in favor of using the REINDEX TABLE apparatus, which does the same thing
simpler and faster. Also, make TRUNCATE not use cluster.c at all, but
just assign a new relfilenode and REINDEX. This partially addresses
Hartmut Raschick's complaint from last December that 7.4's TRUNCATE is
an order of magnitude slower than prior releases. By getting rid of
a lot of unnecessary catalog updates, these changes buy back about a
factor of two (on my system). The remaining overhead seems associated
with creating and deleting storage files, which we may not be able to
do much about without abandoning transaction safety for TRUNCATE.
modify. Also fix a passel of problems with ALTER TABLE CLUSTER ON:
failure to check that the index is safe to cluster on (or even belongs
to the indicated rel, or even exists), and failure to broadcast a relcache
flush event when changing an index's state.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
remove separate implementation of ALTER TABLE SET WITHOUT OIDS in favor
of doing a regular DROP. Also, cause CREATE TABLE to account completely
correctly for the inheritance status of the OID column. This fixes
problems with dropping OID columns that have dependencies, as noted by
Christopher Kings-Lynne, as well as making sure that you can't drop an
OID column that was inherited from a parent.
problem, per previous discussion. Make some additional changes to
centralize the knowledge of just how identifier downcasing is done,
in hopes of simplifying any future tweaking in this area.
This commit teaches ANALYZE to store such stats in pg_statistic, but
nothing is done yet about teaching the planner to use 'em.
Also, repair longstanding oversight in separate ANALYZE command: it
updated the pg_class.relpages and reltuples counts for the table proper,
but not for indexes.
indexes, it seems like we ought to put another layer of indirection
between the compute_stats functions and the actual data storage. This
would allow us to compute the values on-the-fly, for example.
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
should not be too eager to reject paths involving unknown schemas, since
it can't really tell whether the schemas exist in the target database.
(Also, when reading pg_dumpall output, it could be that the schemas
don't exist yet, but eventually will.) ALTER USER SET has a similar issue.
So, reduce the normal ERROR to a NOTICE when checking search_path values
for these commands. Supporting this requires changing the API for GUC
assign_hook functions, which causes the patch to touch a lot of places,
but the changes are conceptually trivial.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
a single LEFT JOIN query instead of firing the check trigger for each
row individually. Stephan Szabo, with some kibitzing from Tom Lane and
Jan Wieck.
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
> >
> > - Add check in pg_dump to see if the value returned is the max /min
> > values and replace with NO MAXVALUE, NO MINVALUE.
> >
> > - Change START and INCREMENT to use START WITH and INCREMENT BY syntax.
> > This makes it a touch easier to port to other databases with sequences
> > (Oracle). PostgreSQL supports both syntaxes already.
>
> + char bufm[100],
> + bufx[100];
>
> This seems to be an arbitary size. Why not set it to the actual maximum
> length?
>
> Also:
>
> + snprintf(bufm, 100, INT64_FORMAT, SEQ_MINVALUE);
> + snprintf(bufx, 100, INT64_FORMAT, SEQ_MAXVALUE);
>
> sizeof(bufm), sizeof(bufx) is probably the more
> maintenance-friendly/standard way to do it.
I changed the code to use sizeof - but will wait for a response from
Peter before changing the size. It's consistent throughout the sequence
code to be 100 for this purpose.
Rod Taylor <rbt@rbt.ca>
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
On Wed, 2003-01-08 at 21:59, Christopher Kings-Lynne wrote:
> I agree. I want to remove OIDs from heaps of our tables when we go to 7.3.
> I'd rather not have to do it in the dump due to down time.
Rod Taylor <rbt@rbt.ca>
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
-hackers a couple days ago.
Notes/caveats:
- added regression tests for the new functionality, all
regression tests pass on my machine
- added pg_dump support
- updated PL/PgSQL to support per-statement triggers; didn't
look at the other procedural languages.
- there's (even) more code duplication in trigger.c than there
was previously. Any suggestions on how to refactor the
ExecXXXTriggers() functions to reuse more code would be
welcome -- I took a brief look at it, but couldn't see an
easy way to do it (there are several subtly-different
versions of the code in question)
- updated the documentation. I also took the liberty of
removing a big chunk of duplicated syntax documentation in
the Programmer's Guide on triggers, and moving that
information to the CREATE TRIGGER reference page.
- I also included some spelling fixes and similar small
cleanups I noticed while making the changes. If you'd like
me to split those into a separate patch, let me know.
Neil Conway
- CLUSTER ALL clusters all the tables that have some index with
indisclustered set and the calling user owns.
- CLUSTER tablename clusters the named table, using the index with
indisclustered set. If no index has the bit set, throws elog(ERROR).
- The multi-relation version (CLUSTER ALL) uses a multitransaction
approach, similar to what VACUUM does.
Alvaro Herrera
before commit, not after :-( --- the original coding is not only unsafe
if an error occurs while it's processing, but it generates an invalid
sequence of WAL entries. Resurrect 7.2 logic for deleting items when
no longer needed. Use an enum instead of random macros. Editorialize
on names used for routines and constants. Teach backend/nodes routines
about new field in CreateTable struct. Add a regression test.
query that uses it. This ensures that triggers will be applied consistently
throughout a query even if someone commits changes to the relation's
pg_class.reltriggers field meanwhile. Per crash report from Laurette Cisneros.
While at it, simplify memory management in relcache.c, which no longer
needs the old hack to try to keep trigger info in the same place over
a relcache entry rebuild. (Should try to fix rd_att and rewrite-rule
access similarly, someday.) And make RelationBuildTriggers simpler and
more robust by making it build the trigdesc in working memory and then
CopyTriggerDesc() into cache memory.
with OPAQUE. CREATE LANGUAGE, CREATE TRIGGER, and CREATE TYPE will all
accept references to functions declared with OPAQUE --- but they will
issue a NOTICE, and will modify the function entries in pg_proc to have
the preferred type-safe argument or result types instead of OPAQUE.
Per recent pghackers discussions.
column additions, deletions, and renames that would let a child table
get out of sync with its parent. Patch by Alvaro Herrera, with some
kibitzing by Tom Lane.
> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
> Looks like Alvaro got sideswiped by the system catalog indexing changes
> I made over the weekend. It's a simple change, just reduce the whole
> mess to a "CatalogUpdateIndexes()" call.
I update two tuples, so I manually CatalogOpenIndexes() and
CatalogIndexInsert() two times, as per comments in
CatalogUpdateIndexes().
I also removed a couple of useless CommandCounterIncrement(), some
useless definitions in src/include/commands/cluster.h and useless
includes in src/backend/commands/cluster.c. This version passes the
regression test I had made for previous versions.
Alvaro Herrera
has_language_privilege, has_schema_privilege to let SQL queries test
all the new privilege types in 7.3. Also, add functions pg_table_is_visible,
pg_type_is_visible, pg_function_is_visible, pg_operator_is_visible,
pg_opclass_is_visible to test whether objects contained in schemas are
visible in the current search path. Do some minor cleanup to centralize
accesses to pg_database, as well.
attstattarget to indicate 'use the default'. The default is now a GUC
variable default_statistics_target, and so may be changed on the fly. Along
the way we gain the ability to have pg_dump dump the per-column statistics
target when it's not the default. Patch by Neil Conway, with some kibitzing
from Tom Lane.
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
extension to create binary compatible casts. Includes dependency tracking
as well.
pg_proc.proimplicit is now defunct, but will be removed in a separate
commit.
pg_dump provides a migration path from the previous scheme to declare
casts. Dumping binary compatible casts is currently impossible, though.
pg_relcheck is gone; CHECK, UNIQUE, PRIMARY KEY, and FOREIGN KEY
constraints all have real live entries in pg_constraint. pg_depend
exists, and RESTRICT/CASCADE options work on most kinds of DROP;
however, pg_depend is not yet very well populated with dependencies.
(Most of the ones that are present at this point just replace formerly
hardwired associations, such as the implicit drop of a relation's pg_type
entry when the relation is dropped.) Need to add more logic to create
dependency entries, improve pg_dump to dump constraints in place of
indexes and triggers, and add some regression tests.
This is the first cut toward CREATE CONVERSION/DROP CONVERSION implementaion.
The commands can now add/remove tuples to the new pg_conversion system
catalog, but that's all. Still need work to make them actually working.
Documentations, regression tests also need work.
RESTRICT/CASCADE syntax to the DROP commands that need it, and propagates
the behavioral option through the parser to the routines that execute
drops. Doesn't do anything useful yet, but I figured I'd commit these
changes so I could get out of the parser area while working on the rest.
exemplified by bug #671. Moving the storage to relcache turned out to
be a bad idea because relcache might decide to discard the info. Instead,
open and close the relcache entry on each sequence operation, and use
a record of the current XID to discover whether we already hold
AccessShareLock on the sequence.
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
divide backend/commands by object type, let's try to pay at least
minimal attention to respecting that structure, eh? Also reorder the
contents of tablecmds.c; it seems odd to me to put ALTER commands before
creation/deletion commands.
left a stub for a future "ALTER RULE RENAME" but did not write that one
yet. Bruce, if you want to add my name for for that I'll take it and do
it later.
Joe Conway
qualified operator names directly, for example CREATE OPERATOR myschema.+
( ... ). To qualify an operator name in an expression you need to write
OPERATOR(myschema.+) (thanks to Peter for suggesting an escape hatch).
I also took advantage of having to reformat pg_operator to fix something
that'd been bugging me for a while: mergejoinable operators should have
explicit links to the associated cross-data-type comparison operators,
rather than hardwiring an assumption that they are named < and >.
have been divided according to the type of object manipulated - so ALTER
TABLE code is in tablecmds.c, aggregate commands in aggregatecmds.c and
so on.
A few common support routines remain in define.c (prototypes in
src/include/commands/defrem.h).
No code has been changed except for includes to reflect the new files.
The prototypes for aggregatecmds.c, functioncmds.c, operatorcmds.c,
and typecmds.c remain in src/include/commands/defrem.h.
From John Gray <jgray@azuli.co.uk>
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
depend on this rather than the trigger argument strings to locate the
other relation to test. This makes RI triggers function properly in
the presence of schemas and temp tables. Along the way, fix bogus lack
of locking in RI triggers, handle quoting of names fully correctly,
compute required sizes of query buffers with some semblance of accuracy.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
addRangeTableEntry calls. Remove relname field from RTEs, since
it will no longer be a useful unique identifier of relations;
we want to encourage people to rely on the relation OID instead.
Further work on dumping qual expressions in EXPLAIN, too.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
in the current code, the authentication logic (check user, check the
relation we're operating on, etc) is done in tcop/utility.c, whereas the
actual TRUNCATE command in done in TruncateRelation() in
commands/createinh.c (which is really just a wrapper over
heap_truncate() in catalog/heap.c). This patch moves the authentication
logic into TruncateRelation(), as well as making some minor code
cleanups.
Neil Conway
- domain.patch -> source patch against pgsql in cvs
- drop_domain.sgml and create_domain.sgml -> New doc/src/sgml/ref docs
- dominfo.txt -> basic domain related queries I used for testing
[ ADDED TO /doc]
Enables domains of array elements -> CREATE DOMAIN dom int4[3][2];
Uses a typbasetype column to describe the origin of the domain.
Copies data to attnotnull rather than processing in execMain().
Some documentation differences from earlier.
If this is approved, I'll start working on pg_dump, and a \dD <domain>
option in psql, and regression tests. I don't really feel like doing
those until the system table structure settles for pg_type.
CHECKS when added, will also be copied to to the table attributes. FK
Constraints (if I ever figure out how) will be done similarly. Both
will lbe handled by MergeDomainAttributes() which is called shortly
before MergeAttributes().
Rod Taylor
(current as of a few hours ago.)
This patch:
1. Adds PG_GETARG_xxx_P_SLICE() macros and associated support routines.
2. Adds routines in src/backend/access/tuptoaster.c for fetching only
necessary chunks of a toasted value. (Modelled on latest changes to
assume chunks are returned in order).
3. Amends text_substr and bytea_substr to use new methods. It now
handles multibyte cases -and should still lead to a performance
improvement in the multibyte case where the substring is near the
beginning of the string.
4. Added new command: ALTER TABLE tabname ALTER COLUMN colname SET
STORAGE {PLAIN | EXTERNAL | EXTENDED | MAIN} to parser and documented in
alter-table.sgml. (NB I used ColId as the item type for the storage
mode string, rather than a new production - I hope this makes sense!).
All this does is sets attstorage for the specified column.
4. AlterTableAlterColumnStatistics is now AlterTableAlterColumnFlags and
handles both statistics and storage (it uses the subtype code to
distinguish). The previous version of my patch also re-arranged other
code in backend/commands/command.c but I have dropped that from this
patch.(I plan to return to it separately).
5. Documented new macros (and also the PG_GETARG_xxx_P_COPY macros) in
xfunc.sgml. ref/alter_table.sgml also contains documentation for ALTER
COLUMN SET STORAGE.
John Gray
report for each received SQL command, regardless of rewriting activity.
Also ensure that this report comes from the 'original' command, not the
last command generated by rewrite; this fixes 7.2 breakage for INSERT
commands that have actions added by rules. Fernando Nasser and Tom Lane.
Modified the parser and the SET handlers to use full Node structures
rather than simply a character string argument.
Implement INTERVAL() YEAR TO MONTH (etc) syntax per SQL99.
Does not yet accept the goofy string format that goes along with, but
this should be fairly straight forward to fix now as a bug or later
as a feature.
Implement precision for the INTERVAL() type.
Use the typmod mechanism for both of INTERVAL features.
Fix the INTERVAL syntax in the parser:
opt_interval was in the wrong place.
INTERVAL is now a reserved word, otherwise we get reduce/reduce errors.
Implement an explicit date_part() function for TIMETZ.
Should fix coersion problem with INTERVAL reported by Peter E.
Fix up some error messages for date/time types.
Use all caps for type names within message.
Fix recently introduced side-effect bug disabling 'epoch' as a recognized
field for date_part() etc. Reported by Peter E. (??)
Bump catalog version number.
Rename "microseconds" current transaction time field
from ...Msec to ...Usec. Duh!
date/time regression tests updated for reference platform, but a few
changes will be necessary for others.
transformAlterStmt() use these routines, instead of having lots of
duplicate (not to mention should-have-been-duplicate) code.
Adding a column with a CHECK constraint actually works now,
and the tests to reject unsupported DEFAULT and NOT NULL clauses
actually fire now. ALTER TABLE ADD PRIMARY KEY works, modulo
having to have created the column(s) NOT NULL already.
We will no longer try to send elog messages to the client before we have
initialized backend libpq (oops); however, reporting bogus commandline
switches via elog does work now (not irrelevant, because of PGOPTIONS).
Fix problem with inappropriate sending of checkpoint-process messages
to stderr.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
report on old-style functions invoked by RI triggers. We had a number of
other places that were being sloppy about which memory context FmgrInfo
subsidiary data will be allocated in. Turns out none of them actually
cause a problem in 7.1, but this is for arcane reasons such as the fact
that old-style triggers aren't supported anyway. To avoid getting burnt
later, I've restructured the trigger support so that we don't keep trigger
FmgrInfo structs in relcache memory. Some other related cleanups too:
it's not really necessary to call fmgr_info at all while setting up
the index support info in relcache entries, because those ScanKeyEntry
structs are never used to invoke the functions. This should speed up
relcache initialization a tiny bit.
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
to ensure that we have released buffer refcounts and so forth, rather than
putting ad-hoc operations before (some of the calls to) proc_exit. Add
commentary to discourage future hackers from repeating that mistake.
cloned, rather than always cloning template1. Modify initdb to generate
two identical databases rather than one, template0 and template1.
Connections to template0 are disallowed, so that it will always remain
in its virgin as-initdb'd state. pg_dumpall now dumps databases with
restore commands that say CREATE DATABASE foo WITH TEMPLATE = template0.
This allows proper behavior when there is user-added data in template1.
initdb forced!
took some rejiggering of typename and ACL parsing, as well as moving
parse_analyze call out of parser(). Restructure postgres.c processing
so that parse analysis and rewrite are skipped when in abort-transaction
state. Only COMMIT and ABORT statements will be processed beyond the raw
parser() phase. This addresses problem of parser failing with database access
errors while in aborted state (see pghackers discussions around 7/28/00).
Also fix some bugs with COMMIT/ABORT statements appearing in the middle of
a single query input string.
Function, operator, and aggregate arguments/results can now use full
TypeName production, in particular foo[] for array types.
DROP OPERATOR and COMMENT ON OPERATOR were broken for unary operators.
Allow CREATE AGGREGATE to accept unquoted numeric constants for initcond.
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
for example, an SQL function can be used in a functional index. (I make
no promises about speed, but it'll work ;-).) Clean up and simplify
handling of functions returning sets.
pass-by-ref data types --- eg, an index on lower(textfield) --- no longer
leak memory during index creation or update. Clean up a lot of redundant
code ... did you know that copy, vacuum, truncate, reindex, extend index,
and bootstrap each basically duplicated the main executor's logic for
extracting information about an index and preparing index entries?
Functional indexes should be a little faster now too, due to removal
of repeated function lookups.
CREATE INDEX 'opt_type' clause is deimplemented by these changes,
but I haven't removed it from the parser yet (need to merge with
Thomas' latest change set first).
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
option settings. Sort out SIGHUP vs BACKEND -- there is no total ordering
here, so make explicit checks. Add comments explaining all of this.
Removed permissions check on SHOW command.
Add examine_subclass to the game, rename to SQL_inheritance to fit the
official data model better. Adjust documentation.
Standalone backend needs to reset all options before it starts. To
facilitate that, have IsUnderPostmaster be set by the postmaster itself,
don't wait for the magic -p switch.
Also make sure that all environment variables and argv's survive
init_ps_display(). Use strdup where necessary.
Have initdb make configuration files (postgresql.conf, pg_hba.conf) mode
0600 -- having configuration files is no fun if you can't edit them.
quote-stripping, and acl-checking tasks for these functions from the
parser, and do them at function execution time instead. This fixes
the failure of pg_dump to produce correct output for nextval(Foo)
used in a rule, and also eliminates the restriction that the argument
of these functions must be a parse-time constant.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
variable, instead calling same code in variable.c that is used to parse
SET DATESTYLE. Fix bug: although backend's startup datestyle had been
changed to ISO, 'RESET DATESTYLE' and 'SET DATESTYLE TO DEFAULT' didn't
know about it. For consistency I have made the latter two reset to the
PGDATESTYLE-defined initial value, which may not be the same as the
compiled-in default of ISO.
this is an old patch which I have already submitted and never seen
in the sources. It corrects the datatype oids used in some iterator
functions. This bug has been reported to me by many other people.
contrib-datetime.patch
some code contributed by Reiner Dassing <dassing@wettzell.ifag.de>
contrib-makefiles.patch
fixes all my contrib makefiles which don't work with some compilers,
as reported to me by another user.
contrib-miscutil.patch
an old patch for one of my old contribs.
contrib-string.patch
a small change to the c-like text output functions. Now the '{'
is escaped only at the beginning of the string to distinguish it
from arrays, and the '}' is no more escaped.
elog-lineno.patch
adds the current lineno of CopyFrom to elog messages. This is very
useful when you load a 1 million tuples table from an external file
and there is a bad value somehere. Currently you get an error message
but you can't know where is the bad data. The patch uses a variable
which was declared static in copy.c. The variable is now exported
and initialized to 0. It is always cleared at the end of the copy
or at the first elog message or when the copy is canceled.
I know this is very ugly but I can't find any better way of knowing
where the copy fails and I have this problem quite often.
plperl-makefile.patch
fixes a typo in a makefile, but the error must be elsewhere because
it is a file generated automatically. Please have a look.
tprintf-timestamp.patch
restores the original 2-digit year format, assuming that the two
century digits don't carry much information and that '000202' is
easier to read than 20000202. Being only a log file it shouldn't
break anything.
Please apply the patches before the next scheduled code freeze.
I also noticed that some of the contribs don't compile correcly. Should we
ask people to fix their code or rename their makefiles so that they are
ignored by the top makefile?
--
Massimo Dal Zotto
syscache and relcache flushes). Relcache entry rebuild now preserves
original tupledesc, rewrite rules, and triggers if possible, so that pointers
to these things remain valid --- if these things change while relcache entry
has positive refcount, we elog(ERROR) to avoid later crash. Arrange for
xact-local rels to be rebuilt when an SI inval message is seen for them,
so that they are updated by CommandCounterIncrement the same as regular rels.
(This is useful because of Hiroshi's recent changes to process our own SI
messages at CommandCounterIncrement time.) This allows simplification of
some routines that previously hacked around the lack of an automatic update.
catcache now keeps its own copy of tupledesc for its relation, rather than
depending on the relcache's copy; this avoids needing to reinitialize catcache
during a cache flush, which saves some cycles and eliminates nasty circularity
problems that occur if a cache flush happens while trying to initialize a
catcache.
Eliminate a number of permanent memory leaks that used to happen during
catcache or relcache flush; not least of which was that catcache never
freed any cached tuples! (Rule parsetree storage is still leaked, however;
will fix that separately.)
Nothing done yet about code that uses tuples retrieved by SearchSysCache
for longer than is safe.
functions, which would lead to trouble with datatypes that paid attention
to the typelem or typmod parameters to these functions. In particular,
incorrect code in pg_aggregate.c explains the platform-specific failures
that have been reported in NUMERIC avg().
* Let unprivileged users change their own passwords.
* The password is now an Sconst in the parser, which better reflects its text datatype and also
forces users to quote them.
* If your password is NULL you won't be written to the password file, meaning you can't connect
until you have a password set up (if you use password authentication).
* When you drop a user that owns a database you get an error. The database is not gone.
didn't have time for documentation yet, but I'll write some. There are
still some things to work out what happens when you alter or drop users,
but the group stuff in and by itself is done.
--
Peter Eisentraut Sernanders väg 10:115
anywhere from zero to two TODO items.
* Allow flag to control COPY input/output of NULLs
I got this:
COPY table .... [ WITH NULL AS 'string' ]
which does what you'd expect. The default is \N, otherwise you can use
empty strings, etc. On Copy In this acts like a filter: every data item
that looks like 'string' becomes a NULL. Pretty straightforward.
This also seems to be related to
* Make postgres user have a password by default
If I recall this discussion correctly, the problem was actually that the
default password for the postgres (or any) user is in fact "\N", because
of the way copy is used. With this change, the file pg_pwd is copied out
with nulls as empty strings, so if someone doesn't have a password, the
password is just '', which one would expect from a new account. I don't
think anyone really wants a hard-coded default password.
Peter Eisentraut Sernanders väg 10:115
(whoever thought world-writable files were a good default????). Modify
the pg_pwd code so that pg_pwd is created with 600 permissions. Modify
initdb so that permissions on a pre-existing PGDATA directory are not
blindly accepted: if the dir is already there, it does chmod go-rwx
to be sure that the permissions are OK and the dir actually is owned
by postgres.
The following patch extends the COMMENT ON functionality to the
rest of the database objects beyond just tables, columns, and views. The
grammer of the COMMENT ON statement now looks like:
COMMENT ON [
[ DATABASE | INDEX | RULE | SEQUENCE | TABLE | TYPE | VIEW ] <objname>
|
COLUMN <relation>.<attribute> |
AGGREGATE <aggname> <aggtype> |
FUNCTION <funcname> (arg1, arg2, ...) |
OPERATOR <op> (leftoperand_typ rightoperand_typ) |
TRIGGER <triggername> ON relname>
Mike Mascari
(mascarim@yahoo.com)
>From the ORACLE 7 SQL Language Reference Manual:
-----------------------------------------------------
COMMENT
Purpose:
To add a comment about a table, view, snapshot, or
column into the data dictionary.
Prerequisites:
The table, view, or snapshot must be in your own
schema
or you must have COMMENT ANY TABLE system privilege.
Syntax:
COMMENT ON [ TABLE table ] |
[ COLUMN table.column] IS 'text'
You can effectively drop a comment from the database
by setting it to the empty string ''.
-----------------------------------------------------
Example:
COMMENT ON TABLE workorders IS
'Maintains base records for workorder information';
COMMENT ON COLUMN workorders.hours IS
'Number of hours the engineer worked on the task';
to drop a comment:
COMMENT ON COLUMN workorders.hours IS '';
The current patch will simply perform the insert into
pg_description, as per the TODO. And, of course, when
the table is dropped, any comments relating to it
or any of its attributes are also dropped. I haven't
looked at the ODBC source yet, but I do know from
an ODBC client standpoint that the standard does
support the notion of table and column comments.
Hopefully the ODBC driver is already fetching these
values from pg_description, but if not, it should be
trivial.
Hope this makes the grade,
Mike Mascari
(mascarim@yahoo.com)
Implements the CREATE CONSTRAINT TRIGGER and SET CONSTRAINTS commands.
TODO:
Generic builtin trigger procedures
Automatic execution of appropriate CREATE CONSTRAINT... at CREATE TABLE
Support of new trigger type in pg_dump
Swapping of huge # of events to disk
Jan
It will keep track the number of pages allocated so that
vacuum could allocate twice of the previous allocation.
This will greatly reduce the total memory consumption of
vacuum.
neqsel now behave as per my suggestions in pghackers a few days ago.
selectivity for < > <= >= should work OK for integral types as well, but
still need work for nonintegral types. Since these routines have never
actually executed before :-(, this may result in some significant changes
in the optimizer's choices of execution plans. Let me know if you see
any serious misbehavior.
CAUTION: THESE CHANGES REQUIRE INITDB. pg_statistic table has changed.
2. Much faster btree tuples deletion in the case when first on page
index tuple is deleted (no movement to the left page(s)).
3. Remember blkno of new root page in BTPageOpaque of
left/right siblings when root page is splitted.
a field was labelled as a primary key, the system automatically
created a unique index on the field. This patch extends it so
that the index has the indisprimary field set. You can pull a list
of primary keys with the followiing select.
SELECT pg_class.relname, pg_attribute.attname
FROM pg_class, pg_attribute, pg_index
WHERE pg_class.oid = pg_attribute.attrelid AND
pg_class.oid = pg_index.indrelid AND
pg_index.indkey[0] = pg_attribute.attnum AND
pg_index.indisunique = 't';
There is nothing in this patch that modifies the template database to
set the indisprimary attribute for system tables. Should they be
changed or should we only be concerned with user tables?
D'Arcy
> these patches define the UNLISTEN sql command. The code already
> existed but it was unknown to the parser. Now it can be used
> like the listen command.
> You must make clean and delete gram.c and parser.h before make.
> sequence.patch
>
> adds the missing setval command to sequences. Owner of sequences
> can now set the last value to any value between min and max
> without recreating the sequence. This is useful after loading
> data from external files.
if MULTIBYTE is not enabled. So be sure to run initdb.
o these patches are made against the latest source tree (after
Bruce's massive patch, I think) BTW, I noticed that after running
regression, the oid field of pg_type seems disappeared.
regression=> select oid from pg_type; ERROR: attribute
'oid' not found
this happens after the constraints test. This occures with/without
my patches. strange...
o pg_database_mb.h, pg_class_mb.h, pg_attribute_mb.h are no longer
used, and shoud be removed.
o GetDatabaseInfo() in utils/misc/database.c removed (actually in
#ifdef 0). seems nobody uses.
t-ishii@sra.co.jp
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
I have implemented a framework of encoding translation between the
backend and the frontend. Also I have added a new variable setting
command:
SET CLIENT_ENCODING TO 'encoding';
Other features include:
Latin1 support more 8 bit cleaness
See doc/README.mb for more details. Note that the pacthes are
against May 30 snapshot.
Tatsuo Ishii
Patch by: wieck@sapserv.debis.de (Jan Wieck)
One of the design rules of PostgreSQL is extensibility. And
to follow this rule means (at least for me) that there should
not only be a builtin PL. Instead I would prefer a defined
interface for PL implemetations.
Changes:
* Unique index capability works using the syntax 'create unique
index'.
* Duplicate OID's in the system tables are removed. I put
little scripts called 'duplicate_oids' and 'find_oid' in
include/catalog that help to find and remove duplicate OID's.
I also moved 'unused_oids' from backend/catalog to
include/catalog, since it has to be in the same directory
as the include files in order to work.
* The backend tries converting the name of a function or aggregate
to all lowercase if the original name given doesn't work (mostly
for compatibility with ODBC).
* You can 'SELECT NULL' to your heart's content.
* I put my _bt_updateitem fix in instead, which uses
_bt_insertonpg so that even if the new key is so big that
the page has to be split, everything still works.
* All literal references to system catalog OID's have been
replaced with references to define'd constants from the catalog
header files.
* I added a couple of node copy functions. I think this was a
preliminary attempt to get rules to work.
I'm able to get through a 'make' of the backend with no errors except
the occasional 'might not be initialized error', which is nothing major,
just annoying.
Have a few patches from D'Arcy to incorporate, but am waiting until I can
get a clean compile first, which I'm hoping to have before bed, or sometime
tomorrow.
Tom Lane
Bruce Momjian
PostgreSQL Daemon
Peter Eisentraut
Tatsuo Ishii
Thomas G. Lockhart
Vadim B. Mikheev
Philip Warner
Jan Wieck
Hiroshi Inoue
Marc G. Fournier
Bryan Henderson