When due to publication configuration, a TRUNCATE change ends up with
zero tables to be published, don't send the message out, just skip it.
It's not wrong, but obviously useless overhead.
jsonb uses numeric internally, and numeric can store NaN, but that is
not allowed by jsonb on input, so we shouldn't store it. Also prevent
infinity to get a consistent error message. (numeric input would reject
infinity anyway.)
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
This code is evidently allocating memory and thus confusing matters
even more. Let's see whether we can learn anything with
just VirtualQuery.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
This morning's results from buildfarm member dory make it pretty
clear that something is getting mapped into the just-freed space,
but not what that something is. Replace my minimalistic probes
with a full dump of the process address space and module space,
based on Noah's work at
<20170403065106.GA2624300%40tornado.leadboat.com>
This is all (probably) to get reverted once we have fixed the
problem, but for now we need information.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
While looking at a recent buildfarm failure in the ecpg tests, I wondered
why the pg_regress output claimed the stderr part of the test failed, when
the regression diffs were clearly for the stdout part. Looking into it,
the reason is that pg_regress.c's logic for iterating over three parallel
lists is wrong, and has been wrong since it was written: it advances the
"tag" pointer at a different place in the loop than the other two pointers.
Fix that.
After some thought about the info captured so far, it seems possible
that MapViewOfFileEx is itself causing some DLL to get loaded into
the space just freed by VirtualFree. The previous commit here didn't
capture enough info to really prove the case for that, so let's add
one more VirtualQuery in between those steps. Also, be sure to
capture the post-Map state before we emit any log entries, just in
case elog() is invoking some code not previously loaded.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
Buildfarm results show that the modern POSIX rule that 1 ^ NaN = 1 is not
honored on *BSD until relatively recently, and really old platforms don't
believe that NaN ^ 0 = 1 either. (This is unsurprising, perhaps, since
SUSv2 doesn't require either behavior.) In hopes of getting to platform
independent behavior, let's deal with all the NaN-input cases explicitly
in dpow().
Note that numeric_power() doesn't know either of these special cases.
But since that behavior is platform-independent, I think it should be
addressed separately, and probably not back-patched.
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A73E741@BPXM05GP.gisp.nec.co.jp
DST law changes in Palestine and Antarctica (Casey Station). Historical
corrections for Portugal and its colonies, as well as Enderbury, Jamaica,
Turks & Caicos Islands, and Uruguay.
Per spec, the result of power() should be NaN if either input is NaN.
It appears that on some versions of Windows, the libc function does
return NaN, but it also sets errno = EDOM, confusing our code that
attempts to work around shortcomings of other platforms. Hence, add
guard tests to avoid substituting a wrong result for the right one.
It's been like this for a long time (and the odd behavior only appears
in older MSVC releases, too) so back-patch to all supported branches.
Dang Minh Huong, reviewed by David Rowley
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A73E741@BPXM05GP.gisp.nec.co.jp
The point of this is not really to remove redundancy in pg_language.dat;
with only three entries, it's hardly worth it. Rather, it is to get
to a point where there are exactly zero hard-coded numeric pg_proc OID
references in the catalog .dat files. The lanvalidator column was the
only remaining location of such references, and it seems like a good
thing for future-proofing reasons to make it not be a special case.
There are still a few places in the .dat files with numeric OID references
to other catalogs, but after review I don't see any that seem worth
changing at present. In each case there are just too few entries to make
it worth the trouble to create lookup infrastructure.
This doesn't change the emitted postgres.bki file, so no catversion bump.
This change makes this module act more like most of our other low-level
resource management modules. It's a caller error if something is not
explicitly closed by the end of a successful transaction, so issue
a WARNING about it. This would not actually have caught the file leak
bug fixed in commit 231bcd080, because that was in a transaction-abort
path; but it still seems like a good, and pretty cheap, cross-check.
Discussion: https://postgr.es/m/152056616579.4966.583293218357089052@wrigleys.postgresql.org
Use the same code we already applied in duplicate_oids and unused_oids
to let this script find Catalog.pm without help. This removes the need
to supply a -I switch in most cases.
Also, mark the script executable, again to follow the precedent of
duplicate_oids and unused_oids. Now you can just do
"./reformat_dat_file.pl pg_proc.dat"
if you want to reformat only one or a few .dat files rather than all.
It'd be possible to remove the -I switches in the Makefile's convenience
targets, but I chose to leave them: they don't hurt anything, and it's
possible that in weird VPATH situations they might be of value.
I (tgl) originally coded the special case for pg_proc.pronargs as
though it were a kind of default value. It seems better though to
treat computable columns as an independent concern: this makes the
code clearer, and probably a bit faster too since we needn't do
work inside the per-column loop.
Improve related comments, as well, in the expectation that there
might be more cases like this in future.
John Naylor, some additional comment-hacking by me
Discussion: https://postgr.es/m/CAJVSVGW-D7OobzU=dybVT2JqZAx-4X1yvBJdavBmqQL05Q6CLw@mail.gmail.com
Apparently $(foreach ... $(call install_llvm_module,...)) doesn't work
too well without a blank line ending the install_llvm_module macro.
The previous coding hackishly dodged this problem with some parens,
but that's not really a good solution because make misunderstands
where the command boundaries are that way.
Discussion: https://postgr.es/m/20180428073935.GB1736@paquier.xyz
Don't put comments inside the macros, per complaint from Michael Paquier.
Quote target directory path with single quotes, not double; that seems
to be our project standard. Not quoting it at all definitely isn't
per standard.
Remove excess slash in one instance of path.
Remove useless semicolon.
Discussion: https://postgr.es/m/20180428073935.GB1736@paquier.xyz
Identify pg_replication_origin as a shared catalog in catalogs.sgml,
using the same boilerplate wording used for most other shared catalogs
(and tweak another place where someone had randomly deviated from
that boilerplate).
Make an example in mmgr/README more consistent with surrounding text.
Update an obsolete cross-reference in a comment in storage/block.h.
Zhuo Ql
Discussion: https://postgr.es/m/44296255.1819230.1524889719001@mail.yahoo.com
Add some debug printouts focused on the idea that MapViewOfFileEx might
be rounding its virtual memory allocation up more than we expect (and,
in particular, more than VirtualAllocEx does).
Once we've seen what this reports in one of the failures on buildfarm
members dory or jacana, we might revert this ... or perhaps just
decrease the log level.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
Commit b75f467b6e removed the LogicalTapeAssignReadBufferSize() function,
but forgot to update this comment. The read buffer size is an argument to
LogicalTapeRewindForRead() now. Doesn't seem worth going into the details
in the file header comment, so remove the outdated sentence altogether.
Update typedefs.list from current buildfarm results. Adjust pgindent's
typedef blacklist to block some more unfortunate typedef names that have
snuck in since last time. Manually tweak a few places where I didn't
like the initial results of pgindent'ing.
In the wake of commit 5602265f7, we were doing duplicate-OID detection
quite inefficiently, by invoking duplicate_oids which does all the same
parsing of catalog headers and .dat files as genbki.pl does. That adds
under half a second on modern machines, but quite a bit more on slow
buildfarm critters, so it seems worth avoiding. Let's just extend
genbki.pl a little so it can also detect duplicate OIDs, and remove
the duplicate_oids call from the build process.
(This also means that duplicate OID detection will happen during
Windows builds, which AFAICS it didn't before.)
This makes the use-case for duplicate_oids a bit dubious, but it's
possible that people will still want to run that check without doing
a whole build run, so let's keep that script.
In passing, move down genbki.pl's creation of its temp output files
so that it doesn't happen until after we've done parsing and validation
of the input. This avoids leaving a lot of clutter around after a
failure.
John Naylor and Tom Lane
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
Previously, you had to cd into src/include/catalog before running either
of these scripts. That's a bit tedious, so let's make the scripts do it
for you.
In passing, improve the initial comments in both scripts. Also remove
unused_oids' code to complain about duplicate oids. That was added in
yesterday's commit 5602265f7, but on second thought we shouldn't be
randomly redefining the script's behavior that way.
John Naylor and Tom Lane
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
The predecessor test boiled down to "PQserverVersion(NULL) >= 100000",
which is always false. No release includes that, so it could not have
reintroduced CVE-2018-1058. Back-patch to 9.4, like the addition of the
predecessor in commit 8d2814f274.
Discussion: https://postgr.es/m/20180422215551.GB2676194@rfd.leadboat.com
unused_oids was previously a shell script, which of course didn't work at
all on Windows. Also, commit 372728b0d introduced some other portability
problems, as complained of by Stas Kelvich. We can improve matters by
converting it to Perl.
While we're at it, let's future-proof both this script and duplicate_oids
to use Catalog.pm rather than having a bunch of ad-hoc logic for parsing
catalog headers and .dat files. These scripts are thereby a bit slower,
which doesn't seem like a problem for typical manual use. It is a little
annoying for buildfarm purposes, but we should be able to fix that case
by having genbki.pl make the check instead of parsing the headers twice.
(That's not done in this commit, though.)
Stas Kelvich, adjusted a bit by me
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
Instead of immediately constructing the string we need to emit into the
.BKI file, preserve the items we extracted from the header file in a hash.
This eases using the info for other purposes.
John Naylor (with cosmetic adjustments by me)
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
Commit 0927d2f46d didn't check that
consider_parallel was set for the target relation or account for
the possibility that required_outer might be non-empty.
To prevent future bugs of this ilk, add some assertions to
add_partial_path and do a bit of future-proofing of the code
recently added to recurse_set_operations.
Report by Andreas Seltenreich. Patch by Jeevan Chalke. Review
by Amit Kapila and by me.
Discussion: http://postgr.es/m/CAM2+6=U+9otsyF2fYB8x_2TBeHTR90itarqW=qAEjN-kHaC7kw@mail.gmail.com
Also use palloc0() for main amcheck state, and adjust a few comments.
Somehow I pushed old version of patch in commit
4eaf7eaccb, so commit the difference.
Peter Geoghegan
When bt_index_parent_check() is called with the heapallindexed option,
allocate a second Bloom filter to fingerprint block numbers that appear
in the downlinks of internal pages. Use Bloom filter probes when
walking the B-Tree to detect missing downlinks. This can detect subtle
problems with page deletion/VACUUM, such as corruption caused by the bug
just fixed in commit 6db4b499.
The downlink Bloom filter is bound in size by work_mem. Its optimal
size is typically far smaller than that of the regular heapallindexed
Bloom filter, especially when the index has high fan-out.
Author: Peter Geoghegan
Reviewer: Teodor Sigaev
Discussion: https://postgr.es/m/CAH2-WznUzY4fWTjm1tBB3JpVz8cCfz7k_qVp5BhuPyhivmWJFg@mail.gmail.com
Remove the words "if not already done." This obsolete wording
corresponds to an early development version of what became edd44738bc.
Author: Etsuro Fujita
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/5ADF117B.5030606@lab.ntt.co.jp
Instead of doing ExecInitExpr every time a Param needs to be evaluated
in run-time partition pruning, do it once during run-time pruning
set-up and cache the exprstate in PartitionPruneContext, saving a lot of
work.
Author: David Rowley
Reviewed-by: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f8-x+q-90QAPDu_okhQBV4DPEtPz8CJ=m0940GyT4DA4w@mail.gmail.com
This controls both plan-time and execution-time new-style partition
pruning. While finer-grain control is possible (maybe using an enum GUC
instead of boolean), there doesn't seem to be much need for that.
This new parameter controls partition pruning for all queries:
trivially, SELECT queries that affect partitioned tables are naturally
under its control since they are using the new technology. However,
while UPDATE/DELETE queries do not use the new code, we make the new GUC
control their behavior also (stealing control from
constraint_exclusion), because it is more natural, and it leads to a
more natural transition to the future in which those queries will also
use the new pruning code.
Constraint exclusion still controls pruning for regular inheritance
situations (those not involving partitioned tables).
Author: David Rowley
Review: Amit Langote, Ashutosh Bapat, Justin Pryzby, David G. Johnston
Discussion: https://postgr.es/m/CAKJS1f_0HwsxJG9m+nzU+CizxSdGtfe6iF_ykPYBiYft302DCw@mail.gmail.com
Previously, you could partition by a boolean column as long as you
spelled the bound values as string literals, for instance FOR VALUES
IN ('t'). The trouble with this is that ruleutils.c printed that as
FOR VALUES IN (TRUE), which is reasonable syntax but wasn't accepted by
the grammar. That results in dump-and-reload failures for such cases.
Apply a minimal fix that just causes TRUE and FALSE to be converted to
strings 'true' and 'false'. This is pretty grotty, but it's too late for
a more principled fix in v11 (to say nothing of v10). We should revisit
the whole issue of how partition bound values are parsed for v12.
Amit Langote
Discussion: https://postgr.es/m/e05c5162-1103-7e37-d1ab-6de3e0afaf70@lab.ntt.co.jp
Set Emacs's perl-continued-statement-offset to match perltidy's
--continuation-indentation, which is 2 (not overridden in PostgreSQL's
profile) rather than the 4 that Emacs uses by default.
Peter Eisentraut
Tom Lane
Andrew Dunstan
Heikki Linnakangas
Bruce Momjian
Noah Misch
Robert Haas
Teodor Sigaev
Magnus Hagander
Alvaro Herrera