Prefix inet_net_ntop and sibling routines with "pg_" to ensure that
they aren't mistaken for C-library functions. This fixes warnings
from cpluspluscheck on some platforms, and should help reduce reader
confusion everywhere, since our functions aren't exactly interchangeable
with the library versions (they may have different ideas about address
family codes).
This shouldn't be fixing any actual bugs, unless somebody's linker
is misbehaving, so no need to back-patch.
Discussion: https://postgr.es/m/20518.1559494394@sss.pgh.pa.us
Remove use of "register" keyword in hashfn.c. It's obsolescent
according to recent C++ compilers, and no modern C compiler pays
much attention to it either.
Also fix one cosmetic warning about signed vs unsigned comparison.
Discussion: https://postgr.es/m/20518.1559494394@sss.pgh.pa.us
If a table inherits from multiple unrelated parents, we must disallow
changing the type of a column inherited from multiple such parents, else
it would be out of step with the other parents. However, it's possible
for the column to ultimately be inherited from just one common ancestor,
in which case a change starting from that ancestor should still be
allowed. (I would not be excited about preserving that option, were
it not that we have regression test cases exercising it already ...)
It's slightly annoying that this patch looks different from the logic
with the same end goal in renameatt(), and more annoying that it
requires an extra syscache lookup to make the test. However, the
recursion logic is quite different in the two functions, and a
back-patched bug fix is no place to be trying to unify them.
Per report from Manuel Rigger. Back-patch to 9.5. The bug exists in
9.4 too (and doubtless much further back); but the way the recursion
is done in 9.4 is a good bit different, so that substantial refactoring
would be needed to fix it in 9.4. I'm disinclined to do that, or risk
introducing new bugs, for a bug that has escaped notice for this long.
Discussion: https://postgr.es/m/CA+u7OA4qogDv9rz1HAb-ADxttXYPqQdUdPY_yd4kCzywNxRQXA@mail.gmail.com
For most uses of acl.h the details of how "Acl" internally looks like
are irrelevant. It might make sense to move a lot of the
implementation details into a separate header at a later point.
The main motivation of this change is to avoid including fmgr.h (via
array.h, which needs it for exposed structs) in a lot of files that
otherwise don't need it. A subsequent commit will remove the fmgr.h
include from a lot of files.
Directly include utils/array.h and utils/expandeddatum.h from the
files that need them, but previously included them indirectly, via
acl.h.
Author: Andres Freund
Discussion: https://postgr.es/m/20190803193733.g3l3x3o42uv4qj7l@alap3.anarazel.de
Commit 4b93f5799 rearranged things in plpgsql to make it cope better with
composite types changing underneath it intra-session. However, I failed to
consider the case of a composite type being dropped and recreated entirely.
In my defense, the previous coding didn't consider that possibility at all
either --- but it would accidentally work so long as you didn't change the
type's field list, because the built-at-compile-time list of component
variables would then still match the type's new definition. The new
coding, however, occasionally tries to re-look-up the type by OID, and
then fails to find the dropped type.
To fix this, we need to save the TypeName struct, and then redo the type
OID lookup from that. Of course that's expensive, so we don't want to do
it every time we need the type OID. This can be fixed in the same way that
4b93f5799 dealt with changes to composite types' definitions: keep an eye
on the type's typcache entry to see if its tupledesc has been invalidated.
(Perhaps, at some point, this mechanism should be generalized so it can
work for non-composite types too; but for now, plpgsql only tries to
cope with intra-session redefinitions of composites.)
I'm slightly hesitant to back-patch this into v11, because it changes
the contents of struct PLpgSQL_type as well as the signature of
plpgsql_build_datatype(), so in principle it could break code that is
poking into the innards of plpgsql. However, the only popular extension
of that ilk is pldebugger, and it doesn't seem to be affected. Since
this is a regression for people who were relying on the old behavior,
it seems worth taking the small risk of causing compatibility issues.
Per bug #15913 from Daniel Fiori. Back-patch to v11 where 4b93f5799
came in.
Discussion: https://postgr.es/m/15913-a7e112e16dedcffc@postgresql.org
Previously, async.c got rid of duplicate notifications by scanning
the list of pending events to compare each one to the proposed new
event. This works okay for very small numbers of distinct events,
but degrades as O(N^2) for many events. We can improve matters by
using a hash table to probe for duplicates. So as not to add a
lot of overhead for the simple cases that the code did handle well
before, create the hash table only once a (sub)transaction has
queued more than 16 distinct notify events.
A downside is that we now have to do per-event work to propagate
a successful subtransaction's notify events up to its parent.
(But this isn't significant unless the subtransaction had many
events, in which case the O(N^2) behavior would have been in
play already, so we still come out ahead.)
We can make some lemonade out of this lemon, though: since we must
examine each event anyway, it's now possible to de-duplicate events
fully, rather than skipping that for events merged up from
subtransactions. Hence, remove the old weasel wording in notify.sgml
about whether de-duplication happens or not, and adjust the test
case in async-notify.spec that exhibited the old behavior.
While at it, rearrange the definition of struct Notification to make
it more compact and require just one palloc per event, rather than
two or three. This saves space when there are a lot of events,
in fact more than enough to buy back the space needed for the hash
table.
Patch by me, based on discussions around a different patch
submitted by Filip Rembiałkowski.
Discussion: https://postgr.es/m/17822.1564186806@sss.pgh.pa.us
ALTER SYSTEM itself normally won't make duplicate entries (although
up till this patch, it was possible to confuse it by writing case
variants of a GUC's name). However, if some external tool has appended
entries to the file, that could result in duplicate entries for a single
GUC name. In such a situation, ALTER SYSTEM did exactly the wrong thing,
because it replaced or removed only the first matching entry, leaving
the later one(s) still there and hence still determining the active value.
This patch fixes that by making ALTER SYSTEM sweep through the file and
remove all matching entries, then (if not ALTER SYSTEM RESET) append the
new setting to the end. This means entries will be in order of last
setting rather than first setting, but that shouldn't hurt anything.
Also, make the comparisons case-insensitive so that the right things
happen if you do, say, ALTER SYSTEM SET "TimeZone" = 'whatever'.
This has been broken since ALTER SYSTEM was invented, so back-patch
to all supported branches.
Ian Barwick, with minor mods by me
Discussion: https://postgr.es/m/aed6cc9f-98f3-2693-ac81-52bb0052307e@2ndquadrant.com
The initial value of the nbtree stack downlink block number field
recorded during an initial descent of the tree wasn't actually used.
Both _bt_getstackbuf() callers overwrote the value with their own value.
Remove the block number field from the stack struct, and add a child
block number argument to _bt_getstackbuf() in its place. This makes the
overall design of _bt_getstackbuf() clearer.
Author: Peter Geoghegan
Reviewed-By: Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wzmx+UbXt2YNOUCZ-a04VdXU=S=OHuAuD7Z8uQq-PXTYUg@mail.gmail.com
Commit d2086b08b0 removed almost all cases where nbtree must release a
read buffer lock and acquire a write buffer lock instead, so remaining
cases in which that's still necessary are not notable enough to appear
in the nbtree README.
More importantly, holding on to a buffer pin in cases where nbtree must
trade a read lock for a write lock is very unlikely to save any I/O.
This seems to have been a long overlooked throwback to a time when
nbtree cared about write-ordering dependencies, and performed
synchronous buffer writes. It hasn't worked that way in many years.
Use the PageIndexTupleOverwrite() bufpage.c routine within nbtree
instead of deleting a tuple and re-inserting its replacement. This
makes the intent of affected code slightly clearer. It also makes
CREATE INDEX slightly faster, since there is no longer a need to shift
every leaf page's line pointer array back and forth during index builds.
Author: Peter Geoghegan, Anastasia Lubennikova
Reviewed-By: Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wz=Zk=B9+Vwm376WuO7YTjFc2SSskifQm4Nme3RRRPtOSQ@mail.gmail.com
We only need to invoke constraint exclusion on partitioned tables when
they are a partition, and they themselves contain a default partition;
it's not necessary otherwise, and it's expensive, so avoid it. Also, we
were trying once for each clause separately, but we can do it for all
the clauses at once.
While at it, centralize setting of RelOptInfo->partition_qual instead of
computing it in slightly different ways in different places.
Per complaints from Simon Riggs about 4e85642d935e; reviewed by Yuzuko
Hosoya, Kyotaro Horiguchi.
Author: Amit Langote. I (Álvaro) again mangled the patch somewhat.
Discussion: https://postgr.es/m/CANP8+j+tMCY=nEcQeqQam85=uopLBtX-2vHiLD2bbp7iQQUKpA@mail.gmail.com
As coded, the ICU-collation path in pattern_char_isalpha() failed
to consider regular ASCII letters to be case-varying. This led to
like_fixed_prefix treating too much of an ILIKE pattern as being a
fixed prefix, so that indexscans derived from an ILIKE clause might
miss entries that they should find.
Per bug #15892 from James Inform. This is an oversight in the original
ICU patch (commit eccfef81e), so back-patch to v10 where that came in.
Discussion: https://postgr.es/m/15892-e5d2bea3e8a04a1b@postgresql.org
Now that list_nth is O(1), there's no good reason to maintain a
separate array of RTE pointers rather than indexing into
estate->es_range_table. Deleting the array doesn't save all that
much either; but just on cleanliness grounds, it's better not to
have duplicate representations of the identical information.
Discussion: https://postgr.es/m/14960.1565384592@sss.pgh.pa.us
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
We have implemented jsonpath string comparison using default database locale.
However, standard requires us to compare Unicode codepoints. This commit
implements that, but for performance reasons we still use per-byte comparison
for "==" operator. Thus, for consistency other comparison operators do per-byte
comparison if Unicode codepoints appear to be equal.
In some edge cases, when same Unicode codepoints have different binary
representations in database encoding, we diverge standard to achieve better
performance of "==" operator. In future to implement strict standard
conformance, we can do normalization of input JSON strings.
Original patch was written by Nikita Glukhov, rewritten by me.
Reported-by: Markus Winand
Discussion: https://postgr.es/m/8B7FA3B4-328D-43D7-95A8-37B8891B8C78%40winand.at
Author: Nikita Glukhov, Alexander Korotkov
Backpatch-through: 12
This failed with either "tuple already updated by self" or "duplicate
key value violates unique constraint", depending on whether the table
had previously been analyzed or not. The reason is that ANALYZE tried
to insert or update the same pg_statistic rows twice, and there was no
CommandCounterIncrement between. So add one. The same case works fine
outside a transaction block, because then there's a whole transaction
boundary between, as a consequence of the way VACUUM works.
This issue has been latent all along, but the problem was unreachable
before commit 11d8d72c2 added the ability to specify multiple tables
in ANALYZE. We could, perhaps, alternatively fix it by adding code to
de-duplicate the list of VacuumRelations --- but that would add a
lot of overhead to work around dumb commands, so it's not attractive.
Per bug #15946 from Yaroslav Schekin. Back-patch to v11.
(Note: in v11 I also back-patched the test added by commit 23224563d;
otherwise the problem doesn't manifest in the test I added, because
"vactst" is empty when the tests for multiple ANALYZE targets are
reached. That seems like not a very good thing anyway, so I did this
rather than rethinking the choice of test case.)
Discussion: https://postgr.es/m/15946-5c7570a2884a26cf@postgresql.org
Rename the "tupindex" field from tuplesort.c's SortTuple struct to
"srctape", since it can only ever be used to store a source/input tape
number when merging external sort runs. This has been the case since
commit 8b304b8b72, which removed replacement selection sort from
tuplesort.c.
Merge setup_append_rel_array into setup_simple_rel_arrays. There's no
particularly good reason to keep them separate, and it's inconsistent
with the lack of separation in expand_planner_arrays. The only apparent
benefit was that the fast path for trivial queries in query_planner()
doesn't need to set up the append_rel_array; but all we're saving there
is an if-test and NULL assignment, which surely ought to be negligible.
Also improve some obsolete comments.
Discussion: https://postgr.es/m/17220.1565301350@sss.pgh.pa.us
b654714 has reworked the way trailing CR/LF characters are removed from
strings. This commit introduces a new routine in common/string.c and
refactors the code so as the logic is in a single place, mostly.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/20190801031820.GF29334@paquier.xyz
READTUP() routines do not and cannot use the resettable "tuplecontext"
memory context, since it is deleted when merging begins. Update an
obsolete comment that claimed otherwise. This was an oversight in
commit e94568ecc1.
In passing, fix an unrelated tuplesort typo.
We were applying constraint exclusion on the partition constraint when
generating pruning steps for a clause, but only for the rather
restricted situation of them being boolean OR operators; however it is
possible to have differently shaped clauses that also benefit from
constraint exclusion. This applies particularly to the default
partition since their constraints are in essence a long list of OR'ed
subclauses ... but it applies to other cases too. So in certain cases
we're scanning partitions that we don't need to.
Remove the specialized code in OR clauses, and add a generally
applicable test of the clause refuting the partition constraint; mark
the whole pruning operation as contradictory if it hits.
This has the unwanted side-effect of testing some (most? all?)
constraints more than once if constraint_exclusion=on. That seems
unavoidable as far as I can tell without some additional work, but
that's not the recommended setting for that parameter anyway.
However, because this imposes additional processing cost for all
queries using partitioned tables, I decided not to backpatch this
change.
Author: Amit Langote, Yuzuko Hosoya, Álvaro Herrera
Reviewers: Shawn Wang, Thibaut Madeleine, Yoshikazu Imai, Kyotaro
Horiguchi; they were also uncredited reviewers for commit 489247b0e6.
Discussion: https://postgr.es/m/9bb31dfe-b0d0-53f3-3ea6-e64b811424cf@lab.ntt.co.jp
In serializable mode, heap_hot_search_buffer() incorrectly acquired a
predicate lock on the root tuple, not the returned tuple that satisfied
the visibility checks. As explained in README-SSI, the predicate lock does
not need to be copied or extended to other tuple versions, but for that to
work, the correct, visible, tuple version must be locked in the first
place.
The original SSI commit had this bug in it, but it was fixed back in 2013,
in commit 81fbbfe335. But unfortunately, it was reintroduced a few months
later in commit b89e151054. Wising up from that, add a regression test
to cover this, so that it doesn't get reintroduced again. Also, move the
code that sets 't_self', so that it happens at the same time that the
other HeapTuple fields are set, to make it more clear that all the code in
the loop operate on the "current" tuple in the chain, not the root tuple.
Bug spotted by Andres Freund, analysis and original fix by Thomas Munro,
test case and some additional changes to the fix by Heikki Linnakangas.
Backpatch to all supported versions (9.4).
Discussion: https://www.postgresql.org/message-id/20190731210630.nqhszuktygwftjty%40alap3.anarazel.de
When parsing a timetz string with a dynamic timezone abbreviation or a
timezone not specified, it was possible to generate incorrect timestamps
based on a date which uses some non-initialized variables if the input
string did not specify fully a date to parse. This is already checked
when a full timezone spec is included in the input string, but the two
other cases mentioned above missed the same checks.
This gets fixed by generating an error as this input is invalid, or in
short when a date is not fully specified.
Valgrind was complaining about this problem.
Bug: #15910
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15910-2eba5106b9aa0c61@postgresql.org
Backpatch-through: 9.4
As of now, logical decoding of a multi-insert has been scanning all
xl_multi_insert_tuple entries only if XLH_INSERT_CONTAINS_NEW_TUPLE was
getting set in the record. This is not an issue on HEAD as multi-insert
records are not used for system catalogs, but the logical decoding logic
includes all the code necessary to handle that properly, except that the
code missed to iterate correctly over all xl_multi_insert_tuple entries
when the flag is not set. Hence, when trying to use multi-insert for
system catalogs, an assertion would be triggered.
An upcoming patch is going to make use of multi-insert for system
catalogs, and this fixes the logic to make sure that all entries are
scanned correctly without softening the existing assertions.
Reported-by: Daniel Gustafsson
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CBFFD532-C033-49EB-9A5A-F67EAEE9EB0B@yesql.se
Commit bf6c614a2 rearranged the lookup of the comparison operators
needed in a hashed subplan, and in so doing, broke the cross-type
case: it caused the original LHS-vs-RHS operator to be used to compare
hash table entries too (which of course are all of the RHS type).
This leads to C functions being passed a Datum that is not of the
type they expect, with the usual hazards of crashes and unauthorized
server memory disclosure.
For the set of hashable cross-type operators present in v11 core
Postgres, this bug is nearly harmless on 64-bit machines, which
may explain why it escaped earlier detection. But it is a live
security hazard on 32-bit machines; and of course there may be
extensions that add more hashable cross-type operators, which
would increase the risk.
Reported by Andreas Seltenreich. Back-patch to v11 where the
problem came in.
Security: CVE-2019-10209
Commit aa27977fe2 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane. Reported by Tom Lane.
Security: CVE-2019-10208
Those data types use parsing and/or calculation wrapper routines which
can generate some generic error messages in the event of a failure. The
caller of these routines can also pass a pointer variable settable by
the routine to track if an error has happened, letting the caller decide
what to do in the event of an error and what error message to generate.
Those routines have been slacking the initialization of the tracking
flag, which can be confusing when reading the code, so add some
safeguards against calls of these parsing routines which could lead to a
dubious result.
The LSN parsing gains an assertion to make sure that the tracking flag
is set, while numeric and float paths initialize the flag to a saner
state.
Author: Jeevan Ladhe
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/CAOgcT0NOM9oR0Hag_3VpyW0uF3iCU=BDUFSPfk9JrWXRcWQHqw@mail.gmail.com
This reverts commit 88bdbd3f74.
As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
Discussion: https://postgr.es/m/CAFj8pRDS8tQ3Wviw9%3DAvODyUciPSrGeMhJi_WPE%2BEB8%2B4gLL-Q%40mail.gmail.com
This reverts commit 9dc1225855.
As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
Discussion: https://postgr.es/m/CAFj8pRDS8tQ3Wviw9%3DAvODyUciPSrGeMhJi_WPE%2BEB8%2B4gLL-Q%40mail.gmail.com
When querying a partitioned table containing a default partition, we
were wrongly deciding to include it in the scan too early in the
process, failing to exclude it in some cases. If we reinterpret the
PruneStepResult.scan_default flag slightly, we can do a better job at
detecting that it can be excluded. The change is that we avoid setting
the flag for that pruning step unless the step absolutely requires the
default partition to be scanned (in contrast with the previous
arrangement, which was to set it unless the step was able to prune it).
So get_matching_partitions() must explicitly check the partition that
each returned bound value corresponds to in order to determine whether
the default one needs to be included, rather than relying on the flag
from the final step result.
Author: Yuzuko Hosoya <hosoya.yuzuko@lab.ntt.co.jp>
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Discussion: https://postgr.es/m/00e601d4ca86$932b8bc0$b982a340$@lab.ntt.co.jp
This portion of the code got forgotten in 7cce159 which has introduced a
new routine to build this node, and this finishes the unification of the
places where IndexInfo is initialized.
Author: Michael Paquier
Discussion: https://postgr.es/m/20190801041322.GA3435@paquier.xyz
In 5f32b29c18 I changed the creation of HashState.hashkeys to
actually use HashState as the parent (instead of HashJoinState, which
was incorrect, as they were executed below HashState), to fix the
problem of hashkeys expressions otherwise relying on slot types
appropriate for HashJoinState, rather than HashState as would be
correct. That reliance was only introduced in 12, which is why it
previously worked to use HashJoinState as the parent (although I'd be
unsurprised if there were problematic cases).
Unfortunately that's not a sufficient solution, because before this
commit, the to-be-hashed expressions referenced inner/outer as
appropriate for the HashJoin, not Hash. That didn't have obvious bad
consequences, because the slots containing the tuples were put into
ecxt_innertuple when hashing a tuple for HashState (even though Hash
doesn't have an inner plan).
There are less common cases where this can cause visible problems
however (rather than just confusion when inspecting such executor
trees). E.g. "ERROR: bogus varno: 65000", when explaining queries
containing a HashJoin where the subsidiary Hash node's hash keys
reference a subplan. While normally hashkeys aren't displayed by
EXPLAIN, if one of those expressions references a subplan, that
subplan may be printed as part of the Hash node - which then failed
because an inner plan was referenced, and Hash doesn't have that.
It seems quite possible that there's other broken cases, too.
Fix the problem by properly splitting the expression for the HashJoin
and Hash nodes at plan time, and have them reference the proper
subsidiary node. While other workarounds are possible, fixing this
correctly seems easy enough. It was a pretty ugly hack to have
ExecInitHashJoin put the expression into the already initialized
HashState, in the first place.
I decided to not just split inner/outer hashkeys inside
make_hashjoin(), but also to separate out hashoperators and
hashcollations at plan time. Otherwise we would have ended up having
two very similar loops, one at plan time and the other during executor
startup. The work seems to more appropriately belong to plan time,
anyway.
Reported-By: Nikita Glukhov, Alexander Korotkov
Author: Andres Freund
Reviewed-By: Tom Lane, in an earlier version
Discussion: https://postgr.es/m/CAPpHfdvGVegF_TKKRiBrSmatJL2dR9uwFCuR+teQ_8tEXU8mxg@mail.gmail.com
Backpatch: 12-
This allows simplification of the plan tree in some common usage
patterns: we can get rid of a join to the function RTE.
In principle we could pull up any immutable expression, but restricting
it to Consts avoids the risk that multiple evaluations of the expression
might cost more than we can save. (Possibly this could be improved in
future --- but we've more or less promised people that putting a function
in FROM guarantees single evaluation, so we'd have to tread carefully.)
To do this, we need to rearrange when eval_const_expressions()
happens for expressions in function RTEs. I moved it to
inline_set_returning_functions(), which already has to iterate over
every function RTE, and in consequence renamed that function to
preprocess_function_rtes(). A useful consequence is that
inline_set_returning_function() no longer has to do this for itself,
simplifying that code.
In passing, break out pull_up_simple_subquery's code that knows where
everything that needs pullup_replace_vars() processing is, so that
the new pull_up_constant_function() routine can share it. We'd
gotten away with one-and-a-half copies of that code so far, since
pull_up_simple_values() could assume that a lot of cases didn't apply
to it --- but I don't think pull_up_constant_function() can make any
simplifying assumptions. Might as well make pull_up_simple_values()
use it too.
(Possibly this refactoring should go further: maybe we could share
some of the code to fill in the pullup_replace_vars_context struct?
For now, I left it that the callers fill that completely.)
Note: the one existing test case that this patch changes has to be
changed because inlining its function RTEs would destroy the point
of the test, namely to check join order.
Alexander Kuzmenkov and Aleksandr Parfenov, reviewed by
Antonin Houska and Anastasia Lubennikova, and whacked around
some more by me
Discussion: https://postgr.es/m/402356c32eeb93d4fed01f66d6c7fe2d@postgrespro.ru
Add sort support for inet, including support for abbreviated keys.
Testing has shown that this reduces the time taken to sort medium to
large inet/cidr inputs by ~50-60% in realistic cases.
Author: Brandur Leach
Reviewed-By: Peter Geoghegan, Edmund Horner
Discussion: https://postgr.es/m/CABR_9B-PQ8o2MZNJ88wo6r-NxW2EFG70M96Wmcgf99G6HUQ3sw@mail.gmail.com
Commit a1c1af2a1 added logic in the deadlock checker to handle lock
grouping, but it was very poorly tested, as evidenced by the bug
fixed in 3420851a2. Add a test case that exercises that a bit better
(and catches the bug --- if you revert 3420851a2, this will hang).
Since it's pretty hard to get parallel workers to take exclusive
regular locks that their parents don't already have, this test operates
by creating a deadlock among advisory locks taken in parallel workers.
To make that happen, we must override the parallel-safety labeling of
the advisory-lock functions, which we do by putting them in mislabeled,
non-inlinable wrapper functions.
We also have to remove the redundant PreventAdvisoryLocksInParallelMode
checks in lockfuncs.c. That seems fine though; if some user accidentally
does what this test is intentionally doing, not much harm will ensue.
(If there are any remaining bugs that are reachable that way, they're
probably reachable in other ways too.)
Discussion: https://postgr.es/m/3243.1564437314@sss.pgh.pa.us
These were introduced by pgindent due to fixe to broken
indentation (c.f. 8255c7a5ee). Previously the mis-indentation of
function prototypes was creatively used to reduce indentation in a few
places.
As that formatting only exists in master and REL_12_STABLE, it seems
better to fix it in both, rather than having some odd indentation in
v12 that somebody might copy for future patches or such.
Author: Andres Freund
Discussion: https://postgr.es/m/20190728013754.jwcbe5nfyt3533vx@alap3.anarazel.de
Backpatch: 12-
The rd_amcache allows an index AM to cache arbitrary information in a
relcache entry. This commit moves the cleanup of rd_amcache so that it
can also be used by table AMs. Nothing takes advantage of that yet, but
I'm sure it'll come handy for anyone writing new table AMs.
Backpatch to v12, where table AM interface was introduced.
Reviewed-by: Julien Rouhaud
When performing ANALYZE on inheritance trees, we collect two samples for
each relation - one for the relation alone, and one for the inheritance
subtree (relation and its child relations). And then we build statistics
on each sample, so for each relation we get two sets of statistics.
For regular (per-column) statistics this works fine, because the catalog
includes a flag differentiating statistics built from those two samples.
But we don't have such flag in the extended statistics catalogs, and we
ended up updating the same row twice, triggering this error:
ERROR: tuple already updated by self
The simplest solution is to disable extended statistics on inheritance
trees, which is what this commit is doing. In the future we may need to
do something similar to per-column statistics, but that requires adding a
flag to the catalog - and that's not backpatchable. Moreover, the current
selectivity estimation code only works with individual relations, so
building statistics on inheritance trees would be pointless anyway.
Author: Tomas Vondra
Backpatch-to: 10-
Discussion: https://postgr.es/m/20190618231233.GA27470@telsasoft.com
Reported-by: Justin Pryzby
A "break" statement erroneously left behind by commit a1c1af2a1
caused TopoSort to do the wrong thing if a lock's wait list
contained multiple members of the same locking group.
Because parallel workers don't normally need any locks not already
taken by their leader, this is very hard --- maybe impossible ---
to hit in production. Still, if it did happen, the queries involved
in an otherwise-resolvable deadlock would block until canceled.
In addition to removing the bogus "break", add an Assert showing
that the conflicting uses of the beforeConstraints[] array (for both
counts and flags) don't overlap, and add some commentary explaining
why not; because it's not obvious without explanation, IMHO.
Original report and patch from Rui Hai Jiang; additional assert
and commentary by me. Back-patch to 9.6 where the bug came in.
Discussion: https://postgr.es/m/CAEri+mLd3bpHLyW+a9pSe1y=aEkeuJpwBSwvo-+m4n7-ceRmXw@mail.gmail.com
When copying the definition of an index rebuilt concurrently for the new
entry, the index information was taken directly from the old index using
the relation cache. In this case, predicates and expressions have
some post-processing to prepare things for the planner, which loses some
information including the collations added in any of them.
This inconsistency can cause issues when attempting for example a table
rewrite, and makes the new indexes rebuilt concurrently inconsistent
with the old entries.
In order to fix the problem, fetch expressions and predicates directly
from the catalog of the old entry, and fill in IndexInfo for the new
index with that. This makes the process more consistent with
DefineIndex(), and the code is refactored with the addition of a routine
to create an IndexInfo node.
Reported-by: Manuel Rigger
Author: Michael Paquier
Discussion: https://postgr.es/m/CA+u7OA5Hp0ra235F3czPom_FyAd-3+XwSJmX95r1+sRPOJc9VQ@mail.gmail.com
Backpatch-through: 12
Early previews of LLVM 9 reveal that our Min() macro causes compiler
errors in LLVM headers reached by the #include directives in
llvmjit_inline.cpp. Let's just undefine it. Per buildfarm animal
seawasp. Back-patch to 11.
Reviewed-by: Fabien Coelho, Tom Lane
Discussion: https://postgr.es/m/20190606173216.GA6306%40alvherre.pgsql
pg_timezone_names() tries to avoid showing the "Factory" zone in
the view, mainly because that has traditionally had a very long
"abbreviation" such as "Local time zone must be set--see zic manual page",
so that showing it messes up psql's formatting of the whole view.
Since tzdb version 2016g, IANA instead uses the abbreviation "-00",
which is sane enough that there's no reason to discriminate against it.
On the other hand, it emerges that FreeBSD and possibly other packagers
are so wedded to backwards compatibility that they hack the IANA data
to keep the old spelling --- and not just that old spelling, but even
older spellings that IANA used back in the stone age. This caused the
filter logic to fail to suppress "Factory" at all on such platforms,
though the formatting problem is definitely real in that case.
To solve both problems, get rid of the hard-wired assumption about
exactly what Factory's abbreviation is, and instead reject abbreviations
exceeding 31 characters. This will allow Factory to appear in the view
if and only if it's using the modern abbreviation.
In passing, simplify the code we add to zic.c to support "zic -P"
to remove its now-obsolete hacks to not print the Factory zone's
abbreviation. Unlike pg_timezone_names(), there's no reason for
that code to support old/nonstandard timezone data.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Discussion: https://postgr.es/m/3961.1564086915@sss.pgh.pa.us
Money values exceeding about 18 digits (depending on lc_monetary)
could be inaccurately converted to numeric, due to select_div_scale()
deciding it didn't need to compute any fractional digits. Force
its hand by setting the dscale of one division input to equal the
number of fractional digits we need.
In passing, rearrange the logic to not do useless work in locales
where money values are considered integral.
Per bug #15925 from Slawomir Chodnicki. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/15925-da9953e2674bb5c8@postgresql.org
Since 15d8f8312 we assert that - and since 7ef04e4d2c, 4da597edf1
rely on - the slot type for an expression's
ecxt_{outer,inner,scan}tuple not changing, unless explicitly flagged
as such. That allows to either skip deforming (for a virtual tuple
slot) or optimize the code for JIT accelerated deforming
appropriately (for other known slot types).
This assumption was sometimes violated for grouping sets, when
nodeAgg.c internally uses tuplesorts, and the child node doesn't
return a TTSOpsMinimalTuple type slot. Detect that case, and flag that
the outer slot might not be "fixed".
It's probably worthwhile to optimize this further in the future, and
more granularly determine whether the slot is fixed. As we already
instantiate per-phase transition and equal expressions, we could
cheaply set the slot type appropriately for each phase. But that's a
separate change from this bugfix.
This commit does include a very minor optimization by avoiding to
create a slot for handling tuplesorts, if no such sorts are
performed. Previously we created that slot unnecessarily in the common
case of computing all grouping sets via hashing. The code looked too
confusing without that, as the conditions for needing a sort slot and
flagging that the slot type isn't fixed, are the same.
Reported-By: Ashutosh Sharma
Author: Andres Freund
Discussion: https://postgr.es/m/CAE9k0PmNaMD2oHTEAhRyxnxpaDaYkuBYkLa1dpOpn=RS0iS2AQ@mail.gmail.com
Backpatch: 12-, where the bug was introduced in 15d8f8312
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
After 277cb78983 ON CONFLICT ... SET ... RETURNING failed with
ERROR: virtual tuple table slot does not have system attributes
when taking the update path, as the slot used to insert into the
table (and then process RETURNING) was defined to be a virtual slot in
that commit. Virtual slots don't support system columns except for
tableoid and ctid, as the other system columns are AM dependent.
Fix that by using a slot of the table's type. Add tests for system
column accesses in ON CONFLICT ... RETURNING.
Reported-By: Roby, bisected to the relevant commit by Jeff Janes
Author: Andres Freund
Discussion: https://postgr.es/m/73436355-6432-49B1-92ED-1FE4F7E7E100@finefun.com.au
Backpatch: 12-, where the bug was introduced in 277cb78983
Otherwise, after a deleted page gets even older, it becomes unrecyclable
again. B-tree has the same problem, and has had since time immemorial,
but let's at least fix this in GiST, where this is new.
Backpatch to v12, where GiST page deletion was introduced.
Reviewed-by: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/835A15A5-F1B4-4446-A711-BF48357EB602%40yandex-team.ru
The explicit check in gistScanPage() isn't currently really necessary, as
a deleted page is always empty, so the loop would fall through without
doing anything, anyway. But it's a marginal optimization, and it gives a
nice place to attach a comment to explain how it works.
Backpatch to v12, where GiST page deletion was introduced.
Reviewed-by: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/835A15A5-F1B4-4446-A711-BF48357EB602%40yandex-team.ru
If the user creates a deferred constraint in a partition, and in a
transaction they cause the constraint's trigger execution to be deferred
until commit time *and* drop the constraint, then when commit time comes
the queued trigger will fail to run because the trigger object will have
been dropped.
This is explained because when a constraint gets dropped in a
partitioned table, the recursion to drop the ones in partitions is done
by the dependency mechanism, not by ALTER TABLE traversing the recursion
tree as in all other cases. In the non-partitioned case, this problem
is avoided by checking that the table is not "in use" by alter-table;
other alter-table subcommands that recurse to partitions do that check
for each partition. But the dependency mechanism doesn't have a way to
do that. Fix the problem by applying the same check to all partitions
during ALTER TABLE's "prep" phase, which correctly raises the necessary
error.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Discussion: https://postgr.es/m/CAKcux6nZiO9-eEpr1ZD84bT1mBoVmeZkfont8iSpcmYrjhGWgA@mail.gmail.com
The logic in ATExecDropColumn that rejects dropping partition key
columns is quite an inadequate defense, because it doesn't execute
in cases where a column needs to be dropped due to cascade from
something that only the column, not the whole partitioned table,
depends on. That leaves us with a badly broken partitioned table;
even an attempt to load its relcache entry will fail.
We really need to have explicit pg_depend entries that show that the
column can't be dropped without dropping the whole table. Hence,
add those entries. In v12 and HEAD, bump catversion to ensure that
partitioned tables will have such entries. We can't do that in
released branches of course, so in v10 and v11 this patch affords
protection only to partitioned tables created after the patch is
installed. Given the lack of field complaints (this bug was found
by fuzz-testing not by end users), that's probably good enough.
In passing, fix ATExecDropColumn and ATPrepAlterColumnType
messages to be more specific about which partition key column
they're complaining about.
Per report from Manuel Rigger. Back-patch to v10 where partitioned
tables were added.
Discussion: https://postgr.es/m/CA+u7OA4JKCPFrdrAbOs7XBiCyD61XJxeNav4LefkSmBLQ-Vobg@mail.gmail.com
Discussion: https://postgr.es/m/31920.1562526703@sss.pgh.pa.us
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com
Some code could get confused when certain catalog state involving both
identity and serial sequences was present, perhaps during an attempt
to upgrade the latter to the former. Specifically, dropping the
default of a serial column maintains the ownership of the sequence by
the column, and so it would then be possible to afterwards make the
column an identity column that would now own two sequences. This
causes the code that looks up the identity sequence to error out,
making the new identity column inoperable until the ownership of the
previous sequence is released.
To fix this, make the identity sequence lookup only consider sequences
with the appropriate dependency type for an identity sequence, so it
only ever finds one (unless something else is broken). In the above
example, the old serial sequence would then be ignored. Reorganize
the various owned-sequence-lookup functions a bit to make this
clearer.
Reported-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/470c54fc8590be4de0f41b0d295fd6390d5e8a6c.camel@cybertec.at
In nodeAppend.c and nodeMergeAppend.c there were some foreach loops which
looped over the list of subplans and only performed any work if the
subplan index was found in a Bitmapset. With the old linked list
implementation of List, this form made sense as accessing the Nth list
element was O(N). However, thanks to 1cff1b95a we now have array-based
lists, so accessing the Nth element has become O(1).
Here we make the most of the O(1) lookups and just loop over the set
members of the Bitmapset with bms_next_member(). This performs slightly
better when a small number of the list items are in the Bitmapset. Micro
benchmarks show that when the Bitmapset contains all or most of the list
items then the new code is ever so slightly slower. In practice, the cost
is so small that it's drowned out by various other things such as locking
the relations belonging to each subplan, etc.
The primary goal here is to leave better code examples around which benefit
better from the new list implementation.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAKJS1f8ZcsLVgkF4wOfRyMYTcPgLFiUAOedFC+U2vK_aFZk-BA@mail.gmail.com
3373c7155 changed how we determine EquivalenceClasses for relations and
added an Assert to ensure all relations mentioned in each EC's ec_relids
was a RELOPT_BASEREL. However, the join removal code may remove a LEFT
JOIN and since it does not clean up EC members belonging to the removed
relations it can leave RELOPT_DEADREL rels in ec_relids.
Fix this by adjusting the Assert to allow RELOPT_DEADREL rels too.
Reported-by: sqlsmith via Andreas Seltenreich
Discussion: https://postgr.es/m/87y30r8sls.fsf@ansel.ydns.eu
Coverity complained about this code, apparently because it uses a local
array of size FUNC_MAX_ARGS without a guard that the input argument list
is no longer than that. (Not sure why it complained today, since this
code's been the same for a long time; possibly it re-analyzed everything
the List API change touched?)
Rather than add a guard, though, let's just get rid of the local array
altogether. It was only there to avoid list_nth() calls, and those are
no longer expensive.
Previously in order to determine which ECs a relation had members in, we
had to loop over all ECs stored in PlannerInfo's eq_classes and check if
ec_relids mentioned the relation. For the most part, this was fine, as
generally, unless queries were fairly complex, the overhead of performing
the lookup would have not been that significant. However, when queries
contained large numbers of joins and ECs, the overhead to find the set of
classes matching a given set of relations could become a significant
portion of the overall planning effort.
Here we allow a much more efficient method to access the ECs which match a
given relation or set of relations. A new Bitmapset field in RelOptInfo
now exists to store the indexes into PlannerInfo's eq_classes list which
each relation is mentioned in. This allows very fast lookups to find all
ECs belonging to a single relation. When we need to lookup ECs belonging
to a given pair of relations, we can simply bitwise-AND the Bitmapsets from
each relation and use the result to perform the lookup.
We also take the opportunity to write a new implementation of
generate_join_implied_equalities which makes use of the new indexes.
generate_join_implied_equalities_for_ecs must remain as is as it can be
given a custom list of ECs, which we can't easily determine the indexes of.
This was originally intended to fix the performance penalty of looking up
foreign keys matching a join condition which was introduced by 100340e2d.
However, we're speeding up much more than just that here.
Author: David Rowley, Tom Lane
Reviewed-by: Tom Lane, Tomas Vondra
Discussion: https://postgr.es/m/6970.1545327857@sss.pgh.pa.us
The current extended statistics code was a bit confused which collation
to use. When building the statistics, the collations defined as default
for the data types were used (since commit 5e0928005). The MCV code was
however using the column collations for MCV serialization, and then
DEFAULT_COLLATION_OID when computing estimates. So overall the code was
using all three possible options, inconsistently.
This uses the column colation everywhere - this makes it consistent with
what 5e0928005 did for regular stats. We however do not track the
collations in a catalog, because we can derive them from column-level
information. This may need to change in the future, e.g. after allowing
statistics on expressions.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu
Backpatch-to: 12
The examine_opclause_expression function needs to return information on
which side of the operator we found the Var, but the variable was called
"isgt" which is rather misleading (it assumes the operator is either
less-than or greater-than, but it may be equality or something else).
Other places in the planner use a variable called "varonleft" for this
purpose, so just adopt the same convention here.
The code also assumed we don't care about this flag for equality, as
(Var = Const) and (Const = Var) should be the same thing. But that does
not work for cross-type operators, in which case we need to pass the
parameters to the procedure in the right order. So just use the same
code for all types of expressions.
This means we don't need to care about the selectivity estimation
function anymore, at least not in this code. We should only get the
supported cases here (thanks to statext_is_compatible_clause).
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu
Backpatch-to: 12
The values 'infinity' and '-infinity' are a part of the DATE type
itself, so a bound of the date 'infinity' is not the same as an
unbounded/infinite range. However, it is still wrong to try to
canonicalize such values, because adding or subtracting one has no
effect. Fix by treating 'infinity' and '-infinity' the same as
unbounded ranges for the purposes of canonicalization (but not other
purposes).
Backpatch to all versions because it is inconsistent with the
documented behavior. Note that this could be an incompatibility for
applications relying on the behavior contrary to the documentation.
Author: Laurenz Albe
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/77f24ea19ab802bc9bc60ddbb8977ee2d646aec1.camel%40cybertec.at
Backpatch-through: 9.4
Commit 857f9c36cd, which taught nbtree VACUUM to avoid unnecessary
index scans, bumped the nbtree version number from 2 to 3, while adding
the ability for nbtree indexes to be upgraded on-the-fly. Various
assertions that assumed that an nbtree index was always on version 2 had
to be changed to accept any supported version (version 2 or 3 on
Postgres 11).
However, a few assertions were missed in the initial commit, all of
which were in code paths that cache a local copy of the metapage
metadata, where the index had been expected to be on the current version
(no longer version 2) as a generic sanity check. Rather than simply
update the assertions, follow-up commit 0a64b45152 intentionally made
the metapage caching code update the per-backend cached metadata version
without changing the on-disk version at the same time. This could even
happen when the planner needed to determine the height of a B-Tree for
costing purposes. The assertions only fail on Postgres v12 when
upgrading from v10, because they were adjusted to use the authoritative
shared memory metapage by v12's commit dd299df8.
To fix, remove the cache-only upgrade mechanism entirely, and update the
assertions themselves to accept any supported version (go back to using
the cached version in v12). The fix is almost a full revert of commit
0a64b45152 on the v11 branch.
VACUUM only considers the authoritative metapage, and never bothers with
a locally cached version, whereas everywhere else isn't interested in
the metapage fields that were added by commit 857f9c36cd. It seems
unlikely that this bug has affected any user on v11.
Reported-By: Christoph Berg
Bug: #15896
Discussion: https://postgr.es/m/15896-5b25e260fdb0b081%40postgresql.org
Backpatch: 11-, where VACUUM was taught to avoid unnecessary index scans.
Now that commit fec0778c8 drew a clear line between public and private
fields in SPITupleTable, it seems pretty silly that the count of valid
tuples isn't on the public side of that line. The reason why not was
that there wasn't such a count. For reasons lost in the mists of time,
spi.c preferred to keep a count of remaining free entries in the array.
But that seems pretty pointless: it's unlike the way we handle similar
code everywhere else, and it involves extra subtractions that surely
outweigh having to do a comparison rather than test-for-zero to check
for array-full.
Hence, rearrange so that this code does the expansible array logic
the same as everywhere else, with a count of valid entries alongside
the allocated array length. And document the count as public.
I looked for core-code callers where it would make sense to start
relying on tuptable->numvals rather than the separate SPI_processed
variable. Right now there don't seem to be places where it'd be
a win to do so without more code restructuring than I care to
undertake today. In principle, though, having SPITupleTables be
fully self-contained should be helpful down the line.
Discussion: https://postgr.es/m/16852.1563395722@sss.pgh.pa.us
When evaluating clauses on a multivariate MCV list, we build a bitmap
tracking how the clauses match each item of the MCV list. When updating
the bitmap we need to consider the current value (tracking how the item
matches preceding clauses), match for the current clause and whether the
clauses are connected by AND or OR.
Until now the logic was copied on every place updating the bitmap, which
was not quite readable. So just move it to a separate function and call
it where needed.
Backpatch to 12, where the code was introduced. While not a bugfix, this
should make maintenance and future backpatches easier.
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu
There were two issues in how the extended statistics handled NULL values
in opclauses. Firstly, the code was oblivious to the possibility that
Const may be NULL (constisnull=true) in which case the constvalue is
undefined. We need to treat this as a mismatch, and not call the proc.
Secondly, the MCV item itself may contain NULL values too - the code
already did check that, and updated the match bitmap accordingly, but
failed to ensure we won't call the operator procedure anyway. It did
work for AND-clauses, because in that case false in the bitmap stops
evaluation of further clauses. But for OR-clauses ir was not easy to
get incorrect estimates or even trigger a crash.
This fixes both issues by extending the existing check so that it looks
at constisnull too, and making sure it skips calling the procedure.
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu
We expect opclauses to have exactly one Var and one Const, but the code
was checking the Const by calling is_pseudo_constant_clause() which is
incorrect - we need a proper constant.
Fixed by using plain IsA(x,Const) to check type of the node. We need to
do these checks in two places, so move it into a separate function that
can be called in both places.
Reported by Andreas Seltenreich, based on crash reported by sqlsmith.
Backpatch to v12, where this code was introduced.
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu
Backpatch-to: 12
The TYPECACHE_GT_OPR is not needed (it used to be in older version of
the MCV code), but the compiler failed to detect this as the result was
used in a fmgr_info() call, populating a FmgrInfo entry.
Backpatch to v12, where this code was introduced.
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu
Backpatch-to: 12
Formerly, lcons was about the same speed as lappend, but with the new
List implementation, that's not so; with a long List, data movement
imposes an O(N) cost on lcons and list_delete_first, but not lappend.
Hence, invent list_delete_last with semantics parallel to
list_delete_first (but O(1) cost), and change various places to use
lappend and list_delete_last where this can be done without much
violence to the code logic.
There are quite a few places that construct result lists using lcons not
lappend. Some have semantic rationales for that; I added comments about
it to a couple that didn't have them already. In many such places though,
I think the coding is that way only because back in the dark ages lcons
was faster than lappend. Hence, switch to lappend where this can be done
without causing semantic changes.
In ExecInitExprRec(), this results in aggregates and window functions that
are in the same plan node being executed in a different order than before.
Generally, the executions of such functions ought to be independent of
each other, so this shouldn't result in visibly different query results.
But if you push it, as one regression test case does, you can show that
the order is different. The new order seems saner; it's closer to
the order of the functions in the query text. And we never documented
or promised anything about this, anyway.
Also, in gistfinishsplit(), don't bother building a reverse-order list;
it's easy now to iterate backwards through the original list.
It'd be possible to go further towards removing uses of lcons and
list_delete_first, but it'd require more extensive logic changes,
and I'm not convinced it's worth it. Most of the remaining uses
deal with queues that probably never get long enough to be worth
sweating over. (Actually, I doubt that any of the changes in this
patch will have measurable performance effects either. But better
to have good examples than bad ones in the code base.)
Patch by me, thanks to David Rowley and Daniel Gustafsson for review.
Discussion: https://postgr.es/m/21272.1563318411@sss.pgh.pa.us
Potential future SMGR implementations may not want to create
tablespace directories when creating an SMGR relation. Move that
logic to mdcreate(). Move the initialization of md-specific
data structures from smgropen() to a new callback mdopen().
Author: Thomas Munro
Reviewed-by: Shawn Debnath (as part of an earlier patch set)
Discussion: https://postgr.es/m/CA%2BhUKG%2BOZqOiOuDm5tC5DyQZtJ3FH4%2BFSVMqtdC4P1atpJ%2Bqhg%40mail.gmail.com
This should lappend the OIDs, not lcons them; the existing code produced
a list in reversed order. This is harmless for single-key FKs or FKs
where all the key columns are of the same type, which probably explains
how it went unnoticed. But if those conditions are not met,
ATAddForeignKeyConstraint would make the wrong decision about whether an
existing FK needs to be revalidated. I think it would almost always err
in the safe direction by revalidating a constraint that didn't need it.
You could imagine scenarios where the pfeqop check was fooled by
swapping the types of two FK columns in one ALTER TABLE, but that case
would probably be rejected by other tests, so it might be impossible to
get to the worst-case scenario where an FK should be revalidated and
isn't. (And even then, it's likely to be fine, unless there are weird
inconsistencies in the equality behavior of the replacement types.)
However, this is a performance bug at least.
Noted while poking around to see whether lcons calls could be converted
to lappend.
This bug is old, dating to commit cb3a7c2b9, so back-patch to all
supported branches.
It seems worth getting rid of these functions because they require the
caller to retain a ListCell pointer into a List that it's modifying,
which is a dangerous practice with the new List implementation.
(The only other List-modifying function that takes a ListCell pointer
as input is list_delete_cell, which nowadays is preferentially used
via the constrained API foreach_delete_current.)
There was only one remaining caller of these functions after commit
2f5b8eb5a, and that was some fairly ugly GEQO code that can be much
more clearly expressed using a list-index variable and list_insert_nth.
Hence, rewrite that code, and remove the functions.
Discussion: https://postgr.es/m/26193.1563228600@sss.pgh.pa.us
heap.c and relcache.c contained nearly identical copies of logic
to insert OIDs into an OID list while preserving the list's OID
ordering (and rejecting duplicates, in one case but not the other).
The comments argue that this is faster than qsort for small numbers
of OIDs, which is at best unproven, and seems even less likely to be
true now that lappend_cell_oid has to move data around. In any case
it's ugly and hard-to-follow code, and if we do have a lot of OIDs
to consider, it's O(N^2).
Hence, replace with simply lappend'ing OIDs to a List, then list_sort
the completed List, then remove adjacent duplicates if necessary.
This is demonstrably O(N log N) and it's much simpler for the
callers. It's possible that this would be somewhat inefficient
if there were a very large number of duplicates, but that seems
unlikely in the existing usage.
This adds list_deduplicate_oid and list_oid_cmp infrastructure
to list.c. I didn't bother with equivalent functionality for
integer or pointer Lists, but such could always be added later
if we find a use for it.
Discussion: https://postgr.es/m/26193.1563228600@sss.pgh.pa.us
In the wake of commit 1cff1b95a, the obvious way to sort a List
is to apply qsort() directly to the array of ListCells. list_qsort
was building an intermediate array of pointers-to-ListCells, which
we no longer need, but getting rid of it forces an API change:
the comparator functions need to do one less level of indirection.
Since we're having to touch the callers anyway, let's do two additional
changes: sort the given list in-place rather than making a copy (as
none of the existing callers have any use for the copying behavior),
and rename list_qsort to list_sort. It was argued that the old name
exposes more about the implementation than it should, which I find
pretty questionable, but a better reason to rename it is to be sure
we get the attention of any external callers about the need to fix
their comparator functions.
While we're at it, change four existing callers of qsort() to use
list_sort instead; previously, they all had local reinventions
of list_qsort, ie build-an-array-from-a-List-and-qsort-it.
(There are some other places where changing to list_sort perhaps
would be worthwhile, but they're less obviously wins.)
Discussion: https://postgr.es/m/29361.1563220190@sss.pgh.pa.us
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
The logic just added by commit e3899ffd falls back on a 50:50 page split
in the event of a new item that's just to the right of our provisional
"many duplicates" split point. Fix a comment that incorrectly claimed
that the new item had to be just to the left of our provisional split
point.
Backpatch: 12-, just like commit e3899ffd.
Specific ever-decreasing insertion patterns could cause successive
unbalanced nbtree page splits. Problem cases involve a large group of
duplicates to the left, and ever-decreasing insertions to the right.
To fix, detect the situation by considering the newitem offset before
performing a split using nbtsplitloc.c's "many duplicates" strategy. If
the new item was inserted just to the right of our provisional "many
duplicates" split point, infer ever-decreasing insertions and fall back
on a 50:50 (space delta optimal) split. This seems to barely affect
cases that already had acceptable space utilization.
An alternative fix also seems possible. Instead of changing
nbtsplitloc.c split choice logic, we could instead teach _bt_truncate()
to generate a new value for new high keys by interpolating from the
lastleft and firstright key values. That would certainly be a more
elegant fix, but it isn't suitable for backpatching.
Discussion: https://postgr.es/m/CAH2-WznCNvhZpxa__GqAa1fgQ9uYdVc=_apArkW2nc-K3O7_NA@mail.gmail.com
Backpatch: 12-, where the nbtree page split enhancements were introduced.
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
In order to be able to work with FullTransactionId values during replay
without increasing the size of the WAL, infer the epoch. In general we
can't do that safely, but during replay we can because we know that
nextFullXid can't advance concurrently.
Prevent frontend code from seeing this new function, due to the above
restriction. Perhaps in future it will be possible to extract the value
entirely from independent WAL records, and then this restriction can be
lifted.
Author: Thomas Munro, based on earlier code from Andres Freund
Discussion: https://postgr.es/m/CA%2BhUKG%2BmLmuDjMi6o1dxkKvGRL56Y2Rz%2BiXAcrZV03G9ZuFQ8Q%40mail.gmail.com
This adds a built-in function to generate UUIDs.
PostgreSQL hasn't had a built-in function to generate a UUID yet,
relying on external modules such as uuid-ossp and pgcrypto to provide
one. Now that we have a strong random number generator built-in, we
can easily provide a version 4 (random) UUID generation function.
This patch takes the existing function gen_random_uuid() from pgcrypto
and makes it a built-in function. The pgcrypto implementation now
internally redirects to the built-in one.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/6a65610c-46fc-2323-6b78-e8086340a325@2ndquadrant.com
Index-based calculation of this operator is exact. So, signature of
gist_bbox_distance() function is changes so that caller is responsible for
setting *recheck flag.
Discussion: https://postgr.es/m/f71ba19d-d989-63b6-f04a-abf02ad9345d%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Tom Lane, Alexander Korotkov
Some of <-> operators between geometric types have their commutators missed.
This commit adds them. The motivation is upcoming kNN support for some of those
operators.
Discussion: https://postgr.es/m/f71ba19d-d989-63b6-f04a-abf02ad9345d%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Tom Lane, Alexander Korotkov
After a process decides not to wait for a condition variable, it can
still consume a signal before it reaches ConditionVariableCancelSleep().
In that case, pass the signal on to another waiter if possible, so that
a signal doesn't go missing when there is another process ready to
receive it.
Author: Thomas Munro
Reviewed-by: Shawn Debnath
Discussion: https://postgr.es/m/CA%2BhUKGLQ_RW%2BXs8znDn36e-%2Bmq2--zrPemBqTQ8eKT-VO1OF4Q%40mail.gmail.com
Commit 3ca930fc3 modified get_actual_variable_range() to use a new
"SnapshotNonVacuumable" snapshot type for selecting tuples that it
would consider valid. However, because that snapshot type can accept
recently-dead tuples, this caused a bug when using a recently-created
index: we might accept a recently-dead tuple that is an early member
of a broken HOT chain and does not actually match the index entry.
Then, the data extracted from the heap tuple would not necessarily be
an endpoint value of the column; it could even be NULL, leading to
get_actual_variable_range() itself reporting "found unexpected null
value in index". Even without an error, this could lead to poor
plan choices due to an erroneous notion of the endpoint value.
We can improve matters by changing the code to use the index-only
scan technique (which didn't exist when get_actual_variable_range was
originally written). If any of the tuples in a HOT chain are live
enough to satisfy SnapshotNonVacuumable, we take the data from the
index entry, ignoring what is in the heap. This fixes the problem
without changing the live-vs-dead-tuple behavior from what was
intended by commit 3ca930fc3.
A side benefit is that for static tables we might not have to touch
the heap at all (when the extremal value is in an all-visible page).
In addition, we can save some overhead by not having to create a
complete ExecutorState, and we don't need to run FormIndexDatum,
avoiding more cycles as well as the possibility of failure for
indexes on expressions. (I'm not sure that this code would ever
be used to determine the extreme value of an expression, in the
current state of the planner; but it's definitely possible that
lower-order columns of the selected index could be expressions.
So one could construct perhaps-artificial examples in which the
old code unexpectedly failed due to trying to compute an
expression's value for a now-dead row.)
Per report from Manuel Rigger. Back-patch to v11 where commit
3ca930fc3 came in.
Discussion: https://postgr.es/m/CA+u7OA7W4NWEhCvftdV6_8bbm2vgypi5nuxfnSEJQqVKFSUoMg@mail.gmail.com
match_clause_to_partition_key incorrectly would return
PARTCLAUSE_UNSUPPORTED if a bool qual could not be matched to the current
partition key. This was a problem, as it causes the calling function to
discard the qual and not try to match it to any other partition key. If
there was another partition key which did match this qual, then the qual
would not be checked again and we could fail to prune some partitions.
The worst this could do was to cause partitions not to be pruned when they
could have been, so there was no danger of incorrect query results here.
Fix this by changing match_boolean_partition_clause to have it return a
PartClauseMatchStatus rather than a boolean value. This allows it to
communicate if the qual is unsupported or if it just does not match this
particular partition key, previously these two cases were treated the
same. Now, if match_clause_to_partition_key is unable to match the qual
to any other qual type then we can simply return the value from the
match_boolean_partition_clause call so that the calling function properly
treats the qual as either unmatched or unsupported.
Reported-by: Rares Salcudean
Reviewed-by: Amit Langote
Backpatch-through: 11 where partition pruning was introduced
Discussion: https://postgr.es/m/CAHp_FN2xwEznH6oyS0hNTuUUZKp5PvegcVv=Co6nBXJ+mC7Y5w@mail.gmail.com
Previously, exec_simple_query always ran parse analysis, rewrite, and
planning in MessageContext, allowing all the data generated thereby
to persist until the end of processing of the whole query string.
That's fine for single-command strings, but if a client sends many
commands in a single simple-Query message, this strategy could result
in annoying memory bloat, as complained of by Andreas Seltenreich.
To fix, create a child context to do this work in, and reclaim it
after each command. But we only do so for parsetrees that are not
last in their query string. That avoids adding any memory management
overhead for the typical case of a single-command string. Memory
allocated for the last parsetree would be freed immediately after
finishing the command string anyway.
Similarly, adjust extension.c's execute_sql_string() to reclaim memory
after each command. In that usage, multi-command strings are the norm,
so it's a bit surprising that no one has yet complained of bloat ---
especially since the bloat extended to whatever data ProcessUtility
execution might leak.
Amit Langote, reviewed by Julien Rouhaud
Discussion: https://postgr.es/m/87ftp6l2qr.fsf@credativ.de
This can cause valgrind to complain, as the flag marking a buffer as a
temporary copy was not getting initialized.
While on it, fill in with zeros newly-created buffer pages. This does
not matter when loading a block from a temporary file, but it makes the
push of an index tuple into a new buffer page safer.
This has been introduced by 1d27dcf, so backpatch all the way down to
9.4.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15899-0d24fb273b3dd90c@postgresql.org
Backpatch-through: 9.4
86b85044e abstracted calls to heap functions in COPY FROM to support a
generic table AM. However, when performing a copy into a partitioned
table, this commit neglected to call table_finish_bulk_insert for each
partition. Before 86b85044e, when we always called the heap functions,
there was no need to call heapam_finish_bulk_insert for partitions since
it only did any work when performing a copy without WAL. For partitioned
tables, this was unsupported anyway, so there was no issue. With
pluggable storage, we can't make any assumptions about what the table AM
might want to do in its equivalent function, so we'd better ensure we
always call table_finish_bulk_insert each partition that's received a row.
For now, we make the table_finish_bulk_insert call whenever we evict a
CopyMultiInsertBuffer out of the CopyMultiInsertInfo. This does mean
that it's possible that we call table_finish_bulk_insert multiple times
per partition, which is not a problem other than being an inefficiency.
Improving this requires a more invasive patch, so let's leave that for
another day.
This also changes things so that we no longer needlessly call
table_finish_bulk_insert when performing a COPY FROM for a non-partitioned
table when not using multi-inserts.
Reported-by: Robert Haas
Backpatch-through: 12
Discussion: https://postgr.es/m/CA+TgmoYK=6BpxiJ0tN-p9wtH0BTAfbdxzHhwou0mdud4+BkYuQ@mail.gmail.com
Most block-based table AMs will need the exact same implementation of
the relation_size callback as the heap, and if they use a standard
page layout, they will likely need an implementation of the
relation_estimate_size callback that is very similar to that of the
heap. Rearrange to facilitate code reuse.
Patch by me, reviewed by Michael Paquier, Daniel Gustafsson, and
Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZ6DBPnP1E-vRpQZUJQijJFD54F+SR_pxGiAAS-MyrigA@mail.gmail.com
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
The code for conversions SQL_ASCII <-> MULE_INTERNAL and
SQL_ASCII <-> UTF8 was unreachable, because we long ago changed
the wrapper functions pg_do_encoding_conversion() et al so that
they have hard-wired behaviors for conversions involving SQL_ASCII.
(At least some of those fast paths date back to 2002, though it
looks like we may not have been totally consistent about this until
later.) Given the lack of complaints, nobody is dissatisfied with
this state of affairs. Hence, let's just remove the unreachable code.
Also, change CREATE CONVERSION so that it rejects attempts to
define such conversions. Since we consider that SQL_ASCII represents
lack of knowledge about the encoding in use, such a conversion would
be semantically dubious even if it were reachable.
Adjust a couple of regression test cases that had randomly decided
to rely on these conversion functions rather than any other ones.
Discussion: https://postgr.es/m/41163.1559156593@sss.pgh.pa.us
The itemlen variable used to be referenced in multiple places, but since
reworking the serialization code it's used only in one assert. Fixed by
removing the variable and calling the macro from the assert directly.
Backpatch to 12, where this code was introduced.
Reported-by: Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1zc_ovH9NZd_9ovuiEWkF9yX06URUDdXCmgDydf-bqB5A@mail.gmail.com
The serialization format of multivariate MCV lists included alignment in
order to allow direct access to part of the serialized data, but despite
multiple fixes (see for example commits d85e0f366a and ea4e1c0e8f) this
proved to be problematic.
This commit abandons alignment in the serialized format, and just copies
everything during deserialization. We now also track amount of memory
needed after deserialization (including alignment), which allows us to
deserialize the MCV list in a single pass.
Bump catversion, as this affects contents of pg_statistic_ext_data.
Backpatch to 12, where multi-column MCV lists were introduced.
Author: Tomas Vondra
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/2201.1561521148@sss.pgh.pa.us
The function pg_mcv_list_items() returns values stored in MCV items. The
items may contain columns with different data types, so the function was
generating text array-like representation, but in an ad-hoc way without
properly escaping various characters etc.
Fixed by simply building a text[] array, which also makes it easier to
use from queries etc.
Requires changes to pg_proc entry, so bump catversion.
Backpatch to 12, where multi-column MCV lists were introduced.
Author: Tomas Vondra
Reviewed-by: Dean Rasheed
Discussion: https://postgr.es/m/20190618205920.qtlzcu73whfpfqne@development
When building multi-column MCV lists, we compute base frequency for each
item, i.e. a product of per-column frequencies for values from the item.
As a value may be in multiple groups, the code was scanning the whole
array of groups while adding items to the MCV list. This works fine as
long as the number of distinct groups is small, but it's easy to trigger
trigger O(N^2) behavior, especially after increasing statistics target.
This commit precomputes frequencies for values in all columns, so that
when computing the base frequency it's enough to make a simple bsearch
lookup in the array.
Backpatch to 12, where multi-column MCV lists were introduced.
Discussion: https://postgr.es/m/20190618205920.qtlzcu73whfpfqne@development
Because there is no portable int64/uint64 format specifier and we
can't stick macros like INT64_FORMAT into the middle of a translatable
string, we have been using various workarounds that put the number to
be printed into a string buffer first. Now that we always use our own
sprintf(), we can rely on %lld and %llu to work, so we can use those.
This patch undoes this workaround in a few places where it was
egregiously verbose.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAH2-Wz%3DWbNxc5ob5NJ9yqo2RMJ0q4HXDS30GVCobeCvC9A1L9A%40mail.gmail.com
The main change is a new stemmer for Greek. There are minor changes
in the Danish and French stemmers.
Author: Panagiotis Mavrogiorgos <pmav99@gmail.com>
This is a follow-up refactoring after 09ec55b and b674211, which has
proved that the encoding and decoding routines used by SCRAM have a
poor interface when it comes to check after buffer overflows. This adds
an extra argument in the shape of the length of the result buffer for
each routine, which is used for overflow checks when encoding or
decoding an input string. The original idea comes from Tom Lane.
As a result of that, the encoding routine can now fail, so all its
callers are adjusted to generate proper error messages in case of
problems.
On failure, the result buffer gets zeroed.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20190623132535.GB1628@paquier.xyz
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
d4c3a156c added code to remove columns that were not part of a table's
PRIMARY KEY constraint from the GROUP BY clause when all the primary key
columns were present in the group by. This is fine to do since we know
that there will only be one row per group coming from this relation.
However, the logic failed to consider inheritance parent relations. These
can have child relations without a primary key, but even if they did, they
could duplicate one of the parent's rows or one from another child
relation. In this case, those additional GROUP BY columns are required.
Fix this by disabling the optimization for inheritance parent tables.
In v11 and beyond, partitioned tables are fine since partitions cannot
overlap and before v11 partitioned tables could not have a primary key.
Reported-by: Manuel Rigger
Discussion: http://postgr.es/m/CA+u7OA7VLKf_vEr6kLF3MnWSA9LToJYncgpNX2tQ-oWzYCBQAw@mail.gmail.com
Backpatch-through: 9.6
4de60244e added the call to table_finish_bulk_insert to the
CopyMultiInsertBufferCleanup function. We use a CopyMultiInsertBuffer even
for non-partitioned tables, so having the cleanup do that meant we would
call table_finsh_bulk_insert twice when performing COPY FROM with
a non-partitioned table.
Here we can just remove the direct call in CopyFrom and let
CopyMultiInsertBufferCleanup handle the call instead.
86b85044e abstracted calls to heap functions in COPY FROM to support a
generic table AM. However, when performing a copy into a partitioned
table, this commit neglected to call table_finish_bulk_insert for each
partition. Before 86b85044e, when we always called the heap functions,
there was no need to call heapam_finish_bulk_insert for partitions since
it only did any work when performing a copy without WAL. For partitioned
tables, this was unsupported anyway, so there was no issue. With pluggable
storage, we can't make any assumptions about what the table AM might want
to do in its equivalent function, so we'd better ensure we always call
table_finish_bulk_insert each partition that's received a row.
For now, we make the table_finish_bulk_insert call whenever we evict a
CopyMultiInsertBuffer out of the CopyMultiInsertInfo. This does mean
that it's possible that we call table_finish_bulk_insert multiple times
per partition, which is not a problem other than being an inefficiency.
Improving this requires a more invasive patch, so let's leave that for
another day.
In passing, move the table_finish_bulk_insert for the target of the COPY
command so that it's only called when we're actually performing bulk
inserts. We don't need to call this when inserting 1 row at a time.
Reported-by: Robert Haas
Discussion: https://postgr.es/m/CA+TgmoYK=6BpxiJ0tN-p9wtH0BTAfbdxzHhwou0mdud4+BkYuQ@mail.gmail.com
UBSan complains about this. Instead, cast to a suitable type requiring
only 4-byte alignment. DatumGetAnyArrayP() already assumes one can cast
between AnyArrayType and ArrayType, so this doesn't introduce a new
assumption. Back-patch to 9.5, where AnyArrayType was introduced.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20190629210334.GA1244217@rfd.leadboat.com
The logic in reorder_grouping_sets to order grouping set elements to
match a pre-specified sort ordering was defective, resulting in
unnecessary sort nodes (though the query output would still be
correct). Repair, simplifying the code a little, and add a test.
Per report from Richard Guo, though I didn't use their patch. Original
bug seems to have been my fault.
Backpatch back to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/CAN_9JTzyjGcUjiBHxLsgqfk7PkdLGXiM=pwM+=ph2LsWw0WO1A@mail.gmail.com
Instead of calling pg_lsn_in() in check_recovery_target_lsn and
timestamptz_in() in check_recovery_target_time, reorganize the
respective code so that we don't raise any errors in the check hooks.
The previous code tried to use PG_TRY/PG_CATCH to handle errors in a
way that is not safe, so now the code contains no ereport() calls and
can operate safely within the GUC error handling system.
Moreover, since the interpretation of the recovery_target_time string
may depend on the time zone, we cannot do the final processing of that
string until all the GUC processing is done. Instead,
check_recovery_target_time() now does some parsing for syntax
checking, but the actual conversion to a timestamptz value is done
later in the recovery code that uses it.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190611061115.njjwkagvxp4qujhp%40alap3.anarazel.de
The date/time values 'current', 'invalid', and 'undefined' were
removed a long time ago, but the code still contains explicit error
handling for the transition. To simplify the code and avoid having to
handle these values everywhere, just remove the recognition of these
tokens altogether now.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
In commit 18555b132 we tentatively established a rule that regression
tests should use names containing "regression" for databases, and names
starting with "regress_" for all other globally-visible object names, so
as to circumscribe the side-effects that "make installcheck" could have
on an existing installation.
This commit adds a simple enforcement mechanism for that rule: if the code
is compiled with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS defined, it
will emit a warning (not an error) whenever a database, role, tablespace,
subscription, or replication origin name is created that doesn't obey the
rule. Running one or more buildfarm members with that symbol defined
should be enough to catch new violations, at least in the regular
regression tests. Most TAP tests wouldn't notice such warnings, but
that's actually fine because TAP tests don't execute against an existing
server anyway.
Since it's already the case that running src/test/modules/ tests in
installcheck mode is deprecated, we can use that as a home for tests
that seem unsafe to run against an existing server, such as tests that
might have side-effects on existing roles. Document that (though this
commit doesn't in itself make it any less safe than before).
Update regress.sgml to define these restrictions more clearly, and
to clean up assorted lack-of-up-to-date-ness in its descriptions of
the available regression tests.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
Since we generate such names internally, it seems like a good idea
to have a policy of disallowing them for user use, as we do for many
other object types. Otherwise attempts to use them will randomly
fail due to collisions with internally-generated names.
Discussion: https://postgr.es/m/3606.1561747369@sss.pgh.pa.us
We forgot to map column numbers to/from the default partition for
various operations, leading to valid cases failing with spurious
errors, such as
ERROR: attribute N of type some_partition has been dropped
It was also possible that the search for conflicting rows in the default
partition when attaching another partition would fail to detect some.
Secondarily, it was also possible that such a search should be skipped
(because the constraint was implied) but wasn't.
Fix all this by mapping column numbers when necessary.
Reported by: Daniel Wilches
Author: Amit Langote
Discussion: https://postgr.es/m/15873-8c61945d6b3ef87c@postgresql.org
When a partitioned tables contains foreign tables as partitions, it is
not possible to implement unique or primary key indexes -- but when
regular indexes are created, there is no reason to do anything other
than ignoring such partitions. We were raising errors upon encountering
the foreign partitions, which is unfriendly and doesn't protect against
any actual problems.
Relax this restriction so that index creation is allowed on partitioned
tables containing foreign partitions, becoming a no-op on them. (We may
later want to redefine this so that the FDW is told to create the
indexes on the foreign side.) This applies to CREATE INDEX, as well as
ALTER TABLE / ATTACH PARTITION and CREATE TABLE / PARTITION OF.
Backpatch to 11, where indexes on partitioned tables were introduced.
Discussion: https://postgr.es/m/15724-d5a58fa9472eef4f@postgresql.org
Author: Álvaro Herrera
Reviewed-by: Amit Langote
a96c41f has introduced the option for heap, but it still lacked the
variant to control the behavior for toast relations.
While on it, refactor the tests so as they stress more scenarios with
the various values that vacuum_index_cleanup can use. It would be
useful to couple those tests with pageinspect to check that pages are
actually cleaned up, but this is left for later.
Author: Masahiko Sawada, Michael Paquier
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAD21AoCqs8iN04RX=i1KtLSaX5RrTEM04b7NHYps4+rqtpWNEg@mail.gmail.com
Move ATExecAlterColumnGenericOptions away from where it was unthinkingly
dropped, in the middle of a lot of ALTER COLUMN TYPE code. I don't have
any high principles about where to put it instead, so let's just put it
after ALTER COLUMN TYPE and before ALTER OWNER, matching existing
decisions about how to order related code stanzas.
Also add the minimal function header comment that the original author
was too cool to bother with.
Along the way, upgrade header comments for nearby ALTER COLUMN TYPE
functions.
Discussion: https://postgr.es/m/14787.1561403130@sss.pgh.pa.us
This patch reverts all the code changes of commit e76de8861, which turns
out to have been seriously misguided. We can't wait till later to compute
the definition string for an index; we must capture that before applying
the data type change for any column it depends on, else ruleutils.c will
deliverr wrong/misleading results. (This fine point was documented
nowhere, of course.)
I'd also managed to forget that ATExecAlterColumnType executes once per
ALTER COLUMN TYPE clause, not once per statement; which resulted in the
code being basically completely broken for any case in which multiple ALTER
COLUMN TYPE clauses are applied to a table having non-constraint indexes
that must be rebuilt. Through very bad luck, none of the existing test
cases nor the ones added by e76de8861 caught that, but of course it was
soon found in the field.
The previous patch also had an implicit assumption that if a constraint's
index had a dependency on a table column, so would the constraint --- but
that isn't actually true, so it didn't fix such cases.
Instead of trying to delete unneeded index dependencies later, do the
is-there-a-constraint lookup immediately on seeing an index dependency,
and switch to remembering the constraint if so. In the unusual case of
multiple column dependencies for a constraint index, this will result in
duplicate constraint lookups, but that's not that horrible compared to all
the other work that happens here. Besides, such cases did not work at all
before, so it's hard to argue that they're performance-critical for anyone.
Per bug #15865 from Keith Fiske. As before, back-patch to all supported
branches.
Discussion: https://postgr.es/m/15865-17940eacc8f8b081@postgresql.org
As part of REINDEX CONCURRENTLY, this formerly internal-only error
message becomes potentially user-visible (see regression tests), so
change from errmsg_internal() to errmsg(), and update comment.
The multivariate MCV estimation code may run user-defined operators on
the values in the MCV list, which means that those operators may
potentially leak the values from the MCV list. Guard against leaking
data to unprivileged users by checking that the user has SELECT
privileges on the table or all of the columns referred to by the
statistics.
Additionally, if there are any securityQuals on the RTE (either due to
RLS policies on the table, or accessing the table via a security
barrier view), not all rows may be visible to the current user, even
if they have table or column privileges. Thus we further insist that
the operator be leakproof in this case.
Dean Rasheed, reviewed by Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCUhT9rt7Ui=Vdx4N==VV5XOK5dsXfnGgVOz_JhAicB=ZA@mail.gmail.com
This makes the whole user experience more consistent when bumping into
failures, and more in line with the rewording done via 508300e.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20190514153252.GA22168@alvherre.pgsql
This record uses one metadata buffer and registers some data associated
to the buffer, but when parsing the record for its description a direct
access to the record data was done, but there is none. This leads
usually to an incorrect description, but can also cause crashes like in
pg_waldump. Instead, fix things so as the parsing uses the data
associated to the metadata block.
This is an oversight from 3d92796, so backpatch down to 11.
Author: Michael Paquier
Description: https://postgr.es/m/20190617013059.GA3153@paquier.xyz
Backpatch-through: 11
This fixes an embarrassing oversight I (Andres) made in 737a292b,
namely missing two place where liverows/deadrows were used when
converting those variables to pointers, leading to incrementing the
pointer, rather than the value.
It's not that actually that easy to trigger a crash: One needs tuples
deleted by the current transaction, followed by a tuple deleted in
another session, all in one page. Which is presumably why this hasn't
been noticed before.
Reported-By: Steve Singer
Author: Steve Singer
Discussion: https://postgr.es/m/c7988239-d42c-ddc4-41db-171b23b35e4f@ssinger.info
This puts back reverted commit de87a084c0, with some bug fixes.
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for T1
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for T1
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once T1 releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after T1 finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
Discussion: https://postgr.es/m/2815.1560521451@sss.pgh.pa.us
WHERE EXISTS (...) queries cannot be executed by Parallel Hash Join
with jointype JOIN_UNIQUE_INNER, because there is no way to make a
partial plan totally unique. The consequence of allowing such plans
was duplicate results from some EXISTS queries.
Back-patch to 11. Bug #15857.
Author: Thomas Munro
Reviewed-by: Tom Lane
Reported-by: Vladimir Kriukov
Discussion: https://postgr.es/m/15857-d1ba2a64bce0795e%40postgresql.org
Any authenticated user can overflow a stack-based buffer by changing the
user's own password to a purpose-crafted value. This often suffices to
execute arbitrary code as the PostgreSQL operating system account.
This fix is contributed by multiple folks, based on an initial analysis
from Tom Lane. This issue has been introduced by 68e61ee, so it was
possible to make use of it at authentication time. It became more
easily to trigger after ccae190 which has made the SCRAM parsing more
strict when changing a password, in the case where the client passes
down a verifier already hashed using SCRAM. Back-patch to v10 where
SCRAM has been introduced.
Reported-by: Alexander Lakhin
Author: Jonathan Katz, Heikki Linnakangas, Michael Paquier
Security: CVE-2019-10164
Backpatch-through: 10
This reverts commits 3da73d6839 and de87a084c0.
This code has some tricky corner cases that I'm not sure are correct and
not properly tested anyway, so I'm reverting the whole thing for next
week's releases (reintroducing the deadlock bug that we set to fix).
I'll try again afterwards.
Discussion: https://postgr.es/m/E1hbXKQ-0003g1-0C@gemulon.postgresql.org
We don't need to restrict column privileges on pg_statistic_ext;
all of that data is OK to read publicly. What we *do* need to do,
which was overlooked by 6cbfb784c, is revoke public read access on
pg_statistic_ext_data; otherwise we still have the same security
hole we started with.
Catversion bump to ensure that installations calling themselves
beta2 will have this fix.
Diagnosis/correction by Dean Rasheed and Tomas Vondra, but I'm
going to go ahead and push this fix ASAP so we get more buildfarm
cycles on it.
Discussion: https://postgr.es/m/8833.1560647898@sss.pgh.pa.us
The GRANT in system_views allowed SELECT privileges on various columns in
the pg_statistic_ext catalog, but tableoid was not included in the list.
That made pg_dump fail because it's accessing this column when building
the list of extended statistics to dump.
Discussion: https://postgr.es/m/8833.1560647898%40sss.pgh.pa.us
Regular per-column statistics are stored in pg_statistics catalog, which
is however rather difficult to read, so we also have pg_stats view with
a human-reablable version of the data.
For extended statistic the catalog was fairly easy to read, so we did
not have such human-readable view so far. Commit 9b6babfa2d however did
split the catalog into two, which makes querying harder. Furthermore,
we want to show the multi-column MCV list in a way similar to per-column
stats (and not as a bytea value).
This commit introduces pg_stats_ext view, joining the two catalogs and
massaging the data to produce human-readable output similar to pg_stats.
It also considers RLS and access privileges - the data is shown only when
the user has access to all columns the extended statistic is defined on.
Bumped CATVERSION due to adding new system view.
Author: Dean Rasheed, with improvements by me
Reviewed-by: Dean Rasheed, John Naylor
Discussion: https://postgr.es/m/CAEZATCUhT9rt7Ui%3DVdx4N%3D%3DVV5XOK5dsXfnGgVOz_JhAicB%3DZA%40mail.gmail.com
Since extended statistic got introduced in PostgreSQL 10, there was a
single catalog pg_statistic_ext storing both the definitions and built
statistic. That's however problematic when a user is supposed to have
access only to the definitions, but not to user data.
Consider for example pg_dump on a database with RLS enabled - if the
pg_statistic_ext catalog respects RLS (which it should, if it contains
user data), pg_dump would not see any records and the result would not
define any extended statistics. That would be a surprising behavior.
Until now this was not a pressing issue, because the existing types of
extended statistic (functional dependencies and ndistinct coefficients)
do not include any user data directly. This changed with introduction
of MCV lists, which do include most common combinations of values.
The easiest way to fix this is to split the pg_statistic_ext catalog
into two - one for definitions, one for the built statistic values.
The new catalog is called pg_statistic_ext_data, and we're maintaining
a 1:1 relationship with the old catalog - either there are matching
records in both catalogs, or neither of them.
Bumped CATVERSION due to changing system catalog definitions.
Author: Dean Rasheed, with improvements by me
Reviewed-by: Dean Rasheed, John Naylor
Discussion: https://postgr.es/m/CAEZATCUhT9rt7Ui%3DVdx4N%3D%3DVV5XOK5dsXfnGgVOz_JhAicB%3DZA%40mail.gmail.com
If an EquivalenceClass member expression includes variables from
multiple appendrels, then instead of producing one substituted
expression per child relation as intended, we'd create additional
child expressions for combinations of children of different appendrels.
This happened because the child expressions generated while considering
the first appendrel were taken as sources during substitution of the
second appendrel, and so on. The extra expressions are useless, and are
harmless unless there are too many of them --- but if you have several
appendrels with a thousand or so members each, it gets bad fast.
To fix, consider only original (non-em_is_child) EC members as candidates
to be expanded. This requires the ability to substitute directly from a
top parent relation's Vars to those of an indirect descendant relation,
but we already have that in adjust_appendrel_attrs_multilevel().
Per bug #15847 from Feike Steenbergen. This is a longstanding misbehavior,
but it's only worth worrying about when there are more appendrel children
than we've historically considered wise to use. So I'm not going to take
the risk of back-patching this.
Discussion: https://postgr.es/m/15847-ea3734094bf8ae61@postgresql.org
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for X
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for X
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once X releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after X finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
Given a query in which multiple JOIN nodes used the same alias
(which'd necessarily be in different sub-SELECTs), ruleutils.c
would assign the JOIN nodes distinct aliases for clarity ...
but then it forgot to print the modified aliases when dumping
the JOIN nodes themselves. This results in a dump/reload hazard
for views, because the emitted query is flat-out incorrect:
Vars will be printed with table names that have no referent.
This has been wrong for a long time, so back-patch to all supported
branches.
Philip Dubé
Discussion: https://postgr.es/m/CY4PR2101MB080246F2955FF58A6ED1FEAC98140@CY4PR2101MB0802.namprd21.prod.outlook.com
ATExecAlterColumnType failed to consider the possibility that an index
that needs to be rebuilt might be a child of a constraint that needs to be
rebuilt. We missed this so far because usually a constraint index doesn't
have a direct dependency on its table, just on the constraint object.
But if there's a WHERE clause, then dependency analysis of the WHERE
clause results in direct dependencies on the column(s) mentioned in WHERE.
This led to trying to drop and rebuild both the constraint and its
underlying index.
In v11/HEAD, we successfully drop both the index and the constraint,
and then try to rebuild both, and of course the second rebuild hits a
duplicate-index-name problem. Before v11, it fails with obscure messages
about a missing relation OID, due to trying to drop the index twice.
This is essentially the same kind of problem noted in commit
20bef2c31: the possible dependency linkages are broader than what
ATExecAlterColumnType was designed for. It was probably OK when
written, but it's certainly been broken since the introduction of
partial exclusion constraints. Fix by adding an explicit check
for whether any of the indexes-to-be-rebuilt belong to any of the
constraints-to-be-rebuilt, and ignoring any that do.
In passing, fix a latent bug introduced by commit 8b08f7d48: in
get_constraint_index() we must "continue" not "break" when rejecting
a relation of a wrong relkind. This is harmless today because we don't
expect that code path to be taken anyway; but if there ever were any
relations to be ignored, the existing coding would have an extremely
undesirable dependency on the order of pg_depend entries.
Also adjust a couple of obsolete comments.
Per bug #15835 from Yaroslav Schekin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/15835-32d9b7a76c06a7a9@postgresql.org
For a non-superuser, changing a comment on a domain constraint was
leading to a cache lookup failure as the code tried to perform the
ownership lookup on the constraint OID itself, thinking that it was a
type, but this check needs to happen on the type the domain constraint
relies on. As the type a domain constraint relies on can be guessed
directly based on the constraint OID, first fetch its type OID and
perform the ownership on it.
This is broken since 7eca575, which has split the handling of comments
for table constraints and domain constraints, so back-patch down to
9.5.
Reported-by: Clemens Ladisch
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/15833-808e11904835d26f@postgresql.org
Backpatch-through: 9.5
json_to_record(), when an output column is declared as type json or jsonb,
should emit the corresponding field of the input JSON object. But it got
this slightly wrong when the field is just a string literal: it failed to
escape the contents of the string. That typically resulted in syntax
errors if the string contained any double quotes or backslashes.
jsonb_to_record() handles such cases correctly, but I added corresponding
test cases for it too, to prevent future backsliding.
Improve the documentation, as it provided only a very hand-wavy
description of the conversion rules used by these functions.
Per bug report from Robert Vollmert. Back-patch to v10 where the
error was introduced (by commit cf35346e8).
Note that PG 9.4 - 9.6 also get this case wrong, but differently so:
they feed the de-escaped contents of the string literal to json[b]_in.
That behavior is less obviously wrong, so possibly it's being depended on
in the field, so I won't risk trying to make the older branches behave
like the newer ones.
Discussion: https://postgr.es/m/D6921B37-BD8E-4664-8D5F-DB3525765DCD@vllmrt.net
Vignesh found this bug in the check function for
default_table_access_method's check hook, but that was just copied
from older GUCs. Investigation by Michael and me then found the bug in
further places.
When not connected to a database (e.g. in a walsender connection), we
cannot perform (most) GUC checks that need database access. Even when
only shared tables are needed, unless they're
nailed (c.f. RelationCacheInitializePhase2()), they cannot be accessed
without pg_class etc. being present.
Fix by extending the existing IsTransactionState() checks to also
check for MyDatabaseOid.
Reported-By: Vignesh C, Michael Paquier, Andres Freund
Author: Vignesh C, Andres Freund
Discussion: https://postgr.es/m/CALDaNm1KXK9gbZfY-p_peRFm_XrBh1OwQO1Kk6Gig0c0fVZ2uw%40mail.gmail.com
Backpatch: 9.4-
One would have needed out-of-tree code to observe the defects. Remove
unreferenced fields instead of completing their support functions.
Since in-tree code can't reach _readIntoClause(), no catversion bump.
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
The file has been introduced in src/backend/libpq/ as of b0b39f72, but
all backend-side headers of libpq are located in src/include/libpq/.
Note that the identification path on top of the file referred to
src/include/libpq/ from the start.
Author: Michael Paquier
Reviewed-by: Stephen Frost
Discussion: https://postgr.es/m/20190607043415.GE1736@paquier.xyz
In commit 87259588d0 I (Álvaro) tried to rationalize the determination
of tablespace to use for partitioned tables, but failed to handle the
default_tablespace case. Repair and add proper tests.
Author: Amit Langote, Rushabh Lathia
Reported-by: Rushabh Lathia
Reviewed-by: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/CAGPqQf0cYjm1=rjxk_6gU0SjUS70=yFUAdCJLwWzh9bhNJnyVg@mail.gmail.com
We used the same slot to store a tuple from the index, and to store a
tuple from the table. That's not OK. It worked with the heap, because
heapam_getnextslot() stores a HeapTuple to the slot, and doesn't care how
large the tts_values/nulls arrays are. But when I played with a toy table
AM implementation that used a virtual tuple, it caused memory overruns.
In the passing, tidy up comments on the ioss_PscanLen fields.
When performing REINDEX TABLE CONCURRENTLY, if all of the table's indexes
could not be reindexed, a NOTICE message claimed that the table had no
indexes. This was confusing, so let's change the NOTICE text to something
less confusing.
In passing, also mention in the comment before ReindexRelationConcurrently
that materialized views are supported too and also explain what the return
value of the function means.
Author: Ashwin Agrawal
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CALfoeithHvi13p_VyR8kt9o6Pa7Z=Smi6Nfc2anHnQx5Lj8bTQ@mail.gmail.com
86b85044e rewrote how COPY FROM works to allow multiple tuple buffers to
exist to once thus allowing multi-inserts to be used in more cases with
partitioned tables. That commit neglected to update the estate's
es_result_relation_info when flushing the insert buffer to the partition
making it possible for the index tuples to be added into an index on the
wrong partition.
Fix this and also add an Assert in ExecInsertIndexTuples to help ensure
that we never make this mistake again.
Reported-by: Haruka Takatsuka
Author: Ashutosh Sharma
Discussion: https://postgr.es/m/15832-b1bf336a4ee246b5@postgresql.org
When merging two attributes, we are sure that at least one remains.
However, when deleting one element in the attribute list we may finish
with an empty list returned as NIL by list_delete_cell(), but the code
failed to track that, which is not project-like. Adjust the call so as
we check for an empty list, and make use of it in an assertion.
This has been introduced by e7b3349, when adding support for CREATE
TABLE OF.
Author: Mark Dilger
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/CAE-h2TpPDqSWgOvfvSziOaMngMPwW+QZcmPpY8hQ_KOJ2+3hXQ@mail.gmail.com
It's not really supported to call systable_getnext() in a different
memory context than systable_beginscan() was called in, and it's
*definitely* not safe to do so and then reset that context between
calls. I'm not very clear on how this code survived
CLOBBER_CACHE_ALWAYS testing ... but Alexander Lakhin found a case
that would crash it pretty reliably.
Per bug #15828. Fix, and backpatch to v11 where this code came in.
Discussion: https://postgr.es/m/15828-f6ddd7df4852f473@postgresql.org
Most errors reported in extended statistics are internal issues, and so
should use elog(). The MCV list code was already following this rule, but
the functional dependencies and ndistinct coefficients were using a mix
of elog() and ereport(). Fix this by changing most places to elog(), with
the exception of input functions.
This is a mostly cosmetic change, it makes the life a little bit easier
for translators, as elog() messages are not translated. So backpatch to
PostgreSQL 10, where extended statistics were introduced.
Author: Tomas Vondra
Backpatch-through: 10 where extended statistics were added
Discussion: https://postgr.es/m/20190503154404.GA7478@alvherre.pgsql