ppport.h was only updated in 05798c9f7f (master). Unfortunately my commit
c89f409749 uses PERL_VERSION_LT which came in with that update. Breaking most
buildfarm animals.
I should have noticed that...
We might want to backpatch the ppport update instead, but for now lets get the
buildfarm green again.
Discussion: https://postgr.es/m/20220131015130.shn6wr2fzuymerf6@alap3.anarazel.de
Backpatch: 10-14, master doesn't need it
For older versions we need our own copy of perl's setlocale(), because it was
not exposed (why we need the setlocale in the first place is explained in
plperl_init_interp) . The copy stopped working in 5.28, as some of the used
macros are not public anymore. But Perl_setlocale is available in 5.28, so
use that.
Author: Victor Wagner <vitus@wagner.pp.ru>
Reviewed-By: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/20200501134711.08750c5f@antares.wagner.home
Backpatch: all versions
Although select_common_type() has a failure-return convention, an
apparent successful return just provides a type OID that *might* work
as a common supertype; we've not validated that the required casts
actually exist. In the mainstream use-cases that doesn't matter,
because we'll proceed to invoke coerce_to_common_type() on each input,
which will fail appropriately if the proposed common type doesn't
actually work. However, a few callers didn't read the (nonexistent)
fine print, and thought that if they got back a nonzero OID then the
coercions were sure to work.
This affects in particular the recently-added "anycompatible"
polymorphic types; we might think that a function/operator using
such types matches cases it really doesn't. A likely end result
of that is unexpected "ambiguous operator" errors, as for example
in bug #17387 from James Inform. Another, much older, case is that
the parser might try to transform an "x IN (list)" construct to
a ScalarArrayOpExpr even when the list elements don't actually have
a common supertype.
It doesn't seem desirable to add more checking to select_common_type
itself, as that'd just slow down the mainstream use-cases. Instead,
write a separate function verify_common_type that performs the
missing checks, and add a call to that where necessary. Likewise add
verify_common_type_from_oids to go with select_common_type_from_oids.
Back-patch to v13 where the "anycompatible" types came in. (The
symptom complained of in bug #17387 doesn't appear till v14, but
that's just because we didn't get around to converting || to use
anycompatible till then.) In principle the "x IN (list)" fix could
go back all the way, but I'm not currently convinced that it makes
much difference in real-world cases, so I won't bother for now.
Discussion: https://postgr.es/m/17387-5dfe54b988444963@postgresql.org
Commit 8431e296ea reworked ProcArrayApplyRecoveryInfo to sort XIDs
before adding them to KnownAssignedXids. But the XIDs are sorted using
xidComparator, which compares the XIDs simply as uint32 values, not
logically. KnownAssignedXidsAdd() however expects XIDs in logical order,
and calls TransactionIdFollowsOrEquals() to enforce that. If there are
XIDs for which the two orderings disagree, an error is raised and the
recovery fails/restarts.
Hitting this issue is fairly easy - you just need two transactions, one
started before the 4B limit (e.g. XID 4294967290), the other sometime
after it (e.g. XID 1000). Logically (4294967290 <= 1000) but when
compared using xidComparator we try to add them in the opposite order.
Which makes KnownAssignedXidsAdd() fail with an error like this:
ERROR: out-of-order XID insertion in KnownAssignedXids
This only happens during replica startup, while processing RUNNING_XACTS
records to build the snapshot. Once we reach STANDBY_SNAPSHOT_READY, we
skip these records. So this does not affect already running replicas,
but if you restart (or create) a replica while there are transactions
with XIDs for which the two orderings disagree, you may hit this.
Long-running transactions and frequent replica restarts increase the
likelihood of hitting this issue. Once the replica gets into this state,
it can't be started (even if the old transactions are terminated).
Fixed by sorting the XIDs logically - this is fine because we're dealing
with normal XIDs (because it's XIDs assigned to backends) and from the
same wraparound epoch (otherwise the backends could not be running at
the same time on the primary node). So there are no problems with the
triangle inequality, which is why xidComparator compares raw values.
Investigation and root cause analysis by Abhijit Menon-Sen. Patch by me.
This issue is present in all releases since 9.4, however releases up to
9.6 are EOL already so backpatch to 10 only.
Reviewed-by: Abhijit Menon-Sen
Reviewed-by: Alvaro Herrera
Backpatch-through: 10
Discussion: https://postgr.es/m/36b8a501-5d73-277c-4972-f58a4dce088a%40enterprisedb.com
For authentication method cert, clientcert=verify-full is implied. But
the pg_hba_file_rules entry would incorrectly show clientcert=verify-ca.
Per bug #17354
Reported-By: Feike Steenbergen
Reviewed-By: Jonathan Katz
Backpatch-through: 12
This reverts commits 6051857fc and ed52c3707, but only in the back
branches. Further testing has shown that while those changes do fix
some things, they also break others; in particular, it looks like
walreceivers fail to detect walsender-initiated connection close
reliably if the walsender shuts down this way. We'll keep trying to
improve matters in HEAD, but it now seems unwise to push these changes
into stable releases.
Discussion: https://postgr.es/m/CA+hUKG+OeoETZQ=Qw5Ub5h3tmwQhBmDA=nuNO3KG=zWfUypFAw@mail.gmail.com
8edd0e794 added some code to remove Append and MergeAppend nodes when they
contained a single child node. As it turned out, this was unsafe to do
when the Append/MergeAppend was parallel_aware and the child node was not.
Removing the Append/MergeAppend, in this case, could lead to the child plan
being called multiple times by parallel workers when it was unsafe to do
so.
Here we fix this by just not removing the Append/MergeAppend when the
parallel_aware flag of the parent and child node don't match.
Reported-by: Yura Sokolov
Bug: #17335
Discussion: https://postgr.es/m/b59605fecb20ba9ea94e70ab60098c237c870628.camel%40postgrespro.ru
Backpatch-through: 12, where 8edd0e794 was first introduced
In logical replication mode, a WalSender is supposed to be able
to execute any regular SQL command, as well as the special
replication commands. Poor design of the replication-command
parser caused it to fail in various cases, notably:
* semicolons embedded in a command, or multiple SQL commands
sent in a single message;
* dollar-quoted literals containing odd numbers of single
or double quote marks;
* commands starting with a comment.
The basic problem here is that we're trying to run repl_scanner.l
across the entire input string even when it's not a replication
command. Since repl_scanner.l does not understand all of the
token types known to the core lexer, this is doomed to have
failure modes.
We certainly don't want to make repl_scanner.l as big as scan.l,
so instead rejigger stuff so that we only lex the first token of
a non-replication command. That will usually look like an IDENT
to repl_scanner.l, though a comment would end up getting reported
as a '-' or '/' single-character token. If the token is a replication
command keyword, we push it back and proceed normally with repl_gram.y
parsing. Otherwise, we can drop out of exec_replication_command()
without examining the rest of the string.
(It's still theoretically possible for repl_scanner.l to fail on
the first token; but that could only happen if it's an unterminated
single- or double-quoted string, in which case you'd have gotten
largely the same error from the core lexer too.)
In this way, repl_gram.y isn't involved at all in handling general
SQL commands, so we can get rid of the SQLCmd node type. (In
the back branches, we can't remove it because renumbering enum
NodeTag would be an ABI break; so just leave it sit there unused.)
I failed to resist the temptation to clean up some other sloppy
coding in repl_scanner.l while at it. The only externally-visible
behavior change from that is it now accepts \r and \f as whitespace,
same as the core lexer.
Per bug #17379 from Greg Rychlewski. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17379-6a5c6cfb3f1f5e77@postgresql.org
Without this, we get odd behavior when the previous cycle of
lexing exited in a non-default exclusive state. Every other
copy of this code is aware that it has to do BEGIN(INITIAL),
but repl_scanner.l did not get that memo.
The real-world impact of this is probably limited, since most
replication clients would abandon their connection after getting
a syntax error. Still, it's a bug.
This mistake is old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1874781.1643035952@sss.pgh.pa.us
In the normal configuration where GEQO_DEBUG isn't defined,
recent clang versions have started to complain that geqo_main.c
accumulates the edge_failures count but never does anything
with it. As a minimal back-patchable fix, insert a void cast
to silence this warning. (I'd speculated about ripping out the
GEQO_DEBUG logic altogether, but I don't think we'd wish to
back-patch that.)
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
an annoying compiler warning but changes no behavior. Hence,
back-patch all the way to 9.2.
Discussion: https://postgr.es/m/CA+hUKGLTSZQwES8VNPmWO9AO0wSeLt36OCPDAZTccT1h7Q7kTQ@mail.gmail.com
In sort_inner_and_outer we iterate a list of PathKey elements, but the
variable is declared as (List *). This mistake is benign, because we
only pass the pointer to lcons() and never dereference it.
This exists since ~2004, but it's confusing. So fix and backpatch to all
supported branches.
Backpatch-through: 10
Discussion: https://postgr.es/m/bf3a6ea1-a7d8-7211-0669-189d5c169374%40enterprisedb.com
The syscache lookup may return NULL even for valid OID, for example due
to a concurrent DROP STATISTICS, so a HeapTupleIsValid is necessary.
Without it, it may fail with a segfault.
Reported by Alexander Lakhin, patch by me. Backpatch to 13, where ALTER
STATISTICS ... SET STATISTICS was introduced.
Backpatch-through: 13
Discussion: https://postgr.es/m/17372-bf3b6e947e35ae77%40postgresql.org
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
In libpq and ecpglib, multiple threads can concurrently enter the
initialization logic for message localization. Since we set the
its-done flag before actually doing the work, it'd be possible
for some threads to reach gettext() before anyone has called
bindtextdomain(). Barring bugs in libintl itself, this would not
result in anything worse than failure to localize some early
messages. Nonetheless, it's a bug, and an easy one to fix.
Noted while investigating bug #17299 from Clemens Zeidler
(much thanks to Liam Bowen for followup investigation on that).
It currently appears that that actually *is* a bug in libintl itself,
but that doesn't let us off the hook for this bit.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/17299-7270741958c0b1ab@postgresql.org
Discussion: https://postgr.es/m/CAE7q7Eit4Eq2=bxce=Fm8HAStECjaXUE=WBQc-sDDcgJQ7s7eg@mail.gmail.com
While individual logical rewrite files were synced to disk, the directory was
not. On some filesystems that could lead to loosing directory entries after a
crash.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/867F2E29-2782-4869-970E-B984C6D35A8F@amazon.com
Backpatch: 10-
The logic in charge of writing commit timestamps (enabled with
track_commit_timestamp) for subtransactions had a one-bug bug,
where it would be possible that commit timestamps go missing for the
last subtransaction committed.
While on it, simplify a bit the iteration logic in the loop writing the
commit timestamps, as per suggestions from Kyotaro Horiguchi and Tom
Lane, so as some variable initializations are not part of the loop
itself.
Issue introduced in 73c986a.
Analyzed-by: Alex Kingsborough
Author: Alex Kingsborough, Kyotaro Horiguchi
Discussion: https://postgr.es/m/73A66172-4050-4F2A-B7F1-13508EDA2144@amazon.com
Backpatch-through: 10
Commits 6c4a8903b et al. had a couple of deficiencies:
* The logic I added to Cluster::start to see if a PID file is present
could be fooled by a stale PID file left over from a previous
postmaster. To fix, if we're not sure whether we expect to find a
running postmaster or not, validate the PID using "kill 0".
* 017_shm.pl has a loop in which it just issues repeated Cluster::start
calls; this will fail if some invocation fails but leaves self->_pid
set. Per buildfarm results, the above fix is not enough to make this
safe: we might have "validated" a PID for a postmaster that exits
immediately after we look. Hence, match each failed start call with
a stop call that will get us back to the self->_pid == undef state.
Add a fail_ok option to Cluster::stop to make this work.
Discussion: https://postgr.es/m/CA+hUKGKV6fOHvfiPt8=dOKzvswjAyLoFoJF1iQXMNpi7+hD1JQ@mail.gmail.com
Since the test requires reproducible behavior from VACUUM, and since
DISABLE_PAGE_SKIPPING doesn't actually disable all forms of page
skipping, let's use a temporary table to avoid contention.
Back-patch to 12, like commit 3414099c.
Discussion: https://postgr.es/m/20220120052404.sonrhq3f3qgplpzj%40alap3.anarazel.de
"pg_ctl start" might start a new postmaster and then return failure
anyway, for example if PGCTLTIMEOUT is exceeded. If there is a
postmaster there, it's still incumbent on us to shut it down at
script end, so check for the PID file even though we are about
to fail.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/647439.1642622744@sss.pgh.pa.us
Where we test vacuum_truncate's effects, sometimes this is failing to
truncate as expected on the build farm. That could be explained by page
skipping, so disable it explicitly, with the theory that commit fe246d1c
didn't go far enough.
Back-patch to 12, where the vacuum_truncate tests were added.
Discussion: https://postgr.es/m/CA%2BhUKGLT2UL5_JhmBzUgkdyKfc%3D5J-gJSQJLysMs4rqLUKLAzw%40mail.gmail.com
The original coding (from c33869cc3) failed with "more than one row
returned by a subquery used as an expression" if there were unrelated
triggers of the same tgname on parent partitioned tables. (That's
possible because statement-level triggers don't get inherited.) Fix
by applying LIMIT 1 after sorting the candidates by inheritance level.
Also, wrap the subquery in a CASE so that we don't have to execute it at
all when the trigger is visibly non-inherited. Aside from saving some
cycles, this avoids the need for a confusing and undocumented NULLIF().
While here, tweak the format of the emitted query to look a bit
nicer for "psql -E", and add some explanation of this subquery,
because it badly needs it.
Report and patch by Justin Pryzby (with some editing by me).
Back-patch to v13 where the faulty code came in.
Discussion: https://postgr.es/m/20211217154356.GJ17618@telsasoft.com
It seems highly unlikely that gettext() can be relied on to be
async-signal-safe. psql used to understand that, but someone got
it wrong long ago in the src/bin/scripts/ version of handle_sigint,
and then the bad idea was perpetuated when those two versions were
unified into src/fe_utils/cancel.c.
I'm unsure why there have not been field complaints about this
... maybe gettext() is signal-safe once it's translated at least
one message? But we have no business assuming any such thing.
In cancel.c (v13 and up), I preserved our ability to localize
"Cancel request sent" messages by invoking gettext() before
the signal handler is set up. In earlier branches I just made
src/bin/scripts/ not localize those messages, as psql did then.
(Just for extra unsafety, the src/bin/scripts/ version was
invoking fprintf() from a signal handler. Sigh.)
Noted while fixing signal-safety issues in PQcancel() itself.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
PQcancel() is supposed to be safe to call from a signal handler,
and indeed psql uses it that way. All of the library functions
it uses are specified to be async-signal-safe by POSIX ...
except for strerror. Neither plain strerror nor strerror_r
are considered safe. When this code was written, back in the
dark ages, we probably figured "oh, strerror will just index
into a constant array of strings" ... but in any locale except C,
that's unlikely to be true. Probably the reason we've not heard
complaints is that (a) this error-handling code is unlikely to be
reached in normal use, and (b) in many scenarios, localized error
strings would already have been loaded, after which maybe it's
safe to call strerror here. Still, this is clearly unacceptable.
The best we can do without relying on strerror is to print the
decimal value of errno, so make it do that instead. (This is
probably not much loss of user-friendliness, given that it is
hard to get a failure here.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
Since enum labels have to be single-quoted, this part of the
tab completion machinery got side-swiped by commit cd69ec66c.
A side-effect of that commit is that (at least with some versions
of Readline) the text string passed for completion will omit the
leading quote mark of the enum label literal. Libedit still acts
the same as before, though, so adapt COMPLETE_WITH_ENUM_VALUE so
that it can cope with either convention.
Also, when we fail to find any valid completion, set
rl_completion_suppress_quote = 1. Otherwise readline will
go ahead and append a closing quote, which is unwanted.
Per report from Peter Eisentraut. Back-patch to v13 where
cd69ec66c came in.
Discussion: https://postgr.es/m/8ca82d89-ec3d-8b28-8291-500efaf23b25@enterprisedb.com
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Commit 7745bc352 intended to ensure that whole-row Vars would be
printed with "::type" decoration in all contexts where plain
"var.*" notation would result in star-expansion, notably in
ROW() and VALUES() constructs. However, it missed the case of
INSERT with a single-row VALUES, as reported by Timur Khanjanov.
Nosing around ruleutils.c, I found a second oversight: the
code for RowCompareExpr generates ROW() notation without benefit
of an actual RowExpr, and naturally it wasn't in sync :-(.
(The code for FieldStore also does this, but we don't expect that
to generate strictly parsable SQL anyway, so I left it alone.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/efaba6f9-4190-56be-8ff2-7a1674f9194f@intrans.baku.az
Instead of using a hardcoded or default path to the perl file the .bat
file is a wrapper for, we use a path that means the file is found in
the same directory as the .bat file.
Patch by Anton Voloshin, slightly tweaked by me.
Backpatch to all live branches
Discussion: https://postgr.es/m/2b7a674b-5fb0-d264-75ef-ecc7a31e54f8@postgrespro.ru
We disallow altering a column datatype within a regular table,
if the table's rowtype is used as a column type elsewhere,
because we lack code to go around and rewrite the other tables.
This restriction should apply to partitioned tables as well, but it
was not checked because ATRewriteTables and ATPrepAlterColumnType
were not on the same page about who should do it for which relkinds.
Per bug #17351 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17351-6db1870f3f4f612a@postgresql.org
get_rel_sync_entry(), which is called each time a change needs to be
logically replicated, is a rather hot code path in the WAL sender
sending logical changes. This code path was doing a relcache access on
relkind and relpartition for each logical change, but we only need to
know this information when building or re-building the cached
information for a relation.
Some measurements prove that this is noticeable in perf profiles,
particularly when attempting to replicate changes from relations that
are not published as these cause less overhead in the WAL sender,
delaying further the replication of changes for relations that are
published.
Issue introduced in 83fd453.
Author: Hou Zhijie
Reviewed-by: Kyotaro Horiguchi, Euler Taveira
Discussion: https://postgr.es/m/OS0PR01MB5716E863AA9E591C1F010F7A947D9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Backpatch-through: 13
Under concurrency, it is possible for two sessions to be merrily locking
and releasing a tuple and marking it again as HEAP_XMAX_INVALID all the
while a third session attempts to lock it, miserably fails at it, and
then contemplates life, the universe and everything only to eventually
fail an assertion that said bit is not set. Before SKIP LOCKED that was
indeed a reasonable expectation, but alas! commit df630b0dd5 falsified
it.
This bug is as old as time itself, and even older, if you think time
begins with the oldest supported branch. Therefore, backpatch to all
supported branches.
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Discussion: https://postgr.es/m/CANbhV-FeEwMnN8yuMyss7if1ZKjOKfjcgqB26n8pqu1e=q0ebg@mail.gmail.com
Commit 4ace45677 failed to fix the problem fully, because the
same issue of attempting to fetch a non-returnable index column
can occur when rechecking the indexqual after using a lossy index
operator. Moreover, it broke EXPLAIN for such indexquals (which
indicates a gap in our test cases :-().
Revert the code changes of 4ace45677 in favor of adding a new field
to struct IndexOnlyScan, containing a version of the indexqual that
can be executed against the index-returned tuple without using any
non-returnable columns. (The restrictions imposed by check_index_only
guarantee this is possible, although we may have to recompute indexed
expressions.) Support construction of that during setrefs.c
processing by marking IndexOnlyScan.indextlist entries as resjunk
if they can't be returned, rather than removing them entirely.
(We could alternatively require setrefs.c to look up the IndexOptInfo
again, but abusing resjunk this way seems like a reasonably safe way
to avoid needing to do that.)
This solution isn't great from an API-stability standpoint: if there
are any extensions out there that build IndexOnlyScan structs directly,
they'll be broken in the next minor releases. However, only a very
invasive extension would be likely to do such a thing. There's no
change in the Path representation, so typical planner extensions
shouldn't have a problem.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
If an index has both returnable and non-returnable columns, and one of
the non-returnable columns is an expression using a Var that is in a
returnable column, then a query returning that expression could result
in an index-only scan plan that attempts to read the non-returnable
column, instead of recomputing the expression from the returnable
column as intended.
To fix, redefine the "indextlist" list of an IndexOnlyScan plan node
as containing null Consts in place of any non-returnable columns.
This solves the problem by preventing setrefs.c from falsely matching
to such entries. The executor is happy since it only cares about the
exposed types of the entries, and ruleutils.c doesn't care because a
correct plan won't reference those entries. I considered some other
ways to prevent setrefs.c from doing the wrong thing, but this way
seems good since (a) it allows a very localized fix, (b) it makes
the indextlist structure more compact in many cases, and (c) the
indextlist is now a more faithful representation of what the index AM
will actually produce, viz. nulls for any non-returnable columns.
This is easier to hit since we introduced included columns, but it's
possible to construct failing examples without that, as per the
added regression test. Hence, back-patch to all supported branches.
Per bug #17350 from Louis Jachiet.
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
Fix the code changed by commit 5c056b0c2 so that we always generate
RelabelType, not something else, for a cast to unspecified typmod.
Otherwise planner optimizations might not happen.
It appears we missed this point because the previous experiments were
done on type numeric: the parser undesirably generates a call on the
numeric() length-coercion function, but then numeric_support()
optimizes that down to a RelabelType, so that everything seems fine.
It misbehaves for types that have a non-optimized length coercion
function, such as bpchar.
Per report from John Naylor. Back-patch to all supported branches,
as the previous patch eventually was. Unfortunately, that no longer
includes 9.6 ... we really shouldn't put this type of change into a
nearly-EOL branch.
Discussion: https://postgr.es/m/CAFBsxsEfbFHEkouc+FSj+3K1sHipLPbEC67L0SAe-9-da8QtYg@mail.gmail.com
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
This could only matter if (a) long is wider than int, and (b) the heap
of free blocks exceeds UINT_MAX entries, which seems pretty unlikely.
Still, it's a theoretical bug, so backpatch to v13 where the typo came
in (in commit c02fdc922).
In passing, also make swap_nodes() use consistent datatypes.
Ma Liangzhu
Discussion: https://postgr.es/m/17336-fc4e522d26a750fd@postgresql.org
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
When writing / debugging an isolation test it sometimes is useful to see which
session holds what lock etc. To make it easier, both as part of spec files and
interactively, append the session name to application_name. Since b1907d688
application_name already contains the test name, this appends the session's
name to that.
insert-conflict-specconflict did something like this manually, which can now
be removed.
As we have done lately with other test infrastructure improvements, backpatch
this change, to make it easier to backpatch tests.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20211211012052.2blmzcmxnxqawd2z@alap3.anarazel.de
Backpatch: 10-, to make backpatching of tests easier.
We publish the child table's data twice for a publication that has both
child and parent tables and is published with publish_via_partition_root
as true. This happens because subscribers will initiate synchronization
using both parent and child tables, since it gets both as separate tables
in the initial table list.
Ensure that pg_publication_tables returns only parent tables in such
cases.
Author: Hou Zhijie
Reviewed-by: Greg Nancarrow, Amit Langote, Vignesh C, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
REINDEX CONCURRENTLY run on a toast index or a toast relation could
corrupt the target indexes rebuilt, as a backend running in parallel
that manipulates toast values would directly release the lock on the
toast relation when its local operation is done, rather than releasing
the lock once the transaction that manipulated the toast values
committed.
The fix done here is simple: we now hold a ROW EXCLUSIVE lock on the
toast relation when saving or deleting a toast value until the
transaction working on them is committed, so as a concurrent reindex
happening in parallel would be able to wait for any activity and see any
new rows inserted (or deleted).
An isolation test is added to check after the case fixed here, which is
a bit fancy by design as it relies on allow_system_table_mods to rename
the toast table and its index to fixed names. This way, it is possible
to reindex them directly without any dependency on the OID of the
underlying relation. Note that this could not use a DO block either, as
REINDEX CONCURRENTLY cannot be run in a transaction block. The test is
backpatched down to 13, where it is possible, thanks to c4a7a39, to use
allow_system_table_mods in a test suite.
Reported-by: Alexey Ermakov
Analyzed-by: Andres Freund, Noah Misch
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/17268-d2fb426e0895abd4@postgresql.org
Backpatch-through: 12
Certain settings from configuration or the Makefile infrastructure are
used by the TAP tests, but were not being set up by vcregress.pl. This
remedies those omissions. This should increase test coverage, especially
on the buildfarm.
Reviewed by Noah Misch
Discussion: https://postgr.es/m/17093da5-e40d-8335-d53a-2bd803fc38b0@dunslane.net
Backpatch to all live branches.
Further experimentation shows that commit 6051857fc is not sufficient
when using (some versions of?) OpenSSL. The reason is obscure, but
calling shutdown(socket, SD_SEND) improves matters.
Per testing by Andrew Dunstan and Alexander Lakhin.
Back-patch as before.
Discussion: https://postgr.es/m/af5e0bf3-6a61-bb97-6cba-061ddf22ff6b@dunslane.net
It turns out that this is necessary to keep Winsock from dropping any
not-yet-sent data, such as an error message explaining the reason for
process termination. It's pretty weird that the implicit close done
by the kernel acts differently from an explicit close, but it's hard
to argue with experimental results.
Independently submitted by Alexander Lakhin and Lars Kanis (comments
by me, though). Back-patch to all supported branches.
Discussion: https://postgr.es/m/90b34057-4176-7bb0-0dbb-9822a5f6425b@greiz-reinsdorf.de
Discussion: https://postgr.es/m/16678-253e48d34dc0c376@postgresql.org
The existing pg_upgrade/test.sh and the buildfarm code have been holding
the same set of SQL queries when doing cross-version upgrade tests to
adapt the objects created by the regression tests before the upgrade
(mostly, incompatible or non-existing objects need to be dropped from
the origin, perhaps re-created).
This moves all those SQL queries into a new, separate, file with a set
of \if clauses to handle the version checks depending on the old version
of the cluster to-be-upgraded.
The long-term plan is to make the buildfarm code re-use this new SQL
file, so as committers are able to fix any compatibility issues in the
tests of pg_upgrade with a refresh of the core code, without having to
poke at the buildfarm client. Note that this is only able to handle the
main regression test suite, and that nothing is done yet for contrib
modules yet (these have more issues like their database names).
A backpatch down to 10 is done, adapting the version checks as this
script needs to be only backward-compatible, so as it becomes possible
to clean up a maximum amount of code within the buildfarm client.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 10
The various ALTER OWNER routines tend to leak memory in
CurrentMemoryContext. That's not a problem when they're only called
once per command; but in this usage where we might be touching many
objects, it can amount to a serious memory leak. Fix that by running
each call in a short-lived context.
(DROP OWNED BY likely has a similar issue, except that you'll probably
run out of lock table space before noticing. REASSIGN is worth fixing
since for most non-table object types, it won't take any lock.)
Back-patch to all supported branches. Unfortunately, in the back
branches this helps to only a limited extent, since the sinval message
queue bloats quite a lot in this usage before commit 3aafc030a,
consuming memory more or less comparable to what's actually leaked.
Still, it's clearly a leak with a simple fix, so we might as well fix it.
Justin Pryzby, per report from Guillaume Lelarge
Discussion: https://postgr.es/m/CAECtzeW2DAoioEGBRjR=CzHP6TdL=yosGku8qZxfX9hhtrBB0Q@mail.gmail.com
Surround the contents with a test that the feature is enabled by
configure, to silence header checking tools on systems without GSSAPI
installed.
Backpatch to 12, where the file appeared.
Discussion: https://postgr.es/m/202111161709.u3pbx5lxdimt@alvherre.pgsql
In commit ff9f111bce I mixed up inconsistent definitions of the LSN of
the first record in a page, when the previous record ends exactly at the
page boundary. The correct LSN is adjusted to skip the WAL page header;
I failed to use that when setting XLogReaderState->overwrittenRecPtr,
so at WAL replay time VerifyOverwriteContrecord would refuse to let
replay continue past that record.
Backpatch to 10. 9.6 also contains this bug, but it's no longer being
maintained.
Discussion: https://postgr.es/m/45597.1637694259@sss.pgh.pa.us
Inluding <compile.h> and <eval.h> has not been necessary since Python
2.4, since they are included via <Python.h>. Morever, <eval.h> is
being removed in Python 3.11. So remove these includes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/84884.1637723223%40sss.pgh.pa.us
Replica identities that depend directly on an index rely on a set of
properties, one of them being that all the columns defined in this index
have to be marked as NOT NULL. There was a hole in the logic with ALTER
TABLE DROP NOT NULL, where it was possible to remove the NOT NULL
property of a column part of an index used as replica identity, so block
it to avoid problems with logical decoding down the road.
The same check was already done columns part of a primary key, so the
fix is straight-forward.
Author: Haiying Tang, Hou Zhijie
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB6113338C102BEE8B2FFC5BD9FB619@OS0PR01MB6113.jpnprd01.prod.outlook.com
Backpatch-through: 10
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
When a stored expression depends on a user-defined cast, the backend
records the dependency as being on the cast's implementation function
--- or indeed, if there's no cast function involved but just
RelabelType or CoerceViaIO, no dependency is recorded at all. This
is problematic for pg_dump, which is at risk of dumping things in the
wrong order leading to restore failures. Given the lack of previous
reports, the risk isn't that high, but it can be demonstrated if the
cast is used in some view whose rowtype is then used as an input or
result type for some other function. (That results in the view
getting hoisted into the functions portion of the dump, ahead of
the cast.)
A logically bulletproof fix for this would require including the
cast's OID in the parsed form of the expression, whence it could be
extracted by dependency.c, and then the stored dependency would force
pg_dump to do the right thing. Such a change would be fairly invasive,
and certainly not back-patchable. Moreover, since we'd prefer that
an expression using cast syntax be equal() to one doing the same
thing by explicit function call, the cast OID field would have to
have special ignored-by-comparisons semantics, making things messy.
So, let's instead fix this by a very simple hack in pg_dump: change
the object-type priority order so that casts are initially sorted
before functions, immediately after types. This fixes the problem
in a fairly direct way for casts that have no implementation function.
For those that do, the implementation function will be hoisted to just
before the cast by the dependency sorting step, so that we still have
a valid dump order. (I'm not sure that this provides a full guarantee
of no problems; but since it's been like this for many years without
any previous reports, this is probably enough to fix it in practice.)
Per report from Дмитрий Иванов.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPL5KHoGa3uvyKp6z6m48LwCnTsK+LRQ_mcA4uKGfqAVSEjV_A@mail.gmail.com
If a table contains a generated column that's preceded by a dropped
column, dumpTableData_insert failed to account for the dropped
column, and would emit DEFAULT placeholder(s) in the wrong column(s).
This resulted in failures at restore time. The default COPY code path
did not have this bug, likely explaining why it wasn't noticed sooner.
While we're fixing this, we can be a little smarter about the
situation: (1) avoid unnecessarily fetching the values of generated
columns, (2) omit generated columns from the output, too, if we're
using --column-inserts. While these modes aren't expected to be
as high-performance as the COPY path, we might as well be as
efficient as we can; it doesn't add much complexity.
Per report from Дмитрий Иванов.
Back-patch to v12 where generated columns came in.
Discussion: https://postgr.es/m/CAPL5KHrkBniyQt5e1rafm5DdXvbgiiqfEQEJ9GjtVzN71Jj5pA@mail.gmail.com
Previously it was impossible to terminate these programs via control-C
while they were prompting for a password. We can fix that trivially
for their initial password prompts, by moving setup of the SIGINT
handler from just before to just after their initial GetConnection()
calls.
This fix doesn't permit escaping out of later re-prompts, but those
should be exceedingly rare, since the user's password or the server's
authentication setup would have to have changed meanwhile. We
considered applying a fix similar to commit 46d665bc2, but that
seemed more complicated than it'd be worth. Moreover, this way is
back-patchable, which that wasn't.
The misbehavior exists in all supported versions, so back-patch to all.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
This commit adds to the main regression test suite a table with all
the in-core data types (some exceptions apply). This table is not
dropped, so as pg_upgrade would be able to check the binary
compatibility of the types tracked in the table. If a new type is added
in core, this part of the tests would need a refresh but the tests are
designed to fail if that were to happen.
As this is useful for upgrades and that these rely on the objects
created in the regression test suite of the old version upgraded from,
a backpatch down to 12 is done, which is the last point where a binary
incompatible change has been done (7c15cef). This will hopefully be
enough to find out if something gets broken during the development of a
new version of Postgres, so as it is possible to take actions in
pg_upgrade itself in this case (like 0ccfc28 for sql_identifier).
An area that is not covered yet is related to external modules, which
may create their own types. The testing infrastructure of pg_upgrade is
not integrated yet with the external modules stored in core
(src/test/modules/ or contrib/, all use the same database name for their
tests so there would be an overlap). This could be improved in the
future.
Author: Justin Pryzby
Reviewed-by: Jacob Champion, Peter Eisentraut, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
pg_stat_get_slru() in pgstatfuncs.c would point to one element after the
end of the array PgStat_SLRUStats when finishing to scan its entries.
This had no direct consequences as no data from the extra memory area
was read, but static analyzers would rightfully complain here. So let's
be clean.
While on it, this adds one regression test in the area reserved for
system views.
Reported-by: Alexander Kozhemyakin, via AddressSanitizer
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17280-37da556e86032070@postgresql.org
Backpatch-through: 13
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
When a role being dropped contains is referenced by catalog objects that
are concurrently also being dropped, a crash can result while trying to
construct the string that describes the objects. Suppress that by
ignoring objects whose descriptions are returned as NULL.
The majority of relevant codesites were already cautious about this
already; we had just missed a couple.
This is an old bug, so backpatch all the way back.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17126-21887f04508cb5c8@postgresql.org
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
This undoes a mistake in 1ec7679f1: domainval and domainnull were
meant to live across loop iterations, but they were incorrectly
moved inside the loop. The effect was only to emit useless extra
EEOP_MAKE_READONLY steps, so it's not a big deal; nonetheless,
back-patch to v13 where the mistake was introduced.
Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqXuhbkaAp-sGH6dR6Nsq7v28_0TPexHOm6FiDYqwQD-w@mail.gmail.com
As in commits 6301c3ada and e9d9ba2a4, avoid doing repetitive
list_delete_first() operations, since that would be expensive when
there are many files waiting to be unlinked. This is a slightly
larger change than in those cases. We have to keep the list state
valid for calls to AbsorbSyncRequests(), so it's necessary to invent a
"canceled" field instead of immediately deleting PendingUnlinkEntry
entries. Also, because we might not be able to process all the
entries, we need a new list primitive list_delete_first_n().
list_delete_first_n() is almost list_copy_tail(), but it modifies the
input List instead of making a new copy. I found a couple of existing
uses of the latter that could profitably use the new function. (There
might be more, but the other callers look like they probably shouldn't
overwrite the input List.)
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Failing to do so results in inability of logical decoding to process the
WAL stream. Handle it by doing nothing.
Backpatch all the way back.
Reported-by: Petr Jelínek <petr.jelinek@enterprisedb.com>
The opclass parameter Datums from the old index are fetched in the same
way as for predicates and expressions, by grabbing them directly from
the system catalogs. They are then copied into the new IndexInfo that
will be used for the creation of the new copy.
This caused the new index to be rebuilt with default parameters rather
than the ones pre-defined by a user. The only way to get back a new
index with correct opclass parameters would be to recreate a new index
from scratch.
The issue has been introduced by 911e702.
Author: Michael Paquier
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/YX0CG/QpLXcPr8HJ@paquier.xyz
Backpatch-through: 13
When replaying a transaction that held many exclusive locks on the
primary, a standby server's startup process would expend O(N^2)
effort on manipulating the list of locks. This code was fine when
written, but commit 1cff1b95a made repetitive list_delete_first()
calls inefficient, as explained in its commit message. Fix by just
iterating the list normally, and releasing storage only when done.
(This'd be inadequate if we needed to recover from an error occurring
partway through; but we don't.)
Back-patch to v13 where 1cff1b95a came in.
Nathan Bossart
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
DST law changes in Fiji, Jordan, Palestine, and Samoa. Historical
corrections for Barbados, Cook Islands, Guyana, Niue, Portugal, and
Tonga.
Also, the Pacific/Enderbury zone has been renamed to Pacific/Kanton.
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Africa/Accra, America/Atikokan,
America/Blanc-Sablon, America/Creston, America/Curacao,
America/Nassau, America/Port_of_Spain, Antarctica/DumontDUrville,
and Antarctica/Syowa.
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
The code does not expect sh_error() to return, but the patch
that made this header usable in frontend didn't get that memo.
While here, plaster unlikely() on the tests that decide whether
to invoke sh_error(), and add our standard copyright notice.
Noted by Andres Freund. Back-patch to v13 where this frontend
support came in.
Discussion: https://postgr.es/m/0D54435C-1199-4361-9D74-2FBDCF8EA164@anarazel.de
Non-global default privilege entries should be dumped as-is,
not made relative to the default ACL for their object type.
This would typically only matter if one had revoked some
on-by-default privileges in a global entry, and then wanted
to grant them again in a non-global entry.
Per report from Boris Korzun. This is an old bug, so back-patch
to all supported branches.
Neil Chen, test case by Masahiko Sawada
Discussion: https://postgr.es/m/111621616618184@mail.yandex.ru
Discussion: https://postgr.es/m/CAA3qoJnr2+1dVJObNtfec=qW4Z0nz=A9+r5bZKoTSy5RDjskMw@mail.gmail.com
The build scripts of Visual Studio would fail to detect properly a 3.0.0
build as the check on the second digit was failing. This is adjusted
where needed, allowing the builds to complete. Note that the MSIs of
OpenSSL mentioned in the documentation have not changed any library
names for Win32 and Win64, making this change straight-forward.
Reported-by: htalaco, via github
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/YW5XKYkq6k7OtrFq@paquier.xyz
Backpatch-through: 9.6
Commit 1b5d797cd4 intended to relax the lock level used to rename
indexes, but inadvertently allowed *any* relation to be renamed with a
lowered lock level, as long as the command is spelled ALTER INDEX.
That's undesirable for other relation types, so retry the operation with
the higher lock if the relation turns out not to be an index.
After this fix, ALTER INDEX <sometable> RENAME will require access
exclusive lock, which it didn't before.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Onder Kalaci <onderk@microsoft.com>
Discussion: https://postgr.es/m/PH0PR21MB1328189E2821CDEC646F8178D8AE9@PH0PR21MB1328.namprd21.prod.outlook.com
ldapsearch's deprecated -h/-p arguments were removed, need to use -H now -
which has been around for over 20 years.
As perltidy insists on reflowing the parameters anyway, change order and
"phrasing" to yield a less confusing layout (per suggestion from Tom Lane).
Discussion: https://postgr.es/m/20211009233850.wvr6apcrw2ai6cnj@alap3.anarazel.de
Backpatch: 11-, where the tests were added.
An update such as "UPDATE ... SET fld[n].subfld = whatever"
failed if the array elements were domains rather than plain
composites. That's because isAssignmentIndirectionExpr()
failed to cope with the CoerceToDomain node that would appear
in the expression tree in this case. The result would typically
be a crash, and even if we accidentally didn't crash, we'd not
correctly preserve other fields of the same array element.
Per report from Onder Kalaci. Back-patch to v11 where arrays of
domains came in.
Discussion: https://postgr.es/m/PH0PR21MB132823A46AA36F0685B7A29AD8BD9@PH0PR21MB1328.namprd21.prod.outlook.com
I think when I added this assertion (in commit 8f889b108), I was only
thinking of the use of transformExpressionList at top level of INSERT
and VALUES. But it's also called by transformRowExpr(), which can
certainly occur in an UPDATE targetlist, so it's inappropriate to
suppose that p_multiassign_exprs must be empty. Besides, since the
input is not expected to contain ResTargets, there's no reason it
should contain MultiAssignRefs either. Hence this code need not
be concerned about the state of p_multiassign_exprs, and we should
just drop the assertion.
Per bug #17236 from ocean_li_996. It's been wrong for years,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17236-3210de9bcba1d7ca@postgresql.org
If the blob TOC file cannot be parsed, the error message was failing
to print the filename as the variable holding it was shadowed by the
destination buffer for parsing. When the filename fails to parse,
the error will print an empty string:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "": ..
..instead of the intended error message:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "dump/blobs.toc": ..
Fix by renaming both variables as the shared name was too generic to
store either and still convey what the variable held.
Backpatch all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/A2B151F5-B32B-4F2C-BA4A-6870856D9BDE@yesql.se
Backpatch-through: 9.6
Make sure that the string parsing is limited by the size of the
destination buffer.
In pg_basebackup the available values sent from the server
is limited to two characters so there was no risk of overflow.
In pg_dump the buffer is bounded by MAXPGPATH, and thus the limit
must be inserted via preprocessor expansion and the buffer increased
by one to account for the terminator. There is no risk of overflow
here, since in this case, the buffer scanned is smaller than the
destination buffer.
Backpatch the pg_basebackup fix to 11 where it was introduced, and
the pg_dump fix all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/B14D3D7B-F98C-4E20-9459-C122C67647FB@yesql.se
Backpatch-through: 11 and 9.6
The grammar of this command run on indexes with column names has always
been authorized by the parser, and it has never been documented.
Since 911e702, it is possible to define opclass parameters as of CREATE
INDEX, which actually broke the old case of ALTER INDEX/TABLE where
relation-level parameters n_distinct and n_distinct_inherited could be
defined for an index (see 76a47c0 and its thread where this point has
been touched, still remained unused). Attempting to do that in v13~
would cause the index to become unusable, as there is a new dedicated
code path to load opclass parameters instead of the relation-level ones
previously available. Note that it is possible to fix things with a
manual catalog update to bring the relation back online.
This commit disables this command for now as the use of column names for
indexes does not make sense anyway, particularly when it comes to index
expressions where names are automatically computed. One way to properly
support this case properly in the future would be to use column numbers
when it comes to indexes, in the same way as ALTER INDEX .. ALTER COLUMN
.. SET STATISTICS.
Partitioned indexes were already blocked, but not indexes. Some tests
are added for both cases.
There was some code in ANALYZE to enforce n_distinct to be used for an
index expression if the parameter was defined, but just remove it for
now until/if there is support for this (note that index-level parameters
never had support in pg_dump either, previously), so this was just dead
code.
Reported-by: Matthijs van der Vleuten
Author: Nathan Bossart, Michael Paquier
Reviewed-by: Vik Fearing, Dilip Kumar
Discussion: https://postgr.es/m/17220-15d684c6c2171a83@postgresql.org
Backpatch-through: 13
Failing to do that, any direct inserts/updates of those partitions
would fail to enforce the correct constraint, that is, one that
considers the new partition constraint of their parent table.
Backpatch to 10.
Reported by: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB5718DA1C4609A25186D1FBF194089%40OS3PR01MB5718.jpnprd01.prod.outlook.com
During a replication slot creation, an ERROR generated in the same
transaction as the one creating a to-be-exported snapshot would have
left the backend in an inconsistent state, as the associated static
export snapshot state was not being reset on transaction abort, but only
on the follow-up command received by the WAL sender that created this
snapshot on replication slot creation. This would trigger inconsistency
failures if this session tried to export again a snapshot, like during
the creation of a replication slot.
Note that a snapshot export cannot happen in a transaction block, so
there is no need to worry resetting this state for subtransaction
aborts. Also, this inconsistent state would very unlikely show up to
users. For example, one case where this could happen is an
out-of-memory error when building the initial snapshot to-be-exported.
Dilip found this problem while poking at a different patch, that caused
an error in this code path for reasons unrelated to HEAD.
Author: Dilip Kumar
Reviewed-by: Michael Paquier, Zhihong Yu
Discussion: https://postgr.es/m/CAFiTN-s0zA1Kj0ozGHwkYkHwa5U0zUE94RSc_g81WrpcETB5=w@mail.gmail.com
Backpatch-through: 9.6
It was clearly the intent to do so all along, but the original coding
fat-fingered this by checking the wrong array element. We fixed it
in passing in 403a3d91c, but that later got reverted, and we forgot
to keep this bug fix.
Most of the time this'd be relatively harmless, since once we lock
any of the partitioned table's leaf partitions, that would suffice
to prevent major DDL on the partitioned table itself. However, a
childless partitioned table would get dumped with no relevant lock
whatsoever, possibly allowing dump failure or inconsistent output.
Unlike 403a3d91c, there are no versioning concerns, since every server
version that has partitioned tables will allow you to lock one.
Back-patch to v10 where partitioned tables were introduced.
Discussion: https://postgr.es/m/1018205.1634346327@sss.pgh.pa.us
An extension may want to call GetSecurityLabel() on a shared object
before the shared relcaches are fully initialized. For instance, a
ClientAuthentication_hook might want to retrieve the security label on
a role.
Discussion: https://postgr.es/m/ecb7af0b26e3be1d96d291c8453a86f1f82d9061.camel@j-davis.com
Backpatch-through: 9.6
If a function-in-FROM laterally references the output of some sub-SELECT
earlier in the FROM clause, and we are able to flatten that sub-SELECT
into the outer query, the expression(s) copied into the function RTE
missed being processed by eval_const_expressions. This'd lead to trouble
and probable crashes at execution if such expressions contained
named-argument function call syntax or functions with defaulted arguments.
The bug is masked if the query contains any explicit JOIN syntax, which
may help explain why we'd not noticed.
Per bug #17227 from Bernd Dorn. This is an oversight in commit 7266d0997,
so back-patch to v13 where that came in.
Discussion: https://postgr.es/m/17227-5a28ed1512189fa4@postgresql.org
The test code added with ff9f111bce fails under valgrind, and probably
other slow cases too, because if (say) autovacuum runs in between and
produces WAL of its own, the large INSERT fails to account for that in
the LSN calculations. Rewrite to use a DO loop.
Per complaint from Andres Freund
Backpatch to all branches.
Discussion: https://postgr.es/m/20211013180338.5guyqzpkcisqugrl@alap3.anarazel.de
This fixes a set of issues that cause different breakages or annoyances
when using pg_upgrade's test.sh to do upgrades across different major
versions:
- test.sh is completely broken when using v14 as new version because of
the removal of testtablespace/ as Makefile rule. Older versions of
pg_regress don't support --make-tablespacedir, blocking the creation of
the tablespace. In order to fix that, it is simple enough to create
those directories in the script itself, but only do that when an old
version is involved. This fix is needed on HEAD and REL_14_STABLE.
- The script would fail when using PG <= v11 as old version because of
WITH OIDS relations not supported in v12. In order to fix this, this
steals a method from the buildfarm that uses a DO block to change all
the relations marked as WITH OIDS, allowing pg_upgrade to pass. This is
more portable than using ALTER TABLE queries on the relations causing
issues. This is fixed down to v12, and authored originally by Andrew
Dunstan.
- Not using --extra-float-digits=0 with v11 as old version causes
a lot of diffs in the dumps, making the whole unreadable. This gets
only done when using v11 as old version. This is fixed down to v12.
The buildfarm code uses that already.
Note that the addition of --wal-segsize and --allow-group-access breaks
the script when using v10 or older at initdb time as these got added in
11. 10 would be EOL'd next year and nobody has complained about those
problems yet, so nothing is done about that. This means that this
commit fixes upgrade tests using test.sh with v11 as minimum older
version, up to HEAD, and that it is enough to apply this change down to
12. The old and new dumps still generate diffs, still require manual
checks, and more could be done to reduce the noise, but this allows the
tests to run with a rather minimal amount of them.
I have tested this commit and test.sh with v11 as minimum across all the
branches where this is applied. Note that this commit has no impact on
the normal pg_upgrade test run with a simple "make check".
Author: Justin Pryzby, Andrew Dunstan, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
This fixes a loss of precision that occurs when the first input is
very close to 1, so that its logarithm is very small.
Formerly, during the initial low-precision calculation to estimate the
result weight, the logarithm was computed to a local rscale that was
capped to NUMERIC_MAX_DISPLAY_SCALE (1000). However, the base may be
as close as 1e-16383 to 1, hence its logarithm may be as small as
1e-16383, and so the local rscale needs to be allowed to exceed 16383,
otherwise all precision is lost, leading to a poor choice of rscale
for the full-precision calculation.
Fix this by removing the cap on the local rscale during the initial
low-precision calculation, as we already do in the full-precision
calculation. This doesn't change the fact that the initial calculation
is a low-precision approximation, computing the logarithm to around 8
significant digits, which is very fast, especially when the base is
very close to 1.
Patch by me, reviewed by Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCV-Ceu%2BHpRMf416yUe4KKFv%3DtdgXQAe5-7S9tD%3D5E-T1g%40mail.gmail.com
3c5b0685b9 used setFilePointer() to set the position of the filehandle, but
passed the wrong filehandle, always leaving the position at 0. Instead of just
fixing that, remove use of setFilePointer(), we have a perl fd at this point,
so we can just use perl's seek().
Additionally, the perl filehandle wasn't closed, just the windows filehandle.
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211003173038.64mmhgxctfqn7wl6@alap3.anarazel.de
Backpatch: 9.6-, like 3c5b0685b9
Per discussion, let's just follow CLDR's default zone mappings
faithfully. There are two changes here that are clear improvements:
* Mapping "Greenwich Standard Time" to Atlantic/Reykjavik is actually
a better fit than using London, because Iceland hasn't observed DST
since 1968, so this is more nearly what people might expect.
* Since the "Samoa" zone is specified to be UTC+13:00, we must map
it to Pacific/Apia not Pacific/Samoa; the latter refers to American
Samoa which is now on the other side of the date line.
The rest of these changes look like they're choosing the most populous
IANA zone as representative. Whatever the details, we're just going
to say "if you don't like this mapping, complain to CLDR".
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
Some specific logic is done at the end of recovery when involving 2PC
transactions:
1) Call RecoverPreparedTransactions(), to recover the state of 2PC
transactions into memory (re-acquire locks, etc.).
2) ShutdownRecoveryTransactionEnvironment(), to move back to normal
operations, mainly cleaning up recovery locks and KnownAssignedXids
(including any 2PC transaction tracked previously).
3) Switch XLogCtl->SharedRecoveryState to RECOVERY_STATE_DONE, which is
the tipping point for any process calling RecoveryInProgress() to check
if the cluster is still in recovery or not.
Any snapshot taken between steps 2) and 3) would be empty, causing any
transaction relying on a snapshot at this point to potentially corrupt
data as there could still be some 2PC transactions to track, with
RecentXmin moving backwards on successive calls to GetSnapshotData() in
the same transaction.
As SharedRecoveryState is the point to take into account to know if it
is safe to discard KnownAssignedXids, this commit moves step 2) after
step 3), so as we can never finish with empty snapshots.
This exists since the introduction of hot standby, so backpatch all the
way down. The window with incorrect snapshots is extremely small, but I
have seen it when running 023_pitr_prepared_xact.pl, as did buildfarm
member fairywren. Thomas Munro also found it independently. Special
thanks to Andres Freund for taking the time to analyze this issue.
Reported-by: Thomas Munro, Michael Paquier
Analyzed-by: Andres Freund
Discussion: https://postgr.es/m/20210422203603.fdnh3fu2mmfp2iov@alap3.anarazel.de
Backpatch-through: 9.6
This corrects a bunch of entries in win32_tzmap[], and adds a few
new ones, based on the CLDR project's windowsZones.xml file.
Non-cosmetic changes fall into four main categories:
* Flat-out errors:
US/Aleutan doesn't exist
America/Salvador doesn't exist
Asia/Baku is wrong for Yerevan
Asia/Dhaka (Bangladesh) is wrong for Astana (Kazakhstan)
Europe/Bucharest is wrong for Chisinau
America/Mexico_City is wrong for Chetumal
America/Buenos_Aires is wrong for Cayenne
America/Caracas has its own zone, so poor fit for La Paz
US/Eastern is wrong for Haiti
US/Eastern is wrong for Indiana (East)
Asia/Karachi is wrong for Tashkent
Etc/UTC+12 doesn't exist
Signs of Etc/GMT zones were backwards
* Judgment calls:
(These changes follow CLDR's choices, except for the first one)
Use Europe/London for "Greenwich Standard Time", since that seems much
more likely than Africa/Casablanca to be what people will think that
zone name means. CLDR has Atlantic/Reykjavik here, but that's no better.
Asia/Shanghai seems a better fit than Hong Kong for "China Standard
Time".
Europe/Sarajevo is now a link to Belgrade, ie "Central Europe Standard
Time"; so use Warsaw for "Central European Standard Time".
America/Sao_Paulo seems more representative than Araguaina for
"E. South America Standard Time".
Africa/Johannesburg seems more representative than Harare for
"South Africa Standard Time".
* New Windows zone names:
"Israel Standard Time"
"Kaliningrad Standard Time"
"Russia Time Zone N" for various N
"Singapore Standard Time"
"South Sudan Standard Time"
"W. Central Africa Standard Time"
"West Bank Standard Time"
"Yukon Standard Time"
Some of these replace older spellings, but I kept the older spellings
too in case our code runs on a machine with the older data.
* Replace aliases (tzdb Links) with underlying city-named zones:
(This tracks tzdb's longstanding practice, and reduces inconsistency
with the rest of the entries, as well as with CLDR.)
US/Alaska
Asia/Kuwait
Asia/Muscat
Canada/Atlantic
Australia/Canberra
Canada/Saskatchewan
US/Central
US/Eastern
US/Hawaii
US/Mountain
Canada/Newfoundland
US/Pacific
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The original intent seems to have been to sort case-insensitively
by the Windows zone name, but various changes over the years did
not get that memo. This commit just moves a few entries to
restore exact alphabetic order, to ease comparison to the outputs
of processing scripts.
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
get_variable_range() would incautiously believe that statistics
containing only an MCV list are sufficient to derive a range estimate.
That's okay for an enum-like column that contains only MCVs, but
otherwise the estimate could be pretty bad. Make it report that the
range is indeterminate unless the MCVs plus nullfrac account for
the whole table.
I don't think this needs a dedicated test case, since a quick code
coverage check verifies that the existing regression tests traverse
all the alternatives. There is room to doubt that a future-proof
test case could be built anyway, given that the submitted example
accidentally doesn't fail before v11.
Per bug #17207 from Simon Perepelitsa. Back-patch to v10.
In principle this has been broken all along, but I'm hesitant to
make such changes in 9.6, since if anyone is unhappy with 9.6.24's
behavior there will be no second chance to fix it.
Discussion: https://postgr.es/m/17207-5265aefa79e333b4@postgresql.org
Commit 84f5c2908 forgot to consider the possibility that
EnsurePortalSnapshotExists could run inside a subtransaction with
lifespan shorter than the Portal's. In that case, the new active
snapshot would be popped at the end of the subtransaction, leaving
a dangling pointer in the Portal, with mayhem ensuing.
To fix, make sure the ActiveSnapshot stack entry is marked with
the same subtransaction nesting level as the associated Portal.
It's certainly safe to do so since we won't be here at all unless
the stack is empty; hence we can't create an out-of-order stack.
Let's also apply this logic in the case where PortalRunUtility
sets portalSnapshot, just to be sure that path can't cause similar
problems. It's slightly less clear that that path can't create
an out-of-order stack, so add an assertion guarding it.
Report and patch by Bertrand Drouvot (with kibitzing by me).
Back-patch to v11, like the previous commit.
Discussion: https://postgr.es/m/ff82b8c5-77f4-3fe7-6028-fcf3303e82dd@amazon.com
Computing related timestamps by subtracting "N days" is sensitive
to the prevailing timezone, since we interpret that as "same local
time on the N'th prior day". Even though the intervals in question
are only two to four days, through remarkable bad luck they managed
to cross the end of Ramadan in 2014, causing the test's output to
change if timezone is set to Africa/Casablanca. (Maybe in other
Muslim areas as well; I didn't check.) There's absolutely no reason
for this test to exercise interval subtraction, so just get rid of
that and use plain timestamptz constants representing the intended
values.
Per report from Andres Freund. Back-patch to v10 where this test
script came in.
Discussion: https://postgr.es/m/20210930183641.7lh4jhvpipvromca@alap3.anarazel.de
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
Previously socket errors such as invalid socket or socket wait method failures
during benchmark caused pgbench to exit with status 0. Instead, errors during
the run should result in exit status 2.
Back-patch to v12 where pgbench started reporting exit status.
Original complaint and patch by Hayato Kuroda.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
The failure of socket wait method like "select()" doesn't terminate pgbench.
So the log level of error message when that failure happens should be ERROR.
But previously FATAL was used in that case.
Back-patch to v13 where pgbench started using common logging API.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210617005934.8bd37bf72efd5f1b38e6f482@sraoss.co.jp
That allows to include just visibilitymapdefs.h from file.c, and in turn,
remove include of postgres.h from relcache.h.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210913232614.czafiubr435l6egi%40alap3.anarazel.de
Author: Alexander Korotkov
Reviewed-by: Andres Freund, Tom Lane, Alvaro Herrera
Backpatch-through: 13
Calculating degree of a functional dependency may allocate a lot of
memory - we have released mot of the explicitly allocated memory, but
e.g. detoasted varlena values were left behind. That may be an issue,
because we consider a lot of dependencies (all combinations), and the
detoasting may happen for each one again.
Fixed by calling dependency_degree() in a dedicated context, and
resetting it after each call. We only need the calculated dependency
degree, so we don't need to copy anything.
Backpatch to PostgreSQL 10, where extended statistics were introduced.
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20210915200928.GP831%40telsasoft.com
Until now, all extended statistics on a given relation were built in the
same memory context, without resetting. Some of the memory was released
explicitly, but not all of it - for example memory allocated while
detoasting values is hard to free. This is how it worked since extended
statistics were introduced in PostgreSQL 10, but adding support for
extended stats on expressions made the issue somewhat worse as it
increases the number of statistics to build.
Fixed by adding a memory context which gets reset after building each
statistics object (all the statistics kinds included in it). Resetting
it after building each statistics kind would be even better, but it
would require more invasive changes and copying of results, making it
harder to backpatch.
Backpatch to PostgreSQL 10, where extended statistics were introduced.
Author: Justin Pryzby
Reported-by: Justin Pryzby
Reviewed-by: Tomas Vondra
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20210915200928.GP831%40telsasoft.com
Updates/Deletes on a partition were allowed even without replica identity
after the parent table was added to a publication. This would later lead
to an error on subscribers. The reason was that we were not invalidating
the partition's relcache and the publication information for partitions
was not getting rebuilt. Similarly, we were not invalidating the
partitions' relcache after dropping a partitioned table from a publication
which will prohibit Updates/Deletes on its partition without replica
identity even without any publication.
Reported-by: Haiying Tang
Author: Hou Zhijie and Vignesh C
Reviewed-by: Vignesh C and Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB6113D77F583C922F1CEAA1C3FBD29@OS0PR01MB6113.jpnprd01.prod.outlook.com
Contrary to the output of native perl, Msys perl generates outputs with
CRLFs characters. There are already places in the TAP code where CRLFs
(\r\n) are automatically converted to LF (\n) on Msys, but we missed a
couple of places when running commands and using their output for
comparison, that would lead to failures.
This problem has been found thanks to the test added in 5adb067 using
TestLib::command_checks_all(), but after a closer look more code paths
were missing a filter.
This is backpatched all the way down to prevent any surprises if a new
test is introduced in stable branches.
Reviewed-by: Andrew Dunstan, Álvaro Herrera
Discussion: https://postgr.es/m/1252480.1631829409@sss.pgh.pa.us
Backpatch-through: 9.6
Before commit 84f5c2908, a STABLE function in a plpgsql CALL
statement's argument list would see an up-to-date snapshot,
because exec_stmt_call would push a new snapshot. I got rid of
that because the possibility of the snapshot disappearing within
COMMIT made it too hard to manage a snapshot across the CALL
statement. That's fine so far as the procedure itself goes,
but I forgot to think about the possibility of STABLE functions
within the CALL argument list. As things now stand, those'll
be executed with the Portal's snapshot as ActiveSnapshot,
keeping them from seeing updates more recent than Portal startup.
(VOLATILE functions don't have a problem because they take their
own snapshots; which indeed is also why the procedure itself
doesn't have a problem. There are no STABLE procedures.)
We can fix this by pushing a new snapshot transiently within
ExecuteCallStmt itself. Popping the snapshot before we get
into the procedure proper eliminates the management problem.
The possibly-useless extra snapshot-grab is slightly annoying,
but it's no worse than what happened before 84f5c2908.
Per bug #17199 from Alexander Nawratil. Back-patch to v11,
like the previous patch.
Discussion: https://postgr.es/m/17199-1ab2561f0d94af92@postgresql.org
A broken HOT chain is not an unexpected condition, even when the offset
number points past the end of the page's line pointer array.
heap_prune_chain() does not (and never has) treated this condition as
unexpected, so derivative code in heap_index_delete_tuples() shouldn't
do so either.
Oversight in commit 4228817449.
The assertion can probably only fail on Postgres 14 and master. Earlier
releases don't have commit 3c3b8a4b, which taught VACUUM to truncate the
line pointer array of heap pages. Backpatch all the same, just to be
consistent.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17197-9438f31f46705182@postgresql.org
Backpatch: 12-, just like commit 4228817449.
Casting a value that's already of a type with a specific typmod
to an unspecified typmod doesn't do anything so far as run-time
behavior is concerned. However, it really ought to change the
exposed type of the expression to match. Up to now,
coerce_type_typmod hasn't bothered with that, which creates gotchas
in contexts such as recursive unions. If for example one side of
the union is numeric(18,3), but it needs to be plain numeric to
match the other side, there's no direct way to express that.
This is easy enough to fix, by inserting a RelabelType to update the
exposed type of the expression. However, it's a bit nervous-making
to change this behavior, because it's stood for a really long time.
But no complaints have emerged about 14beta3, so go ahead and
back-patch.
Back-patch of 5c056b0c2 into previous supported branches.
Discussion: https://postgr.es/m/CABNQVagu3bZGqiTjb31a8D5Od3fUMs7Oh3gmZMQZVHZ=uWWWfQ@mail.gmail.com
Discussion: https://postgr.es/m/1488389.1631984807@sss.pgh.pa.us
Commit 55dc86eca changed pull_varnos to use (if possible) the associated
ph_eval_at for a PlaceHolderVar. I missed a fine point though: we might
be looking at a PHV in the quals or tlist of a child appendrel, in which
case we need to compute a ph_eval_at value that's been translated in the
same way that the PHV itself has been (cf. adjust_appendrel_attrs).
Fortunately, enough info is available in the PlaceHolderInfo to make
such translation possible without additional outside data, so we don't
need another round of uglification of planner APIs. This is a little
bit complicated, but since it's a hard-to-hit corner case, I'm not much
worried about adding cycles here.
Per report from Jaime Casanova. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20210915230959.GB17635@ahch-to
ProcArrayGroupClearXid function has a parameter named "proc",
but the same name was used for its local variables. This commit fixes
this variable shadowing, to improve code readability.
Back-patch to all supported versions, to make future back-patching
easy though this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
It's possible to execute user-defined SQL in some background processes;
for example, logical replication workers can fire triggers. This opens
the possibility that someone would try to execute LISTEN in such a
context. But since only regular backends ever call
ProcessNotifyInterrupt, no messages would actually be received, and
thus the registered listener would simply prevent the message queue
from being cleaned. Eventually NOTIFY would stop working, which is bad.
Perhaps someday somebody will invent infrastructure to make listening
in a background worker actually useful. In the meantime, forbid it.
Back-patch to v13, which is where we introduced the MyBackendType
variable. It'd be a lot harder to implement the check without that,
and it doesn't seem worth the trouble.
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
If an allocation failed within LLVM it is not safe to call back into LLVM as
LLVM is not generally safe against exceptions / stack-unwinding. Thus errors
while in LLVM code are promoted to FATAL. However llvm_shutdown() did call
back into LLVM even in such cases, while llvm_release_context() was careful
not to do so.
We cannot generally skip shutting down LLVM, as that can break profiling. But
it's OK to do so if there was an error from within LLVM.
Reported-By: Jelte Fennema <Jelte.Fennema@microsoft.com>
Author: Andres Freund <andres@anarazel.de>
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/AM5PR83MB0178C52CCA0A8DEA0207DC14F7FF9@AM5PR83MB0178.EURPRD83.prod.outlook.com
Backpatch: 11-, where jit was introduced
Ordinarily, using EXIT this way would draw "control reached end of
function without RETURN". However, if the function is one where we
don't require an explicit RETURN (such as a DO block), that should
not happen. It did anyway, because add_dummy_return() neglected to
account for the case.
Per report from Herwig Goemans. Back-patch to all supported branches.
Discussion: https://postgr.es/m/868ae948-e3ca-c7ec-95a6-83cfc08ef750@gmail.com
While processing toast changes in logical decoding, we rejigger the
tuple change to point to in-memory toast tuples instead to on-disk toast
tuples. And, to make sure the memory accounting is correct, we were
subtracting the old change size and then after re-computing the new tuple,
re-adding its size at the end. Now, if there is any error before we add
the new size, we will release the changes and that will update the
accounting info (subtracting the size from the counters). And we were
underflowing there which leads to an assertion failure in assert enabled
builds and wrong memory accounting in reorder buffer otherwise.
Author: Bertrand Drouvot
Reviewed-by: Amit Kapila
Backpatch-through: 13, where memory accounting was introduced
Discussion: https://postgr.es/m/92b0ee65-b8bd-e42d-c082-4f3f4bf12d34@amazon.com
An out-of-memory failure happening when allocating the structures to
store the connection parameter keywords and values would mess up with
the set of connections saved, as on failure the pthread mutex would
still be hold with the new connection object listed but free()'d.
Rather than just unlocking the mutex, which would leave the static list
of connections into an inconsistent state, move the allocation for the
structures of the connection parameters before beginning the test
manipulation. This ensures that the list of connections and the
connection mutex remain consistent all the time in this code path.
This error is unlikely going to happen, but this could mess up badly
with ECPG clients in surprising ways, so backpatch all the way down.
Reported-by: ryancaicse
Discussion: https://postgr.es/m/17186-b4cfd8f0eb4d1dee@postgresql.org
Backpatch-through: 9.6
If search_start is greater than the length of the string, we should just
return REG_NOMATCH immediately. (Note that the equality case should
*not* be rejected, since the pattern might be able to match zero
characters.) This guards various internal assumptions that the min of a
range of string positions is not more than the max. Violation of those
assumptions could allow an attempt to fetch string[search_start-1],
possibly causing a crash.
Jaime Casanova pointed out that this situation is reachable with the
new regexp_xxx functions that accept a user-specified start position.
I don't believe it's reachable via any in-core call site in v14 and
below. However, extensions could possibly call pg_regexec with an
out-of-range search_start, so let's back-patch the fix anyway.
Discussion: https://postgr.es/m/20210911180357.GA6870@ahch-to
We have long forbidden fetching backwards from a NO SCROLL cursor,
but the prohibition didn't extend to cases in which we rewind the
query altogether and then re-fetch forwards. I think the reason is
that this logic was mainly meant to protect plan nodes that can't
be run in the reverse direction. However, re-reading the query output
is problematic if the query is volatile (which includes SELECT FOR
UPDATE, not just queries with volatile functions): the re-read can
produce different results, which confuses the cursor navigation logic
completely. Another reason for disliking this approach is that some
code paths will either fetch backwards or rewind-and-fetch-forwards
depending on the distance to the target row; so that seemingly
identical use-cases may or may not draw the "cursor can only scan
forward" error. Hence, let's clean things up by disallowing rewind
as well as fetch-backwards in a NO SCROLL cursor.
Ordinarily we'd only make such a definitional change in HEAD, but
there is a third reason to consider this change now. Commit ba2c6d6ce
created some new user-visible anomalies for non-scrollable cursors
WITH HOLD, in that navigation in the cursor result got confused if the
cursor had been partially read before committing. The only good way
to resolve those anomalies is to forbid rewinding such a cursor, which
allows removal of the incorrect cursor state manipulations that
ba2c6d6ce added to PersistHoldablePortal.
To minimize the behavioral change in the back branches (including
v14), refuse to rewind a NO SCROLL cursor only when it has a holdStore,
ie has been held over from a previous transaction due to WITH HOLD.
This should avoid breaking most applications that have been sloppy
about whether to declare cursors as scrollable. We'll enforce the
prohibition across-the-board beginning in v15.
Back-patch to v11, as ba2c6d6ce was.
Discussion: https://postgr.es/m/3712911.1631207435@sss.pgh.pa.us
Some plan node types don't react well to being called again after
they've already returned NULL. PortalRunSelect() has long dealt
with this by calling the executor with NoMovementScanDirection
if it sees that we've already run the portal to the end. However,
commit ba2c6d6ce overlooked this point, so that persisting an
already-fully-fetched cursor would fail if it had such a plan.
Per report from Tomas Barton. Back-patch to v11, as the faulty
commit was. (I've omitted a test case because the type of plan
that causes a problem isn't all that stable.)
Discussion: https://postgr.es/m/CAPV2KRjd=ErgVGbvO2Ty20tKTEZZr6cYsYLxgN_W3eAo9pf5sw@mail.gmail.com
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
Previously, walreceiver always closed the currently-opened WAL segment
and created its archive notification file, after it finished writing
the current segment up and received any WAL data that should be
written into the next segment. If walreceiver exited just before
any WAL data in the next segment arrived at standby, it did not
create the archive notification file of the current segment
even though that's known completed. This behavior could cause
WAL archiving of the segment to be delayed until subsequent
restartpoints or checkpoints created its notification file.
To fix the issue, this commit changes walreceiver so that it creates
an archive notification file of a current WAL segment immediately
if that's known completed before receiving next WAL data.
Back-patch to all supported branches.
Reported-by: Kyotaro Horiguchi
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200630.165503.1465894182551545886.horikyota.ntt@gmail.com
Coverity complained that one caller of getFormattedTypeName() failed
to free the returned string. Which is true, but rather than fixing
that one, let's get rid of this tedious and error-prone requirement.
Now that getFormattedTypeName() caches its result, strdup'ing that
result and expecting the caller to free it accomplishes little except
to waste cycles. We do create a leak in the case where getTypes didn't
make a TypeInfo for the type, but that basically shouldn't ever happen.
Back-patch, as commit 6c450a861 was. This isn't a particularly
interesting bug fix, but the API change seems like a hazard for
future back-patching activity if we don't back-patch it.
If we copy data-modifying CTEs from the original query to a replacement
query (from a DO INSTEAD rule), we must set hasModifyingCTE properly
in the replacement query. Failure to do this can cause various
unpleasantness, such as unsafe usage of parallel plans. The code also
neglected to propagate hasRecursive, though that's only cosmetic at
the moment.
A difficulty arises if the rule action is an INSERT...SELECT. We
attach the original query's RTEs and CTEs to the sub-SELECT Query, but
data-modifying CTEs are only allowed to appear in the topmost Query.
For the moment, throw an error in such cases. It would probably be
possible to avoid this error by attaching the CTEs to the top INSERT
Query instead; but that would require a bunch of new code to adjust
ctelevelsup references. Given the narrowness of the use-case, and
the need to back-patch this fix, it does not seem worth the trouble
for now. We can revisit this if we get field complaints.
Per report from Greg Nancarrow. Back-patch to all supported branches.
(The test case added here does not fail before v10, but there are
plenty of places checking top-level hasModifyingCTE in 9.6, so I have
no doubt that this code change is necessary there too.)
Greg Nancarrow and Tom Lane
Discussion: https://postgr.es/m/CAJcOf-f68DT=26YAMz_i0+Au3TcLO5oiHY5=fL6Sfuits6r+_w@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
Updates/Deletes on a relation were allowed even without replica identity
after we define the publication for all tables. This would later lead to
an error on subscribers. The reason was that for such publications we were
not invalidating the relcache and the publication information for
relations was not getting rebuilt. Similarly, we were not invalidating the
relcache after dropping of such publications which will prohibit
Updates/Deletes without replica identity even without any publication.
Author: Vignesh C and Hou Zhijie
Reviewed-by: Hou Zhijie, Kyotaro Horiguchi, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/CALDaNm0pF6zeWqCA8TCe2sDuwFAy8fCqba=nHampCKag-qLixg@mail.gmail.com
We make each AIX shared library export all globals found in .o files
that originate in the library. That doesn't include symbols acquired by
-lpgcommon_shlib. That is good on average, but it became a problem for
libpq when commit e6afa8918c moved five
official libpq API symbols into src/common. Fix this by implementing
the SHLIB_EXPORTS mechanism for AIX, so affected libraries export the
same symbols that they export on Linux. This reintroduces symbols
pg_encoding_to_char, pg_utf_mblen, pg_char_to_encoding,
pg_valid_server_encoding, and pg_valid_server_encoding_id. Back-patch
to v13, where the aforementioned commit first appeared. While a minor
release is usually the wrong time to add or remove symbol exports in
libpq or libecpg, we should expect users to want each documented symbol.
Tony Reix
Discussion: https://postgr.es/m/PR3PR02MB6396742E2FC3E77D37A920BC86C79@PR3PR02MB6396.eurprd02.prod.outlook.com
timetz_zone() delivered completely wrong answers if the zone was
specified by a dynamic TZ abbreviation, because it failed to account
for the difference between the POSIX conventions for field values in
struct pg_tm and the conventions used in PG-specific datetime code.
As a stopgap fix, just adjust the tm_year and tm_mon fields to match
PG conventions. This is fixed in a different way in HEAD (388e71af8)
but I don't want to back-patch the change of reference point.
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
Attempting to make hashfloat4() look as much as possible like
hashfloat8(), I'd figured I could replace NaNs with get_float4_nan()
before widening to float8. However, results from protosciurus
and topminnow show that on some platforms that produces a different
bit-pattern from get_float8_nan(), breaking the intent of ce773f230.
Rearrange so that we use the result of get_float8_nan() for all NaN
cases. As before, back-patch.
Replace fixed-length command buffers with psprintf() calls. We didn't
have anything as convenient as psprintf() when this code was written,
but now that we do, there's little reason for the limitation to
stand. Removing it eliminates some corner cases where (for example)
starting the postmaster with a whole lot of options fails.
Most individual file names that pg_ctl deals with are still restricted
to MAXPGPATH, but we've seldom had complaints about that limitation
so long as it only applies to one filename.
Back-patch to all supported branches.
Phil Krylov
Discussion: https://postgr.es/m/567e199c6b97ee19deee600311515b86@krylov.eu
Previously this was allowed, but the collation effectively vanished
into the ether because of the way lookup_collation() works: you could
not use the collation, nor even drop it. Seems better to give an
error up front than to leave the user wondering why it doesn't work.
(Because this test is in DefineCollation not CreateCollation, it does
not prevent pg_import_system_collations from creating ICU collations,
regardless of the initially-chosen encoding.)
Per bug #17170 from Andrew Bille. Back-patch to v10 where ICU support
was added.
Discussion: https://postgr.es/m/17170-95845cf3f0a9c36d@postgresql.org
Modern POSIX seems to require strtod() to accept "-NaN", but there's
nothing about NaN in SUSv2, and some of our oldest buildfarm members
don't like it. Let's try writing it as -'NaN' instead; that seems
to produce the same result, at least on Intel hardware.
Per buildfarm.
The IEEE 754 standard allows a wide variety of bit patterns for NaNs,
of which at least two ("NaN" and "-NaN") are pretty easy to produce
from SQL on most machines. This is problematic because our btree
comparison functions deem all NaNs to be equal, but our float hash
functions know nothing about NaNs and will happily produce varying
hash codes for them. That causes unexpected results from queries
that hash a column containing different NaN values. It could also
produce unexpected lookup failures when using a hash index on a
float column, i.e. "WHERE x = 'NaN'" will not find all the rows
it should.
To fix, special-case NaN in the float hash functions, not too much
unlike the existing special case that forces zero and minus zero
to hash the same. I arranged for the most vanilla sort of NaN
(that coming from the C99 NAN constant) to still have the same
hash code as before, to reduce the risk to existing hash indexes.
I dithered about whether to back-patch this into stable branches,
but ultimately decided to do so. It's a clear improvement for
queries that hash internally. If there is anybody who has -NaN
in a hash index, they'd be well advised to re-index after applying
this patch ... but the misbehavior if they don't will not be much
worse than the misbehavior they had before.
Per bug #17172 from Ma Liangzhu.
Discussion: https://postgr.es/m/17172-7505bea9e04e230f@postgresql.org
The check to test whether the subscription workers were restarting after a
change in the subscription was failing. The reason was that the test was
assuming the walsender started before it reaches the 'streaming' state and
the walsender was exiting due to an error before that. Now, the walsender
was erroring out before reaching the 'streaming' state because it tries to
acquire the slot before the previous walsender has exited.
In passing, improve the die messages so that it is easier to investigate
the failures in the future if any.
Reported-by: Michael Paquier, as per buildfarm
Author: Ajin Cherian
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 10, where this test was introduced
Discussion: https://postgr.es/m/YRnhFxa9bo73wfpV@paquier.xyz
For no particularly good reason, getPolicies() queried pg_policy
separately for each table. We can collect all the policies in
a single query instead, and attach them to the correct TableInfo
objects using findTableByOid() lookups. On the regression
database, this reduces the number of queries substantially, and
provides a visible savings even when running against a local
server.
Per complaint from Hubert Depesz Lubaczewski. Since this is such
a simple fix and can have a visible performance benefit, back-patch
to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
There's long been a "TODO: there might be some value in caching
the results" annotation on pg_dump's getFormattedTypeName function;
but we hadn't gotten around to checking what it was costing us to
repetitively look up type names. It turns out that when dumping the
current regression database, about 10% of the total number of queries
issued are duplicative format_type() queries. However, Hubert Depesz
Lubaczewski reported a not-unusual case where these account for over
half of the queries issued by pg_dump. Individually these queries
aren't expensive, but when network lag is a factor, they add up to a
problem. We can very easily add some caching to getFormattedTypeName
to solve it.
Since this is such a simple fix and can have a visible performance
benefit, back-patch to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
Commit 5be8ce82e8 added a new role to the stats_ext regression suite,
but the role name did not start with regress_ causing failures when
running with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS. Fixed by
renaming the role to start with the expected regress_ prefix.
Backpatch-through: 10, same as the new regression test
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When an ownership check on extended statistics object failed, the code
was calling aclcheck_error_type to report the failure, which is clearly
wrong, resulting in cache lookup errors. Fix by calling aclcheck_error.
This issue exists since the introduction of extended statistics, so
backpatch all the way back to PostgreSQL 10. It went unnoticed because
there were no tests triggering the error, so add one.
Reported-by: Mark Dilger
Backpatch-through: 10, where extended stats were introduced
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
Most data-corruption reports mention the location of the problem, but
this one failed to. Add it.
Backpatch all the way back. In 12 and older, also assign the
ERRCODE_DATA_CORRUPTED error code as was done in commit fd6ec93bf8 for
13 and later.
Discussion: https://postgr.es/m/202108191637.oqyzrdtnheir@alvherre.pgsql
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit 1c5d9270e3, so backpatch to 12.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
If the system crashed between CREATE TABLESPACE and the next checkpoint,
the result could be some files in the tablespace unexpectedly containing
no rows. Affected files would be those for which the system did not
write WAL; see the wal_skip_threshold documentation. Before v13, a
different set of conditions governed the writing of WAL; see v12's
<sect2 id="populate-pitr">. (The v12 conditions were broader in some
ways and narrower in others.) Users may want to audit non-default
tablespaces for unexpected short files. The bug could have truncated an
index without affecting the associated table, and reindexing the index
would fix that particular problem.
This fixes the bug by making create_tablespace_directories() more like
TablespaceCreateDbspace(). create_tablespace_directories() was
recursively removing tablespace contents, reasoning that WAL redo would
recreate everything removed that way. That assumption holds for other
wal_level values. Under wal_level=minimal, the old approach could
delete files for which no other copy existed. Back-patch to 9.6 (all
supported versions).
Reviewed by Robert Haas and Prabhat Sahu. Reported by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoaLO9ncuwvr2nN-J4VEP5XyAcy=zKiHxQzBbFRxxGxm0w@mail.gmail.com
Somehow, spgist overlooked the need to call pgstat_count_index_scan().
Hence, pg_stat_all_indexes.idx_scan and equivalent columns never
became nonzero for an SP-GiST index, although the related per-tuple
counters worked fine.
This fix works a bit differently from other index AMs, in that the
counter increment occurs in spgrescan not spggettuple/spggetbitmap.
It looks like this won't make the user-visible semantics noticeably
different, so I won't go to the trouble of introducing an is-this-
the-first-call flag just to make the counter bumps happen in the
same places.
Per bug #17163 from Christian Quest. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/17163-b8c5cc88322a5e92@postgresql.org
Pengchengliu reported an assertion failure in a parallel woker while
performing a parallel scan using an overflowed snapshot. The proximate
cause is that TransactionXmin was set to an incorrect value. The
underlying cause is incorrect snapshot handling in parallel.c.
In particular, InitializeParallelDSM() was unconditionally calling
GetTransactionSnapshot(), because I (rhaas) mistakenly thought that
was always retrieving an existing snapshot whereas, at isolation
levels less than REPEATABLE READ, it's actually taking a new one. So
instead do this only at higher isolation levels where there actually
is a single snapshot for the whole transaction.
By itself, this is not a sufficient fix, because we still need to
guarantee that TransactionXmin gets set properly in the workers. The
easiest way to do that seems to be to install the leader's active
snapshot as the transaction snapshot if the leader did not serialize a
transaction snapshot. This doesn't affect the results of future
GetTrasnactionSnapshot() calls since those have to take a new snapshot
anyway; what we care about is the side effect of setting TransactionXmin.
Report by Pengchengliu. Patch by Greg Nancarrow, except for some comment
text which I supplied.
Discussion: https://postgr.es/m/002f01d748ac$eaa781a0$bff684e0$@tju.edu.cn
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
There are two identical error messages about valid value of modulus for
hash partition, in PostgreSQL source code. Commit 0e1275fb07 improved
only one of them so that ambiguous word "positive" was avoided there,
and forgot to improve the other. This commit improves the other.
Which would reduce translator burden.
Back-pach to v11 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
The distance in phrase operator must be an integer value between zero
and MAXENTRYPOS inclusive. But previously the error message about
its valid value included the information about its upper limit
but not lower limit (i.e., zero). This commit improves the error message
so that it also includes the information about its lower limit.
Back-patch to v9.6 where full-text phrase search was supported.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
Regexps like "(.){0}...\1" drew an "invalid backreference number".
That's not unreasonable on its face, since the capture group will
never be matched if it's iterated zero times. However, other engines
such as Perl's don't complain about this, nor do we throw an error for
related cases such as "(.)|\1", even though that backref can never
succeed either. Also, if the zero-iterations case happens at runtime
rather than compile time --- say, "(x)*...\1" when there's no "x" to
be found --- that's not an error, we just deem the backref to not
match. Making this even less defensible, no error was thrown for
nested cases such as "((.)){0}...\2"; and to add insult to injury,
those cases could result in assertion failures instead. (It seems
that nothing especially bad happened in non-assert builds, though.)
Let's just fix it so that no error is thrown and instead the backref
is deemed to never match, so that compile-time detection of no
iterations behaves the same as run-time detection.
Per report from Mark Dilger. This appears to be an aboriginal error
in Spencer's library, so back-patch to all supported versions.
Pre-v14, it turns out to also be necessary to back-patch one aspect of
commits cb76fbd7e/00116dee5, namely to create capture-node subREs with
the begin/end states of their subexpressions, not the current lp/rp
of the outer parseqatom invocation. Otherwise delsub complains that
we're trying to disconnect a state from itself. This is a bit scary
but code examination shows that it's safe: in the pre-v14 code, if we
want to wrap iteration around the subexpression, the first thing we do
is overwrite the atom's begin/end fields with new states. So the
bogus values didn't survive long enough to be used for anything, except
if no iteration is required, in which case it doesn't matter.
Discussion: https://postgr.es/m/A099E4A8-4377-4C64-A98C-3DEDDC075502@enterprisedb.com
The recursion in cdissect() was careless about clearing match data
for capturing parentheses after rejecting a partial match. This
could allow a later back-reference to succeed when by rights it
should fail for lack of a defined referent.
To fix, think a little more rigorously about what the contract
between different levels of cdissect's recursion needs to be.
With the right spec, we can fix this using fewer rather than more
resets of the match data; the key decision being that a failed
sub-match is now explicitly responsible for clearing any matches
it may have set.
There are enough other cross-checks and optimizations in the code
that it's not especially easy to exhibit this problem; usually, the
match will fail as-expected. Plus, regexps that are even potentially
vulnerable are most likely user errors, since there's just not much
point in writing a back-ref that doesn't always have a referent.
These facts perhaps explain why the issue hasn't been detected,
even though it's almost certainly a couple of decades old.
Discussion: https://postgr.es/m/151435.1629733387@sss.pgh.pa.us
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
In a backup manifest, WAL-Ranges stores the range of WAL that is
required for the backup to be valid. pg_verifybackup would then
internally use pg_waldump for the checks based on this data.
When the timeline where the backup started was more than 1 with a
history file looked at for the manifest data generation, the calculation
of the WAL range for the first timeline to check was incorrect. The
previous logic used as start LSN the start position of the first
timeline, but it needs to use the start LSN of the backup. This would
cause failures with pg_verifybackup, or any tools making use of the
backup manifests.
This commit adds a test based on a logic using a self-promoted node,
making it rather cheap.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210818.143031.1867083699202617521.horikyota.ntt@gmail.com
Backpatch-through: 13
After detecting a sub-match "dissect" failure (i.e., a backref match
failure) in the i'th sub-match of an iteration node, we should proceed
by adjusting the attempted length of the i'th submatch. As coded,
though, these functions changed the attempted length of the *last*
sub-match, and only after exhausting all possibilities for that would
they back up to adjust the next-to-last sub-match, and then the
second-from-last, etc; all of which is wasted effort, since only
changing the start or length of the i'th sub-match can possibly make
it succeed. This oversight creates the possibility for exponentially
bad performance. Fortunately the problem is masked in most cases by
optimizations or constraints applied elsewhere; which explains why
we'd not noticed it before. But it is possible to reach the problem
with fairly simple, if contrived, regexps.
Oversight in my commit 173e29aa5. That's pretty ancient now,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1808998.1629412269@sss.pgh.pa.us
transformLockingClause neglected to exclude the pseudo-RTEs for
OLD/NEW when processing a rule's query. This led to odd errors
or even crashes later on. This bug is very ancient, but it's
not terribly surprising that nobody noticed, since the use-case
for SELECT FOR UPDATE in a non-view rule is somewhere between
thin and non-existent. Still, crashing is not OK.
Per bug #17151 from Zhiyong Wu. Thanks to Masahiko Sawada
for analysis of the problem.
Discussion: https://postgr.es/m/17151-c03a3e6e4ec9aadb@postgresql.org
Recursion into the FILTER clause was mis-implemented, such that a
relevant Var or Aggref at the very top of the FILTER clause would
be ignored. (Of course, that'd have to be a plain boolean Var or
boolean-returning aggregate.) The consequence would be
mis-identification of the correct semantic level of the aggregate,
which could lead to not-per-spec query behavior. If the FILTER
expression is an aggregate, this could also lead to failure to issue
an expected "aggregate function calls cannot be nested" error, which
would likely result in a core dump later on, since the planner and
executor aren't expecting such cases to appear.
The root cause is that commit b560ec1b0 blindly copied some code
that assumed it's recursing into a List, and thus didn't examine the
top-level node. To forestall questions about why this call doesn't
look like the others, as well as possible future copy-and-paste
mistakes, let's change all three check_agg_arguments_walker calls in
check_agg_arguments, even though only the one for the filter clause
is really broken.
Per bug #17152 from Zhiyong Wu. This has been wrong since we
implemented FILTER, so back-patch to all supported versions.
(Testing suggests that pre-v11 branches manage to avoid crashing
in the bad-Aggref case, thanks to "redundant" checks in ExecInitAgg.
But I'm not sure how thorough that protection is, and anyway the
wrong-behavior issue remains, so fix 9.6 and 10 too.)
Discussion: https://postgr.es/m/17152-c7f906cc1a88e61b@postgresql.org
If recordDependencyOnCurrentExtension is invoked on a pre-existing,
free-standing object during an extension update script, that object
will become owned by the extension. In our current code this is
possible in three cases:
* Replacing a "shell" type or operator.
* CREATE OR REPLACE overwriting an existing object.
* ALTER TYPE SET, ALTER DOMAIN SET, and ALTER OPERATOR SET.
The first of these cases is intentional behavior, as noted by the
existing comments for GenerateTypeDependencies. It seems like
appropriate behavior for CREATE OR REPLACE too; at least, the obvious
alternatives are not better. However, the fact that it happens during
ALTER is an artifact of trying to share code (GenerateTypeDependencies
and makeOperatorDependencies) between the CREATE and ALTER cases.
Since an extension script would be unlikely to ALTER an object that
didn't already belong to the extension, this behavior is not very
troubling for the direct target object ... but ALTER TYPE SET will
recurse to dependent domains, and it is very uncool for those to
become owned by the extension if they were not already.
Let's fix this by redefining the ALTER cases to never change extension
membership, full stop. We could minimize the behavioral change by
only changing the behavior when ALTER TYPE SET is recursing to a
domain, but that would complicate the code and it does not seem like
a better definition.
Per bug #17144 from Alex Kozhemyakin. Back-patch to v13 where ALTER
TYPE SET was added. (The other cases are older, but since they only
affect the directly-named object, there's not enough of a problem to
justify changing the behavior further back.)
Discussion: https://postgr.es/m/17144-e67d7a8f049de9af@postgresql.org
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
This commit ensures that the wait interval in the replay delay loop
waiting for an amount of time defined by recovery_min_apply_delay is
correctly handled on reload, recalculating the delay if this GUC value
is updated, based on the timestamp of the commit record being replayed.
The previous behavior would be problematic for example with replay
still waiting even if the delay got reduced or just cancelled. If the
apply delay was increased to a larger value, the wait would have just
respected the old value set, finishing earlier.
Author: Soumyadeep Chakraborty, Ashwin Agrawal
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAE-ML+93zfr-HLN8OuxF0BjpWJ17O5dv1eMvSE5jsj9jpnAXZA@mail.gmail.com
Backpatch-through: 9.6
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
It's hard to disable ASLR on current macOS releases, for testing with
-DEXEC_BACKEND. You could already set the environment variable
PG_SHMEM_ADDR to something not likely to collide with mappings created
earlier in process startup. Let's also provide a default value that
works on current releases and architectures, for developer convenience.
As noted in the pre-existing comment, this is a horrible hack, but
-DEXEC_BACKEND is only used by Unix-based PostgreSQL developers for
testing some otherwise Windows-only code paths, so it seems excusable.
Back-patch to all supported branches.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
Rather than trying to pick table aliases that won't conflict with
any possible user-defined matview column name, adjust the queries'
syntax so that the aliases are only used in places where they can't be
mistaken for column names. Mostly this consists of writing "alias.*"
not just "alias", which adds clarity for humans as well as machines.
We do have the issue that "SELECT alias.*" acts differently from
"SELECT alias", but we can use the same hack ruleutils.c uses for
whole-row variables in SELECT lists: write "alias.*::compositetype".
We might as well revert to the original aliases after doing this;
they're a bit easier to read.
Like 75d66d10e, back-patch to all supported branches.
Discussion: https://postgr.es/m/2488325.1628261320@sss.pgh.pa.us
Formerly, the numeric code tested whether an integer value of a larger
type would fit in a smaller type by casting it to the smaller type and
then testing if the reverse conversion produced the original value.
That's perfectly fine, except that it caused a test failure on
buildfarm animal castoroides, most likely due to a compiler bug.
Instead, do these tests by comparing against PG_INT16/32_MIN/MAX. That
matches existing code in other places, such as int84(), which is more
widely tested, and so is less likely to go wrong.
While at it, add regression tests covering the numeric-to-int8/4/2
conversions, and adjust the recently added tests to the style of
434ddfb79a (on the v11 branch) to make failures easier to diagnose.
Per buildfarm via Tom Lane, reviewed by Tom Lane.
Discussion: https://postgr.es/m/2394813.1628179479%40sss.pgh.pa.us
This fixes a long-standing bug when using to_char() to format a
numeric value in scientific notation -- if the value's exponent is
less than -NUMERIC_MAX_DISPLAY_SCALE-1 (-1001), it produced a
division-by-zero error.
The reason for this error was that get_str_from_var_sci() divides its
input by 10^exp, which it produced using power_var_int(). However, the
underflow test in power_var_int() causes it to return zero if the
result scale is too small. That's not a problem for power_var_int()'s
only other caller, power_var(), since that limits the rscale to 1000,
but in get_str_from_var_sci() the exponent can be much smaller,
requiring a much larger rscale. Fix by introducing a new function to
compute 10^exp directly, with no rscale limit. This also allows 10^exp
to be computed more efficiently, without any numeric multiplication,
division or rounding.
Discussion: https://postgr.es/m/CAEZATCWhojfH4whaqgUKBe8D5jNHB8ytzemL-PnRx+KCTyMXmg@mail.gmail.com
As of commit 84f5c2908, executing SQL commands (via SPI or otherwise)
requires having either an active Portal, or a caller-established
active snapshot. We were simply Assert'ing that that's the case.
But we've now had a couple different reports of people testing
extensions that didn't meet this requirement, and were confused by
the resulting crash. Let's convert the Assert to a test-and-elog,
in hopes of making the issue clearer for extension authors.
Per gripes from Liu Huailing and RekGRpth. Back-patch to v11,
like the prior commit.
Discussion: https://postgr.es/m/OSZPR01MB6215671E3C5956A034A080DFBEEC9@OSZPR01MB6215.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/17035-14607d308ac8643c@postgresql.org
This fixes a couple of related problems that arise when raising
numbers to very large powers.
Firstly, when raising a negative number to a very large integer power,
the result should be well-defined, but the previous code would only
cope if the exponent was small enough to go through power_var_int().
Otherwise it would throw an internal error, attempting to take the
logarithm of a negative number. Fix this by adding suitable handling
to the general case in power_var() to cope with negative bases,
checking for integer powers there.
Next, when raising a (positive or negative) number whose absolute
value is slightly less than 1 to a very large power, the result should
approach zero as the power is increased. However, in some cases, for
sufficiently large powers, this would lose all precision and return 1
instead of 0. This was due to the way that the local_rscale was being
calculated for the final full-precision calculation:
local_rscale = rscale + (int) val - ln_dweight + 8
The first two terms on the right hand side are meant to give the
number of significant digits required in the result ("val" being the
estimated result weight). However, this failed to account for the fact
that rscale is clipped to a maximum of NUMERIC_MAX_DISPLAY_SCALE
(1000), and the result weight might be less then -1000, causing their
sum to be negative, leading to a loss of precision. Fix this by
forcing the number of significant digits calculated to be nonnegative.
It's OK for it to be zero (when the result weight is less than -1000),
since the local_rscale value then includes a few extra digits to
ensure an accurate result.
Finally, add additional underflow checks to exp_var() and power_var(),
so that they consistently return zero for cases like this where the
result is indistinguishable from zero. Some paths through this code
already returned zero in such cases, but others were throwing overflow
errors.
Dean Rasheed, reviewed by Yugo Nagata.
Discussion: http://postgr.es/m/CAEZATCW6Dvq7+3wN3tt5jLj-FyOcUgT5xNoOqce5=6Su0bCR0w@mail.gmail.com
Buildfarm shows that this test has a further failure mode when a
checkpoint starts earlier than expected, so we detect a "checkpoint
completed" line that's not the one we want. Change the config to try
and prevent this.
Per buildfarm
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210729.162038.534808353849568395.horikyota.ntt@gmail.com
pg_verifybackup needs by default pg_waldump to check after a range of
WAL segments required for a backup, except if --no-parse-wal is
specified. The code checked for the presence of the binary pg_waldump
in an installation and reported an error, but it forgot to properly
exit(). This could lead to confusing errors reported.
Reviewed-by: Robert Haas, Fabien Coelho
Discussion: https://postgr.es/m/YQDMdB+B68yePFeT@paquier.xyz
Backpatch-through: 13
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Commit 7bffc9b7bf changed xact_redo_commit() so that it updates
minRecoveryPoint on truncation, but forgot to change xact_redo_abort().
Back-patch to all supported versions.
Reported-by: mengjuan.cmj@alibaba-inc.com
Author: Fujii Masao
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/b029fce3-4fac-4265-968e-16f36ff4d075.mengjuan.cmj@alibaba-inc.com
This changes the behavior of examining the pg_file_settings view after
changing a config option that requires restart. The user needs to know
that any change of such options does not take effect until a restart,
and this worked correctly if the line is edited without removing it.
However, for the case where the line is removed altogether, the flag
doesn't get set, because a flag was only set in set_config_option, but
that's not called for lines removed. Repair.
(Ref.: commits 62d16c7fc5 and a486e35706)
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202107262302.xsfdfc5sb7sh@alvherre.pgsql
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
These have been introduced by 7fbe0c8, and could happen for
pg_basebackup and pg_receivewal.
Per report from Coverity for the ones in walmethods.c, I have spotted
the ones in receivelog.c after more review.
Backpatch-through: 10
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
This commit changes the startup process in the standby server so that
it handles the interrupt signals after waiting for wal_retrieve_retry_interval
on the latch and resetting it, before entering another wait on the latch.
This change causes the standby server to promptly handle interrupt signals.
Otherwise, previously, there was the case where the standby needs to
wait extra five seconds to shutdown when the shutdown request arrived
while the startup process was waiting for wal_retrieve_retry_interval
on the latch.
Author: Fujii Masao, but implementation idea is from Soumyadeep Chakraborty
Reviewed-by: Soumyadeep Chakraborty
Discussion: https://postgr.es/m/9d7e6ab0-8a53-ddb9-63cd-289bcb25fe0e@oss.nttdata.com
Per discussion of BUG #17073, back-patch to all supported versions.
Discussion: https://postgr.es/m/17073-1a5fdaed0fa5d4d0@postgresql.org
We have an implementation restriction that PREPARE TRANSACTION can't
handle cases where both session-lifespan and transaction-lifespan locks
are held on the same lockable object. (That's because we'd otherwise
need to acquire a new PROCLOCK entry during post-prepare cleanup, which
is an operation that might fail. The situation can only arise with odd
usages of advisory locks, so removing the restriction is probably not
worth the amount of effort it would take.) AtPrepare_Locks attempted
to enforce this, but its logic was many bricks shy of a load, because
it only detected cases where the session and transaction locks had the
same lockmode. Locks of different modes on the same object would lead
to the rather unhelpful message "PANIC: we seem to have dropped a bit
somewhere".
To fix, build a transient hashtable with one entry per locktag,
not one per locktag + mode, and use that to detect conflicts.
Per bug #17122 from Alexander Pyhalov. This bug is ancient,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17122-04f3c32098a62233@postgresql.org
We previously took a hard-line attitude that callers should never print
a null string pointer, and doing so is worthy of an assertion failure
or crash. However, we've long since flushed out any easy-to-find bugs
of that nature. What remains is a lot of code that perhaps could fail
that way in hard-to-reach corner cases. For example, in something as
simple as
ereport(ERROR,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("constraint \"%s\" for table \"%s\" does not exist",
conname, get_rel_name(relid))));
one must wonder whether it's completely guaranteed that get_rel_name
cannot return NULL in this context. If such a situation did occur,
the existing policy converts what might be a pretty minor bug into
a server crash condition. This is not good for robustness.
Hence, let's follow the lead of glibc and print "(null)" instead
of failing. We should, of course, still consider it a bug if that
behavior is reachable in ordinary use; but crashing seems less
desirable than not crashing.
This fix works across-the-board in v12 and up, where we always use
src/port/snprintf.c. Before that, on most platforms we're at the mercy
of the local libc, but it appears that Solaris 10 is the only supported
platform where we'd still get a crash. Most other platforms such as
*BSD, macOS, and Solaris 11 have adopted glibc's behavior at some
point. (AIX and HPUX just print "" not "(null)", but that's close
enough.) I've not checked what Windows' native printf would do, but
it doesn't matter because we've long used snprintf.c on that platform.
In v12 and up, also const-ify related code so that we're not casting
away const on the constant string. This is just neatnik-ism, since
next to no compilers will warn about that.
Discussion: https://postgr.es/m/17098-b960f3616c861f83@postgresql.org
Code inlined by LLVM can crash or fail with "Relocation type not
implemented yet!" if it tries to access thread local variables. Don't
inline such code.
Back-patch to 11, where LLVM arrived. Bug #16696.
Author: Dmitry Marakasov <amdmi3@amdmi3.ru>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/16696-29d944a33801fbfe@postgresql.org
In postgresql.conf, memory and file size GUCs can be specified with "B"
(bytes) as of b06d8e58b. Likewise, time GUCs can be specified with "us"
(microseconds) as of caf626b2c. Update postgres.conf.sample to reflect
that fact.
Pavel Luzanov
Backpatch to v12, which is the earliest version that allows both of
these units. A separate commit will document the "B" case for v11.
Discussion: https://www.postgresql.org/message-id/flat/f10d16fc-8fa0-1b3c-7371-cb3a35a13b7a%40postgrespro.ru
If an error was raised during our initial attempt to check whether
a successfully-compiled expression is "simple", subsequent calls of
exec_stmt_execsql would suppose that stmt->mod_stmt was already computed
when it had not been. This could lead to assertion failures in debug
builds; in production builds the effect would typically be to act as
if INTO STRICT had been specified even when it had not been. Of course
that only matters if the subsequent attempt to execute the expression
succeeds, so that the problem can only be reached by fixing a failure
in some referenced, inline-able SQL function and then retrying the
calling plpgsql function in the same session.
(There might be even-more-obscure ways to change the expression's
behavior without changing the plpgsql function, but that one seems
like the only one people would be likely to hit in practice.)
The most foolproof way to fix this would be to arrange for
exec_prepare_plan to not set expr->plan until we've finished the
subsidiary simple-expression check. But it seems hard to do that
without creating reference-count leak issues. So settle for documenting
the hazard in a comment and fixing exec_stmt_execsql to test separately
for whether it's computed stmt->mod_stmt. (That adds a test-and-branch
per execution, but hopefully that's negligible in context.) In v11 and
up, also fix exec_stmt_call which had a variant of the same issue.
Per bug #17113 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17113-077605ce00e0e7ec@postgresql.org
The logic handling the opening of new WAL segments was fuzzy when using
--compress if a partial, non-compressed, segment with the same base name
existed in the repository storing those files. In this case, using
--compress would cause the code to first check for the existence and the
size of a non-compressed segment, followed by the opening of a new
compressed, partial, segment. The code was accidentally working
correctly on most platforms as the buildfarm has proved, except
bowerbird where gzflush() could fail in this code path. It is wrong
anyway to take the code path used pre-padding when creating a new
partial, non-compressed, segment, so let's fix it.
Note that this issue exists when users mix successive runs of
pg_receivewal with or without compression, as discovered with the tests
introduced by ffc9dda.
While on it, this refactors the code so as code paths that need to know
about the ".gz" suffix are down from four to one in walmethods.c, easing
a bit the introduction of new compression methods. This addresses a
second issue where log messages generated for an unexpected failure
would not show the compressed segment name involved, which was
confusing, printing instead the name of the non-compressed equivalent.
Reported-by: Georgios Kokolatos
Discussion: https://postgr.es/m/YPDLz2x3o1aX2wRh@paquier.xyz
Backpatch-through: 10
We don't allow to create replication slot_name as an empty string ('') via
SQL API pg_create_logical_replication_slot() but it is allowed to be set
via Alter Subscription command. This will lead to apply worker repeatedly
keep trying to stream data via slot_name '' and the user is not allowed to
create the slot with that name.
Author: Japin Li
Reviewed-By: Ranier Vilela, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/MEYP282MB1669CBD98E721C77CA696499B61A9@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
The new test code added in ead9e51e82 is racy -- it hinges on
shared-memory state, which changes before the WARNING message is logged.
Put it the other way around.
Backpatch to 13.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202107161809.zclasccpfcg3@alvherre.pgsql
pg_dump failed to preserve the 'enabled' flag (which can be not only
disabled, but also REPLICA or ALWAYS) for partitions which had it
changed from their respective parents. Attempt to handle that by
including a definition for such triggers in the dump, but replace the
standard CREATE TRIGGER line with an ALTER TRIGGER line.
Backpatch to 11, where these triggers can exist. In branches 11 and 12,
pick up a few test lines from commit b9b408c487 to verify that
pg_upgrade is okay with these arrangements.
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When triggers are cloned from partitioned tables to their partitions,
the 'tgenabled' flag (origin/replica/always/disable) was not propagated.
Make it so that the flag on the trigger on partition is initially set to
the same value as on the partitioned table.
Add a test case to verify the behavior.
Backpatch to 11, where this appeared in commit 86f575948c.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c655077639 we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
Autoconf's AC_CHECK_DECLS() always defines HAVE_DECL_whatever
as 1 or 0, but some of the entries in msvc/Solution.pm showed
such symbols as "undef" instead of 0. Fix that for consistency.
There's no live bug in current usages AFAICS, but it's not hard
to imagine one creeping in if more-complex #if tests get added.
Back-patch to v13, which is as far back as Solution.pm contains
this data. The inconsistency still exists in the manually-filled
pg_config_ext.h.win32 files of older branches; but as long as the
problem is only latent, it doesn't seem worth the trouble to
clean things up there.
Discussion: https://postgr.es/m/3185430.1626133592@sss.pgh.pa.us
Some commands of ALTER TABLE could fail with the following error:
ERROR: "tab" is of the wrong type
This error is unexpected, as all the code paths leading to
ATWrongRelkindError() should use a supported set of relkinds to generate
correct error messages. This commit closes the gap with such mistakes,
by adding all the missing relkind combinations. Tests are added to
check all the problems found. Note that some combinations are not used,
but these are left around as it could have an impact on applications
relying on this code.
2ed532e has done a much larger refactoring on HEAD to make such error
messages easier to manage in the long-term, so nothing is needed there.
Author: Kyotaro Horiguchi
Reviewed-by: Peter Eisentraut, Ahsan Hadi, Michael Paquier
Discussion: https://postgr.es/m/20210216.181415.368926598204753659.horikyota.ntt@gmail.com
Backpatch-through: 11
41469253e went to the trouble of removing a theoretical bug from
free_sort_tuple by checking if the tuple was NULL before freeing it. Let's
make this a little more robust by also setting the tuple to NULL so that
should we be called again we won't end up doing a pfree on the already
pfree'd tuple. Per advice from Tom Lane.
Discussion: https://postgr.es/m/3188192.1626136953@sss.pgh.pa.us
Backpatch-through: 9.6, same as 41469253e
This fixes a theoretical bug in tuplesort.c which, if a bounded sort was
used in combination with a byval Datum sort (tuplesort_begin_datum), when
switching the sort to a bounded heap in make_bounded_heap(), we'd call
free_sort_tuple(). The problem was that when sorting Datums of a byval
type, the tuple is NULL and free_sort_tuple() would free the memory for it
regardless of that. This would result in a crash.
Here we fix that simply by adding a check to see if the tuple is NULL
before trying to disassociate and free any memory belonging to it.
The reason this bug is only theoretical is that nowhere in the current
code base do we do tuplesort_set_bound() when performing a Datum sort.
However, let's backpatch a fix for this as if any extension uses the code
in this way then it's likely to cause problems.
Author: Ronan Dunklau
Discussion: https://postgr.es/m/CAApHDvpdoqNC5FjDb3KUTSMs5dg6f+XxH4Bg_dVcLi8UYAG3EQ@mail.gmail.com
Backpatch-through: 9.6, oldest supported version
This should have been removed in commit 7e30c186da, which split the loop
into two. Only the first loop uses the 'from' variable; updating it in
the second loop is bogus. It was never read after the first loop, so this
was harmless and surely optimized away by the compiler, but let's be tidy.
Backpatch to all supported versions.
Author: Ranier Vilela
Discussion: https://www.postgresql.org/message-id/CAEudQAoWq%2BAL3BnELHu7gms2GN07k-np6yLbukGaxJ1vY-zeiQ%40mail.gmail.com
Although we were careful to lock the object being added or dropped,
we failed to get any sort of lock on the extension itself. This
allowed the ALTER to proceed in parallel with a DROP EXTENSION,
which is problematic for a couple of reasons. If both commands
succeeded we'd be left with a dangling link in pg_depend, which
would cause problems later. Also, if the ALTER failed for some
reason, it might try to print the extension's name, and that could
result in a crash or (in older branches) a silly error message
complaining about extension "(null)".
Per bug #17098 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17098-b960f3616c861f83@postgresql.org
If an error occurred in the wrong place, it was possible to leave an
unintialized entry in the hash table, leading to a crash. Fixed.
Also, be more careful about the order of operations so that an
allocation error doesn't leak memory in CacheMemoryContext or
unnecessarily advance NextRecordTypmod.
Backpatch through version 11. Earlier versions (prior to 35ea75632a)
do not exhibit the problem, because an uninitialized hash entry
contains a valid empty list.
Author: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/HE1PR8303MB009069D476225B9A9E194B8891779@HE1PR8303MB0090.EURPRD83.prod.outlook.com
Backpatch-through: 11
This fixes an overflow error when using the numeric * operator if the
result has more than 16383 digits after the decimal point by rounding
the result. Overflow errors should only occur if the result has too
many digits *before* the decimal point.
Discussion: https://postgr.es/m/CAEZATCUmeFWCrq2dNzZpRj5+6LfN85jYiDoqm+ucSXhb9U2TbA@mail.gmail.com
Commit 7266d0997 added code to pull up simple constant function
results, converting the RTE_FUNCTION RTE to a dummy RTE_RESULT
RTE since it no longer need be scanned. But I forgot to clear
the LATERAL flag if the RTE has it set. If the function reduced
to a constant, it surely contains no lateral references so this
simplification is logically OK. It's needed because various other
places will Assert that RESULT RTEs aren't LATERAL.
Per bug #17097 from Yaoguang Chen. Back-patch to v13 where the
faulty code came in.
Discussion: https://postgr.es/m/17097-3372ef9f798fc94f@postgresql.org
The separate libldap_r is gone and libldap itself is now always
thread-safe. Unfortunately there seems no easy way to tell by
inspection whether libldap is thread-safe, so we have to take
it on faith that libldap is thread-safe if there's no libldap_r.
That should be okay, as it appears that libldap_r was a standard
part of the installation going back at least 20 years.
Report and patch by Adrian Ho. Back-patch to all supported
branches, since people might try to build any of them with
a newer OpenLDAP.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
Since the executor can't cope with a utility statement appearing
as a node of a plan tree, we can't support cases where a rewrite
rule inserts a NOTIFY into an INSERT/UPDATE/DELETE command appearing
in a WITH clause of a larger query. (One can imagine ways around
that, but it'd be a new feature not a bug fix, and so far there's
been no demand for it.) RewriteQuery checked for this, but it
missed the case where the DML command rewrites to *only* a NOTIFY.
That'd lead to crashes later on in planning. Add the missed check,
and improve the level of testing of this area.
Per bug #17094 from Yaoguang Chen. It's been busted since WITH
was introduced, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17094-bf15dff55eaf2e28@postgresql.org
Due to how pg_size_pretty(bigint) was implemented, it's possible that when
given a negative number of bytes that the returning value would not match
the equivalent positive return value when given the equivalent positive
number of bytes. This was due to two separate issues.
1. The function used bit shifting to convert the number of bytes into
larger units. The rounding performed by bit shifting is not the same as
dividing. For example -3 >> 1 = -2, but -3 / 2 = -1. These two
operations are only equivalent with positive numbers.
2. The half_rounded() macro rounded towards positive infinity. This meant
that negative numbers rounded towards zero and positive numbers rounded
away from zero.
Here we fix#1 by dividing the values instead of bit shifting. We fix#2
by adjusting the half_rounded macro always to round away from zero.
Additionally, adjust the pg_size_pretty(numeric) function to be more
explicit that it's using division rather than bit shifting. A casual
observer might have believed bit shifting was used due to a static
function being named numeric_shift_right. However, that function was
calculating the divisor from the number of bits and performed division.
Here we make that more clear. This change is just cosmetic and does not
affect the return value of the numeric version of the function.
Here we also add a set of regression tests both versions of
pg_size_pretty() which test the values directly before and after the
function switches to the next unit.
This bug was introduced in 8a1fab36a. Prior to that negative values were
always displayed in bytes.
Author: Dean Rasheed, David Rowley
Discussion: https://postgr.es/m/CAEZATCXnNW4HsmZnxhfezR5FuiGgp+mkY4AzcL5eRGO4fuadWg@mail.gmail.com
Backpatch-through: 9.6, where the bug was introduced.
Commit 03ffc4d6d added logic to bypass all caching behavior in
LookupOpclassInfo when CLOBBER_CACHE_ALWAYS is enabled. It doesn't
look like I stopped to think much about what that would cost, but
recent investigation shows that the cost is enormous: it roughly
doubles the time needed for cache-clobber test runs.
There does seem to be value in this behavior when trying to test
the opclass-cache loading logic itself, but for other purposes the
cost is excessive. Hence, let's back off to doing this only when
debug_invalidate_system_caches_always is at least 3; or in older
branches, when CLOBBER_CACHE_RECURSIVELY is defined.
While here, clean up some other minor issues in LookupOpclassInfo.
Re-order the code so we aren't left with broken cache entries (leading
to later core dumps) in the unlikely case that we suffer OOM while
trying to allocate space for a new entry. (That seems to be my
oversight in 03ffc4d6d.) Also, in >= v13, stop allocating one array
entry too many. That's evidently left over from sloppy reversion in
851b14b0c.
Back-patch to all supported branches, mainly to reduce the runtime
of cache-clobbering buildfarm animals.
Discussion: https://postgr.es/m/1370856.1625428625@sss.pgh.pa.us
The existing code tried to do syscache lookups in an already-failed
transaction, which is problematic to say the least. After some
consideration of alternatives, the best fix seems to be to just drop
type names from the error message altogether. The table and column
names seem like sufficient localization. If the user is unsure what
types are involved, she can check the local and remote table
definitions.
Having done that, we can also discard the LogicalRepTypMap hash
table, which had no other use. Arguably, LOGICAL_REP_MSG_TYPE
replication messages are now obsolete as well; but we should
probably keep them in case some other use emerges. (The complexity
of removing something from the replication protocol would likely
outweigh any savings anyhow.)
Masahiko Sawada and Bharath Rupireddy, per complaint from Andres
Freund. Back-patch to v10 where this code originated.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
The prove_installcheck recipe in src/Makefile.global.in was emitting
bogus paths for a couple of elements when used with PGXS. Here we create
a separate recipe for the PGXS case that does it correctly. We also take
the opportunity to make the make the file more readable by breaking up
the prove_installcheck and prove_check recipes across several lines, and
to remove the setting for REGRESS_SHLIB to src/test/recovery/Makefile,
which is the only set of tests that actually need it.
Backpatch to all live branches
Discussion: https://postgr.es/m/f2401388-936b-f4ef-a07c-a0bcc49b3300@dunslane.net
Causing a core dump on out-of-memory seems pretty unfriendly,
and surely is far outside the expected behavior of a general-purpose
library. Just print an error message (as we did already) and return.
These functions unfortunately don't have an error return convention,
but code using them is probably just looking for a quick-n-dirty
print method and wouldn't bother to check anyway.
Although these functions are semi-deprecated, it still seems
appropriate to back-patch this. In passing, also back-patch
b90e6cef1, just to reduce cosmetic differences between the
branches.
Discussion: https://postgr.es/m/3122443.1624735363@sss.pgh.pa.us
Instead use the common/int.h functions to check for integer overflow
in a more C-standard-compliant fashion. This is motivated by recent
failures on buildfarm member moonjelly, where it appears that
development-tip gcc is optimizing without regard to the -fwrapv
switch. Presumably that's a gcc bug that will be fixed soon, but
we might as well install cleaner coding here rather than wait.
(This does not address the question of whether we'll ever be able
to get rid of using -fwrapv. Testing shows that this spot is the
only place where doing so creates visible regression test failures,
but unfortunately that proves very little.)
Back-patch to v12. The common/int.h functions exist in v11, but
that branch doesn't use them in any client-side code. I judge
that this case isn't interesting enough in the real world to take
even a small risk of issues from being the first such use.
Tom Lane and Fabien Coelho
Discussion: https://postgr.es/m/73927.1624815543@sss.pgh.pa.us
When we cannot immediately acquire XactSLRULock in exclusive mode at
commit time, we add ourselves to a list of processes that need their XIDs
status update. We do this if the clog page where we need to update the
current transaction status is the same as the group leader's clog page,
otherwise, we allow the caller to clear it by itself. Now, when we can't
add ourselves to any group, we were not clearing the current proc if it
has already become a member of some group which was leading to an
assertion failure when the same proc was assigned to another backend after
the current backend exits.
Reported-by: Alexander Lakhin
Bug: 17072
Author: Amit Kapila
Tested-By: Alexander Lakhin
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/17072-2f8764857ef2c92a@postgresql.org
83158f7 has improved index_set_state_flags() so as it is possible to use
transactional updates when updating pg_index state flags, but there was
not really a test case which stressed directly the possibility it fixed.
This commit adds such a test, using a predicate that looks valid in
appearance but calls a stable function.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/9b905019-5297-7372-0ad2-e1a4bb66a719@postgrespro.ru
Backpatch-through: 9.6
3c84046 is the original commit that introduced index_set_state_flags(),
where the presence of SnapshotNow made necessary the use of an in-place
update. SnapshotNow has been removed in 813fb03, so there is no actual
reasons to not make this operation transactional.
As reported by Andrey, it is possible to trigger the assertion of this
routine expecting no transactional updates when switching the pg_index
state flags, using a predicate mark as immutable but calling stable or
volatile functions. 83158f7 has been around for a couple of months on
HEAD now with no issues found related to it, so it looks safe enough for
a backpatch.
Reported-by: Andrey Lepikhov
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/20200903080440.GA8559@paquier.xyz
Discussion: https://postgr.es/m/9b905019-5297-7372-0ad2-e1a4bb66a719@postgrespro.ru
Backpatch-through: 9.6
specscanner.l leaked a kilobyte of memory per token of the spec file.
Apparently somebody thought that the introductory code block would be
executed once; but it's once per yylex() call.
A couple of functions in isolationtester.c leaked small amounts of
memory due to not bothering to free one-time allocations. Might
as well improve these so that valgrind gives this program a clean
bill of health. Also get rid of an ugly static variable.
Coverity complained about one of the one-time leaks, which led me
to try valgrind'ing isolationtester, which led to discovery of the
larger leak.
The version string is grabbed from PACKAGE_VERSION in pg_config.h in the
MSVC build since 8f4fb4c6, but an error message referenced a variable
that existed before that. This had no consequences except if one messes
up enough with the version number of the build.
Author: Anton Voloshin
Discussion: https://postgr.es/m/af79ee1b-9962-b299-98e1-f90a289e19e6@postgrespro.ru
Backpatch-through: 13
002_pgbench_no_server was printing some array pointers instead of the
actual contents of those arrays for the expected outputs of stdout and
stderr for a tested command. This does not add any new information that
can help with debugging as the test names allow to track failure
locations, if any.
This commit simply removes those logs as the rest of the printed
information is redundant with command_checks_all().
Per discussion with Andrew Dunstan and Álvaro Herrera.
Discussion: https://postgr.es/m/YNXNFaG7IgkzZanD@paquier.xyz
Backpatch-through: 11
It's not really necessary for this function to open or lock the
relation associated with the pg_policy entry it's modifying. The
error checks it's making on the rel are if anything counterproductive
(e.g., if we don't want to allow installation of policies on system
catalogs, here is not the place to prevent that). In particular, it
seems just wrong to insist on an ownership check. That has the net
effect of forcing people to use superuser for DROP OWNED BY, which
surely is not an effect we want. Also there is no point in rebuilding
the dependencies of the policy expressions, which aren't being
changed. Lastly, locking the table also seems counterproductive; it's
not helping to prevent race conditions, since we failed to re-read the
pg_policy row after acquiring the lock. That means that concurrent
DDL would likely result in "tuple concurrently updated/deleted"
errors; which is the same behavior this code will produce, with less
overhead.
Per discussion of bug #17062. Back-patch to all supported versions,
as the failure cases this eliminates seem just as undesirable in 9.6
as in HEAD.
Discussion: https://postgr.es/m/1573181.1624220108@sss.pgh.pa.us
A walsender process that has executed a SQL command left the text of
that command in pg_stat_activity.query indefinitely, which is quite
confusing if it's in RUNNING state but not doing that query. An easy
and useful fix is to treat replication commands as if they were SQL
queries, and show them in pg_stat_activity according to the same rules
as for regular queries. While we're at it, it seems also sensible to
set debug_query_string, allowing error logging and debugging to see
the replication command.
While here, clean up assorted silliness in exec_replication_command:
* Clean up SQLCmd code path, and fix its only-accidentally-not-buggy
memory management.
* Remove useless duplicate call of SnapBuildClearExportedSnapshot().
* replication_scanner_finish() was never called.
Back-patch of commit f560209c6 into v10-v13. I'd originally felt
that this didn't merit back-patching, but subsequent confusion
while debugging walsender problems suggests that it'll be useful.
Also, the original commit has now aged long enough to provide some
comfort that it won't cause problems.
Discussion: https://postgr.es/m/2673480.1624557299@sss.pgh.pa.us
Discussion: https://postgr.es/m/880181.1600026471@sss.pgh.pa.us
This fixes a couple of problems within the so-said code of this commit
subject:
- Replace the use of open() with slurp_file(), fixing an issue reported
by buildfarm member fairywren whose perl installation keep around CRLF
characters, causing the matching patterns for the logs to fail.
- Remove the eval block, which is not really necessary.
This set of issues has come into light after fixing a different issue
with c13585fe, and this is wrong since this code has been introduced.
Reported-by: Andrew Dunstan, and buildfarm member fairywren
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/0f49303e-7784-b3ee-200b-cbf67be2eb9e@dunslane.net
Backpatch-through: 11
LLVM 13 (due out in September) has changed the semantics of
LLVMOrcAbsoluteSymbols(), so we need to bump some reference counts to
avoid a double-free that causes crashes and bad query results.
A proactive change seems necessary to avoid having a window of time
where our respective latest releases would interact badly. It's
possible that the situation could change before then, though.
Thanks to Fabien Coelho for monitoring bleeding edge LLVM and Andres
Freund for tracking down the change.
Back-patch to 11, where the JIT code arrived.
Discussion: https://postgr.es/m/CA%2BhUKGLEy8mgtN7BNp0ooFAjUedDTJj5dME7NxLU-m91b85siA%40mail.gmail.com
The logic checking for the format of per-thread logs used grep() with
directly "$re", which would cause the test to consider all the logs as
a match without caring about their format at all. Using "/$re/" makes
grep() perform a regex test, which is what we want here.
While on it, improve some of the tests to be more picky with the
patterns expected and add more comments to describe the tests.
Issue discovered while digging into a separate patch.
Author: Fabien Coelho, Michael Paquier
Discussion: https://postgr.es/m/YNPsPAUoVDCpPOGk@paquier.xyz
Backpatch-through: 11
Move the newly defined enum value REORDER_BUFFER_CHANGE_INTERNAL_SPEC_ABORT
at the end to avoid ABI break in the back branches. We need to back-patch
this till v11 because before that it is already at the end.
Reported-by: Tomas Vondra
Backpatch-through: 11
Discussion: https://postgr.es/m/CAExHW5sPKF-Oovx_qZe4p5oM6Dvof7_P+XgsNAViug15Fm99jA@mail.gmail.com
Contrary to the comment here, POSIX does not guarantee atomicity of a
read(), if another process calls write() concurrently. Or at least Linux
does not. Add locking to load_relmap_file() to avoid the race condition.
Fixes bug #17064. Thanks to Alexander Lakhin for the report and test case.
Backpatch-through: 9.6, all supported versions.
Discussion: https://www.postgresql.org/message-id/17064-bb0d7904ef72add3@postgresql.org
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
Our uses of gss_display_status() and gss_display_name() assumed
that the gss_buffer_desc strings returned by those functions are
null-terminated. It appears that they generally are, given the
lack of field complaints up to now. However, the available
documentation does not promise this, and some man pages
for gss_display_status() show examples that rely on the
gss_buffer_desc.length field instead of expecting null
termination. Also, we now have a report that on some
implementations, clang's address sanitizer is of the opinion
that the byte after the specified length is undefined.
Hence, change the code to rely on the length field instead.
This might well be cosmetic rather than fixing any real bug, but
it's hard to be sure, so back-patch to all supported branches.
While here, also back-patch the v12 changes that made pg_GSS_error
deal honestly with multiple messages available from
gss_display_status.
Per report from Sudheer H R.
Discussion: https://postgr.es/m/5372B6D4-8276-42C0-B8FB-BD0918826FC3@tekenlight.com
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
Commits 84f5c2908 et al missed the need to cover plpgsql's "simple
expression" code path. If the first thing we execute after a
COMMIT/ROLLBACK is one of those, rather than a full-fledged SPI command,
we must explicitly do EnsurePortalSnapshotExists() to make sure we have
an outer snapshot. Note that it wouldn't be good enough to just push a
snapshot for the duration of the expression execution: what comes back
might be toasted, so we'd better have a snapshot protecting it.
The test case demonstrating this fact cheats a bit by marking a SQL
function immutable even though it fetches from a table. That's
nothing that users haven't been seen to do, though.
Per report from Jim Nasby. Back-patch to v11, like the previous fix.
Discussion: https://postgr.es/m/378885e4-f85f-fc28-6c91-c4d1c080bf26@amazon.com
If users provide old style pre-standardized Windows locale names in a
CREATE COLLATION command, the OS is unable to provide version
information. Continue without capturing version information, rather
than exposing an OS error.
This was originally done in commit 9f12a3b9 for 14 only, to support
future features that might encounter old style names from initdb's
default. It wasn't done in 13 because I didn't consider that users
might actually want to use the old format explicitly (something we
should consider blocking in a future release with a better error
message, but that's not a policy we've decided on yet).
Back-patch to 13, based on the field complaint in pgsql-bugs #17058.
Reported-by: Yasushi Yamashita <developer@yamashi-ta.jp>
Discussion: https://postgr.es/m/17058-b49f5793c912c5aa%40postgresql.org
Ordinarily, a pg_policy.polroles array wouldn't list the same role
more than once; but CREATE POLICY does not prevent that. If we
perform DROP OWNED BY on a role that is listed more than once,
RemoveRoleFromObjectPolicy either suffered an assertion failure
or encountered a tuple-updated-by-self error. Rewrite it to cope
correctly with duplicate entries, and add a CommandCounterIncrement
call to prevent the other problem.
Per discussion, there's other cleanup that ought to happen here,
but this seems like the minimum essential fix.
Per bug #17062 from Alexander Lakhin. It's been broken all along,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17062-11f471ae3199ca23@postgresql.org
This works fine in the "simple Query" code path; but if the
statement is in the plan cache then it's corrupted for future
re-execution. Apply copyObject() to protect the original
tree from modification, as we've done elsewhere.
This narrow fix is applied only to the back branches. In HEAD,
the problem was fixed more generally by commit 7c337b6b5; but
that changed ProcessUtility's API, so it's infeasible to
back-patch.
Per bug #17053 from Charles Samborski.
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
The fast default code added in Release 11 omitted to check that the
table a fast default was being added to was a plain table. Thus one
could be added to a foreign table, which predicably blows up. Here we
perform that check.
In addition, on the back branches, since some of these might have
escaped into the wild, if we encounter a missing value for
an attribute of something other than a plain table we ignore it.
Fixes bug #17056
Backpatch to release 11,
Reviewed by: Andres Freund, Álvaro Herrera and Tom Lane
We use a tuple conversion map for partitions when replicating using an
ancestor's schema to convert tuples from partition's type to the
ancestor's. Before this map got initialized, we were processing
invalidation messages which access this map.
This issue happens only in version 13 as in HEAD we already have a code
that initializes each relation entry before we can process any
invalidation message. This issue is introduced by commit d250568121 in
version 13.
Reported-by: Tom Lane, as per buildfarm meber skink
Author: Amit Langote
Reviewed-by: Dilip Kumar, Amit Kapila
Discussion: https://www.postgresql.org/message-id/648020.1623854904@sss.pgh.pa.us
One of the error paths left *members uninitialized. That's not a live
bug, because most callers don't look at *members when the function
returns -1, but let's be tidy. One caller, in heap_lock_tuple(), does
"if (members != NULL) pfree(members)", but AFAICS it never passes an
invalid 'multi' value so it should not reach that error case.
The callers are also a bit inconsistent in their expectations.
heap_lock_tuple() pfrees the 'members' array if it's not-NULL, others
pfree() it if "nmembers >= 0", and others if "nmembers > 0". That's
not a live bug either, because the function should never return 0, but
add an Assert for that to make it more clear. I left the callers alone
for now.
I also moved the line where we set *nmembers. It wasn't wrong before,
but I like to do that right next to the 'return' statement, to make it
clear that it's always set on return.
Also remove one unreachable return statement after ereport(ERROR), for
brevity and for consistency with the similar if-block right after it.
Author: Greg Nancarrow with the additional changes by me
Backpatch-through: 9.6, all supported versions
When stuffing a plan from the plancache into a Portal, one is
not supposed to risk throwing an error between GetCachedPlan and
PortalDefineQuery; if that happens, the plan refcount incremented
by GetCachedPlan will be leaked. I managed to break this rule
while refactoring code in 9dbf2b7d7. There is no visible
consequence other than some memory leakage, and since nobody is
very likely to trigger the relevant error conditions many times
in a row, it's not surprising we haven't noticed. Nonetheless,
it's a bug, so rearrange the order of operations to remove the
hazard.
Noted on the way to looking for a better fix for bug #17053.
This mistake is pretty old, so back-patch to all supported
branches.
Since commit c24dcd0cfd, we have been using pg_pread() to read the WAL
file, which doesn't change the seek position (unless we fall back to
the implementation in src/port/pread.c). Update comment accordingly.
Backpatch-through: 12, where we started to use pg_pread()
TestLib::perl2host can take a file argument as well as a directory
argument, so that code becomes substantially simpler. Also add comments
on why we're using forward slashes, and why we're setting
PERL_BADLANG=0.
Discussion: https://postgr.es/m/e9947bcd-20ee-027c-f0fe-01f736b7e345@dunslane.net
During decoding for speculative inserts, we were relying for cleaning
toast hash on confirmation records or next change records. But that
could lead to multiple problems (a) memory leak if there is neither a
confirmation record nor any other record after toast insertion for a
speculative insert in the transaction, (b) error and assertion failures
if the next operation is not an insert/update on the same table.
The fix is to start queuing spec abort change and clean up toast hash
and change record during its processing. Currently, we are queuing the
spec aborts for both toast and main table even though we perform cleanup
while processing the main table's spec abort record. Later, if we have a
way to distinguish between the spec abort record of toast and the main
table, we can avoid queuing the change for spec aborts of toast tables.
Reported-by: Ashutosh Bapat
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 9.6, where it was introduced
Discussion: https://postgr.es/m/CAExHW5sPKF-Oovx_qZe4p5oM6Dvof7_P+XgsNAViug15Fm99jA@mail.gmail.com
This should have been updated in d2d8a229b, but it was overlooked.
According to 31a877f18 which added it, this file is meant to show the
results you get under default_transaction_isolation = serializable.
We've largely lost track of that goal in other isolation tests, but
as long as we've got this one, it should be right.
Noted while fooling about with the isolationtester.
Recent glibc versions have made mktime() fail if tm_isdst is
inconsistent with the prevailing timezone; in particular it fails for
tm_isdst = 1 when the zone is UTC. (This seems wildly inconsistent
with the POSIX-mandated treatment of "incorrect" values for the other
fields of struct tm, so if you ask me it's a bug, but I bet they'll
say it's intentional.) This has been observed to cause cosmetic
problems when pg_restore'ing an archive created in a different
timezone.
To fix, do mktime() using the field values from the archive, and if
that fails try again with tm_isdst = -1. This will give a result
that's off by the UTC-offset difference from the original zone, but
that was true before, too. It's not terribly critical since we don't
do anything with the result except possibly print it. (Someday we
should flush this entire bit of logic and record a standard-format
timestamp in the archive instead. That's not okay for a back-patched
bug fix, though.)
Also, guard our only other use of mktime() by having initdb's
build_time_t() set tm_isdst = -1 not 0. This case could only have
an issue in zones that are DST year-round; but I think some do exist,
or could in future.
Per report from Wells Oliver. Back-patch to all supported
versions, since any of them might need to run with a newer glibc.
Discussion: https://postgr.es/m/CAOC+FBWDhDHO7G-i1_n_hjRzCnUeFO+H-Czi1y10mFhRWpBrew@mail.gmail.com
Translate path slashes on target directory path. This was confusing old
branches, but is applied to all branches for the sake of uniformity.
Perl is perfectly able to understand paths with forward slashes.
Along the way, restore the previous archive_wait query, for the sake of
uniformity with other tests, per gripe from Tom Lane.
This is similar to the work done in 8279f68 for TestLib.pm, where
environment variables set may cause unwanted failures if using a
temporary installation with pg_regress. The list of variables reset is
adjusted in each stable branch depending on what is supported.
Comments are added to remember that the lists in TestLib.pm and
pg_regress.c had better be kept in sync.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/YMNR9GYDn+fHlMta@paquier.xyz
Backpatch-through: 9.6
Several TAP tests use poll_query_until() to wait for the postmaster
to restart. They were checking to see if a trivial query
(e.g. "SELECT 1") succeeds. However, that's problematic in the wake
of commit 11e9caff8, because now that we feed said query to psql
via stdin, we risk IPC::Run whining about a SIGPIPE failure if psql
quits before reading the query. Hence, we can't use a nonempty
query in cases where we need to wait for connection failures to
stop happening.
Per the precedent of commits c757a3da0 and 6d41dd045, we can pass
"undef" as the query in such cases to ensure that IPC::Run has
nothing to write. However, then we have to say that the expected
output is empty, and this exposes a deficiency in poll_query_until:
if psql fails altogether and returns empty stdout, poll_query_until
will treat that as a success! That's because, contrary to its
documentation, it makes no actual check for psql failure, looking
neither at the exit status nor at stderr.
To fix that, adjust poll_query_until to insist on empty stderr as
well as a stdout match. (I experimented with checking exit status
instead, but it seems that psql often does exit(1) in cases that we
need to consider successes. That might be something to fix someday,
but it would be a non-back-patchable behavior change.)
Back-patch to v10. The test cases needing this exist only as far
back as v11, but it seems wise to keep poll_query_until's behavior
the same in v10, in case we back-patch another such test case in
future. (9.6 does not currently need this change, because in that
branch poll_query_until can't be told to accept empty stdout as
a success case.)
Per assorted buildfarm failures, mostly on hoverfly.
Discussion: https://postgr.es/m/CAA4eK1+zM6L4QSA1XMvXY_qqWwdUmqkOS1+hWvL8QcYEBGA1Uw@mail.gmail.com
Previously, a zero value for the relfilenode resulted in
a confusing error message about "unexpected duplicate".
This function returns NULL for other invalid relfilenode
values, so zero should be treated likewise.
It's been like this all along, so back-patch to all supported
branches.
Justin Pryzby
Discussion: https://postgr.es/m/20210612023324.GT16435@telsasoft.com
Using an Assert to check the validity of incoming messages is an
extremely poor decision. In a debug build, it should not be that easy
for a broken or malicious remote client to crash the logrep worker.
The consequences could be even worse in non-debug builds, which will
fail to make such checks at all, leading to who-knows-what misbehavior.
Hence, promote every Assert that could possibly be triggered by wrong
or out-of-order replication messages to a full test-and-ereport.
To avoid bloating the set of messages the translation team has to cope
with, establish a policy that replication protocol violation error
reports don't need to be translated. Hence, all the new messages here
use errmsg_internal(). A couple of old messages are changed likewise
for consistency.
Along the way, fix some non-idiomatic or outright wrong uses of
hash_search().
Most of these mistakes are new with the "streaming replication"
patch (commit 464824323), but a couple go back a long way.
Back-patch as appropriate.
Discussion: https://postgr.es/m/1719083.1623351052@sss.pgh.pa.us
Commit caba8f0d43 wasn't quite right for msys, as demonstrated by
several buildfarm animals, including jacana and fairywren. We need to
use the msys perl in the archive command, but call it in such a way that
Windows will understand the path. Furthermore, inside the copy script we
need to convert a Windows path to an msys path.
ab55d74 has introduced some tests with rows found as missing in logical
replication subscriptions for partitioned tables, relying on a logic
with a lookup of the logs generated, scanning the whole file. This
commit makes the logic more precise, by scanning the logs only from the
position before the key queries are run to the position where we check
for the logs. This will reduce the risk of issues with log patterns
overlapping with each other if those tests get more complicated in the
future.
Per discussion with Tom Lane.
Discussion: https://postgr.es/m/YMP+Gx2S8meYYHW4@paquier.xyz
Backpatch-through: 13
This variable was present in the list added by 9d660670, but it is not
supported by this branch. Issue noticed while diving into a similar
change for pg_regress.c.
Backpatch-through: 9.6
We were already reporting it, but only after the parallel workers were
finished, which is visibly much later than what happens in a serial
build.
With this change we report it when the leader starts its own sort phase
when participating in the build (the normal case). Now this might
happen a little later than when the workers start their sorting phases,
but a) communicating the actual phase start from workers is likely to be
a hassle, and b) the sort phase start is pretty fuzzy anyway, since
sorting per se is actually initiated by tuplesort.c internally earlier
than tuplesort_performsort() is called.
Backpatch to pg12, where the progress reporting code for CREATE INDEX
went in.
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Greg Nancarrow <gregn4422@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/1128176d-1eee-55d4-37ca-e63644422adb
apply_handle_tuple_routing(), having detected and reported that
the tuple it needed to update didn't exist, tried to update that
tuple anyway, leading to a null-pointer dereference.
logicalrep_partition_open() failed to ensure that the
LogicalRepPartMapEntry it built for a partition was fully
independent of that for the partition root, leading to
trouble if the root entry was later freed or rebuilt.
Meanwhile, on the publisher's side, pgoutput_change() sometimes
attempted to apply execute_attr_map_tuple() to a NULL tuple.
The first of these was reported by Sergey Bernikov in bug #17055;
I found the other two while developing some test cases for this
sadly under-tested code.
Diagnosis and patch for the first issue by Amit Langote; patches
for the others by me; new test cases by me. Back-patch to v13
where this logic came in.
Discussion: https://postgr.es/m/17055-9ba800ec8522668b@postgresql.org
The code added to mark replication slots invalid in commit c655077639
had the race condition that a slot can be dropped or advanced
concurrently with checkpointer trying to invalidate it. Rewrite the
code to close those races.
The changes to ReplicationSlotAcquire's API added with c655077639 are
not necessary anymore. To avoid an ABI break in released branches, this
commit leaves that unchanged; it'll be changed in a master-only commit
separately.
Backpatch to 13, where this code first appeared.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20210408001037.wfmk6jud36auhfqm@alap3.anarazel.de
It turns out that worker.c's code path for TRUNCATE was also
careless about establishing a snapshot while executing user-defined
code, allowing the checks added by commit 84f5c2908 to fail when
a trigger is fired in that context.
We could just wrap Push/PopActiveSnapshot around the truncate call,
but it seems better to establish a policy of holding a snapshot
throughout execution of a replication step. To help with that and
possible future requirements, replace the previous ensure_transaction
calls with pairs of begin/end_replication_step calls.
Per report from Mark Dilger. Back-patch to v11, like the previous
changes.
Discussion: https://postgr.es/m/B4A3AF82-79ED-4F4C-A4E5-CD2622098972@enterprisedb.com
This only happens if (1) the new standby has no WAL available locally,
(2) the new standby is starting from the old timeline, (3) the promotion
happened in the WAL segment from which the new standby is starting,
(4) the timeline history file for the new timeline is available from
the archive but the WAL files for are not (i.e. this is a race),
(5) the WAL files for the new timeline are available via streaming,
and (6) recovery_target_timeline='latest'.
Commit ee994272ca introduced this
logic and was an improvement over the previous code, but it mishandled
this case. If recovery_target_timeline='latest' and restore_command is
set, validateRecoveryParameters() can change recoveryTargetTLI to be
different from receiveTLI. If streaming is then tried afterward,
expectedTLEs gets initialized with the history of the wrong timeline.
It's supposed to be a list of entries explaining how to get to the
target timeline, but in this case it ends up with a list of entries
explaining how to get to the new standby's original timeline, which
isn't right.
Dilip Kumar and Robert Haas, reviewed by Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CAFiTN-sE-jr=LB8jQuxeqikd-Ux+jHiXyh4YDiZMPedgQKup0g@mail.gmail.com
The set of subcommands supported by \dAp, \do and \dy was described
incorrectly in psql's --help. The documentation was already consistent
with the code.
Reported-by: inoas, from IRC
Author: Matthijs van der Vleuten
Reviewed-by: Neil Chen
Discussion: https://postgr.es/m/6a984e24-2171-4039-9050-92d55e7b23fe@www.fastmail.com
Backpatch-through: 9.6
Further thought about bug #17050 suggests that it's a good idea
to use CURSOR_OPT_NO_SCROLL for the implicit cursor opened by
a plpgsql FOR-over-query loop. This ensures that, if somebody
commits inside the loop, PersistHoldablePortal won't try to
rewind and re-read the cursor. While we'd have selected NO_SCROLL
anyway if FOR UPDATE/SHARE appears in the query, there are other
hazards with volatile functions; and in any case, it's silly to
expend effort storing rows that we know for certain won't be needed.
(While here, improve the comment in exec_run_select, which was a bit
confused about the rationale for when we can use parallel mode.
Cursor operations aren't a hazard for nameless portals.)
This wasn't an issue until v11, which introduced the possibility
of persisting such cursors. Hence, back-patch to v11.
Per bug #17050 from Алексей Булгаков.
Discussion: https://postgr.es/m/17050-f77aa827dc85247c@postgresql.org
PersistHoldablePortal has long assumed that it should store the
entire output of the query-to-be-persisted, which requires rewinding
and re-reading the output. This is problematic if the query is not
stable: we might get different row contents, or even a different
number of rows, which'd confuse the cursor state mightily.
In the case where the cursor is NO SCROLL, this is very easy to
solve: just store the remaining query output, without any rewinding,
and tweak the portal's cursor state to match. Aside from removing
the semantic problem, this could be significantly more efficient
than storing the whole output.
If the cursor is scrollable, there's not much we can do, but it
was already the case that scrolling a volatile query's result was
pretty unsafe. We can just document more clearly that getting
correct results from that is not guaranteed.
There are already prohibitions in place on using SCROLL with
FOR UPDATE/SHARE, which is one way for a SELECT query to have
non-stable results. We could imagine prohibiting SCROLL when
the query contains volatile functions, but that would be
expensive to enforce. Moreover, it could break applications
that work just fine, if they have functions that are in fact
stable but the user neglected to mark them so. So settle for
documenting the hazard.
While this problem has existed in some guise for a long time,
it got a lot worse in v11, which introduced the possibility
of persisting plpgsql cursors (perhaps implicit ones) even
when they violate the rules for what can be marked WITH HOLD.
Hence, I've chosen to back-patch to v11 but not further.
Per bug #17050 from Алексей Булгаков.
Discussion: https://postgr.es/m/17050-f77aa827dc85247c@postgresql.org
Mis-merge introduced by e2f21ff, where pgwin32_setenv() was listed but
not defined in win32env.c. This had no consequences as this routine
does not exist in this branch.
Only REL_12_STABLE and REL_13_STABLE got that wrong.
Backpatch-through: 12
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
The Msys shell mangles certain patterns in its command line, so avoid
handing arbitrary SQL to psql on the command line and instead use
IPC::Run's redirection facility for stdin. This pattern is already
mostly whats used, but query_poll_until() was not doing the right thing.
Problem discovered on the buildfarm when a new TAP test failed on msys.
The internal SQL queries used by REFRESH MATERIALIZED VIEW CONCURRENTLY
include some aliases for its diff and temporary relations with
rather-generic names: diff, newdata, newdata2 and mv. Depending on the
queries used for the materialized view, using CONCURRENTLY could lead to
some internal failures if the query and those internal aliases conflict.
Those names have been chosen in 841c29c8. This commit switches instead
to a naming pattern which is less likely going to cause conflicts, based
on an idea from Thomas Munro, by appending _$ to those aliases. This is
not perfect as those new names could still conflict, but at least it has
the advantage to keep the code readable and simple while reducing the
likelihood of conflicts to be close to zero.
Reported-by: Mathis Rudolf
Author: Bharath Rupireddy
Reviewed-by: Bernd Helmle, Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/109c267a-10d2-3c53-b60e-720fcf44d9e8@credativ.de
Backpatch-through: 9.6
Various environment variables were not getting reset in the TAP tests,
which would cause failures depending on the tests or the environment
variables involved. For example, PGSSL{MAX,MIN}PROTOCOLVERSION could
cause failures in the SSL tests. Even worse, a junk value of
PGCLIENTENCODING makes a server startup fail. The list of variables
reset is adjusted in each stable branch depending on what is supported.
While on it, simplify a bit the code per a suggestion from Andrew
Dunstan, using a list of variables instead of doing single deletions.
Reviewed-by: Andrew Dunstan, Daniel Gustafsson
Discussion: https://postgr.es/m/YLbjjRpucIeZ78VQ@paquier.xyz
Backpatch-through: 9.6
Commit 428b260f8 broke planning of cases where row marks are needed
(SELECT FOR UPDATE, etc) and one of the query's tables is a foreign
table that has regular table(s) as inheritance children. We got the
reverse case right, but apparently were thinking that foreign tables
couldn't be inheritance parents. Not so; so we need to be able to
add a CTID junk column while adding a new child, not only a wholerow
junk column.
Back-patch to v12 where the faulty code came in.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEmo3FV1LAQ4TVyS2h1WM=kMkZUmbNuZSCnfHvMcUcPeA@mail.gmail.com
This case should be disallowed, just as FOR UPDATE with a plain
GROUP BY is disallowed; FOR UPDATE only makes sense when each row
of the query result can be identified with a single table row.
However, we missed teaching CheckSelectLocking() to check
groupingSets as well as groupClause, so that it would allow
degenerate grouping sets. That resulted in a bad plan and
a null-pointer dereference in the executor.
Looking around for other instances of the same bug, the only one
I found was in examine_simple_variable(). That'd just lead to
silly estimates, but it should be fixed too.
Per private report from Yaoguang Chen.
Back-patch to all supported branches.
Release memory allocated when creating the tuple-conversion map and its
component TupleDescs when its owning sync entry is invalidated.
TupleDescs must also be freed when no map is deemed necessary, to begin
with.
Reported-by: Andres Freund
Author: Amit Langote
Reviewed-by: Takamichi Osumi, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/MEYP282MB166933B1AB02B4FE56E82453B64D9@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
This fixes the code compilation on Windows with MSVC and Kerberos, as
a missing implementation of setenv() causes a compilation failure of the
GSSAPI code. This was only reproducible when building the code with
Kerberos, something that buildfarm animal hamerkop has fixed recently.
This issue only happens on 12 and 13, as this code has been introduced
in b0b39f7. HEAD is already able to compile properly thanks to
7ca37fb0, and this commit is a minimal cherry-pick of it.
Thanks to Tom Lane for the discussion.
Discussion: https://postgr.es/m/YLDtm5WGjPxm6ua4@paquier.xyz
Backpatch-through: 12
create_projection_plan contains a hidden assumption (here made
explicit by an Assert) that a projection-capable Path will yield a
projection-capable Plan. Unfortunately, that assumption is violated
only a few lines away, by create_projection_plan itself. This means
that two stacked ProjectionPaths can yield an outcome where we try to
jam the upper path's tlist into a non-projection-capable child node,
resulting in an invalid plan.
There isn't any good reason to have stacked ProjectionPaths; indeed the
whole concept is faulty, since the set of Vars/Aggs/etc needed by the
upper one wouldn't necessarily be available in the output of the lower
one, nor could the lower one create such values if they weren't
available from its input. Hence, we can fix this by adjusting
create_projection_path to strip any top-level ProjectionPath from the
subpath it's given. (This amounts to saying "oh, we changed our
minds about what we need to project here".)
The test case added here only fails in v13 and HEAD; before that, we
don't attempt to shove the Sort into the parallel part of the plan,
for reasons that aren't entirely clear to me. However, all the
directly-related code looks generally the same as far back as v11,
where the hazard was introduced (by d7c19e62a). So I've got no faith
that the same type of bug doesn't exist in v11 and v12, given the
right test case. Hence, back-patch the code changes, but not the
irrelevant test case, into those branches.
Per report from Bas Poot.
Discussion: https://postgr.es/m/534fca83789c4a378c7de379e9067d4f@politie.nl
Parallel query processes that called BlessTupleDesc() for identical
tuple descriptors at the same moment could crash. There was code to
handle that rare case, but it dereferenced a bogus DSA pointer. Repair.
Back-patch to 11, where commit cc5f8136 added support for sharing tuple
descriptors in parallel queries.
Reported-by: Eric Thinnes <e.thinnes@gmx.de>
Discussion: https://postgr.es/m/99aaa2eb-e194-bf07-c29a-1a76b4f2bcf9%40gmx.de
The deliverables of upstream Kerberos on Windows are installed with
paths that do not match our MSVC scripts. First, the include folder was
named "inc/" in our scripts, but the upstream MSIs use "include/".
Second, the build would fail with 64-bit environments as the libraries
are named differently.
This commit adjusts the MSVC scripts to be compatible with the latest
installations of upstream, and I have checked that the compilation was
able to work with the 32-bit and 64-bit installations.
Special thanks to Kondo Yuta for the help in investigating the situation
in hamerkop, which had an incorrect configuration for the GSS
compilation.
Reported-by: Brian Ye
Discussion: https://postgr.es/m/162128202219.27274.12616756784952017465@wrigleys.postgresql.org
Backpatch-through: 9.6
The error messages, docs, and one of the options were using
'parallel degree' to indicate parallelism used by vacuum command. We
normally use 'parallel workers' at other places so change it for parallel
vacuum accordingly.
Author: Bharath Rupireddy
Reviewed-by: Dilip Kumar, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CALj2ACWz=PYrrFXVsEKb9J1aiX4raA+UBe02hdRp_zqDkrWUiw@mail.gmail.com
SSL renegotiation is already disabled as of 48d23c72, however this does
not prevent the server to comply with a client willing to use
renegotiation. In the last couple of years, renegotiation had its set
of security issues and flaws (like the recent CVE-2021-3449), and it
could be possible to crash the backend with a client attempting
renegotiation.
This commit takes one extra step by disabling renegotiation in the
backend in the same way as SSL compression (f9264d15) or tickets
(97d3a0b0). OpenSSL 1.1.0h has added an option named
SSL_OP_NO_RENEGOTIATION able to achieve that. In older versions
there is an option called SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS that
was undocumented, and could be set within the SSL object created when
the TLS connection opens, but I have decided not to use it, as it feels
trickier to rely on, and it is not official. Note that this option is
not usable in OpenSSL < 1.1.0h as the internal contents of the *SSL
object are hidden to applications.
SSL renegotiation concerns protocols up to TLSv1.2.
Per original report from Robert Haas, with a patch based on a suggestion
by Andres Freund.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/YKZBXx7RhU74FlTE@paquier.xyz
Backpatch-through: 9.6
If we redirected a replicated tuple operation into a partition child
table, and then tried to fire AFTER triggers for that event, the
relation cache entry for the child table was already closed. This has
no visible ill effects as long as the entry is still there and still
valid, but an unluckily-timed cache flush could result in a crash or
other misbehavior.
To fix, postpone the ExecCleanupTupleRouting call (which is what
closes the child table) until after we've fired triggers. This
requires a bit of refactoring so that the cleanup function can
have access to the necessary state.
In HEAD, I took the opportunity to simplify some of worker.c's
function APIs based on use of the new ApplyExecutionData struct.
However, it doesn't seem safe/practical to back-patch that aspect,
at least not without a lot of analysis of possible interactions
with a04daa97a.
In passing, add an Assert to afterTriggerInvokeEvents to catch
such cases. This seems worthwhile because we've grown a number
of fairly unstructured ways of calling AfterTriggerEndQuery.
Back-patch to v13, where worker.c grew the ability to deal with
partitioned target tables.
Discussion: https://postgr.es/m/3382681.1621381328@sss.pgh.pa.us
This was previously allowed, but I think that was just an oversight.
It's a clear violation of the rule that a generated column cannot
depend on itself or other generated columns. Moreover, because the
code was relying on the assumption that no such cross-references
exist, it was pretty easy to crash ALTER TABLE and perhaps other
places. Even if you managed not to crash, you got quite unstable,
implementation-dependent results.
Per report from Vitaly Ustinov.
Back-patch to v12 where GENERATED came in.
Discussion: https://postgr.es/m/CAM_DEiWR2DPT6U4xb-Ehigozzd3n3G37ZB1+867zbsEVtYoJww@mail.gmail.com
We consider this supported (though I've got my doubts that it's a
good idea, because tableoid is not immutable). However, several
code paths failed to fill the field in soon enough, causing such
a GENERATED expression to see zero or the wrong value. This
occurred when ALTER TABLE adds a new GENERATED column to a table
with existing rows, and during regular INSERT or UPDATE on a
foreign table with GENERATED columns.
Noted during investigation of a report from Vitaly Ustinov.
Back-patch to v12 where GENERATED came in.
Discussion: https://postgr.es/m/CAM_DEiWR2DPT6U4xb-Ehigozzd3n3G37ZB1+867zbsEVtYoJww@mail.gmail.com
COMMIT/ROLLBACK necessarily destroys all snapshots within the session.
The original implementation of intra-procedure transactions just
cavalierly did that, ignoring the fact that this left us executing in
a rather different environment than normal. In particular, it turns
out that handling of toasted datums depends rather critically on there
being an outer ActiveSnapshot: otherwise, when SPI or the core
executor pop whatever snapshot they used and return, it's unsafe to
dereference any toasted datums that may appear in the query result.
It's possible to demonstrate "no known snapshots" and "missing chunk
number N for toast value" errors as a result of this oversight.
Historically this outer snapshot has been held by the Portal code,
and that seems like a good plan to preserve. So add infrastructure
to pquery.c to allow re-establishing the Portal-owned snapshot if it's
not there anymore, and add enough bookkeeping support that we can tell
whether it is or not.
We can't, however, just re-establish the Portal snapshot as part of
COMMIT/ROLLBACK. As in normal transaction start, acquiring the first
snapshot should wait until after SET and LOCK commands. Hence, teach
spi.c about doing this at the right time. (Note that this patch
doesn't fix the problem for any PLs that try to run intra-procedure
transactions without using SPI to execute SQL commands.)
This makes SPI's no_snapshots parameter rather a misnomer, so in HEAD,
rename that to allow_nonatomic.
replication/logical/worker.c also needs some fixes, because it wasn't
careful to hold a snapshot open around AFTER trigger execution.
That code doesn't use a Portal, which I suspect someday we're gonna
have to fix. But for now, just rearrange the order of operations.
This includes back-patching the recent addition of finish_estate()
to centralize the cleanup logic there.
This also back-patches commit 2ecfeda3e into v13, to improve the
test coverage for worker.c (it was that test that exposed that
worker.c's snapshot management is wrong).
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
While applying the truncate change, the logical apply worker acquires
RowExclusiveLock on the relation being truncated. This allowed truncate on
the relation at a time by two apply workers which lead to a deadlock. The
reason was that one of the workers after updating the pg_class tuple tries
to acquire SHARE lock on the relation and started to wait for the second
worker which has acquired RowExclusiveLock on the relation. And when the
second worker tries to update the pg_class tuple, it starts to wait for
the first worker which leads to a deadlock. Fix it by acquiring
AccessExclusiveLock on the relation before applying the truncate change as
we do for normal truncate operation.
Author: Peter Smith, test case by Haiying Tang
Reviewed-by: Dilip Kumar, Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/CAHut+PsNm43p0jM+idTvWwiGZPcP0hGrHMPK9TOAkc+a4UpUqw@mail.gmail.com
exec_for_query() normally tries to prefetch a few rows at a time
from the query being iterated over, so as to reduce executor
entry/exit overhead. Unfortunately this is unsafe if we have
COMMIT or ROLLBACK within the loop, because there might be
TOAST references in the data that we prefetched but haven't
yet examined. Immediately after the COMMIT/ROLLBACK, we have
no snapshots in the session, meaning that VACUUM is at liberty
to remove recently-deleted TOAST rows.
This was originally reported as a case triggering the "no known
snapshots" error in init_toast_snapshot(), but even if you miss
hitting that, you can get "missing toast chunk", as illustrated
by the added isolation test case.
To fix, just disable prefetching in non-atomic contexts. Maybe
there will be performance complaints prompting us to work harder
later, but it's not clear at the moment that this really costs
much, and I doubt we'd want to back-patch any complicated fix.
In passing, adjust that error message in init_toast_snapshot()
to be a little clearer about the likely cause of the problem.
Patch by me, based on earlier investigation by Konstantin Knizhnik.
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
"typename" is a C++ keyword, so pg_upgrade.h fails to compile in C++.
Fortunately, there seems no likely reason for somebody to need to
do that. Nonetheless, it's project policy that all .h files should
pass cpluspluscheck, so rename the argument to fix that.
Oversight in 57c081de0; back-patch as that was. (The policy requiring
pg_upgrade.h to pass cpluspluscheck only goes back to v12, but it
seems best to keep this code looking the same in all branches.)
ForgetBackgroundWorker lacked any memory barrier at all, while
BackgroundWorkerStateChange had one but unaccountably did
additional manipulation of the slot after the barrier. AFAICS,
the rule must be that the barrier is immediately before setting
or clearing slot->in_use.
It looks like back in 9.6 when ForgetBackgroundWorker was first
written, there might have been some case for not needing a
barrier there, but I'm not very convinced of that --- the fact
that the load of bgw_notify_pid is in the caller doesn't seem
to guarantee no memory ordering problem. So patch 9.6 too.
It's likely that this doesn't fix any observable bug on Intel
hardware, but machines with weaker memory ordering rules could
have problems here.
Discussion: https://postgr.es/m/4046084.1620244003@sss.pgh.pa.us
Add a defensive "can't happen" error to code that handles nbtree posting
list splits (promote an existing assertion). This avoids a segfault in
the event of an insertion of a newitem that is somehow identical to an
existing non-pivot tuple in the index. An nbtree index should never
have two index tuples with identical TIDs.
This scenario is not particular unlikely in the event of any kind of
corruption that leaves the index in an inconsistent state relative to
the heap relation that is indexed. There are two known reports of
preventable hard crashes. Doing nothing seems unacceptable given the
general expectation that nbtree will cope reasonably well with corrupt
data.
Discussion: https://postgr.es/m/CAH2-Wz=Jr_d-dOYEEmwz0-ifojVNWho01eAqewfQXgKfoe114w@mail.gmail.com
Backpatch: 13-, where nbtree deduplication was introduced.
Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab4), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done. At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.
To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step. Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains. Therefore, allow
up to 10 cycles without additional savings before throwing an
error. (Perhaps this number will need adjustment, but it seems
quite generous right now.)
As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes. We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things. (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Knowing that a buggy opclass could cause an infinite insertion loop,
spgdoinsert() intended to allow its loop to be interrupted by query
cancel. However, that never actually worked, because in iterations
after the first, we'd be holding buffer lock(s) which would cause
InterruptHoldoffCount to be positive, preventing servicing of the
interrupt.
To fix, check if an interrupt is pending, and if so fall out of
the insertion loop and service the interrupt after we've released
the buffers. If it was indeed a query cancel, that's the end of
the matter. If it was a non-canceling interrupt reason, make use
of the existing provision to retry the whole insertion. (This isn't
as wasteful as it might seem, since any upper-level index tuples we
already created should be usable in the next attempt.)
While there's no known instance of such a bug in existing release
branches, it still seems like a good idea to back-patch this to
all supported branches, since the behavior is fairly nasty if a
loop does happen --- not only is it uncancelable, but it will
quickly consume memory to the point of an OOM failure. In any
case, this code is certainly not working as intended.
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Split up CHECK_FOR_INTERRUPTS() to provide an additional macro
INTERRUPTS_PENDING_CONDITION(), which just tests whether an
interrupt is pending without attempting to service it. This is
useful in situations where the caller knows that interrupts are
blocked, and would like to find out if it's worth the trouble
to unblock them.
Also add INTERRUPTS_CAN_BE_PROCESSED(), which indicates whether
CHECK_FOR_INTERRUPTS() can be relied on to clear the pending interrupt.
This commit doesn't actually add any uses of the new macros,
but a follow-on bug fix will do so. Back-patch to all supported
branches to provide infrastructure for that fix.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/20210513155351.GA7848@alvherre.pgsql
The worker.c global wrconn is only meant to be used by logical apply/
tablesync workers, but there are other variables with the same name. To
reduce future confusion rename the global from "wrconn" to
"LogRepWorkerWalRcvConn".
While this is just cosmetic, it seems better to backpatch it all the way
back to 10 where this code appeared, to avoid future backpatching
issues.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
Several queries in the privileges regression test cause the planner
to apply the plpgsql function "leak()" to every element of the
histogram for atest12.b. Since commit 0c882e52a increased the size
of that histogram to 10000 entries, the test invokes that function
over 100000 times, which takes an absolutely unreasonable amount of
time in clobber-cache-always mode.
However, there's no real reason why that has to be a plpgsql
function: for the purposes of this test, all that matters is that
it not be marked leakproof. So we can replace the plpgsql
implementation with a direct call of int4lt, which has the same
behavior and is orders of magnitude faster. This is expected to
cut several hours off the buildfarm cycle time for CCA animals.
It has some positive impact in normal builds too, though that's
probably lost in the noise.
Back-patch to v13 where 0c882e52a came in.
Discussion: https://postgr.es/m/575884.1620626638@sss.pgh.pa.us
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
While we were (mostly) careful about ensuring that the dimensions of
arrays aren't large enough to cause integer overflow, the lower bound
values were generally not checked. This allows situations where
lower_bound + dimension overflows an integer. It seems that that's
harmless so far as array reading is concerned, except that array
elements with subscripts notionally exceeding INT_MAX are inaccessible.
However, it confuses various array-assignment logic, resulting in a
potential for memory stomps.
Fix by adding checks that array lower bounds aren't large enough to
cause lower_bound + dimension to overflow. (Note: this results in
disallowing cases where the last subscript position would be exactly
INT_MAX. In principle we could probably allow that, but there's a lot
of code that computes lower_bound + dimension and would need adjustment.
It seems doubtful that it's worth the trouble/risk to allow it.)
Somewhat independently of that, array_set_element() was careless
about possible overflow when checking the subscript of a fixed-length
array, creating a different route to memory stomps. Fix that too.
Security: CVE-2021-32027
When building without --enable-dtrace, emit dummy
do {} while (0)
statements for the stubbed-out TRACE_POSTGRESQL_foo() macros
instead of empty macros that totally elide the original probe
statement.
This fixes the
warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
introduced by b94409a02f.
Author: Craig Ringer <craig.ringer@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/20210504221531.cfvpmmdfsou6eitb%40alap3.anarazel.de
This patch replaces use of the global "wrconn" variable in
AlterSubscription_refresh with a local variable of the same name, making
it consistent with other functions in subscriptioncmds.c (e.g.
DropSubscription).
The global wrconn is only meant to be used for logical apply/tablesync worker.
Abusing it this way is known to cause trouble if an apply worker
manages to do a subscription refresh, such as reported by Jeremy Finzel
and diagnosed by Andres Freund back in November 2020, at
https://www.postgresql.org/message-id/20201111215820.qihhrz7fayu6myfi@alap3.anarazel.de
Backpatch to 10. In branch master, also move the connection establishment
to occur outside the PG_TRY block; this way we can remove a test for NULL in
PG_FINALLY, and it also makes the code more consistent with similar code in
the same file.
Author: Peter Smith <peter.b.smith@fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
When ALTER TABLE .. ALTER CONSTRAINT changes deferrability properties
changed in a partitioned table, we failed to propagate those changes
correctly to partitions and to triggers. Repair by adding a recursion
mechanism to affect all derived constraints and all derived triggers.
(In particular, recurse to partitions even if their respective parents
are already in the desired state: it is possible for the partitions to
have been altered individually.) Because foreign keys involve tables in
two sides, we cannot use the standard ALTER TABLE recursion mechanism,
so we invent our own by following pg_constraint.conparentid down.
When ALTER TABLE .. ALTER CONSTRAINT is invoked on the derived
pg_constraint object that's automaticaly created in a partition as a
result of a constraint added to its parent, raise an error instead of
pretending to work and then failing to modify all the affected triggers.
Before this commit such a command would be allowed but failed to affect
all triggers, so it would silently misbehave. (Restoring dumps of
existing databases is not affected, because pg_dump does not produce
anything for such a derived constraint anyway.)
Add some tests for the case.
Backpatch to 11, where foreign key support was added to partitioned
tables by commit 3de241dba8. (A related change is commit f56f8f8da6
in pg12 which added support for FKs *referencing* partitioned tables;
this is what forces us to use an ad-hoc recursion mechanism for this.)
Diagnosed by Tom Lane from bug report from Ron L Johnson. As of this
writing, no reviews were offered.
Discussion: https://postgr.es/m/75fe0761-a291-86a9-c8d8-4906da077469@gmail.com
Discussion: https://postgr.es/m/3144850.1607369633@sss.pgh.pa.us
The OID of the constraint is used instead of the OID of the trigger --
an easy mistake to make. Apparently the object-alter hooks are not very
well tested :-(
Backpatch to 12, where this typo was introduced by 578b229718
Discussion: https://postgr.es/m/20210503231633.GA6994@alvherre.pgsql
When running ALTER TABLE t2 INHERIT t1, we must check that columns in
t2 that correspond to a generated column in t1 are also generated and
have the same generation expression. Otherwise, this would allow
creating setups that a normal CREATE TABLE sequence would not allow.
Discussion: https://www.postgresql.org/message-id/22de27f6-7096-8d96-4619-7b882932ca25@2ndquadrant.com
If dtrace is compiled in but disabled, the lwlock dtrace probes still
evaluate their arguments. Since PostgreSQL 13, T_NAME(lock) does
nontrivial work, so it should be avoided if not needed. To fix, make
these calls conditional on the *_ENABLED() macro corresponding to each
probe.
Reviewed-by: Craig Ringer <craig.ringer@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/CAGRY4nwxKUS_RvXFW-ugrZBYxPFFM5kjwKT5O+0+Stuga5b4+Q@mail.gmail.com
Reject aggregates, window functions, and procedures. Aggregates
failed anyway, though with a somewhat obscure error message.
Window functions would hit an Assert or null-pointer dereference.
Procedures seemed to work as long as you didn't try to do
transaction control, but (a) transaction control is sort of the
point of a procedure, and (b) it's not entirely clear that no
bugs lurk in that path. Given the lack of testing of this area,
it seems safest to be conservative in what we support.
Also reject proretset functions, as the fastpath protocol can't
support returning a set.
Also remove an easily-triggered assertion that the given OID
isn't 0; the subsequent lookups can handle that case themselves.
Per report from Theodor-Arsenij Larionov-Trichkin.
Back-patch to all supported branches. (The procedure angle
only applies in v11+, of course.)
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
Commits 29aeda6e4 et al closed up some oversights involving not checking
for non-upgradable types within container types, such as arrays and
ranges. However, I only looked at version.c, failing to notice that
there were substantially-equivalent tests in check.c. (The division
of responsibility between those files is less than clear...)
In addition, because genbki.pl does not guarantee that auto-generated
rowtype OIDs will hold still across versions, we need to consider that
the composite type associated with a system catalog or view is
non-upgradable. It seems unlikely that someone would have a user
column declared that way, but if they did, trying to read it in another
PG version would likely draw "no such pg_type OID" failures, thanks
to the type OID embedded in composite Datums.
To support the composite and reg*-type cases, extend the recursive
query that does the search to allow any base query that returns
a column of pg_type OIDs, rather than limiting it to exactly one
starting type.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/2798740.1619622555@sss.pgh.pa.us
Attempting to use this function with event triggers failed, as, since
its introduction in a676201, this code has never associated an object
name with event triggers. This addresses the failure by adding the
event trigger name to the set defining its object address.
Note that regression tests are added within event_trigger and not
object_address to avoid issues with concurrent connections in parallel
schedules.
Author: Joel Jacobson
Discussion: https://postgr.es/m/3c905e77-a026-46ae-8835-c3f6cd1d24c8@www.fastmail.com
Backpatch-through: 9.6
Adopt a more consistent policy about what slot-type-specific
getsysattr functions should do when system attributes are not
available. To wit, they should all throw the same user-oriented
error, rather than variously crashing or emitting developer-oriented
messages.
This closes a identifiable problem in commits a71cfc56b and
3fb93103a (in v13 and v12), so back-patch into those branches,
along with a test case to try to ensure we don't break it again.
It is not known that any of the former crash cases are reachable
in HEAD, but this seems like a good safety improvement in any case.
Discussion: https://postgr.es/m/141051591267657@mail.yandex.ru
If the source and destination partitions don't have identical
rowtypes (for example, one has dropped columns the other lacks),
then the planSlot contents will be different because of that.
If the query has a RETURNING list that tries to return resjunk
columns out of the planSlot, that is columns from tables that
were joined to the target table, we'd get errors or wrong answers.
That's because we used the RETURNING list generated for the
destination partition, which expects a planSlot matching that
partition's subplan.
The most practical fix seems to be to convert the updated destination
tuple back to the source partition's rowtype, and then apply the
RETURNING list generated for the source partition. This avoids making
fragile assumptions about whether the per-subpartition subplans
generated all the resjunk columns in the same order.
This has been broken since v11 introduced cross-partition UPDATE.
The lack of field complaints shows that non-identical partitions
aren't a common case; therefore, don't stress too hard about
making the conversion efficient.
There's no such bug in HEAD, because commit 86dc90056 got rid of
per-target-relation variance in the contents of the planSlot.
Hence, patch v11-v13 only.
Amit Langote and Etsuro Fujita, small changes by me
Discussion: https://postgr.es/m/CA+HiwqE_UK1jTSNrjb8mpTdivzd3dum6mK--xqKq0Y9VmfwWQA@mail.gmail.com
An oversight introduced by the incremental-sort patches caused
"could not find pathkey item to sort" errors in some situations
where a sort key involves an aggregate or window function.
The basic problem here is that find_em_expr_usable_for_sorting_rel
isn't properly modeling what prepare_sort_from_pathkeys will do
later. Rather than hoping we can keep those functions in sync,
let's refactor so that they actually share the code for
identifying a suitable sort expression.
With this refactoring, tlist.c's tlist_member_ignore_relabel
is unused. I removed it in HEAD but left it in place in v13,
in case any extensions are using it.
Per report from Luc Vlaming. Back-patch to v13 where the
problem arose.
James Coleman and Tom Lane
Discussion: https://postgr.es/m/91f3ec99-85a4-fa55-ea74-33f85a5c651f@swarm64.com
In order to avoid getting old logfile contents certain functions in
PostgresNode were doing one of two things. On Windows it rotated the
logfile and restarted the server, while elsewhere it truncated the log
file. Both of these are unnecessary. We borrow from the buildfarm which
does this instead: note the size of the logfile before we start, and
then when fetching the logfile skip to that position before accumulating
contents. This is spelled differently on Windows but the effect is the
same. This is largely centralized in TestLib's slurp_file function,
which has a new optional parameter, the offset to skip to before
starting to reading the file. Code in the client becomes much neater.
Backpatch to all live branches.
Michael Paquier, slightly modified by me.
Discussion: https://postgr.es/m/YHajnhcMAI3++pJL@paquier.xyz
Most GUC check hooks that inspect database state have special checks
that prevent them from throwing hard errors for state-dependent issues
when source == PGC_S_TEST. This allows, for example,
"ALTER DATABASE d SET default_text_search_config = foo" when the "foo"
configuration hasn't been created yet. Without this, we have problems
during dump/reload or pg_upgrade, because pg_dump has no idea about
possible dependencies of GUC values and can't ensure a safe restore
ordering.
However, check_role() and check_session_authorization() hadn't gotten
the memo about that, and would throw hard errors anyway. It's not
entirely clear what is the use-case for "ALTER ROLE x SET role = y",
but we've now heard two independent complaints about that bollixing
an upgrade, so apparently some people are doing it.
Hence, fix these two functions to act more like other check hooks
with similar needs. (But I did not change their insistence on
being inside a transaction, as it's still not apparent that setting
either GUC from the configuration file would be wise.)
Also fix check_temp_buffers, which had a different form of the disease
of making state-dependent checks without any exception for PGC_S_TEST.
A cursory survey of other GUC check hooks did not find any more issues
of this ilk. (There are a lot of interdependencies among
PGC_POSTMASTER and PGC_SIGHUP GUCs, which may be a bad idea, but
they're not relevant to the immediate concern because they can't be
set via ALTER ROLE/DATABASE.)
Per reports from Charlie Hornsby and Nathan Bossart. Back-patch
to all supported branches.
Discussion: https://postgr.es/m/HE1P189MB0523B31598B0C772C908088DB7709@HE1P189MB0523.EURP189.PROD.OUTLOOK.COM
Discussion: https://postgr.es/m/20160711223641.1426.86096@wrigleys.postgresql.org
Previously, get_cached_rowtype() cached a pointer to a reference-counted
tuple descriptor from the typcache, relying on the ExprContextCallback
mechanism to release the tupdesc refcount when the expression tree
using the tupdesc was destroyed. This worked fine when it was designed,
but the introduction of within-DO-block COMMITs broke it. The refcount
is logged in a transaction-lifespan resource owner, but plpgsql won't
destroy simple expressions made within the DO block (before its first
commit) until the DO block is exited. That results in a warning about
a leaked tupdesc refcount when the COMMIT destroys the original resource
owner, and then an error about the active resource owner not holding a
matching refcount when the expression is destroyed.
To fix, get rid of the need to have a shutdown callback at all, by
instead caching a pointer to the relevant typcache entry. Those
survive for the life of the backend, so we needn't worry about the
pointer becoming stale. (For registered RECORD types, we can still
cache a pointer to the tupdesc, knowing that it won't change for the
life of the backend.) This mechanism has been in use in plpgsql
and expandedrecord.c since commit 4b93f5799, and seems to work well.
This change requires modifying the ExprEvalStep structs used by the
relevant expression step types, which is slightly worrisome for
back-patching. However, there seems no good reason for extensions
to be familiar with the details of these particular sub-structs.
Per report from Rohit Bhogate. Back-patch to v11 where within-DO-block
COMMITs became a thing.
Discussion: https://postgr.es/m/CAAV6ZkQRCVBh8qAY+SZiHnz+U+FqAGBBDaDTjF2yiKa2nJSLKg@mail.gmail.com
heap_update needs to clear any existing "all visible" flag on
the old tuple's page (and on the new page too, if different).
Per coding rules, to do this it must acquire pin on the appropriate
visibility-map page while not holding exclusive buffer lock;
which creates a race condition since someone else could set the
flag whenever we're not holding the buffer lock. The code is
supposed to handle that by re-checking the flag after acquiring
buffer lock and retrying if it became set. However, one code
path through heap_update itself, as well as one in its subroutine
RelationGetBufferForTuple, failed to do this. The end result,
in the unlikely event that a concurrent VACUUM did set the flag
while we're transiently not holding lock, is a non-recurring
"PANIC: wrong buffer passed to visibilitymap_clear" failure.
This has been seen a few times in the buildfarm since recent VACUUM
changes that added code paths that could set the all-visible flag
while holding only exclusive buffer lock. Previously, the flag
was (usually?) set only after doing LockBufferForCleanup, which
would insist on buffer pin count zero, thus preventing the flag
from becoming set partway through heap_update. However, it's
clear that it's heap_update not VACUUM that's at fault here.
What's less clear is whether there is any hazard from these bugs
in released branches. heap_update is certainly violating API
expectations, but if there is no code path that can set all-visible
without a cleanup lock then it's only a latent bug. That's not
100% certain though, besides which we should worry about extensions
or future back-patch fixes that could introduce such code paths.
I chose to back-patch to v12. Fixing RelationGetBufferForTuple
before that would require also back-patching portions of older
fixes (notably 0d1fe9f74), which is more code churn than seems
prudent to fix a hypothetical issue.
Discussion: https://postgr.es/m/2247102.1618008027@sss.pgh.pa.us