operator strategy numbers, ie, GiST and GIN. This is almost cosmetic
enough to not need a catversion bump, but since the opr_sanity regression
test has to change in sync with the catalog entry, I figured I'd better
do one.
are all in new-in-8.2 logic associated with indexability of ScalarArrayOpExpr
(IN-clauses) or amortization of indexscan costs across repeated indexscans
on the inside of a nestloop. In particular:
Fix some logic errors in the estimation for multiple scans induced by a
ScalarArrayOpExpr indexqual.
Include a small cost component in bitmap index scans to reflect the costs of
manipulating the bitmap itself; this is mainly to prevent a bitmap scan from
appearing to have the same cost as a plain indexscan for fetching a single
tuple.
Also add a per-index-scan-startup CPU cost component; while prior releases
were clearly too pessimistic about the cost of repeated indexscans, the
original 8.2 coding allowed the cost of an indexscan to effectively go to zero
if repeated often enough, which is overly optimistic.
Pay some attention to index correlation when estimating costs for a nestloop
inner indexscan: this is significant when the plan fetches multiple heap
tuples per iteration, since high correlation means those tuples are probably
on the same or adjacent heap pages.
joinclause doesn't use any outer-side vars) requires a "bushy" plan to be
created. The normal heuristic to avoid joins with no joinclause has to be
overridden in that case. Problem is new in 8.2; before that we forced the
outer join order anyway. Per example from Teodor.
representing externally-supplied values, since the APIs that carry such
values only specify type not typmod. However, for PARAM_SUBLINK Params
it is handy to carry the typmod of the sublink's output column. This
is a much cleaner solution for the recently reported 'could not find
pathkey item to sort' and 'failed to find unique expression in subplan
tlist' bugs than my original 8.2-compatible patch. Besides, someday we
might want to support typmods for external parameters ...
in normal operation, and we can avoid rewriting pg_control at every log
segment switch if we don't insist that these values be valid. Reducing
the number of pg_control updates is a good idea for both performance and
reliability. It does make pg_resetxlog's life a bit harder, but that seems
a good tradeoff; and anyway the change to pg_resetxlog amounts to automating
something people formerly needed to do by hand, namely look at the existing
pg_xlog files to make sure the new WAL start point was past them.
In passing, change the wording of xlog.c's "database system was interrupted"
messages: describe the pg_control timestamp as "last known up at" rather than
implying it is the exact time of service interruption. With this change the
timestamp will generally be the time of the last checkpoint, which could be
many minutes before the failure; and we've already seen indications that
people tend to misinterpret the old wording.
initdb forced due to change in pg_control layout. Simon Riggs and Tom Lane
release it in a subtransaction abort, but this neglects possibility that
someone outside SPI already did. Fix is for spi.c to forget about a tuptable
as soon as it's handed it back to the caller.
Per bug #2817 from Michael Andreen.
rearrangeable outer joins and the WHERE clause is non-strict and mentions
only nullable-side relations. New bug in 8.2, caused by new logic to allow
rearranging outer joins. Per bug #2807 from Ross Cohen; thanks to Jeff
Davis for producing a usable test case.
a sublink's test expression have the correct vartypmod, rather than defaulting
to -1. There's at least one place where this is important because we're
expecting these Vars to be exactly equal() to those appearing in the subplan
itself. This is a pretty klugy solution --- it would likely be cleaner to
change Param nodes to include a typmod field --- but we can't do that in the
already-released 8.2 branch.
Per bug report from Hubert Fongarnand.
identify long-running transactions. Since we already need to record
the transaction-start time (e.g. for now()), we don't need any
additional system calls to report this information.
Catversion bumped, initdb required.
capitalize the strings like sentences. Remove unnecessarily
specific descriptions of the units used by GUC variables, since
we now allow any reasonable unit to be specified.
FormatMessage() (This should have been in 8.2.0, patched to 8.2.X and
HEAD):
I think this problem to be complex....
http://archives.postgresql.org/pgsql-hackers/2006-11/msg00042.php
FormatMessage of windows cannot consider the encoding of the database.
However, I should try the solution now. It is necessary to clear the
problem.
Multi character-code exists together in message and log. It doesn't
consider
the data base encoding that the user intended....
The user in multi-byte country can try this.
http://inet.winpg.jp/~saito/pg_bug/MessageCheck.c
That is, it is likely to become it in this manner.(Japanese)
http://inet.winpg.jp/~saito/pg_bug/FormatMessage998.png
Hiroshi Saito
by name on each and every row processed. Profiling suggests this may
buy a percent or two for simple UPDATE scenarios, which isn't huge,
but when it's so easy to get ...
by the change to make limit values int8 instead of int4. (Specifically, you
can do DatumGetInt32 safely on a null value, but not DatumGetInt64.) Per
bug #2803 from Greg Johnson.
should allow delete-pending files to actually go away, and thereby work
around the various complaints we've seen about 'permission denied'
errors in such cases. Should be reasonably harmless in any case...
StartupXLOG and ShutdownXLOG no longer need to be critical sections, because
in all contexts where they are invoked, elog(ERROR) would be translated to
elog(FATAL) anyway. (One change in bgwriter.c is needed to make this true:
set ExitOnAnyError before trying to exit. This is a good fix anyway since
the existing code would have gone into an infinite loop on elog(ERROR) during
shutdown.) That avoids a misleading report of PANIC during semi-orderly
failures. Modify the postmaster to include the startup process in the set of
processes that get SIGTERM when a fast shutdown is requested, and also fix it
to not try to restart the bgwriter if the bgwriter fails while trying to write
the shutdown checkpoint. Net result is that "pg_ctl stop -m fast" does
something reasonable for a system in warm standby mode, and so should Unix
system shutdown (ie, universal SIGTERM). Per gripe from Stephen Harris and
some corner-case testing of my own.
remove page on next level linked from next inner page, ginScanToDelete()
wrongly sets parent page. Bug reveals when many item pointers from index
was deleted ( several hundred thousands).
Bug is discovered by hubert depesz lubaczewski <depesz@gmail.com>
Suppose, we need rc2 before release...
result now depends on the lc_messages setting, as noted by Bruce.
Also, mark to_number() and the numeric-type variants of to_char() as stable,
because their results depend on lc_numeric; this is a longstanding oversight.
Also, mark to_date() and to_char(interval) as stable; although these appear
not to depend on any GUC variables as of CVS HEAD, that seems a property
unlikely to survive future improvements. It seems best to mark all the
formatting functions stable and be done with it.
catversion not bumped, because this does not seem critical enough to force
a post-RC1 initdb, and anyway we cannot do so in the back branches.
(in particular, causing the ReadyForQuery message to be eaten) before
returning from do_copy. The only known consequence of failing to do so is
that get_prompt might show a wrong result for the %x transaction status
escape, as reported by Bernd Helmle; but it's possible there are other issues.
Back-patch as far as 7.4, the oldest version supporting %x.
vacuum/analyze timestamp columns at the end, rather than at a random
spot in the middle as in the original patch. This was deemed more usable
as well as less likely to break existing application code. initdb forced
accordingly. In passing, remove former kluge for initializing
pg_stat_file()'s pg_proc entry --- bootstrap mode was fixed recently
so that this can be done without any hacks, but I overlooked this usage.
HeapTuple that is no longer allocated as a single palloc() block; if
used carelessly, this might result in a subsequent memory leak after
heap_freetuple().
AbortTransaction, which would lead to recursion and eventual PANIC exit
as illustrated in recent report from Jeff Davis. First, in xact.c create
a special dedicated memory context for AbortTransaction to run in. This
solves the problem as long as AbortTransaction doesn't need more than 32K
(or whatever other size we create the context with). But in corner cases
it might. Second, in trigger.c arrange to keep pending after-trigger event
records in separate contexts that can be freed near the beginning of
AbortTransaction, rather than having them persist until CleanupTransaction
as before. Third, in portalmem.c arrange to free executor state data
earlier as well. These two changes should result in backing off the
out-of-memory condition before AbortTransaction needs any significant
amount of memory, at least in typical cases such as memory overrun due
to too many trigger events or too big an executor hash table. And all
the same for subtransaction abort too, of course.
zic's Europe/London, rather than Europe/Dublin as before. This seems
a less surprising choice, particularly with respect to dates before
1948. Original suggestion was to translate to straight GMT, but this
seems wrong given that these zones *are* DST-aware. Per offlist
discussion with Magnus.
in the middle of executing a SPI query. This doesn't entirely fix the
problem of memory leakage in plpgsql exception handling, but it should
get rid of the lion's share of leakage.
because on that platform strftime produces localized zone names in varying
encodings. Even though it's only in a comment, this can cause encoding
errors when reloading the dump script. Per suggestion from Andreas
Seltenreich. Also, suppress %Z on Windows in the %s escape of
log_line_prefix ... not sure why this one is different from the other two,
but it shouldn't be.
python 2.5. This involves fixing several violations of the published
spec for creating PyTypeObjects, and adding another regression test
expected output for yet another variation of error message spelling.
Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
Typo in the changes to plperl - uses wrong dir, and had a missing slash.
Also fixes error checking for xsubpp - it was broken in a way that hid
the problem above when run more than once (which is the normal case when
developing).
Negotiation failure is only likely to happen if one side or the other is
misconfigured, eg. bad client certificate. I'm not 100% convinced that
a retry is really the best thing, hence not back-patching this fix for now.
Per gripe from Sergio Cinos.
promoted to FATAL) end in exit(1) not exit(0). Then change the postmaster to
allow exit(1) without a system-wide panic, but not for the startup subprocess
or the bgwriter. There were a couple of places that were using exit(1) to
deliberately force a system-wide panic; adjust these to be exit(2) instead.
This fixes the problem noted back in July that if the startup process exits
with elog(ERROR), the postmaster would think everything is hunky-dory and
proceed to start up. Alternative solutions such as trying to run the entire
startup process as a critical section seem less clean, primarily because of
the fact that a fair amount of startup code is shared by all postmaster
children in the EXEC_BACKEND case. We'd need an ugly special case somewhere
near the head of main.c to make it work if it's the child process's
responsibility to determine what happens; and what's the point when the
postmaster already treats different children differently?
* New versions of OpenSSL come with proper debug versions, and use
suffixed names on the LIBs for that. Adapts library handling to deal
with that.
* Fixes error where it incorrectly enabled Kerberos based on NLS
configuration instead of Kerberos configuration
* Specifies path of perl in config, instead of using current one.
Required when using a 64-bit perl normally, but want to build pl/perl
against 32-bit one (required)
* Fix so pgevent generates win32ver.rc automatically
Magnus Hagander
any no-longer-needed segments; just truncate them to zero bytes and leave
the files in place for possible future re-use. This avoids problems when
the segments are re-used due to relation growth shortly after truncation.
Before, the bgwriter, and possibly other backends, could still be holding
open file references to the old segment files, and would write dirty blocks
into those files where they'd disappear from the view of other processes.
Back-patch as far as 8.0. I believe the 7.x branches are not vulnerable,
because they had no bgwriter, and "blind" writes by other backends would
always be done via freshly-opened file references.
preference for filling pages out-of-order tends to confuse the sanity checks
in md.c, as per report from Balazs Nagy in bug #2737. The fix is to ensure
that the smgr-level code always has the same idea of the logical EOF as the
hash index code does, by using ReadBuffer(P_NEW) where we are adding a single
page to the end of the index, and using smgrextend() to reserve a large batch
of pages when creating a new splitpoint. The patch is a bit ugly because it
avoids making any changes in md.c, which seems the most prudent approach for a
backpatchable beta-period fix. After 8.3 development opens, I'll take a look
at a cleaner but more invasive patch, in particular getting rid of the now
unnecessary hack to allow reading beyond EOF in mdread().
Backpatch as far as 7.4. The bug likely exists in 7.3 as well, but because
of the magnitude of the 7.3-to-7.4 changes in hash, the later-version patch
doesn't even begin to apply. Given the other known bugs in the 7.3-era hash
code, it does not seem worth trying to develop a separate patch for 7.3.
cases where we already hold the desired lock "indirectly", either via
membership in a MultiXact or because the lock was originally taken by a
different subtransaction of the current transaction. These cases must be
accounted for to avoid needless deadlocks and/or inappropriate replacement of
an exclusive lock with a shared lock. Per report from Clarence Gardner and
subsequent investigation.
of an index on a serial column, rather than the name of the associated
sequence. Fallout from recent changes in dependency setup for serials.
Per bug #2732 from Basil Evseenko.
added to information_schema (per a SQL2003 addition). The original coding
failed if a referenced column participated in more than one pg_constraint
entry. Also, it did not work if an FK relied directly on a unique index
without any constraint syntactic sugar --- this case is outside the SQL spec,
but PG has always supported it, so it's reasonable for our information_schema
to handle it too. Per bug#2750 from Stephen Haberman.
Although this patch changes the initial catalog contents, I didn't force
initdb. Any beta3 testers who need the fix can install it via CREATE OR
REPLACE VIEW, so forcing them to initdb seems an unnecessary imposition.
accurately: we have to distinguish the effects of the join's own ON
clauses from the effects of pushed-down clauses. Failing to do so
was a quick hack long ago, but it's time to be smarter. Per example
from Thomas H.
30 seconds instead of retrying forever. Also modify xlog.c so that if
it fails to rename an old xlog segment up to a future slot, it will
unlink the segment instead. Per discussion of bug #2712, in which it
became apparent that Windows can handle unlinking a file that's being
held open, but not renaming it.
The former coding relied on the actual allocated size of the last block,
which made it behave strangely if the first allocation in a context was
larger than ALLOC_CHUNK_LIMIT: subsequent allocations would be referenced
to that and not to the intended series of block sizes. Noted while
studying a memory wastage gripe from Tatsuo.
more space is needed, instead of incrementing by a fixed amount; the old
method wastes lots of space and time when the ultimate size is large.
Per gripe from Tatsuo.
text_to_array(): they all had O(N^2) behavior on long input strings in
multibyte encodings, because of repeated rescanning of the input text to
identify substrings whose positions/lengths were computed in characters
instead of bytes. Fix by tracking the current source position as a char
pointer as well as a character-count. Also avoid some unnecessary palloc
operations. text_to_array() also leaked memory intracall due to failure
to pfree temporary strings. Per gripe from Tatsuo Ishii.
sub-arrays. Per discussion, if all inputs are empty arrays then result
must be an empty array too, whereas a mix of empty and nonempty arrays
should (and already did) draw an error. In the back branches, the
construct was strict: any NULL input immediately yielded a NULL output;
so I left that behavior alone. HEAD was simply ignoring NULL sub-arrays,
which doesn't seem very sensible. For lack of a better idea it now
treats NULL sub-arrays the same as empty ones.
include it if it links properly. It seems too risky to assume that
standard functions like pow() are not special-cased by the compiler.
Per report from Andreas Lange that build fails on Solaris cc compiler
with -fast. Even though we don't consider that a supported option,
I'm worried that similar issues will arise with other compilers.
manually release the LDAP handle via ldap_unbind(). This isn't a
significant problem in practice because an error eventually results
in exiting the process, but we can cleanup correctly without too
much pain.
In passing, fix an error in snprintf() usage: the "size" parameter
to snprintf() is the size of the destination buffer, including space
for the NUL terminator. Also, depending on the value of NAMEDATALEN,
the old coding could have allowed for a buffer overflow.
stale relcache init files (pg_internal.init), and there is no mechanism for
updating them during WAL replay. Easiest solution is just to delete the init
files at conclusion of startup, and let the first backend started in each
database take care of rebuilding the init file. Simon Riggs and Tom Lane.
Back-patched to 8.1. Arguably this should be fixed in 8.0 too, but it would
require significantly more code since 8.0 has no handy startup-time scan of
pg_database to piggyback on. Manual solution of the problem is possible
in 8.0 (just delete the pg_internal.init files before starting WAL replay),
so that may be a sufficient answer.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
deletion code to avoid the case where an upper-level btree page remains "half
dead" for a significant period of time, and to block insertions into a key
range that is in process of being re-assigned to the right sibling of the
deleted page's parent. This prevents the scenario reported by Ed L. wherein
index keys could become out-of-order in the grandparent index level.
Since this is a moderately invasive fix, I'm applying it only to HEAD.
The bug exists back to 7.4, but the back branches will get a different patch.
(blobs) with comments, per bug #2727 from Konstantin Pelepelin.
Mea culpa for not having tested this case.
Back-patch to 8.1; prior branches don't dump blob comments at all.
node of a SubLink or SubPlan testexpr field. Bug resulted from replacing
the old lefthand/exprs list fields with a simple expression field, and not
remembering that expression_tree_walker is coded to save a few cycles by
recursing directly to self on list fields (on the assumption the walker
isn't interested in List nodes per se). On non-list fields it must of
course call the walker. Possibly that hack isn't worth the risk of more
such bugs, but I'll leave it be for now. Per bug report from James Robinson.
outer joins. Originally it was only looking for overlap of the righthand
side of a left join, but we have to do it on the lefthand side too.
Per example from Jean-Pierre Pelletier.
if available (which it usually should be), during processing of Bind
and Execute protocol messages. This improves usefulness of
log_min_error_statement logging for extended query protocol.
sin_port in the returned IP address struct when servname is NULL. This has
been observed to cause failure to bind the stats collection socket, and
could perhaps cause other issues too. Per reports from Brad Nicholson
and Chris Browne.
that conflict with the OID that we want to use for the new database.
This avoids the risk of trying to remove files that maybe we shouldn't
remove. Per gripe from Jon Lapham and subsequent discussion of 27-Sep.
timezone actually has a daylight-savings rule. This avoids breaking
cases that used to work because they went through the DecodePosixTimezone
code path. Per contrib regression failures (mea culpa for not running
those yesterday...). Also document the already-applied change to allow
GMT offsets up to 14 hours.
input routines. Remove the former "DecodePosixTimezone" function in favor of
letting the zic code handle POSIX-style zone specs (see tzparse()). In
particular this means that "PST+3" now means the same as "-03", whereas it
used to mean "-11" --- the zone abbreviation is effectively just a noise word
in this syntax. Make sure that all named and POSIX-style zone names will be
parsed as a single token. Fix long-standing bogosities in printing and input
of fractional-hour timezone offsets (since the tzparse() code will accept
these, we'd better make 'em work). Also correct an error in the original
coding of the zic-zone-name patch: in "timestamp without time zone" input,
zone names are supposed to be allowed but ignored, but the coding was such
that the zone changed the interpretation anyway.
example SET TIME ZONE 'america/new_york' works now. This seems a good
idea on general user-friendliness grounds, and is part of the solution
to the timestamp-input parsing problems I noted recently.
modules; the first try was not usable in EXEC_BACKEND builds (e.g.,
Windows). Instead, just provide some entry points to increase the
allocation requests during postmaster start, and provide a dedicated
LWLock that can be used to synchronize allocation operations performed
by backends. Per discussion with Marc Munro.
one of the program's core data structures, make use of the existing
ability to selectively exclude TOC items by ID. Slightly more code but
much less likely to create future maintenance problems.
1) pgwin32_waitforsinglesocket(): WaitForMultipleObjectsEx now called with
finite timeout (100ms) in case of FP_WRITE and UDP socket. If timeout occurs
then pgwin32_waitforsinglesocket() tries to write empty packet goes to
WaitForMultipleObjectsEx again.
2) pgwin32_send(): add loop around WSASend and pgwin32_waitforsinglesocket().
The reason is: for overlapped socket, 'ok' result from
pgwin32_waitforsinglesocket() isn't guarantee that socket is still free,
it can become busy again and following WSASend call will fail with
WSAEWOULDBLOCK error.
See http://archives.postgresql.org/pgsql-hackers/2006-10/msg00561.php
rows --- if the surrounding query queued any trigger events between the rows,
the events would be fired at the wrong time, leading to bizarre behavior.
Per report from Merlin Moncure.
This is a simple patch that should solve the problem fully in the back
branches, but in HEAD we also need to consider the possibility of queries
with RETURNING clauses. Will look into a fix for that separately.
I introduced in 7.4.1 :-(. It's correct to allow unknown to be coerced to
ANY or ANYELEMENT, since it's a real-enough data type, but it most certainly
isn't an array datatype. This can cause a backend crash but AFAICT is not
exploitable as a security hole. Per report from Michael Fuhr.
Note: as fixed in HEAD, this changes a constant in the pg_stats view,
resulting in a change in the expected regression outputs. The back-branch
patches have been hacked to avoid that, so that pre-existing installations
won't start failing their regression tests.
to process all inclusion switches then all exclusion switches, so that the
behavior is independent of switch ordering.
Use of -T does not cause non-table objects to be suppressed. And
the patterns are now interpreted the same way psql's \d commands do it,
rather than as pure regex commands; this allows for example -t schema.tab
to do what it should have been doing all along. Re-enable the --blobs
switch to do something useful, ie, add back blobs into a dump they were
otherwise suppressed from.
pg_dump as well as psql. Since psql already uses dumputils.c, while there's
not any code sharing in the other direction, this seems the easiest way.
Also, fix misinterpretation of patterns using regex | by adding parentheses
(same bug found previously in similar_escape()). This should be backpatched.
quote chars inside quote marks, should emit one quote *and stay in inquotes
mode*. No doubt the lack of reports of this have something to do with the
poor documentation of the feature ...
portable long options. But we have had portable long options for a long
time now, so this is obsolete. Now people have added options which *only*
work with -X but not as regular long option, so I'm putting a stop to this:
-X is deprecated; it still works, but it has been removed from the
documentation, and please don't add more of them.
max_stack_depth is not set to an unsafe value.
This commit also provides configure-time checking for <sys/resource.h>,
and cleans up some perhaps-unportable code associated with use of that
include file and getrlimit().
platform limit, rather than just blindly raising max_stack_depth.
Also, tweak the code to work properly if someone sets max_stack_depth
to more than 2Gb, which guc.c will allow on a 64-bit machine.
overlapping possible matches for the separator string, such as
string_to_array('123xx456xxx789', 'xx').
Also, revise the logic of replace(), split_part(), and string_to_array()
to avoid O(N^2) work from redundant searches and conversions to pg_wchar
format when there are N matches to the separator string.
Backpatched the full patch as far as 8.0. 7.4 also has the bug, but the
code has diverged a lot, so I just went for a quick-and-dirty fix of the
bug itself in that branch.
been initialized yet. This can happen because there are code paths that call
SysCacheGetAttr() on a tuple originally fetched from a different syscache
(hopefully on the same catalog) than the one specified in the call. It
doesn't seem useful or robust to try to prevent that from happening, so just
improve the function to cope instead. Per bug#2678 from Jeff Trout. The
specific example shown by Jeff is new in 8.1, but to be on the safe side
I'm backpatching 8.0 as well. We could patch 7.x similarly but I think
that's probably overkill, given the lack of evidence of old bugs of this ilk.
remaining functions, simplify pglz_compress's API to not require a useless
data copy when compression fails. Also add a check in pglz_decompress that
the expected amount of data was decompressed.
static variables. This avoids any risk of potential non-reentrancy,
and in particular offers a much cleaner workaround for the Intel compiler
bug that was affecting ginutil.c.
Buildfarm results from 'gazelle' show that there are indeed libedit
versions for which history.h is a needed header, even though it's
apparently been dropped entirely in other versions. Grumble.
Per Bob Friesenhahn's report, this file is not supplied by some versions
of libedit, and even when it is supplied it seems to be just a link to
readline.h, so we don't need to include it anyway.
Also, ensure that we won't try to use a too-old version of Bison.
The previous coding would bleat but then use it anyway; better to invoke
the 'missing' script if any grammar files need to be rebuilt.
gotten rather thoroughly whacked out by careless recent changes: the
intended ratio between the two was off by a lot, and the minimum number
of shared buffers tried had increased by a lot. Problem exposed by
failures on buildfarm members with smaller SHMMAX values.
repeatedly. Now that we don't have to worry about memory leaks from
glibc's qsort, we can safely put CHECK_FOR_INTERRUPTS into the tuplesort
comparators, as was requested a couple months ago. Also, get rid of
non-reentrancy and an extra level of function call in tuplesort.c by
providing a variant qsort_arg() API that passes an extra void * argument
through to the comparison routine. (We might want to use that in other
places too, I didn't look yet.)
1) Make vcbuild actually build the pgevent dll.
2) Change the pgevent DLL file so it doens't specify ordinal for the
functions. You're not supposed to do that. You're actually supposed to
declare them as PRIVATE as well, but mingw doesn't support that. VC++
will throw a warning and not an error though, so we can live with it.
Magnus Hagander
postgresql.conf.
- shared_buffers = 32000kB => 32MB
- temp_buffers = 8000kB => 8MB
- wal_buffers = 8 => 64kB
The code of initdb was a bit modified to write MB-unit values.
Values greater than 8000kB are rounded out to MB.
GUC_UNIT_XBLOCKS is added for wal_buffers. It is like GUC_UNIT_BLOCKS,
but uses XLOG_BLCKSZ instead of BLCKSZ.
Also, I cleaned up the test of GUC_UNIT_* flags in preparation to
add more unit flags in less bits.
ITAGAKI Takahiro
which turns out to be a dominant part of the runtime in scenarios
involving lots of parse-time warnings (such as Stephen Frost's example
of an INSERT with a lot of backslash-containing strings). There's not
a whole lot we can do about the character-at-a-time scanning, but we
can at least avoid traversing the query twice.
severity. This is to ensure the user can cancel a query that's spitting
out lots of notice/warning messages, even if they're coming from a loop
that doesn't otherwise contain a CHECK_FOR_INTERRUPTS. Per gripe from
Stephen Frost.
present; intervening positions are filled with nulls. This behavior
is required by SQL99 but was not implementable before 8.2 due to lack
of support for nulls in arrays. I have only made it work for the
one-dimensional case, which is all that SQL99 requires. It seems quite
complex to get it right in higher dimensions, and since we never allowed
extension at all in higher dimensions, I think that must count as a
future feature addition not a bug fix.
the SQL spec, viz IS NULL is true if all the row's fields are null, IS NOT
NULL is true if all the row's fields are not null. The former coding got
this right for a limited number of cases with IS NULL (ie, those where it
could disassemble a ROW constructor at parse time), but was entirely wrong
for IS NOT NULL. Per report from Teodor.
I desisted from changing the behavior for arrays, since on closer inspection
it's not clear that there's any support for that in the SQL spec. This
probably needs more consideration.
to performance. (A wholesale effort to get rid of strncpy should be
undertaken sometime, but not during beta.) This commit also fixes dynahash.c
to correctly truncate overlength string keys for hashtables, so that its
callers don't have to anymore.
wrong answer, as has been seen to occur with a buggy Linux kernel. Not
really our bug, but it's a simple test in a seldom-used control path,
so might as well have a defense.
'postmaster', so as not to depend on the existence of the postmaster
symlink. Also, implement postmaster-still-alive and postmaster-kill
operations for Windows, per Magnus.
return true for exactly the characters treated as whitespace by their flex
scanners. Per report from Victor Snezhko and subsequent investigation.
Also fix a passel of unsafe usages of <ctype.h> functions, that is, ye olde
char-vs-unsigned-char issue. I won't miss <ctype.h> when we are finally
able to stop using it.
(possibly (un)translated) letters that are actually expected as input.
Also reject invalid responses instead of silenty taken them as "no".
with help from Bernd Helmle
even when a single relation requires more than max_fsm_pages pages. Also,
make VACUUM emit a warning in this case, since it likely means that VACUUM
FULL or other drastic corrective measure is needed. Per reports from Jeff
Frost and others of unexpected changes in the claimed max_fsm_pages need.
is a large enough histogram, it will use the number of matches in the
histogram to derive a selectivity estimate, rather than the admittedly
pretty bogus heuristics involving examining the pattern contents. I set
'large enough' at 100, but perhaps we should change that later. Also
apply the same technique in contrib/ltree's <@ and @> estimator. Per
discussion with Stefan Kaltenbrunner and Matteo Beccati.
tables in the query compete for cache space, not just the one we are
currently costing an indexscan for. This seems more realistic, and it
definitely will help in examples recently exhibited by Stefan
Kaltenbrunner. To get the total size of all the tables involved, we must
tweak the handling of 'append relations' a bit --- formerly we looked up
information about the child tables on-the-fly during set_append_rel_pathlist,
but it needs to be done before we start doing any cost estimation, so
push it into the add_base_rels_to_query scan.
contrib functionality. Along the way, remove the USER_LOCKS configuration
symbol, since it no longer makes any sense to try to compile that out.
No user documentation yet ... mmoncure has promised to write some.
Thanks to Abhijit Menon-Sen for creating a first draft to work from.
oversight in original implementation of VALUES. Also fix an oversight
in recent addition of options to CREATE TABLE AS: they weren't getting
propagated if the query was a set-operation such as UNION.
the table being analyzed. This prevents two ANALYZEs from running
concurrently on the same table and possibly suffering concurrent-update
failures while trying to store their results into pg_statistic. The
downside is that a database-wide ANALYZE executed within a transaction
block will hold ShareUpdateExclusiveLock on many tables simultaneously,
which could lead to concurrency issues or even deadlock against another
such ANALYZE. However, this seems a corner case of less importance
than getting unexpected errors from a foreground ANALYZE when autovacuum
elects to analyze the same table concurrently. Per discussion.
after an error during VACUUM. We have a PG_TRY block anyway around the only
call sites, so just reset it in the CATCH clause instead of having
AtEOXact_Buffers blindly do it during xact end. I think the old code was
actively wrong for the case of a failure during ANALYZE inside a
subtransaction --- the flag wouldn't get cleared until main transaction end.
Probably not worth back-patching though.
and create a new view pg_timezone_names that provides information about
the zones known in the 'zic' database. Magnus Hagander, with some
additional work by Tom Lane.
a schema is our own temp schema or another backend's temp schema, and use
these in place of some former kluges in information_schema. Per my
proposal of yesterday.
an earlier discussion. Centralize assumptions about what libpq depends
on in one place in Makefile.global. I am unconvinced that this list
is complete, but since ecpg seems to have gotten along with just these
entries, we'll try it this way and see what happens.
we probably should make them work reliably for all arrays. Fix code
to handle NULLs and multidimensional arrays, move it into arrayfuncs.c.
GIN is still restricted to indexing arrays with no null elements, however.
agreed these symbols are less easily confused. I made new pg_operator
entries (with new OIDs) for the old names, so as to provide backward
compatibility while making it pretty easy to remove the old names in
some future release cycle. This commit only touches the core datatypes,
contrib will be fixed separately.
to a relation on the nullable side of an outer join. I had removed
this during the outer join planning rewrite a few months ago ... I think
I intended to put it somewhere else, but forgot ...
than being equivalent to setting log_min_duration_statement to zero, this
option now forces logging of all query durations, but doesn't force logging
of query text. Also, add duration logging coverage for fastpath function
calls.
Peter Eisentraut
Andrew Dunstan
Tom Lane
Neil Conway
Bruce Momjian
Teodor Sigaev
Alvaro Herrera
Michael Meskes
PostgreSQL Daemon
