This is a follow-up of the work done in commit 0650ff2303. This commit
extends log_recovery_conflict_waits so that a log message is produced
also when recovery conflict has already been resolved after deadlock_timeout
passes, i.e., when the startup process finishes waiting for recovery
conflict after deadlock_timeout. This is useful in investigating how long
recovery conflicts prevented the recovery from applying WAL.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Bertrand Drouvot
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
1. The raw bytea representation of the point-type keys used in the test
depends on endianess. Remove the raw key_data column from the test.
2. The items stored on non-leftmost gist page depends on how many items
git on the other pages. This showed up as a failure on 32-bit i386
systems. To fix, only test the gist_page_items() function on the
leftmost leaf page.
Per Andrey Borodin and the buildfarm.
Discussion: https://www.postgresql.org/message-id/9FCEC1DC-86FB-4A57-88EF-DD13663B36AF%40yandex-team.ru
Similar to commit d6ad34f341, this patch optimizes
DropRelFileNodesAllBuffers() by avoiding the complete buffer pool scan and
instead find the buffers to be invalidated by doing lookups in the
BufMapping table.
This optimization helps operations where the relation files need to be
removed like Truncate, Drop, Abort of Create Table, etc.
Author: Kirk Jamison
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
This struct is used by ReindexRelationConcurrently to keep track of the
relations to process. This saves having to obtain some data repeatedly,
and has future uses as well.
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Hamid Akhtar <hamid.akhtar@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20201130195439.GA24598@alvherre.pgsql
Although a partitioned index's attachment to its parent doesn't
have separate ownership, the ArchiveEntry for it needs to be
marked with an owner anyway, to ensure that the ALTER command
is run by the appropriate role when restoring with
--use-set-session-authorization. Without this, the ALTER will
be run by the role that started the restore session, which will
usually work but it's formally the wrong thing.
Back-patch to v11 where this type of ArchiveEntry was added.
In HEAD, add equivalent commentary to the just-added TABLE ATTACH
case, which I'd made do the right thing already.
Discussion: https://postgr.es/m/1094034.1610418498@sss.pgh.pa.us
The recovery path of DropRelFileNodeBuffers() is optimized so that
scanning of the whole buffer pool can be avoided when the number of
blocks to be truncated in a relation is below a certain threshold. For
such cases, we find the buffers by doing lookups in BufMapping table.
This improves the performance by more than 100 times in many cases
when several small tables (tested with 1000 relations) are truncated
and where the server is configured with a large value of shared
buffers (greater than equal to 100GB).
This optimization helps cases (a) when vacuum or autovacuum truncated off
any of the empty pages at the end of a relation, or (b) when the relation is
truncated in the same transaction in which it was created.
This commit introduces a new API smgrnblocks_cached which returns a cached
value for the number of blocks in a relation fork. This helps us to determine
the exact size of relation which is required to apply this optimization. The
exact size is required to ensure that we don't leave any buffer for the
relation being dropped as otherwise the background writer or checkpointer
can lead to a PANIC error while flushing buffers corresponding to files that
don't exist.
Author: Kirk Jamison based on ideas by Amit Kapila
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
Previously, we emitted the ATTACH PARTITION command as part of
the child table's ArchiveEntry. This was a poor choice since it
complicates restoring the partition as a standalone table; you have
to ignore the error from the ATTACH, which isn't even an option when
restoring direct-to-database with pg_restore. (pg_restore will issue
the whole ArchiveEntry as one PQexec, so that any error rolls back
the table creation as well.) Hence, separate it out as its own
ArchiveEntry, as indeed we already did for index ATTACH PARTITION
commands.
Justin Pryzby
Discussion: https://postgr.es/m/20201023052940.GE9241@telsasoft.com
Wedging a new object type into this table has historically required
manually renumbering a lot of existing entries. (Although it appears
that some people got lazy and re-used the priority level of an
existing object type, even if it wasn't particularly related.)
We can let the compiler do the counting by inventing an enum type that
lists the desired priority levels in order. Now, if you want to add
or remove a priority level, that's a one-liner.
This patch is not purely cosmetic, because I split apart the priorities
of DO_COLLATION and DO_TRANSFORM, as well as those of DO_ACCESS_METHOD
and DO_OPERATOR, which look to me to have been merged out of expediency
rather than because it was a good idea. Shell types continue to be
sorted interchangeably with full types, and opclasses interchangeably
with opfamilies.
Commit 257836a7 accidentally deleted a couple of
redundant-but-conventional "extern" keywords on function prototypes.
Put them back.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Move it to class 57 (Operator Intervention), which seems like a
better choice given that from the client's standpoint it behaves
a heck of a lot like, e.g., ERRCODE_ADMIN_SHUTDOWN.
In a green field I'd put ERRCODE_IDLE_IN_TRANSACTION_SESSION_TIMEOUT
here as well. But that's been around for a few years, so it's
probably too late to change its SQLSTATE code.
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
If a server returns ERRCODE_CANNOT_CONNECT_NOW, try the next host,
if multiple host names have been provided. This allows dealing
gracefully with standby servers that might not be in hot standby mode
yet.
In the wake of the preceding commit, it might be plausible to retry
many more error cases than we do now, but I (tgl) am hesitant to
move too aggressively on that --- it's not clear it'd be desirable
for cases such as bad-password, for example. But this case seems
safe enough.
Hubert Zhang, reviewed by Takayuki Tsunakawa
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
Prefix "could not connect to host-or-socket-path:" to all connection
failure cases that occur after the socket() call, and remove the
ad-hoc server identity data that was appended to a few of these
messages. This should produce much more intelligible error reports
in multiple-target-host situations, especially for error cases that
are off the beaten track to any degree (because none of those provided
any server identity info).
As an example of the change, formerly a connection attempt with a bad
port number such as "psql -p 12345 -h localhost,/tmp" might produce
psql: error: could not connect to server: Connection refused
Is the server running on host "localhost" (::1) and accepting
TCP/IP connections on port 12345?
could not connect to server: Connection refused
Is the server running on host "localhost" (127.0.0.1) and accepting
TCP/IP connections on port 12345?
could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.12345"?
Now it looks like
psql: error: could not connect to host "localhost" (::1), port 12345: Connection refused
Is the server running on that host and accepting TCP/IP connections?
could not connect to host "localhost" (127.0.0.1), port 12345: Connection refused
Is the server running on that host and accepting TCP/IP connections?
could not connect to socket "/tmp/.s.PGSQL.12345": No such file or directory
Is the server running locally and accepting connections on that socket?
This requires adjusting a couple of regression tests to allow for
variation in the contents of a connection failure message.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
Add an optional callback to regression_main() that, if provided,
is invoked on each test output file before we try to compare it
to the expected-result file.
The main and isolation test programs don't need this (yet).
In pg_regress_ecpg, add a filter that eliminates target-host
details from "could not connect" error reports. This filter
doesn't do anything as of this commit, but it will be needed
by the next one.
In the long run we might want to provide some more general,
perhaps pattern-based, filtering mechanism for test output.
For now, this will solve the immediate problem.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
Previously, we had an undisciplined mish-mash of printfPQExpBuffer and
appendPQExpBuffer calls to report errors within libpq. This commit
establishes a uniform rule that appendPQExpBuffer[Str] should be used.
conn->errorMessage is reset only at the start of an application request,
and then accumulates messages till we're done. We can remove no less
than three different ad-hoc mechanisms that were used to get the effect
of concatenation of error messages within a sequence of operations.
Although this makes things quite a bit cleaner conceptually, the main
reason to do it is to make the world safer for the multiple-target-host
feature that was added awhile back. Previously, there were many cases
in which an error occurring during an individual host connection attempt
would wipe out the record of what had happened during previous attempts.
(The reporting is still inadequate, in that it can be hard to tell which
host got the failure, but that seems like a matter for a separate commit.)
Currently, lo_import and lo_export contain exceptions to the "never
use printfPQExpBuffer" rule. If we changed them, we'd risk reporting
an incidental lo_close failure before the actual read or write
failure, which would be confusing, not least because lo_close happened
after the main failure. We could improve this by inventing an
internal version of lo_close that doesn't reset the errorMessage; but
we'd also need a version of PQfn() that does that, and it didn't quite
seem worth the trouble for now.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
Instead of making many block-sized write() calls to fill a new WAL file
with zeroes, make a smaller number of pwritev() calls (or various
emulations). The actual number depends on the OS's IOV_MAX, which
PG_IOV_MAX currently caps at 32. That means we'll write 256kB per call
on typical systems. We may want to tune the number later with more
experience.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
Provide synchronous vectored file I/O routines. These map to preadv()
and pwritev(), with fallback implementations for systems that don't have
them. Also provide a wrapper pg_pwritev_with_retry() that automatically
retries on short writes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
Commit 5a3574d7b3 added the test for decoding of two-phase transactions
during the build of a consistent snapshot. The test forgot to skip empty
xacts which can lead to decoding of extra empty transactions due to
background activity by autovacuum.
Per report by buildfarm.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/363512.1610171267@sss.pgh.pa.us
Commit c9d529848 resulted in having a couple more places where
the error context stack for a failure varies depending on
debug_invalidate_system_caches_always (nee CLOBBER_CACHE_ALWAYS).
This is not very surprising, since we have to re-parse cached
plans if the plan cache is clobbered. Stabilize the expected
test output by hiding the context stack in these places,
as we've done elsewhere in this test script.
(Another idea worth considering, now that we have
debug_invalidate_system_caches_always, is to force it to zero for
these test cases. That seems like it'd risk reducing the coverage
of cache-clobber testing, which might or might not be worth being
able to verify that we get the expected error output in normal
cases. For the moment I just stuck with the existing technique.)
In passing, update comments that referred to CLOBBER_CACHE_ALWAYS.
Per buildfarm member hyrax.
brenext(), when parsing a '*' quantifier, forgot to return any "value"
for the token; per the equivalent case in next(), it should return
value 1 to indicate that greedy rather than non-greedy behavior is
wanted. The result is that the compiled regexp could behave like 'x*?'
rather than the intended 'x*', if we were unlucky enough to have
a zero in v->nextvalue at this point. That seems to happen with some
reliability if we have '.*' at the beginning of a BRE-mode regexp,
although that depends on the initial contents of a stack-allocated
struct, so it's not guaranteed to fail.
Found by Alexander Lakhin using valgrind testing. This bug seems
to be aboriginal in Spencer's code, so back-patch all the way.
Discussion: https://postgr.es/m/16814-6c5e3edd2bdf0d50@postgresql.org
This commit addresses two issues:
- In pgcrypto, MD5 computation called pg_cryptohash_{init,update,final}
without checking for the result status.
- Simplify pg_checksum_raw_context to use only one variable for all the
SHA2 options available in checksum manifests.
Reported-by: Heikki Linnakangas
Discussion: https://postgr.es/m/f62f26bb-47a5-8411-46e5-4350823e06a5@iki.fi
We found last February that the error-case tests added by commit
008cf0409 failed on OpenBSD, because that platform doesn't really
check locale names. At the time it seemed that that was only an issue
for LC_CTYPE, but testing on a more recent version of OpenBSD shows
that it's now equally lax about LC_COLLATE.
Rather than dropping the LC_COLLATE test too, put back LC_CTYPE
(reverting c4b0edb07), and adjust these tests to accept the different
error message that we get if setlocale() doesn't reject a bogus locale
name. The point of these tests is not really what the backend does
with the locale name, but to show that createdb quotes funny locale
names safely; so we're not losing test reliability this way.
Back-patch as appropriate.
Discussion: https://postgr.es/m/231373.1610058324@sss.pgh.pa.us
On reflection, the order of operations in PostgresMain() is wrong.
These timeouts ought to be shut down before, not after, we do the
post-command-read CHECK_FOR_INTERRUPTS, to guarantee that any
timeout error will be detected there rather than at some ill-defined
later point (possibly after having wasted a lot of work).
This is really an error in the original idle_in_transaction_timeout
patch, so back-patch to 9.6 where that was introduced.
This commit adds GUC log_recovery_conflict_waits that controls whether
a log message is produced when the startup process is waiting longer than
deadlock_timeout for recovery conflicts. This is useful in determining
if recovery conflicts prevent the recovery from applying WAL.
Note that currently a log message is produced only when recovery conflict
has not been resolved yet even after deadlock_timeout passes, i.e.,
only when the startup process is still waiting for recovery conflict
even after deadlock_timeout.
Author: Bertrand Drouvot, Masahiko Sawada
Reviewed-by: Alvaro Herrera, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
The allocation of the cryptohash context data when building with OpenSSL
was happening in the memory context of the caller of
pg_cryptohash_create(), which could lead to issues with resowner cleanup
if cascading resources are cleaned up on an error. Like other
facilities using resowners, move the base allocation to TopMemoryContext
to ensure a correct cleanup on failure.
The resulting code gets simpler with this commit as the context data is
now hold by a unique opaque pointer, so as there is only one single
allocation done in TopMemoryContext.
After discussion, also change the cryptohash subroutines to return an
error if the caller provides NULL for the context data to ease error
detection on OOM.
Author: Heikki Linnakangas
Discussion: https://postgr.es/m/X9xbuEoiU3dlImfa@paquier.xyz
This GUC variable works much like idle_in_transaction_session_timeout,
in that it kills sessions that have waited too long for a new client
query. But it applies when we're not in a transaction, rather than
when we are.
Li Japin, reviewed by David Johnston and Hayato Kuroda, some
fixes by me
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
A very common usage pattern is that we set a timeout that we don't
expect to reach, cancel it after a little bit, and later repeat.
With the original implementation of timeout.c, this results in one
setitimer() call per timeout set or cancel. We can do a lot better
by being lazy about changing the timeout interrupt request, namely:
(1) never cancel the outstanding interrupt, even when we have no
active timeout events;
(2) if we need to set an interrupt, but there already is one pending
at or before the required time, leave it alone. When the interrupt
happens, the signal handler will reschedule it at whatever time is
then needed.
For example, with a one-second setting for statement_timeout, this
method results in having to interact with the kernel only a little
more than once a second, no matter how many statements we execute
in between. The mainline code might never call setitimer() at all
after the first time, while each time the signal handler fires,
it sees that the then-pending request is most of a second away,
and that's when it sets the next interrupt request for. Each
mainline timeout-set request after that will observe that the time
it wants is past the pending interrupt request time, and do nothing.
This also works pretty well for cases where a few different timeout
lengths are in use, as long as none of them are very short. But
that describes our usage well.
Idea and original patch by Thomas Munro; I fixed a race condition
and improved the comments.
Discussion: https://postgr.es/m/CA+hUKG+o6pbuHBJSGnud=TadsuXySWA7CCcPgCt2QE9F6_4iHQ@mail.gmail.com
This module provides a function test_regex() that is functionally
rather like regexp_matches(), but with additional debugging-oriented
options and additional output. The debug options are somewhat obscure;
they are chosen to match the API of the test harness that Henry Spencer
wrote way-back-when for use in Tcl. With this, we can import all the
test cases that Spencer wrote originally, even for regex functionality
that we don't currently expose in Postgres. This seems necessary
because we can no longer rely on Tcl to act as upstream and verify
any fixes or improvements that we make.
In addition to Spencer's tests, I added a few for lookbehind
constraints (which we added in 2015, and Tcl still hasn't absorbed)
that are modeled on his tests for lookahead constraints. After looking
at code coverage reports, I also threw in a couple of tests to more
fully exercise our "high colormap" logic.
According to my testing, this brings the check-world coverage
for src/backend/regex/ from 71.1% to 86.7% of lines.
(coverage.postgresql.org shows a slightly different number,
which I think is because it measures a non-assert build.)
Discussion: https://postgr.es/m/2873268.1609732164@sss.pgh.pa.us
Forced cache invalidation (CLOBBER_CACHE_ALWAYS) has been impractical
to use for testing in PostgreSQL because it's so slow and because it's
toggled on/off only at build time. It is helpful when hunting bugs in
any code that uses the sycache/relcache because causes cache
invalidations to be injected whenever it would be possible for an
invalidation to occur, whether or not one was really pending.
Address this by providing run-time control over cache clobber
behaviour using the new debug_invalidate_system_caches_always GUC.
Support is not compiled in at all unless assertions are enabled or
CLOBBER_CACHE_ENABLED is explicitly defined at compile time. It
defaults to 0 if compiled in, so it has negligible effect on assert
build performance by default.
When support is compiled in, test code can now set
debug_invalidate_system_caches_always=1 locally to a backend to test
specific queries, functions, extensions, etc. Or tests can toggle it
globally for a specific test case while retaining normal performance
during test setup and teardown.
For backwards compatibility with existing test harnesses and scripts,
debug_invalidate_system_caches_always defaults to 1 if
CLOBBER_CACHE_ALWAYS is defined, and to 3 if CLOBBER_CACHE_RECURSIVE
is defined.
CLOBBER_CACHE_ENABLED is now visible in pg_config_manual.h, as is the
related RECOVER_RELATION_BUILD_MEMORY setting for the relcache.
Author: Craig Ringer <craig.ringer@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CAMsr+YF=+ctXBZj3ywmvKNUjWpxmuTuUKuv-rgbHGX5i5pLstQ@mail.gmail.com
The deadlocks that the recovery conflict on lock is involved in can
happen between hot-standby backends and the startup process.
If a backend takes an access exclusive lock on the table and which
finally triggers the deadlock, that deadlock can be detected
as expected. On the other hand, previously, if the startup process
took an access exclusive lock and which finally triggered the deadlock,
that deadlock could not be detected and could remain even after
deadlock_timeout passed. This is a bug.
The cause of this bug was that the code for handling the recovery
conflict on lock didn't take care of deadlock case at all. It assumed
that deadlocks involving the startup process and backends were able
to be detected by the deadlock detector invoked within backends.
But this assumption was incorrect. The startup process also should
have invoked the deadlock detector if necessary.
To fix this bug, this commit makes the startup process invoke
the deadlock detector if deadlock_timeout is reached while handling
the recovery conflict on lock. Specifically, in that case, the startup
process requests all the backends holding the conflicting locks to
check themselves for deadlocks.
Back-patch to v9.6. v9.5 has also this bug, but per discussion we decided
not to back-patch the fix to v9.5. Because v9.5 doesn't have some
infrastructure codes (e.g., 37c54863cf) that this bug fix patch depends on.
We can apply those codes for the back-patch, but since the next minor
version release is the final one for v9.5, it's risky to do that. If we
unexpectedly introduce new bug to v9.5 by the back-patch, there is no
chance to fix that. We determined that the back-patch to v9.5 would give
more risk than gain.
Author: Fujii Masao
Reviewed-by: Bertrand Drouvot, Masahiko Sawada, Kyotaro Horiguchi
Discussion: https://postgr.es/m/4041d6b6-cf24-a120-36fa-1294220f8243@oss.nttdata.com
The default value of recovery_target_timeline was changed in v12,
but the description about the default behavior of that was not updated.
Back-patch to v12 where the default behavior of recovery_target_timeline
was changed.
Author: Benoit Lobréau
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAPE8EZ7c3aruEmM24GYkj8y8WmHKD1m9TtPtgCF0nQ3zw4LCkQ@mail.gmail.com
Formerly, TOAST objects were unconditionally suppressed, but since
\d is able to print them it's not very clear why these variants
should not. Instead, use the same rules as for system catalogs:
they can be seen if you write the 'S' modifier or a table name
pattern. (In practice, since hardly anybody would keep pg_toast
in their search_path, it's really down to whether you use a pattern
that can match pg_toast.*.)
No docs change seems necessary because the docs already say that
this happens for "system objects"; we're just classifying TOAST
tables as being that.
Justin Pryzby, reviewed by Laurenz Albe
Discussion: https://postgr.es/m/20201130165436.GX24052@telsasoft.com
Aside from being queriable via SHOW, this value is sent to the client
immediately at session startup, and again later on if the server gets
promoted to primary during the session. The immediate report will be
used in an upcoming patch to avoid an extra round trip when trying to
connect to a primary server.
Haribabu Kommi, Greg Nancarrow, Tom Lane; reviewed at various times
by Laurenz Albe, Takayuki Tsunakawa, Peter Smith.
Discussion: https://postgr.es/m/CAF3+xM+8-ztOkaV9gHiJ3wfgENTq97QcjXQt+rbFQ6F7oNzt9A@mail.gmail.com
Fujii Masao
Heikki Linnakangas
Magnus Hagander
Thomas Munro
Amit Kapila
Michael Paquier
Alvaro Herrera
Tom Lane
Bruce Momjian
Tomas Vondra
Peter Eisentraut
Dean Rasheed