Most GUC check hooks that inspect database state have special checks
that prevent them from throwing hard errors for state-dependent issues
when source == PGC_S_TEST. This allows, for example,
"ALTER DATABASE d SET default_text_search_config = foo" when the "foo"
configuration hasn't been created yet. Without this, we have problems
during dump/reload or pg_upgrade, because pg_dump has no idea about
possible dependencies of GUC values and can't ensure a safe restore
ordering.
However, check_role() and check_session_authorization() hadn't gotten
the memo about that, and would throw hard errors anyway. It's not
entirely clear what is the use-case for "ALTER ROLE x SET role = y",
but we've now heard two independent complaints about that bollixing
an upgrade, so apparently some people are doing it.
Hence, fix these two functions to act more like other check hooks
with similar needs. (But I did not change their insistence on
being inside a transaction, as it's still not apparent that setting
either GUC from the configuration file would be wise.)
Also fix check_temp_buffers, which had a different form of the disease
of making state-dependent checks without any exception for PGC_S_TEST.
A cursory survey of other GUC check hooks did not find any more issues
of this ilk. (There are a lot of interdependencies among
PGC_POSTMASTER and PGC_SIGHUP GUCs, which may be a bad idea, but
they're not relevant to the immediate concern because they can't be
set via ALTER ROLE/DATABASE.)
Per reports from Charlie Hornsby and Nathan Bossart. Back-patch
to all supported branches.
Discussion: https://postgr.es/m/HE1P189MB0523B31598B0C772C908088DB7709@HE1P189MB0523.EURP189.PROD.OUTLOOK.COM
Discussion: https://postgr.es/m/20160711223641.1426.86096@wrigleys.postgresql.org
Previously, get_cached_rowtype() cached a pointer to a reference-counted
tuple descriptor from the typcache, relying on the ExprContextCallback
mechanism to release the tupdesc refcount when the expression tree
using the tupdesc was destroyed. This worked fine when it was designed,
but the introduction of within-DO-block COMMITs broke it. The refcount
is logged in a transaction-lifespan resource owner, but plpgsql won't
destroy simple expressions made within the DO block (before its first
commit) until the DO block is exited. That results in a warning about
a leaked tupdesc refcount when the COMMIT destroys the original resource
owner, and then an error about the active resource owner not holding a
matching refcount when the expression is destroyed.
To fix, get rid of the need to have a shutdown callback at all, by
instead caching a pointer to the relevant typcache entry. Those
survive for the life of the backend, so we needn't worry about the
pointer becoming stale. (For registered RECORD types, we can still
cache a pointer to the tupdesc, knowing that it won't change for the
life of the backend.) This mechanism has been in use in plpgsql
and expandedrecord.c since commit 4b93f5799, and seems to work well.
This change requires modifying the ExprEvalStep structs used by the
relevant expression step types, which is slightly worrisome for
back-patching. However, there seems no good reason for extensions
to be familiar with the details of these particular sub-structs.
Per report from Rohit Bhogate. Back-patch to v11 where within-DO-block
COMMITs became a thing.
Discussion: https://postgr.es/m/CAAV6ZkQRCVBh8qAY+SZiHnz+U+FqAGBBDaDTjF2yiKa2nJSLKg@mail.gmail.com
heap_update needs to clear any existing "all visible" flag on
the old tuple's page (and on the new page too, if different).
Per coding rules, to do this it must acquire pin on the appropriate
visibility-map page while not holding exclusive buffer lock;
which creates a race condition since someone else could set the
flag whenever we're not holding the buffer lock. The code is
supposed to handle that by re-checking the flag after acquiring
buffer lock and retrying if it became set. However, one code
path through heap_update itself, as well as one in its subroutine
RelationGetBufferForTuple, failed to do this. The end result,
in the unlikely event that a concurrent VACUUM did set the flag
while we're transiently not holding lock, is a non-recurring
"PANIC: wrong buffer passed to visibilitymap_clear" failure.
This has been seen a few times in the buildfarm since recent VACUUM
changes that added code paths that could set the all-visible flag
while holding only exclusive buffer lock. Previously, the flag
was (usually?) set only after doing LockBufferForCleanup, which
would insist on buffer pin count zero, thus preventing the flag
from becoming set partway through heap_update. However, it's
clear that it's heap_update not VACUUM that's at fault here.
What's less clear is whether there is any hazard from these bugs
in released branches. heap_update is certainly violating API
expectations, but if there is no code path that can set all-visible
without a cleanup lock then it's only a latent bug. That's not
100% certain though, besides which we should worry about extensions
or future back-patch fixes that could introduce such code paths.
I chose to back-patch to v12. Fixing RelationGetBufferForTuple
before that would require also back-patching portions of older
fixes (notably 0d1fe9f74), which is more code churn than seems
prudent to fix a hypothetical issue.
Discussion: https://postgr.es/m/2247102.1618008027@sss.pgh.pa.us
With the Oracle Developer Studio 12.6 compiler, #line directives alter
the current source file location for purposes of #include "..."
directives. Hence, a VPATH build failed with 'cannot find include file:
"specscanner.c"'. With two exceptions, parser-containing directories
already add "-I. -I$(srcdir)"; eliminate the exceptions. Back-patch to
9.6 (all supported versions).
Commit 6f38d4dac3 failed to heed a warning about the stability of the
value pointed to by "otid". The caller is allowed to pass in a pointer to
newtup->t_self, which will be updated during the execution of the
function. Instead, the SSI check should use the value we copy into
oldtup.t_self near the top of the function.
Not a live bug, because newtup->t_self doesn't really get updated until
a bit later, but it was confusing and broke the rule established by the
comment.
Back-patch to 13.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2689164.1618160085%40sss.pgh.pa.us
There are hacks in parse_coerce.c to push down a requested coercion
to below any CollateExpr that may appear. However, we did that even
if the requested data type is non-collatable, leading to an invalid
expression tree in which CollateExpr is applied to a non-collatable
type. The fix is just to drop the CollateExpr altogether, reasoning
that it's useless.
This bug is ten years old, dating to the original addition of
COLLATE support. The lack of field complaints suggests that there
aren't a lot of user-visible consequences. We noticed the problem
because it would trigger an assertion in DefineVirtualRelation if
the invalid structure appears as an output column of a view; however,
in a non-assert build, you don't see a crash just a (subtly incorrect)
complaint about applying collation to a non-collatable type. I found
that by putting the incorrect structure further down in a view, I could
make a view definition that would fail dump/reload, per the added
regression test case. But CollateExpr doesn't do anything at run-time,
so this likely doesn't lead to any really exciting consequences.
Per report from Yulin Pei. Back-patch to all supported branches.
Discussion: https://postgr.es/m/HK0PR01MB22744393C474D503E16C8509F4709@HK0PR01MB2274.apcprd01.prod.exchangelabs.com
Commit 8ff1c94649 extended TRUNCATE command so that it can also truncate
foreign tables. But it forgot to support tab-complete for TRUNCATE on
foreign tables. That is, previously tab-complete for TRUNCATE displayed
only the names of regular tables.
This commit improves tab-complete for TRUNCATE so that it displays also
the names of foreign tables.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
This GUC has already been classified as LOGGING_WHAT, but its location
in postgresql.conf.sample and the documentation did not reflect that, so
fix those inconsistencies.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210404012546.GK6592@telsasoft.com
Updated documentation for new messages added for streaming of in-progress
transactions, as well as changes made to the existing messages. It also
updates the information of protocol versions supported for logical
replication.
Author: Ajin Cherian
Reviewed-by: Amit Kapila, Peter Smith, Euler Taveira
Discussion: https://postgr.es/m/CAFPTHDYHN9m=MZZct-B=BYg_TETvv+kXvL9RD2DpaBS5pGxGYg@mail.gmail.com
Using Roman numbers (via "RM" or "rm") for a conversion to calculate a
number of months has never considered the case of negative numbers,
where a conversion could easily cause out-of-bound memory accesses. The
conversions in themselves were not completely consistent either, as
specifying 12 would result in NULL, but it should mean XII.
This commit reworks the conversion calculation to have a more
consistent behavior:
- If the number of months and years is 0, return NULL.
- If the number of months is positive, return the exact month number.
- If the number of months is negative, do a backward calculation, with
-1 meaning December, -2 November, etc.
Reported-by: Theodor Arsenij Larionov-Trichkin
Author: Julien Rouhaud
Discussion: https://postgr.es/m/16953-f255a18f8c51f1d5@postgresql.org
backpatch-through: 9.6
Coverity complained about possible overflow in expressions like
intresult = tm->tm_sec * 1000000 + fsec;
on the grounds that the multiplication would happen in 32-bit
arithmetic before widening to the int64 result. I think these
are all false positives because of the limited possible range of
tm_sec; but nonetheless it seems silly to spell it like that when
nearby lines have the identical computation written with a 64-bit
constant.
... or more accurately, with an LL constant, which is not project
style. Make all of these use INT64CONST(), as we do elsewhere.
This is all new code from a2da77cdb, so no need for back-patch.
We'd previously noted the need for coping with Windows headers
that provide some other definition of macro "ERROR" than elog.h
does. It turns out that R also wants to define ERROR, and
WARNING too. PL/R has been working around this in a hacky way
that broke when we recently changed the numeric value of ERROR.
To let them have a more future-proof solution, provide an
alternate macro PGWARNING for WARNING, and make PGERROR visible
always, not only when #ifdef WIN32.
Discussion: https://postgr.es/m/CADK3HHK6iMChd1yoOqssxBn5Z14Zar8Ztr3G-N_fuG7F8YTP3w@mail.gmail.com
The path for *exprs != NIL would misbehave, and likely crash,
since pull_varattnos expects its last argument to be valid
at call.
Found by Coverity --- we have no coverage of this path in
the regression tests.
ExecuteTruncate() filters out the duplicate tables specified
in the TRUNCATE command, for example in the case where "TRUNCATE foo, foo"
is executed. Such duplicate tables obviously don't need to be opened
and closed because they are skipped. But previously it always opened
the tables before checking whether they were duplicated ones or not,
and then closed them if they were. That is, the duplicated tables were
opened and closed unnecessarily.
This commit changes ExecuteTruncate() so that it opens the table
after it confirms that table is not duplicated one, which leads to
avoid unnecessary table open/close.
Do not back-patch because such unnecessary table open/close is not
a bug though it exists in older versions.
Author: Bharath Rupireddy
Reviewed-by: Amul Sul, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACUdBO_sXJTa08OZ0YT0qk7F_gAmRa9hT4dxRcgPS4nsZA@mail.gmail.com
Commit 438fc4a39c prevented the WAL replay from writing
COMMIT_TS_SETTS record. By this change there is no code that
generates COMMIT_TS_SETTS record in PostgreSQL core.
Also we can think that there are no extensions using the record
because we've not received so far any complaints about the issue
that commit 438fc4a39c fixed. Therefore this commit removes
COMMIT_TS_SETTS record and its related code. Even without
this record, the timestamp required for commit timestamp feature
can be acquired from the COMMIT record.
Bump WAL page magic.
Reported-by: lx zou <zoulx1982@163.com>
Author: Fujii Masao
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/16931-620d0f2fdc6108f1@postgresql.org
Commit c9c41c7a33 used two different
naming patterns. Standardize on the majority pattern, which was the
only pattern in the last reviewed version of that commit.
There were some comments in nodeFuncs.c that, depending on your
interpretation of the word "result", could lead you to believe that the
comments were badly copied and pasted from somewhere else. If you thought
of "result" as the return value of the function that the comment is
written in, then you'd be misled. However, if you'd correctly
interpreted "result" to mean the result type of the given node type,
you'd not have seen any issues.
Here we do a small cleanup to try to prevent any future
misinterpretations. Per wording suggestion from Tom Lane.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvp+Bw=2Qiu5=uXMKfC7gd0+B=4JvexVgGJU=am2g9a1CA@mail.gmail.com
Whitespace between tags is significant, and in some cases it creates
extra vertical space in man pages. The fix is to remove some newlines
in the markup.
A (relatively minor) annoyance of ErrorResponse/NoticeResponse messages
as printed by PQtrace() is that their length might vary when we move
error messages from one source file to another, one function to another,
or even when their location line numbers change number of digits.
To avoid having to adjust expected files for some tests, make the
regress mode of PQtrace() suppress the length word of NoticeResponse and
ErrorResponse messages.
Discussion: https://postgr.es/m/20210402023010.GA13563@alvherre.pgsql
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
When commit 0827e8af70 added auto-analyze support for partitioned
tables, it included code to obtain reltuples for the partitioned table
as a number of catalog accesses to read pg_class.reltuples for each
partition. That's not only very inefficient, but also problematic
because autovacuum doesn't hold any locks on any of those tables -- and
doesn't want to. Replace that code with a read of pg_class.reltuples
for the partitioned table, and make sure ANALYZE and TRUNCATE properly
maintain that value.
I found no code that would be affected by the change of relpages from
zero to non-zero for partitioned tables, and no other code that should
be maintaining it, but if there is, hopefully it'll be an easy fix.
Per buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/1823909.1617862590@sss.pgh.pa.us
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
Several buildfarm critters that don't usually produce such
warnings are complaining about e717a9a18. I think it's
actually safe, but move initialization to silence the warning.
Ignore parallel workers in pg_stat_statements
Oversight in 4f0b0966c8 which exposed queryid in parallel workers.
Counters are aggregated by the main backend process so parallel workers
would report duplicated activity, and could also report activity for the
wrong entry as they are only aware of the top level queryid.
Fix thinko in pg_stat_get_activity when retrieving the queryid.
Remove unnecessary call to pgstat_report_queryid().
Reported-by: Amit Kapila, Andres Freund, Thomas Munro
Discussion: https://postgr.es/m/20210408051735.lfbdzun5zdlax5gd@alap3.anarazel.dep634GTSOqnDW86Owrn6qDAVosC5dJjXjp7BMfc5Gz1Q@mail.gmail.com
Author: Julien Rouhaud
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
ScalarArrayOpExprs with "useOr=true" and a set of Consts on the righthand
side have traditionally been evaluated by using a linear search over the
array. When these arrays contain large numbers of elements then this
linear search could become a significant part of execution time.
Here we add a new method of evaluating ScalarArrayOpExpr expressions to
allow them to be evaluated by first building a hash table containing each
element, then on subsequent evaluations, we just probe that hash table to
determine if there is a match.
The planner is in charge of determining when this optimization is possible
and it enables it by setting hashfuncid in the ScalarArrayOpExpr. The
executor will only perform the hash table evaluation when the hashfuncid
is set.
This means that not all cases are optimized. For example CHECK constraints
containing an IN clause won't go through the planner, so won't get the
hashfuncid set. We could maybe do something about that at some later
date. The reason we're not doing it now is from fear that we may slow
down cases where the expression is evaluated only once. Those cases can
be common, for example, a single row INSERT to a table with a CHECK
constraint containing an IN clause.
In the planner, we enable this when there are suitable hash functions for
the ScalarArrayOpExpr's operator and only when there is at least
MIN_ARRAY_SIZE_FOR_HASHED_SAOP elements in the array. The threshold is
currently set to 9.
Author: James Coleman, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Heikki Linnakangas
Discussion: https://postgr.es/m/CAAaqYe8x62+=wn0zvNKCj55tPpg-JBHzhZFFc6ANovdqFw7-dA@mail.gmail.com
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Teach xlogreader.c to decode its output into a circular buffer, to
support optimizations based on looking ahead.
* XLogReadRecord() works as before, consuming records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros.
* An alternative new interface XLogNextRecord() is added that returns
pointers to DecodedXLogRecord structs that can be examined directly.
* XLogReadAhead() provides a second cursor that lets you see
further ahead, as long as data is available and there is enough space
in the decoding buffer. This returns DecodedXLogRecord pointers to the
caller, but also adds them to a queue of records that will later be
consumed by XLogNextRecord()/XLogReadRecord().
The buffer's size is controlled with wal_decode_buffer_size. The buffer
could potentially be placed into shared memory, for future projects.
Large records that don't fit in the circular buffer are called
"oversized" and allocated separately with palloc().
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
There was some code in gen_prune_steps_from_opexps that needlessly
checked a list was not empty when it clearly had to contain at least one
item. This prompted a further cleanup operation in partprune.c.
Additionally, the previous code could end up adding additional needless
INTERSECT steps. However, those do not appear to be able to cause any
misbehavior.
gen_prune_steps_from_opexps is now no longer in charge of generating
combine pruning steps. Instead, gen_partprune_steps_internal, which
already does some combine step creation has been given the sole
responsibility of generating all combine steps. This means that when
we recursively call gen_partprune_steps_internal, since it always now adds
a combine step when it produces multiple steps, we can just pay attention
to the final step returned.
In passing, do quite a bit of work on the comments to try to more clearly
explain the role of both gen_partprune_steps_internal and
gen_prune_steps_from_opexps. This is fairly complex code so some extra
effort to give any new readers an overview of how things work seems like
a good idea.
Author: Amit Langote
Reported-by: Andy Fan
Reviewed-by: Kyotaro Horiguchi, Andy Fan, Ryan Lambert, David Rowley
Discussion: https://postgr.es/m/CAKU4AWqWoVii+bRTeBQmeVW+PznkdO8DfbwqNsu9Gj4ubt9A6w@mail.gmail.com
This adds a function, pg_wait_for_backend_termination(), and a new
timeout argument to pg_terminate_backend(), which will wait for the
backend to actually terminate (with or without signaling it to do so
depending on which function is called). The default behaviour of
pg_terminate_backend() remains being timeout=0 which does not waiting.
For pg_wait_for_backend_termination() the default wait is 5 seconds.
Author: Bharath Rupireddy
Reviewed-By: Fujii Masao, David Johnston, Muhammad Usama,
Hou Zhijie, Magnus Hagander
Discussion: https://postgr.es/m/CALj2ACUBpunmyhYZw-kXCYs5NM+h6oG_7Df_Tn4mLmmUQifkqA@mail.gmail.com
Tom Lane
Fujii Masao
Noah Misch
Thomas Munro
Michael Paquier
Peter Eisentraut
Amit Kapila
David Rowley
Alvaro Herrera
Magnus Hagander
Peter Geoghegan
Bruce Momjian