Replay of XLOG_BTREE_VACUUM during Hot Standby was previously thought to require
complex interlocking that matched the requirements on the master. This required
an O(N) operation that became a significant problem with large indexes, causing
replication delays of seconds or in some cases minutes while the
XLOG_BTREE_VACUUM was replayed.
This commit skips the pin scan that was previously required, by observing in
detail when and how it is safe to do so, with full documentation. The pin
scan is skipped only in replay; the VACUUM code path on master is not
touched here and WAL is identical.
The current commit applies in all cases, effectively replacing commit
687f2cd7a0.
Often, upon getting an unexpected error in psql, one's first wish is that
the verbosity setting had been higher; for example, to be able to see the
schema-name field or the server code location info. Up to now the only way
has been to adjust the VERBOSITY variable and repeat the failing query.
That's a pain, and it doesn't work if the error isn't reproducible.
This commit adds a psql feature that redisplays the most recent server
error at full verbosity, without needing to make any variable changes or
re-execute the failed command. We just need to hang onto the latest error
PGresult in case the user executes \errverbose, and then apply libpq's
new PQresultVerboseErrorMessage() function to it. This will consume
some trivial amount of psql memory, but otherwise the cost when the
feature isn't used should be negligible.
Alex Shulgin, reviewed by Daniel Vérité, some improvements by me
Often, upon getting an unexpected error in psql, one's first wish is that
the verbosity setting had been higher; for example, to be able to see the
schema-name field or the server code location info. Up to now the only way
has been to adjust the VERBOSITY variable and repeat the failing query.
That's a pain, and it doesn't work if the error isn't reproducible.
This commit adds support in libpq for regenerating the error message for
an existing error PGresult at any desired verbosity level. This is almost
just a matter of refactoring the existing code into a subroutine, but there
is one bit of possibly-needed information that was not getting put into
PGresults: the text of the last query sent to the server. We must add that
string to the contents of an error PGresult. But we only need to save it
if it might be used, which with the existing error-formatting code only
happens if there is a PG_DIAG_STATEMENT_POSITION error field, which is
probably pretty rare for errors in production situations. So really the
overhead when the feature isn't used should be negligible.
Alex Shulgin, reviewed by Daniel Vérité, some improvements by me
Some buildfarm members are showing "comparison is always false due to
limited range of data type" complaints on this test, so #ifdef it out
on machines with 32-bit int.
Looking at result of buildfarm member jaguarundi it seems to me that
BloomOptions isn't inited sometime, but I don't see yet how it's possible.
Nevertheless, check of signature length's is missed, so, add
a limit of it. Also add missed GenericXLogAbort() in case of already
deleted page in vacuum + minor code refactoring.
As with the previous patch, large numbers of null rows could skew this
calculation unfavorably, causing us to discard values that have a
legitimate claim to be MCVs, since our definition of MCV is that it's
most common among the non-null population of the column. Hence, make
the numerator of avgcount be the number of non-null sample values not
the number of sample rows; likewise for maxmincount in the
compute_scalar_stats variant.
Also, make the denominator be the number of distinct values actually
observed in the sample, rather than reversing it back out of the computed
stadistinct. This avoids depending on the accuracy of the Haas-Stokes
approximation, and really it's what we want anyway; the threshold should
depend only on what we see in the sample, not on what we extrapolate
about the contents of the whole column.
Alex Shulgin, reviewed by Tomas Vondra and myself
Previously, we included null rows in the values of n and N that went
into the formula, which amounts to considering null as a value in its
own right; but the d and f1 values do not include nulls. This is
inconsistent, and it contributes to significant underestimation of
ndistinct when the column is mostly nulls. In any case stadistinct
is defined as the number of distinct non-null values, so we should
exclude nulls when doing this computation.
This is an aboriginal bug in our application of the Haas-Stokes formula,
but we'll refrain from back-patching for fear of destabilizing plan
choices in released branches.
While at it, make the code a bit more readable by omitting unnecessary
casts and intermediate variables.
Observation and original patch by Tomas Vondra, adjusted to fix both
uses of the formula by Alex Shulgin, cosmetic improvements by me
In the test_slot_timelines test module, we were abusing passing NULL
values which was received as zeroes in x86, but this breaks in ARM
(buildfarm member hamster) by crashing instead. Fix the breakage by
marking these functions as STRICT; the InvalidXid value that was
previously implicit in NULL values (on x86 at least) can now be passed
as 0. Failing to follow the fmgr protocol to check for NULLs beforehand
was causing ARM to fail, as evidenced by segmentation faults in
buildfarm member hamster.
In order to use the new functionality in the test script, use COALESCE
in the right spot to avoid forwarding NULL values.
This was diagnosed from the hamster crash by Craig Ringer, who also
proposed a different patch (checking for NULL values explicitely in the
C function code, and keeping the non-strictness in the C functions).
I decided to go with this approach instead.
Our actual convention, contrary to what I said in 59a2111b23, is not to
quote type names, as evidenced by unquoted use of format_type_be()
result value in error messages. Remove quotes from recently tweaked
messages accordingly.
Per note from Tom Lane
Commit acdf2a8b added a test case involving minus zero as a box endpoint.
This is not very portable, as evidenced by the several older buildfarm
members that are failing on the test because they print minus zero as
just "0". If there were any significant reason to test this behavior,
we could consider carrying a separate expected-file; but it doesn't look
to me like there's adequate justification to accept such a maintenance
burden. Just change the test to use plain zero, instead.
When getParamDescriptions was changed to handle out-of-memory better
by cribbing error recovery logic from getRowDescriptions/getAnotherTuple,
somebody omitted to copy the stanza about checking for excess data in
the message. But you need to do that, since continue'ing out of the
switch in pqParseInput3 means no such check gets applied there anymore.
Noted while looking at Michael Paquier's patch that made yet another
copy of this advance_and_error logic.
(This whole business desperately needs refactoring, because I sure don't
want to see a dozen copies of this code, but that's where we seem to be
headed. What's more, the "suspend parsing on EOF return" convention is a
holdover from protocol 2 and shouldn't exist at all in protocol 3, because
we don't process partial messages anymore. But for now, just fix the
obvious bug.)
Also, fix some wrong/missing comments about what the API spec is
for these three functions.
This doesn't seem worthy of back-patching, even though it's a bug;
the case shouldn't ever arise in the field.
Module provides new access method. It is actually a simple Bloom filter
implemented as pgsql's index. It could give some benefits on search
with large number of columns.
Module is a single way to test generic WAL interface committed earlier.
Author: Teodor Sigaev, Alexander Korotkov
Reviewers: Aleksander Alekseev, Michael Paquier, Jim Nasby
This interface is designed to give an access to WAL for extensions which
could implement new access method, for example. Previously it was
impossible because restoring from custom WAL would need to access system
catalog to find a redo custom function. This patch suggests generic way
to describe changes on page with standart layout.
Bump XLOG_PAGE_MAGIC because of new record type.
Author: Alexander Korotkov with a help of Petr Jelinek, Markus Nullmeier and
minor editorization by my
Reviewers: Petr Jelinek, Alvaro Herrera, Teodor Sigaev, Jim Nasby,
Michael Paquier
I should have remembered that we can't use INT64_MODIFIER with sscanf():
configure chooses that to work with snprintf(), but it might be for our
src/port/snprintf.c implementation and so not compatible with the
platform's sscanf(). This appears to be the explanation for buildfarm
member frogmouth's continuing unhappiness with the tzcode update.
Fortunately, in all of the places where zic is attempting to read into
an int64 variable, it's reading a year which certainly will fit just fine
into an int. So make it read into an int with %d, and then cast or copy
as necessary.
Previously this test was relying too much on WAL replay to occur in the
exact configured interval, which was unreliable on slow or overly busy
servers. Use a custom loop instead of poll_query_until, which is
hopefully more reliable.
Per continued failures on buildfarm member hamster (which is probably
the only one running this test suite)
Author: Michaël Paquier
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
When decoding from a logical slot, it's necessary for xlog reading to be
able to read xlog from historical (i.e. not current) timelines;
otherwise, decoding fails after failover, because the archives are in
the historical timeline. This is required to make "failover logical
slots" possible; it currently has no other use, although theoretically
it could be used by an extension that creates a slot on a standby and
continues to replay from the slot when the standby is promoted.
This commit includes a module in src/test/modules with functions to
manipulate the slots (which is not otherwise possible in SQL code) in
order to enable testing, and a new test in src/test/recovery to ensure
that the behavior is as expected.
Author: Craig Ringer
Reviewed-By: Oleksii Kliukin, Andres Freund, Petr Jelínek
Some minor tweaks and comment additions, for cleanliness sake and to
avoid having the upcoming timeline-following patch be polluted with
unrelated cleanup.
Extracted from a larger patch by Craig Ringer, reviewed by Andres
Freund, with some additions by myself.
Formerly, the geometric I/O routines such as box_in and point_out relied
directly on strtod() and sprintf() for conversion of the float8 component
values of their data types. However, the behavior of those functions is
pretty platform-dependent, especially for edge-case values such as
infinities and NaNs. This was exposed by commit acdf2a8b37, which
added test cases involving boxes with infinity endpoints, and immediately
failed on Windows and AIX buildfarm members. We solved these problems
years ago in the main float8in and float8out functions, so let's fix it
by making the geometric types use that code instead of depending directly
on the platform-supplied functions.
To do this, refactor the float8in code so that it can be used to parse
just part of a string, and as a convenience make the guts of float8out
usable without going through DirectFunctionCall.
While at it, get rid of geo_ops.c's fairly shaky assumptions about the
maximum output string length for a double, by having it build results in
StringInfo buffers instead of fixed-length strings.
In passing, convert all the "invalid input syntax for type foo" messages
in this area of the code into "invalid input syntax for type %s" to reduce
the number of distinct translatable strings, per recent discussion.
We would have needed a fair number of the latter anyway for code-sharing
reasons, so we might as well just go whole hog.
Note: this patch is by no means intended to guarantee that the geometric
types uniformly behave sanely for infinity or NaN component values.
But any bugs we have in that line were there all along, they were just
harder to reach in a platform-independent way.
My compiler doesn't like the lack of initialization of "flag", and
I think it's right: if there were zero keys we'd have an undefined
result. The AND of zero items is TRUE, so initialize to TRUE.
Patch implements quad-tree over boxes, naive approach of 2D quad tree will not
work for any non-point objects because splitting space on node is not
efficient. The idea of pathc is treating 2D boxes as 4D points, so,
object will not overlap (in 4D space).
The performance tests reveal that this technique especially beneficial
with too much overlapping objects, so called "spaghetti data".
Author: Alexander Lebedev with editorization by Emre Hasegeli and me
During scan sometimes it would be very helpful to know some information about
parent node or all ancestor nodes. Right now reconstructedValue could be used
but it's not a right usage of it (range opclass uses that).
traversalValue is arbitrary piece of memory in separate MemoryContext while
reconstructedVale should have the same type as indexed column.
Subsequent patches for range opclass and quad4d tree will use it.
Author: Alexander Lebedev, Teodor Sigaev
Reporting the specific out-of-range input value produces platform-dependent
results. We could skip reporting the value, but that's contrary to our
message style guidelines and unhelpful to users. Or we could add a
separate expected-output file for Windows, but that would be a substantial
maintenance burden, and these test cases seem unlikely to be worth it.
Per buildfarm.
The server hasn't paid attention to the TZ environment variable since
commit ca4af308c3, but that commit missed removing this documentation
reference, as did commit d883b916a9 which added the reference where
it now belongs (initdb).
Back-patch to 9.2 where the behavior changed. Also back-patch
d883b916a9 as needed.
Matthew Somerville
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
interval_mul() attempts to prevent its calculations from producing silly
results, but it forgot that zero times infinity yields NaN in IEEE
arithmetic. Hence, a case like '1 second'::interval * 'infinity'::float8
produced a NaN for the months product, which didn't trigger the range
check, resulting in bogus and possibly platform-dependent output.
This isn't terribly obvious to the naked eye because if you try that
exact case, you get "interval out of range" which is what you expect
--- but if you look closer, the error is coming from interval_out not
interval_mul. interval_mul has allowed a bogus value into the system.
Fix by adding isnan tests.
Noted while testing Vitaly Burovoy's fix for infinity input to
to_timestamp(). Given the lack of field complaints, I doubt this
is worth a back-patch.
With the original SQL-function implementation, such cases failed because
we don't support infinite intervals. Converting the function to C lets
us bypass the interval representation, which should be a bit faster as
well as more flexible.
Vitaly Burovoy, reviewed by Anastasia Lubennikova
resulttypeLen and resulttypeByVal must be set correctly when serializing
aggregates, not just when finalizing them. This was in David's final
patch but I downloaded the wrong version by mistake and failed to spot
the error.
David Rowley
This is necessary infrastructure for supporting parallel aggregation
for aggregates whose transition type is "internal". Such values
can't be passed between cooperating processes, because they are
just pointers.
David Rowley, reviewed by Tomas Vondra and by me.
The description of what the per-transaction log file says for skipped
transactions is just plain wrong.
Report and patch by Tomas Vondra, reviewed by Fabien Coelho and
modified by me.
Simon Riggs
Tom Lane
Teodor Sigaev
Stephen Frost
Noah Misch
Alvaro Herrera
Fujii Masao
Magnus Hagander
Robert Haas