In PM_WAIT_DEAD_END state, checkpointer process must be dead already.
But an immediate shutdown could make postmaster's state machine
transition to PM_WAIT_DEAD_END state even if checkpointer process is
still running, and which caused assertion failure. This bug was introduced
in commit 457d6cf049.
This patch ensures that postmaster's state machine doesn't transition to
PM_WAIT_DEAD_END state in an immediate shutdown while checkpointer
process is running.
Previously one had to use slist_delete(), implying an additional scan of
the list, making this infrastructure considerably less efficient than
traditional Lists when deletion of element(s) in a long list is needed.
Modify the slist_foreach_modify() macro to support deleting the current
element in O(1) time, by keeping a "prev" pointer in addition to "cur"
and "next". Although this makes iteration with this macro a bit slower,
no real harm is done, since in any scenario where you're not going to
delete the current list element you might as well just use slist_foreach
instead. Improve the comments about when to use each macro.
Back-patch to 9.3 so that we'll have consistent semantics in all branches
that provide ilist.h. Note this is an ABI break for callers of
slist_foreach_modify().
Andres Freund and Tom Lane
Per discussion on pgsql-hackers, these aren't really needed. Interim
versions of the background worker patch had the worker starting with
signals already unblocked, which would have made this necessary.
But the final version does not, so we don't really need it; and it
doesn't work well with the new facility for starting dynamic background
workers, so just rip it out.
Also per discussion on pgsql-hackers, back-patch this change to 9.3.
It's best to get the API break out of the way before we do an
official release of this facility, to avoid more pain for extension
authors later.
There is a new API, RegisterDynamicBackgroundWorker, which allows
an ordinary user backend to register a new background writer during
normal running. This means that it's no longer necessary for all
background workers to be registered during processing of
shared_preload_libraries, although the option of registering workers
at that time remains available.
When a background worker exits and will not be restarted, the
slot previously used by that background worker is automatically
released and becomes available for reuse. Slots used by background
workers that are configured for automatic restart can't (yet) be
released without shutting down the system.
This commit adds a new source file, bgworker.c, and moves some
of the existing control logic for background workers there.
Previously, there was little enough logic that it made sense to
keep everything in postmaster.c, but not any more.
This commit also makes the worker_spi contrib module into an
extension and adds a new function, worker_spi_launch, which can
be used to demonstrate the new facility.
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
In patch 82233ce7ea, AbortStartTime wasn't being reset appropriately
after the restart sequence, causing subsequent iterations through
ServerLoop to malfunction.
On immediate shutdown, or during a restart-after-crash sequence,
postmaster used to send SIGQUIT (and then abandon ship if shutdown); but
this is not a good strategy if backends don't die because of that
signal. (This might happen, for example, if a backend gets tangled
trying to malloc() due to gettext(), as in an example illustrated by
MauMau.) This causes problems when later trying to restart the server,
because some processes are still attached to the shared memory segment.
Instead of just abandoning such backends to their fates, we now have
postmaster hang around for a little while longer, send a SIGKILL after
some reasonable waiting period, and then exit. This makes immediate
shutdown more reliable.
There is disagreement on whether it's best for postmaster to exit after
sending SIGKILL, or to stick around until all children have reported
death. If this controversy is resolved differently than what this patch
implements, it's an easy change to make.
Bug reported by MauMau in message 20DAEA8949EC4E2289C6E8E58560DEC0@maumau
MauMau and Álvaro Herrera
Latch activity was not being detected by non-database-connected workers; the
SIGUSR1 signal handler which is normally in charge of that was set to SIG_IGN.
Create a simple handler to call latch_sigusr1_handler instead.
Robert Haas (bug report and suggested fix)
Add a SignalUnconnectedWorkers() call so that non-database-connected background
workers are also notified when postmaster is SIGHUPped. Previously, only
database-connected workers were.
Michael Paquier (bug report and fix)
An oversight in commit e710b65c1c allowed
database names beginning with "-" to be treated as though they were secure
command-line switches; and this switch processing occurs before client
authentication, so that even an unprivileged remote attacker could exploit
the bug, needing only connectivity to the postmaster's port. Assorted
exploits for this are possible, some requiring a valid database login,
some not. The worst known problem is that the "-r" switch can be invoked
to redirect the process's stderr output, so that subsequent error messages
will be appended to any file the server can write. This can for example be
used to corrupt the server's configuration files, so that it will fail when
next restarted. Complete destruction of database tables is also possible.
Fix by keeping the database name extracted from a startup packet fully
separate from command-line switches, as had already been done with the
user name field.
The Postgres project thanks Mitsumasa Kondo for discovering this bug,
Kyotaro Horiguchi for drafting the fix, and Noah Misch for recognizing
the full extent of the danger.
Security: CVE-2013-1899
Commit da07a1e8 was broken for EXEC_BACKEND because I failed to realize
that the MaxBackends recomputation needed to be duplicated by
subprocesses in SubPostmasterMain. However, instead of having the value
be recomputed at all, it's better to assign the correct value at
postmaster initialization time, and have it be propagated to exec'ed
backends via BackendParameters.
MaxBackends stays as zero until after modules in
shared_preload_libraries have had a chance to register bgworkers, since
the value is going to be untrustworthy till that's finished.
Heikki Linnakangas and Álvaro Herrera
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
Background workers are postmaster subprocesses that run arbitrary
user-specified code. They can request shared memory access as well as
backend database connections; or they can just use plain libpq frontend
database connections.
Modules listed in shared_preload_libraries can register background
workers in their _PG_init() function; this is early enough that it's not
necessary to provide an extra GUC option, because the necessary extra
resources can be allocated early on. Modules can install more than one
bgworker, if necessary.
Care is taken that these extra processes do not interfere with other
postmaster tasks: only one such process is started on each ServerLoop
iteration. This means a large number of them could be waiting to be
started up and postmaster is still able to quickly service external
connection requests. Also, shutdown sequence should not be impacted by
a worker process that's reasonably well behaved (i.e. promptly responds
to termination signals.)
The current implementation lets worker processes specify their start
time, i.e. at what point in the server startup process they are to be
started: right after postmaster start (in which case they mustn't ask
for shared memory access), when consistent state has been reached
(useful during recovery in a HOT standby server), or when recovery has
terminated (i.e. when normal backends are allowed).
In case of a bgworker crash, actions to take depend on registration
data: if shared memory was requested, then all other connections are
taken down (as well as other bgworkers), just like it were a regular
backend crashing. The bgworker itself is restarted, too, within a
configurable timeframe (which can be configured to be never).
More features to add to this framework can be imagined without much
effort, and have been discussed, but this seems good enough as a useful
unit already.
An elementary sample module is supplied.
Author: Álvaro Herrera
This patch is loosely based on prior patches submitted by KaiGai Kohei,
and unsubmitted code by Simon Riggs.
Reviewed by: KaiGai Kohei, Markus Wanner, Andres Freund,
Heikki Linnakangas, Simon Riggs, Amit Kapila
Once we've received a shutdown signal (SIGINT or SIGTERM), we should not
launch any more child processes, even if we get signals requesting such.
The normal code path for spawning backends has always understood that,
but the postmaster's infrastructure for hot standby and autovacuum didn't
get the memo. As reported by Hari Babu in bug #7643, this could lead to
failure to shut down at all in some cases, such as when SIGINT is received
just before the startup process sends PMSIGNAL_RECOVERY_STARTED: we'd
launch a bgwriter and checkpointer, and then those processes would have no
idea that they ought to quit. Similarly, launching a new autovacuum worker
would result in waiting till it finished before shutting down.
Also, switch the order of the code blocks in reaper() that detect startup
process crash versus shutdown termination. Once we've sent it a signal,
we should not consider that exit(1) is surprising. This is just a cosmetic
fix since shutdown occurs correctly anyway, but better not to log a phony
complaint about startup process crash.
Back-patch to 9.0. Some parts of this might be applicable before that,
but given the lack of prior complaints I'm not going to worry too much
about older branches.
dlist_delete, dlist_insert_after, dlist_insert_before, slist_insert_after
do not need access to the list header, and indeed insisting on that negates
one of the main advantages of a doubly-linked list.
In consequence, revert addition of "cache_bucket" field to CatCTup.
Provide a common implementation of embedded singly-linked and
doubly-linked lists. "Embedded" in the sense that the nodes'
next/previous pointers exist within some larger struct; this design
choice reduces memory allocation overhead.
Most of the implementation uses inlineable functions (where supported),
for performance.
Some existing uses of both types of lists have been converted to the new
code, for demonstration purposes. Other uses can (and probably will) be
converted in the future. Since dllist.c is unused after this conversion,
it has been removed.
Author: Andres Freund
Some tweaks by me
Reviewed by Tom Lane, Peter Geoghegan
Our getnameinfo() replacement implementation in getaddrinfo.c failed
unless NI_NUMERICHOST and NI_NUMERICSERV were given as flags, because
it doesn't resolve host names, only numeric IPs. But per standard,
when those flags are not given, an implementation can still degrade to
not returning host names, so this restriction is unnecessary. When we
remove it, we can eliminate some code in postmaster.c that apparently
tried to work around that.
Similar changes were done to pg_hba.conf earlier already, this commit makes
pg_ident.conf to behave the same as pg_hba.conf.
This has two user-visible effects. First, if pg_ident.conf contains multiple
errors, the whole file is parsed at postmaster startup time and all the
errors are immediately reported. Before this patch, the file was parsed and
the errors were reported only when someone tries to connect using an
authentication method that uses the file, and the parsing stopped on first
error. Second, if you SIGHUP to reload the config files, and the new
pg_ident.conf file contains an error, the error is logged but the old file
stays in effect.
Also, regular expressions in pg_ident.conf are now compiled only once when
the file is loaded, rather than every time the a user is authenticated. That
should speed up authentication if you have a lot of regexps in the file.
Amit Kapila
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
Should be limited to the maximum number of connections excluding
autovacuum workers, not including.
Add similar check for max_wal_senders, which should never be higher than
max_connections.
In the original coding of the log rotation stuff, we did not bother to make
the truncation logic work for the very first rotation after postmaster
start (or after a syslogger crash and restart). It just always appended
in that case. It did not seem terribly important at the time, but we've
recently had two separate complaints from people who expected it to work
unsurprisingly. (Both users tend to restart the postmaster about as often
as a log rotation is configured to happen, which is maybe not typical use,
but still...) Since the initial log file is opened in the postmaster,
fixing this requires passing down some more state to the syslogger child
process.
It's always been like this, so back-patch to all supported branches.
Management of timeouts was getting a little cumbersome; what we
originally had was more than enough back when we were only concerned
about deadlocks and query cancel; however, when we added timeouts for
standby processes, the code got considerably messier. Since there are
plans to add more complex timeouts, this seems a good time to introduce
a central timeout handling module.
External modules register their timeout handlers during process
initialization, and later enable and disable them as they see fit using
a simple API; timeout.c is in charge of keeping track of which timeouts
are in effect at any time, installing a common SIGALRM signal handler,
and calling setitimer() as appropriate to ensure timely firing of
external handlers.
timeout.c additionally supports pluggable modules to add their own
timeouts, though this capability isn't exercised anywhere yet.
Additionally, as of this commit, walsender processes are aware of
timeouts; we had a preexisting bug there that made those ignore SIGALRM,
thus being subject to unhandled deadlocks, particularly during the
authentication phase. This has already been fixed in back branches in
commit 0bf8eb2a, which see for more details.
Main author: Zoltán Böszörményi
Some review and cleanup by Álvaro Herrera
Extensive reworking by Tom Lane
All Unix-oid platforms that we currently support should have waitpid(),
since it's in V2 of the Single Unix Spec. Our git history shows that
the wait3 code was added to support NextStep, which we officially dropped
support for as of 9.2. So get rid of the configure test, and simplify the
macro spaghetti in reaper(). Per suggestion from Fujii Masao.
There was a wild mix of calling conventions: Some were declared to
return void and didn't return, some returned an int exit code, some
claimed to return an exit code, which the callers checked, but
actually never returned, and so on.
Now all of these functions are declared to return void and decorated
with attribute noreturn and don't return. That's easiest, and most
code already worked that way.
There is no reason to do this as early as possible in postmaster startup,
and good reason not to do it until we have completely created the
postmaster's lock file, namely that it might contribute to pg_ctl thinking
that postmaster startup has timed out. (This would require a rather
unusual amount of time to be spent scanning temp file directories, but we
have at least one field report of it happening reproducibly.)
Back-patch to 9.1. Before that, pg_ctl didn't wait for additional info to
be added to the lock file, so it wasn't a problem.
Note that this is not a complete fix to the slow-start issue in 9.1,
because we still had identify_system_timezone being run during postmaster
start in 9.1. But that's at least a reasonably well-defined delay, with
an easy workaround if needed, whereas the temp-files scan is not so
predictable and cannot be avoided.
We used to only initialize the stack base pointer when starting up a regular
backend, not in other processes. In particular, autovacuum workers can run
arbitrary user code, and without stack-depth checking, infinite recursion
in e.g an index expression will bring down the whole cluster.
The comment about PL/Java using set_stack_base() is not yet true. As the
code stands, PL/java still modifies the stack_base_ptr variable directly.
However, it's been discussed in the PL/Java mailing list that it should be
changed to use the function, because PL/Java is currently oblivious to the
register stack used on Itanium. There's another issues with PL/Java, namely
that the stack base pointer it sets is not really the base of the stack, it
could be something close to the bottom of the stack. That's a separate issue
that might need some further changes to this code, but that's a different
story.
Backpatch to all supported releases.
Postmaster sets max_safe_fds by testing how many open file descriptors it
can open, and that is normally inherited by all child processes at fork().
Not so on EXEC_BACKEND, ie. Windows, however. Because of that, we
effectively ignored max_files_per_process on Windows, and always assumed
a conservative default of 32 simultaneous open files. That could have an
impact on performance, if you need to access a lot of different files
in a query. After this patch, the value is passed to child processes by
save/restore_backend_variables() among many other global variables.
It has been like this forever, but given the lack of complaints about it,
I'm not backpatching this.
The postmaster was coded to treat any unexpected exit of the startup
process (i.e., the WAL replay process) as a catastrophic crash, and not try
to restart it. This was OK so long as the startup process could not have
any sibling postmaster children. However, if a hot-standby backend
crashes, we SIGQUIT the startup process along with everything else, and the
resulting exit is hardly "unexpected". Treating it as such meant we failed
to restart a standby server after any child crash at all, not only a crash
of the WAL replay process as intended. Adjust that. Back-patch to 9.0
where hot standby was introduced.
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
This speeds up snapshot-taking and reduces ProcArrayLock contention.
Also, the PGPROC (and PGXACT) structures used by two-phase commit are
now allocated as part of the main array, rather than in a separate
array, and we keep ProcArray sorted in pointer order. These changes
are intended to minimize the number of cache lines that must be pulled
in to take a snapshot, and testing shows a substantial increase in
performance on both read and write workloads at high concurrencies.
Pavan Deolasee, Heikki Linnakangas, Robert Haas
bgwriter is now a much less important process, responsible for page
cleaning duties only. checkpointer is now responsible for checkpoints
and so has a key role in shutdown. Later patches will correct doc
references to the now old idea that bgwriter performs checkpoints.
Has beneficial effect on performance at high write rates, but mainly
refactoring to more easily allow changes for power reduction by
simplifying previously tortuous code around required to allow page
cleaning and checkpointing to time slice in the same process.
Patch by me, Review by Dickson Guedes
Avoid possibly dumping core when pgstat_track_activity_query_size has a
less-than-default value; avoid uselessly searching for the query string
of a successfully-exited backend; don't bother putting out an ERRDETAIL if
we don't have a query to show; some other minor stylistic improvements.
To avoid minimize risk inside the postmaster, we subject this feature
to a number of significant limitations. We very much wish to avoid
doing any complex processing inside the postmaster, due to the
posssibility that the crashed backend has completely corrupted shared
memory. To that end, no encoding conversion is done; instead, we just
replace anything that doesn't look like an ASCII character with a
question mark. We limit the amount of data copied to 1024 characters,
and carefully sanity check the source of that data. While these
restrictions would doubtless be unacceptable in a general-purpose
logging facility, even this limited facility seems like an improvement
over the status quo ante.
Marti Raudsepp, reviewed by PDXPUG and myself
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
Adds additional test for active walsenders and closes a race
condition for when we failover when a new walsender was connecting.
Reported and fixed bu Fujii Masao. Review by Heikki Linnakangas
Standby servers can now have WALSender processes, which can work with
either WALReceiver or archive_commands to pass data. Fully updated
docs, including new conceptual terms of sending server, upstream and
downstream servers. WALSenders terminated when promote to master.
Fujii Masao, review, rework and doc rewrite by Simon Riggs
When an AccessShareLock, RowShareLock, or RowExclusiveLock is requested
on an unshared database relation, and we can verify that no conflicting
locks can possibly be present, record the lock in a per-backend queue,
stored within the PGPROC, rather than in the primary lock table. This
eliminates a great deal of contention on the lock manager LWLocks.
This patch also refactors the interface between GetLockStatusData() and
pg_lock_status() to be a bit more abstract, so that we don't rely so
heavily on the lock manager's internal representation details. The new
fast path lock structures don't have a LOCK or PROCLOCK structure to
return, so we mustn't depend on that for purposes of listing outstanding
locks.
Review by Jeff Davis.
detect postmaster death. Postmaster keeps the write-end of the pipe open,
so when it dies, children get EOF in the read-end. That can conveniently
be waited for in select(), which allows eliminating some of the polling
loops that check for postmaster death. This patch doesn't yet change all
the loops to use the new mechanism, expect a follow-on patch to do that.
This changes the interface to WaitLatch, so that it takes as argument a
bitmask of events that it waits for. Possible events are latch set, timeout,
postmaster death, and socket becoming readable or writeable.
The pipe method behaves slightly differently from the kill() method
previously used in PostmasterIsAlive() in the case that postmaster has died,
but its parent has not yet read its exit code with waitpid(). The pipe
returns EOF as soon as the process dies, but kill() continues to return
true until waitpid() has been called (IOW while the process is a zombie).
Because of that, change PostmasterIsAlive() to use the pipe too, otherwise
WaitLatch() would return immediately with WL_POSTMASTER_DEATH, while
PostmasterIsAlive() would claim it's still alive. That could easily lead to
busy-waiting while postmaster is in zombie state.
Peter Geoghegan with further changes by me, reviewed by Fujii Masao and
Florian Pflug.
postmaster.log", or nohup.
There was a small issue with LINUX_OOM_ADJ and silent_mode, namely that with
silent_mode the postmaster process incorrectly used the OOM settings meant
for backend processes. We certainly could've fixed that directly, but since
silent_mode was redundant anyway, we might as well just remove it.
This option turns off autovacuum, prevents non-super-user connections,
and enables oid setting hooks in the backend. The code continues to use
the old autoavacuum disable settings for servers with earlier catalog
versions.
This includes a catalog version bump to identify servers that support
the -b option.
If a smart shutdown occurs just as a child is starting up, and the
child subsequently becomes a walsender, there is a race condition:
the postmaster might count the exstant backends, determine that there
is one normal backend, and wait for it to die off. Had the walsender
transition already occurred before the postmaster counted, it would
have proceeded with the shutdown.
To fix this, have each child that transforms into a walsender kick
the postmaster just after doing so, so that the state machine is
certain to advance.
Fujii Masao
This is no longer necessary, and might result in a situation where the
configuration file is reloaded (and everything seems OK) but a subsequent
restart of the database fails.
Per an observation from Fujii Masao.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
The previous coding treated anything that wasn't an autovacuum launcher
as a normal backend, which is wrong now that we also have WAL senders.
Fujii Masao, reviewed by Robert Haas, Alvaro Herrera, Tom Lane,
and Bernd Helmle.
Fix broken test for pre-existing postmaster, caused by wrong code for
appending lines to the lockfile; don't write a failed listen_address
setting into the lockfile; don't arbitrarily change the location of the
data directory in the lockfile compared to previous releases; provide more
consistent and useful definitions of the socket path and listen_address
entries; avoid assuming that pg_ctl has the same DEFAULT_PGSOCKET_DIR as
the postmaster; assorted code style improvements.
We don't actually need optreset, because we can easily fix the code to
ensure that it's cleanly restartable after having completed a scan over the
argv array; which is the only case we need to restart in. Getting rid of
it avoids a class of interactions with the system libraries and allows
reversion of my change of yesterday in postmaster.c and postgres.c.
Back-patch to 8.4. Before that the getopt code was a bit different anyway.
The mingw people don't appear to care about compatibility with non-GNU
versions of getopt, so force use of our own copy of getopt on Windows.
Also, ensure that we make use of optreset when using our own copy.
Per report from Andrew Dunstan. Back-patch to all versions supported
on Windows.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
The handle to the shared memory segment containing startup
parameters was sent as 32-bit even on 64-bit systems. Since
HANDLEs appear to be allocated sequentially this shouldn't
be a problem until we reach 2^32 open handles in the postmaster,
but a 64-bit value should be sent across as 64-bit, and not
zero out the top 32 bits.
Noted by Tom Lane.
We must not return any "okay to proceed" result code without having checked
for too many children, else we might fail later on when trying to add the
new child to one of the per-child state arrays. It's not clear whether
this oversight explains Stefan Kaltenbrunner's recent report, but it could
certainly produce a similar symptom.
Back-patch to 8.4; the logic was not broken before that.
since it can happen when a process fails to start when the system
is under high load.
Per several bug reports and many peoples investigation.
Back-patch to 8.4, which is as far back as the "deadman-switch"
for shared memory access exists.
Normally, we automatically restart after a backend crash, but in some
cases when PostgreSQL is invoked by clusterware it may be desirable to
suppress this behavior, so we provide an option which does this.
Since no existing GUC group quite fits, create a new group called
"error handling options" for this and the previously undocumented GUC
exit_on_error, which is now documented.
Review by Fujii Masao.
In particular, it's bad to start walreceiver when in state
PM_WAIT_BACKENDS, because we have no provision to kill walreceiver
when in that state.
Fujii Masao
1. If we receive a fast shutdown request while in the PM_STARTUP state,
process it just as we would in PM_RECOVERY, PM_HOT_STANDBY, or PM_RUN.
Without this change, an early fast shutdown followed by Hot Standby causes
the database to get stuck in a state where a shutdown is pending (so no new
connections are allowed) but the shutdown request is never processed unless
we end Hot Standby and enter normal running.
2. Avoid removing the backup label file when a smart or fast shutdown occurs
during recovery. It makes sense to do this once we've reached normal running,
since we must be taking a backup which now won't be valid. But during
recovery we must be recovering from a previously taken backup, and any backup
label file is needed to restart recovery from the right place.
Fujii Masao and Robert Haas
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
At present, killing the startup process does not release any locks it holds,
so we must wait to stop the startup and walreceiver processes until all
read-only backends have exited. Without this patch, the startup and
walreceiver processes never exit, so the server gets permanently stuck in
a half-shutdown state.
Fujii Masao, with review, docs, and comment adjustments by me.
restore_command, if the connection to the primary server is lost. This
ensures that the standby can recover automatically, if the connection is
lost for a long time and standby falls behind so much that the required
WAL segments have been archived and deleted in the master.
This also makes standby_mode useful without streaming replication; the
server will keep retrying restore_command every few seconds until the
trigger file is found. That's the same basic functionality pg_standby
offers, but without the bells and whistles.
To implement that, refactor the ReadRecord/FetchRecord functions. The
FetchRecord() function introduced in the original streaming replication
patch is removed, and all the retry logic is now in a new function called
XLogReadPage(). XLogReadPage() is now responsible for executing
restore_command, launching walreceiver, and waiting for new WAL to arrive
from primary, as required.
This also changes the life cycle of walreceiver. When launched, it now only
tries to connect to the master once, and exits if the connection fails, or
is lost during streaming for any reason. The startup process detects the
death, and re-launches walreceiver if necessary.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
This silences some warnings on Win64. Not using the proper SOCKET datatype
was actually wrong on Win32 as well, but didn't cause any warnings there.
Also create define PGINVALID_SOCKET to indicate an invalid/non-existing
socket, instead of using a hardcoded -1 value.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
build actually attempts to advertise itself via Bonjour. Formerly it always
did so, which meant that packagers had to decide for their users whether
this behavior was wanted or not. The default is "off" to be on the safe
side, though this represents a change in the default behavior of a
Bonjour-enabled build. Per discussion.
with the not-so-deprecated DNSServiceRegister. This patch shouldn't change
any user-visible behavior, it just gets rid of a deprecation warning in
--with-bonjour builds. The new code will fail on OS X releases before 10.3,
but it seems unlikely that anyone will want to run Postgres 8.5 on 10.2.
via the "flat files" facility. This requires making it enough like a backend
to be able to run transactions; it's no longer an "auxiliary process" but
more like the autovacuum worker processes. Also, its signal handling has
to be brought into line with backends/workers. In particular, since it
now has to handle procsignal.c processing, the special autovac-launcher-only
signal conditions are moved to SIGUSR2.
Alvaro, with some cleanup from Tom
(That flat file is now completely useless, but removal will come later.)
To do this, postpone client authentication into the startup transaction
that's run by InitPostgres. We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before. The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle. (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)
A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.
Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication. This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead. However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.
PostgresMain switch. In point of fact, FrontendProtocol is already set
in a backend process, since ProcessStartupPacket() is executed inside
the backend --- it hasn't been run by the postmaster for many years.
And if it were, we'd still certainly want FrontendProtocol to be set before
we get as far as PostgresMain, so that startup errors get reported in the
right protocol.
-v might have some future use in standalone backends, so I didn't go so
far as to remove the switch outright.
Also, initialize FrontendProtocol to 0 not PG_PROTOCOL_LATEST. The only
likely result of presetting it like that is to mask failure-to-set-it
mistakes.
Instead of sending stdout/stderr to /dev/null after forking away from the
terminal, send them to postmaster.log within the data directory. Since
this opens the door to indefinite logfile bloat, recommend even more
strongly that log output be redirected when using silent_mode.
Move the postmaster's initial calls of load_hba() and load_ident() down
to after we have started the log collector, if we are going to. This
is so that errors reported by them will appear in the "usual" place.
Reclassify silent_mode as a LOGGING_WHERE, not LOGGING_WHEN, parameter,
since it's got absolutely nothing to do with the latter category.
In passing, fix some obsolete references to -S ... this option hasn't
had that switch letter for a long time.
Back-patch to 8.4, since as of 8.4 load_hba() and load_ident() are more
picky (and thus more likely to fail) than they used to be. This entire
change was driven by a complaint about those errors disappearing into
the bit bucket.
This causes problems when the system load is high, per report from Zdenek
Kotala in <1250860954.1239.114.camel@localhost>; instead of calling kill
directly, have the signal handler set a flag which is checked in ServerLoop.
This way, the handler can return before being called again by a subsequent
signal sent from the autovacuum launcher. Also, increase the sleep in the
launcher in this failure path to 1 second.
Backpatch to 8.3, which is when the signalling between autovacuum
launcher/postmaster was introduced.
Also, add a couple of ReleasePostmasterChildSlot calls in error paths; this
part backpatched to 8.4 which is when the child slot stuff was introduced.
if a smart shutdown is already in progress. Backpatch to 8.3, this was broken
in the patch that introduced "dead-end backends".
Per report by Itagaki Takahiro, patch by Fujii Masao.
that memory allocated by starting third party DLLs doesn't end up
conflicting with it.
Hopefully this solves the long-time issue with "could not reattach
to shared memory" errors on Win32.
Patch from Tsutomu Yamada and me, based on idea from Trevor Talbot.
LC_CTYPE settings to children via BackendParameters. Per discussion,
the postmaster is now just using system defaults anyway, so we might as
well save a few cycles during backend startup.
archive recovery. Invent a separate state variable and inquiry function
for XLogInsertAllowed() to clarify some tests and make the management of
writing the end-of-recovery checkpoint less klugy. Fix several places
that were incorrectly testing InRecovery when they should be looking at
RecoveryInProgress or XLogInsertAllowed (because they will now be executed
in the bgwriter not startup process). Clarify handling of bad LSNs passed
to XLogFlush during recovery. Use a spinlock for setting/testing
SharedRecoveryInProgress. Improve quite a lot of comments.
Heikki and Tom
a backend has done exit(0) or exit(1) without having disengaged itself
from shared memory. We are at risk for this whenever third-party code is
loaded into a backend, since such code might not know it's supposed to go
through proc_exit() instead. Also, it is reported that under Windows
there are ways to externally kill a process that cause the status code
returned to the postmaster to be indistinguishable from a voluntary exit
(thank you, Microsoft). If this does happen then the system is probably
hosed --- for instance, the dead session might still be holding locks.
So the best recovery method is to treat this like a backend crash.
The dead man switch is armed for a particular child process when it
acquires a regular PGPROC, and disarmed when the PGPROC is released;
these should be the first and last touches of shared memory resources
in a backend, or close enough anyway. This choice means there is no
coverage for auxiliary processes, but I doubt we need that, since they
shouldn't be executing any user-provided code anyway.
This patch also improves the management of the EXEC_BACKEND
ShmemBackendArray array a bit, by reducing search costs.
Although this problem is of long standing, the lack of field complaints
seems to mean it's not critical enough to risk back-patching; at least
not till we get some more testing of this mechanism.
error message if the installation directory layout is messed up (or at least,
something more useful than the behavior exhibited in bug #4787). During
postmaster startup, check that get_pkglib_path resolves as a readable
directory; and if ParseTzFile() fails to open the expected timezone
abbreviation file, check the possibility that the directory is missing rather
than just the specified file. In case of either failure, issue a hint
suggesting that the installation is broken. These two checks cover the lib/
and share/ trees of a full installation, which should take care of most
scenarios where a sysadmin decides to get cute.
are using our own ports of getopt or getopt_long, those will define
the variable for themselves; and if not, we don't need these, because
we never touch the variable anyway.
recovery: if background writer or pgstat process dies during recovery (or
any other child process, but those two are the only ones running), send
SIGQUIT to the startup process using correct pid.
its usual buffer cleaning duties during archive recovery, and it's responsible
for performing restartpoints.
This requires some changes in postmaster. When the startup process has done
all the initialization and is ready to start WAL redo, it signals the
postmaster to launch the background writer. The postmaster is signaled again
when the point in recovery is reached where we know that the database is in
consistent state. Postmaster isn't interested in that at the moment, but
that's the point where we could let other backends in to perform read-only
queries. The postmaster is signaled third time when the recovery has ended,
so that postmaster knows that it's safe to start accepting connections.
The startup process now traps SIGTERM, and performs a "clean" shutdown. If
you do a fast shutdown during recovery, a shutdown restartpoint is performed,
like a shutdown checkpoint, and postmaster kills the processes cleanly. You
still have to continue the recovery at next startup, though.
Currently, the background writer is only launched during archive recovery.
We could launch it during crash recovery as well, but it seems better to keep
that codepath as simple as possible, for the sake of robustness. And it
couldn't do any restartpoints during crash recovery anyway, so it wouldn't be
that useful.
log_restartpoints is gone. Use log_checkpoints instead. This is yet to be
documented.
This whole operation is a pre-requisite for Hot Standby, but has some value of
its own whether the hot standby patch makes 8.4 or not.
Simon Riggs, with lots of modifications by me.
initialization, to give loadable modules a reasonable place to perform
creation of any shared memory areas they need. This is the logical conclusion
of our previous creation of RequestAddinShmemSpace() and RequestAddinLWLocks().
We don't need an explicit shmem_shutdown_hook, because the existing
on_shmem_exit and on_proc_exit mechanisms serve that need.
Also, adjust SubPostmasterMain so that libraries that got loaded into the
postmaster will be loaded into all child processes, not only regular backends.
This improves consistency with the non-EXEC_BACKEND behavior, and might be
necessary for functionality for some types of add-ons.
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
each connection. This makes it possible to catch errors in the pg_hba
file when it's being reloaded, instead of silently reloading a broken
file and failing only when a user tries to connect.
This patch also makes the "sameuser" argument to ident authentication
optional.
unnecessary cache resets. The major changes are:
* When the queue overflows, we only issue a cache reset to the specific
backend or backends that still haven't read the oldest message, rather
than resetting everyone as in the original coding.
* When we observe backend(s) falling well behind, we signal SIGUSR1
to only one backend, the one that is furthest behind and doesn't already
have a signal outstanding for it. When it finishes catching up, it will
in turn signal SIGUSR1 to the next-furthest-back guy, if there is one that
is far enough behind to justify a signal. The PMSIGNAL_WAKEN_CHILDREN
mechanism is removed.
* We don't attempt to clean out dead messages after every message-receipt
operation; rather, we do it on the insertion side, and only when the queue
fullness passes certain thresholds.
* Split SInvalLock into SInvalReadLock and SInvalWriteLock so that readers
don't block writers nor vice versa (except during the infrequent queue
cleanout operations).
* Transfer multiple sinval messages for each acquisition of a read or
write lock.
do CancelBackup at a sane place, fix some oversights in the state transitions,
allow only superusers to connect while we are waiting for backup mode to end.
have pg_ctl warn about this.
Cancel running online backups (by renaming the backup_label file,
thus rendering the backup useless) when shutting down in fast mode.
Laurenz Albe
key files that are similar to the one for the postmaster's data directory
permissions check. (I chose to standardize on that one since it's the most
heavily used and presumably best-wordsmithed by now.) Also eliminate explicit
tests on file ownership in these places, since the ensuing read attempt must
fail anyway if it's wrong, and there seems no value in issuing the same error
message for distinct problems. (But I left in the explicit ownership test in
postmaster.c, since it had its own error message anyway.) Also be more
specific in the documentation's descriptions of these checks. Per a gripe
from Kevin Hunter.
With the addition of multiple autovacuum workers, our choices were to delete
the check, document the interaction with autovacuum_max_workers, or complicate
the check to try to hide that interaction. Since this restriction has never
been adequate to ensure backends can't run out of pinnable buffers, it doesn't
really have enough excuse to live to justify the second or third choices.
Per discussion of a complaint from Andreas Kling (see also bug #3888).
This commit also removes several documentation references to this restriction,
but I'm not sure I got them all.
finish archiving everything (when there's no error), and to eliminate various
hazards as best we can. This fixes a previous 8.3 patch that caused the
postmaster to kill and then restart the archiver during shutdown (!?).
The new behavior is that the archiver is allowed to run unmolested until
the bgwriter has exited; then it is sent SIGUSR2 to tell it to do a final
archiving cycle and quit. We only SIGQUIT the archiver if we want a panic
stop; this is important since SIGQUIT will also be sent to any active
archive_command. The postmaster also now doesn't SIGQUIT the stats collector
until the bgwriter is done, since the bgwriter can send stats messages in 8.3.
The postmaster will not exit until both the archiver and stats collector are
gone; this provides some defense (not too bulletproof) against conflicting
archiver or stats collector processes being started by a new postmaster
instance. We continue the prior practice that the archiver will check
for postmaster death immediately before issuing any archive_command; that
gives some additional protection against conflicting archivers.
Also, modify the archiver process to notice SIGTERM and refuse to issue any
more archive commands if it gets it. The postmaster doesn't ever send it
SIGTERM; we assume that any such signal came from init and is a notice of
impending whole-system shutdown. In this situation it seems imprudent to try
to start new archive commands --- if they aren't extremely quick they're
likely to get SIGKILL'd by init.
All per discussion.
childprocess deaths instead of using one thread per child. This drastastically
reduces the address space usage and should allow for more backends running.
Also change the win32_waitpid functionality to use an IO Completion Port for
queueing child death notices instead of using a fixed-size array.
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
constant flow of new connection requests could prevent the postmaster from
completing a shutdown or crash restart. This is done by labeling child
processes that are "dead ends", that is, we know that they were launched only
to tell a client that it can't connect. These processes are managed
separately so that they don't confuse us into thinking that we can't advance
to the next stage of a shutdown or restart sequence, until the very end
where we must wait for them to drain out so we can delete the shmem segment.
Per discussion of a misbehavior reported by Keaton Adams.
Since this code was baroque already, and my first attempt at fixing the
problem made it entirely impenetrable, I took the opportunity to rewrite it
in a state-machine style. That eliminates some duplicated code sections and
hopefully makes everything a bit clearer.
as well as regular backends: if no regular backend launches before the autovac
launcher tries to start an autovac worker, the postmaster would get an Assert
fault due to calling PostmasterRandom before random_seed was initialized.
Cleanest solution seems to be to take the initialization of random_seed out
of ServerLoop and let PostmasterRandom do it for itself.
not bothering to initialize is_autovacuum for regular backends, meaning there
was a significant chance of the postmaster prematurely sending them SIGTERM
during database shutdown. Also, leaving the cancel key unset for an autovac
worker meant that any client could send it SIGINT, which doesn't sound
especially good either.
so that we will be able to create a cookie for all processes for CSVlogs.
It is set wherever MyProcPid is set. Take the opportunity to remove the now
unnecessary session-only restriction on the %s and %c escapes in log_line_prefix.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
against a Unix server, and Windows-specific server-side authentication
using SSPI "negotiate" method (Kerberos or NTLM).
Only builds properly with MSVC for now.
for it to die before telling the bgwriter to initiate shutdown checkpoint.
Since it's connected to shared memory, this seems more prudent than the
alternative of letting it quit asynchronously. Resolves my complaint
of yesterday about repeated shutdown checkpoints in CVS HEAD.
continue with the schedule. Change current uses of SIGINT to abort a worker
into SIGTERM, which keeps the old behaviour of terminating the process.
Patch from ITAGAKI Takahiro, with some editorializing of my own.
by having the postmaster signal it when certain failures occur. This requires
the postmaster setting a flag in shared memory, but should be as safe as the
pmsignal.c code is.
Also make sure the launcher honor's a postgresql.conf change turning it off
on SIGHUP.
o read global SSL configuration file
o add GUC "ssl_ciphers" to control allowed ciphers
o add libpq environment variable PGSSLKEY to control SSL hardware keys
Victor B. Wagner
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
socket is still read-ready, the code was a tight loop, wasting lots of CPU.
We can't do anything to clear the failure, other than wait, but we should give
other processes more chance to finish and release FDs; so insert a small sleep.
Also, avoid bogus "close(-1)" in this case. Per report from Jim Nasby.
"database system is ready to accept connections", which is issued by the
postmaster when it really is ready to accept connections. Per proposal from
Markus Schiltknecht and subsequent discussion.
accessing it, like DROP DATABASE. This allows the regression tests to pass
with autovacuum enabled, which open the gates for finally enabling autovacuum
by default.
an optarg). Add some comments noting that code in three different files has
to be kept in sync. Fix erroneous description of -S switch (it sets work_mem
not silent_mode), and do some light copy-editing elsewhere in postgres-ref.
StartupXLOG and ShutdownXLOG no longer need to be critical sections, because
in all contexts where they are invoked, elog(ERROR) would be translated to
elog(FATAL) anyway. (One change in bgwriter.c is needed to make this true:
set ExitOnAnyError before trying to exit. This is a good fix anyway since
the existing code would have gone into an infinite loop on elog(ERROR) during
shutdown.) That avoids a misleading report of PANIC during semi-orderly
failures. Modify the postmaster to include the startup process in the set of
processes that get SIGTERM when a fast shutdown is requested, and also fix it
to not try to restart the bgwriter if the bgwriter fails while trying to write
the shutdown checkpoint. Net result is that "pg_ctl stop -m fast" does
something reasonable for a system in warm standby mode, and so should Unix
system shutdown (ie, universal SIGTERM). Per gripe from Stephen Harris and
some corner-case testing of my own.
Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
promoted to FATAL) end in exit(1) not exit(0). Then change the postmaster to
allow exit(1) without a system-wide panic, but not for the startup subprocess
or the bgwriter. There were a couple of places that were using exit(1) to
deliberately force a system-wide panic; adjust these to be exit(2) instead.
This fixes the problem noted back in July that if the startup process exits
with elog(ERROR), the postmaster would think everything is hunky-dory and
proceed to start up. Alternative solutions such as trying to run the entire
startup process as a critical section seem less clean, primarily because of
the fact that a fair amount of startup code is shared by all postmaster
children in the EXEC_BACKEND case. We'd need an ugly special case somewhere
near the head of main.c to make it work if it's the child process's
responsibility to determine what happens; and what's the point when the
postmaster already treats different children differently?
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
such as debugging and performance measurement. This consists of two features:
a table of "rendezvous variables" that allows separately-loaded shared
libraries to communicate, and a new GUC setting "local_preload_libraries"
that allows libraries to be loaded into specific sessions without explicit
cooperation from the client application. To make local_preload_libraries
as flexible as possible, we do not restrict its use to superusers; instead,
it is restricted to load only libraries stored in $libdir/plugins/. The
existing LOAD command has also been modified to allow non-superusers to
LOAD libraries stored in this directory.
This patch also renames the existing GUC variable preload_libraries to
shared_preload_libraries (after a suggestion by Simon Riggs) and does some
code refactoring in dfmgr.c to improve clarity.
Korry Douglas, with a little help from Tom Lane.
loaded libraries: call functions _PG_init() and _PG_fini() if the library
defines such symbols. Hence we no longer need to specify an initialization
function in preload_libraries: we can assume that the library used the
_PG_init() convention, instead. This removes one source of pilot error
in use of preloaded libraries. Original patch by Ralf Engelschall,
preload_libraries changes by me.
it's handled just about like timezone; in particular, don't try
to read anything during InitializeGUCOptions. Should solve current
startup failure on Windows, and avoid wasted cycles if a nondefault
setting is specified in postgresql.conf too. Possibly we need to
think about a more general solution for handling 'expensive to set'
GUC options.
EINTR; the stats code was failing to do this and so were a couple of places
in the postmaster. The stats code assumed that recv() could not return EINTR
if a preceding select() showed the socket to be read-ready, but this is
demonstrably false with our Windows implementation of recv(), and it may
not be the case on all Unix variants either. I think this explains the
intermittent stats regression test failures we've been seeing, as well
as reports of stats collector instability under high load on Windows.
Backpatch as far as 8.0.
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
be delivered directly to the collector process. The extra process context
swaps required to transfer data through the buffer process seem to outweigh
any value the buffering might have. Per recent discussion and tests.
I modified Bruce's draft patch to use poll() rather than select() where
available (this makes a noticeable difference on my system), and fixed
up the EXEC_BACKEND case.
changing semantics too much. statement_timestamp is now set immediately
upon receipt of a client command message, and the various places that used
to do their own gettimeofday() calls to mark command startup are referenced
to that instead. I have also made stats_command_string use that same
value for pg_stat_activity.query_start for both the command itself and
its eventual replacement by <IDLE> or <idle in transaction>. There was
some debate about that, but no argument that seemed convincing enough to
justify an extra gettimeofday() call.
current commands; instead, store current-status information in shared
memory. This substantially reduces the overhead of stats_command_string
and also ensures that pg_stat_activity is fully up to date at all times.
Per my recent proposal.
o remove many WIN32_CLIENT_ONLY defines
o add WIN32_ONLY_COMPILER define
o add 3rd argument to open() for portability
o add include/port/win32_msvc directory for
system includes
Magnus Hagander
byte-swapping on the port number which causes the call to fail on Intel
Macs.
This patch uses htons() instead of htonl() and fixes this bug.
Ashley Clark
it later. This fixes a problem where EXEC_BACKEND didn't have progname
set, causing a segfault if log_min_messages was set below debug2 and our
own snprintf.c was being used.
Also alway strdup() progname.
Backpatch to 8.1.X and 8.0.X.
rather than elog(FATAL), when there is no more room in ShmemBackendArray.
This is a security issue since too many connection requests arriving close
together could cause the postmaster to shut down, resulting in denial of
service. Reported by Yoshiyuki Asaba, fixed by Magnus Hagander.
an LWLock instead of a spinlock. This hardly matters on Unix machines
but should improve startup performance on Windows (or any port using
EXEC_BACKEND). Per previous discussion.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
to assume that the string pointer passed to set_ps_display is good forever.
There's no need to anyway since ps_status.c itself saves the string, and
we already had an API (get_ps_display) to return it.
I believe this explains Jim Nasby's report of intermittent crashes in
elog.c when %i format code is in use in log_line_prefix.
While at it, repair a previously unnoticed problem: on some platforms such as
Darwin, the string returned by get_ps_display was blank-padded to the maximum
length, meaning that lock.c's attempt to append " waiting" to it never worked.
since it can take a fair amount of time and this can confuse boot scripts
that expect postmaster.pid to appear quickly. Move initialization of SSL
library and preloaded libraries to after that point, too, just for luck.
Per reports from Tony Caduto and others.
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
should surely be timestamptz not timestamp; fix some but not all of the
holes in check_and_make_absolute(); other minor cleanup. Also put in
the missed catversion bump.
delay and limit, both as global GUCs and as table-specific entries in
pg_autovacuum. stats_reset_on_server_start is now OFF by default,
but a reset is forced if we did WAL replay. XID-wrap vacuums do not
ANALYZE, but do FREEZE if it's a template database. Alvaro Herrera
track shared relations in a separate hashtable, so that operations done
from different databases are counted correctly. Add proper support for
anti-XID-wraparound vacuuming, even in databases that are never connected
to and so have no stats entries. Miscellaneous other bug fixes.
Alvaro Herrera, some additional fixes by Tom Lane.
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.