part of service principal. If not set, any service principal matching
an entry in the keytab can be used.
NEW KERBEROS MATCHING BEHAVIOR FOR 8.1.
Todd Kover
postgresql.conf.
---------------------------------------------------------------------------
Here's an updated version of the patch, with the following changes:
1) No longer uses "service name" as "application version". It's instead
hardcoded as "postgres". It could be argued that this part should be
backpatched to 8.0, but it doesn't make a big difference until you can
start changing it with GUC / connection parameters. This change only
affects kerberos 5, not 4.
2) Now downcases kerberos usernames when the client is running on win32.
3) Adds guc option for "krb_caseins_users" to make the server ignore
case mismatch which is required by some KDCs such as Active Directory.
Off by default, per discussion with Tom. This change only affects
kerberos 5, not 4.
4) Updated so it doesn't conflict with the rendevouz/bonjour patch
already in ;-)
Magnus Hagander
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
its presence. This amounts to desupporting Kerberos 5 releases 1.0.*,
which is small loss, and simplifies use of our Kerberos code on platforms
with Red-Hat-style include file layouts. Per gripe from John Gray and
followup discussion.
modes (and replace the requiressl boolean). The four options were first
spelled out by Magnus Hagander <mha@sollentuna.net> on 2000-08-23 in email
to pgsql-hackers, archived here:
http://archives.postgresql.org/pgsql-hackers/2000-08/msg00639.php
My original less-flexible patch and the ensuing thread are archived at:
http://dbforums.com/t623845.html
Attached is a new patch, including documentation.
To sum up, there's a new client parameter "sslmode" and environment
variable "PGSSLMODE", with these options:
sslmode description
------- -----------
disable Unencrypted non-SSL only
allow Negotiate, prefer non-SSL
prefer Negotiate, prefer SSL (default)
require Require SSL
The only change to the server is a new pg_hba.conf line type,
"hostnossl", for specifying connections that are not allowed to use SSL
(for example, to prevent servers on a local network from accidentally
using SSL and wasting cycles). Thus the 3 pg_hba.conf line types are:
pg_hba.conf line types
----------------------
host applies to either SSL or regular connections
hostssl applies only to SSL connections
hostnossl applies only to regular connections
These client and server options, the postgresql.conf ssl = false option,
and finally the possibility of compiling with no SSL support at all,
make quite a range of combinations to test. I threw together a test
script to try many of them out. It's in a separate tarball with its
config files, a patch to psql so it'll announce SSL connections even in
absence of a tty, and the test output. The test is especially informative
when run on the same tty the postmaster was started on, so the FATAL:
errors during negotiation are interleaved with the psql client output.
I saw Tom write that new submissions for 7.4 have to be in before midnight
local time, and since I'm on the east coast in the US, this just makes it
in before the bell. :)
Jon Jensen
was modified for IPv6. Use a robust definition of struct sockaddr_storage,
do a proper configure test to see if ss_len exists, don't assume that
getnameinfo() will handle AF_UNIX sockets, don't trust getaddrinfo to
return the protocol we ask for, etc. This incorporates several outstanding
patches from Kurt Roeckx, but I'm to blame for anything that doesn't
work ...
> http://developer.postgresql.org/cvsweb.cgi/pgsql-server/src/include/libpq/pqcomm.h.diff?r1=1.85&r2=1.86
>
> modified SockAddr, but no corresponding change was made here
> (fe-auth.c:612):
>
> case AUTH_REQ_KRB5:
> #ifdef KRB5
> if (pg_krb5_sendauth(PQerrormsg, conn->sock, &conn->laddr.in,
> &conn->raddr.in,
> hostname) != STATUS_OK)
>
> It's not obvious to me what the change ought to be though.
This patch should hopefully fix both kerberos 4 and 5.
Kurt Roeckx
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
postgresql version 7.3, but yea... this patch adds full IPv6
support to postgres. I've tested it out on 7.2.3 and has
been running perfectly stable.
CREDITS:
The KAME Project (Initial patch)
Nigel Kukard <nkukard@lbsd.net>
Johan Jordaan <johanj@lando.co.za>
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
when to send what to which, prevent recursion by introducing new COMMERROR
elog level for client-communication problems, get rid of direct writes
to stderr in backend/libpq files, prevent non-error elogs from going to
client during the authentication cycle.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
> and that the right fix is to make each of the subsequent calls be in
> this same pattern, not to try to emulate their nonsensical style.
Dominic J. Eidson
authentication failed' and a 'send() failed: Broken pipe' message
on every connection from psql in password auth mode. Problem is
that psql doesn't ask user for a password until it sees a password
challenge failure, and libpq just closes the connection unceremoniously
if it's challenged for a password when it hasn't got one to send.
Accordingly, EOF from the client after asking for a password is
normal behavior and should not result in postmaster log entries.
> pam_strerror() should be used a few more times, rather than just saying
> "Error!". Also, the configure.in snippet seems wrong. You add
> -I$pam_prefix/include/security to $INCLUDES and then you #include
> <security/pam_appl.h>. This whole thing is probably unnecessary, since
> PAM is a system library on the systems where it exists, so the headers
> and libraries are found automatically, unlike OpenSSL and
> Kerberos.
See attached revised patch. (I'm sure the configure.in stuff can be done
right/better, I'm just not enough of a autoconf guru to know what to
change it to.)
Dominic J. Eidson
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
system supports SO_PEERCRED requests for Unix sockets. This is an
amalgamation of patches submitted by Helge Bahmann and Oliver Elphick,
with some editorializing by yours truly.
a new postmaster child process. This should eliminate problems with
authentication blocking (e.g., ident, SSL init) and also reduce problems
with the accept queue filling up under heavy load.
The option to send elog output to a different file per backend (postgres -o)
has been disabled for now because the initialization would have to happen
in a different order and it's not clear we want to keep this anyway.
(rather than compile time). For libpq, even when Kerberos support is
compiled in, the default user name should still fall back to geteuid()
if it can't be determined via the Kerberos system.
A couple of fixes for string type configuration parameters, now that there
is one.
files to restrict the set of users that can connect to a database
but can still use the pg_shadow password. (You just leave off the
password field in the secondary file.)
Most (nearly all) of the work was done by David Wragg <dpw@doc.ic.ac.uk>
He patched 6.5.3. I've updated it for 7.0RC5.
It works for MIT kerberos 1.1.1 (and previously for 1.0.6 as well).
I've got the patch against 6.5.3, plus kerberized RPMS.
Mike Wyer <mw@doc.ic.ac.uk> || "Woof?"
When drawing up a very simple "text-drawing" of how the negotiation is done,
I realised I had done this last part (fallback) in a very stupid way. Patch
#4 fixes this, and does it in a much better way.
Included is also the simple text-drawing of how the negotiation is done.
//Magnus
authentifica
tion
working with postgresql-6.4.2 and KTH-KRB Ebones
(http://www.pdc.kth.se/kth-kr
b) on a dec alpha running DU 4.0D using the native compiler. The
following
patch does the trick.
The rationale behind this is as follows. The KTH-KRB code header files
defines
lots of lengths like INST_SZ,REALM_SZ and KRB_SENDAUTH_VLEN. It also has
a
habit of doing things like
chararray[LENGTH] = '\0'
to ensure null terminated strings. In my instance this just happens to
blat
the kerberos principal instance string leading to error like
pg_krb4_recvauth: kerberos error: Can't decode authenticator
(krb_rd_req
)
The application code that comes with KTH-KRB uses "KRB_SENDAUTH_VLEN +
1" and
sometimes uses "INST_SZ + 1" so it seems safest to put that 1 char
buffer in
the appropriate place.
Rodney McDuff
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
have > 20000 users and each (potentially) needs a separate database
which is > only accessible to them. Rather than having 20000 lines
in pg_hba.conf, > I've patched Postgres so that the special token
"sameuser" in the > database field of pg_hba.conf allows access
only to the username which > is connecting.
Neil Conway
Bruce Momjian
Tom Lane
PostgreSQL Daemon
Peter Eisentraut
Dennis Bjorklund
Marc G. Fournier