This makes it easier to relate the temporary data dirs to each node in
a test script.
Author: Kyotaro Horiguchi
Reviewed-By: Craig Ringer, Alvaro Herrera
PL/Tcl appears to contain logic to convert strings between the database
encoding and UTF8, which is the only encoding modern Tcl will deal with.
However, that code has been disabled since commit 034895125d, which
made it "#if defined(UNICODE_CONVERSION)" and neglected to provide any way
for that symbol to become defined. That might have been all right back
in 2001, but these days we take a dim view of allowing strings with
incorrect encoding into the database.
Remove the conditional compilation, fix warnings about signed/unsigned char
conversions, clean up assorted places that didn't bother with conversions.
(Notably, there were lots of assumptions that database table and field
names didn't need conversion...)
Add a regression test based on plpython_unicode. It's not terribly
thorough, but better than no test at all.
As of commit 2878220682, PL/Tcl will not
compile against pre-8.0 Tcl, whereas it used to work (more or less anyway)
with quite prehistoric versions. As long as we're moving these goalposts,
let's reinstall them at someplace that has some thought behind it. This
commit sets the minimum allowed Tcl version at 8.4, and rips out some bits
of compatibility cruft that are in consequence no longer needed. Reasons
for requiring 8.4 include:
* 8.4 was released in 2002; there seems little reason to believe that
anyone would want to use older versions with Postgres 9.6+.
* We have no buildfarm members testing anything older than 8.4, and
thus no way to know if it's broken.
* We need at least 8.1 to allow enforcement of database encoding
security (8.1 standardized Tcl on using UTF8 internally, before that
it was pretty unpredictable).
* Some versions between 8.1 and 8.4 allowed the backend to become
multithreaded, which is disastrous. We need at least 8.4 to be able
to disable the Tcl notifier subsystem to prevent that.
A small side benefit is that we can make the code more readable by
doing s/CONST84/const/g.
The original implementation of Tcl was all strings, but they improved
performance significantly by introducing typed "objects" (integers,
lists, code, etc). It's past time we made use of that; that happened
in Tcl 8.0 which was released in 1997.
This patch also modernizes some of the error-reporting code, which may
cause small changes in the spelling of complaints about bad calls to
PL/Tcl-provided commands.
Jim Nasby and Karl Lehenbauer, reviewed by Victor Wagner
Commit 7132810c (Retain tempdirs for failed tests) used Test::More's
is_passing method, but that was added in Test::More 0.89_01 which is
sometime later than Perl 5.10.1. Popular platforms such as RHEL6 don't
have that, nevermind some of our older dinosaurs. Do it the hard way.
Michael Paquier, based on research by Craig Ringer
The new bit indicates whether every tuple on the page is already frozen.
It is cleared only when the all-visible bit is cleared, and it can be
set only when we vacuum a page and find that every tuple on that page is
both visible to every transaction and in no need of any future
vacuuming.
A future commit will use this new bit to optimize away full-table scans
that would otherwise be triggered by XID wraparound considerations. A
page which is merely all-visible must still be scanned in that case, but
a page which is all-frozen need not be. This commit does not attempt
that optimization, although that optimization is the goal here. It
seems better to get the basic infrastructure in place first.
Per discussion, it's very desirable for pg_upgrade to automatically
migrate existing VM forks from the old format to the new format. That,
too, will be handled in a follow-on patch.
Masahiko Sawada, reviewed by Kyotaro Horiguchi, Fujii Masao, Amit
Kapila, Simon Riggs, Andres Freund, and others, and substantially
revised by me.
Test composite-type arguments and the argisnull and spi_lastoid Tcl
commmands. This stuff was not covered before, but needs to be exercised
since the upcoming Tcl object-conversion patch changes these code paths
(and broke at least one of them).
These tests verify that 1) WAL replay preserves the stored value,
2) a streaming standby server replays the value obtained from the
master, and 3) the behavior is sensible in the face of repeated
configuration changes.
One annoyance is that tmp_check/ subdir from the TAP tests is clobbered
when the pg_regress test runs in the same subdirectory. This is
bothersome but not too terrible a problem, since the pg_regress test is
not run anyway if the TAP tests fail (unless "make -k" is used).
I had these tests around since commit 69e7235c93e2; add them now that we
have the recovery test framework in place.
Fabien Coelho, reviewed mostly by Michael Paquier and me, but also by
Heikki Linnakangas, BeomYong Lee, Kyotaro Horiguchi, Oleksander
Shulgin, and Álvaro Herrera.
I noticed that the async-notify test results in log messages like these:
LOG: could not send data to client: Broken pipe
FATAL: connection to client lost
This is because it unceremoniously disconnects a client session that is
about to have some NOTIFY messages delivered to it. Such log messages
during a regression test might well cause people to go looking for a
problem that doesn't really exist (it did cause me to waste some time that
way). We can shut it up by adding an UNLISTEN command to session teardown.
Patch HEAD only; this doesn't seem significant enough to back-patch.
This error message was written with only ON SELECT rules in mind, but since
then we also made RETURNING-clause targetlists go through the same logic.
This means that you got a rather off-topic error message if you tried to
add a rule with RETURNING to a table having dropped columns. Ideally we'd
just support that, but some preliminary investigation says that it might be
a significant amount of work. Seeing that Nicklas Avén's complaint is the
first one we've gotten about this in the ten years or so that the code's
been like that, I'm unwilling to put much time into it. Instead, improve
the error report by issuing a different message for RETURNING cases, and
revise the associated comment based on this investigation.
Discussion: 1456176604.17219.9.camel@jordogskog.no
The original coding of the test was relying too much on the ordering in
which backends are awakened once an advisory lock which they wait for is
released. Change the code so that each backend uses its own advisory
lock instead, so that the output becomes stable. Also add a few seconds
of sleep between lock releases, so that the test isn't broken in
overloaded buildfarm animals, as suggested by Tom Lane.
Per buildfarm members spoonbill and guaibasaurus.
Discussion: https://www.postgresql.org/message-id/19294.1456551587%40sss.pgh.pa.us
It's harmless, but might confuse readers. Seems to have been introduced
in 6bc8ef0b7f. Back-patch, just to avoid cosmetic cross-branch
differences.
Amit Langote
In commit 19a541143a I replaced RelOptInfo.width with
RelOptInfo.reltarget.width, but I missed updating debug_print_rel()
for that because it's not compiled by default.
Reported by Salvador Fandino, patch by Michael Paquier.
When converting an RTE with securityQuals into a security barrier
subquery RTE, ensure that the Vars in the new subquery's targetlist
all have varlevelsup = 0 so that they correctly refer to the
underlying base relation being wrapped.
The original code was creating new Vars by copying them from existing
Vars referencing the base relation found elsewhere in the query, but
failed to account for the fact that such Vars could come from sublink
subqueries, and hence have varlevelsup > 0. In practice it looks like
this could only happen with nested security barrier views, where the
outer view has a WHERE clause containing a correlated subquery, due to
the order in which the Vars are processed.
Bug: #13988
Reported-by: Adam Guthrie
Backpatch-to: 9.4, where updatable SB views were introduced
A failure partway through PGLC_localeconv() led to a situation where
the next call would call free_struct_lconv() a second time, leading
to free() on already-freed strings, typically leading to a core dump.
Add a flag to remember whether we need to do that.
Per report from Thom Brown. His example case only provokes the failure
as far back as 9.4, but nonetheless this code is obviously broken, so
back-patch to all supported branches.
In 0e5680f473, I fixed a bug in heapam that caused spurious deadlocks
when multiple updates concurrently attempted to modify the old version
of an updated tuple whose new version was key-share locked. I proposed
an isolationtester spec file that reproduced the bug, but back then
isolationtester wasn't mature enough to be able to run it. Now that
38f8bdcac4 is in the tree, we can have this spec file too.
Discussion: https://www.postgresql.org/message-id/20141212205254.GC1768%40alvh.no-ip.org
I applied the previous-to-last revision of Michaël's submitted patch
instead of the last; these two tweaks pointed out by Craig were left out
of the previous commit by accident.
Some code in the RewindTest test suite is more generally useful than
just for that suite, so put it where other test suites can reach it.
Some postgresql.conf parameters change their default values when a
cluster is initialized with 'allows_streaming' than the previous
behavior; most notably, autovacuum is no longer turned off.
(Also, we no longer call pg_ctl promote with -w, but that flag doesn't
actually do anything in promote so there's no behavior change.)
Author: Michael Paquier
CREATE TABLE .. AS EXECUTE can turn an apparently read-only query into
a write operation, which parallel query can't handle. It's a bit of a
shame that requires us to avoid parallel query for queries prepared via
PREPARE in all cases, but for right now it does.
This is basically a bug fix; the old code assumes that a ForeignScan
is always parallel-safe, but for postgres_fdw, for example, this is
definitely false. It should be true for file_fdw, though, since a
worker can read a file from the filesystem just as well as any other
backend process.
Original patch by Thomas Munro. Documentation, and changes to the
comments, by me.
Also, the dump_info method got split into another method that returns
the stuff as a string instead of just printing it to stdout.
Add a new README in src/test/perl too.
Author: Craig Ringer
Reviewed by: Michaël Paquier
Parallel query can't handle running a query only partially rather than
to completion. However, there seems to be no way to run a statement
prepared via SQL PREPARE other than to completion, so we can enable it
there without a problem.
The situation is more complicated for the extend query protocol.
libpq seems to provide no way to send an Execute message with a
non-zero rowcount, but some other client might. If that happens, and
a parallel plan was chosen, we'll execute the parallel plan without
using any workers, which may be somewhat inefficient but should still
work. Hopefully this won't be a problem; users can always set
max_parallel_degree=0 to avoid choosing parallel plans in the first
place.
Amit Kapila, reviewed by me.
This patch introduces "pg_blocking_pids(int) returns int[]", which returns
the PIDs of any sessions that are blocking the session with the given PID.
Historically people have obtained such information using a self-join on
the pg_locks view, but it's unreasonably tedious to do it that way with any
modicum of correctness, and the addition of parallel queries has pretty
much broken that approach altogether. (Given some more columns in the view
than there are today, you could imagine handling parallel-query cases with
a 4-way join; but ugh.)
The new function has the following behaviors that are painful or impossible
to get right via pg_locks:
1. Correctly understands which lock modes block which other ones.
2. In soft-block situations (two processes both waiting for conflicting lock
modes), only the one that's in front in the wait queue is reported to
block the other.
3. In parallel-query cases, reports all sessions blocking any member of
the given PID's lock group, and reports a session by naming its leader
process's PID, which will be the pg_backend_pid() value visible to
clients.
The motivation for doing this right now is mostly to fix the isolation
tests. Commit 38f8bdcac4 lobotomized
isolationtester's is-it-waiting query by removing its ability to recognize
nonconflicting lock modes, as a crude workaround for the inability to
handle soft-block situations properly. But even without the lock mode
tests, the old query was excessively slow, particularly in
CLOBBER_CACHE_ALWAYS builds; some of our buildfarm animals fail the new
deadlock-hard test because the deadlock timeout elapses before they can
probe the waiting status of all eight sessions. Replacing the pg_locks
self-join with use of pg_blocking_pids() is not only much more correct, but
a lot faster: I measure it at about 9X faster in a typical dev build with
Asserts, and 3X faster in CLOBBER_CACHE_ALWAYS builds. That should provide
enough headroom for the slower CLOBBER_CACHE_ALWAYS animals to pass the
test, without having to lengthen deadlock_timeout yet more and thus slow
down the test for everyone else.
We don't really need this field, because it's either zero or redundant with
PGPROC.pid. The use of zero to mark "not a group leader" is not necessary
since we can just as well test whether lockGroupLeader is NULL. This does
not save very much, either as to code or data, but the simplification seems
worthwhile anyway.
In 4b4b680c3 I accidentally used sizeof(PrivateRefCountArray) instead of
sizeof(PrivateRefCountEntry) when creating the refcount overflow
hashtable. As the former is bigger than the latter, this luckily only
resulted in a slightly increased memory usage when many buffers are
pinned in a backend.
Reported-By: Takashi Horikawa
Discussion: 73FA3881462C614096F815F75628AFCD035A48C3@BPXM01GP.gisp.nec.co.jp
Backpatch: 9.5, where thew new ref count infrastructure was introduced
The "Session Information Functions" table seems to be sorted mostly
alphabetically (although it's not perfect), which would be all right
if it didn't lead to some related functions being described in a
pretty nonintuitive order. Also, the prose discussions after the table
were in an order that hardly matched the table at all. Rearrange to
make things a bit easier to follow.
Coverity griped about use of unchecked strcpy() into a local variable.
There's unlikely to be any actual bug there, since no caller would be
passing a path longer than MAXPGPATH, but nonetheless use of strlcpy()
seems preferable.
While at it, get rid of unmaintainable separation between list of
field names and list of field values in favor of initializing them
in parallel. And we might as well declare get_configdata()'s path
argument as const char *, even though no current caller needs that.
Some over-eager copy-and-pasting on my part resulted in a nonsense
result being returned in this case. I have adopted the same pattern for
handling this case as is used in the one argument form of the function,
i.e. we just skip over the code that adds values to the object.
Diagnosis and patch from Michael Paquier, although not quite his
solution.
Fixes bug #13936.
Backpatch to 9.5 where jsonb_object was introduced.
Reflow text in lock manager README so that it fits within 80 columns.
Correct some mistakes. Expand the README to explain not only why group
locking exists but also the data structures that support it. Improve
comments related to group locking several files. Change the name of a
macro argument for improved clarity.
Most of these problems were reported by Tom Lane, but I found a few
of them myself.
Robert Haas and Tom Lane
list_concat(list_concat(a, b), c) destructively changes both a and b;
to avoid such perils, copy lists of remote_conds before incorporating
them into larger lists via list_concat().
Ashutosh Bapat, per a report from Etsuro Fujita
Alvaro Herrera
Tom Lane
Robert Haas
Peter Eisentraut
Dean Rasheed
Andrew Dunstan
Noah Misch
Andres Freund
Tatsuo Ishii