Justin Pryzby reported that some scenarios could cause gathering
of extended statistics to spend many seconds in an un-cancelable
qsort() operation. To fix, invent qsort_interruptible(), which is
just like qsort_arg() except that it will also do CHECK_FOR_INTERRUPTS
every so often. This bloats the backend by a couple of kB, which
seems like a good investment. (We considered just enabling
CHECK_FOR_INTERRUPTS in the existing qsort and qsort_arg functions,
but there are some callers for which that'd demonstrably be unsafe.
Opt-in seems like a better way.)
For now, just apply qsort_interruptible() in statistics collection.
There's probably more places where it could be useful, but we can
always change other call sites as we find problems.
Back-patch to v14. Before that we didn't have extended stats on
expressions, so that the problem was less severe. Also, this patch
depends on the sort_template infrastructure introduced in v14.
Tom Lane and Justin Pryzby
Discussion: https://postgr.es/m/20220509000108.GQ28830@telsasoft.com
There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
All the code paths simplified here were already using a boolean or used
an expression that led to zero or one, making the extra bits
unnecessary.
Author: Justin Pryzby
Reviewed-by: Tom Lane, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/20210428182936.GE27406@telsasoft.com
Several places were performing a tight loop to determine the first power
of 2 number that's > or >= the required memory. Instead of using a loop
for that, we can use pg_nextpower2_32 or pg_nextpower2_64. When we need a
power of 2 number equal to or greater than a given amount, we just pass
the amount to the nextpower2 function. When we need a power of 2 greater
than the amount, we just pass the amount + 1.
Additionally, in tsearch there were a couple of locations that were
performing a while loop when a simple "if" would have done. In both of
these locations only 1 item is being added, so the loop could only have
ever iterated once. Changing the loop into an if statement makes the code
very slightly more optimal as the condition is checked once rather than
twice.
There are quite a few remaining locations that increase the size of the
buffer in the following form:
while (reqsize >= buflen)
{
buflen *= 2;
buf = repalloc(buf, buflen);
}
These are not touched in this commit. repalloc will error out for sizes
larger than MaxAllocSize. Changing these to use pg_nextpower2_32 would
remove the chance of that error being raised. It's unclear from the code
if the sizes could ever become that large, so err on the side of caution.
Discussion: https://postgr.es/m/CAApHDvp=tns7RL4PH0ZR0M+M-YFLquK7218x=0B_zO+DbOma+w@mail.gmail.com
Reviewed-by: Zhihong Yu
The text search cache mechanisms assume that we can clean up
an invalidated dictionary cache entry simply by resetting the
associated long-lived memory context. However, that does not work
for ispell affixes that make use of regular expressions, because
the regex library deals in plain old malloc. Hence, we leaked
compiled regex(es) any time we dropped such a cache entry. That
could quickly add up, since even a fairly trivial regex can use up
tens of kB, and a large one can eat megabytes. Add a memory context
callback to ensure that a regex gets freed when its owning cache
entry is cleared.
Found via valgrind testing.
This problem is ancient, so back-patch to all supported branches.
Discussion: https://postgr.es/m/3816764.1616104288@sss.pgh.pa.us
When to_tsquery() or websearch_to_tsquery() meet a complex morph containing
multiple words residing adjacent position, these words are connected
with OP_AND operator. That leads to surprising results. For instace,
both websearch_to_tsquery('"pg_class pg"') and to_tsquery('pg_class <-> pg')
produce '( pg & class ) <-> pg' tsquery. This tsquery requires
'pg' and 'class' words to reside on the same position and doesn't match
to to_tsvector('pg_class pg'). It appears to be ridiculous behavior, which
needs to be fixed.
This commit makes to_tsquery() or websearch_to_tsquery() connect words
residing adjacent position with OP_PHRASE. Therefore, now those words are
normally chained with other OP_PHRASE operator. The examples of above now
produces 'pg <-> class <-> pg' tsquery, which matches to
to_tsvector('pg_class pg').
Another effect of this commit is that complex morph word positions now need to
match the tsvector even if there is no surrounding OP_PHRASE. This behavior
change generally looks like an improvement but making this commit not
backpatchable.
Reported-by: Barry Pederson
Bug: #16592
Discussion: https://postgr.es/m/16592-70b110ff9731c07d@postgresql.org
Discussion: https://postgr.es/m/CAPpHfdv0EzVhf6CWfB1_TTZqXV_2Sn-jSY3zSd7ePH%3D-%2B1V2DQ%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane, Neil Chen
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
Commit fbeb9da22, which added the tsearch_readline APIs, left
t_readline() in place as a compatibility measure. But that function
has been unused and deprecated for twelve years now, so that seems
like enough time to remove it. Doing so, and merging t_readline's
code into tsearch_readline, aids in making several useful
improvements:
* The hard-wired 4K limit on line length in tsearch data files is
removed, by using a StringInfo buffer instead of a fixed-size buffer.
* We can buy back the per-line palloc/pfree added by 3ea7e9550
in the common case where encoding conversion is not required.
* We no longer need a separate pg_verify_mbstr call, as that
functionality was folded into encoding conversion some time ago.
(We could have done some of this stuff while keeping t_readline as a
separate API, but there seems little point, since there's no reason
for anyone to still be using t_readline directly.)
Discussion: https://postgr.es/m/48A4FA71-524E-41B9-953A-FD04EF36E2E7@yesql.se
tsearch_readline() saves the string pointer it returns to the caller
for possible use in the associated error context callback. However,
the caller will usually pfree that string sometime before it next
calls tsearch_readline(), so that there is a window where an ereport
will try to print an already-freed string.
The built-in users of tsearch_readline() happen to all do that pfree
at the bottoms of their loops, so that the window is effectively
empty for them. However, this is not documented as a requirement,
and contrib/dict_xsyn doesn't do it like that, so it seems likely
that third-party dictionaries might have live bugs here.
The practical consequences of this seem pretty limited in any case,
since production builds wouldn't clobber the freed string immediately,
besides which you'd not expect syntax errors in dictionary files
being used in production. Still, it's clearly a bug waiting to bite
somebody.
Fix by pstrdup'ing the string to be saved for the error callback,
and then pfree'ing it next time through. It's been like this for
a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/48A4FA71-524E-41B9-953A-FD04EF36E2E7@yesql.se
The new hlCover() algorithm that I introduced in commit c9b0c678d
turns out to potentially take O(N^2) or worse time on long documents,
if there are many occurrences of individual query words but few or no
substrings that actually satisfy the query. (One way to hit this
behavior is with a "common_word & rare_word" type of query.) This
seems unavoidable given the original goal of checking every substring
of the document, so we have to back off that idea. Fortunately, it
seems unlikely that anyone would really want headlines spanning all of
a long document, so we can avoid the worse-than-linear behavior by
imposing a maximum length of substring that we'll consider.
For now, just hard-wire that maximum length as a multiple of max_words
times max_fragments. Perhaps at some point somebody will argue for
exposing it as a ts_headline parameter, but I'm hesitant to make such
a feature addition in a back-patched bug fix.
I also noted that the hlFirstIndex() function I'd added in that
commit was unnecessarily stupid: it really only needs to check whether
a HeadlineWordEntry's item pointer is null or not. This wouldn't make
all that much difference in typical cases with queries having just
a few terms, but a cycle shaved is a cycle earned.
In addition, add a CHECK_FOR_INTERRUPTS call in TS_execute_recurse.
This ensures that hlCover's loop is cancellable if it manages to take
a long time, and it may protect some other TS_execute callers as well.
Back-patch to 9.6 as the previous commit was. I also chose to add the
CHECK_FOR_INTERRUPTS call to 9.5. The old hlCover() algorithm seems
to avoid the O(N^2) behavior, at least on the test case I tried, but
nonetheless it's not very quick on a long document.
Per report from Stephen Frost.
Discussion: https://postgr.es/m/20200724160535.GW12375@tamriel.snowman.net
Text search sometimes failed to find valid matches, for instance
'!crew:A'::tsquery might fail to locate 'crew:1B'::tsvector during
an index search. The root of the issue is that TS_execute's callback
functions were not changed to use ternary (yes/no/maybe) reporting
when we made the search logic itself do so. It's somewhat annoying
to break that API, but on the other hand we now see that any code
using plain boolean logic is almost certainly broken since the
addition of phrase search. There seem to be very few outside callers
of this code anyway, so we'll just break them intentionally to get
them to adapt.
This allows removal of tsginidx.c's private re-implementation of
TS_execute, since that's now entirely duplicative. It's also no
longer necessary to avoid use of CALC_NOT in tsgistidx.c, since
the underlying callbacks can now do something reasonable.
Back-patch into v13. We can't change this in stable branches,
but it seems not quite too late to fix it in v13.
Tom Lane and Pavel Borisov
Discussion: https://postgr.es/m/CALT9ZEE-aLotzBg-pOp2GFTesGWVYzXA3=mZKzRDa_OKnLF7Mg@mail.gmail.com
Commit 54cd4f045 added some kluges to work around an old glibc bug,
namely that %.*s could misbehave if glibc thought any characters in
the supplied string were incorrectly encoded. Now that we use our
own snprintf.c implementation, we need not worry about that bug (even
if it still exists in the wild). Revert a couple of particularly
ugly hacks, and remove or improve assorted comments.
Note that there can still be encoding-related hazards here: blindly
clipping at a fixed length risks producing wrongly-encoded output
if the clip splits a multibyte character. However, code that's
doing correct multibyte-aware clipping doesn't really need a comment
about that, while code that isn't needs an explanation why not,
rather than a red-herring comment about an obsolete bug.
Discussion: https://postgr.es/m/279428.1593373684@sss.pgh.pa.us
Suppress a probably-meaningless uninitialized-variable warning
(induced by my previous patch, I'm sorry to say).
Improve mark_hl_fragments()'s test for overlapping cover strings:
it failed to consider the possibility that the current string is
strictly within another one. That's unlikely given the preceding
splitting into MaxWords fragments, but I don't think it's impossible.
Discussion: https://postgr.es/m/16345-2e0cf5cddbdcd3b4@postgresql.org
This code could produce very poor results when asked to highlight a
string based on a query using phrase-match operators. The root cause
is that hlCover(), which is supposed to find a minimal substring that
matches the query, was written assuming that word position is not
significant. I'm only 95% convinced that its algorithm was correct even
for plain AND/OR queries; but it definitely fails completely for phrase
matches, causing it to possibly not identify a cover string at all.
Hence, rewrite hlCover() with a less-tense algorithm that just tries
all the possible substrings, earlier and shorter ones first. (This is
not as bad as it sounds performance-wise, because all of the string
matching has been done already: the repeated tsquery match checks
boil down to pointer comparisons.)
Unfortunately, since that approach produces more candidate cover
strings than before, it also exposes that there were bugs in the
heuristics in mark_hl_words() for selecting a best cover string.
Fixes there include:
* Do not apply the ShortWord filter to words that appear in the query.
* Remove a misguided optimization for quickly rejecting a cover.
* Fix order-of-operation bug that could cause computation of a
wrong figure of merit (poslen) when shortening a cover.
* Change the preference rule so that candidate headlines that do not
include their whole cover string (after MaxWords trimming) are lowest
priority, since they may not actually satisfy the user's query.
This results in some changes in existing regression test cases,
but they all seem reasonable. Note in particular that the tests
involving strings like "1 2 3" were previously being affected by
the ShortWord filter, masking the normal matching behavior.
Per bug #16345 from Augustinas Jokubauskas; the new test cases are
based on that example. Back-patch to 9.6 where phrase search was
added to tsquery.
Discussion: https://postgr.es/m/16345-2e0cf5cddbdcd3b4@postgresql.org
This code was woefully unreadable and under-commented. Try to improve
matters by adding comments, using some macros to make complicated
if-tests more readable, using boolean type where appropriate, etc.
There are a couple of tiny coding improvements too, but this commit
includes (I hope) no behavioral change.
Nonetheless, back-patch as far as 9.6, because a followup bug-fixing
commit depends on this.
Discussion: https://postgr.es/m/16345-2e0cf5cddbdcd3b4@postgresql.org
We don't need to manually clean up allocations in a SRF's
multi_call_memory_ctx, because the SRF_RETURN_DONE infrastructure
takes care of that (and also ensures that it will happen even if the
function never gets a final call, which simple manual cleanup cannot
do).
Hence, the code removed by this patch is a waste of code and cycles.
Worse, it gives the impression that cleaning up manually is a thing,
which can lead to more serious errors such as those fixed in
commits 085b6b667 and b4570d33a. So we should get rid of it.
These are not quite actual bugs though, so I couldn't muster the
enthusiasm to back-patch. Fix in HEAD only.
Justin Pryzby
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
The major change here is that we no longer include jsonb.h into
jsonapi.h. The reason that was necessary is that jsonapi.h included
several prototypes functions in jsonfuncs.c that depend on the Jsonb
type. Move those prototypes to a new header, jsonfuncs.h, and include
it where needed.
The other change is that JsonEncodeDateTime is now declared in
json.h rather than jsonapi.h.
Taken together, these steps eliminate all dependencies of jsonapi.h
on backend-only data types and header files, so that it can
potentially be included in frontend code.
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Commit 8af1624e3 introduced a warning about possibly returning
without a value, on compilers that don't realize that ereport(ERROR)
doesn't return. Tweak the code to avoid that.
Per buildfarm. Back-patch to 9.6, like the aforesaid commit.
Using incorrect, or just mismatched, dictionary and affix files
could result in a crash, due to failure to cross-check offsets
obtained from the file. Add necessary validation, as well as
some Asserts for future-proofing.
Per bug #16050 from Alexander Lakhin. Back-patch to 9.6 where the
problem was introduced.
Arthur Zakirov, per initial investigation by Tomas Vondra
Discussion: https://postgr.es/m/16050-024ae722464ab604@postgresql.org
Discussion: https://postgr.es/m/20191013012610.2p2fp3zzpoav7jzf@development
Such calls can confuse the reader as strcmp() uses an integer as result.
The places patched here have been spotted by Thomas Munro, David Rowley
and myself.
Author: Michael Paquier
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/20190411021946.GG2728@paquier.xyz
... as well as its implementation from backend/access/hash/hashfunc.c to
backend/utils/hash/hashfn.c.
access/hash is the place for the hash index AM, not really appropriate
for generic facilities, which is what hash_any is; having things the old
way meant that anything using hash_any had to include the AM's include
file, pointlessly polluting its namespace with unrelated, unnecessary
cruft.
Also move the HTEqual strategy number to access/stratnum.h from
access/hash.h.
To avoid breaking third-party extension code, add an #include
"utils/hashutils.h" to access/hash.h. (An easily removed line by
committers who enjoy their asbestos suits to protect them from angry
extension authors.)
Discussion: https://postgr.es/m/201901251935.ser5e4h6djt2@alvherre.pgsql
When we first put in collations support, we basically punted on teaching
pg_statistic, ANALYZE, and the planner selectivity functions about that.
They've just used DEFAULT_COLLATION_OID independently of the actual
collation of the data. It's time to improve that, so:
* Add columns to pg_statistic that record the specific collation associated
with each statistics slot.
* Teach ANALYZE to use the column's actual collation when comparing values
for statistical purposes, and record this in the appropriate slot. (Note
that type-specific typanalyze functions are now expected to fill
stats->stacoll with the appropriate collation, too.)
* Teach assorted selectivity functions to use the actual collation of
the stats they are looking at, instead of just assuming it's
DEFAULT_COLLATION_OID.
This should give noticeably better results in selectivity estimates for
columns with nondefault collations, at least for query clauses that use
that same collation (which would be the default behavior in most cases).
It's still true that comparisons with explicit COLLATE clauses different
from the stored data's collation won't be well-estimated, but that's no
worse than before. Also, this patch does make the first step towards
doing better with that, which is that it's now theoretically possible to
collect stats for a collation other than the column's own collation.
Patch by me; thanks to Peter Eisentraut for review.
Discussion: https://postgr.es/m/14706.1544630227@sss.pgh.pa.us
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
On Windows, in UTF8 database encoding, what char2wchar() produces is
UTF16 not UTF32, ie, characters above U+FFFF will be represented by
surrogate pairs. t_isdigit() and siblings did not account for this
and failed to provide a large enough result buffer. That in turn
led to bogus "invalid multibyte character for locale" errors, because
contrary to what you might think from char2wchar()'s documentation,
its Windows code path doesn't cope sanely with buffer overflow.
The solution for t_isdigit() and siblings is pretty clear: provide
a 3-wchar_t result buffer not 2.
char2wchar() also needs some work to provide more consistent, and more
accurately documented, buffer overrun behavior. But that's a bigger job
and it doesn't actually have any immediate payoff, so leave it for later.
Per bug #15476 from Kenji Uno, who deserves credit for identifying the
cause of the problem. Back-patch to all active branches.
Discussion: https://postgr.es/m/15476-4314f480acf0f114@postgresql.org
As benchmarks show, using libc's string-to-integer conversion is
pretty slow. At least part of the reason for that is that strtol[l]
have to be more generic than what largely is required inside pg.
This patch considerably speeds up int2/int4 input (int8 already was
already using hand-rolled code).
Most of the existing pg_atoi callers have been converted. But as one
requires pg_atoi's custom delimiter functionality, and as it seems
likely that there's external pg_atoi users, it seems sensible to just
keep pg_atoi around.
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20171208214437.qgn6zdltyq5hmjpk@alap3.anarazel.de
In passing, throw an error if the AF count is too small, rather than
just silently discarding extra affix entries.
Note that the new regression test cases require installing the
updated src/backend/tsearch/dicts files.
Arthur Zakirov
Discussion: https://postgr.es/m/20180413113447.GA32474@zakirov.localdomain
NISortAffixes() compared successive compound affixes incorrectly,
thus possibly failing to merge identical affixes, or (less likely)
merging ones that shouldn't be merged. The user-visible effects
of this are unclear, to me anyway.
Per bug #15150 from Alexander Lakhin. It's been broken for a long time,
so back-patch to all supported branches.
Arthur Zakirov
Discussion: https://postgr.es/m/152353327780.31225.13445405496721177988@wrigleys.postgresql.org
Jsonb has a complex nature so there isn't best-for-everything way to convert it
to tsvector for full text search. Current to_tsvector(json(b)) suggests to
convert only string values, but it's possible to index keys, numerics and even
booleans value. To solve that json(b)_to_tsvector has a second required
argument contained a list of desired types of json fields. Second argument is
a jsonb scalar or array right now with possibility to add new options in a
future.
Bump catalog version
Author: Dmitry Dolgov with some editorization by me
Reviewed by: Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CA+q6zcXJQbS1b4kJ_HeAOoOc=unfnOrUEL=KGgE32QKDww7d8g@mail.gmail.com
Error-tolerant conversion function with web-like syntax for search query,
it simplifies constraining search engine with close to habitual interface for
users.
Bump catalog version
Authors: Victor Drobny, Dmitry Ivanov with editorization by me
Reviewed by: Aleksander Alekseev, Tomas Vondra, Thomas Munro, Aleksandr Parfenov
Discussion: https://www.postgresql.org/message-id/flat/fe931111ff7e9ad79196486ada79e268@postgrespro.ru
We have a lot of code in which option names, which from the user's
viewpoint are logically keywords, are passed through the grammar as plain
identifiers, and then matched to string literals during command execution.
This approach avoids making words into lexer keywords unnecessarily. Some
places matched these strings using plain strcmp, some using pg_strcasecmp.
But the latter should be unnecessary since identifiers would have been
downcased on their way through the parser. Aside from any efficiency
concerns (probably not a big factor), the lack of consistency in this area
creates a hazard of subtle bugs due to different places coming to different
conclusions about whether two option names are the same or different.
Hence, standardize on using strcmp() to match any option names that are
expected to have been fed through the parser.
This does create a user-visible behavioral change, which is that while
formerly all of these would work:
alter table foo set (fillfactor = 50);
alter table foo set (FillFactor = 50);
alter table foo set ("fillfactor" = 50);
alter table foo set ("FillFactor" = 50);
now the last case will fail because that double-quoted identifier is
different from the others. However, none of our documentation says that
you can use a quoted identifier in such contexts at all, and we should
discourage doing so since it would break if we ever decide to parse such
constructs as true lexer keywords rather than poor man's substitutes.
So this shouldn't create a significant compatibility issue for users.
Daniel Gustafsson, reviewed by Michael Paquier, small changes by me
Discussion: https://postgr.es/m/29405B24-564E-476B-98C0-677A29805B84@yesql.se
Tom Lane
Peter Eisentraut
Alvaro Herrera
David Rowley
Bruce Momjian
Michael Paquier
Alexander Korotkov
Robert Haas
Amit Kapila
Andres Freund
Teodor Sigaev