Previously an "amcanorderbyop" index would only be used when the index
could provide sorted results which satisfied all query_pathkeys. Here
we relax this so that we also allow these indexes to be considered by the
planner when they only provide partially sorted results. This allows the
planner to later consider making use of an Incremental Sort to satisfy the
remaining pathkeys. This change is particularly useful for KNN-type
queries which contain a LIMIT clause and an additional ORDER BY clause for
a non-indexed column.
Author: Miroslav Bendik
Reviewed-by: Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAPoEpV0QYDtzjwamwWUBqyWpaCVbJV2d6qOD7Uy09bWn47PJtw%40mail.gmail.com
The following routines are added to libpq:
PGresult *PQclosePrepared(PGconn *conn, const char *stmt);
PGresult *PQclosePortal(PGconn *conn, const char *portal);
int PQsendClosePrepared(PGconn *conn, const char *stmt);
int PQsendClosePortal(PGconn *conn, const char *portal);
The "send" routines are non-blocking versions of the two others.
Close messages are part of the protocol but they did not have a libpq
implementation. And, having these routines is for instance useful with
connection poolers as these can detect more easily Close messages
than DEALLOCATE queries.
The implementation takes advantage of what the Describe routines rely on
for portals and statements. Some regression tests are added in
libpq_pipeline, for the four new routines, by closing portals and
statements created already by the tests.
Author: Jelte Fennema
Reviewed-by: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CAGECzQTb4xFAopAVokudB+L62Kt44mNAL4Z9zZ7UTrs1TRFvWA@mail.gmail.com
It's OK to be lazy about re-binning memory segments when allocating,
because that can only leave segments in a bin that's too high. We'll
search higher bins if necessary while allocating next time, and
also eventually re-bin, so no memory can become unreachable that way.
However, when freeing memory, the largest contiguous range of free pages
might go up, so we should re-bin eagerly to make sure we don't leave the
segment in a bin that is too low for get_best_segment() to find.
The re-binning code is moved into a function of its own, so it can be
called whenever free pages are returned to the segment's free page map.
Back-patch to all supported releases.
Author: Dongming Liu <ldming101@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAL1p7e8LzB2LSeAXo2pXCW4%2BRya9s0sJ3G_ReKOU%3DAjSUWjHWQ%40mail.gmail.com
Prior to this, Bitmapsets could contain trailing words which had no
members set. Many places in bitmapset.c had to loop over trailing words
to check for empty words. If we ensure we always remove these trailing
zero words then we can perform various optimizations such as fast
pathing bms_is_subset to return false when 'a' has more words than 'b'.
A similar optimization is possible in bms_equal. Both of these together
can yield quite significant performance increases in the query planner
when querying a partitioned table with around 100 or more partitions.
While we're at it, since the minimum number of words a Bitmapset can
contain is 1, we can make use of do/while loops instead of for loops
when looping over all words in a set. This means checking the loop
condition 1 less time, which for single-word sets cuts the loop
condition checks in half.
Author: David Rowley
Reviewed-by: Yuya Watari
Discussion: https://postgr.es/m/CAApHDvr5O41MuUjw0DQKqmAnv7QqvmLqXReEd5o4nXTzWp8-+w@mail.gmail.com
The tests of unaccent rely on UTF8 characters, and unlike any other test
suite in the tree (fuzzystrmatch, citext, hstore, etc.), they would fail
if run on a database that does not support UTF8 encoding.
This commit fixes the tests of unaccent so as these are skipped when run
on a database without UTF8 support, using the same method as the other
test suits based on \if, getdatabaseencoding() and an alternate output
file.
This has been broken for a long time, but nobody has complained about
that either, so no backpatch is done. This can be reproduced with
something like REGRESS_OPTS="--no-locale --encoding=sql_ascii", for
instance. To defend against that, this module's Makefile and
meson.build enforced a UTF8 encoding without locales, but it did not
offer protection for options given by REGRESS_OPTS. This switch makes
this regression test suite more consistent with all the others, as
well.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/ZIq1HUnIV2ksW85x@paquier.xyz
Like bison, this is useful to know which version and command of flex are
detected by meson. For example, this was useful for me when using
win_flex.exe on Windows.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/ZDT3FbmrjBuBthmR@paquier.xyz
This commit increases the size of the bgw_library_name member of
the BackgroundWorker struct from BGW_MAXLEN (96) bytes to MAXPGPATH
(default of 1024) bytes so that it can store longer file names
(e.g., absolute paths).
Author: Yurii Rashkovskii
Reviewed-by: Daniel Gustafsson, Aleksander Alekseev
Discussion: https://postgr.es/m/CA%2BRLCQyjFV5Y8tG5QgUb6gjteL4S3p%2B1gcyqWTqigyM93WZ9Pg%40mail.gmail.com
The ginfast.c code previously checked for conflicts in before locking
the relevant buffer, leaving a window where a RW conflict could be
missed. Re-order.
There was also a place where buffer ID and block number were confused
while trying to predicate-lock a page, noted by visual inspection.
Back-patch to all supported releases. Fixes one more problem discovered
with the reproducer from bug #17949, in this case when Dmitry tried
other index types.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reported-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
When performing a bitmap heap scan, we don't want to miss concurrent
writes that occurred after we observed the heap's rs_nblocks, but before
we took predicate locks on index pages. Therefore, we can't skip
fetching any heap tuples that are referenced by the index, because we
need to test them all with CheckForSerializableConflictOut(). The
old optimization that would ignore any references to blocks >=
rs_nblocks gets in the way of that requirement, because it means that
concurrent writes in that window are ignored.
Removing that optimization shouldn't affect correctness at any isolation
level, because any new tuples shouldn't be visible to an MVCC snapshot.
There also shouldn't be any error-causing references to heap blocks past
the end, because we should have held at least an AccessShareLock on the
table before the index scan. It can't get smaller while our transaction
is running. For now, though, we'll keep the optimization at lower
levels to avoid making unnecessary changes in a bug fix.
Back-patch to all supported releases. In release 11, the code is in a
different place but not fundamentally different. Fixes one aspect of
bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
When predicate-locking btrees, we have a special case for completely
empty btrees, since there is no page to lock. This was racy, because,
without buffer lock held, a matching key could be inserted between the
_bt_search() and the PredicateLockRelation() calls.
Fix, by rechecking _bt_search() after taking the relation-level SIREAD
lock, if using SERIALIZABLE isolation and an empty btree is discovered.
Back-patch to all supported releases. Fixes one aspect of bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
Unlike commands such as CREATE DATABASE, ProcessStartupPacket()
does not perform multibyte-aware truncation of overlength names.
This means that connection attempts might fail even if the user
provides the same overlength names that were used in CREATE
DATABASE, CREATE ROLE, etc. Ideally, we'd do the same multibyte-
aware truncation in both code paths, but it doesn't seem worth the
added complexity of trying to discover the encoding of the names.
Instead, let's simply skip truncating the names in the startup
packet and let the user/database lookup fail later on. With this
change, users must provide the exact names stored in the catalogs,
even if the names were truncated.
This reverts commit d18c1d1f51.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/07436793-1426-29b2-f924-db7422a05fb7%40gmail.com
When table_block_relation_estimate_size() estimated the number of tuples
in a relation without statistics (e.g. right after load), it did not
consider fillfactor when calculating density. With non-default
fillfactor values, this may result in significant overestimate of the
number of tuples - up to 10x with the minimum 10% fillfactor. This may
have unexpected consequences, e.g. when creating hash indexes.
This considers the current fillfactor value in the "no statistics" code
path. If the fillfactor changes after loading data into the table, the
estimate may be off. But that seems much less likely than changing the
fillfactor before the data load.
Reviewed-by: Corey Huinker, Peter Eisentraut
Discussion: https://postgr.es/m/cf154ef9-6bac-d268-b735-67a3443debba@enterprisedb.com
The test inserted 70k rows into a foreign table, in order to verify
correct behavior with more than 65535 parameters, and was added in
response to a bug report.
However, this is rather expensive, especially when running the tests
under valgrind, CLOBBER_CACHE_ALWAYS etc. It doesn't seem worth it to
keep running the test, so remove it from all branches (14+).
Backpatch-through: 14
Discussion: https://postgr.es/m/2131017.1623451468@sss.pgh.pa.us
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
The VacAttrStats structure contained the whole Form_pg_attribute for a
column, but it actually only needs attstattarget from there. So
remove the Form_pg_attribute field and make a separate field for
attstattarget. This simplifies some code for extended statistics that
doesn't deal with a column but an expression, which had to fake up
pg_attribute rows to satisfy internal APIs. Also, we can remove some
comments that essentially said "don't look at pg_attribute directly".
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/d6069765-5971-04d3-c10d-e4f7b2e9c459%40eisentraut.org
Here are some notes about this change:
- As X509_get_signature_nid() should always exist (OpenSSL and
LibreSSL), hence HAVE_X509_GET_SIGNATURE_NID is now gone.
- OPENSSL_API_COMPAT is bumped to 0x10002000L.
- One comment related to 1.0.1e introduced by 74242c2 is removed.
Upstream OpenSSL still provides long-term support for 1.0.2 in a closed
fashion, so removing it is out of scope for a few years, at least.
Reviewed-by: Jacob Champion, Daniel Gustafsson
Discussion: https://postgr.es/m/ZG3JNursG69dz1lr@paquier.xyz
The following changes are done:
- Addition of WaitEventBufferPin and WaitEventExtension, that hold a
list of wait events related to each category.
- Addition of two functions that encapsulate the list of wait events for
each category.
- Rename BUFFER_PIN to BUFFERPIN (only this wait event class used an
underscore, requiring a specific rule in the automation script).
These changes make a bit easier the automatic generation of all the code
and documentation related to wait events, as all the wait event
categories are now controlled by consistent structures and functions.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/c6f35117-4b20-4c78-1df5-d3056010dcf5@gmail.com
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
When set, this environment variable was only effective for data
directories but not for all the other temporary files created by
PostgreSQL::Test::Utils. Keeping the temporary files after a successful
run can be useful for debugging purposes.
The documentation is updated to reflect the new behavior, with contents
available in doc/ since v16 and in src/test/perl/README since v15.
Author: Jacob Champion
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CAAWbhmgHtDH1SGZ+Fw05CsXtE0mzTmjbuUxLB9mY9iPKgM6cUw@mail.gmail.com
Discussion: https://postgr.es/m/YyPd9unV14SX2bLF@paquier.xyz
Backpatch-through: 11
Here we adjust the query planner to have it remove items from a window
clause's PARTITION BY clause in cases where the pathkey for a column in
the PARTITION BY clause is redundant.
Doing this allows the optimization added in 9d9c02ccd to stop window
aggregation early rather than going into "pass-through" mode to find
tuples belonging to the next partition. Also, when we manage to remove
all PARTITION BY columns, we now no longer needlessly check that the
current tuple belongs to the same partition as the last tuple in
nodeWindowAgg.c. If the pathkey was redundant then all tuples must
contain the same value for the given redundant column, so there's no point
in checking that during execution.
Author: David Rowley
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/CAApHDvo2ji+hdxrxfXtRtsfSVw3to2o1nCO20qimw0dUGK8hcQ@mail.gmail.com
Commit dd38ff28ad added a new error message "missing contrecord" when
we fail to reassemble a record. Unfortunately that caused noisy
messages to be logged by pg_waldump at end of segment, and by walsender
when asked to shut down on a segment boundary.
Remove the new error message, so that this condition signals end-of-
WAL without a message. It's arguably a reportable condition that should
not be silenced while performing crash recovery, but fixing that without
introducing noise in the other cases will require more research.
Back-patch to 15.
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/6a1df56e-4656-b3ce-4b7a-a9cb41df8189%40enterprisedb.com
Commit f24523672d fixed a memory leak by moving the modifiedCols bitmap
into the per-row memory context. In the case of AFTER UPDATE triggers,
the bitmap is however referenced from an event kept until the end of the
query, resulting in a use-after-free bug.
Fixed by copying the bitmap into the AfterTriggerEvents memory context,
which is the one where we keep the trigger events. There's only one
place that needs to do the copy, but the memory context may not exist
yet. Doing that in a separate function seems more readable.
Report by Alexander Pyhalov, fix by me. Backpatch to 13, where the
bitmap was added to the event by commit 71d60e2aa0.
Reported-by: Alexander Pyhalov
Backpatch-through: 13
Discussion: https://postgr.es/m/acddb17c89b0d6cb940eaeda18c08bbe@postgrespro.ru
The Incremental Sort had a couple issues, resulting in leaking memory
during rescans, possibly triggering OOM. The code had a couple of
related flaws:
1. During rescans, the sort states were reset but then also set to NULL
(despite the comment saying otherwise). ExecIncrementalSort then
sees NULL and initializes a new sort state, leaking the memory used
by the old one.
2. Initializing the sort state also automatically rebuilt the info about
presorted keys, leaking the already initialized info. presorted_keys
was also unnecessarily reset to NULL.
Patch by James Coleman, based on patches by Laurenz Albe and Tom Lane.
Backpatch to 13, where Incremental Sort was introduced.
Author: James Coleman, Laurenz Albe, Tom Lane
Reported-by: Laurenz Albe, Zu-Ming Jiang
Backpatch-through: 13
Discussion: https://postgr.es/m/b2bd02dff61af15e3526293e2771f874cf2a3be7.camel%40cybertec.at
Discussion: https://postgr.es/m/db03c582-086d-e7cd-d4a1-3bc722f81765%40inf.ethz.ch
Per the code coverage report, the existing regression tests did not
exercice some a couple important BRIN minmax-multi code paths.
- The tests focused on testing planning with a range of scan key
strategies, but not the execution. Fixed by adding queries that
actually test query execution for both equality and inequality.
- All tests created indexes after inserting data, but this only
exercises the CREATE INDEX strategy that sees all values at once, not
incremental summary updates. The new tests flip the order and create
the index before adding data.
- The assert check(s) validating correctness of expanded ranges were
present only in the "union" code path, which is not covered by
regression tests at all (as it requires concurrency etc.). Fixed by
adding the asserts to a couple more places.
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/57020b2e-d9c9-9bc7-4892-b36d9bb07563%40enterprisedb.com
Move the calculation of Bloom filter parameters (for BRIN indexes) into
a separate function to make reuse easier. At the moment we only call it
from one place, but that may change and it's easier to read anyway.
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/0e1f3350-c9cf-ab62-43a5-5dae314de89c%40enterprisedb.com
BRIN bloom and minmax-multi opclasses were somewhat inconsistent when
dealing with bool variables, assigning to them Datum values etc. While
not a bug, it makes the code harder to understand, so fix that.
While at it, update an incorrect comment copied to bloom opclass from
minmax, talking about strategies not supported by bloom.
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/0e1f3350-c9cf-ab62-43a5-5dae314de89c%40enterprisedb.com
a316a3bc fixed the code in build_simpl_rel() that propagates
RelOptInfo.userid from parent to child rels so that it works
correctly for the child rels of a UNION ALL subquery rel, though
no tests were added in that commit. So do so here.
As noted in the discussion, coming up with a test case in the core
regression suite for this fix has turned out to be tricky, so the
test case is added to the postgres_fdw's suite instead.
postgresGetForeignRelSize()'s use of user mapping for the user
specified in RelOptInfo.userid makes it relatively easier to craft
a test case around.
Discussion: https://postgr.es/m/CA%2BHiwqH91GaFNXcXbLAM9L%3DzBwUmSyv699Mtv3i1_xtk9Xec_A%40mail.gmail.com
Backpatch-through: 16
This patch is a preliminary refactoring for an upcoming patch aimed at
adding new options to this tool, and using long options for these is
more user-friendly. The existing short options gain long flavors, as
of:
* -d/--debug
* -n/--dry-run
* -x/--strip-extension
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
The logic that introduced partitioned indexes missed a few things when
invalidating a partitioned index when these are created, still the code
is written to handle recursions:
1) If created from scratch because a mapping index could not be found,
the new index created could be itself invalid, if for example it was a
partitioned index with one of its leaves invalid.
2) A CCI was missing when indisvalid is set for a parent index, leading
to inconsistent trees when recursing across more than one level for a
partitioned index creation if an invalidation of the parent was
required.
This could lead to the creation of a partition index tree where some of
the partitioned indexes are marked as invalid, but some of the parents
are marked valid, which is not something that should happen (as
validatePartitionedIndex() defines, indisvalid is switched to true for a
partitioned index iff all its partitions are themselves valid).
This patch makes sure that indisvalid is set to false on a partitioned
index if at least one of its partition is invalid. The flag is set to
true if *all* its partitions are valid.
The regression test added in this commit abuses of a failed concurrent
index creation, marked as invalid, that maps with an index created on
its partitioned table afterwards.
Reported-by: Alexander Lakhin
Reviewed-by: Alexander Lakhin
Discussion: https://postgr.es/m/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
The following patterns are added for CREATE SCHEMA:
- AUTHORIZATION, without a schema name or after a schema name.
- Possible list of owner roles after AUTHORIZATION.
- CREATE and GRANT within the supported set of commands.
- Correct object types supported in an embedded CREATE SCHEMA command.
While on it, this commit adjusts the completion done after CREATE
UNLOGGED:
- Addition of SEQUENCE.
- Avoid suggesting MATERIALIZED VIEW in CREATE TABLE.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Suraj Khamkar, Michael Paquier
Discussion: https://postgr.es/m/8735snihmz.fsf@wibble.ilmari.org
Using at least perl 5.14 is required since 4c15327, meaning that it is
possible to use named captures and the %+ hash instead of having to
count parenthesis groups manually.
While on it, CATALOG is made more flexible in its handling of
whitespaces for parameter lists (see the addition of \s* in this
case). The generated postgres.bki remains exactly the same before and
after this commit.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/87y1l3s7o9.fsf@wibble.ilmari.org
ALTER TABLE .. SET ACCESS METHOD was not registering a dependency to the
new access method with the relation altered in its rewrite phase, making
possible the drop of an access method even if there are relations that
depend on it. During the rewrite, a temporary relation is created to
build the new relation files before swapping the new and old files, and,
while the temporary relation was registering a correct dependency to the
new AM, the old relation did not do that. A dependency on the access
method is added when the relation files are swapped, which is the point
where pg_class is updated.
Materialized views and tables use the same code path, hence both were
impacted.
Backpatch down to 15, where this command has been introduced.
Reported-by: Alexander Lakhin
Reviewed-by: Nathan Bossart, Andres Freund
Discussion: https://postgr.es/m/18000-9145c25b1af475ca@postgresql.org
Backpatch-through: 15
run_command(check: true) already would have errorred out before the check is
reached.
Author: Tristan Partin <tristan@neon.tech>
Discussion: CSPIJVUDZFKX.3KHMOAVGF94RV@c3po
An outer join cannot be formed using an input path that is parameterized
by a value that is supposed to be nulled by the outer join. This is
obviously nonsensical, and it could lead to a bad plan being selected;
although currently it seems that we'll hit various sanity-check
assertions first.
I think that such cases were formerly prevented by the delay_upper_joins
mechanism, but now that that's gone we need an explicit check.
(Perhaps we should avoid generating baserel paths that could
lead to this situation in the first place; but it seems like
having a defense at the join level would be a good idea anyway.)
Richard Guo and Tom Lane, per report from Jaime Casanova
Discussion: https://postgr.es/m/CAJKUy5g2uZRrUDZJ8p-=giwcSHVUn0c9nmdxPSY0jF0Ov8VoEA@mail.gmail.com
If the given composite datum is toasted out-of-line,
DatumGetHeapTupleHeader will perform database accesses to detoast it.
That can invalidate the result of get_cached_rowtype, as documented
(perhaps not plainly enough) in that function's API spec; which leads
to strange errors or crashes when we try to use the TupleDesc to read
the tuple. In short then, trying to update a field of a composite
column could fail intermittently if the overall column value is wide
enough to require toasting.
We can fix the bug at no cost by just changing the order of
operations, since we don't need the TupleDesc until after detoasting.
(Other callers of get_cached_rowtype appear to get this right already,
so there's only one bug.)
Note that the added regression test case reveals this bug reliably
only with debug_discard_caches/CLOBBER_CACHE_ALWAYS.
Per bug #17994 from Alexander Lakhin. Sadly, this patch does not fix
the missing-values issue revealed in the bug discussion; we'll need
some more work to cover that.
Discussion: https://postgr.es/m/17994-5c7100b51b4790e9@postgresql.org
Meson validates 'choice' options for us, so technically this case is
impossible. A better error message helps people reading the code
understand what is going on in that branch.
Author: Tristan Partin <tristan@neon.tech>
Discussion: https://www.postgresql.org/message-id/flat/CSPIJVUDZFKX.3KHMOAVGF94RV%40c3po