This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
When more than one setting entries of same parameter exist in the
configuration file, PostgreSQL uses only entry appearing last in
configuration file scan. Since the other entries are not used,
ParseConfigFp() doesn't need to process them, but previously it did
that. This problematic behavior caused the configuration file scan
to detect invalid settings of unused entries (e.g., existence of
multiple entries of PGC_POSTMASTER parameter) and log the messages
complaining about them.
This commit changes the configuration file scan so that it processes
only last entry of each parameter.
Note that when multiple entries of same parameter exist both in
postgresql.conf and postgresql.auto.conf, unused entries in
postgresql.conf are still processed only at postmaster startup.
The problem has existed since old version, but a user is more likely
to encounter it since 9.4 where ALTER SYSTEM command was introduced.
So back-patch to 9.4.
Amit Kapila, slightly modified by me. Per report from Christoph Berg.
pg_ctl will log to the Windows event log when it is running as a service,
which is the primary way of running PostgreSQL on Windows. This option
makes it possible to specify which event source to use for this, in order
to separate different instances. The server logging itself is still controlled
by the regular logging parameters, including a separate setting for the event
source. The parameter to pg_ctl only controlls the logging from pg_ctl itself.
MauMau, review in many iterations by Amit Kapila and me.
When running several postgres clusters on one OS instance it's often
inconveniently hard to identify which "postgres" process belongs to
which postgres instance.
Add the cluster_name GUC, whose value will be included as part of the
process titles if set. With that processes can more easily identified
using tools like 'ps'.
To avoid problems with encoding mismatches between postgresql.conf,
consoles, and individual databases replace non-ASCII chars in the name
with question marks. The length is limited to NAMEDATALEN to make it
less likely to truncate important information at the end of the
status.
Thomas Munro, with some adjustments by me and review by a host of people.
Support for running postgres on Alpha hasn't been tested for a long
while. Due to Alpha's uniquely lax cache coherency model it's a hard
to develop for platform (especially blindly!) and thought to be
unlikely to currently work correctly.
As Alpha is the only supported architecture for Tru64 drop support for
it as well. Tru64's support has ended 2012 and it has been in
maintenance-only mode for much longer.
Also remove stray references to __ksr__ and ultrix defines.
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
data_directory could be set both in postgresql.conf and postgresql.auto.conf so far.
This could cause some problematic situations like circular definition. To avoid such
situations, this commit forbids a user to set data_directory in postgresql.auto.conf.
Backpatch this to 9.4 where ALTER SYSTEM command was introduced.
Amit Kapila, reviewed by Abhijit Menon-Sen, with minor adjustments by me.
The original coding for ALTER SYSTEM made a fundamentally bogus assumption
that postgresql.auto.conf could be sought relative to the main config file
if we hadn't yet determined the value of data_directory. This fails for
common arrangements with the config file elsewhere, as reported by
Christoph Berg.
The simplest fix is to not try to read postgresql.auto.conf until after
SelectConfigFiles has chosen (and locked down) the data_directory setting.
Because of the logic in ProcessConfigFile for handling resetting of GUCs
that've been removed from the config file, we cannot easily read the main
and auto config files separately; so this patch adopts a brute force
approach of reading the main config file twice during postmaster startup.
That's a tad ugly, but the actual time cost is likely to be negligible,
and there's no time for a more invasive redesign before beta.
With this patch, any attempt to set data_directory via ALTER SYSTEM
will be silently ignored. It would probably be better to throw an
error, but that can be dealt with later. This bug, however, would
prevent any testing of ALTER SYSTEM by a significant fraction of the
userbase, so it seems important to get it fixed before beta.
Per discussion, the old value of 128MB is ridiculously small on modern
machines; in fact, it's not even any larger than the default value of
shared_buffers, which it certainly should be. Increase to 4GB, which
is unlikely to be any worse than the old default for anyone, and should
be noticeably better for most. Eventually we might have an autotuning
scheme for this setting, but the recent attempt crashed and burned,
so for now just do this.
This reverts commit ee1e5662d8, as well as
a remarkably large number of followup commits, which were mostly concerned
with the fact that the implementation didn't work terribly well. It still
doesn't: we probably need some rather basic work in the GUC infrastructure
if we want to fully support GUCs whose default varies depending on the
value of another GUC. Meanwhile, it also emerged that there wasn't really
consensus in favor of the definition the patch tried to implement (ie,
effective_cache_size should default to 4 times shared_buffers). So whack
it all back to where it was. In a followup commit, I'll do what was
recently agreed to, which is to simply change the default to a higher
value.
EXEC_BACKEND builds (i.e., Windows) failed to absorb values of PGC_BACKEND
parameters if they'd been changed post-startup via the config file. This
for example prevented log_connections from working if it were turned on
post-startup. The mechanism for handling this case has always been a bit
of a kluge, and it wasn't revisited when we implemented EXEC_BACKEND.
While in a normal forking environment new backends will inherit the
postmaster's value of such settings, EXEC_BACKEND backends have to read
the settings from the CONFIG_EXEC_PARAMS file, and they were mistakenly
rejecting them. So this case has always been broken in the Windows port;
so back-patch to all supported branches.
Amit Kapila
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Reviewed by Andres Freund.
The previous method was overly complex and underly correct; in particular,
by assigning the default value with PGC_S_OVERRIDE, it prevented later
attempts to change the setting in postgresql.conf, as noted by Jeff Janes.
We should just assign the default value with source PGC_S_DYNAMIC_DEFAULT,
which will have the desired priority relative to the boot_val as well as
user-set values.
There is still a gap in this method: if there's an explicit assignment of
effective_cache_size = -1 in the postgresql.conf file, and that assignment
appears before shared_buffers is assigned, the code will substitute 4 times
the bootstrap default for shared_buffers, and that value will then persist
(since it will have source PGC_S_FILE). I don't see any very nice way
to avoid that though, and it's not a case to be expected in practice.
The existing comments in guc-file.l look forward to a redesign of the
DYNAMIC_DEFAULT mechanism; if that ever happens, we should consider this
case as one of the things we'd like to improve.
krb_srvname is actually not available anymore as a parameter server-side, since
with gssapi we accept all principals in our keytab. It's still used in libpq for
client side specification.
In passing remove declaration of krb_server_hostname, where all the functionality
was already removed.
Noted by Stephen Frost, though a different solution than his suggestion
- Write HIGH:MEDIUM instead of DEFAULT:!LOW:!EXP for clarity.
- Order 3DES last to work around inappropriate OpenSSL default.
- Remove !MD5 and @STRENGTH, because they are irrelevant.
- Add clarifying documentation.
Effectively, the new default is almost the same as the old one, but it
is arguably easier to understand and modify.
Author: Marko Kreen <markokr@gmail.com>
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
The temporary statistics files don't need to be included in the backup
because they are always reset at the beginning of the archive recovery.
This patch changes pg_basebackup so that it skips all files located in
$PGDATA/pg_stat_tmp or the directory specified by stats_temp_directory
parameter.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
This patch adds an option, huge_tlb_pages, which allows requesting the
shared memory segment to be allocated using huge pages, by using the
MAP_HUGETLB flag in mmap(). This can improve performance.
The default is 'try', which means that we will attempt using huge pages,
and fall back to non-huge pages if it doesn't work. Currently, only Linux
has MAP_HUGETLB. On other platforms, the default 'try' behaves the same as
'off'.
In the passing, don't try to round the mmap() size to a multiple of
pagesize. mmap() doesn't require that, and there's no particular reason for
PostgreSQL to do that either. When using MAP_HUGETLB, however, round the
request size up to nearest 2MB boundary. This is to work around a bug in
some Linux kernel versions, but also to avoid wasting memory, because the
kernel will round the size up anyway.
Many people were involved in writing this patch, including Christian Kruse,
Richard Poole, Abhijit Menon-Sen, reviewed by Peter Geoghegan, Andres Freund
and me.
Fix integer overflow issue noted by Magnus Hagander, as well as a bunch
of other infelicities in commit ee1e5662d8
and its unreasonably large number of followups.
Commit a5bca4ef03 accidentally changed
the semantics when the "skipping missing configuration file" is
emitted, because it forced OK to true instead of leaving the value
untouched.
Spotted by Tom Lane.
Commit 138184adc5 plugged some but not
all of the leaks from commit 2a0c81a12c.
This tightens things up some more.
Amit Kapila, per an observation by Tom Lane
Move FreeConfigVariables() later to make sure ErrorConfFile is valid
when we use it, and get rid of an unnecessary string copy operation.
Amit Kapila, kibitzed by me.
Serious oversight in commit 16e1b7a1b7:
we should not allow an interrupt to take control away from mainline code
except when ImmediateInterruptOK is set. Just to be safe, let's adopt
the same save-clear-restore dance that's been used for many years in
HandleCatchupInterrupt and HandleNotifyInterrupt, so that nothing bad
happens if a timeout handler invokes code that tests or even manipulates
ImmediateInterruptOK.
Per report of "stuck spinlock" failures from Christophe Pettus, though
many other symptoms are possible. Diagnosis by Andres Freund.
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
This sets up ECDH key exchange, when compiling against OpenSSL that
supports EC. Then the ECDHE-RSA and ECDHE-ECDSA cipher suites can be
used for SSL connections. The latter one means that EC keys are now
usable.
The reason for EC key exchange is that it's faster than DHE and it
allows to go to higher security levels where RSA will be horribly slow.
There is also new GUC option ssl_ecdh_curve that specifies the curve
name used for ECDH. It defaults to "prime256v1", which is the most
common curve in use in HTTPS.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
By default, OpenSSL (and SSL/TLS in general) lets the client cipher
order take priority. This is OK for browsers where the ciphers were
tuned, but few PostgreSQL client libraries make the cipher order
configurable. So it makes sense to have the cipher order in
postgresql.conf take priority over client defaults.
This patch adds the setting "ssl_prefer_server_ciphers" that can be
turned on so that server cipher order is preferred. Per discussion,
this now defaults to on.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
Prevent handle_sig_alarm from losing control partway through due to a query
cancel (either an asynchronous SIGINT, or a cancel triggered by one of the
timeout handler functions). That would at least result in failure to
schedule any required future interrupt, and might result in actual
corruption of timeout.c's data structures, if the interrupt happened while
we were updating those.
We could still lose control if an asynchronous SIGINT arrives just as the
function is entered. This wouldn't break any data structures, but it would
have the same effect as if the SIGALRM interrupt had been silently lost:
we'd not fire any currently-due handlers, nor schedule any new interrupt.
To forestall that scenario, forcibly reschedule any pending timer interrupt
during AbortTransaction and AbortSubTransaction. We can avoid any extra
kernel call in most cases by not doing that until we've allowed
LockErrorCleanup to kill the DEADLOCK_TIMEOUT and LOCK_TIMEOUT events.
Another hazard is that some platforms (at least Linux and *BSD) block a
signal before calling its handler and then unblock it on return. When we
longjmp out of the handler, the unblock doesn't happen, and the signal is
left blocked indefinitely. Again, we can fix that by forcibly unblocking
signals during AbortTransaction and AbortSubTransaction.
These latter two problems do not manifest when the longjmp reaches
postgres.c, because the error recovery code there kills all pending timeout
events anyway, and it uses sigsetjmp(..., 1) so that the appropriate signal
mask is restored. So errors thrown outside any transaction should be OK
already, and cleaning up in AbortTransaction and AbortSubTransaction should
be enough to fix these issues. (We're assuming that any code that catches
a query cancel error and doesn't re-throw it will do at least a
subtransaction abort to clean up; but that was pretty much required already
by other subsystems.)
Lastly, ProcSleep should not clear the LOCK_TIMEOUT indicator flag when
disabling that event: if a lock timeout interrupt happened after the lock
was granted, the ensuing query cancel is still going to happen at the next
CHECK_FOR_INTERRUPTS, and we want to report it as a lock timeout not a user
cancel.
Per reports from Dan Wood.
Back-patch to 9.3 where the new timeout handling infrastructure was
introduced. We may at some point decide to back-patch the signal
unblocking changes further, but I'll desist from that until we hear
actual field complaints about it.
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
The absolute path to config file was not pfreed. There are probably more
small leaks here and there in the config file reload code and assign hooks,
and in practice no-one reloads the config files frequently enough for it to
be a problem, but this one is trivial enough that might as well fix it.
Backpatch to 9.3 where the leak was introduced.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
The existing renegotiation code was home for several bugs: it might
erroneously report that renegotiation had failed; it might try to
execute another renegotiation while the previous one was pending; it
failed to terminate the connection if the renegotiation never actually
took place; if a renegotiation was started, the byte count was reset,
even if the renegotiation wasn't completed (this isn't good from a
security perspective because it means continuing to use a session that
should be considered compromised due to volume of data transferred.)
The new code is structured to avoid these pitfalls: renegotiation is
started a little earlier than the limit has expired; the handshake
sequence is retried until it has actually returned successfully, and no
more than that, but if it fails too many times, the connection is
closed. The byte count is reset only when the renegotiation has
succeeded, and if the renegotiation byte count limit expires, the
connection is terminated.
This commit only touches the master branch, because some of the changes
are controversial. If everything goes well, a back-patch might be
considered.
Per discussion started by message
20130710212017.GB4941@eldon.alvh.no-ip.org
We've seen multiple cases of people looking at the postmaster's original
stderr output to try to diagnose problems, not realizing/remembering that
their logging configuration is set up to send log messages somewhere else.
This seems particularly likely to happen in prepackaged distributions,
since many packagers patch the code to change the factory-standard logging
configuration to something more in line with their platform conventions.
In hopes of reducing confusion, emit a LOG message about this at the point
in startup where we are about to switch log output away from the original
stderr, providing a pointer to where to look instead. This message will
appear as the last thing in the original stderr output. (We might later
also try to emit such link messages when logging parameters are changed
on-the-fly; but that case seems to be both noticeably harder to do nicely,
and much less frequently a problem in practice.)
Per discussion, back-patch to 9.3 but not further.
This is like shared_preload_libraries except that it takes effect at
backend start and can be changed without a full postmaster restart. It
is like local_preload_libraries except that it is still only settable by
a superuser. This can be a better way to load modules such as
auto_explain.
Since there are now three preload parameters, regroup the documentation
a bit. Put all parameters into one section, explain common
functionality only once, update the descriptions to reflect current and
future realities.
Reviewed-by: Dimitri Fontaine <dimitri@2ndQuadrant.fr>
This patch replaces WALInsertLock with a number of WAL insertion slots,
allowing multiple backends to insert WAL records to the WAL buffers
concurrently. This is particularly useful for parallel loading large amounts
of data on a system with many CPUs.
This has one user-visible change: switching to a new WAL segment with
pg_switch_xlog() now fills the remaining unused portion of the segment with
zeros. This potentially adds some overhead, but it has been a very common
practice by DBA's to clear the "tail" of the segment with an external
pg_clearxlogtail utility anyway, to make the WAL files compress better.
With this patch, it's no longer necessary to do that.
This patch adds a new GUC, xloginsert_slots, to tune the number of WAL
insertion slots. Performance testing suggests that the default, 8, works
pretty well for all kinds of worklods, but I left the GUC in place to allow
others with different hardware to test that easily. We might want to remove
that before release.
Reviewed by Andres Freund.
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
Prior to 9.3 the commit_delay affected only the current user,
whereas now only the group leader waits while holding the
WALWriteLock. Deliberate or accidental settings to a poor
value could seriously degrade performance for all users.
Privileges may be delegated by SECURITY DEFINER functions
for anyone that needs per-user settings in real situations.
Request for change from Peter Geoghegan
Rather than doing a fairly-expensive setitimer() call to prevent interrupts
from happening, let's just invent a simple boolean flag that the signal
handler is required to check. This is not only faster but considerably
more robust than before, since the previous code effectively assumed that
only ITIMER_REAL events would ever fire the SIGALRM handler, which is
obviously something that can be broken easily by third-party code.
Zoltán Böszörményi and Tom Lane
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
We now write one file per database and one global file, instead of
having the whole thing in a single huge file. This reduces the I/O that
must be done when partial data is required -- which is all the time,
because each process only needs information on its own database anyway.
Also, the autovacuum launcher does not need data about tables and
functions in each database; having the global stats for all DBs is
enough.
Catalog version bumped because we have a new subdir under PGDATA.
Author: Tomas Vondra. Some rework by Álvaro
Testing by Jeff Janes
Other discussion by Heikki Linnakangas, Tom Lane.
This generalizes the existing ALTER ROLE ... SET and ALTER DATABASE
... SET functionality to allow creating settings that apply to all users
in all databases.
reviewed by Pavel Stehule
It's better to start from what the OpenSSL people consider a good
default and then remove insecure things (low encryption, exportable
encryption and md5 at this point) from that, instead of starting
from everything that exists and remove from that. We trust the
OpenSSL people to make good choices about what the default is.
Commit da07a1e8 was broken for EXEC_BACKEND because I failed to realize
that the MaxBackends recomputation needed to be duplicated by
subprocesses in SubPostmasterMain. However, instead of having the value
be recomputed at all, it's better to assign the correct value at
postmaster initialization time, and have it be propagated to exec'ed
backends via BackendParameters.
MaxBackends stays as zero until after modules in
shared_preload_libraries have had a chance to register bgworkers, since
the value is going to be untrustworthy till that's finished.
Heikki Linnakangas and Álvaro Herrera
Background workers are postmaster subprocesses that run arbitrary
user-specified code. They can request shared memory access as well as
backend database connections; or they can just use plain libpq frontend
database connections.
Modules listed in shared_preload_libraries can register background
workers in their _PG_init() function; this is early enough that it's not
necessary to provide an extra GUC option, because the necessary extra
resources can be allocated early on. Modules can install more than one
bgworker, if necessary.
Care is taken that these extra processes do not interfere with other
postmaster tasks: only one such process is started on each ServerLoop
iteration. This means a large number of them could be waiting to be
started up and postmaster is still able to quickly service external
connection requests. Also, shutdown sequence should not be impacted by
a worker process that's reasonably well behaved (i.e. promptly responds
to termination signals.)
The current implementation lets worker processes specify their start
time, i.e. at what point in the server startup process they are to be
started: right after postmaster start (in which case they mustn't ask
for shared memory access), when consistent state has been reached
(useful during recovery in a HOT standby server), or when recovery has
terminated (i.e. when normal backends are allowed).
In case of a bgworker crash, actions to take depend on registration
data: if shared memory was requested, then all other connections are
taken down (as well as other bgworkers), just like it were a regular
backend crashing. The bgworker itself is restarted, too, within a
configurable timeframe (which can be configured to be never).
More features to add to this framework can be imagined without much
effort, and have been discussed, but this seems good enough as a useful
unit already.
An elementary sample module is supplied.
Author: Álvaro Herrera
This patch is loosely based on prior patches submitted by KaiGai Kohei,
and unsubmitted code by Simon Riggs.
Reviewed by: KaiGai Kohei, Markus Wanner, Andres Freund,
Heikki Linnakangas, Simon Riggs, Amit Kapila
The previous definitions of these GUC variables allowed them to range
up to INT_MAX, but in point of fact the underlying code would suffer
overflows or other errors with large values. Reduce the maximum values
to something that won't misbehave. There's no apparent value in working
harder than this, since very large delays aren't sensible for any of
these. (Note: the risk with archive_timeout is that if we're late
checking the state, the timestamp difference it's being compared to
might overflow. So we need some amount of slop; the choice of INT_MAX/2
is arbitrary.)
Per followup investigation of bug #7670. Although this isn't a very
significant fix, might as well back-patch.
We need to avoid calling WaitLatch with timeouts exceeding INT_MAX.
Fortunately a simple clamp will do the trick, since no harm is done if
the wait times out before it's really time to rotate the log file.
Per bug #7670 (probably bug #7545 is the same thing, too).
In passing, fix bogus definition of log_rotation_age's maximum value in
guc.c --- it was numerically right, but only because MINS_PER_HOUR and
SECS_PER_MINUTE have the same value.
Back-patch to 9.2. Before that, syslogger wasn't using WaitLatch.
Rename replication_timeout to wal_sender_timeout, and add a new setting
called wal_receiver_timeout that does the same at the walreceiver side.
There was previously no timeout in walreceiver, so if the network went down,
for example, the walreceiver could take a long time to notice that the
connection was lost. Now with the two settings, both sides of a replication
connection will detect a broken connection similarly.
It is no longer necessary to manually set wal_receiver_status_interval to
a value smaller than the timeout. Both wal sender and receiver now
automatically send a "ping" message if more than 1/2 of the configured
timeout has elapsed, and it hasn't received any messages from the other end.
Amit Kapila, heavily edited by me.
Numerous flex and bison make rules have appeared in the source tree
over time, and they are all virtually identical, so we can replace
them by pattern rules with some variables for customization.
Users of pgxs will also be able to benefit from this.
On some platforms these functions return NULL, rather than the more common
practice of returning a pointer to a zero-sized block of memory. Hack our
various wrapper functions to hide the difference by substituting a size
request of 1. This is probably not so important for the callers, who
should never touch the block anyway if they asked for size 0 --- but it's
important for the wrapper functions themselves, which mistakenly treated
the NULL result as an out-of-memory failure. This broke at least pg_dump
for the case of no user-defined aggregates, as per report from
Matthew Carrington.
Back-patch to 9.2 to fix the pg_dump issue. Given the lack of previous
complaints, it seems likely that there is no live bug in previous releases,
even though some of these functions were in place before that.
This allows easily splitting configuration into many files, deployed in a
directory.
Magnus Hagander, Greg Smith, Selena Deckelmann, reviewed by Noah Misch.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
Management of timeouts was getting a little cumbersome; what we
originally had was more than enough back when we were only concerned
about deadlocks and query cancel; however, when we added timeouts for
standby processes, the code got considerably messier. Since there are
plans to add more complex timeouts, this seems a good time to introduce
a central timeout handling module.
External modules register their timeout handlers during process
initialization, and later enable and disable them as they see fit using
a simple API; timeout.c is in charge of keeping track of which timeouts
are in effect at any time, installing a common SIGALRM signal handler,
and calling setitimer() as appropriate to ensure timely firing of
external handlers.
timeout.c additionally supports pluggable modules to add their own
timeouts, though this capability isn't exercised anywhere yet.
Additionally, as of this commit, walsender processes are aware of
timeouts; we had a preexisting bug there that made those ignore SIGALRM,
thus being subject to unhandled deadlocks, particularly during the
authentication phase. This has already been fixed in back branches in
commit 0bf8eb2a, which see for more details.
Main author: Zoltán Böszörményi
Some review and cleanup by Álvaro Herrera
Extensive reworking by Tom Lane
There was a wild mix of calling conventions: Some were declared to
return void and didn't return, some returned an int exit code, some
claimed to return an exit code, which the callers checked, but
actually never returned, and so on.
Now all of these functions are declared to return void and decorated
with attribute noreturn and don't return. That's easiest, and most
code already worked that way.