When specified directly as DML queries, INSERT was not getting always
completed to "INSERT INTO", same for DELETE with "DELETE FROM". This
makes the completion behavior more consistent for both commands, saving
a few keystrokes.
Commands on policies, triggers, grant/revoke, etc. require only DELETE
as completion keyword.
Author: Haiying Tang
Reviewed-by: Dilip Kumar, Julien Rouhaud
Discussion: https://postgr.es/m/OS0PR01MB61135AE2B07CCD1AB8C6A0F6FB549@OS0PR01MB6113.jpnprd01.prod.outlook.com
The worker.c global wrconn is only meant to be used by logical apply/
tablesync workers, but there are other variables with the same name. To
reduce future confusion rename the global from "wrconn" to
"LogRepWorkerWalRcvConn".
While this is just cosmetic, it seems better to backpatch it all the way
back to 10 where this code appeared, to avoid future backpatching
issues.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
Previously, any error reported by the backend while reading
system_constraints.sql would report the entire file, not just the
particular command it was working on. (Ask me how I know.) Likewise,
there were chunks of system_functions.sql that would be read as one
command, which would be annoying if anything failed there.
The issue for system_constraints.sql is an oversight in commit
dfb75e478. I didn't try to trace down where the poor formatting
in system_functions.sql started, but it's certainly contrary to
the advice at the head of that file.
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid 8000 --target-oid 6150
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
The section of the code in charge of returning all the relations
associated to a subscription only need one ScanKey, but allocated two of
them. This code was introduced as a copy-paste from a different area on
the same file by 7c4f524, making the result confusing to follow.
Author: Peter Smith
Reviewed-by: Tom Lane, Julien Rouhaud, Bharath Rupireddy
Discussion: https://postgr.es/m/CAHut+PsLKe+rN3FjchoJsd76rx2aMsFTB7CTFxRgUP05p=kcpQ@mail.gmail.com
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
Several queries in the privileges regression test cause the planner
to apply the plpgsql function "leak()" to every element of the
histogram for atest12.b. Since commit 0c882e52a increased the size
of that histogram to 10000 entries, the test invokes that function
over 100000 times, which takes an absolutely unreasonable amount of
time in clobber-cache-always mode.
However, there's no real reason why that has to be a plpgsql
function: for the purposes of this test, all that matters is that
it not be marked leakproof. So we can replace the plpgsql
implementation with a direct call of int4lt, which has the same
behavior and is orders of magnitude faster. This is expected to
cut several hours off the buildfarm cycle time for CCA animals.
It has some positive impact in normal builds too, though that's
probably lost in the noise.
Back-patch to v13 where 0c882e52a came in.
Discussion: https://postgr.es/m/575884.1620626638@sss.pgh.pa.us
Previously long was used as the data type for some counters in BufferUsage
and WalUsage. But long is only four byte, e.g., on Windows, and it's entirely
possible to wrap a four byte counter. For example, emitting more than
four billion WAL records in one transaction isn't actually particularly rare.
To avoid the overflows of those counters, this commit changes the data type
of them from long to int64.
Suggested-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20201221211650.k7b53tcnadrciqjo@alap3.anarazel.de
Discussion: https://postgr.es/m/af0964ac-7080-1984-dc23-513754987716@oss.nttdata.com
Use a static prolog file instead of generating the prolog from the
existing perl script. Also, support generation of the file in a vpath
build.
Discussion: https://postgr.es/m/700620.1620662868@sss.pgh.pa.us
I copied the existing spelling of "--max_connections", but
that's just wrong :-(. Evidently setting $ENV{MAX_CONNECTIONS}
has never actually worked in this script. Given the lack of
complaints, it's probably not worth back-patching a fix.
Per buildfarm.
Discussion: https://postgr.es/m/899209.1620759506@sss.pgh.pa.us
Having to maintain two lists of regression test scripts has proven
annoyingly error-prone. We can achieve the effect of the
serial_schedule by running the parallel_schedule with
"--max_connections=1"; so do that and remove serial_schedule.
This causes cosmetic differences in the progress output, but it
doesn't seem worth restructuring pg_regress to avoid that.
Discussion: https://postgr.es/m/899209.1620759506@sss.pgh.pa.us
opr_sanity's binary_coercible() function has always been meant
to match the parser's notion of binary coercibility, but it also
has always been a rather poor approximation of the parser's
real rules (as embodied in IsBinaryCoercible()). That hasn't
bit us so far, but it's predictable that it will eventually.
It also now emerges that implementing this check in plpgsql
performs absolutely horribly in clobber-cache-always testing.
(Perhaps we could do something about that, but I suspect it just
means that plpgsql is exploiting catalog caching to the hilt.)
Hence, let's replace binary_coercible() with a C shim that directly
invokes IsBinaryCoercible(), eliminating both the semantic hazard
and the performance issue.
Most of regress.c's C functions are declared in create_function_1,
but we can't simply move that to before opr_sanity/type_sanity
since those tests would complain about the resulting shell types.
I chose to split it into create_function_0 and create_function_1.
Since create_function_0 now runs as part of a parallel group while
create_function_1 doesn't, reduce the latter to create just those
functions that opr_sanity and type_sanity would whine about.
To make room for create_function_0 in the second parallel group
of tests, move tstypes to the third parallel group.
In passing, clean up some ordering deviations between
parallel_schedule and serial_schedule.
Discussion: https://postgr.es/m/292305.1620503097@sss.pgh.pa.us
Since its introduction in bbe0a81, compression of table data supports
LZ4, but nothing had been done within the MSVC scripts to allow users to
build the code with this library.
This commit closes the gap by extending the MSVC scripts to be able to
build optionally with LZ4. Getting libraries that can be used for
compilation and execution is possible as LZ4 can be compiled down to
MSVC 2010 using its source tarball. MinGW may require extra efforts to
be able to work, and I have been able to test this only with MSVC, still
this is better than nothing to give users a way to test the feature on
Windows.
Author: Dilip Kumar
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/YJPdNeF68XpwDDki@paquier.xyz
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
While we were (mostly) careful about ensuring that the dimensions of
arrays aren't large enough to cause integer overflow, the lower bound
values were generally not checked. This allows situations where
lower_bound + dimension overflows an integer. It seems that that's
harmless so far as array reading is concerned, except that array
elements with subscripts notionally exceeding INT_MAX are inaccessible.
However, it confuses various array-assignment logic, resulting in a
potential for memory stomps.
Fix by adding checks that array lower bounds aren't large enough to
cause lower_bound + dimension to overflow. (Note: this results in
disallowing cases where the last subscript position would be exactly
INT_MAX. In principle we could probably allow that, but there's a lot
of code that computes lower_bound + dimension and would need adjustment.
It seems doubtful that it's worth the trouble/risk to allow it.)
Somewhat independently of that, array_set_element() was careless
about possible overflow when checking the subscript of a fixed-length
array, creating a different route to memory stomps. Fix that too.
Security: CVE-2021-32027
When building without --enable-dtrace, emit dummy
do {} while (0)
statements for the stubbed-out TRACE_POSTGRESQL_foo() macros
instead of empty macros that totally elide the original probe
statement.
This fixes the
warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
introduced by b94409a02f.
Author: Craig Ringer <craig.ringer@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/20210504221531.cfvpmmdfsou6eitb%40alap3.anarazel.de
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Some relations with LZ4 used as the toast compression methods have been
left around in the main regression test suite to stress pg_upgrade, but
pg_dump, that includes tests much more picky in terms of output
generated, had no actual coverage with this feature.
Similarly to collations, tests only working with LZ4 are tracked with an
additional flag, and this uses TestLib::check_pg_config() to check if
the build supports LZ4 or not. This stresses more scenarios with
tables, materialized views and pg_dump --no-toast-compression.
Author: Dilip Kumar
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFiTN-twgPmohG7qj1HXhySq16h123y5OowsQR+5h1YeZE9fmQ@mail.gmail.com
These comments left the impression that USE_VALGRIND isn't really
essential for valgrind testing. But that's wrong, as I learned
the hard way today.
Discussion: https://postgr.es/m/512778.1620588546@sss.pgh.pa.us
In 9eacee2e6, I included some code to verify the cache's memory tracking
is correct by counting up the number of entries and the memory they use
each time we evict something from the cache. Those values are then
compared to the expected values using Assert. The problem is that this
requires looping over the entire cache hash table each time we evict an
entry from the cache. That can be pretty expensive, as noted by Pavel
Stehule.
Here we move this memory accounting checking code so that we only verify
it on cassert builds once when shutting down the Result Cache node.
Aside from the performance increase, this has two distinct advantages:
1) We do the memory checks at the last possible moment before destroying
the cache. This means we'll now catch accounting problems that might
sneak in after a cache eviction.
2) We now do the memory Assert checks when there were no cache evictions.
This increases the coverage.
One small disadvantage is that we'll now miss any memory tracking issues
that somehow managed to resolve themselves by the end of execution.
However, it seems to me that such a memory tracking problem would be quite
unlikely, and likely somewhat less harmful if one were to exist.
In passing, adjust the loop over the hash table to use the standard
simplehash.h method of iteration.
Reported-by: Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRAzgoSkdEiqrKbT=7yG9FA5fjUAP3jmJywuDqYq6Ki5ug@mail.gmail.com
It seems that various people have moved GUCs around in the config.sgml
listing without bothering to make the code agree. Ensure that the
config_group codes assigned to GUCs match where they are listed in
config.sgml. Likewise ensure that postgresql.conf.sample lists GUCs
in the same sub-section and same ordering as they appear in config.sgml.
(I've got some doubts about some of these choices, but for the purposes
of this patch, we'll treat config.sgml as gospel.)
Notably, this requires adding a WAL_RECOVERY config_group value,
because 1d257577e didn't. As long as we're renumbering that enum
anyway, let's take out the values corresponding to major groups
that are divided into sub-groups. No GUC should be assigned to the
major group itself, so those values just create a temptation to
do the wrong thing, while adding work for translators.
In passing, adjust the short_desc strings for PRESET_OPTIONS GUCs
to uniformly use the phrasing "Shows XYZ.", removing the impression
some of these strings left that you can set the value.
While some of these errors are old, no back-patch, as changing the
contents of the pg_settings view in stable branches seems more likely
to be seen as a compatibility break than anything helpful.
Bharath Rupireddy, Justin Pryzby, Tom Lane
Discussion: https://postgr.es/m/16997-ff16127f6e0d1390@postgresql.org
Discussion: https://postgr.es/m/20210413123139.GE6091@telsasoft.com
This patch replaces use of the global "wrconn" variable in
AlterSubscription_refresh with a local variable of the same name, making
it consistent with other functions in subscriptioncmds.c (e.g.
DropSubscription).
The global wrconn is only meant to be used for logical apply/tablesync worker.
Abusing it this way is known to cause trouble if an apply worker
manages to do a subscription refresh, such as reported by Jeremy Finzel
and diagnosed by Andres Freund back in November 2020, at
https://www.postgresql.org/message-id/20201111215820.qihhrz7fayu6myfi@alap3.anarazel.de
Backpatch to 10. In branch master, also move the connection establishment
to occur outside the PG_TRY block; this way we can remove a test for NULL in
PG_FINALLY, and it also makes the code more consistent with similar code in
the same file.
Author: Peter Smith <peter.b.smith@fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
The usual behavior for functions in ruleutils.c is to return NULL when
the object does not exist. pg_get_statisticsobjdef_expressions raised an
error instead, so correct that.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20210505210947.GA27406%40telsasoft.com
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
The all_visible_according_to_vm variable's value is inherently prone to
becoming invalidated concurrently, since it is set before we even
acquire a lock on a related heap page buffer.
Oversight in commit 7136bf34, which added the assertion in passing.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Tang <tanghy.fnst@fujitsu.com>
Diagnosed-By:: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDzgc8_MYrA5m1fyydomw_eVKtQiYh7sfDK4KEhdMsf_g@mail.gmail.com
In d6b8d29419 I (Álvaro) was sloppy about recording whether a
partition descripor does or does not include detached partitions, when
the snapshot checking does not see the pg_inherits row marked detached.
In that case no partition was omitted, yet in the relcache entry we were
saving the partdesc as omitting partitions. Flip that (so we save it as
a partdesc not omitting partitions, which indeed it doesn't), which
hopefully makes the code easier to reason about.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqE7GxGU4VdzwZzfiz+Ont5SsopoFkgtrZGEdPqWRL+biA@mail.gmail.com
Currently, replication slot statistics are updated at prepare, commit, and
rollback. Now, if the transaction is interrupted the stats might not get
updated. Fixed this by updating replication statistics after every
stream/spill.
In passing update the docs to change the description of some of the slot
stats.
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Update checklist to reflect current practice:
* The platform-specific FAQ files are long gone.
* We've never routinely updated the libbind code we borrowed, either,
and there seems no reason to start now.
* Explain current practice of running pgindent twice per cycle.
Discussion: https://postgr.es/m/4038398.1620238684@sss.pgh.pa.us
During decoding of an in-progress or prepared transaction, we detect
concurrent abort with an error code ERRCODE_TRANSACTION_ROLLBACK. That is
not sufficient because a callback can decide to throw that error code
at other times as well.
Reported-by: Tom Lane
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1KCjPRS4aZHB48QMM4J8XOC1+TD8jo-4Yu84E+MjwqVhA@mail.gmail.com
When ALTER TABLE .. ALTER CONSTRAINT changes deferrability properties
changed in a partitioned table, we failed to propagate those changes
correctly to partitions and to triggers. Repair by adding a recursion
mechanism to affect all derived constraints and all derived triggers.
(In particular, recurse to partitions even if their respective parents
are already in the desired state: it is possible for the partitions to
have been altered individually.) Because foreign keys involve tables in
two sides, we cannot use the standard ALTER TABLE recursion mechanism,
so we invent our own by following pg_constraint.conparentid down.
When ALTER TABLE .. ALTER CONSTRAINT is invoked on the derived
pg_constraint object that's automaticaly created in a partition as a
result of a constraint added to its parent, raise an error instead of
pretending to work and then failing to modify all the affected triggers.
Before this commit such a command would be allowed but failed to affect
all triggers, so it would silently misbehave. (Restoring dumps of
existing databases is not affected, because pg_dump does not produce
anything for such a derived constraint anyway.)
Add some tests for the case.
Backpatch to 11, where foreign key support was added to partitioned
tables by commit 3de241dba8. (A related change is commit f56f8f8da6
in pg12 which added support for FKs *referencing* partitioned tables;
this is what forces us to use an ad-hoc recursion mechanism for this.)
Diagnosed by Tom Lane from bug report from Ron L Johnson. As of this
writing, no reviews were offered.
Discussion: https://postgr.es/m/75fe0761-a291-86a9-c8d8-4906da077469@gmail.com
Discussion: https://postgr.es/m/3144850.1607369633@sss.pgh.pa.us
The OID of the constraint is used instead of the OID of the trigger --
an easy mistake to make. Apparently the object-alter hooks are not very
well tested :-(
Backpatch to 12, where this typo was introduced by 578b229718
Discussion: https://postgr.es/m/20210503231633.GA6994@alvherre.pgsql
When running ALTER TABLE t2 INHERIT t1, we must check that columns in
t2 that correspond to a generated column in t1 are also generated and
have the same generation expression. Otherwise, this would allow
creating setups that a normal CREATE TABLE sequence would not allow.
Discussion: https://www.postgresql.org/message-id/22de27f6-7096-8d96-4619-7b882932ca25@2ndquadrant.com
Properly fix:
- the "ONLY" in FROM [ONLY] isn't hashed
- the agglevelsup field in GROUPING isn't hashed
- WITH TIES not being hashed (new in PG 13)
- "DISTINCT" in "GROUP BY [DISTINCT]" isn't hashed (new in PG 14)
Reported-by: Julien Rouhaud
Discussion: https://postgr.es/m/20210425081119.ulyzxqz23ueh3wuj@nol
Commit 824bf7190 introduced a new search of the NFAs generated by
regex compilation. I failed to think hard about the performance
characteristics of that search, with the predictable outcome
that it's bad: weird regexes can trigger exponential search time.
Worse, there's no check-for-interrupt in that code, so you can't
even cancel the query if this happens.
Fix by introducing memo-ization of the search results, so that any one
NFA state need be examined in detail just once. This potentially uses
a lot of memory, but we can bound the memory usage by putting a limit
on the number of states for which we'll try to prove match-all-ness.
That is sane because we already have a limit (DUPINF) on the maximum
finite string length that a matchall regex can match; and patterns
that involve much more than DUPINF states would probably exceed that
limit anyway.
Also, rearrange the logic so that we check the basic is-the-graph-
all-RAINBOW-arcs property before we start the recursive search to
determine path lengths. This will ensure that we fall out quickly
whenever the NFA couldn't possibly be matchall.
Also stick in a check-for-interrupt, just in case these measures
don't completely eliminate the risk of slowness.
Discussion: https://postgr.es/m/3483895.1619898362@sss.pgh.pa.us
If dtrace is compiled in but disabled, the lwlock dtrace probes still
evaluate their arguments. Since PostgreSQL 13, T_NAME(lock) does
nontrivial work, so it should be avoided if not needed. To fix, make
these calls conditional on the *_ENABLED() macro corresponding to each
probe.
Reviewed-by: Craig Ringer <craig.ringer@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/CAGRY4nwxKUS_RvXFW-ugrZBYxPFFM5kjwKT5O+0+Stuga5b4+Q@mail.gmail.com
Previously, we were using the size of all the changes present in
ReorderBuffer to compute total_bytes after decoding a transaction and that
can lead to counting some of the transactions' changes more than once. Fix
it by using the size of the changes decoded for a transaction to compute
'total_bytes'.
Author: Sawada Masahiko
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
websearch_to_tsquery() splits text in quotes into tokens and connects them with
phrase operator on its own. However, that leads to surprising results when the
token contains no words.
For instance, websearch_to_tsquery('"aaa: bbb"') is 'aaa <2> bbb', because
it is equivalent of to_tsquery(E'aaa <-> \':\' <-> bbb'). But
websearch_to_tsquery('"aaa: bbb"') has to be 'aaa <-> bbb' in order to match
to_tsvector('aaa: bbb').
Since 0c4f355c6a, we anyway connect lexemes of complex tokens with phrase
operators. Thus, let's just websearch_to_tsquery() parse text in quotes as
a single token. Therefore, websearch_to_tsquery() should process the quoted
text in the same way phraseto_tsquery() does. This solution is what we exactly
need and also simplifies the code.
This commit is an incompatible change, so we don't backpatch it.
Reported-by: Valentin Gatien-Baron
Discussion: https://postgr.es/m/CA%2B0DEqiZs7gdOd4ikmg%3D0UWG%2BSwWOLxPsk_JW-sx9WNOyrb0KQ%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane, Zhihong Yu
Reject aggregates, window functions, and procedures. Aggregates
failed anyway, though with a somewhat obscure error message.
Window functions would hit an Assert or null-pointer dereference.
Procedures seemed to work as long as you didn't try to do
transaction control, but (a) transaction control is sort of the
point of a procedure, and (b) it's not entirely clear that no
bugs lurk in that path. Given the lack of testing of this area,
it seems safest to be conservative in what we support.
Also reject proretset functions, as the fastpath protocol can't
support returning a set.
Also remove an easily-triggered assertion that the given OID
isn't 0; the subsequent lookups can handle that case themselves.
Per report from Theodor-Arsenij Larionov-Trichkin.
Back-patch to all supported branches. (The procedure angle
only applies in v11+, of course.)
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
There were two problems:
a. We were always selecting the next available txn instead of selecting it
when it is larger than the previous transaction.
b. We were selecting the transactions which haven't made any changes to
the database (base snapshot is not set). Later it was hitting an Assert
because we don't decode such transactions and the changes in txn remain as
it is. It is better not to choose such transactions for streaming in the
first place.
Reported-by: Haiying Tang
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB61133B94E63177040F7ECDA1FB429@OS0PR01MB6113.jpnprd01.prod.outlook.com
Here we adjust the EXPLAIN ANALYZE output for Result Cache so that we
don't show any Result Cache stats for parallel workers who don't
contribute anything to Result Cache plan nodes.
I originally had ideas that workers who don't help could still have their
Result Cache stats displayed. The idea with that was so that I could
write some parallel Result Cache regression tests that show the EXPLAIN
ANALYZE output. However, I realized a little too late that such tests
would just not be possible to have run in a stable way on the buildfarm.
With that knowledge, before 9eacee2e6 went in, I had removed all of the
tests that were showing the EXPLAIN ANALYZE output of a parallel Result
Cache plan, however, I forgot to put back the code that adjusts the
EXPLAIN output to hide the Result Cache stats for parallel workers who
were not fast enough to help out before query execution was over. All
other nodes behave this way and so should Result Cache.
Additionally, with this change, it now seems safe enough to remove the SET
force_parallel_mode = off that I had added to the regression tests.
Also, perform some cleanup in the partition_prune tests. I had adjusted
the explain_parallel_append() function to sanitize the Result Cache
EXPLAIN ANALYZE output. However, since I didn't actually include any
parallel Result Cache tests that show their EXPLAIN ANALYZE output, that
code does nothing and can be removed.
In passing, move the setting of memPeakKb into the scope where it's used.
Reported-by: Amit Khandekar
Author: David Rowley, Amit Khandekar
Discussion: https://postgr.es/m/CAJ3gD9d8SkfY95GpM1zmsOtX2-Ogx5q-WLsf8f0ykEb0hCRK3w@mail.gmail.com
Don't advocate dropping a whole table when dropping a column would
serve. While at it, try to make the layout of these messages a
bit cleaner and more consistent.
Per suggestion from Daniel Gustafsson. No back-patch, as we generally
don't like to churn translatable messages in released branches.
Discussion: https://postgr.es/m/2798740.1619622555@sss.pgh.pa.us
Commits 29aeda6e4 et al closed up some oversights involving not checking
for non-upgradable types within container types, such as arrays and
ranges. However, I only looked at version.c, failing to notice that
there were substantially-equivalent tests in check.c. (The division
of responsibility between those files is less than clear...)
In addition, because genbki.pl does not guarantee that auto-generated
rowtype OIDs will hold still across versions, we need to consider that
the composite type associated with a system catalog or view is
non-upgradable. It seems unlikely that someone would have a user
column declared that way, but if they did, trying to read it in another
PG version would likely draw "no such pg_type OID" failures, thanks
to the type OID embedded in composite Datums.
To support the composite and reg*-type cases, extend the recursive
query that does the search to allow any base query that returns
a column of pg_type OIDs, rather than limiting it to exactly one
starting type.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/2798740.1619622555@sss.pgh.pa.us
Improve the wording in the connection type section of
pg_hba.conf.sample a bit. After the hostgssenc part was added on, the
whole thing became a bit wordy, and it's also a bit inaccurate for
example in that the current wording for "host" appears to say that it
does not apply to GSS-encrypted connections.
Discussion: https://www.postgresql.org/message-id/flat/fc06dcc5-513f-e944-cd07-ba51dd7c6916%40enterprisedb.com
We had a report of confusing server behavior caused by a client bug
that sent junk to the server: the server thought the junk was a
very long message length and waited patiently for data that would
never come. We can reduce the risk of that by being less trusting
about message lengths.
For a long time, libpq has had a heuristic rule that it wouldn't
believe large message size words, except for a small number of
message types that are expected to be (potentially) long. This
provides some defense against loss of message-boundary sync and
other corrupted-data cases. The server does something similar,
except that up to now it only limited the lengths of messages
received during the connection authentication phase. Let's
do the same as in libpq and put restrictions on the allowed
length of all messages, while distinguishing between message
types that are expected to be long and those that aren't.
I used a limit of 10000 bytes for non-long messages. (libpq's
corresponding limit is 30000 bytes, but given the asymmetry of
the FE/BE protocol, there's no good reason why the numbers should
be the same.) Experimentation suggests that this is at least a
factor of 10, maybe a factor of 100, more than we really need;
but plenty of daylight seems desirable to avoid false positives.
In any case we can adjust the limit based on beta-test results.
For long messages, set a limit of MaxAllocSize - 1, which is the
most that we can absorb into the StringInfo buffer that the message
is collected in. This just serves to make sure that a bogus message
size is reported as such, rather than as a confusing gripe about
not being able to enlarge a string buffer.
While at it, make sure that non-mainline code paths (such as
COPY FROM STDIN) are as paranoid as SocketBackend is, and validate
the message type code before believing the message length.
This provides an additional guard against getting stuck on corrupted
input.
Discussion: https://postgr.es/m/2003757.1619373089@sss.pgh.pa.us
Makes partition descriptor acquisition faster during the transient
period in which a partition is in the process of being detached.
This also adds the restriction that only one partition can be in
pending-detach state for a partitioned table.
While at it, return find_inheritance_children() API to what it was
before 71f4c8c6f7, and create a separate
find_inheritance_children_extended() that returns detailed info about
detached partitions.
(This incidentally fixes a bug in 8aba932251 whereby a memory context
holding a transient partdesc is reparented to a NULL PortalContext,
leading to permanent leak of that memory. The fix is to no longer rely
on reparenting contexts to PortalContext. Reported by Amit Langote.)
Per gripe from Amit Langote
Discussion: https://postgr.es/m/CA+HiwqFgpP1LxJZOBYGt9rpvTjXXkg5qG2+Xch2Z1Q7KrqZR1A@mail.gmail.com
Attempting to use this function with event triggers failed, as, since
its introduction in a676201, this code has never associated an object
name with event triggers. This addresses the failure by adding the
event trigger name to the set defining its object address.
Note that regression tests are added within event_trigger and not
object_address to avoid issues with concurrent connections in parallel
schedules.
Author: Joel Jacobson
Discussion: https://postgr.es/m/3c905e77-a026-46ae-8835-c3f6cd1d24c8@www.fastmail.com
Backpatch-through: 9.6
Handle the situation where perl swaps the order of operands of
the comparison operator. See `perldoc overload` for details:
The third argument is set to TRUE if (and only if) the two
operands have been swapped. Perl may do this to ensure that the
first argument ($self) is an object implementing the overloaded
operation, in line with general object calling conventions.
Commit 8ff1c94649 allowed TRUNCATE command to truncate foreign tables.
Previously the information about "ONLY" options specified in TRUNCATE
command were passed to the foreign data wrapper. Then postgres_fdw
constructed the TRUNCATE command to issue the remote server and
included "ONLY" options in it based on the passed information.
On the other hand, "ONLY" options specified in SELECT, UPDATE or DELETE
have no effect when accessing or modifying the remote table, i.e.,
are not passed to the foreign data wrapper. So it's inconsistent to
make only TRUNCATE command pass the "ONLY" options to the foreign data
wrapper. Therefore this commit changes the TRUNCATE command so that
it doesn't pass the "ONLY" options to the foreign data wrapper,
for the consistency with other statements. Also this commit changes
postgres_fdw so that it always doesn't include "ONLY" options in
the TRUNCATE command that it constructs.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Kyotaro Horiguchi, Justin Pryzby, Zhihong Yu
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
The Truncate operation acquires an exclusive lock on the target relation
and indexes. It then waits for logical replication of the operation to
finish at commit. Now because we are acquiring the shared lock on the
target index to get index attributes in pgoutput while sending the
changes for the Truncate operation, it leads to a deadlock.
Actually, we don't need to acquire a lock on the target index as we build
the cache entry using a historic snapshot and all the later changes are
absorbed while decoding WAL. So, we wrote a special purpose function for
logical replication to get a bitmap of replica identity attribute numbers
where we get that information without locking the target index.
We decided not to backpatch this as there doesn't seem to be any field
complaint about this issue since it was introduced in commit 5dfd1e5a in
v11.
Reported-by: Haiying Tang
Author: Takamichi Osumi, test case by Li Japin
Reviewed-by: Amit Kapila, Ajin Cherian
Discussion: https://postgr.es/m/OS0PR01MB6113C2499C7DC70EE55ADB82FB759@OS0PR01MB6113.jpnprd01.prod.outlook.com
Commit 2ec993a7c, which added triggers on views, modified the rewriter
to add dummy entries like "SET x = x" for all columns that weren't
actually being updated by the user in any UPDATE directed at a view.
That was needed at the time to produce a complete "NEW" row to pass
to the trigger. Later it was found to cause problems for ordinary
updatable views, so commit cab5dc5da restricted it to happen only for
trigger-updatable views. But in the wake of commit 86dc90056, we
really don't need it at all. nodeModifyTable.c populates the trigger
"OLD" row from the whole-row variable that is generated for the view,
and then it computes the "NEW" row using that old row and the UPDATE
targetlist. So there is no need for the UPDATE tlist to have dummy
entries, any more than it needs them for regular tables or other
types of views.
(The comments for rewriteTargetListIU suggest that we must do this
for correct expansion of NEW references in rules, but I now think
that that was just lazy comment editing in 2ec993a7c. If we didn't
need it for rules on views before there were triggers, we don't need
it after that.)
This essentially propagates 86dc90056's decision that we don't need
dummy column updates into the view case. Aside from making the
different cases more uniform and hence possibly forestalling future
bugs, it ought to save a little bit of rewriter/planner effort.
Discussion: https://postgr.es/m/2181213.1619397634@sss.pgh.pa.us
The verification of permissions doesn't succeed on Cygwin, because the
required feature is not implemented for Cygwin at the moment. So skip
this part of the test, like MinGW already does.
The tuple routing logic used by a logical replication worker can fire
triggers on relations part of a partition tree, but there was no test
coverage in this area. The existing script 003_constraints.pl included
something, but nothing when a tuple is applied across partitioned tables
on a subscriber.
Author: Amit Langote
Discussion: https://postgr.es/m/OS0PR01MB611383FA0FE92EB9DE21946AFB769@OS0PR01MB6113.jpnprd01.prod.outlook.com
We send the prepare for the concurrently aborted xacts so that later when
rollback prepared is decoded and sent, the downstream should be able to
rollback such a xact. For 'streaming' case (when we send changes for
in-progress transactions), we were sending prepare twice when concurrent
abort was detected.
Author: Peter Smith
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/f82133c6-6055-b400-7922-97dae9f2b50b@enterprisedb.com
This function's behavior for UPDATE on a trigger-updatable view was
justified by analogy to what preptlist.c used to do for UPDATE on
regular tables. Since preptlist.c hasn't done that since 86dc90056,
that argument is no longer sensible, let alone convincing. I think
we do still need it to act that way, so update the comment to explain
why.
This will install amcheck in the database if not present. The default
schema is for the extension is pg_catalog, but this can be overridden by
providing a value for the option.
Mark Dilger, slightly editorialized by me.
(rather divergent)
Discussion: https://postgr.es/m/bdc0f7c2-09e3-ee57-8471-569dfb509234@dunslane.net
As well as 'devel' version_stamp.pl provides for 'alphaN'
'betaN' and 'rcN', so teach PostgresVersion about those.
Also stash the version string instead of trying to reconstruct it during
stringification.
Discussion: https://postgr.es/m/YIHlw5nSgAHs4dK1@paquier.xyz
6f6f284 has introduced a specific macro to make printf()-ing of LSNs
easier. This takes care of what looks like the remaining code paths
that did not get the call.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/YIJS9x6K8ruizN7j@paquier.xyz
Instead, put them in via a format placeholder. This reduces the
number of distinct translatable messages and also reduces the chances
of typos during translation. We already did this for the system call
arguments in a number of cases, so this is just the same thing taken a
bit further.
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
These functions shouldn't receive null arguments: multirange_constructor0()
doesn't have any arguments while multirange_constructor2() has a single array
argument, which is never null.
But mark them strict anyway for the sake of uniformity.
Also, make checks for null arguments use elog() instead of ereport() as these
errors should normally be never thrown. And adjust corresponding comments.
Catversion is bumped.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/0f783a96-8d67-9e71-996b-f34a7352eeef%40enterprisedb.com
Commit bbe0a81db6 introduced "INCLUDING COMPRESSION" option
in CREATE TABLE command, but previously TableLikeOption in gram.y and
parsenodes.h didn't classify this new option in alphabetical order
with the rest.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/YHerAixOhfR1ryXa@paquier.xyz
This is cleanup for commit 27e1f1456:
* ExecAppendAsyncEventWait(), which was modified a bit further by commit
a8af856d3, duplicated the same nevents calculation. Simplify the code
a little bit to avoid the duplication. Update comments there.
* Add an assertion to ExecAppendAsyncRequest().
* Update a comment about merging the async_capable options from input
relations in merge_fdw_options(), per complaint from Kyotaro Horiguchi.
* Add a comment for fetch_more_data_begin().
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK1637W30Wx3MnrReewhafn6F_0J76mrJGoFXFnpPq4QfvA%40mail.gmail.com
Adopt a more consistent policy about what slot-type-specific
getsysattr functions should do when system attributes are not
available. To wit, they should all throw the same user-oriented
error, rather than variously crashing or emitting developer-oriented
messages.
This closes a identifiable problem in commits a71cfc56b and
3fb93103a (in v13 and v12), so back-patch into those branches,
along with a test case to try to ensure we don't break it again.
It is not known that any of the former crash cases are reachable
in HEAD, but this seems like a good safety improvement in any case.
Discussion: https://postgr.es/m/141051591267657@mail.yandex.ru
Have interested callers of find_inheritance_children set the
detached_exist value to false prior to calling it, so that that routine
only has to set it true in the rare cases where it is necessary. Don't
touch it otherwise.
Per buildfarm member thorntail (which reported a UBSan failure here).
During queries coming from ri_triggers.c, we need to omit partitions
that are marked pending detach -- otherwise, the RI query is tricked
into allowing a row into the referencing table whose corresponding row
is in the detached partition. Which is bogus: once the detach operation
completes, the row becomes an orphan.
However, the code was not doing that in repeatable-read transactions,
because relcache kept a copy of the partition descriptor that included
the partition, and used it in the RI query. This commit changes the
partdesc cache code to only keep descriptors that aren't dependent on
a snapshot (namely: those where no detached partition exist, and those
where detached partitions are included). When a partdesc-without-
detached-partitions is requested, we create one afresh each time; also,
those partdescs are stored in PortalContext instead of
CacheMemoryContext.
find_inheritance_children gets a new output *detached_exist boolean,
which indicates whether any partition marked pending-detach is found.
Its "include_detached" input flag is changed to "omit_detached", because
that name captures desired the semantics more naturally.
CreatePartitionDirectory() and RelationGetPartitionDesc() arguments are
identically renamed.
This was noticed because a buildfarm member that runs with relcache
clobbering, which would not keep the improperly cached partdesc, broke
one test, which led us to realize that the expected output of that test
was bogus. This commit also corrects that expected output.
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3269784.1617215412@sss.pgh.pa.us
A new PostgresVersion object type is created and this is used in
PostgresNode using the output of `pg_config --version` and the result
stored in the PostgresNode object. This object can be compared to other
PostgresVersion objects, or to a number or string.
PostgresNode is currently believed to be compatible with versions down
to release 12, so PostgresNode will issue a warning if used with a
version prior to that.
No attempt has been made to deal with incompatibilities in older
versions - that remains work to be undertaken in a subsequent
development cycle.
Based on code from Mark Dilger and Jehan-Guillaume de Rorthais.
Discussion: https://postgr.es/m/a80421c0-3d7e-def1-bcfe-24777f15e344@dunslane.net
Creating a trigger on a relation to which an apply operation is
triggered would cause a relation leak once the change gets committed,
as the executor would miss that the relation needs to be closed
beforehand. This issue got introduced with the refactoring done in
1375422c, where it becomes necessary to track relations within
es_opened_result_relations to make sure that they are closed.
We have discussed using ExecInitResultRelation() coupled with
ExecCloseResultRelations() for the relations in need of tracking by the
apply operations in the subscribers, which would simplify greatly the
opening and closing of indexes, but this requires a larger rework and
reorganization of the worker code, particularly for the tuple routing
part. And that's not really welcome post feature freeze. So, for now,
settle down to the same solution as TRUNCATE which is to fill in
es_opened_result_relations with the relation opened, to make sure that
ExecGetTriggerResultRel() finds them and that they get closed.
The code is lightly refactored so as a relation is not registered three
times for each DML code path, making the whole a bit easier to follow.
Reported-by: Tang Haiying, Shi Yu, Hou Zhijie
Author: Amit Langote, Masahiko Sawada, Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB611383FA0FE92EB9DE21946AFB769@OS0PR01MB6113.jpnprd01.prod.outlook.com
On ALTER TABLE .. DETACH CONCURRENTLY, we add a new table constraint
that duplicates the partition constraint. But if the partition already
has another constraint that implies that one, then that's unnecessary.
We were already avoiding the addition of a duplicate constraint if there
was an exact 'equal' match -- this just improves the quality of the check.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20210410184226.GY6592@telsasoft.com
Since pg_depend can contain duplicate entries, we need to eliminate
those in information schema views that build on pg_depend, using
DISTINCT. Some of the older views already did that correctly, but
some of the more recently added ones didn't. (In some of these views,
it might not be possible to reproduce the issue because of how the
implementation happens to deduplicate dependencies while recording
them, but it seems better to keep this consistent in all cases.)
While tracking down the bug fixed in the preceding commit, I got quite
annoyed by the low quality of spg_desc's output. Add missing fields,
try to make the formatting consistent.
Commit f003d9f87 left this macro with inadequate (or, one could say,
too much) parenthesization. Which was catastrophic to the correctness
of calls such as "if (!XLogRecHasBlockRef(record, 1)) ...". There
are only a few of those, which perhaps explains why we didn't notice
immediately (with our general weakness of WAL replay testing being
another factor). I found it by debugging intermittent replay failures
like
2021-04-08 14:33:30.191 EDT [29463] PANIC: failed to locate backup block with ID 1
2021-04-08 14:33:30.191 EDT [29463] CONTEXT: WAL redo at 0/95D3438 for SPGist/ADD_NODE: off 1; blkref #0: rel 1663/16384/25998, blk 1
log_statement is issued before query_id can be computed, so properly
clear the value, and document the interaction.
Reported-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/YHPkU8hFi4no4NSw@paquier.xyz
Author: Julien Rouhaud
Previously, it was pg_stat_activity.queryid to match the
pg_stat_statements queryid column. This is an adjustment to patch
4f0b0966c8. This also adjusts some of the internal function calls to
match. Catversion bumped.
Reported-by: Álvaro Herrera, Julien Rouhaud
Discussion: https://postgr.es/m/20210408032704.GA7498@alvherre.pgsql
I didn't particularly like this function name, as it fails to
express what's going on. Also, returning the sort expression
alone isn't too helpful --- typically, a caller would also
need some other fields of the EquivalenceMember. But the
sole caller really only needs a bool result, so let's make
it "bool relation_can_be_sorted_early()".
Discussion: https://postgr.es/m/91f3ec99-85a4-fa55-ea74-33f85a5c651f@swarm64.com
An oversight introduced by the incremental-sort patches caused
"could not find pathkey item to sort" errors in some situations
where a sort key involves an aggregate or window function.
The basic problem here is that find_em_expr_usable_for_sorting_rel
isn't properly modeling what prepare_sort_from_pathkeys will do
later. Rather than hoping we can keep those functions in sync,
let's refactor so that they actually share the code for
identifying a suitable sort expression.
With this refactoring, tlist.c's tlist_member_ignore_relabel
is unused. I removed it in HEAD but left it in place in v13,
in case any extensions are using it.
Per report from Luc Vlaming. Back-patch to v13 where the
problem arose.
James Coleman and Tom Lane
Discussion: https://postgr.es/m/91f3ec99-85a4-fa55-ea74-33f85a5c651f@swarm64.com
Commit b34ca595ab provided for installation-aware instances of
PostgresNode. However, it turns out that IPC::Run works against this by
caching the path to a binary and not consulting the path again, even if
it has changed. We work around this by calling Postgres binaries with
the installed path rather than just a bare name to be looked up in the
environment path, if there is an installed path. For the common case
where there is no installed path we continue to use the bare command
name.
Diagnosis and solution from Mark Dilger
Discussion: https://postgr.es/m/E8F512F8-B4D6-4514-BA8D-2E671439DA92@enterprisedb.com
Document VACUUM's soft assumption that any LP_DEAD items encountered
during pruning will become LP_UNUSED items before VACUUM finishes up.
This is integral to the accounting used by VACUUM to generate its final
report on the table to the stats collector. It also affects how VACUUM
determines which heap pages are truncatable. In both cases VACUUM is
concerned with the likely contents of the page in the near future, not
the current contents of the page.
This state of affairs created the false impression that VACUUM's dead
tuple accounting had significant difference with similar accounting used
during ANALYZE. There were and are no substantive differences, at least
when the soft assumption completely works out. This is far clearer now.
Also document cases where things don't quite work out for VACUUM's dead
tuple accounting. It's possible that a significant number of LP_DEAD
items will be left behind by VACUUM, and won't be recorded as remaining
dead tuples in VACUUM's statistics collector report. This behavior
dates back to commit a96c41fe, which taught VACUUM to run without index
and heap vacuuming at the user's request. The failsafe mechanism added
to VACUUM more recently by commit 1e55e7d1 takes the same approach to
dead tuple accounting.
Reported-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=Jmtu18PrsYq3EvvZJGOmZqSO2u3bvKpx9xJa5uhNp=Q@mail.gmail.com
In the new test after resetting the stats, we were not waiting for the
stats message to be delivered. Also, we need to decode the results for
the new test, otherwise, it will show the old stats.
In passing,
a. Change docs added by commit f5fc2f5b23 as per suggestion by
Justin Pryzby.
b. Bump the PGSTAT_FILE_FORMAT_ID as commit f5fc2f5b23 changes the file
format of stats.
Reported-by: Tom Lane based on buildfarm reports
Author: Vignesh C, Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
A couple of tests have been using 0 as magic constant while SEEK_SET can
be used instead. This makes the code easier to understand, and more
consistent with the changes done in 3c5b068.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YHrc24AgJQ6tQ1q0@paquier.xyz
Add a few words of comment to explain why SIGURG doesn't follow the
dummy_handler pattern used for SIGUSR2, since that might otherwise
appear to be a bug.
Discussion: https://postgr.es/m/4006115.1618577212%40sss.pgh.pa.us
As it stands, find_expr_references_walker() pays attention to leaf-node
collation fields while ignoring the input collations of actual function
and operator nodes. That seems exactly backwards from a semantic
standpoint, and it leads to reporting dependencies on collations that
really have nothing to do with the expression's behavior.
Hence, rewrite to look at function input collations instead. This
isn't completely perfect either; it fails to account for the behavior
of record_eq and its siblings. (The previous coding at least gave an
approximation of that, though I think it could be fooled pretty easily
into considering the columns of irrelevant composite types.) We may
be able to improve on this later, but for now this should satisfy the
buildfarm members that didn't like ef387bed8.
In passing fix some oversights in GetTypeCollations(), and get
rid of its duplicative de-duplications. (I'm worried that it's
still potentially O(N^2) or worse, but this makes it a little
better.)
Discussion: https://postgr.es/m/3564817.1618420687@sss.pgh.pa.us
Ooops, forgot to s/system_views.sql/system_functions.sql/g
in this part of 767982e36.
No need for an additional catversion bump, I think, since
these strings are gone by the time initdb finishes.
Discussion: https://postgr.es/m/3956760.1618529139@sss.pgh.pa.us
Adopt the new pre-parsed representation for all built-in and
information_schema SQL-language functions, except for a small
number that can't presently be converted because they have
polymorphic arguments.
This eliminates residual hazards around search-path safety of
these functions, and might provide some small performance benefits
by reducing parsing costs. It seems useful also to provide more
test coverage for the SQL-standard-body feature.
Discussion: https://postgr.es/m/3956760.1618529139@sss.pgh.pa.us
Invent system_functions.sql to carry the function definitions that
were formerly in system_views.sql. The function definitions were
already a quarter of the file and are about to be more, so it seems
appropriate to give them their own home.
In passing, fix an oversight in dfb75e478: it neglected to call
check_input() for system_constraints.sql.
Discussion: https://postgr.es/m/3956760.1618529139@sss.pgh.pa.us
In order to avoid getting old logfile contents certain functions in
PostgresNode were doing one of two things. On Windows it rotated the
logfile and restarted the server, while elsewhere it truncated the log
file. Both of these are unnecessary. We borrow from the buildfarm which
does this instead: note the size of the logfile before we start, and
then when fetching the logfile skip to that position before accumulating
contents. This is spelled differently on Windows but the effect is the
same. This is largely centralized in TestLib's slurp_file function,
which has a new optional parameter, the offset to skip to before
starting to reading the file. Code in the client becomes much neater.
Backpatch to all live branches.
Michael Paquier, slightly modified by me.
Discussion: https://postgr.es/m/YHajnhcMAI3++pJL@paquier.xyz
recordMultipleDependencies had the wrong scope for its "version"
variable, allowing a version label to leak from the collation entry it
was meant for to subsequent non-collation entries. This is relatively
hard to trigger because of the OID-descending order that the inputs
will normally arrive in: subsequent non-collation items will tend to
be pinned. But it can be exhibited easily with a custom collation.
Also, don't special-case the default collation, but instead ignore
pinned-ness of a collation when we've found a version for it. This
avoids creating useless pg_depend entries, and removes a not-very-
future-proof assumption that C, POSIX, and DEFAULT are the only
pinned collations.
A small problem is that, because the default collation may or may
not have a version, the regression tests can't assume anything about
whether dependency entries will be made for it. This seems OK though
since it's now handled just the same as other collations, and we have
test cases for both versioned and unversioned collations.
Fixes oversights in commit 257836a75. Thanks to Julien Rouhaud
for review.
Discussion: https://postgr.es/m/3564817.1618420687@sss.pgh.pa.us
This is only a latent bug, since these calls are only reached for
non-text output formats, and currently none of those will print
the units. Still, we should get it right in case that ever changes.
Justin Pryzby
Discussion: https://postgr.es/m/20210415163846.GA3315@telsasoft.com
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Commit e717a9a18 changed the longstanding rule that prosrc is NOT NULL
because when a SQL-language function is written in SQL-standard style,
we don't currently have anything useful to put there. This seems a poor
decision though, as it could easily have negative impacts on external
PLs (opening them to crashes they didn't use to have, for instance).
SQL-function-related code can just as easily test "is prosqlbody not
null" as "is prosrc null", so there's no real gain there either.
Hence, revert the NOT NULL marking removal and adjust related logic.
For now, we just put an empty string into prosrc for SQL-standard
functions. Maybe we'll have a better idea later, although the
history of things like pg_attrdef.adsrc suggests that it's not
easy to maintain a string equivalent of a node tree.
This also adds an assertion that queryDesc->sourceText != NULL
to standard_ExecutorStart. We'd been silently relying on that
for awhile, so let's make it less silent.
Also fix some overlooked documentation and test cases.
Discussion: https://postgr.es/m/2197698.1617984583@sss.pgh.pa.us
These queries could show unexpected entries if the core system,
or concurrently-running test scripts, created any functions that
would appear in the information_schema views. Restrict them
to showing functions belonging to this test's schema, as the
far-older nearby test case does.
Per experimentation with conversion of some built-in functions
to SQL-function-body style.
6568cef, that introduced the option, had an inconsistent behavior when
it comes to configuration tables set up by pg_extension_config_dump, as
the data of all configuration tables would included in a dump even for
extensions not listed by a set of --extension switches.
The contents dumped changed depending on the schema where an extension
was installed when an extension was not listed. For example, an
extension installed under the public schema would have its configuration
data not dumped even when not listed with --extension, which was
inconsistent with the case of an extension installed on a non-public
schema, where the configuration would be dumped.
Per discussion with Noah, we have settled down to the simple rule of
dumping configuration data of an extension if it is listed in
--extension (default is unchanged and backward-compatible, to dump
everything on sight if there are no extensions directly listed). This
avoids some weird cases where the dumps depended on a --schema for one.
More tests are added to cover the gap, where we cross-check more
behaviors depending on --schema when an extension is not listed.
Reported-by: Noah Misch
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/20210404220802.GA728316@rfd.leadboat.com
We don't need to mention the attribute number in these messages, because
there's a dedicated column for that, but we should mention the toast
value ID, because that's really useful for any follow-up troubleshooting
the user wants to do. This also rewords some of the messages to hopefully
read a little better.
Also, use VARATT_EXTERNAL_GET_POINTER in case we're accessing a TOAST
pointer that isn't aligned on a platform that's fussy about alignment,
so that we don't crash while corruption-checking the user's data.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/7D3B9BF6-50D0-4C30-8506-1C1851C7F96F@enterprisedb.com
This GUC has always been classified as a planner option since its
introduction in 7c944bd, and was listed in postgresql.conf.sample. As
this parameter exists for testing purposes, move it to the section
dedicated to developer parameters and hence remove it from
postgresql.conf.sample. This will avoid any temptation to play with it
on production servers for users that should never really have to touch
this parameter.
The general description used for developer options is reworded a bit, to
take into account the inclusion of force_parallel_mode, per a suggestion
from Tom Lane.
Per discussion between Tom Lane, Bruce Momjian, Justin Pryzby, Bharath
Rupireddy and me.
Author: Justin Pryzby, Tom Lane
Discussion: https://postgr.es/m/20210403152402.GA8049@momjian.us
This will make it consistent with the other usage of slotname in the code.
In the passing, change pgstat_report_replslot signature to use a structure
rather than multiple parameters.
Reported-by: Andres Freund
Author: Vignesh C
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
It seems like a good idea to bypass heap truncation when the wraparound
failsafe mechanism (which was added in commit 1e55e7d1) is in effect.
Deliberately don't bypass heap truncation in the INDEX_CLEANUP=off case,
even though it is similar to the failsafe case. There is already a
separate reloption (and related VACUUM parameter) for that.
Reported-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDWRh6oTN5T8wa+cpZUVpHXET8BJ8Da7WHVHpwkPP6KLg@mail.gmail.com
Previously you could only use unqualified variable names here.
While that's not a functional deficiency, since only the target
table can be referenced, it's a surprising inconsistency with the
rules for partial-index predicates, on which this syntax is
supposedly modeled.
The fix for that is no harder than passing addToRelNameSpace = true
to addNSItemToQuery. However, it's really pretty bogus for
transformOnConflictArbiter and transformOnConflictClause to be
messing with the namespace item for the target table at all.
It's not theirs to manage, it results in duplicative creations of
namespace items, and transformOnConflictClause wasn't even doing
it quite correctly (that coding resulted in two nsitems for the
target table, since it hadn't cleaned out the existing one).
Hence, make transformInsertStmt responsible for setting up the
target nsitem once for both these clauses and RETURNING.
Also, arrange for ON CONFLICT ... UPDATE's "excluded" pseudo-relation
to be added to the rangetable before we run transformOnConflictArbiter.
This produces a more helpful HINT if someone writes "excluded.col"
in the arbiter expression.
Per bug #16958 from Lukas Eder. Although I agree this is a bug,
the consequences are hardly severe, so no back-patch.
Discussion: https://postgr.es/m/16958-963f638020de271c@postgresql.org
Most GUC check hooks that inspect database state have special checks
that prevent them from throwing hard errors for state-dependent issues
when source == PGC_S_TEST. This allows, for example,
"ALTER DATABASE d SET default_text_search_config = foo" when the "foo"
configuration hasn't been created yet. Without this, we have problems
during dump/reload or pg_upgrade, because pg_dump has no idea about
possible dependencies of GUC values and can't ensure a safe restore
ordering.
However, check_role() and check_session_authorization() hadn't gotten
the memo about that, and would throw hard errors anyway. It's not
entirely clear what is the use-case for "ALTER ROLE x SET role = y",
but we've now heard two independent complaints about that bollixing
an upgrade, so apparently some people are doing it.
Hence, fix these two functions to act more like other check hooks
with similar needs. (But I did not change their insistence on
being inside a transaction, as it's still not apparent that setting
either GUC from the configuration file would be wise.)
Also fix check_temp_buffers, which had a different form of the disease
of making state-dependent checks without any exception for PGC_S_TEST.
A cursory survey of other GUC check hooks did not find any more issues
of this ilk. (There are a lot of interdependencies among
PGC_POSTMASTER and PGC_SIGHUP GUCs, which may be a bad idea, but
they're not relevant to the immediate concern because they can't be
set via ALTER ROLE/DATABASE.)
Per reports from Charlie Hornsby and Nathan Bossart. Back-patch
to all supported branches.
Discussion: https://postgr.es/m/HE1P189MB0523B31598B0C772C908088DB7709@HE1P189MB0523.EURP189.PROD.OUTLOOK.COM
Discussion: https://postgr.es/m/20160711223641.1426.86096@wrigleys.postgresql.org
Previously, get_cached_rowtype() cached a pointer to a reference-counted
tuple descriptor from the typcache, relying on the ExprContextCallback
mechanism to release the tupdesc refcount when the expression tree
using the tupdesc was destroyed. This worked fine when it was designed,
but the introduction of within-DO-block COMMITs broke it. The refcount
is logged in a transaction-lifespan resource owner, but plpgsql won't
destroy simple expressions made within the DO block (before its first
commit) until the DO block is exited. That results in a warning about
a leaked tupdesc refcount when the COMMIT destroys the original resource
owner, and then an error about the active resource owner not holding a
matching refcount when the expression is destroyed.
To fix, get rid of the need to have a shutdown callback at all, by
instead caching a pointer to the relevant typcache entry. Those
survive for the life of the backend, so we needn't worry about the
pointer becoming stale. (For registered RECORD types, we can still
cache a pointer to the tupdesc, knowing that it won't change for the
life of the backend.) This mechanism has been in use in plpgsql
and expandedrecord.c since commit 4b93f5799, and seems to work well.
This change requires modifying the ExprEvalStep structs used by the
relevant expression step types, which is slightly worrisome for
back-patching. However, there seems no good reason for extensions
to be familiar with the details of these particular sub-structs.
Per report from Rohit Bhogate. Back-patch to v11 where within-DO-block
COMMITs became a thing.
Discussion: https://postgr.es/m/CAAV6ZkQRCVBh8qAY+SZiHnz+U+FqAGBBDaDTjF2yiKa2nJSLKg@mail.gmail.com
heap_update needs to clear any existing "all visible" flag on
the old tuple's page (and on the new page too, if different).
Per coding rules, to do this it must acquire pin on the appropriate
visibility-map page while not holding exclusive buffer lock;
which creates a race condition since someone else could set the
flag whenever we're not holding the buffer lock. The code is
supposed to handle that by re-checking the flag after acquiring
buffer lock and retrying if it became set. However, one code
path through heap_update itself, as well as one in its subroutine
RelationGetBufferForTuple, failed to do this. The end result,
in the unlikely event that a concurrent VACUUM did set the flag
while we're transiently not holding lock, is a non-recurring
"PANIC: wrong buffer passed to visibilitymap_clear" failure.
This has been seen a few times in the buildfarm since recent VACUUM
changes that added code paths that could set the all-visible flag
while holding only exclusive buffer lock. Previously, the flag
was (usually?) set only after doing LockBufferForCleanup, which
would insist on buffer pin count zero, thus preventing the flag
from becoming set partway through heap_update. However, it's
clear that it's heap_update not VACUUM that's at fault here.
What's less clear is whether there is any hazard from these bugs
in released branches. heap_update is certainly violating API
expectations, but if there is no code path that can set all-visible
without a cleanup lock then it's only a latent bug. That's not
100% certain though, besides which we should worry about extensions
or future back-patch fixes that could introduce such code paths.
I chose to back-patch to v12. Fixing RelationGetBufferForTuple
before that would require also back-patching portions of older
fixes (notably 0d1fe9f74), which is more code churn than seems
prudent to fix a hypothetical issue.
Discussion: https://postgr.es/m/2247102.1618008027@sss.pgh.pa.us
With the Oracle Developer Studio 12.6 compiler, #line directives alter
the current source file location for purposes of #include "..."
directives. Hence, a VPATH build failed with 'cannot find include file:
"specscanner.c"'. With two exceptions, parser-containing directories
already add "-I. -I$(srcdir)"; eliminate the exceptions. Back-patch to
9.6 (all supported versions).
Commit 6f38d4dac3 failed to heed a warning about the stability of the
value pointed to by "otid". The caller is allowed to pass in a pointer to
newtup->t_self, which will be updated during the execution of the
function. Instead, the SSI check should use the value we copy into
oldtup.t_self near the top of the function.
Not a live bug, because newtup->t_self doesn't really get updated until
a bit later, but it was confusing and broke the rule established by the
comment.
Back-patch to 13.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2689164.1618160085%40sss.pgh.pa.us
There are hacks in parse_coerce.c to push down a requested coercion
to below any CollateExpr that may appear. However, we did that even
if the requested data type is non-collatable, leading to an invalid
expression tree in which CollateExpr is applied to a non-collatable
type. The fix is just to drop the CollateExpr altogether, reasoning
that it's useless.
This bug is ten years old, dating to the original addition of
COLLATE support. The lack of field complaints suggests that there
aren't a lot of user-visible consequences. We noticed the problem
because it would trigger an assertion in DefineVirtualRelation if
the invalid structure appears as an output column of a view; however,
in a non-assert build, you don't see a crash just a (subtly incorrect)
complaint about applying collation to a non-collatable type. I found
that by putting the incorrect structure further down in a view, I could
make a view definition that would fail dump/reload, per the added
regression test case. But CollateExpr doesn't do anything at run-time,
so this likely doesn't lead to any really exciting consequences.
Per report from Yulin Pei. Back-patch to all supported branches.
Discussion: https://postgr.es/m/HK0PR01MB22744393C474D503E16C8509F4709@HK0PR01MB2274.apcprd01.prod.exchangelabs.com
Commit 8ff1c94649 extended TRUNCATE command so that it can also truncate
foreign tables. But it forgot to support tab-complete for TRUNCATE on
foreign tables. That is, previously tab-complete for TRUNCATE displayed
only the names of regular tables.
This commit improves tab-complete for TRUNCATE so that it displays also
the names of foreign tables.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
This GUC has already been classified as LOGGING_WHAT, but its location
in postgresql.conf.sample and the documentation did not reflect that, so
fix those inconsistencies.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210404012546.GK6592@telsasoft.com
Using Roman numbers (via "RM" or "rm") for a conversion to calculate a
number of months has never considered the case of negative numbers,
where a conversion could easily cause out-of-bound memory accesses. The
conversions in themselves were not completely consistent either, as
specifying 12 would result in NULL, but it should mean XII.
This commit reworks the conversion calculation to have a more
consistent behavior:
- If the number of months and years is 0, return NULL.
- If the number of months is positive, return the exact month number.
- If the number of months is negative, do a backward calculation, with
-1 meaning December, -2 November, etc.
Reported-by: Theodor Arsenij Larionov-Trichkin
Author: Julien Rouhaud
Discussion: https://postgr.es/m/16953-f255a18f8c51f1d5@postgresql.org
backpatch-through: 9.6
Coverity complained about possible overflow in expressions like
intresult = tm->tm_sec * 1000000 + fsec;
on the grounds that the multiplication would happen in 32-bit
arithmetic before widening to the int64 result. I think these
are all false positives because of the limited possible range of
tm_sec; but nonetheless it seems silly to spell it like that when
nearby lines have the identical computation written with a 64-bit
constant.
... or more accurately, with an LL constant, which is not project
style. Make all of these use INT64CONST(), as we do elsewhere.
This is all new code from a2da77cdb, so no need for back-patch.
We'd previously noted the need for coping with Windows headers
that provide some other definition of macro "ERROR" than elog.h
does. It turns out that R also wants to define ERROR, and
WARNING too. PL/R has been working around this in a hacky way
that broke when we recently changed the numeric value of ERROR.
To let them have a more future-proof solution, provide an
alternate macro PGWARNING for WARNING, and make PGERROR visible
always, not only when #ifdef WIN32.
Discussion: https://postgr.es/m/CADK3HHK6iMChd1yoOqssxBn5Z14Zar8Ztr3G-N_fuG7F8YTP3w@mail.gmail.com
The path for *exprs != NIL would misbehave, and likely crash,
since pull_varattnos expects its last argument to be valid
at call.
Found by Coverity --- we have no coverage of this path in
the regression tests.
ExecuteTruncate() filters out the duplicate tables specified
in the TRUNCATE command, for example in the case where "TRUNCATE foo, foo"
is executed. Such duplicate tables obviously don't need to be opened
and closed because they are skipped. But previously it always opened
the tables before checking whether they were duplicated ones or not,
and then closed them if they were. That is, the duplicated tables were
opened and closed unnecessarily.
This commit changes ExecuteTruncate() so that it opens the table
after it confirms that table is not duplicated one, which leads to
avoid unnecessary table open/close.
Do not back-patch because such unnecessary table open/close is not
a bug though it exists in older versions.
Author: Bharath Rupireddy
Reviewed-by: Amul Sul, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACUdBO_sXJTa08OZ0YT0qk7F_gAmRa9hT4dxRcgPS4nsZA@mail.gmail.com
Commit 438fc4a39c prevented the WAL replay from writing
COMMIT_TS_SETTS record. By this change there is no code that
generates COMMIT_TS_SETTS record in PostgreSQL core.
Also we can think that there are no extensions using the record
because we've not received so far any complaints about the issue
that commit 438fc4a39c fixed. Therefore this commit removes
COMMIT_TS_SETTS record and its related code. Even without
this record, the timestamp required for commit timestamp feature
can be acquired from the COMMIT record.
Bump WAL page magic.
Reported-by: lx zou <zoulx1982@163.com>
Author: Fujii Masao
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/16931-620d0f2fdc6108f1@postgresql.org
Commit c9c41c7a33 used two different
naming patterns. Standardize on the majority pattern, which was the
only pattern in the last reviewed version of that commit.
There were some comments in nodeFuncs.c that, depending on your
interpretation of the word "result", could lead you to believe that the
comments were badly copied and pasted from somewhere else. If you thought
of "result" as the return value of the function that the comment is
written in, then you'd be misled. However, if you'd correctly
interpreted "result" to mean the result type of the given node type,
you'd not have seen any issues.
Here we do a small cleanup to try to prevent any future
misinterpretations. Per wording suggestion from Tom Lane.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvp+Bw=2Qiu5=uXMKfC7gd0+B=4JvexVgGJU=am2g9a1CA@mail.gmail.com
A (relatively minor) annoyance of ErrorResponse/NoticeResponse messages
as printed by PQtrace() is that their length might vary when we move
error messages from one source file to another, one function to another,
or even when their location line numbers change number of digits.
To avoid having to adjust expected files for some tests, make the
regress mode of PQtrace() suppress the length word of NoticeResponse and
ErrorResponse messages.
Discussion: https://postgr.es/m/20210402023010.GA13563@alvherre.pgsql
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
When commit 0827e8af70 added auto-analyze support for partitioned
tables, it included code to obtain reltuples for the partitioned table
as a number of catalog accesses to read pg_class.reltuples for each
partition. That's not only very inefficient, but also problematic
because autovacuum doesn't hold any locks on any of those tables -- and
doesn't want to. Replace that code with a read of pg_class.reltuples
for the partitioned table, and make sure ANALYZE and TRUNCATE properly
maintain that value.
I found no code that would be affected by the change of relpages from
zero to non-zero for partitioned tables, and no other code that should
be maintaining it, but if there is, hopefully it'll be an easy fix.
Per buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/1823909.1617862590@sss.pgh.pa.us
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
Several buildfarm critters that don't usually produce such
warnings are complaining about e717a9a18. I think it's
actually safe, but move initialization to silence the warning.
Ignore parallel workers in pg_stat_statements
Oversight in 4f0b0966c8 which exposed queryid in parallel workers.
Counters are aggregated by the main backend process so parallel workers
would report duplicated activity, and could also report activity for the
wrong entry as they are only aware of the top level queryid.
Fix thinko in pg_stat_get_activity when retrieving the queryid.
Remove unnecessary call to pgstat_report_queryid().
Reported-by: Amit Kapila, Andres Freund, Thomas Munro
Discussion: https://postgr.es/m/20210408051735.lfbdzun5zdlax5gd@alap3.anarazel.dep634GTSOqnDW86Owrn6qDAVosC5dJjXjp7BMfc5Gz1Q@mail.gmail.com
Author: Julien Rouhaud
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
ScalarArrayOpExprs with "useOr=true" and a set of Consts on the righthand
side have traditionally been evaluated by using a linear search over the
array. When these arrays contain large numbers of elements then this
linear search could become a significant part of execution time.
Here we add a new method of evaluating ScalarArrayOpExpr expressions to
allow them to be evaluated by first building a hash table containing each
element, then on subsequent evaluations, we just probe that hash table to
determine if there is a match.
The planner is in charge of determining when this optimization is possible
and it enables it by setting hashfuncid in the ScalarArrayOpExpr. The
executor will only perform the hash table evaluation when the hashfuncid
is set.
This means that not all cases are optimized. For example CHECK constraints
containing an IN clause won't go through the planner, so won't get the
hashfuncid set. We could maybe do something about that at some later
date. The reason we're not doing it now is from fear that we may slow
down cases where the expression is evaluated only once. Those cases can
be common, for example, a single row INSERT to a table with a CHECK
constraint containing an IN clause.
In the planner, we enable this when there are suitable hash functions for
the ScalarArrayOpExpr's operator and only when there is at least
MIN_ARRAY_SIZE_FOR_HASHED_SAOP elements in the array. The threshold is
currently set to 9.
Author: James Coleman, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Heikki Linnakangas
Discussion: https://postgr.es/m/CAAaqYe8x62+=wn0zvNKCj55tPpg-JBHzhZFFc6ANovdqFw7-dA@mail.gmail.com
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Teach xlogreader.c to decode its output into a circular buffer, to
support optimizations based on looking ahead.
* XLogReadRecord() works as before, consuming records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros.
* An alternative new interface XLogNextRecord() is added that returns
pointers to DecodedXLogRecord structs that can be examined directly.
* XLogReadAhead() provides a second cursor that lets you see
further ahead, as long as data is available and there is enough space
in the decoding buffer. This returns DecodedXLogRecord pointers to the
caller, but also adds them to a queue of records that will later be
consumed by XLogNextRecord()/XLogReadRecord().
The buffer's size is controlled with wal_decode_buffer_size. The buffer
could potentially be placed into shared memory, for future projects.
Large records that don't fit in the circular buffer are called
"oversized" and allocated separately with palloc().
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
There was some code in gen_prune_steps_from_opexps that needlessly
checked a list was not empty when it clearly had to contain at least one
item. This prompted a further cleanup operation in partprune.c.
Additionally, the previous code could end up adding additional needless
INTERSECT steps. However, those do not appear to be able to cause any
misbehavior.
gen_prune_steps_from_opexps is now no longer in charge of generating
combine pruning steps. Instead, gen_partprune_steps_internal, which
already does some combine step creation has been given the sole
responsibility of generating all combine steps. This means that when
we recursively call gen_partprune_steps_internal, since it always now adds
a combine step when it produces multiple steps, we can just pay attention
to the final step returned.
In passing, do quite a bit of work on the comments to try to more clearly
explain the role of both gen_partprune_steps_internal and
gen_prune_steps_from_opexps. This is fairly complex code so some extra
effort to give any new readers an overview of how things work seems like
a good idea.
Author: Amit Langote
Reported-by: Andy Fan
Reviewed-by: Kyotaro Horiguchi, Andy Fan, Ryan Lambert, David Rowley
Discussion: https://postgr.es/m/CAKU4AWqWoVii+bRTeBQmeVW+PznkdO8DfbwqNsu9Gj4ubt9A6w@mail.gmail.com
This adds a function, pg_wait_for_backend_termination(), and a new
timeout argument to pg_terminate_backend(), which will wait for the
backend to actually terminate (with or without signaling it to do so
depending on which function is called). The default behaviour of
pg_terminate_backend() remains being timeout=0 which does not waiting.
For pg_wait_for_backend_termination() the default wait is 5 seconds.
Author: Bharath Rupireddy
Reviewed-By: Fujii Masao, David Johnston, Muhammad Usama,
Hou Zhijie, Magnus Hagander
Discussion: https://postgr.es/m/CALj2ACUBpunmyhYZw-kXCYs5NM+h6oG_7Df_Tn4mLmmUQifkqA@mail.gmail.com
If you know the ID of a buffer that recently held a block that you would
like to pin, this function can be used check if it's still there. It
can be used to avoid a second lookup in the buffer mapping table after
PrefetchBuffer() reports a cache hit.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, autovacuum would completely ignore partitioned tables, which
is not good regarding analyze -- failing to analyze those tables means
poor plans may be chosen. Make autovacuum aware of those tables by
propagating "changes since analyze" counts from the leaf partitions up
the partitioning hierarchy.
This also introduces necessary reloptions support for partitioned tables
(autovacuum_enabled, autovacuum_analyze_scale_factor,
autovacuum_analyze_threshold). It's unclear how best to document this
aspect.
Author: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAKkQ508_PwVgwJyBY=0Lmkz90j8CmWNPUxgHvCUwGhMrouz6UA@mail.gmail.com
It's far from clear that this is the right approach - but a good
portion of the buildfarm has been red for a few hours, on the last day
of the CF. And this fixes at least the obvious crash. So let's go with
that for now.
Discussion: https://postgr.es/m/20210407225806.majgznh4lk34hjvu%40alap3.anarazel.de
When working on a scan with only a catalog snapshot, we may not have an
ActiveSnapshot set. If we were to come across a detached partition,
that would cause a crash. Fix by only ignoring detached partitions when
there's an active snapshot.
When dealing with overloaded function or operator names, having
to look through a long list of matches is tedious. Let's extend
these commands to allow specification of (input) argument types
to let such results be trimmed down. Each additional argument
is treated the same as the pattern argument of \dT and matched
against the appropriate argument's type name.
While at it, fix \dT (and these new options) to recognize the
usual notation of "foo[]" for "the array type over foo", and
to handle the special abbreviations allowed by the backend
grammar, such as "int" for "integer".
Greg Sabino Mullane, revised rather significantly by me
Discussion: https://postgr.es/m/CAKAnmmLF9Hhu02N+s7uAyLc5J1xZReg72HQUoiKhNiJV3_jACQ@mail.gmail.com
VACUUM has never needed to call ambulkdelete() for each index in cases
where there are precisely zero TIDs in its dead_tuples array by the end
of its first pass over the heap (also its only pass over the heap in
this scenario). Index vacuuming is simply not required when this
happens. Index cleanup will still go ahead, but in practice most calls
to amvacuumcleanup() are usually no-ops when there were zero preceding
ambulkdelete() calls. In short, VACUUM has generally managed to avoid
index scans when there were clearly no index tuples to delete from
indexes. But cases with _close to_ no index tuples to delete were
another matter -- a round of ambulkdelete() calls took place (one per
index), each of which performed a full index scan.
VACUUM now behaves just as if there were zero index tuples to delete in
cases where there are in fact "virtually zero" such tuples. That is, it
can now bypass index vacuuming and heap vacuuming as an optimization
(though not index cleanup). Whether or not VACUUM bypasses indexes is
determined dynamically, based on the just-observed number of heap pages
in the table that have one or more LP_DEAD items (LP_DEAD items in heap
pages have a 1:1 correspondence with index tuples that still need to be
deleted from each index in the worst case).
We only skip index vacuuming when 2% or less of the table's pages have
one or more LP_DEAD items -- bypassing index vacuuming as an
optimization must not noticeably impede setting bits in the visibility
map. As a further condition, the dead_tuples array (i.e. VACUUM's array
of LP_DEAD item TIDs) must not exceed 32MB at the point that the first
pass over the heap finishes, which is also when the decision to bypass
is made. (The VACUUM must also have been able to fit all TIDs in its
maintenance_work_mem-bound dead_tuples space, though with a default
maintenance_work_mem setting it can't matter.)
This avoids surprising jumps in the duration and overhead of routine
vacuuming with workloads where successive VACUUM operations consistently
have almost zero dead index tuples. The number of LP_DEAD items may
well accumulate over multiple VACUUM operations, before finally the
threshold is crossed and VACUUM performs conventional index vacuuming.
Even then, the optimization will have avoided a great deal of largely
unnecessary index vacuuming.
In the future we may teach VACUUM to skip index vacuuming on a per-index
basis, using a much more sophisticated approach. For now we only
consider the extreme cases, where we can be quite confident that index
vacuuming just isn't worth it using simple heuristics.
Also log information about how many heap pages have one or more LP_DEAD
items when autovacuum logging is enabled.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmkebqPd4MVGuPTOS9bMFvp9MDs5cRTCOsv1rQJ3jCbXw@mail.gmail.com
The truncation of the log file, that this set of tests relies on to make
sure that a connection attempt matches with its expected backend log
pattern, fails, as reported by buildfarm member fairywren. Instead of a
truncation, do a rotation of the log file and restart the node. This
will ensure that the connection attempt data is unique for each test.
Discussion: https://postgr.es/m/YG05nCI8x8B+Ad3G@paquier.xyz
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
Add a failsafe mechanism that is triggered by VACUUM when it notices
that the table's relfrozenxid and/or relminmxid are dangerously far in
the past. VACUUM checks the age of the table dynamically, at regular
intervals.
When the failsafe triggers, VACUUM takes extraordinary measures to
finish as quickly as possible so that relfrozenxid and/or relminmxid can
be advanced. VACUUM will stop applying any cost-based delay that may be
in effect. VACUUM will also bypass any further index vacuuming and heap
vacuuming -- it only completes whatever remaining pruning and freezing
is required. Bypassing index/heap vacuuming is enabled by commit
8523492d, which made it possible to dynamically trigger the mechanism
already used within VACUUM when it is run with INDEX_CLEANUP off.
It is expected that the failsafe will almost always trigger within an
autovacuum to prevent wraparound, long after the autovacuum began.
However, the failsafe mechanism can trigger in any VACUUM operation.
Even in a non-aggressive VACUUM, where we're likely to not advance
relfrozenxid, it still seems like a good idea to finish off remaining
pruning and freezing. An aggressive/anti-wraparound VACUUM will be
launched immediately afterwards. Note that the anti-wraparound VACUUM
that follows will itself trigger the failsafe, usually before it even
begins its first (and only) pass over the heap.
The failsafe is controlled by two new GUCs: vacuum_failsafe_age, and
vacuum_multixact_failsafe_age. There are no equivalent reloptions,
since that isn't expected to be useful. The GUCs have rather high
defaults (both default to 1.6 billion), and are expected to generally
only be used to make the failsafe trigger sooner/more frequently.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmgH3ySGYeC-m-eOBsa2=sDwa292-CFghV4rESYo39FsQ@mail.gmail.com
Use the in-core query id computation for pg_stat_activity,
log_line_prefix, and EXPLAIN VERBOSE.
Similar to other fields in pg_stat_activity, only the queryid from the
top level statements are exposed, and if the backends status isn't
active then the queryid from the last executed statements is displayed.
Add a %Q placeholder to include the queryid in log_line_prefix, which
will also only expose top level statements.
For EXPLAIN VERBOSE, if a query identifier has been computed, either by
enabling compute_query_id or using a third-party module, display it.
Bump catalog version.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
First, don't perform database access while holding a buffer lock.
When checking a heap, we can validate that TOAST pointers are sane by
performing a scan on the TOAST index and looking up the chunks that
correspond to each value ID that appears in a TOAST poiner in the main
table. But, to do that while holding a buffer lock at least risks
causing other backends to wait uninterruptibly, and probably can cause
undetected and uninterruptible deadlocks. So, instead, make a list of
checks to perform while holding the lock, and then perform the checks
after releasing it.
Second, adjust things so that we don't try to follow TOAST pointers
for tuples that are already eligible to be pruned. The TOAST tuples
become eligible for pruning at the same time that the main tuple does,
so trying to check them may lead to spurious reports of corruption,
as observed in the buildfarm. The necessary infrastructure to decide
whether or not the tuple being checked is prunable was added by
commit 3b6c1259f9, but it wasn't
actually used for its intended purpose prior to this patch.
Mark Dilger, adjusted by me to avoid a memory leak.
Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com
Add compute_query_id GUC to control whether a query identifier should be
computed by the core (off by default). It's thefore now possible to
disable core queryid computation and use pg_stat_statements with a
different algorithm to compute the query identifier by using a
third-party module.
To ensure that a single source of query identifier can be used and is
well defined, modules that calculate a query identifier should throw an
error if compute_query_id specified to compute a query id and if a query
idenfitier was already calculated.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
Formerly we were pretty lax about what a custom GUC's name could
be; so long as it had at least one dot in it, we'd take it.
However, corner cases such as dashes or equal signs in the name
would cause various bits of functionality to misbehave. Rather
than trying to make the world perfectly safe for that, let's
just require that custom names look like "identifier.identifier",
where "identifier" means something that scan.l would accept
without double quotes.
Along the way, this patch refactors things slightly in guc.c
so that find_option() is responsible for reporting GUC-not-found
cases, allowing removal of duplicative code from its callers.
Per report from Hubert Depesz Lubaczewski. No back-patch,
since the consequences of the problem don't seem to warrant
changing behavior in stable branches.
Discussion: https://postgr.es/m/951335.1612910077@sss.pgh.pa.us
The code in bringetbitmap() simply added the whole matching page range
to the TID bitmap, as determined by pages_per_range, even if some of the
pages were beyond the end of the heap. The query then might fail with
an error like this:
ERROR: could not open file "base/20176/20228.2" (target block
262144): previous segment is only 131021 blocks
In this case, the relation has 262093 pages (131072 and 131021 pages),
but we're trying to acess block 262144, i.e. first block of the 3rd
segment. At that point _mdfd_getseg() notices the preceding segment is
incomplete, and fails.
Hitting this in practice is rather unlikely, because:
* Most indexes use power-of-two ranges, so segments and page ranges
align perfectly (segment end is also a page range end).
* The table size has to be just right, with the last segment being
almost full - less than one page range from full segment, so that the
last page range actually crosses the segment boundary.
* Prefetch has to be enabled. The regular page access checks that
pages are not beyond heap end, but prefetch does not. On older
releases (before 12) the execution stops after hitting the first
non-existent page, so the prefetch distance has to be sufficient
to reach the first page in the next segment to trigger the issue.
Since 12 it's enough to just have prefetch enabled, the prefetch
distance does not matter.
Fixed by not adding non-existent pages to the TID bitmap. Backpatch
all the way back to 9.6 (BRIN indexes were introduced in 9.5, but that
release is EOL).
Backpatch-through: 9.6
By default, have libpq set the TLS extension "Server Name Indication" (SNI).
This allows an SNI-aware SSL proxy to route connections. (This
requires a proxy that is aware of the PostgreSQL protocol, not just
any SSL proxy.)
In the future, this could also allow the server to use different SSL
certificates for different host specifications. (That would require
new server functionality. This would be the client-side functionality
for that.)
Since SNI makes the host name appear in cleartext in the network
traffic, this might be undesirable in some cases. Therefore, also add
a libpq connection option "sslsni" to turn it off.
Discussion: https://www.postgresql.org/message-id/flat/7289d5eb-62a5-a732-c3b9-438cee2cb709%40enterprisedb.com
The previous implementation (from 9afffcb833) had an unnecessary check
on the boundaries of the enum which trigtered compile warnings. To clean
it up, move the pre-existing static assert to a central location and
call that.
Reported-By: Erik Rijkers
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/1056399262.13159.1617793249020@webmailclassic.xs4all.nl
This reverts commit 9f984ba6d2.
It was making the buildfarm unhappy, apparently setting client_min_messages
in a regression test produces different output if log_statement='all'.
Another issue is that I now suspect the bit sortsupport function was in
fact not correct to call byteacmp(). Revert to investigate both of those
issues.
Documentation and comments in code and tests have been using the terms
sensitive/insensitive cursor incorrectly relative to the SQL standard.
(Cursor sensitivity is only relevant for changes made in the same
transaction as the cursor, not for concurrent changes in other
sessions.) Moreover, some of the behavior of PostgreSQL is incorrect
according to the SQL standard, confusing the issue further. (WHERE
CURRENT OF changes are not visible in insensitive cursors, but they
should be.)
This change corrects the terminology and removes the claim that
sensitive cursors are supported. It also adds a test case that checks
the insensitive behavior in a "correct" way, using a change command
not using WHERE CURRENT OF. Finally, it adds the ASENSITIVE cursor
option to select the default asensitive behavior, per SQL standard.
There are no changes to cursor behavior in this patch.
Discussion: https://www.postgresql.org/message-id/flat/96ee8b30-9889-9e1b-b053-90e10c050e85%40enterprisedb.com
Bloom, GIN, GiST and SP-GiST rely on PageInit() to initialize the
contents of a page, and this routine fills entirely a page with zeros
for a size of BLCKSZ, including the special space. Those index AMs have
been using an extra memset() call to fill with zeros the special page
space, or even the whole page, which is not necessary as PageInit()
already does this work, so let's remove them. GiST was not doing this
extra call, but has commented out a system call that did so since
6236991.
While on it, remove one MAXALIGN() for SP-GiST as PageInit() takes care
of that. This makes the whole page initialization logic more consistent
across all index AMs.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Mahendra Singh Thalor
Discussion: https://postgr.es/m/CALj2ACViOo2qyaPT7krWm4LRyRTw9kOXt+g6PfNmYuGA=YHj9A@mail.gmail.com
The "authenticated identity" is the string used by an authentication
method to identify a particular user. In many common cases, this is the
same as the PostgreSQL username, but for some third-party authentication
methods, the identifier in use may be shortened or otherwise translated
(e.g. through pg_ident user mappings) before the server stores it.
To help administrators see who has actually interacted with the system,
this commit adds the capability to store the original identity when
authentication succeeds within the backend's Port, and generates a log
entry when log_connections is enabled. The log entries generated look
something like this (where a local user named "foouser" is connecting to
the database as the database user called "admin"):
LOG: connection received: host=[local]
LOG: connection authenticated: identity="foouser" method=peer (/data/pg_hba.conf:88)
LOG: connection authorized: user=admin database=postgres application_name=psql
Port->authn_id is set according to the authentication method:
bsd: the PostgreSQL username (aka the local username)
cert: the client's Subject DN
gss: the user principal
ident: the remote username
ldap: the final bind DN
pam: the PostgreSQL username (aka PAM username)
password (and all pw-challenge methods): the PostgreSQL username
peer: the peer's pw_name
radius: the PostgreSQL username (aka the RADIUS username)
sspi: either the down-level (SAM-compatible) logon name, if
compat_realm=1, or the User Principal Name if compat_realm=0
The trust auth method does not set an authenticated identity. Neither
does clientcert=verify-full.
Port->authn_id could be used for other purposes, like a superuser-only
extra column in pg_stat_activity, but this is left as future work.
PostgresNode::connect_{ok,fails}() have been modified to let tests check
the backend log files for required or prohibited patterns, using the
new log_like and log_unlike parameters. This uses a method based on a
truncation of the existing server log file, like issues_sql_like().
Tests are added to the ldap, kerberos, authentication and SSL test
suites.
Author: Jacob Champion
Reviewed-by: Stephen Frost, Magnus Hagander, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/c55788dd1773c521c862e8e0dddb367df51222be.camel@vmware.com
The buildfarm members "drongo" and "fairywren" reported that
the regression test (024_archive_recovery.pl) added by commit 9de9294b0c
failed. The cause of this failure is that the test calls $node->init()
without "allows_streaming => 1" and which doesn't add pg_hba.conf
entry for TCP/IP connection from pg_basebackup.
This commit fixes the issue by specifying "allows_streaming => 1"
when calling $node->init().
Author: Fujii Masao
Discussion: https://postgr.es/m/3cc3909d-f779-7a74-c201-f1f7f62c7497@oss.nttdata.com
Delay creation of the projections for INSERT and UPDATE tuples
until they're needed. This saves a pretty fair amount of work
when only some of the partitions are actually touched.
The logic associated with identifying junk columns in UPDATE/DELETE
is moved to another loop, allowing removal of one loop over the
target relations; but it didn't actually change at all.
Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.
Amit Langote, reviewed at different times by Heikki Linnakangas and
myself
Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com
DEBUG was already defined by the MSVC toolchain for "Debug" builds. On
these systems the unconditional #define DEBUG was causing a 'DEBUG': macro
redefinition warning.
Here we rename DEBUG to DEBUG_OUPUT and also get rid of the #define which
defined this constant. This appears to have been left in the code by
mistake.
Discussion: https://postgr.es/m/CAApHDvqTTgDm38s4HRj03nhzhzQ1oMOj-RXFUB1pE6Bj07jyuQ@mail.gmail.com
Arrange to do some things on-demand, rather than immediately during
executor startup, because there's a fair chance of never having to do
them at all:
* Don't open result relations' indexes until needed.
* Don't initialize partition tuple routing, nor the child-to-root
tuple conversion map, until needed.
This wins in UPDATEs on partitioned tables when only some of the
partitions will actually receive updates; with larger partition
counts the savings is quite noticeable. Also, we can remove some
sketchy heuristics in ExecInitModifyTable about whether to set up
tuple routing.
Also, remove execPartition.c's private hash table tracking which
partitions were already opened by the ModifyTable node. Instead
use the hash added to ModifyTable itself by commit 86dc90056.
To allow lazy computation of the conversion maps, we now set
ri_RootResultRelInfo in all child ResultRelInfos. We formerly set it
only in some, not terribly well-defined, cases. This has user-visible
side effects in that now more error messages refer to the root
relation instead of some partition (and provide error data in the
root's column order, too). It looks to me like this is a strict
improvement in consistency, so I don't have a problem with the
output changes visible in this commit.
Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.
Amit Langote, reviewed at different times by Heikki Linnakangas and
myself
Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com
Snapshot caching, introduced in 623a9ba79b, did not increment
xactCompletionCount during subtransaction abort. That could lead to an older
snapshot being reused. That is, at least as far as I can see, not a
correctness issue (for MVCC snapshots there's no difference between "in
progress" and "aborted"). The only difference between the old and new
snapshots would be a newer ->xmax.
While HeapTupleSatisfiesMVCC makes the same visibility determination, reusing
the old snapshot leads HeapTupleSatisfiesMVCC to not set
HEAP_XMIN_INVALID. Which subsequently causes the kill_prior_tuple optimization
to not kick in (via HeapTupleIsSurelyDead() returning false). The performance
effects of doing the same index-lookups over and over again is how the issue
was discovered...
Fix the issue by incrementing xactCompletionCount in
XidCacheRemoveRunningXids. It already acquires ProcArrayLock exclusively,
making that an easy proposition.
Add a test to ensure that kill_prior_tuple prevents index growth when it
involves aborted subtransaction of the current transaction.
Author: Andres Freund
Discussion: https://postgr.es/m/20210406043521.lopeo7bbigad3n6t@alap3.anarazel.de
Discussion: https://postgr.es/m/20210317055718.v6qs3ltzrformqoa%40alap3.anarazel.de
Retry the call to heap_prune_page() in rare cases where there is
disagreement between the heap_prune_page() call and the call to
HeapTupleSatisfiesVacuum() that immediately follows. Disagreement is
possible when a concurrently-aborted transaction makes a tuple DEAD
during the tiny window between each step. This was the only case where
a tuple considered DEAD by VACUUM still had storage following pruning.
VACUUM's definition of dead tuples is now uniformly simple and
unambiguous: dead tuples from each page are always LP_DEAD line pointers
that were encountered just after we performed pruning (and just before
we considered freezing remaining items with tuple storage).
Eliminating the tupgone=true special case enables INDEX_CLEANUP=off
style skipping of index vacuuming that takes place based on flexible,
dynamic criteria. The INDEX_CLEANUP=off case had to know about skipping
indexes up-front before now, due to a subtle interaction with the
special case (see commit dd695979) -- this was a special case unto
itself. Now there are no special cases. And so now it won't matter
when or how we decide to skip index vacuuming: it won't affect how
pruning behaves, and it won't be affected by any of the implementation
details of pruning or freezing.
Also remove XLOG_HEAP2_CLEANUP_INFO records. These are no longer
necessary because we now rely entirely on heap pruning taking care of
recovery conflicts. There is no longer any need to generate recovery
conflicts for DEAD tuples that pruning just missed. This also means
that heap vacuuming now uses exactly the same strategy for recovery
conflicts as index vacuuming always has: REDO routines never need to
process a latestRemovedXid from the WAL record, since earlier REDO of
the WAL record from pruning is sufficient in all cases. The generic
XLOG_HEAP2_CLEAN record type is now split into two new record types to
reflect this new division (these are called XLOG_HEAP2_PRUNE and
XLOG_HEAP2_VACUUM).
Also stop acquiring a super-exclusive lock for heap pages when they're
vacuumed during VACUUM's second heap pass. A regular exclusive lock is
enough. This is correct because heap page vacuuming is now strictly a
matter of setting the LP_DEAD line pointers to LP_UNUSED. No other
backend can have a pointer to a tuple located in a pinned buffer that
can be invalidated by a concurrent heap page vacuum operation.
Heap vacuuming can now be thought of as conceptually similar to index
vacuuming and conceptually dissimilar to heap pruning. Heap pruning now
has sole responsibility for anything involving the logical contents of
the database (e.g., managing transaction status information, recovery
conflicts, considering what to do with HOT chains). Index vacuuming and
heap vacuuming are now only concerned with recycling garbage items from
physical data structures that back the logical database.
Bump XLOG_PAGE_MAGIC due to pruning and heap page vacuum WAL record
changes.
Credit for the idea of retrying pruning a page to avoid the tupgone case
goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
Handling of incompatible clauses while applying extended statistics was
a bit confused - while handling a mix of compatible and incompatible
clauses it sometimes incorrectly treated the incompatible clauses as
compatible, resulting in a crash.
Fixed by reworking the code applying the selected statistics object to
make it easier to understand, and adding a proper compatibility check.
Reported-by: David Rowley
Discussion: https://postgr.es/m/CAApHDvpYT10-nkSp8xXe-nbO3jmoaRyRFHbzh-RWMfAJynqgpQ%40mail.gmail.com
Add a lazy_scan_heap() subsidiary function that handles heap pruning and
tuple freezing: lazy_scan_prune(). This is a great deal cleaner. The
code that remains in lazy_scan_heap()'s per-block loop can now be
thought of as code that either comes before or after the call to
lazy_scan_prune(), which is now the clear focal point. This division is
enforced by the way in which we now manage state. lazy_scan_prune()
outputs state (using its own struct) that describes what to do with the
page following pruning and freezing (e.g., visibility map maintenance,
recording free space in the FSM). It doesn't get passed any special
instructional state from the preamble code, though.
Also cleanly separate the logic used by a VACUUM with INDEX_CLEANUP=off
from the logic used by single-heap-pass VACUUMs. The former case is now
structured as the omission of index and heap vacuuming by a two pass
VACUUM. The latter case goes back to being used only when the table
happens to have no indexes (just as it was before commit a96c41fe).
This structure is much more natural, since the whole point of
INDEX_CLEANUP=off is to skip the index and heap vacuuming that would
otherwise take place. The single-heap-pass case doesn't skip any useful
work, though -- it just does heap pruning and heap vacuuming together
when the table happens to have no indexes.
Both of these changes are preparation for an upcoming patch that
generalizes the mechanism used by INDEX_CLEANUP=off. The later patch
will allow VACUUM to give up on index and heap vacuuming dynamically, as
problems emerge (e.g., with wraparound), so that an affected VACUUM
operation can finish up as soon as possible.
Also fix a very old bug in single-pass VACUUM VERBOSE output. We were
reporting the number of tuples deleted via pruning as a direct
substitute for reporting the number of LP_DEAD items removed in a
function that deals with the second pass over the heap. But that
doesn't work at all -- they're two different things.
To fix, start tracking the total number of LP_DEAD items encountered
during pruning, and use that in the report instead. A single pass
VACUUM will always vacuum away whatever LP_DEAD items a heap page has
immediately after it is pruned, so the total number of LP_DEAD items
encountered during pruning equals the total number vacuumed-away.
(They are _not_ equal in the INDEX_CLEANUP=off case, but that's okay
because skipping index vacuuming is now a totally orthogonal concept to
one-pass VACUUM.)
Also stop reporting the count of LP_UNUSED items in VACUUM VERBOSE
output. This makes the output of VACUUM VERBOSE more consistent with
log_autovacuum's output (because it never showed information about
LP_UNUSED items). VACUUM VERBOSE reported LP_UNUSED items left behind
by the last VACUUM, and LP_UNUSED items created via pruning HOT chains
during the current VACUUM (it never included LP_UNUSED items left behind
by the current VACUUM's second pass over the heap). This makes it
useless as an indicator of line pointer bloat, which must have been the
original intention. (Like the first VACUUM VERBOSE issue, this issue was
arguably an oversight in commit 282d2a03, which added the heap-only
tuple optimization.)
Finally, stop reporting empty_pages in VACUUM VERBOSE output, and start
reporting pages_removed instead. This also makes the output of VACUUM
VERBOSE more consistent with log_autovacuum's output (which does not
show empty_pages, but does show pages_removed). An empty page isn't
meaningfully different to a page that is almost empty, or a page that is
empty but for only a small number of remaining LP_UNUSED items.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
Andrew Gierth reported that it's possible to crash the backend if no
pg_attrdef record is found to match an attribute that has atthasdef set.
AttrDefaultFetch warns about this situation, but then leaves behind
a relation tupdesc that has null "adbin" pointer(s), which most places
don't guard against.
We considered promoting the warning to an error, but throwing errors
during relcache load is pretty drastic: it effectively locks one out
of using the relation at all. What seems better is to leave the
load-time behavior as a warning, but then throw an error in any code
path that wants to use a default and can't find it. This confines
the error to a subset of INSERT/UPDATE operations on the table, and
in particular will at least allow a pg_dump to succeed.
Also, we should fix AttrDefaultFetch to not leave any null pointers
in the tupdesc, because that just creates an untested bug hazard.
While at it, apply the same philosophy of "warn at load, throw error
only upon use of the known-missing info" to CHECK constraints.
CheckConstraintFetch is very nearly the same logic as AttrDefaultFetch,
but for reasons lost in the mists of time, it was throwing ERROR for
the same cases that AttrDefaultFetch treats as WARNING. Make the two
functions more nearly alike.
In passing, get rid of potentially-O(N^2) loops in equalTupleDesc
by making AttrDefaultFetch sort the entries after fetching them,
so that equalTupleDesc can assume that entries in two equal tupdescs
must be in matching order. (CheckConstraintFetch already was sorting
CHECK constraints, but equalTupleDesc hadn't been told about it.)
There's some argument for back-patching this, but with such a small
number of field reports, I'm content to fix it in HEAD.
Discussion: https://postgr.es/m/87pmzaq4gx.fsf@news-spur.riddles.org.uk
Previously if hot standby was enabled, archive recovery exited with
an error when it found WAL generated with wal_level=minimal.
But if hot standby was disabled, it just reported a warning and
continued in that case. Which could lead to data loss or errors
during normal operation. A warning was emitted, but users could
easily miss that and not notice this serious situation until
they encountered the actual errors.
To improve this situation, this commit changes archive recovery
so that it exits with FATAL error when it finds WAL generated with
wal_level=minimal whatever the setting of hot standby. This enables
users to notice the serious situation soon.
The FATAL error is thrown if archive recovery starts from a base
backup taken before wal_level is changed to minimal. When archive
recovery exits with the error, if users have a base backup taken
after setting wal_level to higher than minimal, they can recover
the database by starting archive recovery from that newer backup.
But note that if such backup doesn't exist, there is no easy way to
complete archive recovery, which may make the database server
unstartable and users may lose whole database. The commit adds
the note about this risk into the document.
Even in the case of unstartable database server, previously by just
disabling hot standby users could avoid the error during archive
recovery, forcibly start up the server and salvage data from it.
But note that this commit makes this procedure unavailable at all.
Author: Takamichi Osumi
Reviewed-by: Laurenz Albe, Kyotaro Horiguchi, David Steele, Fujii Masao
Discussion: https://postgr.es/m/OSBPR01MB4888CBE1DA08818FD2D90ED8EDF90@OSBPR01MB4888.jpnprd01.prod.outlook.com
This adds a new function, permute(), that generates pseudorandom
permutations of arbitrary sizes. This can be used to randomly shuffle
a set of values to remove unwanted correlations. For example,
permuting the output from a non-uniform random distribution so that
all the most common values aren't collocated, allowing more realistic
tests to be performed.
Formerly, hash() was recommended for this purpose, but that suffers
from collisions that might alter the distribution, so recommend
permute() for this purpose instead.
Fabien Coelho and Hironobu Suzuki, with additional hacking be me.
Reviewed by Thomas Munro, Alvaro Herrera and Muhammad Usama.
Discussion: https://postgr.es/m/alpine.DEB.2.21.1807280944370.5142@lancre
Adjust the number of events given to WaitEventSetWait() so that it
doesn't exceed the maximum number of events in the WaitEventSet given
to that function (set->nevents_space) in hopes of making the buildfarm
green.
Per valgrind failure report from Tom Lane and the buildfarm.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/3411577.1617289776%40sss.pgh.pa.us
At present, if we want to update publications in a subscription, we
can use SET PUBLICATION. However, it requires supplying all
publications that exists and the new publications. If we want to add
new publications, it's inconvenient. The new syntax only supplies the
new publications. When the refresh is true, it only refreshes the new
publications.
Author: Japin Li <japinli@hotmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/MEYP282MB166939D0D6C480B7FBE7EFFBB6BC0@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
In the tests, after disabling the subscription, we were not waiting for
the replication connection to drop from the publisher. So when the test
was trying to use the same slot to fetch the messages via SQL API, it
sometimes gives an error that the replication slot is active for other
PID.
Per buildfarm.
It seems that in MSVC timeval's tv_sec field is of type long.
localtime() takes a time_t pointer. Since long is 32-bit even on 64-bit
builds in MSVC, passing a long pointer instead of the correct time_t
pointer generated a compiler warning. Fix that.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvoRG25X_=ZCGSPb4KN_j2iu=G2uXsRSg8NBZeuhkOSETg@mail.gmail.com
The previous implementation of EXTRACT mapped internally to
date_part(), which returned type double precision (since it was
implemented long before the numeric type existed). This can lead to
imprecise output in some cases, so returning numeric would be
preferrable. Changing the return type of an existing function is a
bit risky, so instead we do the following: We implement a new set of
functions, which are now called "extract", in parallel to the existing
date_part functions. They work the same way internally but use
numeric instead of float8. The EXTRACT construct is now mapped by the
parser to these new extract functions. That way, dumps of views
etc. from old versions (which would use date_part) continue to work
unchanged, but new uses will map to the new extract functions.
Additionally, the reverse compilation of EXTRACT now reproduces the
original syntax, using the new mechanism introduced in
40c24bfef9.
The following minor changes of behavior result from the new
implementation:
- The column name from an isolated EXTRACT call is now "extract"
instead of "date_part".
- Extract from date now rejects inappropriate field names such as
HOUR. It was previously mapped internally to extract from
timestamp, so it would silently accept everything appropriate for
timestamp.
- Return values when extracting fields with possibly fractional
values, such as second and epoch, now have the full scale that the
value has internally (so, for example, '1.000000' instead of just
'1').
Reported-by: Petr Fedorov <petr.fedorov@phystech.edu>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
The recent refactoring done in c50624c accidentally broke a portion of
the kerberos tests checking after a query, so add its functionality
back. Some inactive SSL tests had their arguments in an incorrect
order, which would cause them to fail if they were to run.
Author: Jacob Champion
Discussion: https://postgr.es/m/4f5b0b3dc0b6fe9ae6a34886b4d4000f61eb567e.camel@vmware.com
The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().
Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.
Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Peter Eisentraut
Michael Paquier
Alvaro Herrera
Tom Lane
Etsuro Fujita
Fujii Masao
Andrew Dunstan
Thomas Munro
David Rowley
Tomas Vondra
Peter Geoghegan
Amit Kapila
Andres Freund
Bruce Momjian
Alexander Korotkov
Noah Misch
Magnus Hagander
Robert Haas
Heikki Linnakangas
Dean Rasheed