Allow CustomPath to have a list of paths, CustomPlan a list of plans,
and CustomPlanState a list of planstates known to the core system, so
that custom path/plan providers can more reasonably use this
infrastructure for nodes with multiple children.
KaiGai Kohei, per a design suggestion from Tom Lane, with some
further kibitzing by me.
1. Replay of the WAL record for setting a bit in the visibility map
contained an assertion that a full-page image of that record type can only
occur with checksums enabled. But it can also happen with wal_log_hints, so
remove the assertion. Unlike checksums, wal_log_hints can be changed on the
fly, so it would be complicated to figure out if it was enabled at the time
that the WAL record was generated.
2. wal_log_hints has the same effect on the locking needed to read the LSN
of a page as data checksums. BufferGetLSNAtomic() didn't get the memo.
Backpatch to 9.4, where wal_log_hints was added.
Commit f3b5565dd4 was a couple of bricks shy
of a load; specifically, it missed putting pg_trigger_tgrelid_tgname_index
into the relcache init file, because that index is not used by any
syscache. However, we have historically nailed that index into cache for
performance reasons. The upshot was that load_relcache_init_file always
decided that the init file was busted and silently ignored it, resulting
in a significant hit to backend startup speed.
To fix, reinstantiate RelationIdIsInInitFile() as a wrapper around
RelationSupportsSysCache(), which can know about additional relations
that should be in the init file despite being unknown to syscache.c.
Also install some guards against future mistakes of this type: make
write_relcache_init_file Assert that all nailed relations get written to
the init file, and make load_relcache_init_file emit a WARNING if it takes
the "wrong number of nailed relations" exit path. Now that we remove the
init files during postmaster startup, that case should never occur in the
field, even if we are starting a minor-version update that added or removed
rels from the nailed set. So the warning shouldn't ever be seen by end
users, but it will show up in the regression tests if somebody breaks this
logic.
Back-patch to all supported branches, like the previous commit.
Commit c03ad5602f introduced a planner
performance regression for UPDATE/DELETE on large inheritance sets.
It required copying the append_rel_list (which is of size proportional to
the number of inherited tables) once for each inherited table, thus
resulting in O(N^2) time and memory consumption. While it's difficult to
avoid that in general, the extra work only has to be done for
append_rel_list entries that actually reference subquery RTEs, which
inheritance-set entries will not. So we can buy back essentially all of
the loss in cases without subqueries in FROM; and even for those, the added
work is mainly proportional to the number of UNION ALL subqueries.
Back-patch to 9.2, like the previous commit.
Tom Lane and Dean Rasheed, per a complaint from Thomas Munro.
This supplements the GNU libc bug #6530 workarounds introduced in commit
54cd4f0457. On affected systems, a
tar-format pg_basebackup failed when some filename beneath the data
directory was not valid character data in the postmaster/walsender
locale. Back-patch to 9.1, where pg_basebackup was introduced. Extant,
bug-prone conversion specifications receive only ASCII bytes or involve
low-importance messages.
Previously autovacuum was not necessarily triggered if space in the
members slru got tight. The first problem was that the signalling was
tied to values in the offsets slru, but members can advance much
faster. Thats especially a problem if old sessions had been around that
previously prevented the multixact horizon to increase. Secondly the
skipping logic doesn't work if the database was restarted after
autovacuum was triggered - that knowledge is not preserved across
restart. This is especially a problem because it's a common
panic-reaction to restart the database if it gets slow to
anti-wraparound vacuums.
Fix the first problem by separating the logic for members from
offsets. Trigger autovacuum whenever a multixact crosses a segment
boundary, as the current member offset increases in irregular values, so
we can't use a simple modulo logic as for offsets. Add a stopgap for
the second problem, by signalling autovacuum whenver ERRORing out
because of boundaries.
Discussion: 20150608163707.GD20772@alap3.anarazel.de
Backpatch into 9.3, where it became more likely that multixacts wrap
around.
9a20a9b2 added a new elog(), enabled when WAL_DEBUG is defined. The
other WAL_DEBUG dependant messages check for the wal_debug GUC, but this
one did not. While at it replace 'upto' with 'up to'.
Discussion: 20150610110253.GF3832@alap3.anarazel.de
Backpatch to 9.4, the first release containing 9a20a9b2.
POSIX permits setlocale() calls to invalidate any previous setlocale()
return values, but commit 5f538ad004
neglected to account for setlocale(LC_CTYPE, NULL) doing so. The effect
was to set the LC_CTYPE environment variable to an unintended value.
pg_perm_setlocale() sets this variable to assist PL/Perl; without it,
Perl would undo PostgreSQL's locale settings. The known-affected
configurations are 32-bit, release builds using Visual Studio 2012 or
Visual Studio 2013. Visual Studio 2010 is unaffected, as were all
buildfarm-attested configurations. In principle, this bug could leave
the wrong LC_CTYPE in effect after PL/Perl use, which could in turn
facilitate problems like corrupt tsvector datums. No known platform
experiences that consequence, because PL/Perl on Windows does not use
this environment variable.
The bug has been user-visible, as early postmaster failure, on systems
with Windows ANSI code page set to CP936 for "Chinese (Simplified, PRC)"
and probably on systems using other multibyte code pages.
(SetEnvironmentVariable() rejects values containing character data not
valid under the Windows ANSI code page.) Back-patch to 9.4, where the
faulty commit first appeared.
Reported by Didi Hu and 林鹏程. Reviewed by Tom Lane, though this fix
strategy was not his first choice.
Some of the entries in the inclusion opclasses where missing operators,
and we had an entry for inet_inclusion_ops instead of
network_inclusion_ops. Sort the operators within each opclass by
strategy number, just to make it easier to spot mistakes.
Also sort the rows by data type name, rather than OID.
This adjusts commit 82233ce7ea so that the
postmaster does not exit until all its child processes have exited, even
if the 5-second timeout elapses and we have to send SIGKILL. There is no
great value in having the postmaster process quit sooner, and doing so can
mislead onlookers into thinking that the cluster is fully terminated when
actually some child processes still survive.
This effect might explain recent test failures on buildfarm member hamster,
wherein we failed to restart a cluster just after shutting it down with
"pg_ctl stop -m immediate".
I also did a bit of code review/beautification, including fixing a faulty
use of the Max() macro on a volatile expression.
Back-patch to 9.4. In older branches, the postmaster never waited for
children to exit during immediate shutdowns, and changing that would be
too much of a behavioral change.
This avoids the problem that it might go to sleep for an unreasonable
amount of time in unusual conditions like the server clock moving
backwards an unreasonable amount of time.
(Simply moving the server clock forward again doesn't solve the problem
unless you wake up the autovacuum launcher manually, say by sending it
SIGHUP).
Per trouble report from Prakash Itnal in
https://www.postgresql.org/message-id/CAHC5u79-UqbapAABH2t4Rh2eYdyge0Zid-X=Xz-ZWZCBK42S0Q@mail.gmail.com
Analyzed independently by Haribabu Kommi and Tom Lane.
Since find_multixact_start() relies on SimpleLruDoesPhysicalPageExist(),
and that function looks only at the on-disk state, it's possible for it
to fail to find a page that exists in the in-memory SLRU that has not
been written yet. If that happens, SetOffsetVacuumLimit() will
erroneously decide to force emergency autovacuuming immediately.
We should probably fix find_multixact_start() to consider the data
cached in memory as well as on the on-disk state, but that's no excuse
for SetOffsetVacuumLimit() to be stupid about the case where it can
no longer read the value after having previously succeeded in doing so.
Report by Andres Freund.
POSIX permits setlocale() calls to invalidate any previous setlocale()
return values. Commit 5f538ad004
neglected to account for that. In advance of fixing that bug, switch to
failing hard on affected configurations. This is a planned temporary
commit to assay buildfarm-represented configurations.
jsonb_set() and other clients of the setPathArray() utility function
could get spurious results when an array integer subscript is provided
that is not within the range of int.
To fix, ensure that the value returned by strtol() within setPathArray()
is within the range of int; when it isn't, assume an invalid input in
line with existing, similar cases. The path-orientated operators that
appeared in PostgreSQL 9.3 and 9.4 do not call setPathArray(), and
already independently take this precaution, so no change there.
Peter Geoghegan
In commit 9e3ad1aac5 I modified plpgsql
to use exec_stmt_return's simple-variables fast path in more cases.
However, I overlooked that there are really two different return
conventions in use here, depending on whether estate->retistuple is true,
and the existing fast-path code had only bothered to handle one of them.
So trying to return a scalar in a function returning composite, or vice
versa, could lead to unexpected error messages (typically "cache lookup
failed for type 0") or to a null-pointer-dereference crash.
In the DTYPE_VAR case, we can just throw error if retistuple is true,
corresponding to what happens in the general-expression code path that was
being used previously. (Perhaps someday both of these code paths should
attempt a coercion, but today is not that day.)
In the REC and ROW cases, just hand the problem to exec_eval_datum()
when not retistuple. Also clean up the ROW coding slightly so it looks
more like exec_eval_datum().
The previous commit also caused exec_stmt_return_next() to be used in
more cases, but that code seems to be OK as-is.
Per off-list report from Serge Rielau. This bug is new in 9.5 so no need
to back-patch.
We already tried to improve this once, but the "improved" text was rather
off-target if you had provided a USING clause. Also, it seems helpful
to provide the exact text of a suggested USING clause, so users can just
copy-and-paste it when needed. Per complaint from Keith Rarick and a
suggestion from Merlin Moncure.
Back-patch to 9.2 where the current wording was adopted.
After the archiver dies, postmaster tries to start a new one immediately.
But previously this could happen only while server was running normally
even though archiving was enabled always (i.e., archive_mode was set to
always). So the archiver running during recovery could not restart soon
after it died. This is an oversight in commit ffd3774.
This commit changes reaper(), postmaster's signal handler to cleanup
after a child process dies, so that it tries to a new archiver even during
recovery if necessary.
Patch by me. Review by Alvaro Herrera.
Robert Haas
Heikki Linnakangas
Tom Lane
Fujii Masao
Peter Eisentraut
Noah Misch
Alvaro Herrera
Andres Freund
Andrew Dunstan
Michael Meskes
Bruce Momjian