.c. guc.c was reading xlogdefs.h
without having read <fcntl.h>, leading to wrong determination of
DEFAULT_SYNC_METHOD. Obviously xlogdefs.h needs to include <fcntl.h>
for itself to ensure stable results.
modes, replacing it with a call to a function that derives it from the
sync_method variable, now that it has distinct values for these two cases.
This means that assign_xlog_sync_method() no longer changes any settings,
thus fixing the bug introduced in the change to use a guc enum for
wal_sync_method.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.