Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
Should be limited to the maximum number of connections excluding
autovacuum workers, not including.
Add similar check for max_wal_senders, which should never be higher than
max_connections.
Previously, the -1 option was silently ignored.
Also, emit an error if -1 is used in a context where it won't be
respected, to avoid user confusion.
Original patch by Fabien COELHO, but this version is quite different
from the original submission.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
century specifications just like positive/AD centuries. Previously the
behavior was either wrong or inconsistent with positive/AD handling.
Centuries without years now always assume the first year of the century,
which is now documented.
After taking awhile to digest the row-processor feature that was added to
libpq in commit 92785dac2e, we've concluded
it is over-complicated and too hard to use. Leave the core infrastructure
changes in place (that is, there's still a row processor function inside
libpq), but remove the exposed API pieces, and instead provide a "single
row" mode switch that causes PQgetResult to return one row at a time in
separate PGresult objects.
This approach incurs more overhead than proper use of a row processor
callback would, since construction of a PGresult per row adds extra cycles.
However, it is far easier to use and harder to break. The single-row mode
still affords applications the primary benefit that the row processor API
was meant to provide, namely not having to accumulate large result sets in
memory before processing them. Preliminary testing suggests that we can
probably buy back most of the extra cycles by micro-optimizing construction
of the extra results, but that task will be left for another day.
Marko Kreen
The most user-visible part of this is to change the long options
--statusint and --noloop to --status-interval and --no-loop,
respectively, per discussion.
Also, consistently enclose file names in double quotes, per our
conventions; and consistently use the term "transaction log file" to
talk about WAL segments. (Someday we may need to go over this
terminology and make it consistent across the whole source code.)
Finally, reflow the code to better fit in 80 columns, and have pgindent
fix it up some more.
The initially implemented syntax, "CHECK NO INHERIT (expr)" was not
deemed very good, so switch to "CHECK (expr) NO INHERIT" instead. This
way it looks similar to SQL-standards compliant constraint attribute.
Backport to 9.2 where the new syntax and feature was introduced.
Per discussion.
This is apparently faster than doing things the other way around when
the scale factor is large.
Along the way, adjust -n to suppress vacuuming during initialization
as well as during test runs.
Jeff Janes, with some small changes by me.
Commit 3855968f32 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
Historically we have not worried about fsync'ing anything during initdb
(in fact, initdb intentionally passes -F to each backend launch to prevent
it from fsync'ing). But with filesystems getting more aggressive about
caching data, that's not such a good plan anymore. Make initdb do a pass
over the finished data directory tree to fsync everything. For testing
purposes, the -N/--nosync flag can be used to restore the old behavior.
Also, testing shows that on Linux, sync_file_range() is much faster than
posix_fadvise() for hinting to the kernel that an fsync is coming,
apparently because the latter blocks on a rather small request queue while
the former doesn't. So use this function if available in initdb, and also
in the backend's pg_flush_data() (where it currently will affect only the
speed of CREATE DATABASE's cloning step).
We will later make pg_regress invoke initdb with the --nosync flag
to avoid slowing down cases such as "make check" in contrib. But
let's not do so until we've shaken out any portability issues in this
patch.
Jeff Davis, reviewed by Andres Freund
These functions support removing or replacing array element value(s)
matching a given search value. Although intended mainly to support a
future array-foreign-key feature, they seem useful in their own right.
Marco Nenciarini and Gabriele Bartolini, reviewed by Alex Hunsaker
This hasn't been true since 9.1, when the default was changed to -1.
Remove the reference completely, keeping the discussion of the parameter
and it's shared memory effects on the config page.
Instead of letting every backend participating in a group commit wait
independently, have the first one that becomes ready to flush WAL wait
for the configured delay, and let all the others wait just long enough
for that first process to complete its flush. This greatly increases
the chances of being able to configure a commit_delay setting that
actually improves performance.
As a side consequence of this change, commit_delay now affects all WAL
flushes, rather than just commits. There was some discussion on
pgsql-hackers about whether to rename the GUC to, say, wal_flush_delay,
but in the absence of consensus I am leaving it alone for now.
Peter Geoghegan, with some changes, mostly to the documentation, by me.
A similar change was made previously for pg_cancel_backend, so now it
all matches again.
Dan Farina, reviewed by Fujii Masao, Noah Misch, and Jeff Davis,
with slight kibitzing on the doc changes by me.
The xlogid + segno representation of a particular WAL segment doesn't make
much sense in pg_resetxlog anymore, now that we don't use that anywhere
else. Use the WAL filename instead, since that's a convenient way to name a
particular WAL segment.
I did this partially for pg_resetxlog in the original xlogid/segno -> uint64
patch, but I neglected pg_upgrade and the docs. This should now be more
complete.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
Also, add some cross-links to the indexing documentation, so it's easier
to notice that && and other array operators have index support.
Ryan Kelly, edited by me.
The option --foreign-keys, used at initialization time, will create foreign
key constraints for the columns that represent references to other tables'
primary keys. This can help in benchmarking FK performance.
Jeff Janes
Previously, when executing an ON UPDATE SET NULL or SET DEFAULT action for
a multicolumn MATCH SIMPLE foreign key constraint, we would set only those
referencing columns corresponding to referenced columns that were changed.
This is what the SQL92 standard said to do --- but more recent versions
of the standard say that all referencing columns should be set to null or
their default values, no matter exactly which referenced columns changed.
At least for SET DEFAULT, that is clearly saner behavior. It's somewhat
debatable whether it's an improvement for SET NULL, but it appears that
other RDBMS systems read the spec this way. So let's do it like that.
This is a release-notable behavioral change, although considering that
our documentation already implied it was done this way, the lack of
complaints suggests few people use such cases.
Previously we followed the SQL92 wording, "MATCH <unspecified>", but since
SQL99 there's been a less awkward way to refer to the default style.
In addition to the code changes, pg_constraint.confmatchtype now stores
this match style as 's' (SIMPLE) rather than 'u' (UNSPECIFIED). This
doesn't affect pg_dump or psql because they use pg_get_constraintdef()
to reconstruct foreign key definitions. But other client-side code might
examine that column directly, so this change will have to be marked as
an incompatibility in the 9.3 release notes.
Before, some places didn't document the short options (-? and -V),
some documented both, some documented nothing, and they were listed in
various orders. Now this is hopefully more consistent and complete.
Since this is the easy way of doing it, it should be listed first. All
the old information is retained for those who want the more advanced way.
Also adds a subheading for compressing logs, that seems to have been missing
Aside from adjusting the documentation to say that these are deprecated,
we now report a warning (not an error) for use of GLOBAL, since it seems
fairly likely that we might change that to request SQL-spec-compliant temp
table behavior in the foreseeable future. Although our handling of LOCAL
is equally nonstandard, there is no evident interest in ever implementing
SQL modules, and furthermore some other products interpret LOCAL as
behaving the same way we do. So no expectation of change and no warning
for LOCAL; but it still seems a good idea to deprecate writing it.
Noah Misch
The simplest way to handle this is just to copy-and-paste the relevant
code block in fork_process.c, so that's what I did. (It's possible that
something more complicated would be useful to packagers who want to work
with either the old or the new API; but at this point the number of such
people is rapidly approaching zero, so let's just get the minimal thing
done.) Update relevant documentation as well.
Remove a couple of items that were actually back-patched bug fixes.
Add additional details to a couple of items which lacked a description.
Improve attributions for a couple of items I was involved with.
A few other miscellaneous corrections.
getopt_long() allows abbreviating long options, so we might as well
give the option the full name, and users can abbreviate it how they
like.
Do some general polishing of the --help output at the same time.
To replace it, add -X/--xlog-method that allows the specification
of fetch or stream.
Do this to avoid unnecessary backwards-incompatiblity. Spotted and
suggested by Peter Eisentraut.
Since the replication protocol deals with TimestampTz, we need to
care for the floating point case as well in the frontend tools.
Fujii Masao, with changes from Magnus Hagander
The initial implementation of pg_dump's --section option supposed that the
existing --schema-only and --data-only options could be made equivalent to
--section settings. This is wrong, though, due to dubious but long since
set-in-stone decisions about where to dump SEQUENCE SET items, as seen in
bug report from Martin Pitt. (And I'm not totally convinced there weren't
other bugs, either.) Undo that coupling and instead drive --section
filtering off current-section state tracked as we scan through the TOC
list to call _tocEntryRequired().
To make sure those decisions don't shift around and hopefully save a few
cycles, run _tocEntryRequired() only once per TOC entry and save the result
in a new TOC field. This required minor rejiggering of ACL handling but
also allows a far cleaner implementation of inhibit_data_for_failed_table.
Also, to ensure that pg_dump and pg_restore have the same behavior with
respect to the --section switches, add _tocEntryRequired() filtering to
WriteToc() and WriteDataChunks(), rather than trying to implement section
filtering in an entirely orthogonal way in dumpDumpableObject(). This
required adjusting the handling of the special ENCODING and STDSTRINGS
items, but they were pretty weird before anyway.
Minor other code review for the patch, too.
Drop special handling of host component with slashes to mean
Unix-domain socket. Specify it as separate parameter or using
percent-encoding now.
Allow omitting username, password, and port even if the corresponding
designators are present in URI.
Handle percent-encoding in query parameter keywords.
Alex Shulgin
some documentation improvements by myself
Per discussion, we should explain that we follow RFC 3339 and not really
the letter of the ISO 8601 spec for timestamp output format. Mostly
Brendan Jurd's wording, though I tweaked it to clarify that we do take 'T'
on input. Minor additional copy-editing and markup-tweaking, too.
initdb: Add -T option
oid2name: Put options in some non-random order
pg_dump: Put --section option in the right place
And some additional markup and terminology improvements.
Since we've got an "open items" list item about this, apparently some
people are pretty worried about it.
In passing remove a lot of trailing whitespace.
This example was quite old: it lacked the WAL writer and autovac launcher
as well as the more recently added checkpointer. Linux "ps" seems to show
slightly different stuff now too.
We previously recognized that citext wouldn't get marked as collatable
during pg_upgrade from a pre-9.1 installation, and hacked its
create-from-unpackaged script to manually perform the necessary catalog
adjustments. However, we overlooked the fact that domains over citext,
as well as the citext[] array type, need the same adjustments. Extend
the script to handle those cases.
Also, the documentation suggested that this was only an issue in pg_upgrade
scenarios, which is quite wrong; loading any dump containing citext from a
pre-9.1 server will also result in the type being wrongly marked.
I approached the documentation problem by changing the 9.1.2 release note
paragraphs about this issue, which is historically inaccurate. But it
seems better than having the information scattered in multiple places, and
leaving incorrect info in the 9.1.2 notes would be bad anyway. We'll still
need to mention the issue again in the 9.1.4 notes, but perhaps they can
just reference 9.1.2 for fix instructions.
Per report from Evan Carroll. Back-patch into 9.1.
Rewrite description of "include_if_exists" for clarity. Add subsection
headings to make the structure of the page a little clearer. A couple
other minor improvements too.
Josh Kupershmidt and Tom Lane
HEAD documentation was failing to build as US PDF for me, because a link
to "CREATE CAST" was getting split across pages. Adjust wording to
remove this rather gratuitous cross-reference.
It was already on its last legs, and it turns out that it was
accidentally broken in commit 89e850e6fd
and no one cared. So remove the rest the support for it and update
the documentation to indicate that Python 2.3 is now required.
It'd be nice to be able to spell Jan Urbanski's name with the correct
accent marks, but we haven't yet found a way that works in everybody's
docs toolchain. This way definitely doesn't.
Create separate appendixes for contrib extensions and other server
plugins on the one hand, and utility programs on the other. Recast
the documentation of the latter as refentries, so that man pages are
generated.
This adds the variable COMP_KEYWORD_CASE, which controls in what case
keywords are completed. This is partially to let users configure the
change from commit 69f4f1c357, but it
also offers more behaviors than were available before.
Commit 62c7bd31c8 had assorted problems, most
visibly that it broke PREPARE TRANSACTION in the presence of session-level
advisory locks (which should be ignored by PREPARE), as per a recent
complaint from Stephen Rees. More abstractly, the patch made the
LockMethodData.transactional flag not merely useless but outright
dangerous, because in point of fact that flag no longer tells you anything
at all about whether a lock is held transactionally. This fix therefore
removes that flag altogether. We now rely entirely on the convention
already in use in lock.c that transactional lock holds must be owned by
some ResourceOwner, while session holds are never so owned. Setting the
locallock struct's owner link to NULL thus denotes a session hold, and
there is no redundant marker for that.
PREPARE TRANSACTION now works again when there are session-level advisory
locks, and it is also able to transfer transactional advisory locks to the
prepared transaction, but for implementation reasons it throws an error if
we hold both types of lock on a single lockable object. Perhaps it will be
worth improving that someday.
Assorted other minor cleanup and documentation editing, as well.
Back-patch to 9.1, except that in the 9.1 branch I did not remove the
LockMethodData.transactional flag for fear of causing an ABI break for
any external code that might be examining those structs.
The default for the choice attribute of the <arg> element is "opt",
which would normally put the argument inside brackets. But the DSSSL
stylesheets contain a hack that treats <arg> directly inside <group>
specially, so that <group><arg>-x</arg><arg>-y</arg></group> comes out
as [ -x | -y ] rather than [ [-x] | [-y] ], which it would technically
be. But when building man pages, this doesn't work, and so the
command synopses on the man pages contain lots of extra brackets.
By putting choice="opt" or choice="plain" explicitly on every <arg>
and <group> element, we avoid any toolchain dependencies like that,
and it also makes it clearer in the source code what is meant.
In passing, make some small corrections in the documentation about
which arguments are really optional or not.
Remove the following ports:
- dgux
- nextstep
- sunos4
- svr4
- ultrix4
- univel
These are obsolete and not worth rescuing. In most cases, there is
circumstantial evidence that they wouldn't work anymore anyway.
Add more markup in particular so that the command options appear
consistently in monospace in the HTML output.
On the vacuumdb reference page, remove listing all the possible
options in the synopsis. They have become too many now; we have the
detailed options list for that.
We had changed this from the default bold to monospace for all output
formats, but for man pages, this creates visual inconsistencies, so
revert to the default for man pages.
This patch adjusts the core statistics views to match the decision already
taken for pg_stat_statements, that values representing elapsed time should
be represented as float8 and measured in milliseconds. By using float8,
we are no longer tied to a specific maximum precision of timing data.
(Internally, it's still microseconds, but we could now change that without
needing changes at the SQL level.)
The columns affected are
pg_stat_bgwriter.checkpoint_write_time
pg_stat_bgwriter.checkpoint_sync_time
pg_stat_database.blk_read_time
pg_stat_database.blk_write_time
pg_stat_user_functions.total_time
pg_stat_user_functions.self_time
pg_stat_xact_user_functions.total_time
pg_stat_xact_user_functions.self_time
The first four of these are new in 9.2, so there is no compatibility issue
from changing them. The others require a release note comment that they
are now double precision (and can show a fractional part) rather than
bigint as before; also their underlying statistics functions now match
the column definitions, instead of returning bigint microseconds.
Get rid of the per-column documentation of underlying functions, which did
far more to clutter the view descriptions than it did to be helpful, and
was rather incomplete and typo-ridden anyway. Instead suggest that people
consult the definitions of the standard views to see the underlying
functions.
The older functions for obtaining individual facts about backends are now
somewhat obsoleted by pg_stat_get_activity, which means that they are not
documented by any standard view. So I put that information into a separate
table. (Maybe we should just deprecate them instead?)
In passing, fix a couple more documentation errors.
Display total time and I/O timings in milliseconds, for consistency with
the units used for timings in the core statistics views. The columns
remain of float8 type, so that sub-msec precision is available. (At some
point we will probably want to convert the core views to use float8 type
for the same reason, but this patch does not touch that issue.)
This is a release-note-requiring change in the meaning of the total_time
column. The I/O timing columns are new as of 9.2, so there is no
compatibility impact from redefining them.
Do some minor copy-editing in the documentation, too.
Get rid of section 8.5.6 (Date/Time Internals), which appears to confuse
people more than it helps, and anyway discussion of Postgres' internal
datetime calculation methods seems pretty out of place here. Instead,
make datatype.sgml just say that we follow the Gregorian calendar (a bit
of specification not previously present anywhere in that chapter :-()
and link to the History of Units appendix for more info. Do some mild
editorialization on that appendix, too, to make it clearer that we are
following proleptic Gregorian calendar rules rather than anything more
historically accurate.
Per a question from Florence Cousin and subsequent discussion in
pgsql-docs.
Prohibiting this outright would break dumps taken from older versions
that contain such casts, which would create far more pain than is
justified here.
Per report by Jaime Casanova and subsequent discussion.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
The result object methods colnames() etc. would crash when called
after a command that did not produce a result set. Now they throw an
exception.
discovery and initial patch by Jean-Baptiste Quenot
The output of the new pg_xlog_location_diff function is of type numeric,
since it could theoretically overflow an int8 due to signedness; this
provides a convenient way to format such values.
Fujii Masao, with some beautification by me.
Per mailing list discussion, we would like to keep the bytea functions
parallel to the text functions, so rename bytea_agg to string_agg,
which already exists for text.
Also, to satisfy the rule that we don't want aggregate functions of
the same name with a different number of arguments, add a delimiter
argument, just like string_agg for text already has.
Previously we attempted to throw an error or at least warning for missing
schemas, but this was done inconsistently because of implementation
restrictions (in many cases, GUC settings are applied outside transactions
so that we can't do system catalog lookups). Furthermore, there were
exceptions to the rule even in the beginning, and we'd been poking more
and more holes in it as time went on, because it turns out that there are
lots of use-cases for having some irrelevant items in a common search_path
value. It seems better to just adopt a philosophy similar to what's always
been done with Unix PATH settings, wherein nonexistent or unreadable
directories are silently ignored.
This commit also fixes the documentation to point out that schemas for
which the user lacks USAGE privilege are silently ignored. That's always
been true but was previously not documented.
This is mostly in response to Robert Haas' complaint that 9.1 started to
throw errors or warnings for missing schemas in cases where prior releases
had not. We won't adopt such a significant behavioral change in a back
branch, so something different will be needed in 9.1.
postgres:// URIs are an attempt to "stop the bleeding" in this general
area that has been said to occur due to external projects adopting their
own syntaxes. The syntaxes supported by this patch:
postgres://[user[:pwd]@][unix-socket][:port[/dbname]][?param1=value1&...]
postgres://[user[:pwd]@][net-location][:port][/dbname][?param1=value1&...]
should be enough to cover most interesting cases without having to
resort to "param=value" pairs, but those are provided for the cases that
need them regardless.
libpq documentation has been shuffled around a bit, to avoid stuffing
all the format details into the PQconnectdbParams description, which was
already a bit overwhelming. The list of keywords has moved to its own
subsection, and the details on the URI format live in another subsection.
This includes a simple test program, as requested in discussion, to
ensure that interesting corner cases continue to work appropriately in
the future.
Author: Alexander Shulgin
Some tweaking by Álvaro Herrera, Greg Smith, Daniel Farina, Peter Eisentraut
Reviewed by Robert Haas, Alexey Klyukin (offlist), Heikki Linnakangas,
Marko Kreen, and others
Oh, it also supports postgresql:// but that's probably just an accident.
This patch reverts commit 191ef2b407
and thereby restores the pre-7.3 behavior of EXTRACT(EPOCH FROM
timestamp-without-tz). Per discussion, the more recent behavior was
misguided on a couple of grounds: it makes it hard to get a
non-timezone-aware epoch value for a timestamp, and it makes this one
case dependent on the value of the timezone GUC, which is incompatible
with having timestamp_part() labeled as immutable.
The other behavior is still available (in all releases) by explicitly
casting the timestamp to timestamp with time zone before applying EXTRACT.
This will need to be called out as an incompatible change in the 9.2
release notes. Although having mutable behavior in a function marked
immutable is clearly a bug, we're not going to back-patch such a change.
It's still non-deterministic in some sense ... but given fixed settings
and identical planning problems, it will now always choose the same plan,
so we probably shouldn't tar it with that brush. Per bug #6565 from
Guillaume Cottenceau. Back-patch to 9.0 where the behavior was fixed.
If we make the initially-called function return the table physical-size
estimate, acquire_inherited_sample_rows will be able to use that to
allocate numbers of samples among child tables, when the day comes that
we want to support foreign tables in inheritance trees.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
Ants Aasma's original patch to add timing information for buffer I/O
requests exposed this data at the relation level, which was judged too
costly. I've here exposed it at the database level instead.
This patch provides a test case for libpq's row processor API.
contrib/dblink can deal with very large result sets by dumping them into
a tuplestore (which can spill to disk) --- but until now, the intermediate
storage of the query result in a PGresult meant memory bloat for any large
result. Now we use a row processor to convert the data to tuple form and
dump it directly into the tuplestore.
A limitation is that this only works for plain dblink() queries, not
dblink_send_query() followed by dblink_get_result(). In the latter
case we don't know the desired tuple rowtype soon enough. While hack
solutions to that are possible, a different user-level API would
probably be a better answer.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
Traditionally libpq has collected an entire query result before passing
it back to the application. That provides a simple and transactional API,
but it's pretty inefficient for large result sets. This patch allows the
application to process each row on-the-fly instead of accumulating the
rows into the PGresult. Error recovery becomes a bit more complex, but
often that tradeoff is well worth making.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
pg_stat_statements now hashes selected fields of the analyzed parse tree
to assign a "fingerprint" to each query, and groups all queries with the
same fingerprint into a single entry in the pg_stat_statements view.
In practice it is expected that queries with the same fingerprint will be
equivalent except for values of literal constants. To make the display
more useful, such constants are replaced by "?" in the displayed query
strings.
This mechanism currently supports only optimizable queries (SELECT,
INSERT, UPDATE, DELETE). Utility commands are still matched on the
basis of their literal query strings.
There remain some open questions about how to deal with utility statements
that contain optimizable queries (such as EXPLAIN and SELECT INTO) and how
to deal with expiring speculative hashtable entries that are made to save
the normalized form of a query string. However, fixing these issues should
require only localized changes, and since there are other open patches
involving contrib/pg_stat_statements, it seems best to go ahead and commit
what we've got.
Peter Geoghegan, reviewed by Daniel Farina
Currently, the only way to see the numbers this gathers is via
EXPLAIN (ANALYZE, BUFFERS), but the plan is to add visibility through
the stats collector and pg_stat_statements in subsequent patches.
Ants Aasma, reviewed by Greg Smith, with some further changes by me.
Fix loss of previous expression-simplification work when a transform
function fires: we must not simply revert to untransformed input tree.
Instead build a dummy FuncExpr node to pass to the transform function.
This has the additional advantage of providing a simpler, more uniform
API for transform functions.
Move documentation to a somewhat less buried spot, relocate some
poorly-placed code, be more wary of null constants and invalid typmod
values, add an opr_sanity check on protransform function signatures,
and some other minor cosmetic adjustments.
Note: although this patch touches pg_proc.h, no need for catversion
bump, because the changes are cosmetic and don't actually change the
intended catalog contents.
Per a suggestion from Euler Taveira, it seems like a good idea to include
this information in \du (and \dg) output. This costs nothing for people
who are not using the VALID UNTIL feature, while for those who are, it's
rather critical information.
Fabrízio de Royes Mello
PGAC_PATH_COLLATEINDEX supposed that it could use AC_PATH_PROGS to search
for collateindex.pl, but that macro will only accept files that are marked
executable, and at least some DocBook installations don't mark the script
executable (a case the docs Makefile was already prepared for). Accept the
script if it's present and readable in $DOCBOOKSTYLE/bin, and otherwise
search the PATH as before.
Having fixed that up, we don't need the fallback case that was in the docs
Makefile, and instead can throw an understandable error if configure didn't
find the script. Per recent trouble report from John Lumby.
Document that routine vacuuming is now also important for the purpose
of index-only scans; and mention in the section that describes the
visibility map that it is used to implement index-only scans.
Marti Raudsepp, with some changes by me.
Instead of just stopping after removing an arbitrary subset of orphaned
large objects, commit and start a new transaction after each -l objects.
This is just as effective as the original patch at limiting the number of
locks used, and it doesn't require doing the OID collection process
repeatedly to get everything. Since the option no longer changes the
fundamental behavior of vacuumlo, and it avoids a known server-side
limitation, enable it by default (with a default limit of 1000 LOs per
transaction).
In passing, be more careful about properly quoting the names of tables
and fields, and do some other cosmetic cleanup.
This is intended as infrastructure to allow sepgsql to cooperate with
connection pooling software, by allowing the effective security label
to be set for each new connection.
KaiGai Kohei, reviewed by Yeb Havinga.
add ability to control permissions of created files
have psql echo its queries for easier debugging
output four separate log files, and delete them on success
add -r/--retain option to keep log files after success
make logs file append-only
remove -g/-G/-l logging options
sugggest tailing appropriate log file on failure
enhance -v/--verbose behavior
This patch fixes the other major compatibility-breaking limitation of
SPGiST, that it didn't store anything for null values of the indexed
column, and so could not support whole-index scans or "x IS NULL"
tests. The approach is to create a wholly separate search tree for
the null entries, and use fixed "allTheSame" insertion and search
rules when processing this tree, instead of calling the index opclass
methods. This way the opclass methods do not need to worry about
dealing with nulls.
Catversion bump is for pg_am updates as well as the change in on-disk
format of SPGiST indexes; there are some tweaks in SPGiST WAL records
as well.
Heavily rewritten version of a patch by Oleg Bartunov and Teodor Sigaev.
(The original also stored nulls separately, but it reused GIN code to do
so; which required undesirable compromises in the on-disk format, and
would likely lead to bugs due to the GIN code being required to work in
two very different contexts.)
The original API definition was incapable of supporting whole-index scans
because there was no way to invoke leaf-value reconstruction without
checking any qual conditions. Also, it was inefficient for
multiple-qual-condition scans because value reconstruction got done over
again for each qual condition, and because other internal work in the
consistent functions likewise had to be done for each qual. To fix these
issues, pass the whole scankey array to the opclass consistent functions,
instead of only letting them see one item at a time. (Essentially, the
loop over scankey entries is now inside the consistent functions not
outside them. This makes the consistent functions a bit more complicated,
but not unreasonably so.)
In itself this commit does nothing except save a few cycles in
multiple-qual-condition index scans, since we can't support whole-index
scans on SPGiST indexes until nulls are included in the index. However,
I consider this a must-fix for 9.2 because once we release it will get
very much harder to change the opclass API definition.
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
GetForeignColumnOptions provides some abstraction for accessing
column-specific FDW options, on a par with the access functions that were
already provided here for other FDW-related information.
Adjust file_fdw.c to use GetForeignColumnOptions instead of equivalent
hand-rolled code.
In addition, add some SGML documentation for the functions exported by
foreign.c that are meant for use by FDW authors.
(This is the fdw_helper portion of the proposed pgsql_fdw patch.)
Hanada Shigeru, reviewed by KaiGai Kohei
The original API specification only allowed an FDW to create a single
access path, which doesn't seem like a terribly good idea in hindsight.
Instead, move the responsibility for building the Path node and calling
add_path() into the FDW's PlanForeignScan function. Now, it can do that
more than once if appropriate. There is no longer any need for the
transient FdwPlan struct, so get rid of that.
Etsuro Fujita, Shigeru Hanada, Tom Lane
In backup.sgml, point out that you need to be using the logging collector
if you want to log messages from a failing archive_command script. (This
is an oversimplification, in that it will work without the collector as
long as you're not sending postmaster stderr to /dev/null; but it seems
like a good idea to encourage use of the collector to avoid problems
with multiple processes concurrently scribbling on one file.)
In config.sgml, do some wordsmithing of logging_collector discussion.
Per bug #6518 from Janning Vygen
Comparing two xlog locations are useful for example when calculating
replication lag.
Euler Taveira de Oliveira, reviewed by Fujii Masao, and some cleanups
from me
This patch improves selectivity estimation for the array <@, &&, and @>
(containment and overlaps) operators. It enables collection of statistics
about individual array element values by ANALYZE, and introduces
operator-specific estimators that use these stats. In addition,
ScalarArrayOpExpr constructs of the forms "const = ANY/ALL (array_column)"
and "const <> ANY/ALL (array_column)" are estimated by treating them as
variants of the containment operators.
Since we still collect scalar-style stats about the array values as a
whole, the pg_stats view is expanded to show both these stats and the
array-style stats in separate columns. This creates an incompatible change
in how stats for tsvector columns are displayed in pg_stats: the stats
about lexemes are now displayed in the array-related columns instead of the
original scalar-related columns.
There are a few loose ends here, notably that it'd be nice to be able to
suppress either the scalar-style stats or the array-element stats for
columns for which they're not useful. But the patch is in good enough
shape to commit for wider testing.
Alexander Korotkov, reviewed by Noah Misch and Nathan Boley
The only reason this didn't work before was that parserOpenTable()
rejects composite types. So use relation_openrv() directly and
manually do the errposition() setup that parserOpenTable() does.
For those of us who prefer the formatting of the docs using the
website stylesheets. Use "make STYLE=website draft" (for example) to use.
The stylesheet itself is referenced directly to the website, so there
is currently no copy of it stored in the source repository. Thus, docs
built with it will only look correct if the browser can access the website
when viewing them.
The <literal> markup is not visible as distinct on man pages, which
creates a bit of confusion when looking at the documentation of the
pg_basebackup -l option. Rather than reinventing the entire font
system for man pages to remedy this, just put some quotes around this
particular case, which should also help in other output formats.
Several places were still written as though standard_conforming_strings
didn't exist, much less be the default. Now that it is on by default,
we can simplify the text and just insert occasional notes suggesting that
you might have to think harder if it's turned off. Per discussion of a
suggestion from Hannes Frederic Sowa.
Back-patch to 9.1 where standard_conforming_strings was made the default.
Most people won't read them individually anyway, it's an easy way to find
them, and it's a lot of duplicated information if they are kept in two
different places.
This makes it easier to match a column name with the description of it,
and makes it possible to add more detailed documentation in the future.
This patch does not add that extra documentation at this point, only
the structure required for it.
Modeled on the changes already done to pg_stat_activity.
This check was overlooked when we added function execute permissions to the
system years ago. For an ordinary trigger function it's not a big deal,
since trigger functions execute with the permissions of the table owner,
so they couldn't do anything the user issuing the CREATE TRIGGER couldn't
have done anyway. However, if a trigger function is SECURITY DEFINER,
that is not the case. The lack of checking would allow another user to
install it on his own table and then invoke it with, essentially, forged
input data; which the trigger function is unlikely to realize, so it might
do something undesirable, for instance insert false entries in an audit log
table.
Reported by Dinesh Kumar, patch by Robert Haas
Security: CVE-2012-0866
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
Some line feeds are added to target lists and from lists to make
them more readable. By default they wrap at 80 columns if possible,
but the wrap column is also selectable - if 0 it wraps after every
item.
Andrew Dunstan, reviewed by Hitoshi Harada.
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
Add new psql settings and command-line options to support setting the
field and record separators for unaligned output to a zero byte, for
easier interfacing with other shell tools.
reviewed by Abhijit Menon-Sen
Sometimes it may be useful to get actual row counts out of EXPLAIN
(ANALYZE) without paying the cost of timing every node entry/exit.
With this patch, you can say EXPLAIN (ANALYZE, TIMING OFF) to get that.
Tomas Vondra, reviewed by Eric Theise, with minor doc changes by me.
Do not prompt when options were not specified. Assume --no-createdb,
--no-createrole, --no-superuser by default.
Also disable prompting for user name in dropdb, unless --interactive
was specified.
reviewed by Josh Kupershmidt
In dry-run mode, just the name of the file to be removed is printed to
stdout; this is so the user can easily plug it into another program
through a pipe. If debug mode is also specified, a more verbose message
is printed to stderr.
Author: Gabriele Bartolini
Reviewer: Josh Kupershmidt
Like the XML data type, we simply store JSON data as text, after checking
that it is valid. More complex operations such as canonicalization and
comparison may come later, but this is enough for not.
There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.
The sequence USAGE privilege is sufficiently similar to the SQL
standard that it seems reasonable to show in the information schema.
Also add some compatibility notes about it on the GRANT reference
page.
Add result object functions .colnames, .coltypes, .coltypmods to
obtain information about the result column names and types, which was
previously not possible in the PL/Python SPI interface.
reviewed by Abhijit Menon-Sen
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
Add counters for number and size of temporary files used
for spill-to-disk queries for each database to the
pg_stat_database view.
Tomas Vondra, review by Magnus Hagander
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
This reports the depth level of triggers currently in execution, or zero
if not called from inside a trigger.
No catversion bump in this patch, but you have to initdb if you want
access to the new function.
Author: Kevin Grittner
Replication occurs only to memory on standby, not to disk,
so provides additional performance if user wishes to
reduce durability level slightly. Adds concept of multiple
independent sync rep queues.
Fujii Masao and Simon Riggs
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
That avoids errors when the functions are used in queries like "SELECT
pg_relation_size(oid) FROM pg_class", and a table is dropped concurrently.
Phil Sorber
When creating a child table, or when attaching an existing table as
child of another, we must not allow inheritable constraints to be
merged with non-inheritable ones, because then grandchildren would not
properly get the constraint. This would violate the grandparent's
expectations.
Bugs noted by Robert Haas.
Author: Nikhil Sontakke
Allows a user to use pg_cancel_queries() to cancel queries in
other backends if they are running under the same role.
pg_terminate_backend() still requires superuser permissoins.
Short patch, many authors working on the bikeshed: Magnus Hagander,
Josh Kupershmidt, Edward Muller, Greg Smith.
superuser doesn't have doesn't make much sense, as a superuser can do
whatever he wants through other means, anyway. So instead of granting
replication privilege to superusers in CREATE USER time by default, allow
replication connection from superusers whether or not they have the
replication privilege.
Patch by Noah Misch, per discussion on bug report #6264
Point out in the compatibility section that granting grant options to
PUBLIC is not supported by PostgreSQL. This is already mentioned
earlier, but since it concerns the information schema, it might be
worth pointing out explicitly as a compatibility issue.
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly. This turned out to be very confusing, because it has
nothing to do with the INHERITS feature. So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
In commit e2c2c2e8b1 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love. Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns. Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers. The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.
The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option). Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
You could already rename domains using ALTER TYPE, but with this new
command it is more consistent with how other commands treat domains as
a subcategory of types.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
Operator classes can specify whether or not they support this; this
preserves the flexibility to use lossy representations within an index.
In passing, move constant data about a given index into the rd_amcache
cache area, instead of doing fresh lookups each time we start an index
operation. This is mainly to try to make sure that spgcanreturn() has
insignificant cost; I still don't have any proof that it matters for
actual index accesses. Also, get rid of useless copying of FmgrInfo
pointers; we can perfectly well use the relcache's versions in-place.
The need for this was debated when we put in the index-only-scan feature,
but at the time we had no near-term expectation of having AMs that could
support such scans for only some indexes; so we kept it simple. However,
the SP-GiST AM forces the issue, so let's fix it.
This patch only installs the new API; no behavior actually changes.
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
Valid values are --pre-data, data and post-data. The option can be
given more than once. --schema-only is equivalent to
--section=pre-data --section=post-data. --data-only is equivalent
to --section=data.
Andrew Dunstan, reviewed by Joachim Wieland and Josh Berkus.
This works the same as include, except that an error is not thrown
if the file is missing. Instead the fact that it's missing is
logged.
Greg Smith, reviewed by Euler Taveira de Oliveira.
Andrew Dunstan, reviewed by Josh Berkus, Robert Haas and Peter Geoghegan.
This allows dumping of a table definition but not its data, on a per table basis.
Table name patterns are supported just as for --exclude-table.
Instead, add a function pg_tablespace_location(oid) used to return
the same information, and do this by reading the symbolic link.
Doing it this way makes it possible to relocate a tablespace when the
database is down by simply changing the symbolic link.
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
If unable to connect to "postgres", try "template1". This allows things to
work more smoothly in the case where the postgres database has been
dropped. And just in case that's not good enough, also allow the user to
specify a maintenance database to be used for the initial connection, to
cover the case where neither postgres nor template1 is suitable.
Add a function plpy.cursor that is similar to plpy.execute but uses an
SPI cursor to avoid fetching the entire result set into memory.
Jan Urbański, reviewed by Steve Singer
This can be used to set (or unset) environment variables that will
affect programs called by psql (such as the PAGER), probably most
usefully in a .psqlrc file.
Andrew Dunstan, reviewed by Josh Kupershmidt.
PGresults used to be read-only from the application's viewpoint, but now
that we've exposed various functions that allow modification of a PGresult,
that sweeping statement is no longer accurate. Noted by Dmitriy Igrishin.
The correct information appears in the text, so just remove the statement
in the table, where it did not fit nicely anyway. (Curiously, the correct
info has been there much longer than the erroneous table entry.)
Resolves problem noted by Daniele Varrazzo.
In HEAD and 9.1, also do a bit of wordsmithing on other text on the page.
The WITH [NO] DATA option was not supported, nor the ability to specify
replacement column names; the former limitation wasn't even documented, as
per recent complaint from Naoya Anzai. Fix by moving the responsibility
for supporting these options into the executor. It actually takes less
code this way ...
catversion bump due to change in representation of IntoClause, which might
affect stored rules.
It's not clear that a per-datatype typanalyze function would be any more
useful than a generic typanalyze for ranges. What *is* clear is that
letting unprivileged users select typanalyze functions is a crash risk or
worse. So remove the option from CREATE TYPE AS RANGE, and instead put in
a generic typanalyze function for ranges. The generic function does
nothing as yet, but hopefully we'll improve that before 9.2 release.
Per discussion, the zero-argument forms aren't really worth the catalog
space (just write 'empty' instead). The one-argument forms have some use,
but they also have a serious problem with looking too much like functional
cast notation; to the point where in many real use-cases, the parser would
misinterpret what was wanted.
Committing this as a separate patch, with the thought that we might want
to revert part or all of it if we can think of some way around the cast
ambiguity.
For a very long time, one of the parser's heuristics for resolving
ambiguous operator calls has been to assume that unknown-type literals are
of the same type as the other input (if it's known). However, this was
only used in the first step of quickly checking for an exact-types match,
and thus did not help in resolving matches that require coercion, such as
matches to polymorphic operators. As we add more polymorphic operators,
this becomes more of a problem. This patch adds another use of the same
heuristic as a last-ditch check before failing to resolve an ambiguous
operator or function call. In particular this will let us define the range
inclusion operator in a less limited way (to come in a follow-on patch).
A very long time ago, language names were specified as literals rather
than identifiers, so this code was added to do case-folding. But that
style has ben deprecated for many years so this isn't needed any more.
Language names will still be downcased when specified as unquoted
identifiers, but quoted identifiers or the old style using string
literals will be left as-is.
Change range_lower and range_upper to return NULL rather than throwing an
error when the input range is empty or the relevant bound is infinite. Per
discussion, throwing an error seems likely to be unduly hard to work with.
Also, this is more consistent with the behavior of the constructors, which
treat NULL as meaning an infinite bound.
Change range_before, range_after, range_adjacent to return false rather
than throwing an error when one or both input ranges are empty.
The original definition is unnecessarily difficult to use, and also can
result in undesirable planner failures since the planner could try to
compare an empty range to something else while deriving statistical
estimates. (This was, in fact, the cause of repeatable regression test
failures on buildfarm member jaguar, as well as intermittent failures
elsewhere.)
Also tweak rangetypes regression test to not drop all the objects it
creates, so that the final state of the regression database contains
some rangetype objects for pg_dump testing.
This adds the "auto" option to the \x command, which switches to the
expanded mode when the normal output would be wider than the screen.
reviewed by Noah Misch
This reverts commit 0180bd6180.
contrib/userlock is gone, but user-level locking still exists,
and is exposed via the pg_advisory* family of functions.
Since PostgreSQL 9.0, we've emitted a warning message when an operator
named => is created, because the SQL standard now reserves that token
for another use. But we've also shipped such an operator with hstore.
Use of the function hstore(text, text) has been recommended in
preference to =>(text, text). Per discussion, it's now time to take
the next step and stop shipping the operator. This will allow us to
prohibit the use of => as an operator name in a future release if and
when we wish to support the SQL standard use of this token.
The release notes should mention this incompatibility.
Patch by me, reviewed by David Wheeler, Dimitri Fontaine and Tom Lane.
Add option for parallel streaming of the transaction log while a
base backup is running, to get the logfiles before the server has
removed them.
Also add a tool called pg_receivexlog, which streams the transaction
log into files, creating a log archive without having to wait for
segments to complete, thus decreasing the window of data loss without
having to waste space using archive_timeout. This works best in
combination with archive_command - suggested usage docs etc coming later.
This allows different instances to use the eventlog with different
identifiers, by setting the event_source GUC, similar to how
syslog_ident works.
Original patch by MauMau, heavily modified by Magnus Hagander
A transaction can export a snapshot with pg_export_snapshot(), and then
others can import it with SET TRANSACTION SNAPSHOT. The data does not
leave the server so there are not security issues. A snapshot can only
be imported while the exporting transaction is still running, and there
are some other restrictions.
I'm not totally convinced that we've covered all the bases for SSI (true
serializable) mode, but it works fine for lesser isolation modes.
Joachim Wieland, reviewed by Marko Tiikkaja, and rather heavily modified
by Tom Lane
In general the data returned by an index-only scan should have the
datatypes originally computed by FormIndexDatum. If the index opclasses
use "storage" datatypes different from their input datatypes, the scan
tuple will not have the same rowtype attributed to the index; but we had
a hard-wired assumption that that was true in nodeIndexonlyscan.c. We'd
already hacked around the issue for the one case where the types are
different in btree indexes (btree name_ops), but this would definitely
come back to bite us if we ever implement index-only scans in GiST.
To fix, require the index AM to explicitly provide the tupdesc for the
tuple it is returning. btree can just pass back the index's tupdesc, but
GiST will have to work harder when and if it supports index-only scans.
I had previously proposed fixing this by allowing the index AM to fill the
scan tuple slot directly; but on reflection that seemed like a module
layering violation, since TupleTableSlots are creatures of the executor.
At least in the btree case, it would also be less efficient, since the
tuple deconstruction work would occur even for rows later found to be
invisible to the scan's snapshot.
Rearrange text to improve clarity, and add an example of implicit reference
to a plpgsql variable in a bound cursor's query. Byproduct of some work
I'd done on the "named cursor parameters" patch before giving up on it.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
The documentation neglected to explain its behavior in a script file
(it only ends execution of the script, not psql as a whole), and failed
to mention the long form \quit either.
This might help to avoid confusion between the CREATE USER command,
and the deprecated CREATEUSER option to CREATE ROLE, as per a recent
complaint from Ron Adams. At any rate, having a cross-link here
seems like a good idea; two commands that are so similar should
reference each other.
We copy all the matched tuples off the page during _bt_readpage, instead of
expensively re-locking the page during each subsequent tuple fetch. This
costs a bit more local storage, but not more than 2*BLCKSZ worth, and the
reduction in LWLock traffic is certainly worth that. What's more, this
lets us get rid of the API wart in the original patch that said an index AM
could randomly decline to supply an index tuple despite having asserted
pg_am.amcanreturn. That will be important for future improvements in the
index-only-scan feature, since the executor will now be able to rely on
having the index data available.
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs. So, let's just remove it.
With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not. (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)
There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
We'll now use "exists" for EXISTS(SELECT ...), "array" for ARRAY(SELECT
...), or the sub-select's own result column name for a simple expression
sub-select. Previously, you usually got "?column?" in such cases.
Marti Raudsepp, reviewed by Kyotaro Horiugchi
pg_trgm was already doing this unofficially, but the implementation hadn't
been thought through very well and leaked memory. Restructure the core
GiST code so that it actually works, and document it. Ordinarily this
would have required an extra memory context creation/destruction for each
GiST index search, but I was able to avoid that in the normal case of a
non-rescanned search by finessing the handling of the RBTree. It used to
have its own context always, but now shares a context with the
scan-lifespan data structures, unless there is more than one rescan call.
This should make the added overhead unnoticeable in typical cases.
I've made a significant effort at filling in the "Using EXPLAIN" section
to be reasonably complete about mentioning everything that EXPLAIN can
output, including the "Rows Removed" outputs that were added by Marko
Tiikkaja's recent documentation-free patch. I also updated the examples to
be consistent with current behavior; several of them were not close to what
the current code will do. No doubt there's more that can be done here, but
I'm out of patience for today.
Because these tests require root privileges, not to mention invasive
changes to the security configuration of the host system, it's not
reasonable for them to be invoked by a regular "make check" or "make
installcheck". Instead, dike out the Makefile's knowledge of the tests,
and change chkselinuxenv (now renamed "test_sepgsql") into a script that
verifies the environment is workable and then runs the tests. It's
expected that test_sepgsql will only be run manually.
While at it, do some cleanup in the error checking in the script, and
do some wordsmithing in the documentation.
The keywords and values arguments of these functions are more properly
declared "const char * const *" than just "const char **".
Lionel Elie Mamane, reviewed by Craig Ringer
This mode still exists for backwards compatibility, making
sslmode=require the same as sslmode=verify-ca when the file is present,
but not causing an error when it isn't.
Per bug 6189, reported by Srinivas Aji
This is implemented as a per-column boolean option, rather than trying
to match COPY's convention of a single option listing the column names.
Shigeru Hanada, reviewed by KaiGai Kohei
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
BREAKAGE.
Remove double-quoting of index/table names in reindexdb. BACKWARD
COMPABILITY BREAKAGE.
Document thate user/database names are preserved with double-quoting by
command-line tools like vacuumdb.
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
When building a GiST index that doesn't fit in cache, buffers are attached
to some internal nodes in the index. This speeds up the build by avoiding
random I/O that would otherwise be needed to traverse all the way down the
tree to the find right leaf page for tuple.
Alexander Korotkov
We've now seen more than one gripe from somebody who didn't get the memo
about how to install contrib modules in 9.1. Try to make it a little more
prominent that you aren't supposed to call the scripts directly anymore.
This example wasn't updated when we changed the behavior of bpcharlen()
in 8.0, nor when we changed the number of parameters taken by the bpchar()
cast function in 7.3. Per report from lsliang.
These changes allow backtick command evaluation and psql variable
interpolation to happen on substrings of a single meta-command argument.
Formerly, no such evaluations happened at all if the backtick or colon
wasn't the first character of the argument, and we considered an argument
completed as soon as we'd processed one backtick, variable reference, or
quoted substring. A string like 'FOO'BAR was thus taken as two arguments
not one, not exactly what one would expect. In the new coding, an argument
is considered terminated only by unquoted whitespace or backslash.
Also, clean up a bunch of omissions, infelicities and outright errors in
the psql documentation of variables and metacommand argument syntax.
The previous coding resulted in contrib modules unintentionally overriding
the use of CONTRIB_TESTDB. There seems no particularly good reason to
allow that (after all, the makefile can set CONTRIB_TESTDB if that's really
what it intends).
In passing, document REGRESS_OPTS where the other pgxs.mk options are
documented.
Back-patch to 9.1 --- in prior versions, there were no cases of contrib
modules setting REGRESS_OPTS without including the --dbname switch, so
while the coding was fragile there was no actual bug.
Instead of displaying comments on an arbitrary subset of the object
types which support them, make \dd display comments on exactly those
object types which don't have their own backlash commands. We now
regard the display of comments as properly the job of the relevant
backslash command (though many of them do so only in verbose mode)
rather than something that \dd should be responsible for. However,
a handful of object types have no backlash command, so make \dd
give information about those.
Josh Kupershmidt
The latch infrastructure is now capable of detecting all cases where the
walsender loop needs to wake up, so there is no reason to have an arbitrary
timeout.
Also, modify the walsender loop logic to follow the standard pattern of
ResetLatch, test for work to do, WaitLatch. The previous coding was both
hard to follow and buggy: it would sometimes busy-loop despite having
nothing available to do, eg between receipt of a signal and the next time
it was caught up with new WAL, and it also had interesting choices like
deciding to update to WALSNDSTATE_STREAMING on the strength of information
known to be obsolete.
The relevant backslash commands already exist, so we're just adding an
additional column. With this commit, all objects that have psql backslash
commands and accept comments should now display those comments at least
in verbose mode.
Josh Kupershmidt, with doc additions by me.
\dc and \dD now accept a "+" option, which will cause the comments to
be displayed. Along the way, correct a few oversights in the previous
commit in this area, 3b17efdfdd - namely,
(1) when \dL+ is used, make description still be the last column, for
consistency with what we've done elsewhere; and (2) document the
difference between \dC and \dC+.
Josh Kupershmidt, with a couple of doc changes by me.
Also, handle failure better: don't just blindly keep trying to delete
stuff after the transaction has already failed.
Tim Lewis, reviewed by Josh Kupershmidt, with further hacking by me.
There is what may actually be a mistake in our markup. The problem is
in a situation like
<para>
<command>FOO</command> is ...
there is strictly speaking a line break before "FOO". In the HTML
output, this does not appear to be a problem, but in the man page
output, this shows up, so you get double blank lines at odd places.
So far, we have attempted to work around this with an XSL hack, but
that causes other problems, such as creating run-ins in places like
<acronym>SQL</acronym> <command>COPY</command>
So fix the problem properly by removing the extra whitespace. I only
fixed the problems that affect the man page output, not all the
places.
Somebody added a cross-reference to shared_preload_libraries, but wrote the
wrong variable name when they did it (and didn't bother to make it a link
either).
Spotted by Christoph Anton Mitterer.
The output of \dL (list languages) is fairly narrow, so we just always
display the comment. \dC (list casts) can get fairly wide, so we only
display comments if the new \dC+ option is specified.
Josh Kupershmidt
Also change "switch" to "arg" because "switch" is a bit of a sloppy
term. So the environment variable is called
PSQL_EDITOR_LINENUMBER_ARG. Set "+" as hardcoded default value on
Unix (since "vi" is the hardcoded default editor), so many users won't
have to configure this at all. Move the documentation around a bit to
centralize the editor configuration under environment variables,
rather than repeating bits of it under every backslash command that
invokes an editor.
Previously, xpath() simply returned an empty array if the expression did
not yield a node set. This is useless for expressions that return scalars,
such as one with name() at the top level. Arrange to return the scalar
value as a single-element xml array, instead. (String values will be
suitably escaped.)
This change will also cause xpath_exists() to return true, not false,
for such expressions.
Florian Pflug, reviewed by Radoslaw Smogura
This requires a new shared catalog, pg_shseclabel.
Along the way, fix the security_label regression tests so that they
don't monkey with the labels of any pre-existing objects. This is
unlikely to matter in practice, since only the label for the "dummy"
provider was being manipulated. But this way still seems cleaner.
KaiGai Kohei, with fairly extensive hacking by me.
Standby servers can now have WALSender processes, which can work with
either WALReceiver or archive_commands to pass data. Fully updated
docs, including new conceptual terms of sending server, upstream and
downstream servers. WALSenders terminated when promote to master.
Fujii Masao, review, rework and doc rewrite by Simon Riggs
This is more SQL-spec-compliant, more easily extensible, and better
performing than the old method of inventing special variables.
Pavel Stehule, reviewed by Shigeru Hanada and David Wheeler
When an AccessShareLock, RowShareLock, or RowExclusiveLock is requested
on an unshared database relation, and we can verify that no conflicting
locks can possibly be present, record the lock in a per-backend queue,
stored within the PGPROC, rather than in the primary lock table. This
eliminates a great deal of contention on the lock manager LWLocks.
This patch also refactors the interface between GetLockStatusData() and
pg_lock_status() to be a bit more abstract, so that we don't rely so
heavily on the lock manager's internal representation details. The new
fast path lock structures don't have a LOCK or PROCLOCK structure to
return, so we mustn't depend on that for purposes of listing outstanding
locks.
Review by Jeff Davis.
We already have similar functions for many other object types, including
operator classes, so it seems like we should have this one, too.
Extracted from a larger patch by Josh Kupershmidt
This function supports untranslated detail messages, in the same way that
errmsg_internal supports untranslated primary messages. We've needed this
for some time IMO, but discussion of some cases in the SSI code provided
the impetus to actually add it.
Kevin Grittner, with minor adjustments by me
The commit action of temporary tables is currently not cataloged, so
we can't easily show it. The previous value was outdated from before
we had different commit actions.
The fields were previously wrongly typed as character_data; change to
cardinal_number. Update the documentation and the implementation to
show more clearly that this applies to a feature not available in
PostgreSQL, rather than just not yet being implemented in the
information schema.
In the example for decode(), show the bytea result in hex format,
since that's now the default. Use an E'' string in the example for
quote_literal(), so that it works regardless of the
standard_conforming_strings setting. On the functions-for-binary-strings
page, leave the examples as-is for readability, but add a note pointing out
that they are shown in escape format. Per comments from Thom Brown.
Also, improve the description for encode() and decode() a tad.
Backpatch to 9.0, where bytea_output was introduced.
Per discussion, this structure seems more understandable than what was
there before. Make config.sgml and postgresql.conf.sample agree.
In passing do a bit of editorial work on the variable descriptions.
\ir is short for "include relative"; when used from a script, the
supplied pathname will be interpreted relative to the input file,
rather than to the current working directory.
Gurjeet Singh, reviewed by Josh Kupershmidt, with substantial further
cleanup by me.
As noted by Laurenz Albe, our SGML tools deal rather oddly with chapters
having just one <sect1>. Perhaps the tooling could be fixed, but really
the design of this chapter's introduction is pretty bogus anyhow. Split
it into a true introduction and a <sect1> about the FDW functions, so
that it reads better and dodges the lack-of-a-chapter-TOC problem.
postmaster.log", or nohup.
There was a small issue with LINUX_OOM_ADJ and silent_mode, namely that with
silent_mode the postmaster process incorrectly used the OOM settings meant
for backend processes. We certainly could've fixed that directly, but since
silent_mode was redundant anyway, we might as well just remove it.
Somehow, column rolconfig got removed from the documentation of the
pg_roles view in the 9.0 cycle, although the column is actually still
there. In 9.1, we'd also forgotten to document the rolreplication column.
Spotted by Sakamoto Masahiko.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
Fill in the collation columns of the views attributes, columns,
domains, and element_types. Also update collation information in
sql_implementation_info.
Explain that querying pg_locks does not simultaneously lock both the
normal lock manager and the predicate lock manager.
Per discussion with Kevin Grittner.
This is just like serial and bigserial, except it generates an int2
column rather than int4 or int8.
Mike Pultz, reviewed by Brar Piening and Josh Kupershmidt
This allows deadlock_timeout to be reduced for transactions that are
particularly likely to be involved in a deadlock, thus detecting it
more quickly. It is also potentially useful as a poor-man's deadlock
priority mechanism: a transaction with a high deadlock_timeout is less
likely to be chosen as the victim than one with a low
deadlock_timeout. Since that could be used to game the system, we
make this PGC_SUSET rather than PGC_USERSET.
At some point, it might be worth thinking about a more explicit
priority mechanism, since using this is far from fool-proof. But
let's see whether there's enough use case to justify the additional
work before we go down that route.
Noah Misch, reviewed by Shigeru Hanada
Initially, we use this only to eliminate calls to the varchar()
function in cases where the length is not being reduced and, therefore,
the function call is equivalent to a RelabelType operation. The most
significant effect of this is that we can avoid a table rewrite when
changing a varchar(X) column to a varchar(Y) column, where Y > X.
Noah Misch, reviewed by me and Alexey Klyukin
The release notes may contain non-ASCII characters (for contributor
names), which lynx converts to the encoding determined by the current
locale. The get output that is deterministic and easily readable by
everyone, we make lynx produce LATIN1 and then convert that to ASCII
with transliteration for the non-ASCII characters.
This is a dangerous example to provide because on machines with GNU cp,
it will silently do the wrong thing and risk archive corruption. Worse,
during the 9.0 cycle somebody "improved" the discussion by removing the
warning that used to be there about that, and instead leaving the
impression that the command would work as desired on most Unixen.
It doesn't. Try to rectify the damage by providing an example that is safe
most everywhere, and then noting that you can try cp -i if you want but
you'd better test that.
In back-patching this to all supported branches, I also added an example
command for Windows, which wasn't provided before 9.0.