Previously, we relied on HEAP2_NEW_CID records and XACT_INVALIDATION
records to know if the transaction has modified the catalog, and that
information is not serialized to snapshot. Therefore, after the restart,
if the logical decoding decodes only the commit record of the transaction
that has actually modified a catalog, we will miss adding its XID to the
snapshot. Thus, we will end up looking at catalogs with the wrong
snapshot.
To fix this problem, this change adds the list of transaction IDs and
sub-transaction IDs, that have modified catalogs and are running during
snapshot serialization, to the serialized snapshot. After restart or
otherwise, when we restore from such a serialized snapshot, the
corresponding list is restored in memory. Now, when decoding a COMMIT
record, we check both the list and the ReorderBuffer to see if the
transaction has modified catalogs.
Since this adds additional information to the serialized snapshot, we
cannot backpatch it. For back branches, we took another approach.
We remember the last-running-xacts list of the decoded RUNNING_XACTS
record after restoring the previously serialized snapshot. Then, we mark
the transaction as containing catalog changes if it's in the list of
initial running transactions and its commit record has
XACT_XINFO_HAS_INVALS. This doesn't require any file format changes but
the transaction will end up being added to the snapshot even if it has
only relcache invalidations. But that won't be a problem since we use
snapshot built during decoding only to read system catalogs.
This commit bumps SNAPBUILD_VERSION because of a change in SnapBuild.
Reported-by: Mike Oh
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Shi yu, Takamichi Osumi, Kyotaro Horiguchi, Bertrand Drouvot, Ahsan Hadi
Backpatch-through: 10
Discussion: https://postgr.es/m/81D0D8B0-E7C4-4999-B616-1E5004DBDCD2%40amazon.com
When inserting a view referencing a foreign table that has WITH CHECK
OPTION constraints, in single-insert mode postgres_fdw retrieves the
data that was actually inserted on the remote side so that the WITH
CHECK OPTION constraints are enforced with the data locally, but in
batch-insert mode it cannot currently retrieve the data (except for the
row first inserted through the view), resulting in enforcing the WITH
CHECK OPTION constraints with the data passed from the core (except for
the first-inserted row), which led to incorrect results when inserting
into a view referencing a foreign table in which a remote BEFORE ROW
INSERT trigger changes the rows inserted through the view so that they
violate the view's WITH CHECK OPTION constraint. Also, the query
inserting into the view caused an assertion failure in assert-enabled
builds.
Fix these by disabling batch insertion when inserting into such a view.
Back-patch to v14 where batch insertion was added.
Discussion: https://postgr.es/m/CAPmGK17LpbTZs4m4a_6THP54UBeK9fHvX8aVVA%2BC6yEZDZwQcg%40mail.gmail.com
pread() and pwrite() are in SUSv2, and all targeted Unix systems have
them.
Previously, we defined pg_pread and pg_pwrite to emulate these function
with lseek() on old Unixen. The names with a pg_ prefix were a reminder
of a portability hazard: they might change the current file position.
That hazard is gone, so we can drop the prefixes.
Since the remaining replacement code is Windows-only, move it into
src/port/win32p{read,write}.c, and move the declarations into
src/include/port/win32_port.h.
No need for vestigial HAVE_PREAD, HAVE_PWRITE macros as they were only
used for declarations in port.h which have now moved into win32_port.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
We've heard a couple of reports of people having trouble with
multi-gigabyte-sized query-texts files. It occurred to me that on
32-bit platforms, there could be an issue with integer overflow
of calculations associated with the total query text size.
Address that with several changes:
1. Limit pg_stat_statements.max to INT_MAX / 2 not INT_MAX.
The hashtable code will bound it to that anyway unless "long"
is 64 bits. We still need overflow guards on its use, but
this helps.
2. Add a check to prevent extending the query-texts file to
more than MaxAllocHugeSize. If it got that big, qtext_load_file
would certainly fail, so there's not much point in allowing it.
Without this, we'd need to consider whether extent, query_offset,
and related variables shouldn't be off_t not size_t.
3. Adjust the comparisons in need_gc_qtexts() to be done in 64-bit
arithmetic on all platforms. It appears possible that under duress
those multiplications could overflow 32 bits, yielding a false
conclusion that we need to garbage-collect the texts file, which
could lead to repeatedly garbage-collecting after every hash table
insertion.
Per report from Bruno da Silva. I'm not convinced that these
issues fully explain his problem; there may be some other bug that's
contributing to the query-texts file becoming so large in the first
place. But it did get that big, so #2 is a reasonable defense,
and #3 could explain the reported performance difficulties.
(See also commit 8bbe4cbd9, which addressed some related bugs.
The second Discussion: link is the thread that led up to that.)
This issue is old, and is primarily a problem for old platforms,
so back-patch.
Discussion: https://postgr.es/m/CAB+Nuk93fL1Q9eLOCotvLP07g7RAv4vbdrkm0cVQohDVMpAb9A@mail.gmail.com
Discussion: https://postgr.es/m/5601D354.5000703@BlueTreble.com
ORDER BY / DISTINCT aggreagtes have, since implemented in Postgres, been
executed by always performing a sort in nodeAgg.c to sort the tuples in
the current group into the correct order before calling the transition
function on the sorted tuples. This was not great as often there might be
an index that could have provided pre-sorted input and allowed the
transition functions to be called as the rows come in, rather than having
to store them in a tuplestore in order to sort them once all the tuples
for the group have arrived.
Here we change the planner so it requests a path with a sort order which
supports the most amount of ORDER BY / DISTINCT aggregate functions and
add new code to the executor to allow it to support the processing of
ORDER BY / DISTINCT aggregates where the tuples are already sorted in the
correct order.
Since there can be many ORDER BY / DISTINCT aggregates in any given query
level, it's very possible that we can't find an order that suits all of
these aggregates. The sort order that the planner chooses is simply the
one that suits the most aggregate functions. We take the most strictly
sorted variation of each order and see how many aggregate functions can
use that, then we try again with the order of the remaining aggregates to
see if another order would suit more aggregate functions. For example:
SELECT agg(a ORDER BY a),agg2(a ORDER BY a,b) ...
would request the sort order to be {a, b} because {a} is a subset of the
sort order of {a,b}, but;
SELECT agg(a ORDER BY a),agg2(a ORDER BY c) ...
would just pick a plan ordered by {a} (we give precedence to aggregates
which are earlier in the targetlist).
SELECT agg(a ORDER BY a),agg2(a ORDER BY b),agg3(a ORDER BY b) ...
would choose to order by {b} since two aggregates suit that vs just one
that requires input ordered by {a}.
Author: David Rowley
Reviewed-by: Ronan Dunklau, James Coleman, Ranier Vilela, Richard Guo, Tom Lane
Discussion: https://postgr.es/m/CAApHDvpHzfo92%3DR4W0%2BxVua3BUYCKMckWAmo-2t_KiXN-wYH%3Dw%40mail.gmail.com
We can't check the output of this view very closely without
creating portability headaches, but we can make sure that
the number of rows is as-expected. In any case, this is
sufficient to exercise all the C code within, which is a
lot better than the 0% coverage we had before.
DongWook Lee
Discussion: https://postgr.es/m/CAAcByaLCHGJB7qAENEcx9D09UL=w4ma+yijwF_-1MSqQZ9wK6Q@mail.gmail.com
In commit 7c34555f8, I overlooked the need to configure SSPI
on Windows to allow login as the non-superuser role.
Fix that by adding auth_extra/--create-role incantation
(which, oddly enough, doesn't actually create the role).
Per buildfarm.
While here, upgrade the mechanism for temporarily setting
$ENV{PGUSER}, as per recommendation from ilmari.
Discussion: https://postgr.es/m/87edy7j1zz.fsf@wibble.ilmari.org
After commit 089480c07, it's necessary for background worker entry
points to be marked PGDLLEXPORT, else they aren't findable by
LookupBackgroundWorkerFunction(). Since pg_prewarm lacks any
regression tests, it's not surprising its worker entry points were
overlooked. (A quick search turned up no other such oversights.)
I added some documentation pointing out the need for this, too.
Robins Tharakan and Tom Lane
CAEP4nAzndnQv3-1QKb=D-hLoK3Rko12HHMFHHtdj2GQAUXO3gw@mail.gmail.com
We weren't exercising the session_preload_libraries option in any
meaningful way. auto_explain is a good testbed for doing so, since
it's one of the primary use-cases for session_preload_libraries.
Hence, adjust its TAP test to load the library via
session_preload_libraries not shared_preload_libraries. While at it,
feed test-specific settings to the backend via PGOPTIONS rather than
tediously rewriting postgresql.conf.
Also, since auto_explain has some PGC_SUSET parameters, we can use it
to provide a test case for the permissions-checking bug just fixed
by commit b35617de3.
Back-patch to v15 so that we have coverage for the permissions issue
in that branch too. To do that, I back-patched the refactoring
recently done by commit 550bc0a6c.
Dagfinn Ilmari Mannsåker and Tom Lane
Discussion: https://postgr.es/m/CABwTF4VEpwTHhRQ+q5MiC5ucngN-whN-PdcKeufX7eLSoAfbZA@mail.gmail.com
When postgres_fdw begins an asynchronous data fetch, it submits FETCH query
by using PQsendQuery(). If PQsendQuery() fails and returns 0, postgres_fdw
should report an error. But, previously, postgres_fdw reported an error
only when the return value is less than 0, though PQsendQuery() never return
the values other than 0 and 1. Therefore postgres_fdw could not handle
the failure to send FETCH query in an asynchronous data fetch.
This commit fixes postgres_fdw so that it reports an error
when PQsendQuery() returns 0.
Back-patch to v14 where asynchronous execution was supported in postgres_fdw.
Author: Fujii Masao
Reviewed-by: Japin Li, Tom Lane
Discussion: https://postgr.es/m/b187a7cf-d4e3-5a32-4d01-8383677797f3@oss.nttdata.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
Detail and hint messages should be full sentences and should end with a
period, but some of the messages newly-introduced in v15 did not follow
that.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20220719120948.GF12702@telsasoft.com
Backpatch-through: 15
file_fdw doesn't support INSERT, UPDATE, DELETE and TRUNCATE.
It has the regression test that confirms that INSERT, UPDATE and DELETE
fail on its foreign table, but not TRUNCATE yet. It's better to
also test TRUNCATE fails on a foreign table not allowing TRUNCATE,
for test coverage. This commit adds that regression test using file_fdw.
Author: Yugo Nagata
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20220630104812.ec1556481452c019874f4ac9@sraoss.co.jp
As $gzip is embedded in postgresql.conf \ needs to be escaped, otherwise guc.c
will take it as a string escape. Similarly, if "$gzip" contains spaces, the
prior incantation will fail. Both of these are common on windows.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/ce1b6eb3-5736-6f38-9775-b7020128b8d8@enterprisedb.com
Backpatch: 15-, where the test was added in 027fa0fd72
This is in preparation for defaulting to -fvisibility=hidden in extensions,
instead of relying on all symbols in extensions to be exported.
This should have been committed before 089480c077, but something in my commit
scripts went wrong.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211101020311.av6hphdl6xbjbuif@alap3.anarazel.de
Don't consider a constant of regconfig or other reg* types to be
shippable unless it refers to a built-in object, or an object in
an extension that's been marked shippable. Without this
restriction, we're too likely to send a constant that will fail
to parse on the remote server.
For the regconfig type only, consider OIDs up to 16383 to be
"built in", rather than the normal cutoff of 9999. Otherwise
the initdb-created text search configurations will be considered
unshippable, which is unlikely to make anyone happy.
It's possible that this new restriction will de-optimize queries
that were working satisfactorily before. Users can restore any
lost performance by making sure that objects that can be expected
to exist on the remote side are in shippable extensions. However,
that's not a change that people are likely to be happy about having
to make after a minor-release update. Between that consideration
and the lack of field complaints, let's just change this in HEAD.
Noted while fixing bug #17483, although this is not precisely
the problem that that report complained about.
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
The motivation for this is to ensure successful transmission of the
values of constants of regconfig and other reg* types. The remote
will be reading them with search_path = 'pg_catalog', so schema
qualification is necessary when referencing objects in other schemas.
Per bug #17483 from Emmanuel Quincerot. Back-patch to all supported
versions. (There's some other stuff to do here, but it's less
back-patchable.)
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/9847b13c-b785-f4e2-75c3-12ec77a3b05c@enterprisedb.com
Now some foreign data wrappers support TRUNCATE command.
So it's useful to support TRUNCATE triggers on foreign tables for
audit logging or for preventing undesired truncation.
Author: Yugo Nagata
Reviewed-by: Fujii Masao, Ian Lawrence Barwick
Discussion: https://postgr.es/m/20220630193848.5b02e0d6076b86617a915682@sraoss.co.jp
Remove PageIsValid() and PageSizeIsValid(), which weren't used and
seem unnecessary.
Some code using these formerly-macros needs some adjustments because
it was previously playing loose with the Page vs. PageHeader types,
which is no longer possible with the functions instead of macros.
Reviewed-by: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5b558da8-99fb-0a99-83dd-f72f05388517%40enterprisedb.com
* Remove arbitrary mention of certain endianness and bitness variants;
it's enough to say that applicable variants are expected to work.
* List RISC-V (known to work, being tested).
* List SuperH and M88K (code exists, unknown status, like M68K).
* De-list VAX and remove code (known not to work).
* Remove stray trace of Alpha (support was removed years ago).
* List illumos, DragonFlyBSD (known to work, being tested).
* No need to single Windows out by listing a specific version, when we
don't do that for other OSes; it's enough to say that we support
current versions of the listed OSes (when 16 ships, that'll be
Windows 10+).
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Discussion: https://postgr.es/m/CA%2BhUKGKk7NZO1UnJM0PyixcZPpCGqjBXW_0bzFZpJBGAf84XKg%40mail.gmail.com
It's not very robust to assume that each inserted row will produce
exactly one WAL record and that no other WAL records will be generated
in the process, because for example a particular transaction could
always be the one that has to extend clog.
Because these tests are not run by 'make installcheck' but only by
'make check', it may be that in our current testing infrastructure
this can't be hit, but it doesn't seem like a good idea to rely on
that, since unrelated changes to the regression tests or the way
write-ahead logging is done could easily cause it to start happening,
and debugging such failures is a pain.
Adjust the regression test to be less sensitive.
Anton Melnikov, reviewed by Julien Rouhaud
Discussion: http://postgr.es/m/1ccd00d9-1723-6b68-ae56-655aab00d406@inbox.ru
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
auto_explain.log_parameter_max_length is a new GUC part of the
extension, similar to the corresponding core setting, that controls the
inclusion of query parameters in the logged explain output.
More tests are added to check the behavior of this new parameter: when
parameters logged in full (the default of -1), when disabled (value of
0) and when partially truncated (value different than the two others).
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87ee09mohb.fsf@wibble.ilmari.org
As noted by Thomas Munro, CLDR 36 has added SOUND RECORDING COPYRIGHT
(U+2117), and we use CLDR 41, so this can be removed from the set of
special cases.
The set of regression tests is expanded for degree signs, which are two
of the special cases, and a fancy case with U+210C in Latin-ASCII.xml
that we have discovered about when diving into what could be done for
Cyrillic characters (this last part is material for a future patch, not
tackled yet).
While on it, some of the assertions of generate_unaccent_rules.py are
expanded to report the codepoint on which a failure is found, something
useful for debugging.
Extracted from a larger patch by the same author.
Author: Przemysław Sztoch
Discussion: https://postgr.es/m/8478da0d-3b61-d24f-80b4-ce2f5e971c60@sztoch.pl
durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), and it falls back to rename() on some
platforms (aka WIN32), which offers no such overwrite protection. Most
callers use durable_rename_excl() just in case there is an existing
file, but in practice there shouldn't be one (see below for more
details).
Furthermore, failures during durable_rename_excl() can result in
multiple hard links to the same file. As per Nathan's tests, it is
possible to end up with two links to the same file in pg_wal after a
crash just before unlink() during WAL recycling. Specifically, the test
produced links to the same file for the current WAL file and the next
one because the half-recycled WAL file was re-recycled upon restarting,
leading to WAL corruption.
This change replaces all the calls of durable_rename_excl() to
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it and ordinarily there shouldn't be one. The function itself
is left around in case any extensions are using it. It will be removed
on HEAD via a follow-up commit.
Here is a summary of the existing callers of durable_rename_excl() (see
second discussion link at the bottom), replaced by this commit. First,
basic_archive used it to avoid overwriting an archive concurrently
created by another server, but as mentioned above, it will still
overwrite files on some platforms. Second, xlog.c uses it to recycle
past WAL segments, where an overwrite should not happen (origin of the
change at f0e37a8) because there are protections about the WAL segment
to select when recycling an entry. The third and last area is related
to the write of timeline history files. writeTimeLineHistory() will
write a new timeline history file at the end of recovery on promotion,
so there should be no such files for the same timeline.
What remains is writeTimeLineHistoryFile(), that can be used in parallel
by a WAL receiver and the startup process, and some digging of the
buildfarm shows that EEXIST from a WAL receiver can happen with an error
of "could not link file \"pg_wal/xlogtemp.NN\" to \"pg_wal/MM.history\",
which would cause an automatic restart of the WAL receiver as it is
promoted to FATAL, hence this should improve the stability of the WAL
receiver as rename() would overwrite an existing TLI history file
already fetched by the startup process at recovery.
This is a bug fix, but knowing the unlikeliness of the problem involving
one or more crashes at an exceptionally bad moment, no backpatch is
done. Also, I want to be careful with such changes (aaa3aed did the
opposite of this change by removing HAVE_WORKING_LINK so as Windows
would do a link() rather than a rename() but this was not
concurrent-safe). A backpatch could be revisited in the future. This
is the second time this change is attempted, ccfbd92 being the first
one, but this time no assertions are added for the case of a TLI history
file written concurrently by the WAL receiver or the startup process
because we can expect one to exist (some of the TAP tests are able to
trigger with a proper timing).
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Discussion: https://postgr.es/m/Ym6GZbqQdlalSKSG@paquier.xyz
There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
Previously, the tests were structured so as all the queries whose plans
are checked run first, followed by pattern checks using the full set of
server logs. This can be problematic when extending the tests, as this
increases query plan overlaps, where two tests finish by having similar
plan outputs potentially invalidating the tests wanted.
The tests are refactored so as log content matches are checked in
isolation of each query run, by grabbing the position of the server logs
before running each query whose plan is generated in the logs. This
avoids issues when extending the tests, something that would become a
larger problem with a follow-up patch that adds a new GUC in
auto_explain to control the size of the each parameter logged.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87ee09mohb.fsf@wibble.ilmari.org
MemSet() with a value other than 0 just falls back to memset(), so the
indirection is unnecessary if the value is constant and not 0. Since
there is some interest in getting rid of MemSet(), this gets some easy
cases out of the way. (There are a few MemSet() calls that I didn't
change to maintain the consistency with their surrounding code.)
Discussion: https://www.postgresql.org/message-id/flat/CAEudQApCeq4JjW1BdnwU=m=-DvG5WyUik0Yfn3p6UNphiHjj+w@mail.gmail.com
Commit a117cebd63 used the original userid
for ACL checks located directly in DefineIndex(), but it still adopted
the table owner userid for more ACL checks than intended. That broke
dump/reload of indexes that refer to an operator class, collation, or
exclusion operator in a schema other than "public" or "pg_catalog".
Back-patch to v10 (all supported versions), like the earlier commit.
Nathan Bossart and Noah Misch
Discussion: https://postgr.es/m/f8a4105f076544c180a87ef0c4822352@stmuk.bayern.de
The macro is being applied to a TOAST pointer, not a varlena header.
Therefore the use of VARATT_IS_COMPRESSED() is wrong. We can check
VARATT_EXTERNAL_IS_COMPRESSED(), but then we don't need the length
check that follows.
Report and fix by Kyotaro Horiguchi.
Discussion: http://postgr.es/m/20220517.162719.1671558681467343711.horikyota.ntt@gmail.com
Since a117cebd6, some older gcc versions issue "variable may be used
uninitialized in this function" complaints for brin_summarize_range.
Silence that using the same coding pattern as in bt_index_check_internal;
arguably, a117cebd6 had too narrow a view of which compilers might give
trouble.
Nathan Bossart and Tom Lane. Back-patch as the previous commit was.
Discussion: https://postgr.es/m/20220601163537.GA2331988@nathanxps13
Currently, preloaded libraries are expected to request additional
shared memory and LWLocks in _PG_init(). However, it is not unusal
for such requests to depend on MaxBackends, which won't be
initialized at that time. Such requests could also depend on GUCs
that other modules might change. This introduces a new hook where
modules can safely use MaxBackends and GUCs to request additional
shared memory and LWLocks.
Furthermore, this change restricts requests for shared memory and
LWLocks to this hook. Previously, libraries could make requests
until the size of the main shared memory segment was calculated.
Unlike before, we no longer silently ignore requests received at
invalid times. Instead, we FATAL if someone tries to request
additional shared memory or LWLocks outside of the hook.
Nathan Bossart and Julien Rouhaud
Discussion: https://postgr.es/m/20220412210112.GA2065815%40nathanxps13
Discussion: https://postgr.es/m/Yn2jE/lmDhKtkUdr@paquier.xyz
Expand the comment about the parallel_commit option to mention that the
default is false.
Also, since the comment about alteration of the keep_connections option,
which was located above the expanded comment, holds true for the
parallel_commit option, rewrite it to reflect this, and move it to after
the expanded comment.
Follow-up for commit 04e706d42.
Discussion: https://postgr.es/m/CAPmGK16Kg2Bf90sqzcZ4YM5cN_G-4h7wFUS01qQpqNB%2B2BG5_w%40mail.gmail.com
The code for unloading a library has been commented-out for over 12
years, ever since commit 602a9ef5a7, and we're
no closer to supporting it now than we were back then.
Nathan Bossart, reviewed by Michael Paquier and by me.
Discussion: http://postgr.es/m/Ynsc9bRL1caUSBSE@paquier.xyz
When a feature enumerates relations and runs functions associated with
all found relations, the feature's user shall not need to trust every
user having permission to create objects. BRIN-specific functionality
in autovacuum neglected to account for this, as did pg_amcheck and
CLUSTER. An attacker having permission to create non-temp objects in at
least one schema could execute arbitrary SQL functions under the
identity of the bootstrap superuser. CREATE INDEX (not a
relation-enumerating operation) and REINDEX protected themselves too
late. This change extends to the non-enumerating amcheck interface.
Back-patch to v10 (all supported versions).
Sergey Shinderuk, reviewed (in earlier versions) by Alexander Lakhin.
Reported by Alexander Lakhin.
Security: CVE-2022-1552
Amit Kapila
Robert Haas
Etsuro Fujita
Thomas Munro
Tom Lane
David Rowley
Fujii Masao
Michael Paquier
Andres Freund
Peter Eisentraut
Noah Misch