was in the thread "make BufferGetBlockNumber() a macro". Tom
objected to the original patch, so I prepared a new one which
doesn't change BufferGetBlockNumber() into a macro, it just
cleans up some comments and fixes an assertion. The patch
is attached.
Neil Conway
The indexes on most system catalogs are named with the suffix "_index";
not so with TOAST table indexes, which use "_idx". This trivial patch
changes TOAST table index names to use the "_index" suffix for
consistency.
Neil Conway
In summary, if a software writer implements timer events or other events
which generate a signal with a timing fast enough to occur while libpq
is inside connect(), then connect returns -EINTR. The code following
the connect call does not handle this and generates an error message.
The sum result is that the pg_connect() fails. If the timer or other
event is right on the window of the connect() completion time, the
pg_connect() may appear to work sporadically. If the event is too slow,
pg_connect() will appear to always work and if the event is too fast,
pg_connect() will always fail.
David Ford
selected as the creation target namespace; to make that happen, you
must explicitly set search_path that way. This makes initdb a hair
more complex but seems like a good safety feature.
have been divided according to the type of object manipulated - so ALTER
TABLE code is in tablecmds.c, aggregate commands in aggregatecmds.c and
so on.
A few common support routines remain in define.c (prototypes in
src/include/commands/defrem.h).
No code has been changed except for includes to reflect the new files.
The prototypes for aggregatecmds.c, functioncmds.c, operatorcmds.c,
and typecmds.c remain in src/include/commands/defrem.h.
From John Gray <jgray@azuli.co.uk>
which covers some recent installation schemes.
Add Mandrake installation layout to directories to check for stylesheets.
Allow documentation build to proceed if stylesheets were not found, in case
the stylesheets might be found through the SGML catalog mechanism.
some old code to add PK constraints to CREATE TABLE. That stuff
had been removed as part of my original patch for pg_dump a
little while ago.
The attached patch fixes this by removing (again :-) ) the
code in dumpTables() to perform PK creation during CREATE
TABLE. I briefly tested it locally and it fixes both of
Tom's test cases.
Please apply.
Cheers,
Neil
--
Neil Conway <neilconway@rogers.com>
for Solaris on SPARC. Scott Brunza (sbrunza@sonalysts.com) gets
credit for identifying the issue, making the change, and doing
the regression tests.
Earlier testing on 7.2rc2 and 7.2 showed performance gains of
1% to 10% on pgbench, osdb-pg, and some locally developed apps.
Solaris Intimate Shared Memory is described in "SOLARIS INTERNALS
Core Kernel Components" by Jim Mauro and Richard McDougall,
Copyright 2001 Sun Microsystem, Inc. ISBN 0-13-022496-0
P.J. "Josh" Rovero
entries, per pghackers discussion. This fixes aggregates to live in
namespaces, and also simplifies/speeds up lookup in parse_func.c.
Also, add a 'proimplicit' flag to pg_proc that controls whether a type
coercion function may be invoked implicitly, or only explicitly. The
current settings of these flags are more permissive than I would like,
but we will need to debate and refine the behavior; for now, I avoided
breaking regression tests as much as I could.
This is necessary for mulibyte character sequences.
See "[HACKERS] PQescapeBytea is not multibyte aware" thread posted around
2002/04/05 for more details.
the decision not to make renamerel() update the sequence name that
is stored within sequences themselves (thanks to Tom Lane), and adds
some rudimentary regression tests for ALTER TABLE ... RENAME on
non-table relations.
Neil Conway
insert on a view), and noticed that psql wouldn't show the list of rules
set up on a view, like it does for tables.
The fix was extremely simple, so I figured I'd share it. Not sure what
the standard is for communicating these things, so I've attached the diff
file for /src/bin/psql/describe.c.
Paul (?)
file, which is not the actual end of the file. One side effect of that
is that if you are i n a ifdef block, you get a wrong error telling you
that a endif is missing.
This patch corrects pgc.l and also adds a test of this problem to
test1.pgc. To convince you apply the patch to test1.pgc first then try
to compile the test the n apply the patch to pgc.l.
The patch moves the test of the scope of an ifdef block to the end of
the file b eeing parsed, including all includes files, ... .
Nicolas Bazin
The patch enables the mips2 ISA for the ll/sc operations, and then restores
it when done. The kernel/libc emulation code will take over on CPUs without
ll/sc, and on CPUs with it, it'll use the operations provided by the CPU.
Combined with the earlier fix (removing -mips2), postgresql builds again on
mips and mipsel. The patch is against 7.2-7.
Oliver Elphick
INSERT statements to the planner. Taking it out of the parser was right
(so that defaults don't get into stored rules), but it has to happen
before rewrite rule expansion, else references to NEW.field behave
incorrectly. Accordingly, add a step to the rewriter to insert defaults
just before rewrite-rule expansion.
volatile), rather than the old cachable/noncachable distinction. This
allows indexscan optimizations in many places where we formerly didn't.
Also, add a pronamespace column to pg_proc (it doesn't do anything yet,
however).
records containing apostrophes in text fields without altering the appearance
of the entry in the GUI interface (by copying the fldval to fldvalfixed).
This will alleviate the need for users to create a record and then go back to
edit apostrophes into the text they entered.
Ryan Grange
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
From: Bradley McLean <brad@bradm.net>
Patch against 7,2 submitted for comment.
This seems to work just fine; Now, when our users submit a 2 hour
query with four million row sorts by accident, then cancel it 30 seconds
later, it doesn't bog down the server ...
wrapped-around databases. The unvacuumed databases might be fine, or
they might not, but things will definitely not be fine if we remove the
wrong CLOG segments. Per trouble report from Gary Wolfe, 1-Apr-2002.
depend on this rather than the trigger argument strings to locate the
other relation to test. This makes RI triggers function properly in
the presence of schemas and temp tables. Along the way, fix bogus lack
of locking in RI triggers, handle quoting of names fully correctly,
compute required sizes of query buffers with some semblance of accuracy.
path. The default behavior if no per-user schemas are created is that
all users share a 'public' namespace, thus providing behavior backwards
compatible with 7.2 and earlier releases. Probably the semantics and
default setting will need to be fine-tuned, but this is a start.
2) Implement some options for SQLGetDescField().
3) Handle *Inifinity* timestamp for SQL_C_CHAR type output.
4) Separate Unicode conversions from common implementations.
5) Improve internal parse_statement() function.
catalog namespace. This will not do as a production solution because
the interpretation of RI trigger arguments will vary depending on the
current namespace search path. I'm just putting it in so that the RI
regression tests don't fail while schema development proceeds. We
must find a better answer before 7.3 can be released.
sequence functions how to cope with qualified names. Same code is
also used for int4notin, currtid_byrelname, pgstattuple. Also,
move TOAST tables into special pg_toast namespace.
1) Prepare to separate 4 kinds of Descriptor handles.
2) Detect the transaction status more naturally.
3) Improve Parse Statement functionality for the use
of updatable cursors.
4) Improve updatable cursors.
5) Implement SQLGetDescField() and improve SQLColAttribute().
6) etc.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
addRangeTableEntry calls. Remove relname field from RTEs, since
it will no longer be a useful unique identifier of relations;
we want to encourage people to rely on the relation OID instead.
Further work on dumping qual expressions in EXPLAIN, too.
objects to be privilege-checked. Some change in their APIs would be
necessary no matter what in the schema environment, and simply getting
rid of the name-based interface entirely seems like the best way.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
these versions adhere to the backend protocol better than previous version
fixes problem when an error occurs on the backend, and the connection is still used
previous versions were throwing an exception half way through the protocol, leaving it
indeterminate.
also removes empty query code, should speed things up a bit
* Introduces a new class, StartupPacket.
* Moves a lot of constants from Connection to StartupPacket.
* Makes two instance variables in Connection into locals.
in the current code, the authentication logic (check user, check the
relation we're operating on, etc) is done in tcop/utility.c, whereas the
actual TRUNCATE command in done in TruncateRelation() in
commands/createinh.c (which is really just a wrapper over
heap_truncate() in catalog/heap.c). This patch moves the authentication
logic into TruncateRelation(), as well as making some minor code
cleanups.
Neil Conway
* We should not even consider checking the row if it is no longer
* valid since it was either deleted (doesn't matter) or updated
* (in which case it'll be checked with its final values).
Stephan Szabo
>
> I am running Python 1.5.
Therein lies the problem... :)
Since it appears you have the requirement of supporting old python
versions, attached is just the pgdb.py part of the patch (with a fix for
DateTime handling). It has the same functionality but certainly won't be
quite as fast. Given the absence of _PyString_Join in python1.5, it's a
pain to get the C variants working for all versions. The pgdb.py patch
does leaves the hooks in, should someone wish to do the optimization at a
later point.
Elliot Lee
If one is trying to compile a JDBC 1 driver and junit.jar is in the
CLASSPATH, then the build fails as ant tries to build the JDBC 2 test
classes. This patch fixes this problem by excluding the jdbc 2 files
unless the jdk1.2+ property is set.
before a data item is now always skipped, rather than only sometimes.
Backslashes not within double-quoted text are treated reasonably, as
are multiple sequences of quoted text in a single data item. But it
still seems rather prone to misbehavior if the input is not completely
syntactically correct --- in particular, garbage following a right brace
will be ignored.
previously it was throwing a SQLException as soon as the error message was
received from the backend. This did not allow the protocol to finish properly
now, simply collects error messages from the backend until the query is done
and throws exception at the end
Also added setLogLevel to Driver.java, and made the log levels public
per recent pghackers discussion: force a new WAL record at first nextval
after a checkpoint, and ensure that xlog is flushed to disk if a nextval
record is the only thing emitted by a transaction.
src/GNUmakefile.in to src/Makefile
and
src/backend/port/Makefile.in to src/backend/port/Makefile
All configure substitutions are now done in Makefile.global.
now has an RTE of its own, and references to its outputs now are Vars
referencing the JOIN RTE, rather than CASE-expressions. This allows
reverse-listing in ruleutils.c to use the correct alias easily, rather
than painfully reverse-engineering the alias namespace as it used to do.
Also, nested FULL JOINs work correctly, because the result of the inner
joins are simple Vars that the planner can cope with. This fixes a bug
reported a couple times now, notably by Tatsuo on 18-Nov-01. The alias
Vars are expanded into COALESCE expressions where needed at the very end
of planning, rather than during parsing.
Also, beginnings of support for showing plan qualifier expressions in
EXPLAIN. There are probably still cases that need work.
initdb forced due to change of stored-rule representation.
1) Put back the error message for SQLError().
2) Change Disallow premature to handle the SELECTed
result.
3) Put back the behavior of AUTUCOMMIT mode change.
4) Fix SQLColumns for ODBC3.0.
5) Improve the handling of variable bookmark in ODBC3.0.
6) Enable Recognize Unique Index Button.
PostgreSQL. This hash function replaces the one used by hash indexes and
the catalog cache. Hash joins use a different, relatively poor-quality
hash function, but I'll fix that later.
As suggested by Tom Lane, this patch also changes the size of the fixed
hash table used by the catalog cache to be a power-of-2 (instead of a
prime: I chose 256 instead of 257). This allows the catcache to lookup
hash buckets using a simple bitmask. This should improve the performance
of the catalog cache slightly, since the previous method (modulo a
prime) was slow.
In my tests, this improves the performance of hash indexes by between 4%
and 8%; the performance when using btree indexes or seqscans is
basically unchanged.
Neil Conway <neilconway@rogers.com>
so index is not on table during COPY.
> > AFAICT, the patch I posted to -patches a little while to enable the
> > usage of ALTER TABLE ADD PRIMARY KEY by pg_dump hasn't been applied, nor
> > is it in the unapplied patches list. I was under the impression that
> > this was in the queue for application -- did it just get lost?
Neil Conway <neilconway@rogers.com>
- domain.patch -> source patch against pgsql in cvs
- drop_domain.sgml and create_domain.sgml -> New doc/src/sgml/ref docs
- dominfo.txt -> basic domain related queries I used for testing
[ ADDED TO /doc]
Enables domains of array elements -> CREATE DOMAIN dom int4[3][2];
Uses a typbasetype column to describe the origin of the domain.
Copies data to attnotnull rather than processing in execMain().
Some documentation differences from earlier.
If this is approved, I'll start working on pg_dump, and a \dD <domain>
option in psql, and regression tests. I don't really feel like doing
those until the system table structure settles for pg_type.
CHECKS when added, will also be copied to to the table attributes. FK
Constraints (if I ever figure out how) will be done similarly. Both
will lbe handled by MergeDomainAttributes() which is called shortly
before MergeAttributes().
Rod Taylor
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
parts o f postgresql. The jdbc drivers are never compiled with debugging
support. This p atch make sure that debugging information is added to
the jdbc jar when the --en able-debug is added. This was usefull for me
for debugging some java jdbc poolin g objects but this might perhaps be
usefull for other people too?
Dries Verachtert
> > > > It was made to cope with encoding such as an Asian bloc in 7.2Beta2.
> > > >
> > > > Added ServerEncoding
> > > > Korean (JOHAB), Thai (WIN874),
> > > > Vietnamese (TCVN), Arabic (WIN1256)
> > > >
> > > > Added ClientEncoding
> > > > Simplified Chinese (GBK), Korean (UHC)
> > > >
> > > >
> > > >
> http://www.sankyo-unyu.co.jp/Pool/postgresql-7.2b2.newencoding.diff.tar.gz
> > > > (608K)
> > >
> > > Looks good. I need some people to review this for me.
> >
> > For me they look good too. The only missing part is a
> > documentation. I will ask him to write it up. If he couldn't, I will
> > do it for him.
> > > The diff is 3mb
> > > but appears to address only additions to multibyte. I have attached a
> > > list of files it modifies. Also, look at the sizes of the mb/
> > > directory. It is getting large:
> > >
> > > 4 ./CVS
> > > 6 ./Unicode/CVS
> > > 3433 ./Unicode
> > > 6197 .
> >
> > Yes. We definitely need the on-the-fly encoding addition capability:
> > i.e. CREATE CHRACTER SET in the future...
> > --
> > Tatsuo Ishii
> >
> >
Address chainge.
http://www.sankyo-unyu.co.jp/Pool/postgresql-7.2.newencoding.diff.gz
Add PsqlODBC and document ...etc patch.
Eiji Tokuya
(current as of a few hours ago.)
This patch:
1. Adds PG_GETARG_xxx_P_SLICE() macros and associated support routines.
2. Adds routines in src/backend/access/tuptoaster.c for fetching only
necessary chunks of a toasted value. (Modelled on latest changes to
assume chunks are returned in order).
3. Amends text_substr and bytea_substr to use new methods. It now
handles multibyte cases -and should still lead to a performance
improvement in the multibyte case where the substring is near the
beginning of the string.
4. Added new command: ALTER TABLE tabname ALTER COLUMN colname SET
STORAGE {PLAIN | EXTERNAL | EXTENDED | MAIN} to parser and documented in
alter-table.sgml. (NB I used ColId as the item type for the storage
mode string, rather than a new production - I hope this makes sense!).
All this does is sets attstorage for the specified column.
4. AlterTableAlterColumnStatistics is now AlterTableAlterColumnFlags and
handles both statistics and storage (it uses the subtype code to
distinguish). The previous version of my patch also re-arranged other
code in backend/commands/command.c but I have dropped that from this
patch.(I plan to return to it separately).
5. Documented new macros (and also the PG_GETARG_xxx_P_COPY macros) in
xfunc.sgml. ref/alter_table.sgml also contains documentation for ALTER
COLUMN SET STORAGE.
John Gray
"bad smell" in that code. Stuff like function parameters that aren't
used, typos in the comments, comparison between signed and unsigned
ints, etc.
Attached is a pretty trivial patch; it compiles, but beyond that
completely untested. Unless anyone sees any problems, please apply for
7.3.
Neil Conway
queries over non-blocking connections with libpq. "Larger" here
basically means that it doesn't fit into the output buffer.
The basic strategy is to fix pqFlush and pqPutBytes.
The problem with pqFlush as it stands now is that it returns EOF when an
error occurs or when not all data could be sent. The latter case is
clearly not an error for a non-blocking connection but the caller can't
distringuish it from an error very well.
The first part of the fix is therefore to fix pqFlush. This is done by
to renaming it to pqSendSome which only differs from pqFlush in its
return values to allow the caller to make the above distinction and a
new pqFlush which is implemented in terms of pqSendSome and behaves
exactly like the old pqFlush.
The second part of the fix modifies pqPutBytes to use pqSendSome instead
of pqFlush and to either send all the data or if not all data can be
sent on a non-blocking connection to at least put all data into the
output buffer, enlarging it if necessary. The callers of pqPutBytes
don't have to be changed because from their point of view pqPutBytes
behaves like before. It either succeeds in queueing all output data or
fails with an error.
I've also added a new API function PQsendSome which analogously to
PQflush just calls pqSendSome. Programs using non-blocking queries
should use this new function. The main difference is that this function
will have to be called repeatedly (calling select() properly in between)
until all data has been written.
AFAICT, the code in CVS HEAD hasn't changed with respect to non-blocking
queries and this fix should work there, too, but I haven't tested that
yet.
Bernhard Herzog
three-or-more-way UNIONs, as per example from Josh Berkus. Cause is a
fragile assumption that one tlist's entries will exactly match another.
Restructure code to make that assumption a little less fragile.
An attached patch corrects problem of this bug and fractional second.
The handling of time zone was as follows:
(a) with time zone
using SimpleDateFormat("yyyy-MM-dd HH:mm:ss z")
(b) without time zone
using SimpleDateFormat("yyyy-MM-dd HH:mm:ss")
About problem of fractional second,
Fractional second was changed from milli-second to nano-second
Elliot Lee wrote:
> This patch to the python bindings adds C versions of the often-used
query
> args quoting routines, as well as support for quoting lists e.g.
> dbc.execute("SELECT * FROM foo WHERE blah IN %s", ([1,2,3],))
timestamp/timestamptz combo. Now extract/date_part returns
seconds*1000 or 1000000 + fraction part as the manual stats.
regression test are also fixed.
See the thread in pgsql-hackers:
Subject: Re: [HACKERS] timestamp_part() bug?
Date: Sat, 02 Mar 2002 11:29:53 +0900
when to send what to which, prevent recursion by introducing new COMMERROR
elog level for client-communication problems, get rid of direct writes
to stderr in backend/libpq files, prevent non-error elogs from going to
client during the authentication cycle.
speed up repetitive failed searches; per pghackers discussion in late
January. inval.c logic substantially simplified, since we can now treat
inserts and deletes alike as far as inval events are concerned. Some
repair work needed in heap_create_with_catalog, which turns out to have
been doing CommandCounterIncrement at a point where the new relation has
non-self-consistent catalog entries. With the new inval code, that
resulted in assert failures during a relcache entry rebuild.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
both input streams to the end. If one variable's range is much less
than the other, an indexscan-based merge can win by not scanning all
of the other table. Per example from Reinhard Max.
before reporting command-complete message for the final command of a
query string. This way, any errors detected during finish_xact_command
(such as RI violations) will appear to be part of the final command,
rather than coming out after the command is reported complete. This
avoids confusing PQendcopy and other not-overly-bright clients.
Per Lee Harr's bug report of 25-Feb-02.
matches the sequence name from pg_class. This fails if the sequence has
been renamed, and seems rather pointless in any case.
Also improve a couple of error messages about inconsistencies.
are now both invoked once per received SQL command (raw parsetree) from
pg_exec_query_string. BeginCommand is actually just an empty routine
at the moment --- all its former operations have been pushed into tuple
receiver setup routines in printtup.c. This makes for a clean distinction
between BeginCommand/EndCommand (once per command) and the tuple receiver
setup/teardown routines (once per ExecutorRun call), whereas the old code
was quite ad hoc. Along the way, clean up the calling conventions for
ExecutorRun a little bit.
report for each received SQL command, regardless of rewriting activity.
Also ensure that this report comes from the 'original' command, not the
last command generated by rewrite; this fixes 7.2 breakage for INSERT
commands that have actions added by rules. Fernando Nasser and Tom Lane.
names. This is a temporary measure to allow backwards compatibility with
7.2 and earlier pg_dump. 7.2.1 and later pg_dump will double-quote mixed
case names in \connect. Once we feel that older dumps are not a problem
anymore, we can revert this change and treat \connect arguments as normal
SQL identifiers.
> and that the right fix is to make each of the subsequent calls be in
> this same pattern, not to try to emulate their nonsensical style.
Dominic J. Eidson
by making the static variables extra_before and extra_after
automatic so we can use recursion.
It gets much easier to generate extra commands now, and one can rest
assured that the extra commands will be properly analyzed/rewritten.
Without this patch, if a command produced by transformation tries to
use these static lists their first contents would be lost with
unpredictable results. I know I could fix this by just using nconc()
instead of assignments, but the resulting order of the commands would
not be exactly what one could expect.
--
Fernando Nasser
hashname() and reduce the penalty incured when NAMEDATALEN is increased.
I posted this to -hackers a couple days ago, and there haven't been any
major complaints. It passes the regression tests. See -hackers for more
discussion, as well as the suggestion from Tom Lane on which this patch
is based.
Unless anyone sees any problems, please apply for 7.3.
Cheers,
Neil Conway
DATABASE; also make it use SET SESSION AUTHORIZATION commands rather than
\connect commands. This makes it possible to restore databases belonging
to users who do not have CREATEDB privilege. It should also become at
least somewhat feasible to run the restore script under password
authentication --- you'll get one superuser password prompt per database,
rather than a large number of challenges for passwords belonging to
varying unspecified user names.
The attached patch enables plperl to build under Cygwin. It is
basically yet another BE_DLLLIBS patch with a perl MakeMaker twist. I
tried the patch under Red Hat 7.1 Linux too and I did not observe any
ill effects.
Jason Tishler
patch is low risc, thus could be applied now, but can also wait for 7.3
Old Makefile shows, that -bnoentry is available since 4.1 .
Andreas Zeugswetter