tuples as needed "to keep VACUUM from complaining", but actually there is
a more compelling reason to do it: failure to do so violates MVCC semantics.
This is because a pre-existing serializable transaction might try to use
the index after we finish (re)building it, and it might fail to find tuples
it should be able to see. We got this mostly right, but not in the case
of partial indexes: the code mistakenly discarded recently-dead tuples for
partial indexes. Fix that, and adjust the comments.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
byte-swapping on the port number which causes the call to fail on Intel
Macs.
This patch uses htons() instead of htonl() and fixes this bug.
Ashley Clark
2005-05-13. When we find that a new inner tuple can't possibly match any
outer tuple (because it contains a NULL), we can't immediately skip the
tuple when we are in NEXTINNER state. Doing so can lead to emitting
multiple copies of the tuple in FillInner mode, because we may rescan the
tuple after returning to a previous marked tuple. Instead, proceed to
NEXTOUTER state the same as we used to do. After we've found that there's
no need to return to the marked position, we can go to SKIPINNER_ADVANCE
state instead of SKIP_TEST when the inner tuple is unmatchable; this
preserves the performance improvement. Per bug report from Bruce.
I also made a couple of cosmetic code rearrangements and added a regression
test for the problem.
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
initdb forced because of change of stored rules.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
similar constants if they were not previously defined. All these
constants must be defined by limits.h according to C89, so we can
safely assume they are present.
case where we run low on array slots before we run low on memory is much
more probable than I had thought, and so it's important to treat each
tape fairly in that case. To fix this, track per-tape slot allocations
just like we track per-tape space allocation. Also, in the FINALMERGE
code path avoid scanning all the input tapes when we really only need to
read from one. This should fix poor behavior with very large work_mem
as exhibited by Stefan Kaltenbrunner.
I didn't do anything about putting an upper bound on the number of tapes,
but maybe we should still consider that.
var_samp(), stddev_pop(), and stddev_samp(). var_samp() and stddev_samp()
are just renamings of the historical Postgres aggregates variance() and
stddev() -- the latter names have been kept for backward compatibility.
This patch includes updates for the documentation and regression tests.
The catversion has been bumped.
NB: SQL2003 requires that DISTINCT not be specified for any of these
aggregates. Per discussion on -patches, I have NOT implemented this
restriction: if the user asks for stddev(DISTINCT x), presumably they
know what they are doing.
performance issue during regular merge passes not only the 'final merge'
case. The original design contemplated that there would never be more
than about one free block per 'tape', hence no need for an efficient
method of keeping the free blocks sorted. But given the later addition
of merge preread behavior in tuplesort.c, there is likely to be about
work_mem worth of free blocks, which is not so small ... and for that
matter the number of tapes isn't necessarily small anymore either. So
we'd better get rid of the assumption entirely. Instead, I'm assuming
that the usage pattern will involve alternation between merge preread
and writing of a new run. This makes it reasonable to just add blocks
to the list without sorting during successive ltsReleaseBlock calls,
and then do a qsort() when we start getting ltsGetFreeBlock() calls.
Experimentation seems to confirm that there aren't many qsort calls
relative to the number of ltsReleaseBlock/ltsGetFreeBlock calls.
we are doing the final merge pass on-the-fly, and not writing the data
back onto a 'tape', the number of free blocks in the tape set will become
large, leading to a lot of time wasted in ltsReleaseBlock(). There is
really no need to track the free blocks anymore in this state, so add a
simple shutoff switch. Per report from Stefan Kaltenbrunner.
(respectively) to rename yylex and related symbols. Some were doing
it this way already, while others used not-too-reliable sed hacks in
the Makefiles. It's all nice and consistent now.
not likely ever to be implemented seeing it's been removed from SQL2003.
This allows getting rid of the 'filter' version of yylex() that we had in
parser.c, which should save at least a few microseconds in parsing.
- new function justify_interval(interval)
- modified function justify_hours(interval)
- modified function justify_days(interval)
These functions are defined to meet the requirements as discussed in
this thread. Specifically:
- justify_hours makes certain the sign bit on the hours
matches the sign bit on the days. It only checks the
sign bit on the days, and not the months, when
determining if the hours should be positive or negative.
After the call, -24 < hours < 24.
- justify_days makes certain the sign bit on the days
matches the sign bit on the months. It's behavior does
not depend on the hours, nor does it modify the hours.
After the call, -30 < days < 30.
- justify_interval makes sure the sign bits on all three
fields months, days, and hours are all the same. After
the call, -24 < hours < 24 AND -30 < days < 30.
Mark Dilger
columns of the grouping clause to avoid redundant sorts. The optimizer
is not currently capable of doing this, so this patch implements a
simple hack in the analysis phase (transformGroupClause): if any
subset of the GROUP BY clause matches a prefix of the ORDER BY list,
that prefix is moved to the front of the GROUP BY clause. This
shouldn't change the semantics of the query, and allows a redundant
sort to be avoided for queries like "GROUP BY a, b ORDER BY b".
In particular, ensure that enlargement of the memtuples[] array doesn't
fall foul of MaxAllocSize when work_mem is very large, and don't bother
enlarging it if that would force an immediate switch into 'tape' mode anyway.
we'll go over to disk-based sort if we reach that limit.
This fixes Stefan Kaltenbrunner's observation that sorting can suffer an
'invalid memory alloc request size' failure when sort_mem is set large
enough. It's unfortunately not so easy to fix in 8.1 ...
relations are still checked for permissions etc as soon as they are
opened. The original form of the patch could hold exclusive lock for a
long time on relations that the user doesn't even have permissions to
access, let alone truncate.
checkpoint in the bgwriter. This forestalls overflow of the fsync request
queue, which is not fatal but causes considerable performance degradation
when it occurs (because backends then have to do their own fsyncs). Per
patch from Itagaki Takahiro, modified a little bit by me.
are unnecessarily allocated on the heap rather than the stack. If the
StringInfo doesn't outlive the stack frame in which it is created,
there is no need to allocate it on the heap via makeStringInfo() --
stack allocation is faster. While it's not a big deal unless the
code is in a critical path, I don't see a reason not to save a few
cycles -- using stack allocation is not less readable.
I also cleaned up a bit of code along the way: moved variable
declarations into a more tightly-enclosing scope where possible,
fixed some pointless copying of strings in dblink, etc.
more compliant with the error message style guide. In particular,
errdetail should begin with a capital letter and end with a period,
whereas errmsg should not. I also fixed a few related issues in
passing, such as fixing the repeated misspelling of "lexeme" in
contrib/tsearch2 (per Tom's suggestion).
creation of a shell type. This allows a less hacky way of dealing with
the mutual dependency between a datatype and its I/O functions: make a
shell type, then make the functions, then define the datatype fully.
We should fix pg_dump to handle things this way, but this commit just deals
with the backend.
Martijn van Oosterhout, with some corrections by Tom Lane.
bits indicating which optional capabilities can actually be exercised
at runtime. This will allow Sort and Material nodes, and perhaps later
other nodes, to avoid unnecessary overhead in common cases.
This commit just adds the infrastructure and arranges to pass the correct
flag values down to plan nodes; none of the actual optimizations are here
yet. I'm committing this separately in case anyone wants to measure the
added overhead. (It should be negligible.)
Simon Riggs and Tom Lane
each tuple, as per my proposal of several days ago. Also, clean up
sort memory management by keeping all working data in a separate memory
context, and refine the handling of low-memory conditions.
the script is not executable as UCS_to_most.pl is in CVS. It also won't
pick up any custom setting of the perl version/location to use. This
patch calls perl scripts like $(PERL) $(srcdir)/script.pl.
Kris Jurka
possible ScanDirection alternatives rather than magic numbers
(-1, 0, 1). Also, use the ScanDirection macros in a few places
rather than directly checking whether `dir == ForwardScanDirection'
and the like. Per patch from James William Pye. His patch also
changed ScanDirection to be a "char" rather than an enum, which
I haven't applied.
allocates the control data. The per-tape buffers are allocated only
on first use. This saves memory in situations where tuplesort.c
overestimates the number of tapes needed (ie, there are fewer runs
than tapes). Also, this makes legitimate the coding in inittapes()
that includes tape buffer space in the maximum-memory calculation:
when inittapes runs, we've already expended the whole allowed memory
on tuple storage, and so we'd better not allocate all the tape buffers
until we've flushed some tuples out of memory.
with fixed merge order (fixed number of "tapes") was based on obsolete
assumptions, namely that tape drives are expensive. Since our "tapes"
are really just a couple of buffers, we can have a lot of them given
adequate workspace. This allows reduction of the number of merge passes
with consequent savings of I/O during large sorts.
Simon Riggs with some rework by Tom Lane
up a bunch of the support utilities.
In src/backend/utils/mb/Unicode remove nearly duplicate copies of the
UCS_to_XXX perl script and replace with one version to handle all generic
files. Update the Makefile so that it knows about all the map files.
This produces a slight difference in some of the map files, using a
uniform naming convention and not mapping the null character.
In src/backend/utils/mb/conversion_procs create a master utf8<->win
codepage function like the ISO 8859 versions instead of having a separate
handler for each conversion.
There is an externally visible change in the name of the win1258 to utf8
conversion. According to the documentation notes, it was named
incorrectly and this changes it to a standard name.
Running the Unicode mapping perl scripts has shown some additional mapping
changes in koi8r and iso8859-7.
we are not holding a buffer content lock; where it was, InterruptHoldoffCount
is positive and so we'd not respond to cancel signals as intended. Also
add missing vacuum_delay_point() call in btvacuumcleanup. This should fix
complaint from Evgeny Gridasov about failure to respond to SIGINT/SIGTERM
in a timely fashion (bug #2257).
Var referencing the subselect output. While this case could possibly be made
to work, it seems not worth expending effort on. Per report from Magnus
Naeslund(f).
id (CVE-2006-0553). Also fix related bug in SET SESSION AUTHORIZATION that
allows unprivileged users to crash the server, if it has been compiled with
Asserts enabled. The escalation-of-privilege risk exists only in 8.1.0-8.1.2.
However, the Assert-crash risk exists in all releases back to 7.3.
Thanks to Akio Ishida for reporting this problem.
comments on cluster global objects like databases, tablespaces, and
roles.
It touches a lot of places, but not much in the way of big changes. The
only design decision I made was to duplicate the query and manipulation
functions rather than to try and have them handle both shared and local
comments. I believe this is simpler for the code and not an issue for
callers because they know what type of object they are dealing with.
This has resulted in a shobj_description function analagous to
obj_description and backend functions [Create/Delete]SharedComments
mirroring the existing [Create/Delete]Comments functions.
pg_shdescription.h goes into src/include/catalog/
Kris Jurka
during the vacuumcleanup scan that we're going to do anyway. Should
save a few cycles (one calculation per page, not per tuple) as well
as not having to depend on assumptions about heap and index being
in step.
I think this could probably be made to work for GIST too, but that
code looks messy enough that I'm disinclined to try right now.
partial. None of the existing AMs do anything useful except counting
tuples when there's nothing to delete, and we can get a tuple count
from the heap as long as it's not a partial index. (hash actually can
skip anyway because it maintains a tuple count in the index metapage.)
GIST is not currently able to exploit this optimization because, due to
failure to index NULLs, GIST is always effectively partial. Possibly
we should fix that sometime.
Simon Riggs w/ some review by Tom Lane.
regardless of the current schema search path. Since CREATE OPERATOR CLASS
only allows one default opclass per datatype regardless of schemas, this
should have minimal impact, and it fixes problems with failure to find a
desired opclass while restoring dump files. Per discussion at
http://archives.postgresql.org/pgsql-hackers/2006-02/msg00284.php.
Remove now-redundant-or-unused code in typcache.c and namespace.c,
and backpatch as far as 8.0.
If the second output column value is 'a\nb', the 'b' should appear
in the second display column, rather than the first column as it
does now.
Change libpq's PQdsplen() to return more useful values.
> Note: this changes the PQdsplen function, it can now return zero or
> minus one which was not possible before. It doesn't appear anyone is
> actually using the functions other than psql but it is a change. The
> functions are not actually documentated anywhere so it's not like we're
> breaking a defined interface. The new semantics follow the Unicode
> standard.
BACKWARD COMPATIBLE CHANGE.
The only user-visible change I saw in the regression tests is that a
SELECT * on a table where all the columns have been dropped doesn't
return a blank line like before. This seems like a step forward.
Martijn van Oosterhout
the format on Tuple(Numeric) and the format to calculate(NumericVar)
are different. I understood that to reduce I/O. However, when many
comparisons or calculations of NUMERIC are executed, the conversion
of Numeric and NumericVar becomes a bottleneck.
It is profile result when "create index on NUMERIC column" is executed:
% cumulative self self total
time seconds seconds calls s/call s/call name
17.61 10.27 10.27 34542006 0.00 0.00 cmp_numerics
11.90 17.21 6.94 34542006 0.00 0.00 comparetup_index
7.42 21.54 4.33 71102587 0.00 0.00 AllocSetAlloc
7.02 25.64 4.09 69084012 0.00 0.00 set_var_from_num
4.87 28.48 2.84 69084012 0.00 0.00 alloc_var
4.79 31.27 2.79 142205745 0.00 0.00 AllocSetFreeIndex
4.55 33.92 2.65 34542004 0.00 0.00 cmp_abs
4.07 36.30 2.38 71101189 0.00 0.00 AllocSetFree
3.83 38.53 2.23 69084012 0.00 0.00 free_var
The create index command executes many comparisons of Numeric values.
Functions other than comparetup_index spent a lot of cycles for
conversion from Numeric to NumericVar.
An attached patch enables the comparison of Numeric values without
executing conversion to NumericVar. The execution time of that SQL
becomes half.
o Test SQL (index_test table has 1,000,000 tuples)
create index index_test_idx on index_test(num_col);
o Test results (executed the test five times)
(1)PentiumIII
original: 39.789s 36.823s 36.737s 37.752s 37.019s
patched : 18.560s 19.103s 18.830s 18.408s 18.853s
4.07 36.30 2.38 71101189 0.00 0.00 AllocSetFree
3.83 38.53 2.23 69084012 0.00 0.00 free_var
The create index command executes many comparisons of Numeric values.
Functions other than comparetup_index spent a lot of cycles for
conversion from Numeric to NumericVar.
An attached patch enables the comparison of Numeric values without
executing conversion to NumericVar. The execution time of that SQL
becomes half.
o Test SQL (index_test table has 1,000,000 tuples)
create index index_test_idx on index_test(num_col);
o Test results (executed the test five times)
(1)PentiumIII
original: 39.789s 36.823s 36.737s 37.752s 37.019s
patched : 18.560s 19.103s 18.830s 18.408s 18.853s
(2)Pentium4
original: 16.349s 14.997s 12.979s 13.169s 12.955s
patched : 7.005s 6.594s 6.770s 6.740s 6.828s
(3)Itanium2
original: 15.392s 15.447s 15.350s 15.370s 15.417s
patched : 7.413s 7.330s 7.334s 7.339s 7.339s
(4)Ultra Sparc
original: 64.435s 59.336s 59.332s 58.455s 59.781s
patched : 28.630s 28.666s 28.983s 28.744s 28.595s
Atsushi Ogawa
would basically punt in all cases for 'foo <> ALL (array)', which resulted
in a performance regression for NOT IN compared to what we were doing in
8.1 and before. Per report from Pavel Stehule.
relations: fix the executor so that we can have an Append plan on the
inside of a nestloop and still pass down outer index keys to index scans
within the Append, then generate such plans as if they were regular
inner indexscans. This avoids the need to evaluate the outer relation
multiple times.
... in fact, it will be applied now in any query whatsoever. I'm still
a bit concerned about the cycles that might be expended in failed proof
attempts, but given that CE is turned off by default, it's the user's
choice whether to expend those cycles or not. (Possibly we should
change the simple bool constraint_exclusion parameter to something
more fine-grained?)
thereby sharing code with the inheritance case. This puts the UNION-ALL-view
approach to partitioned tables on par with inheritance, so far as constraint
exclusion is concerned: it works either way. (Still need to update the docs
to say so.) The definition of "simple UNION ALL" is a little simpler than
I would like --- basically the union arms can only be SELECT * FROM foo
--- but it's good enough for partitioned-table cases.
it later. This fixes a problem where EXEC_BACKEND didn't have progname
set, causing a segfault if log_min_messages was set below debug2 and our
own snprintf.c was being used.
Also alway strdup() progname.
Backpatch to 8.1.X and 8.0.X.
inheritance trees on-the-fly, which pretty well constrained us to considering
only one way of planning inheritance, expand inheritance sets during the
planner prep phase, and build a side data structure that can be consulted
later to find which RTEs are members of which inheritance sets. As proof of
concept, use the data structure to plan joins against inheritance sets more
efficiently: we can now use indexes on the set members in inner-indexscan
joins. (The generated plans could be improved further, but it'll take some
executor changes.) This data structure will also support handling UNION ALL
subqueries in the same way as inheritance sets, but that aspect of it isn't
finished yet.
to avoid sharing substructure with the lower-level indexquals. This is
currently only an issue if there are SubPlans in the indexquals, which is
uncommon but not impossible --- see bug #2218 reported by Nicholas Vinen.
We use the same kluge for indexqual vs indexqualorig in the index scans
themselves ... would be nice to clean this up someday.
requested sort order. It was assuming that build_index_pathkeys always
generates a pathkey per index column, which was not true if implied equality
deduction had determined that two index columns were effectively equated to
each other. Simplest fix seems to be to install an option that causes
build_index_pathkeys to support this behavior as well as the original one.
Per report from Brian Hirt.
While we normally prefer the notation "foo.*" for a whole-row Var, that does
not work at SELECT top level, because in that context the parser will assume
that what is wanted is to expand the "*" into a list of separate target
columns, yielding behavior different from a whole-row Var. We have to emit
just "foo" instead in that context. Per report from Sokolov Yura.
and rely exclusively on the SQL type system to tell the difference between
the types. Prevent creation of invalid CIDR values via casting from INET
or set_masklen() --- both of these operations now silently zero any bits
to the right of the netmask. Remove duplicate CIDR comparison operators,
letting the type rely on the INET operators instead.
just refer to btree index entries as plain IndexTuples, which is what
they have been for a very long time. This is mostly just an exercise
in removing extraneous notation, but it does save a palloc/pfree cycle
per index insertion.
and non-required keys in a btree index scan, mark the required scankeys
with private flag bits SK_BT_REQFWD and/or SK_BT_REQBKWD. This seems
at least marginally clearer to me, and it eliminates a wired-into-the-
data-structure assumption that required keys are consecutive. Even though
that assumption will remain true for the foreseeable future, having it
in there makes the code seem more complex than necessary.
and DELETE. If specified, the alias must be used instead of the full
table name. Also, the alias currently cannot be used in the SET clause
of UPDATE.
Patch from Atsushi Ogawa, various editorialization by Neil Conway.
Along the way, make the rowtypes regression test pass if add_missing_from
is enabled, and add a new (skeletal) regression test for DELETE.
to try to create a log segment file concurrently, but the code erroneously
specified O_EXCL to open(), resulting in a needless failure. Before 7.4,
it was even a PANIC condition :-(. Correct code is actually simpler than
what we had, because we can just say O_CREAT to start with and not need a
second open() call. I believe this accounts for several recent reports of
hard-to-reproduce "could not create file ...: File exists" errors in both
pg_clog and pg_subtrans.
Continue to support GRANT ON [TABLE] for sequences for backward
compatibility; issue warning for invalid sequence permissions.
[Backward compatibility warning message.]
Add USAGE permission for sequences that allows only currval() and
nextval(), not setval().
Mention object name in grant/revoke warnings because of possible
multi-object operations.
temp table not only our own process' tables. It's not real important
since vacuum.c will skip temp tables anyway, but might as well make the
code do what it claims to do.
index's support-function cache (in index_getprocinfo). Since none of that
data can change for an index that's in active use, it seems sufficient to
treat all open indexes the same way we were treating "nailed" system indexes
--- that is, just re-read the pg_class row and leave the rest of the relcache
entry strictly alone. The pg_class re-read might not be strictly necessary
either, but since the reltablespace and relfilenode can change in normal
operation it seems safest to do it. (We don't support changing any of the
other info about an index at all, at the moment.)
Back-patch as far as 8.0. It might be possible to adapt the patch to 7.4,
but it would take more work than I care to expend for such a low-probability
problem. 7.3 is out of luck for sure.
occurs when it tries to heap_open pg_tablespace. When control returns to
smgrcreate, that routine will be holding a dangling pointer to a closed
SMgrRelation, resulting in mayhem. This is of course a consequence of
the violation of proper module layering inherent in having smgr.c call
a tablespace command routine, but the simplest fix seems to be to change
the locking mechanism. There's no real need for TablespaceCreateDbspace
to touch pg_tablespace at all --- it's only opening it as a way of locking
against a parallel DROP TABLESPACE command. A much better answer is to
create a special-purpose LWLock to interlock these two operations.
This drops TablespaceCreateDbspace quite a few layers down the food chain
and makes it something reasonably safe for smgr to call.
This is utterly insignificant in normal operation, but it becomes a
problem during cache inval stress testing. The original coding in fact
had no leak --- the 8.0 List rewrite created the issue. I wonder whether
list_concat should pfree the discarded header?
files: avoid creating stats hashtable entries for tables that aren't being
touched except by vacuum/analyze, ensure that entries for dropped tables are
removed promptly, and tweak the data layout to avoid storing useless struct
padding. Also improve the performance of pgstat_vacuum_tabstat(), and make
sure that autovacuum invokes it exactly once per autovac cycle rather than
multiple times or not at all. This should cure recent complaints about 8.1
showing much higher stats I/O volume than was seen in 8.0. It'd still be a
good idea to revisit the design with an eye to not re-writing the entire
stats dataset every half second ... but that would be too much to backpatch,
I fear.
cursors. Patch from Joachim Wieland, review and ediorialization by Neil
Conway. The view lists cursors defined by DECLARE CURSOR, using SPI, or
via the Bind message of the frontend/backend protocol. This means the
view does not list the unnamed portal or the portal created to implement
EXECUTE. Because we do list SPI portals, there might be more rows in
this view than you might expect if you are using SPI implicitly (e.g.
via a procedural language).
Per recent discussion on -hackers, the query string included in the
view for cursors defined by DECLARE CURSOR is based on
debug_query_string. That means it is not accurate if multiple queries
separated by semicolons are submitted as one query string. However,
there doesn't seem a trivial fix for that: debug_query_string
is better than nothing. I also changed SPI_cursor_open() to include
the source text for the portal it creates: AFAICS there is no reason
not to do this.
Update the documentation and regression tests, bump the catversion.
are two basically different kinds of scankeys, and we ought to try harder
to indicate which is used in each place in the code. I've chosen the names
"search scankey" and "insertion scankey", though you could make about
as good an argument for "operator scankey" and "comparison function
scankey".
an array of regtype, rather than an array of OIDs. This is likely to
be more useful to user, and the type OID can easily be obtained by
casting a regtype value to OID. Per suggestion from Tom.
Update the documentation and regression tests, and bump the catversion.
data type is unspecified or is declared to be "unknown", the type will
be inferred from the context in which the parameter is used. This was
already possible for protocol-level prepared statements.
isn't being used anywhere anymore, and there seems no point in a generic
index_keytest() routine when two out of three remaining access methods
aren't using it. Also, add a comment documenting a convention for
letting access methods define private flag bits in ScanKey sk_flags.
There are no such flags at the moment but I'm thinking about changing
btree's handling of "required keys" to use flag bits in the keys
rather than a count of required key positions. Also, if some AM did
still want SK_NEGATE then it would be reasonable to treat it as a private
flag bit.
transaction as aborted. Since we only call XactLockTableWait on XIDs
that we believe to be currently running, the odds of this code ever
actually firing are minimal. It's certainly unnecessary, since a
transaction that's not either running or committed will be presumed
aborted anyway. What's more, it's not hard to imagine scenarios where
this could result in corrupting pg_clog: for instance, if a bogus XID
somehow got passed to XactLockTableWait. I think the code probably
dates from the ancient era when we didn't have TransactionIdIsInProgress;
back then it may have been necessary, but now I think it's a waste of
cycles and potentially dangerous. Per discussion with Qingqing Zhou
and Karsten Hilbert.
permissions on the functions and operators contained in the opclass.
Since we already require superuser privilege to create an operator class,
there's no expansion-of-privilege hazard here, but if someone were to get
the idea of building an opclass containing functions that need security
restrictions, we'd better warn them off. Also, change the permission
checks from have-execute-privilege to have-ownership, and then comment
them all out since they're dead code anyway under the superuser restriction.
type definition. Because use of a type's I/O conversion functions isn't
access-checked, CREATE TYPE amounts to granting public execute permissions
on the functions, and so allowing it to anybody means that someone could
theoretically gain access to a function he's not supposed to be able to
execute. The parameter-type restrictions already enforced by CREATE TYPE
make it fairly unlikely that this oversight is meaningful in practice,
but still it seems like a good idea to plug the hole going forward.
Also, document the implicit grant just in case anybody gets the idea of
building I/O functions that might need security restrictions.
fmgr_info(), in the TopMemoryContext. I couldn't see that the code
actually leaked, but in general I think it's fragile to assume that
pfree'ing an FmgrInfo along with its fn_extra field is enough to
reclaim all the resources allocated by fmgr_info(). I changed the
code to do its allocations in a new child context of
TopMemoryContext, MbProcContext. When we want to release the
allocations we can just reset the context, which is cleaner.
our own command (or more generally, xmin = our xact and cmin >= current
command ID) should not be seen as good. Else we may try to update rows
we already updated. This error was inserted last August while fixing the
even bigger problem that the old coding wouldn't see *any* tuples inserted
by our own transaction as good. Per report from Euler Taveira de Oliveira.
rather than "return expr;" -- the latter style is used in most of the
tree. I kept the parentheses when they were necessary or useful because
the return expression was complex.
listed in the column's most-common-values statistics entry. This gives
us an exact selectivity result for the portion of the column population
represented by the MCV list, which can be a big leg up in accuracy if
that's a large fraction of the population. The heuristics involving
pattern contents and prefix are applied only to the part of the population
not included in the MCV list.
and nail a couple more system indexes into cache. This doesn't make
any difference in normal system operation, but when forcing constant
cache resets it's difficult to get through the rules regression test
without these changes.
access information about the prepared statements that are available
in the current session. Original patch from Joachim Wieland, various
improvements by Neil Conway.
The "statement" column of the view contains the literal query string
sent by the client, without any rewriting or pretty printing. This
means that prepared statements created via SQL will be prefixed with
"PREPARE ... AS ", whereas those prepared via the FE/BE protocol will
not. That is unfortunate, but discussion on -patches did not yield an
efficient way to improve this, and there is some merit in returning
exactly what the client sent to the backend.
Catalog version bumped, regression tests updated.
use it. While it normally has been opened earlier during btree index
build, testing shows that it's possible for the link to be closed again
if an sinval reset occurs while the index is being built.
dead and have become unreferenced. Before 8.1, such members were left
for AtEOXact_CatCache() to clean up, but now AtEOXact_CatCache isn't
supposed to have anything to do. In an assert-enabled build this bug
leads to an assertion failure at transaction end, but in a non-assert
build the dead member is effectively just a small memory leak.
Per report from Jeremy Drake.
rather than elog(FATAL), when there is no more room in ShmemBackendArray.
This is a security issue since too many connection requests arriving close
together could cause the postmaster to shut down, resulting in denial of
service. Reported by Yoshiyuki Asaba, fixed by Magnus Hagander.
the relation but it finds a pre-existing valid buffer. The buffer does not
correspond to any page known to the kernel, so we *must* do smgrextend to
ensure that the space becomes allocated. The 7.x branches all do this
correctly, but the corner case got lost somewhere during 8.0 bufmgr rewrites.
(My fault no doubt :-( ... I think I assumed that such a buffer must be
not-BM_VALID, which is not so.)
an LWLock instead of a spinlock. This hardly matters on Unix machines
but should improve startup performance on Windows (or any port using
EXEC_BACKEND). Per previous discussion.
from Andrus Moor. The former state-machine-style coding wasn't actually
doing much except obscuring the control flow, and it didn't extend
readily to fix this case, so I just took it out. Also, add a
YY_FLUSH_BUFFER call to ensure the lexer is reset correctly if the
previous scan failed partway through the file.
selection of a field from the result of a function returning RECORD.
I believe this case is new in 8.1; it's due to the addition of OUT parameters.
Per example from Michael Fuhr.
in favor of having just one set of macros that don't do HOLD/RESUME_INTERRUPTS
(hence, these correspond to the old SpinLockAcquire_NoHoldoff case).
Given our coding rules for spinlock use, there is no reason to allow
CHECK_FOR_INTERRUPTS to be done while holding a spinlock, and also there
is no situation where ImmediateInterruptOK will be true while holding a
spinlock. Therefore doing HOLD/RESUME_INTERRUPTS while taking/releasing a
spinlock is just a waste of cycles. Qingqing Zhou and Tom Lane.
setup. This protects against undesired changes in locale behavior
if someone carelessly does setlocale(LC_ALL, "") (and we know who
you are, perl guys).
get_func_arg_info() for consistency with other names there.
This code will probably be useful to other PLs when they start to
support OUT parameters, so better to have it in the main backend.
Also, fix plpgsql validator to detect bogus OUT parameters even when
check_function_bodies is off.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
if (c == '\\' && cstate->line_buf.len == 0)
The problem with that is the because of the input and _output_
buffering, cstate->line_buf.len could be zero even if we are not on the
first character of a line. In fact, for a typical line, it is zero for
all characters on the line. The proper solution is to introduce a
boolean, first_char_in_line, that we set as we enter the loop and clear
once we process a character.
I have restructured the line-reading code in copy.c by:
o merging the CSV/non-CSV functions into a single function
o used macros to centralize and clarify the buffering code
o updated comments
o renamed client_encoding_only to encoding_embeds_ascii
o added a high-bit test to the encoding_embeds_ascii test for
performance
o in CSV mode, allow a backslash followed by a non-period to
continue being processed as a data value
There should be no performance impact from this patch because it is
functionally equivalent. If you apply the patch you will see copy.c is
much clearer in this area now and might suggest additional
optimizations.
I have also attached a 8.1-only patch to fix the CSV \. handling bug
with no code restructuring.
#define HIGHBIT (0x80)
#define IS_HIGHBIT_SET(ch) ((unsigned char)(ch) & HIGHBIT)
and removed CSIGNBIT and mapped it uses to HIGHBIT. I have also added
uses for IS_HIGHBIT_SET where appropriate. This change is
purely for code clarity.
See:
Subject: [HACKERS] bugs with certain Asian multibyte charsets
From: Tatsuo Ishii <ishii@sraoss.co.jp>
To: pgsql-hackers@postgresql.org
Date: Sat, 24 Dec 2005 18:25:33 +0900 (JST)
for more details/
Also make the code more robust by searching for target encoding
in the internal charset map.
Problem reported by Sagi Bashari on 2005/12/21.
See "[BUGS] BUG #2120: Crash when doing UTF8<->ISO_8859_8 encoding conversion"
on pgsql-bugs list for more details.
equal: if strcoll claims two strings are equal, check it with strcmp, and
sort according to strcmp if not identical. This fixes inconsistent
behavior under glibc's hu_HU locale, and probably under some other locales
as well. Also, take advantage of the now-well-defined behavior to speed up
texteq, textne, bpchareq, bpcharne: they may as well just do a bitwise
comparison and not bother with strcoll at all.
NOTE: affected databases may need to REINDEX indexes on text columns to be
sure they are self-consistent.
Per my recent proposal. I ended up basing the implementation on the
existing mechanism for enforcing valid join orders of IN joins --- the
rules for valid outer-join orders are somewhat similar.
file. The original code probed the PGPROC array separately for each PID,
which was not good for large numbers of backends: not only is the runtime
O(N^2) but most of it is spent holding ProcArrayLock. Instead, take the
lock just once and copy the active PIDs into an array, then use qsort
and bsearch so that the lookup time is more like O(N log N).
messages, when client attempts to execute these outside a transaction (start
one) or in a failed transaction (reject message, except for COMMIT/ROLLBACK
statements which we can handle). Per report from Francisco Figueiredo Jr.
reduce contention for the former single LockMgrLock. Per my recent
proposal. I set it up for 16 partitions, but on a pgbench test this
gives only a marginal further improvement over 4 partitions --- we need
to test more scenarios to choose the number of partitions.
that simplify_boolean_equality() may leave behind. This is only relevant
if the user writes something a bit silly, like CASE x=y WHEN TRUE THEN.
Per example from Michael Fuhr; may or may not explain bug #2106.
the data defining the semantics of a lock method (ie, conflict resolution
table and ancillary data, which is all constant) and the hash tables
storing the current state. The only thing we give up by this is the
ability to use separate hashtables for different lock methods, but there
is no need for that anyway. Put some extra fields into the LockMethod
definition structs to clean up some other uglinesses, like hard-wired
tests for DEFAULT_LOCKMETHOD and USER_LOCKMETHOD. This commit doesn't
do anything about the performance issues we were discussing, but it clears
away some of the underbrush that's in the way of fixing that.
_bt_checkkeys(), instead of checking it in the top-level nbtree.c routines
as formerly. This saves a little bit of loop overhead, but more importantly
it lets us skip performing the index key comparisons for dead tuples.
checks, which were once needed because PageGetMaxOffsetNumber would
fail on empty pages, but are now just redundant. Also, don't set up
local variables that aren't needed in the fast path --- most of the
time, we only need to advance offnum and not step across a page boundary.
Motivated by noticing _bt_step at the top of OProfile profile for a
pgbench run.
SLRU area. The number of slots is still a compile-time constant (someday
we might want to change that), but at least it's a different constant for
each SLRU area. Increase number of subtrans buffers to 32 based on
experimentation with a heavily subtrans-bashing test case, and increase
number of multixact member buffers to 16, since it's obviously silly for
it not to be at least twice the number of multixact offset buffers.
lock, not exclusive, if the desired page is already in memory. This can
be demonstrated to be a significant win on the pg_subtrans cache when there
is a large window of open transactions. It should be useful for pg_clog
as well. I didn't try to make GetMultiXactIdMembers() use the code, as
that would have taken some restructuring, and what with the local cache
for multixact contents it probably wouldn't really make a difference.
Per my recent proposal.
clauses even if it's an outer join. This is a corner case since such
clauses could only arise from weird OUTER JOIN ON conditions, but worth
fixing. Per example from Ron at cheapcomplexdevices.com.
Map them to a single day, so '30 hours' is 'AM'.
Have to_char(interval) and to_char(time) use "HH", "HH12" as 12-hour
intervals, rather than bypass and print the full interval hours. This
is neeeded because to_char(time) is mapped to interval in this function.
Intervals should use "HH24", and document suggestion.
Allow "D" format specifiers for interval/time.
if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
relation if it's already been locked by execMain.c as either a result
relation or a FOR UPDATE/SHARE relation. This avoids an extra trip to
the shared lock manager state. Per my suggestion yesterday.
child plan nodes until we have acquired lock on the relation to scan.
The relative order of initialization of plan nodes isn't real important in
other cases, but it's critical here because one is supposed to lock a
relation before its indexes, not vice versa. The original coding was at
least vulnerable to deadlock against DROP INDEX, and perhaps worse things.
Also add a retry for Unixen returning EINTR, which hasn't been reported
as an issue but at least theoretically could be. Patch by Qingqing Zhou,
some minor adjustments by me.
#2075: consider an index redundant if any of its index conditions were already
used, rather than if all of them were. Also, make the selectivity comparison
a bit fuzzy, so that very small differences in estimated selectivities don't
skew the results.
it's worth probing the outer relation for emptiness before building the
hash table. To wit, if we're rescanning a join previously performed,
remember whether we found it nonempty the previous time, and don't bother
with the probe if it was nonempty. This buys back the performance lost
in examples like Mario Weilguni's.
one child or the other had a problem: they did not leave the node in a
state that ExecReScanHashJoin would understand. In particular it would
tend to fail to reset the child plans when needed. Per report from
Mario Weilguni.
ScalarArrayOpExpr when possible, that is, whenever there is an array type
for the values of the expression list. This completes the project I've
been working on to improve the speed of index searches with long IN lists,
as per discussion back in mid-October.
I did not force initdb, but until you do one you will see failures in the
"rules" regression test, because some of the standard system views use IN
and their compiled formats have changed.
they were broken-out AND or OR lists. The least grotty way to do this
seemed to be to set up a general mechanism for handling nodes as though
they were ANDs or ORs. There's no other immediate use for it, but perhaps
we might want to use the mechanism someday for things like BETWEEN
SYMMETRIC.
"ctid IN (list)" will still work after we convert IN to ScalarArrayOpExpr.
Make some minor efficiency improvements while at it, such as ensuring that
multiple TIDs are fetched in physical heap order. And fix EXPLAIN so that
it shows what's really going on for a TID scan.
when we first read the page, rather than checking them one at a time.
This allows us to take and release the buffer content lock just once
per page, instead of once per tuple. Since it's a shared lock the
contention penalty for holding the lock longer shouldn't be too bad.
We can safely do this only when using an MVCC snapshot; else the
assumption that visibility won't change over time is uncool. Therefore
there are now two code paths depending on the snapshot type. I also
made the same change in nodeBitmapHeapscan.c, where it can be done always
because we only support MVCC snapshots for bitmap scans anyway.
Also make some incidental cleanups in the APIs of these functions.
Per a suggestion from Qingqing Zhou.
qualification when the underlying operator is indexable and useOr is true.
That is, indexkey op ANY (ARRAY[...]) is effectively translated into an
OR combination of one indexscan for each array element. This only works
for bitmap index scans, of course, since regular indexscans no longer
support OR'ing of scans. There are still some loose ends to clean up
before changing 'x IN (list)' to translate as a ScalarArrayOpExpr;
for instance predtest.c ought to be taught about it. But this gets the
basic functionality in place.
a TupleTableSlot: instead of calling ExecClearTuple, inline the needed
operations, so that we can avoid redundant steps. In particular, when
the old and new tuples are both on the same disk page, avoid releasing
and re-acquiring the buffer pin --- this saves work in both the bufmgr
and ResourceOwner modules. To make this improvement actually useful,
partially revert a change I made on 2004-04-21 that caused SeqNext
et al to call ExecClearTuple before ExecStoreTuple. The motivation
for that, to avoid grabbing the BufMgrLock separately for releasing
the old buffer and grabbing the new one, no longer applies. My
profiling says that this saves about 5% of the CPU time for an
all-in-memory seqscan.
generate their output tuple descriptors from their target lists (ie, using
ExecAssignResultTypeFromTL()). We long ago fixed things so that all node
types have minimally valid tlists, so there's no longer any good reason to
have two different ways of doing it. This change is needed to fix bug
reported by Hayden James: the fix of 2005-11-03 to emit the correct column
names after optimizing away a SubqueryScan node didn't work if the new
top-level plan node used ExecAssignResultTypeFromOuterPlan to generate its
tupdesc, since the next plan node down won't have the correct column labels.
a SubLink expression into a rule query. Pre-8.1 we essentially did this
unconditionally; 8.1 tries to do it only when needed, but was missing a
couple of cases. Per report from Kyle Bateman. Add some regression test
cases covering this area.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
Tom Lane
Neil Conway
Bruce Momjian
Tatsuo Ishii
Peter Eisentraut
Andrew Dunstan
Alvaro Herrera