Declaring this in the client-visible header ecpglib.h was a pretty
poor decision. It's not meant to be application-callable (and if
it was, putting it outside the extern "C" { ... } wrapper means
that C++ clients would fail to call it). And the declaration would
not even compile for a client, anyway, since it would not have the
macro pg_attribute_format_arg(). Fortunately, it seems that no
clients have tried to include this header with ENABLE_NLS defined,
or we'd have gotten complaints about that. But we have no business
putting such a restriction on client code.
Move the declaration to ecpglib_extern.h, since in fact nothing
outside src/interfaces/ecpg/ecpglib/ needs to call it.
The practical effect of this is just that clients can now safely
#include ecpglib.h while having ENABLE_NLS defined, but that seems
like enough of a reason to back-patch it.
Discussion: https://postgr.es/m/20590.1573069709@sss.pgh.pa.us
SET CONSTRAINTS ... DEFERRED failed on partitioned tables, because of a
sanity check that ensures that the affected constraints have triggers.
On partitioned tables, the triggers are in the leaf partitions, not in
the partitioned relations themselves, so the sanity check fails.
Removing the sanity check solves the problem, because the code needed to
support the case is already there.
Backpatch to 11.
Note: deferred unique constraints are not affected by this bug, because
they do have triggers in the parent partitioned table. I did not add a
test for this scenario.
Discussion: https://postgr.es/m/20191105212915.GA11324@alvherre.pgsql
This patch adopts the overflow check logic introduced by commit cbdb8b4c0
into two more places. interval_mul() failed to notice if it computed a
new microseconds value that was one more than INT64_MAX, and pgbench's
double-to-int64 logic had the same sorts of edge-case problems that
cbdb8b4c0 fixed in the core code.
To make this easier to get right in future, put the guts of the checks
into new macros in c.h, and add commentary about how to use the macros
correctly.
Back-patch to all supported branches, as we did with the previous fix.
Yuya Watari
Discussion: https://postgr.es/m/CAJ2pMkbkkFw2hb9Qb1Zj8d06EhWAQXFLy73St4qWv6aX=vqnjw@mail.gmail.com
If there is the WAL page that the continuation WAL record just fits within
(i.e., the continuation record ends just at the end of the page) and
the LSN in such page is specified with -s option, previously pg_waldump
caused an assertion failure. The cause of this assertion failure was that
XLogFindNextRecord() that pg_waldump -s calls mistakenly handled
such special WAL page.
This commit changes XLogFindNextRecord() so that it can handle
such WAL page correctly.
Back-patch to all supported versions.
Author: Andrey Lepikhov
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/99303554-5dd5-06e6-f943-b3005ccd6edd@postgrespro.ru
When sending data for logical decoding using the streaming replication
protocol via a WAL sender, the timestamp of the sent write message is
allocated at the beginning of the message when preparing for the write,
and actually computed when the write message is ready to be sent.
The timestamp was getting computed after sending the message. This
impacts anything using logical decoding, causing for example logical
replication to report mostly NULL for last_msg_send_time in
pg_stat_subscription.
This commit makes sure that the timestamp is computed before sending the
message. This is wrong since 5a991ef, so backpatch down to 9.4.
Author: Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1z=WMn8jt7iEdC5sYNaPgAgOASb_OW5JYv-vMdYaJSL-w@mail.gmail.com
Backpatch-through: 9.4
WindowAgg will potentially store large numbers of input rows into
tuplestores to allow access to other rows in the frame. If the input
is coming via an explicit Sort node, then unneeded columns will
already have been discarded (since Sort requests a small tlist); but
there are idioms like COUNT(*) OVER () that result in the input not
being sorted at all, and cases where the input is being sorted by some
means other than a Sort; if we don't request a small tlist, then
WindowAgg's storage requirement is inflated by the unneeded columns.
Backpatch back to 9.6, where the current tlist handling was added.
(Prior to that, WindowAgg would always use a small tlist.)
Discussion: https://postgr.es/m/87a7ator8n.fsf@news-spur.riddles.org.uk
For a long time (since commit aed378e8d) we have had a policy to log
nothing about a connection if the client disconnects when challenged
for a password. This is because libpq-using clients will typically
do that, and then come back for a new connection attempt once they've
collected a password from their user, so that logging the abandoned
connection attempt will just result in log spam. However, this did
not work well for PAM authentication: the bottom-level function
pam_passwd_conv_proc() was on board with it, but we logged messages
at higher levels anyway, for lack of any reporting mechanism.
Add a flag and tweak the logic so that the case is silent, as it is
for other password-using auth mechanisms.
Per complaint from Yoann La Cancellera. It's been like this for awhile,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/CACP=ajbrFFYUrLyJBLV8=q+eNCapa1xDEyvXhMoYrNphs-xqPw@mail.gmail.com
get_relkind_objtype, and hence get_object_type, failed when applied to a
toast table. This is not a good thing, because it prevents reporting of
perfectly legitimate permissions errors. (At present, these functions
are in fact *only* used to determine the ObjectType argument for
acl_error() calls.) It seems best to have them fall back to returning
OBJECT_TABLE in every case where they can't determine an object type
for a pg_class entry, so do that.
In passing, make some edits to alter.c to make it more obvious that
those calls of get_object_type() are used only for error reporting.
This might save a few cycles in the non-error code path, too.
Back-patch to v11 where this issue originated.
John Hsu, Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/C652D3DF-2B0C-4128-9420-FB5379F6B1E4@amazon.com
Starting with PostgreSQL 12, pg_restore refuses to run when neither -d
nor -f are specified (c.f. commit 413ccaa74d), and it also makes "-f -"
mean the old implicit behavior of dumping to stdout. However, older
branches write to a file called ./- when invoked like that, making it
impossible to write pg_restore scripts that work across versions. This
is a partial backpatch of the aforementioned commit to all older
supported branches, providing an upgrade path.
Discussion: https://postgr.es/m/20191006190839.GE18030@telsasoft.com
This clarifies more how to use and how to take advantage of constraints
when attaching a new partition.
Author: Justin Pryzby
Reviewed-by: Amit Langote, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20191028001207.GB23808@telsasoft.com
Backpatch-through: 10
The code only compared two triggers' names and namespaces (the latter
being the owning table's schema). This could result in falling back
to an OID-based sort of similarly-named triggers on different tables.
We prefer to avoid that, so add a comparison of the table names too.
(The sort order is thus table namespace, trigger name, table name,
which is a bit odd, but it doesn't seem worth contorting the code
to work around that.)
Likewise for policy objects, in 9.5 and up.
Complaint and fix by Benjie Gillam. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAMThMzEEt2mvBbPgCaZ1Ap1N-moGn=Edxmadddjq89WG4NpPtQ@mail.gmail.com
Rearrange the logic in record_image_cmp() and record_image_eq() to
error out on unexpected typlens (either not supported there or
completely invalid due to corruption). Barring corruption, this is
not possible today but it seems more future-proof and robust to fix
this.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Commit 8af1624e3 introduced a warning about possibly returning
without a value, on compilers that don't realize that ereport(ERROR)
doesn't return. Tweak the code to avoid that.
Per buildfarm. Back-patch to 9.6, like the aforesaid commit.
Using incorrect, or just mismatched, dictionary and affix files
could result in a crash, due to failure to cross-check offsets
obtained from the file. Add necessary validation, as well as
some Asserts for future-proofing.
Per bug #16050 from Alexander Lakhin. Back-patch to 9.6 where the
problem was introduced.
Arthur Zakirov, per initial investigation by Tomas Vondra
Discussion: https://postgr.es/m/16050-024ae722464ab604@postgresql.org
Discussion: https://postgr.es/m/20191013012610.2p2fp3zzpoav7jzf@development
When using CREATE TABLE for a new partition, the partitioned indexes of
the parent are created automatically in a fashion similar to LIKE
INDEXES. The new partition and its parent use a mapping for attribute
numbers for this operation, and while the mapping was correctly built,
its length was defined as the number of attributes of the newly-created
child, and not the parent. If the parent includes dropped columns, this
could cause failures.
This is wrong since 8b08f7d which has introduced the concept of
partitioned indexes, so backpatch down to 11.
Reported-by: Wyatt Alt
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/CAGem3qCcRmhbs4jYMkenYNfP2kEusDXvTfw-q+eOhM0zTceG-g@mail.gmail.com
Backpatch-through: 11
When a backend exits, it gets deleted from the syncrep queue if present.
The queue was checked without SyncRepLock taken in exclusive mode, so it
would have been possible for a backend to remove itself after a WAL
sender already did the job. Fix this issue based on a suggestion from
Fujii Masao, by first checking the queue without the lock. Then, if the
backend is present in the queue, take the lock and perform an additional
lookup check before doing the element deletion.
Author: Dongming Liu
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/a0806273-8bbb-43b3-bbe1-c45a58f6ae21.lingce.ldm@alibaba-inc.com
Backpatch-through: 9.4
The additional newline seems to have accidentally been introduced in
2c03216d83, in 9.5. The newline is only issued when an FPW is
present for the block reference.
While there could be an argument that removing the newlines in the
back branches could cause a problem for somebody parsing the
pg_waldump output, the likelihood of that seems small enough. It seems
at least equally likely that the randomness of when newlines are
issued causes problems.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029233341.4gnyau7e5v2lh5sc@alap3.anarazel.de
Backpatch: 9.5, like 2c03216d83.
It appears that libxml2 doesn't bother to set the "children" field of
an XML_NAMESPACE_DECL node to null; that field just contains garbage.
In v10 and v11, this can result in a crash in XMLTABLE(). The rewrite
done in commit 251cf2e27 fixed this, somewhat accidentally, in v12.
We're not going to back-patch 251cf2e27, however. The case apparently
doesn't have wide use, so rather than risk introducing other problems,
just add a safety check to throw an error.
Even though no bug manifests in v12/HEAD, add the relevant test case
there too, to prevent future regressions.
Chapman Flack (per private report)
Any callback set would have no meaning in the context of an exception.
As an autovacuum worker exits quickly in this context, this could be
only an issue within EmitErrorReport(), where the elog hook is for
example called. That's unlikely to going to be a problem, but let's be
clean and consistent with other code paths handling exceptions. This is
present since 2909419, which introduced autovacuum.
Author: Ashwin Agrawal
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALfoeisM+_+dgmAdAOHAu0k-ZpEHHqSSG=GRf3pKJGm8OqWX0w@mail.gmail.com
Backpatch-through: 9.4
It emerges that recent versions of Windows (at least 2016 Standard)
spell this locale name as "Norwegian Bokmål_Norway.1252", defeating
our mapping code that translates "Norwegian (Bokmål)_Norway" to
something that's all-ASCII (cf commits db29620d4 and aa1d2fc5e).
Add another mapping entry to handle this spelling.
Per bug #16068 from Robert Ford. Like the previous patches,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16068-4cb6eeaa7eb46d93@postgresql.org
On recent Red Hat platforms (at least RHEL 8 and Fedora 30, maybe older),
configure's probe for libperl failed if the user forces CFLAGS to be -O0.
This is because some code in perl's inline.h fails to be optimized away
at -O0, and said code doesn't work if compiled without -fPIC.
To fix, add CFLAGS_SL to the compile flags used during the libperl probe.
This is a better simulation of the way that plperl is built, anyway,
so it might forestall other issues in future.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
since people might want to build older branches on these platforms.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
Move the platform-dependent logic that sets CFLAGS_SL from
src/makefiles/Makefile.foo to src/template/foo, so that the value
is determined at configure time and thus is available while running
configure's tests.
On a couple of platforms this might save a few microseconds of build
time by eliminating a test that make otherwise has to do over and over.
Otherwise it's pretty much a wash for build purposes; in particular,
this makes no difference to anyone who might be overriding CFLAGS_SL
via a make option.
This patch in itself does nothing with the value and thus should not
change any behavior, though you'll probably have to re-run configure
to get a correctly updated Makefile.global. We'll use the new
configure variable in a follow-on patch.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
because the follow-on patch is a portability bug fix.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
Without "b", a variant of the tas() code miscompiles on macOS 10.4.
This may also fix a compilation failure involving macOS 10.1. Today's
compilers have been allocating acceptable registers with or without this
change, but this future-proofs the code by precisely conveying the
acceptable registers. Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20191009063900.GA4066266@rfd.leadboat.com
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
The timestamp tracking the last moment a message is received in a
logical replication worker was initialized in each loop checking if a
message was received or not, causing wal_receiver_timeout to be ignored
in basically any logical replication deployments. This also broke the
ping sent to the server when reaching half of wal_receiver_timeout.
This simply moves the initialization of the timestamp out of the apply
loop to the beginning of LogicalRepApplyLoop().
Reported-by: Jehan-Guillaume De Rorthais
Author: Julien Rouhaud
Discussion: https://postgr.es/m/CAOBaU_ZHESFcWva8jLjtZdCLspMj7vqaB2k++rjHLY897ZxbYw@mail.gmail.com
Backpatch-through: 10
Logical walsender should exit when it catches up with sending WAL during
shutdown; but there was a rare corner case when it failed to because of
a race condition that puts it back to wait for more WAL instead -- but
since there wasn't any, it'd not shut down immediately. It would only
continue the shutdown when wal_sender_timeout terminates the sleep,
which causes annoying waits during shutdown procedure. Restructure the
code so that we no longer forget to set WalSndCaughtUp in that case.
This was an oversight in commit c6c333436.
Backpatch all the way down to 9.4.
Author: Craig Ringer, Álvaro Herrera
Discussion: https://postgr.es/m/CAMsr+YEuz4XwZX_QmnX_-2530XhyAmnK=zCmicEnq1vLr0aZ-g@mail.gmail.com
Otherwise it can be hard to see where an error is coming from, when
the parallel worker sets all the GUCs that it received from the
leader. Bug #15726. Back-patch to 9.5, where RestoreGUCState()
appeared.
Reported-by: Tiago Anastacio
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/15726-6d67e4fa14f027b3%40postgresql.org
Commits 801c2dc7 and 801c2dc7 made it possible for vacuum to
try to freeze a multixact that is still running. That was
prevented by a check, but raised an error. Repair.
Back-patch all the way.
Author: Nathan Bossart, Jeremy Schneider
Reported-by: Jeremy Schneider
Reviewed-by: Jim Nasby, Thomas Munro
Discussion: https://postgr.es/m/DAFB8AFF-2F05-4E33-AD7F-FF8B0F760C17%40amazon.com
The pg_upgrade check for pg_catalog.unknown type when upgrading from 9.6
had a couple of issues with domains and composite types - it detected
even composite types unused in objects with storage. So for example this
was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE unknown_composite AS (u pg_catalog.unknown)
On the other hand, this only happened with composite types directly on
the pg_catalog.unknown data type, but not with a domain. So this was not
detected
CREATE DOMAIN unknown_domain AS pg_catalog.unknown;
CREATE TYPE unknown_composite_2 AS (u unknown_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.unknown type through a domain. So we missed cases like this
CREATE TABLE t (u unknown_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. Backpatch all
the way to 10, where the of pg_catalog.unknown data type was restricted.
Author: Tomas Vondra
Backpatch-to: 10-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
The pg_upgrade check for pg_catalog.line data type when upgrading from
9.3 had a couple of issues with domains and composite types. Firstly, it
triggered false positives for composite types unused in objects with
storage. This was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE line_composite AS (l pg_catalog.line)
On the other hand, this only happened with composite types directly on
the pg_catalog.line data type, but not with a domain. So this was not
detected
CREATE DOMAIN line_domain AS pg_catalog.line;
CREATE TYPE line_composite_2 AS (l line_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.line data type through a domain. So we missed cases like this
CREATE TABLE t (l line_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. 9.3 did not
support domains on composite types, but we can still have multi-level
composite types.
Backpatch all the way to 9.4, where the format for pg_catalog.line data
type changed.
Author: Tomas Vondra
Backpatch-to: 9.4-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
This fixes multiple areas of the documentation:
- COPY for its past compatibility section.
- SET ROLE mentioning INHERITS instead of INHERIT
- PREPARE referring to stmt_name, that is not present.
- Extension documentation about format name with upgrade scripts.
Backpatch down to 9.4 for the relevant parts.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/bf95233a-9943-b341-e2ff-a860c28af481@gmail.com
Backpatch-through: 9.4
With xlc v16.1.0, it causes internal compiler errors. With xlc versions
not exhibiting that bug, removing -qsrcmsg merely changes the compiler
error reporting format. Back-patch to 9.4 (all supported versions).
Discussion: https://postgr.es/m/20191003064105.GA3955242@rfd.leadboat.com
The file descriptor was opened with read-only to fsync a regular file,
which would cause EBADFD errors on some platforms.
This is similar to the recent fix done by a586cc4b (which was broken by
me with 82a5649), except that I noticed this issue while monitoring the
backend code for similar mistakes. Backpatch to 9.4, as this has been
introduced since logical decoding exists as of b89e151.
Author: Michael Paquier
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20191006045548.GA14532@paquier.xyz
Backpatch-through: 9.4
The postmaster's code path for spawning a bgworker neglected to check
whether we already have the max number of live child processes. That's
a bit hard to hit, since it would necessarily be a transient condition;
but if we do, AssignPostmasterChildSlot() fails causing a postmaster
crash, as seen in a report from Bhargav Kamineni.
To fix, invoke canAcceptConnections() in the bgworker code path, as we
do in the other code paths that spawn children. Since we don't want
the same pmState tests in this case, add a child-process-type parameter
to canAcceptConnections() so that it can know what to do.
Back-patch to 9.5. In principle the same hazard exists in 9.4, but the
code is enough different that this patch wouldn't quite fix it there.
Given the tiny usage of bgworkers in that branch it doesn't seem worth
creating a variant patch for it.
Discussion: https://postgr.es/m/18733.1570382257@sss.pgh.pa.us
This prints the unexpected value in more failure cases, and it removes
forty-eight hand-maintained error messages. Back-patch to 9.5, which
introduced these tests.
Reviewed (in an earlier version) by Andres Freund.
Discussion: https://postgr.es/m/20190915160021.GA24376@alvherre.pgsql
This would be all right, maybe, if it didn't also match a file that
definitely should not be ignored. We don't add rmgrs so often that
manual maintenance of this file list is impractical, so just write
out the list.
(I find the equivalent wildcard use in the Makefile pretty lazy and
unsafe as well, but will leave that alone until it actually causes a
problem.)
Per bug #16042 from Denis Stuchalin.
Discussion: https://postgr.es/m/16042-c174ee692ac21cbd@postgresql.org
One of the upsert related tests is unstable (sometimes even hanging
until isolationtester's step timeout is reached). Based on preliminary
analysis that might be a problem outside of just that test, but not
really related to EPQ and triggers. Disable for now, to get the
buildfarm greener again.
Discussion: https://postgr.es/m/20191004222437.45qmglpto43pd3jb@alap3.anarazel.de
Backpatch: 9.6-, just like c884119950.
As evidenced by bug #16036 this area is woefully under-tested. Add
fairly extensive tests for the combination.
Backpatch back to 9.6 - before that isolationtester was not capable
enough. While we don't backpatch tests all the time, future fixes to
trigger.c would potentially look different enough in 12+ from the
earlier branches that introducing bugs during backpatching is more
likely than normal. Also, it's just a crucial and undertested area of
the code.
Author: Andres Freund
Discussion: https://postgr.es/m/16036-28184c90d952fb7f@postgresql.org
Backpatch: 9.6-, the earliest these tests work
First, make sure that the .exe name is quoted when trying to get the
version number. Also, don't quote the lib name for using in the project
files if it's already been quoted. This second change applies to all
libraries, not just OpenSSL.
This has clearly been broken forever, so backpatch to all live branches.
Commit 5ac0d9360 failed to entirely fix bitshiftright's habit of
leaving one-bits in the pad space that should be all zeroes,
because in a moment of sheer brain fade I'd concluded that only
the code path used for not-a-multiple-of-8 shift distances needed
to be fixed. Of course, a multiple-of-8 shift distance can also
cause the problem, so we need to forcibly zero the extra bits
in both cases.
Per bug #16037 from Alexander Lakhin. As before, back-patch to all
supported branches.
Discussion: https://postgr.es/m/16037-1d1ebca564db54f4@postgresql.org