When installing binaries and libraries using the MSVC installation
routines, the operation gets done after moving to the root folder, whose
location is detected by checking if "configure" exists two times in a
row. So, calling the installation script from src/tools/msvc/ with an
extra "configure" file four levels up the root path of the code tree
causes the execution to go further up, leading to a failure in finding
the builds. This commit fixes the issue by moving to the root folder of
the code tree only once, when necessary.
Author: Arnold Müller
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/16343-f638f67e7e52b86c@postgresql.org
Backpatch-through: 9.5
The description missed a comma and lacked an explanation of what happens
with REPLICA IDENTITY USING INDEX when the dependent index is dropped.
Author: Marina Polyakova
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/ad1a0badc32658b1bbb07aa312346a1d@postgrespro.ru
Backpatch-through: 9.5
In a logical replication subscriber, a table using REPLICA IDENTITY FULL
which has a primary key would try to use the primary key's index
available to scan for a tuple, but an assertion only assumed as correct
the case of an index associated to REPLICA IDENTITY USING INDEX. This
commit corrects the assertion so as the use of a primary key index is a
valid case.
Reported-by: Dilip Kumar
Analyzed-by: Dilip Kumar
Author: Euler Taveira
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/CAFiTN-u64S5bUiPL1q5kwpHNd0hRnf1OE-bzxNiOs5zo84i51w@mail.gmail.com
Backpatch-through: 10
The previous coding zeroed out offsetof(ReplicationStateCtl, states)
more bytes than it was entitled to, as a consequence of starting the
zeroing from the wrong pointer (or, if you prefer, using the wrong
calculation of how much to zero).
It's unsurprising that this has not caused any reported problems,
since it can be expected that the newly-allocated block is at the end
of what we've used in shared memory, and we always make the shmem
block substantially bigger than minimally necessary. Nonetheless,
this is wrong and it could bite us someday; plus it's a dangerous
model for somebody to copy.
This dates back to the introduction of this code (commit 5aa235042),
so back-patch to all supported branches.
_bt_killitems marks btree items dead when a scan leaves the page where
they live, but it does so with only share lock (to improve concurrency).
This was historicall okay, since killing a dead item has no
consequences. However, with the advent of data checksums and
wal_log_hints, this action incurs a WAL full-page-image record of the
page. Multiple concurrent processes would write the same page several
times, leading to WAL bloat. The probability of this happening can be
reduced by only killing items if they're not already dead, so change the
code to do that.
The problem could eliminated completely by having _bt_killitems upgrade
to exclusive lock upon seeing a killable item, but that would reduce
concurrency so it's considered a cure worse than the disease.
Backpatch all the way back to 9.5, since wal_log_hints was introduced in
9.4.
Author: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://postgr.es/m/CA+fd4k6PeRj2CkzapWNrERkja5G0-6D-YQiKfbukJV+qZGFZ_Q@mail.gmail.com
amcheck expects at least hikey to always exist on leaf page even if it is
deleted page. But replica reinitializes page during replay of page deletion,
causing deleted page to have no items. Thus, replay of page deletion can
cause an error in concurrent amcheck run.
This commit relaxes amcheck expectation making it tolerate deleted page with
no items.
Reported-by: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAPpHfdt_OTyQpXaPJcWzV2N-LNeNJseNB-K_A66qG%3DL518VTFw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Backpatch-through: 11
Commit 3eb77eba5a moved the loop and refactored it, and inadvertently
changed the effect of fsync=off so that it also skipped removing entries
from the pendingOps table. That was not intentional, and leads to an
assertion failure if you turn fsync on while the server is running and
reload the config.
Backpatch-through: 12-
Reviewed-By: Thomas Munro
Discussion: https://www.postgresql.org/message-id/3cbc7f4b-a5fa-56e9-9591-c886deb07513%40iki.fi
Visual Studio 2015 and later versions should still be able to do the same
as Visual Studio 2012, but the declaration of locale_name is missing in
_locale_t, causing the code compilation to fail, hence this falls back
instead on to enumerating all system locales by using EnumSystemLocalesEx
to find the required locale name. If the input argument is in Unix-style
then we can get ISO Locale name directly by using GetLocaleInfoEx() with
LCType as LOCALE_SNAME.
In passing, change the documentation references of the now obsolete links.
Note that this problem occurs only with NLS enabled builds.
Author: Juan José Santamaría Flecha, Davinder Singh and Amit Kapila
Reviewed-by: Ranier Vilela and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAHzhFSFoJEWezR96um4-rg5W6m2Rj9Ud2CNZvV4NWc9tXV7aXQ@mail.gmail.com
The defect suppressed a Standby Status Update message when bytes flushed
to disk had changed but bytes received had not changed. If
pg_recvlogical then exited with no intervening Standby Status Update,
the next pg_recvlogical repeated already-flushed records. The defect
could also cause superfluous messages, which are functionally harmless.
Back-patch to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20200502221647.GA3941274@rfd.leadboat.com
pg_recvlogical merely called PQfinish(), so the backend sent messages
after the disconnect. When that caused EPIPE in internal_flush(),
before a LogicalConfirmReceivedLocation(), the next pg_recvlogical would
repeat already-acknowledged records. Whether or not the defect causes
EPIPE, post-disconnect messages could contain an ErrorResponse that the
user should see. One properly ends PGRES_COPY_OUT by repeating
PQgetCopyData() until it returns a negative value. Augment one of the
tests to cover the case of WAL past --endpos. Back-patch to v10, where
commit 7c030783a5 first appeared. Before
that commit, pg_recvlogical never reached PGRES_COPY_OUT.
Reported by Thomas Munro.
Discussion: https://postgr.es/m/CAEepm=1MzM2Z_xNe4foGwZ1a+MO_2S9oYDq3M5D11=JDU_+0Nw@mail.gmail.com
Previously when there were multiple timelines listed in the history file
of the recovery target timeline, archive recovery searched all of them,
starting from the newest timeline to the oldest one, to find the segment
to read. That is, archive recovery had to continuously fail scanning
the segment until it reached the timeline that the segment belonged to.
These scans for non-existent segment could be harmful on the recovery
performance especially when archival area was located on the remote
storage and each scan could take a long time.
To address the issue, this commit changes archive recovery so that
it skips scanning the timeline that the segment to read doesn't belong to.
Per discussion, back-patch to all supported versions.
Author: Kyotaro Horiguchi, tweaked a bit by Fujii Masao
Reviewed-by: David Steele, Pavel Suderevsky, Grigory Smolkin
Discussion: https://postgr.es/m/16159-f5a34a3a04dc67e0@postgresql.org
Discussion: https://postgr.es/m/20200129.120222.1476610231001551715.horikyota.ntt@gmail.com
TimelineHistoryRead and TimelineHistoryWrite wait events are reported
during waiting for a read and write of a timeline history file, respectively.
However, previously, TimelineHistoryRead wait event was not reported
while readTimeLineHistory() was reading a timeline history file. Also
TimelineHistoryWrite was not reported while writeTimeLineHistory() was
writing one line with the details of the timeline split, at the end.
This commit fixes these issues.
Back-patch to v10 where wait events for a timeline history file was added.
Author: Masahiro Ikeda
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/d11b0c910b63684424e06772eb844ab5@oss.nttdata.com
checkcondition_str() failed to report multiple matches for a prefix
pattern correctly: it would dutifully merge the match positions, but
then after exiting that loop, if the last prefix-matching word had
had no suitable positions, it would report there were no matches.
The upshot would be failing to recognize a match that the query
should match.
It looks like you need all of these conditions to see the bug:
* a phrase search (else we don't ask for match position details)
* a prefix search item (else we don't get to this code)
* a weight restriction (else checkclass_str won't fail)
Noted while investigating a problem report from Pavel Borisov,
though this is distinct from the issue he was on about.
Back-patch to 9.6 where phrase search was added.
We were acquiring object locks then deleting objects one by one, instead
of acquiring all object locks first, ignoring those that did not exist,
and then deleting all objects together. The latter is the correct
protocol to use, and what this commits changes to code to do. Failing
to follow that leads to "cache lookup failed for relation XYZ" error
reports when DROP OWNED runs concurrently with other DDL -- for example,
a session termination that removes some temp tables.
Author: Álvaro Herrera
Reported-by: Mithun Chicklore Yogendra (Mithun CY)
Reviewed-by: Ahsan Hadi, Tom Lane
Discussion: https://postgr.es/m/CADq3xVZTbzK4ZLKq+dn_vB4QafXXbmMgDP3trY-GuLnib2Ai1w@mail.gmail.com
Attempting to use an installation path of Python that includes spaces
caused the MSVC builds to fail. This fixes the issue by using the same
quoting method as ad7595b for OpenSSL.
Author: Victor Wagner
Discussion: https://postgr.es/m/20200430150608.6dc6b8c4@antares.wagner.home
Backpatch-through: 9.5
Moving this setting into the main configuration file was ill-considered,
perhaps, because that typically causes it to be set before
timezone_abbreviations has been set. Which in turn means that zone
abbreviations don't work, only full zone names.
We could imagine hacking things so that such cases do work, but the
stability of the hack would be questionable, and the value isn't really
that high. Instead just document that you should use a numeric zone
offset or a full zone name.
Per bug #16404 from Reijo Suhonen.
Back-patch to v12 where this was changed.
Discussion: https://postgr.es/m/16404-4603a99603fbd04c@postgresql.org
Both the backend and libpq leaked buffers containing encrypted data
to be transmitted, so that the process size would grow roughly as
the total amount of data sent.
There were also far-less-critical leaks of the same sort in GSSAPI
session establishment.
Oversight in commit b0b39f72b, which I failed to notice while
reviewing the code in 2c0cdc818.
Per complaint from pmc@citylink.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200504115649.GA77072@gate.oper.dinoex.org
If the client is compiled with GSSAPI support and tries to start up GSS
with the server, but the server is not compiled with GSSAPI support, we
would mistakenly end up falling through to call ProcessStartupPacket
with secure_done = true, but the client might then try to perform SSL,
which the backend wouldn't understand and we'd end up failing the
connection with:
FATAL: unsupported frontend protocol 1234.5679: server supports 2.0 to 3.0
Fix by arranging to track ssl_done independently from gss_done, instead
of trying to use the same boolean for both.
Author: Andrew Gierth
Discussion: https://postgr.es/m/87h82kzwqn.fsf@news-spur.riddles.org.uk
Backpatch: 12-, where GSSAPI encryption was added.
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
On further reflection, code comments added by commit b0229f26 slightly
misrepresented how we determine the oldest bpto.xact for the index.
btvacuumpage() does not treat the bpto.xact of a page that it put in the
FSM as a candidate to be the oldest deleted page (the delete-marked page
that has the oldest bpto.xact XID among all pages encountered).
The definition of a deleted page for the purposes of the bpto.xact
calculation is different from the definition used by the bulk delete
statistics. The bulk delete statistics don't distinguish between pages
that were deleted by the current VACUUM, pages deleted by a previous
VACUUM operation but not yet recyclable/reusable, and pages that are
reusable (though reusable pages are counted separately).
Backpatch: 11-, just like commit b0229f26.
The logic for determining how many nbtree pages in an index are deleted
pages sometimes undercounted pages. Pages that were deleted by the
current VACUUM operation (as opposed to some previous VACUUM operation
whose deleted pages have yet to be reused) were sometimes overlooked.
The final count is exposed to users through VACUUM VERBOSE's "%u index
pages have been deleted" output.
btvacuumpage() avoided double-counting when _bt_pagedel() deleted more
than one page by assuming that only one page was deleted, and that the
additional deleted pages would get picked up during a future call to
btvacuumpage() by the same VACUUM operation. _bt_pagedel() can
legitimately delete pages that the btvacuumscan() scan will not visit
again, though, so that assumption was slightly faulty.
Fix the accounting by teaching _bt_pagedel() about its caller's
requirements. It now only reports on pages that it knows btvacuumscan()
won't visit again (including the current btvacuumpage() page), so
everything works out in the end.
This bug has been around forever. Only backpatch to v11, though, to
keep _bt_pagedel() is sync on the branches that have today's bugfix
commit b0229f26da. Note that this commit changes the signature of
_bt_pagedel(), just like commit b0229f26da.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-
Commit 857f9c36cd (which taught nbtree VACUUM to skip a scan of the
index from btcleanup in situations where it doesn't seem worth it) made
VACUUM maintain the oldest btpo.xact among all deleted pages for the
index as a whole. It failed to handle all the details surrounding pages
that are deleted by the current VACUUM operation correctly (though pages
deleted by some previous VACUUM operation were processed correctly).
The most immediate problem was that the special area of the page was
examined without a buffer pin at one point. More fundamentally, the
handling failed to account for the full range of _bt_pagedel()
behaviors. For example, _bt_pagedel() sometimes deletes internal pages
in passing, as part of deleting an entire subtree with btvacuumpage()
caller's page as the leaf level page. The original leaf page passed to
_bt_pagedel() might not be the page that it deletes first in cases where
deletion can take place.
It's unclear how disruptive this bug may have been, or what symptoms
users might want to look out for. The issue was spotted during
unrelated code review.
To fix, push down the logic for maintaining the oldest btpo.xact to
_bt_pagedel(). btvacuumpage() is now responsible for pages that were
fully deleted by a previous VACUUM operation, while _bt_pagedel() is now
responsible for pages that were deleted by the current VACUUM operation
(this includes half-dead pages from a previous interrupted VACUUM
operation that become fully deleted in _bt_pagedel()). Note that
_bt_pagedel() should never encounter an existing deleted page.
This commit theoretically breaks the ABI of a stable release by changing
the signature of _bt_pagedel(). However, if any third party extension
is actually affected by this, then it must already be completely broken
(since there are numerous assumptions made in _bt_pagedel() that cannot
be met outside of VACUUM). It seems highly unlikely that such an
extension actually exists, in any case.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-, where the "skip full scan" feature was introduced.
When pg_basebackup -R is used, we inject standby.signal into the
tar file for the main tablespace. The proper thing to do is to pad
each file injected into the tar file out to a 512-byte boundary
by appending nulls, but here the file is of length 0 and we add
511 zero bytes. Since 0 is already a multiple of 512, we should
not add any zero bytes. Do that instead.
Patch by me, reviewed by Tom Lane.
Discussion: http://postgr.es/m/CA+TgmobWbfReO9-XFk8urR1K4wTNwqoHx_v56t7=T8KaiEoKNw@mail.gmail.com
Queries such as '!(foo<->bar)' failed to find matching rows when
implemented as a GiST or GIN index search. That's because of
failing to handle phrase searches as tri-valued when considering
a query without any position information for the target tsvector.
We can only say that the phrase operator might match, not that it
does match; and therefore its NOT also might match. The previous
coding incorrectly inverted the approximate phrase result to
decide that there was certainly no match.
To fix, we need to make TS_phrase_execute return a real ternary result,
and then bubble that up accurately in TS_execute. As long as we have
to do that anyway, we can simplify the baroque things TS_phrase_execute
was doing internally to manage tri-valued searching with only a bool
as explicit result.
For now, I left the externally-visible result of TS_execute as a plain
bool. There do not appear to be any outside callers that need to
distinguish a three-way result, given that they passed in a flag
saying what to do in the absence of position data. This might need
to change someday, but we wouldn't want to back-patch such a change.
Although tsginidx.c has its own TS_execute_ternary implementation for
use at upper index levels, that sadly managed to get this case wrong
as well :-(. Fixing it is a lot easier fortunately.
Per bug #16388 from Charles Offenbacher. Back-patch to 9.6 where
phrase search was introduced.
Discussion: https://postgr.es/m/16388-98cffba38d0b7e6e@postgresql.org
CreateRole() was passing a Value node, not a RoleSpec node, for the
newly-created role name when adding the role as a member of existing
roles for the IN ROLE syntax.
This mistake went unnoticed because the node in question is used only
for error messages and is not accessed on non-error paths.
In older pg versions (such as 9.5 where this was found), this results
in an "unexpected node type" error in place of the real error. That
node type check was removed at some point, after which the code would
accidentally fail to fail on 64-bit platforms (on which accessing the
Value node as if it were a RoleSpec would be mostly harmless) or give
an "unexpected role type" error on 32-bit platforms.
Fix the code to pass the correct node type, and add an lfirst_node
assertion just in case.
Per report on irc from user m1chelangelo.
Backpatch all the way, because this error has been around for a long
time.
Sticking this comment at the end of the last line was a bad idea: it's
not particularly readable, and it tempts pgindent to mess with line
breaks within the comment, which in turn reveals that win32tzlist.pl's
clean_displayname() does the wrong thing to clean up such line breaks.
While that's not hard to fix, there's basically no excuse for this
arrangement to begin with, especially since it makes the table layout
needlessly vary across back branches with different pgindent rules.
Let's just put the comment inside the braces, instead.
This commit just moves and reformats the comments, and updates
win32tzlist.pl to match; there's no actual data change.
Per odd-looking results from Juan José Santamaría Flecha.
Back-patch, since the point is to make win32_tzmap[] look the
same in all supported branches again.
Discussion: https://postgr.es/m/5752.1587740484@sss.pgh.pa.us
Commit 32ff26911 introduced use of rank() into the triggers view to
calculate the spec-mandated action_order column. As written, this
prevents query constraints on the table-name column from being pushed
below the window aggregate step. That's bad for performance of this
typical usage pattern, since the view now has to be evaluated for all
tables not just the one(s) the user wants to see. It's also the cause
of some recent buildfarm failures, in which trying to evaluate the view
rows for triggers in process of being dropped resulted in "cache lookup
failed for function NNN" errors. Those rows aren't of interest to the
test script doing the query, but the filter that would eliminate them
is being applied too late. None of this happened before the rank()
call was there, so it's a regression compared to v10 and before.
We can improve matters by changing the rank() call so that instead of
partitioning by OIDs, it partitions by nspname and relname, casting
those to sql_identifier so that they match the respective view output
columns exactly. The planner has enough intelligence to know that
constraints on partitioning columns are safe to push down, so this
eliminates the performance problem and the regression test failure
risk. We could make the other partitioning columns match view outputs
as well, but it'd be more complicated and the performance benefits
are questionable.
Side note: as this stands, the planner will push down constraints on
event_object_table and trigger_schema, but not on event_object_schema,
because it checks for ressortgroupref matches not expression
equivalence. That might be worth improving someday, but it's not
necessary to fix the immediate concern.
Back-patch to v11 where the rank() call was added. Ordinarily we'd not
change information_schema in released branches, but the test failure has
been seen in v12 and presumably could happen in v11 as well, so we need
to do this to keep the buildfarm happy. The change is harmless so far
as users are concerned. Some might wish to apply it to existing
installations if performance of this type of query is of concern,
but those who don't are no worse off.
I bumped catversion in HEAD as a pro forma matter (there's no
catalog incompatibility that would really require a re-initdb).
Obviously that can't be done in the back branches.
Discussion: https://postgr.es/m/5891.1587594470@sss.pgh.pa.us
DST law changes in Morocco and the Canadian Yukon.
Historical corrections for Shanghai.
The America/Godthab zone is renamed to America/Nuuk to reflect
current English usage; however, the old name remains available as a
compatibility link.
The test is proving to have timing issues when looking at archive status
files on standbys after crash recovery, while other parts of the test
rely on pg_stat_archiver as a wait point to make sure that a given state
of the archiving is reached. The coverage is not heavily impacted by
the removal those extra tests.
Per reports from several buildfarm animals, like crake, piculet,
culicidae and francolin.
Discussion: https://postgr.es/m/20200424005929.GK33034@paquier.xyz
Backpatch-through: 9.5
78ea8b5 has fixed an issue related to the recycling of WAL segments on
standbys depending on archive_mode. However, it has introduced a
regression with the handling of WAL segments ready to be archived during
crash recovery, causing those files to be recycled without getting
archived.
This commit fixes the regression by tracking in shared memory if a live
cluster is either in crash recovery or archive recovery as the handling
of WAL segments ready to be archived is different in both cases (those
WAL segments should not be removed during crash recovery), and by using
this new shared memory state to decide if a segment can be recycled or
not. Previously, it was not possible to know if a cluster was in crash
recovery or archive recovery as the shared state was able to track only
if recovery was happening or not, leading to the problem.
A set of TAP tests is added to close the gap here, making sure that WAL
segments ready to be archived are correctly handled when a cluster is in
archive or crash recovery with archive_mode set to "on" or "always", for
both standby and primary.
Reported-by: Benoît Lobréau
Author: Jehan-Guillaume de Rorthais
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200331172229.40ee00dc@firost
Backpatch-through: 9.5
In a9c35cf85c I changed ExecMakeTableFunctionResult() to dynamically
allocate the FunctionCallInfo used to call the SRF. Unfortunately I
did not account for the fact that the surrounding memory context has
query lifetime, leading to a leak till the end of the query.
In most cases the leak is fairly inconsequential, but if the
FunctionScan is done many times in the query, the leak can add
up. This happens e.g. if the function scan is on the inner side of a
nested loop, due to a lateral join.
EXPLAIN SELECT sum(f) FROM generate_series(1, 100000000) g(i), generate_series(i, i+1) f;
quickly shows the leak.
Instead of explicitly freeing the FunctionCallInfo it seems better to
make sure all the per-set temporary state in
ExecMakeTableFunctionResult() is cleaned up wholesale. Currently
that's probably just the FunctionCallInfo allocation, but since
there's some initialization work, and since there's already an
appropriate context, this seems like a more robust approach.
Bug: #16112
Reported-By: Ben Cornett
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/16112-4448bbf55a404189%40postgresql.org
Backpatch: 12, a9c35cf85c
Checking if Subject Alternative Names (SANs) from a certificate match
with the hostname connected to leaked memory after each lookup done.
This is broken since acd08d7 that added support for SANs in SSL
certificates, so backpatch down to 9.5.
Author: Roman Peshkurov
Reviewed-by: Hamid Akhtar, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CALLDf-pZ-E3mjxd5=bnHsDu9zHEOnpgPgdnO84E2RuwMCjjyPw@mail.gmail.com
Backpatch-through: 9.5
Add a couple of lines to make it explicit that indexes, constraints,
triggers are added, removed, or left alone.
Backpatch to pg11.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200421162038.GA18628@alvherre.pgsql
Bruce Momjian
Michael Paquier
Alvaro Herrera
Amit Kapila
Tom Lane
Alexander Korotkov
Heikki Linnakangas
Noah Misch
Peter Eisentraut
Fujii Masao
Stephen Frost
Peter Geoghegan
Robert Haas
Andrew Gierth
Andres Freund