Prior to this commit, we only consider each tuple or line pointer
on the page in isolation, but now we can do some validation of a line
pointer against its successor. For example, a redirect line pointer
shouldn't point to another redirect line pointer, and if a tuple
is HOT-updated, the result should be a heap-only tuple.
Himanshu Upadhyaya and Robert Haas, reviewed by Aleksander Alekseev,
Andres Freund, and Peter Geoghegan.
Freezing the relation N times and fetching the tuples one-by-one isn't that
cheap. On my machine this reduces test times by a bit less than one second, on
windows CI it's a few seconds.
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20230309001558.b7shzvio645ebdta@awork3.anarazel.de
64bit xids can't represent xids before epoch 0 (see also be504a3e97). When
FullTransactionIdFromXidAndCtx() was passed such an xid, it'd create a 64bit
xid far into the future. Noticed while adding assertions in the course of
investigating be504a3e97, as amcheck's test create such xids.
To fix the issue, just return FirstNormalFullTransactionId in this case. A
freshly initdb'd cluster already has a newer horizon. The most minimal version
of this would make the messages for some detected corruptions differently
inaccurate. To make those cases accurate, switch
FullTransactionIdFromXidAndCtx() to use the 32bit modulo difference between
xid and nextxid to compute the 64bit xid, yielding sensible "in the future" /
"in the past" answers.
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20230108002923.cyoser3ttmt63bfn@awork3.anarazel.de
Backpatch: 14-, where heapam verification was introduced
The previous method for doing that was to write zeroes into a
predetermined set of page locations. However, there's a roughly
1-in-64K chance that the existing checksum will match by chance,
and yesterday several buildfarm animals started to reproducibly
see that, resulting in test failures because no checksum mismatch
was reported.
Since the checksum includes the page LSN, test success depends on
the length of the installation's WAL history, which is affected by
(at least) the initial catalog contents, the set of locales installed
on the system, and the length of the pathname of the test directory.
Sooner or later we were going to hit a chance match, and today is
that day.
Harden these tests by specifically inverting the checksum field and
leaving all else alone, thereby guaranteeing that the checksum is
incorrect.
In passing, fix places that were using seek() to set up for syswrite(),
a combination that the Perl docs very explicitly warn against. We've
probably escaped problems because no regular buffered I/O is done on
these filehandles; but if it ever breaks, we wouldn't deserve or get
much sympathy.
Although we've only seen problems in HEAD, now that we recognize the
environmental dependencies it seems like it might be just a matter
of time until someone manages to hit this in back-branch testing.
Hence, back-patch to v11 where we started doing this kind of test.
Discussion: https://postgr.es/m/3192026.1648185780@sss.pgh.pa.us
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
Expand the checks of toasted attributes to complain if the rawsize is
overlarge. For compressed attributes, also complain if compression
appears to have expanded the attribute or if the compression method is
invalid.
Mark Dilger, reviewed by Justin Pryzby, Alexander Alekseev, Heikki
Linnakangas, Greg Stark, and me.
Discussion: http://postgr.es/m/8E42250D-586A-4A27-B317-8B062C3816A8@enterprisedb.com
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
There is only one constructor now for PostgresNode, with the idiomatic
name 'new'. The method is not exported by the class, and must be called
as "PostgresNode->new('name',[args])". All the TAP tests that use
PostgresNode are modified accordingly. Third party scripts will need
adjusting, which is a fairly mechanical process (I just used a sed
script).
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
A couple of tests have been using 0 as magic constant while SEEK_SET can
be used instead. This makes the code easier to understand, and more
consistent with the changes done in 3c5b068.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YHrc24AgJQ6tQ1q0@paquier.xyz
We don't need to mention the attribute number in these messages, because
there's a dedicated column for that, but we should mention the toast
value ID, because that's really useful for any follow-up troubleshooting
the user wants to do. This also rewords some of the messages to hopefully
read a little better.
Also, use VARATT_EXTERNAL_GET_POINTER in case we're accessing a TOAST
pointer that isn't aligned on a platform that's fussy about alignment,
so that we don't crash while corruption-checking the user's data.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/7D3B9BF6-50D0-4C30-8506-1C1851C7F96F@enterprisedb.com
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Don't complain about the last TOAST chunk number being different
from what we expected if there are no TOAST chunks at all.
In such a case, saying that the final chunk number is 0 is not
really accurate, and the fact the value is missing from the
TOAST table is reported separately anyway.
Mark Dilger
Discussion: http://postgr.es/m/AA5506CE-7D2A-42E4-A51D-358635E3722D@enterprisedb.com
It does not work on all versions of perl across all platforms.
To avoid endian-ness issues, pick a new value for column a
that has the same upper 4 bytes as lower 4 bytes. Try to
make it something that isn't likely to occur anywhere nearby
in the page.
Discussion: http://postgr.es/m/29DA079B-0658-4E66-BDAA-0EFD7B64D9C6@enterprisedb.com
Test #12 overwrote a 1-byte varlena header to make it look like the
initial byte of a 4-byte varlena header, but the results were
endian-dependent. Also, the byte "abc" that followed the overwritten
byte would be interpreted differently depending on endian-ness.
Overwrite 4 bytes instead, in an endian-aware manner.
Test #13 accidentally managed to depend on TOAST_MAX_CHUNK_SIZE,
which varies slightly depending on MAXIMUM_ALIGNOF. That's not
the point anyway, so make the regexp insensitive to the expected
number of chunks.
Mark Dilger
Discussion: http://postgr.es/m/A80D68F6-E38F-482D-9522-E2FB6AAFE8A1@enterprisedb.com
Robert Haas
Andres Freund
Bruce Momjian
Tom Lane
Daniel Gustafsson
Andrew Dunstan
Peter Eisentraut
Michael Paquier