If sendFileWithContent were used to send a file larger than the
bbsink buffer size, this would result in corruption. The only
files that are sent via sendFileWithContent are the backup label
file, the tablespace map file, and .done files for WAL segments
included in the backup. Of these, it seems that only the
tablespace_map file can become large enough to cause a problem,
and then only if you have a lot of tablespaces. If you do have
that situation, you might end up with a corrupted
tablespace_map file, which would be bad.
My commit bef47ff85d introduced
this problem.
Report and patch by Antonin Houska.
Discussion: http://postgr.es/m/15764.1670528645@antos
During ALTER TABLE execution, when prep-time handling of subcommands of
certain types determine that execution-time handling requires recursion,
they signal this by changing the subcommand type to a special value.
This can be done in a simpler way by using a separate flag introduced by
commit ec0925c22a, so do that.
Catversion bumped. It's not clear to me that ALTER TABLE subcommands
are stored anywhere in catalogs (CREATE FUNCTION rejects it in BEGIN
ATOMIC function bodies), but we do have both write and read support for
them, so be safe.
Discussion: https://postgr.es/m/20220929090033.zxuaezcdwh2fgfjb@alvherre.pgsql
3d14e17 has added support for this query but psql was not able to
complete it. Spotted while working on a different patch in the same
area.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/Y3hw7yvG0VwpC1jq@paquier.xyz
This is straightforward as far as it goes. However, it does not
attempt to trap errors occurring during the execution of domain
CHECK constraints. Since those are general user-defined
expressions, the only way to do that would involve starting up a
subtransaction for each check. Of course the entire point of
the soft-errors feature is to not need subtransactions, so that
would be self-defeating. For now, we'll rely on the assumption
that domain checks are written to avoid throwing errors.
Discussion: https://postgr.es/m/1181028.1670635727@sss.pgh.pa.us
This requires a bit of further infrastructure-extension to allow
trapping errors reported by numeric_in and pg_unicode_to_server,
but otherwise it's pretty straightforward.
In the case of jsonb_in, we are only capturing errors reported
during the initial "parse" phase. The value-construction phase
(JsonbValueToJsonb) can also throw errors if assorted implementation
limits are exceeded. We should improve that, but it seems like a
separable project.
Andrew Dunstan and Tom Lane
Discussion: https://postgr.es/m/3bac9841-fe07-713d-fa42-606c225567d6@dunslane.net
Formerly, semantic action functions for the JSON parser returned void,
so that there was no way for them to affect the parser's behavior.
That means in particular that they can't force an error exit except by
longjmp'ing. That won't do in the context of our project to make input
functions return errors softly. Hence, change them to return the same
JsonParseErrorType enum value as the parser itself uses. If an action
function returns anything besides JSON_SUCCESS, the parse is abandoned
and that error code is returned.
Action functions can thus easily return the same error conditions that
the parser already knows about. As an escape hatch for expansion, also
invent a code JSON_SEM_ACTION_FAILED that the core parser does not know
the exact meaning of. When returning this code, an action function
must use some out-of-band mechanism for reporting the error details.
This commit simply makes the API change and causes all the existing
action functions to return JSON_SUCCESS, so that there is no actual
change in behavior here. This is long enough and boring enough that
it seemed best to commit it separately from the changes that make
real use of the new mechanism.
In passing, remove a duplicate assignment of
transform_string_values_scalar.
Discussion: https://postgr.es/m/1436686.1670701118@sss.pgh.pa.us
We chose a specific wording of the not-implemented errors for
pseudotype I/O functions and other cases where there's little
value in implementing input and/or output. gtsvectorin never
got that memo though, nor did most of contrib. Make these all
fall in line, mostly because I'm a neatnik but also to remove
unnecessary translatable strings.
gbtreekey_in needs a bit of extra love since it supports
multiple SQL types. Sadly, gbtreekey_out doesn't have the
ability to do that, but I think it's unreachable anyway.
Noted while surveying datatype input functions to see what we
have left to fix.
Apparently anymultirange_in was written before we converted all
these pseudotype input functions to use a common macro, and it didn't
get fixed before committing. Sloppy merging probably explains its
unintuitive ordering, too, so rearrange.
Noted while surveying datatype input functions to see what we
have left to fix. I'm inclined to leave the pseudotypes as
throwing hard errors, because it's difficult to see a reason why
anyone would need something else. But in any case, if we want
to change that, we shouldn't have to change multiple copies of
the code.
9d9c02ccd added code to allow WindowAgg to take some shortcuts when a
monotonic WindowFunc reached some value that it could never come back
from due to the function's monotonic nature. That commit added a
runCondition field to WindowClause to store the condition which, when it
becomes false we can start taking shortcuts in nodeWindowAgg.c.
Here we fix an issue where subquery pullups didn't properly update the
runCondition to update the Vars to properly reference the new query level.
Here we also add a missing call to preprocess_expression() for the
WindowClause's runCondtion. The WindowFuncs in the targetlist will have
had this process done, so we must also do it for the WindowFuncs in the
runCondition so that they can be correctly found in the targetlist
during setrefs.c
Bug: #17709
Reported-by: Alexey Makhmutov
Author: Richard Guo, David Rowley
Discussion: https://postgr.es/m/17709-4f557160e3e8ee9a@postgresql.org
Backpatch-through: 15, where 9d9c02ccd was introduced
Buildfarm member wrasse has been complaining about empty declarations
as an effect of 8018ffb and 83a1a1b due to extra semicolons.
While on it, remove also the last backslash of the macros definitions,
causing more lines to be eaten in it than necessary, per comment from
Tom Lane.
Reported-by: Tom Lane, and buildfarm member wrasse
Author: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/1188769.1670640236@sss.pgh.pa.us
Replace the error trapping scheme introduced in 5bc450629 with our
shiny new errsave/ereturn mechanism. This doesn't have any real
functional impact (although I think that the new coding is able
to report a few more errors softly than v15 did). And I doubt
there's any measurable performance difference either. But this
gets rid of an ad-hoc, one-of-a-kind design in favor of a mechanism
that will be widely used going forward, so it should be a net win
for code readability.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
This patch converts the input functions for date, time, timetz,
timestamp, timestamptz, and interval to the new soft-error style.
There's some related stuff in formatting.c that remains to be
cleaned up, but that seems like a separable project.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Pay down some ancient technical debt (dating to commit 022fd9966):
fix a couple of places in datetime parsing that were throwing
ereport's immediately instead of returning a DTERR code that could be
interpreted by DateTimeParseError. The reason for that was that there
was no mechanism for passing any auxiliary data (such as a zone name)
to DateTimeParseError, and these errors seemed to really need it.
Up to now it didn't matter that much just where the error got thrown,
but now we'd like to have a hard policy that datetime parse errors
get thrown from just the one place.
Hence, invent a "DateTimeErrorExtra" struct that can be used to
carry any extra values needed for specific DTERR codes. Perhaps
in the future somebody will be motivated to use this to improve
the specificity of other DateTimeParseError messages, but for now
just deal with the timezone-error cases.
This is on the way to making the datetime input functions report
parse errors softly; but it's really an independent change, so
commit separately.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Previously the host operating system and 32/64 bit were not included and the
build machine's cpu was used, which is potentially wrong for cross builds.
Author: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAC+AXB16gwYhKCdS+t0pk3U7kKtpVj5L-ynmhK3Gbea330At3w@mail.gmail.com
More could be done in this line, but I just grabbed some low-hanging
fruit. Principal objective was to remove the need for several ugly
unconstify() usages in formatting.c.
This patch converts the input functions for bool, int2, int4, int8,
float4, float8, numeric, and contrib/cube to the new soft-error style.
array_in and record_in are also converted. There's lots more to do,
but this is enough to provide proof-of-concept that the soft-error
API is usable, as well as reference examples for how to convert
input functions.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
pg_input_is_valid() returns boolean, while pg_input_error_message()
returns the primary error message if the input is bad, or NULL
if the input is OK. The main reason for having two functions is
so that we can test both the details-wanted and the no-details-wanted
code paths.
Although these are primarily designed with testing in mind,
it could well be that they'll be useful to end users as well.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Postgres' standard mechanism for reporting errors (ereport() or elog())
is used for all sorts of error conditions. This means that throwing
an exception via ereport(ERROR) requires an expensive transaction or
subtransaction abort and cleanup, since the exception catcher dare not
make many assumptions about what has gone wrong. There are situations
where we would rather have a lighter-weight mechanism for dealing
with errors that are known to be safe to recover from without a full
transaction cleanup. This commit creates infrastructure to let us
adapt existing error-reporting code for that purpose. See the
included documentation changes for details. Follow-on commits will
provide test code and usage examples.
The near-term plan is to convert most if not all datatype input
functions to report invalid input "softly". This will enable
implementing some SQL/JSON features cleanly and without the cost
of subtransactions, and it will also allow creating COPY options
to deal with bad input without cancelling the whole COPY.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks also to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
The USER SET flag specifies that the variable should be set on behalf of an
ordinary role. That lets ordinary roles set placeholder variables, which
permission requirements are not known yet. Such a value wouldn't be used if
the variable finally appear to require superuser privileges.
The new flags are stored in the pg_db_role_setting.setuser array. Catversion
is bumped.
This commit is inspired by the previous work by Steve Chavez.
Discussion: https://postgr.es/m/CAPpHfdsLd6E--epnGqXENqLP6dLwuNZrPMcNYb3wJ87WR7UBOQ%40mail.gmail.com
Author: Alexander Korotkov, Steve Chavez
Reviewed-by: Pavel Borisov, Steve Chavez
Commit 7103ebb7aa added support for MERGE, which included support for
inheritance hierarchies, but didn't document the fact that ONLY could
be specified before the source and/or target tables to exclude tables
inheriting from the tables specified.
Update merge.sgml to mention this, and while at it, add some
regression tests to cover it.
Dean Rasheed, reviewed by Nathan Bossart.
Backpatch to 15, where MERGE was added.
Discussion: https://postgr.es/m/CAEZATCU0XM-bJCvpJuVRU3UYNRqEBS6g4-zH%3Dj9Ye0caX8F6uQ%40mail.gmail.com
Make the argument types of the File API match stdio better:
- Change the data buffer to void *, from char *.
- Change FileWrite() data buffer to const on top of that.
- Change amounts to size_t, from int.
In passing, change the FilePrefetch() amount argument from int to
off_t, to match the underlying posix_fadvise().
Discussion: https://www.postgresql.org/message-id/flat/11dda853-bb5b-59ba-a746-e168b1ce4bdb%40enterprisedb.com
In commit ffbb7e65a, I added a ModifyTableState member to ResultRelInfo
to save the owning ModifyTableState for use by nodeModifyTable.c when
performing batch inserts, but as pointed out by Tom Lane, that changed
the array stride of es_result_relations, and that would break any
previously-compiled extension code that accesses that array. Fix by
removing that member from ResultRelInfo and instead adding a List member
at the end of EState to save such ModifyTableStates.
Per report from Tom Lane. Back-patch to v14, like the previous commit;
I chose to apply the patch to HEAD as well, to make back-patching easy.
Discussion: http://postgr.es/m/4065383.1669395453%40sss.pgh.pa.us
The tests don't have much coverage of segment related code, as we don't create
large enough tables. To make it easier to test these paths, add a new option
specifying the segment size in blocks.
Set the new option to 6 blocks in one of the CI tasks. Smaller numbers
currently fail one of the tests, for understandable reasons.
While at it, fix some segment size related issues in the meson build.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20221107171355.c23fzwanfzq2pmgt@awork3.anarazel.de
After restart, we don't perform streaming of an in-progress transaction if
it was previously decoded and confirmed by the client. To achieve that we
were comparing the END location of the WAL record being decoded with the
WAL location we have already decoded and confirmed by the client. While
decoding the commit record, to decide whether to process and send the
complete transaction, we compare its START location with the WAL location
we have already decoded and confirmed by the client. Now, if we need to
queue some change in the transaction while decoding the commit record
(e.g. snapshot), it is possible that we decide to stream the transaction
but later commit processing decides to skip it. In such a case, we would
needlessly send the changes and later when we decide to skip it, we will
send stream abort.
We also sometimes decide to stream the changes when we actually just need
to process them locally like a change for invalidations. This will lead us
to send empty streams. To avoid this, while queuing each change for
decoding, we remember whether the transaction has any change that actually
needs to be sent downstream and use that information later to decide
whether to stream the transaction or not.
Note, we can't avoid all cases where we have to send empty streams like
the case where the plugin later decides that the change is not
publishable. However, we will no longer need to send stream_abort when we
skip sending a particular transaction.
Author: Dilip Kumar
Reviewed-by: Hou Zhijie, Ashutosh Bapat, Shi yu, Amit Kapila
Discussion: https://postgr.es/m/CAFiTN-tHK=7LzfrPs8fbT2ksrOJGQbzywcgXst2bM9-rJJAAUg@mail.gmail.com
To run all tests that support running against existing server:
$ meson test --setup running
To run just the main pg_regress tests against existing server:
$ meson test --setup running regress-running/regress
To ensure the 'running' setup continues to work, test it as part of the
freebsd CI task.
Discussion: https://postgr.es/m/CAH2-Wz=XDQcmLoo7RR_i6FKQdDmcyb9q5gStnfuuQXrOGhB2sQ@mail.gmail.com
Combine some duplicated code stanzas by creating small functions.
Most of these duplications arose at a time when I wouldn't have
trusted C compilers to auto-inline small functions intelligently,
but they're probably poor practice now. Similarly split out some
bits that aren't actually duplicative as the code stands, but would
become so after an upcoming patch to add another error-handling
code path.
Take the opportunity to add some lengthier comments about what
we're doing here, too. Re-order one function that seemed not
very well-placed.
Patch by me, per suggestions from Andres Freund.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Provide <sect2> subdivisions in 9.26 System Information Functions and
Operators. This is useful because it adds a mini-TOC at the top of
the page to aid jumping to portions of what's become quite a long
section. Also, now that several of the subsections contain multiple
tables, it's hard to see the overall structure without headings.
Discussion: https://postgr.es/m/4026789.1670426602@sss.pgh.pa.us
Generate a Makefile.global that's complete enough for PGXS to work for some
extensions. It is likely that this compatibility layer will not suffice for
every extension and not all platforms - we can expand it over time.
This allows extensions to use a single buildsystem across all the supported
postgres versions. Once all supported PG versions support meson, we can remove
the compatibility layer.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
Previously export_dynamic was set in src/makefiles/Makefile.$port. For solaris
this required exporting with_gnu_ld. The determination of with_gnu_ld would be
nontrivial to copy for meson PGXS compatibility. It's also nice to delete
libtool.m4.
This uses -Wl,--export-dynamic on all platforms, previously all platforms but
FreeBSD used -Wl,-E. The likelihood of a name conflict seems lower with the
longer spelling.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
The same code pattern is repeated 21 times for int64 counters (0 for
missing entry) and 5 times for doubles (0 for missing entry) on database
entries. This code is switched to use macros for the basic code
instead, shaving a few hundred lines of originally-duplicated code
patterns. The function names remain the same, but some fields of
PgStat_StatDBEntry have to be renamed to cope with the new style.
This is in the same spirit as 83a1a1b.
Author: Michael Paquier
Reviewed-by: Nathan Bossart, Bertrand Drouvot
Discussion: https://postgr.es/m/Y46stlxQ2LQE20Na@paquier.xyz
There likely are further issues, but as evidenced by the CI task proposed by
Justin in the referenced thread, this suffices to build and run basic tests in
cygwin (some fixes for the test infrastructure are needed, but that's
independent of the meson aspect).
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20221021034040.GT16921@telsasoft.com
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
9d9c02ccd added window "run conditions", which allows the evaluation of
monotonic window functions to be skipped when the run condition is no
longer true. Prior to this commit, once the run condition was no longer
true and we stopped evaluating the window functions, we simply just left
the ecxt_aggvalues[] and ecxt_aggnulls[] arrays alone to store whatever
value was stored there the last time the window function was evaluated.
Leaving a stale value in there isn't really a problem on 64-bit builds as
all of the window functions which we recognize as monotonic all return
int8, which is passed by value on 64-bit builds. However, on 32-bit
builds, this was a problem as the value stored in the ecxt_values[]
element would be a by-ref value and it would be pointing to some memory
which would get reset once the tuple context is destroyed. Since the
WindowAgg node will output these values in the resulting tupleslot, this
could be problematic for the top-level WindowAgg node which must look at
these values to filter out the rows that don't meet its filter condition.
Here we fix this by just zeroing the ecxt_aggvalues[] and setting the
ecxt_aggnulls[] array to true when the run condition first becomes false.
This results in the WindowAgg's output having NULLs for the WindowFunc's
columns rather than the stale or pointer pointing to possibly freed
memory. These tuples with the NULLs can only make it as far as the
top-level WindowAgg node before they're filtered out. To ensure that
these tuples *are* always filtered out, we now insist that OpExprs making
up the run condition are strict OpExprs. Currently, all the window
functions which the planner recognizes as monotonic return INT8 and the
operator which is used for the run condition must be a member of a btree
opclass. In reality, these restrictions exclude nothing that's built-in
to Postgres and are unlikely to exclude anyone's custom operators due to
the requirement that the operator is part of a btree opclass. It would be
unusual if those were not strict.
Reported-by: Sergey Shinderuk, using valgrind
Reviewed-by: Richard Guo, Sergey Shinderuk
Discussion: https://postgr.es/m/29184c50-429a-ebd7-f1fb-0589c6723a35@postgrespro.ru
Backpatch-through: 15, where 9d9c02ccd was added
The same code pattern is repeated 17 times for int64 counters (0 for
missing entry) and 5 times for timestamps (NULL for missing entry) on
table entries. This code is switched to use a macro for the basic code
instead, shaving a few hundred lines of originally-duplicated code. The
function names remain the same, but some fields of PgStat_StatTabEntry
have to be renamed to cope with the new style.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart
Discussion: https:/postgr.es/m/20221204173207.GA2669116@nathanxps13
Passing a NULL snapshot (InvalidSnapshot) is going to work but only as long
as the index can't find any matching rows. This can be confusing for
the extension authors, so add an explicit check for this argument. The check
is implemented with Assert() in order to avoid overhead in release builds.
Reported-by: Sven Klemm
Discussion: https://postgr.es/m/CAJ7c6TPxitD4vbKyP-mpmC1XwyHdPPqvjLzm%2BVpB88h8LGgneQ%40mail.gmail.com
Author: Aleksander Alekseev
Reviewed-by: Pavel Borisov
By default, the contents generated by the custom and directory dump
formats are compressed. However, with the existing test facility, the
restore program will succeed regardless of whether the dumped output was
compressed or not without checking if anything has been compressed.
This commit implements a portable way to check the contents of the
custom and directory dump formats:
- glob_patterns, that can be defined for each test as an array of
glob()-compilable strings, tracking the contents that should or should
not be compressed. While this is useful to make sure that the table
data is compressed, this also checks that blobs.toc and toc.dat are
never compressed.
- command_like, to execute a command on a dump and check its generated
output. This is used here in correlation with pg_restore -l to check if
the dumps have been compressed or not, depending on if the build
supports gzip, or not.
This hole in the tests has come up when working on 5e73a60, where
compression has to be applied by default, if available, for both dump
formats.
The idea of glob_patterns comes from me, and Georgios has come up with
the design for command_like.
Author: Georgios Kokolatos, Michael Paquier
Discussion: https://postgr.es/m/DQn4czCWR1rcbGPLL7p3LfEr5-kGmlySm-H05VgroINdikvhtS5r9EdI6b8D8sjnbKdJ09k-cxs2AqijBeHAWk9Q8gvEAxPRHuLRhwONcGc=@pm.me
Keeping the SQL commands that initdb runs in string arrays before
feeding them to PG_CMD_PUTS() seems unnecessarily verbose and
inflexible. In some cases, the array only has one member. In other
cases, one might want to use PG_CMD_PRINTF() instead, to parametrize a
command, but that would require breaking up the loop or using
workarounds like replace_token(). Unwind all that; it's much simpler
that way.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://www.postgresql.org/message-id/flat/2c50823b-f453-bb97-e38b-34751c51dcdf%40enterprisedb.com
A couple of places weren't up to speed for this. By sheer good
luck, we didn't fail but just selected a non-memoized join plan,
at least in the test case we have. Nonetheless, it's a bug,
and I'm not quite sure that it couldn't have worse consequences
in other examples. So back-patch to v14 where Memoize came in.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48GkNom272sfp0-WeD6_0HSR19BJ4H1c9ZKSfbVnJsvRg@mail.gmail.com
For historical reasons, pg_dump refers to large objects as "BLOBs".
This term is not used anywhere else in PostgreSQL, and it also means
something different in the SQL standard and other SQL systems.
This patch renames internal functions, code comments, documentation,
etc. to use the "large object" or "LO" terminology instead. There is
no functionality change, so the archive format still uses the name
"BLOB" for the archive entry. Additional long command-line options
are added with the new naming.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/868a381f-4650-9460-1726-1ffd39a270b4%40enterprisedb.com
The error messages reported during any failures while reading or
validating the header of a WAL currently includes only the offset of the
page but not the compiled LSN referring to the page, requiring an extra
step to compile it if looking at the surroundings with pg_waldump or
similar. Adding this information costs a bit in translation, but also
eases debugging.
Author: Bharath Rupireddy
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, Maxim Orlov, Michael
Paquier
Discussion: https://postgr.es/m/CALj2ACWV=FCddsxcGbVOA=cvPyMr75YCFbSQT6g4KDj=gcJK4g@mail.gmail.com
As pointed out by Dean Rasheed, we really should be using tmp >
-(PG_INTNN_MIN / 10) rather than tmp > (PG_INTNN_MAX / 10) for checking
for overflows in the accumulation in the pg_strtointNN functions. This
does happen to be the same number when dividing by 10, but there is a
pending patch which adds other bases and this is not the same number if we
were to divide by 2 rather than 10, for example. If the base 2 parsing
was to follow this example then we could accidentally think a string
containing the value of PG_INT32_MIN was an overflow in pg_strtoint32.
Clearly that shouldn't overflow.
This does not fix any actual live bugs, only some bad examples of overflow
checks for future bases.
Reported-by: Dean Rasheed
Discussion: https://postgr.es/m/CAEZATCVEtwfhdm-K-etZYFB0=qsR0nT6qXta_W+GQx4RYph1dg@mail.gmail.com
Jeff Davis
Robert Haas
Peter Eisentraut
Alvaro Herrera
Michael Paquier
Tom Lane
David Rowley
Andres Freund
Alexander Korotkov
Dean Rasheed
Etsuro Fujita
Amit Kapila