Normally each module is tested in aq database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This mode, enabled by adding USE_MODULE_DB=1 to the make command line,
runs most modules in a database with the module name embedded in it.
This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.
Still to be done: adapt to the MSVC build system.
Backpatch to 9.0, which is the earliest version it is reasonably possible
to test upgrading from.
--single-transaction to restore each database schema. This yields
performance improvements for databases with many tables. Also, remove
split_old_dump() as it is no longer needed.
Commit 8cb53654db, which introduced DROP
INDEX CONCURRENTLY, managed to break CREATE INDEX CONCURRENTLY via a poor
choice of catalog state representation. The pg_index state for an index
that's reached the final pre-drop stage was the same as the state for an
index just created by CREATE INDEX CONCURRENTLY. This meant that the
(necessary) change to make RelationGetIndexList ignore about-to-die indexes
also made it ignore freshly-created indexes; which is catastrophic because
the latter do need to be considered in HOT-safety decisions. Failure to
do so leads to incorrect index entries and subsequently wrong results from
queries depending on the concurrently-created index.
To fix, add an additional boolean column "indislive" to pg_index, so that
the freshly-created and about-to-die states can be distinguished. (This
change obviously is only possible in HEAD. This patch will need to be
back-patched, but in 9.2 we'll use a kluge consisting of overloading the
formerly-impossible state of indisvalid = true and indisready = false.)
In addition, change CREATE/DROP INDEX CONCURRENTLY so that the pg_index
flag changes they make without exclusive lock on the index are made via
heap_inplace_update() rather than a normal transactional update. The
latter is not very safe because moving the pg_index tuple could result in
concurrent SnapshotNow scans finding it twice or not at all, thus possibly
resulting in index corruption. This is a pre-existing bug in CREATE INDEX
CONCURRENTLY, which was copied into the DROP code.
In addition, fix various places in the code that ought to check to make
sure that the indexes they are manipulating are valid and/or ready as
appropriate. These represent bugs that have existed since 8.2, since
a failed CREATE INDEX CONCURRENTLY could leave a corrupt or invalid
index behind, and we ought not try to do anything that might fail with
such an index.
Also fix RelationReloadIndexInfo to ensure it copies all the pg_index
columns that are allowed to change after initial creation. Previously we
could have been left with stale values of some fields in an index relcache
entry. It's not clear whether this actually had any user-visible
consequences, but it's at least a bug waiting to happen.
In addition, do some code and docs review for DROP INDEX CONCURRENTLY;
some cosmetic code cleanup but mostly addition and revision of comments.
This will need to be back-patched, but in a noticeably different form,
so I'm committing it to HEAD before working on the back-patch.
Problem reported by Amit Kapila, diagnosis by Pavan Deolassee,
fix by Tom Lane and Andres Freund.
The previous definitions of these GUC variables allowed them to range
up to INT_MAX, but in point of fact the underlying code would suffer
overflows or other errors with large values. Reduce the maximum values
to something that won't misbehave. There's no apparent value in working
harder than this, since very large delays aren't sensible for any of
these. (Note: the risk with archive_timeout is that if we're late
checking the state, the timestamp difference it's being compared to
might overflow. So we need some amount of slop; the choice of INT_MAX/2
is arbitrary.)
Per followup investigation of bug #7670. Although this isn't a very
significant fix, might as well back-patch.
existence via open(), rather than collecting a directory listing and
looking up matching relfilenode files with sequential scans of the
array. This speeds up pg_upgrade by 2x for a large number of tables,
e.g. 16k.
Per observation by Ants Aasma.
... and have sepgsql use it to determine whether to check permissions
during certain operations. Indexes that are being created as a result
of REINDEX, for instance, do not need to have their permissions checked;
they were already checked when the index was created.
Author: KaiGai Kohei, slightly revised by me
Numerous flex and bison make rules have appeared in the source tree
over time, and they are all virtually identical, so we can replace
them by pattern rules with some variables for customization.
Users of pgxs will also be able to benefit from this.
The HINTs generated for these error cases vary across builds. We
could try to work around that, but the test cases aren't really useful
enough to justify taking any trouble.
Per buildfarm.
dblink now has its own validator function dblink_fdw_validator(), which is
better than the core function postgresql_fdw_validator() because it gets
the list of legal options from libpq instead of having a hard-wired list.
Make the dblink extension module provide a standard foreign data wrapper
dblink_fdw that encapsulates use of this validator, and recommend use of
that wrapper instead of making up wrappers on the fly.
Unfortunately, because ad-hoc wrappers *were* recommended practice
previously, it's not clear when we can get rid of postgresql_fdw_validator
without causing upgrade problems. But this is a step in the right
direction.
Shigeru Hanada, reviewed by KaiGai Kohei
This allows logging only some fraction of transactions, greatly reducing
the amount of log generated.
Tomas Vondra, reviewed by Robert Haas and Jeff Janes.
On some platforms these functions return NULL, rather than the more common
practice of returning a pointer to a zero-sized block of memory. Hack our
various wrapper functions to hide the difference by substituting a size
request of 1. This is probably not so important for the callers, who
should never touch the block anyway if they asked for size 0 --- but it's
important for the wrapper functions themselves, which mistakenly treated
the NULL result as an out-of-memory failure. This broke at least pg_dump
for the case of no user-defined aggregates, as per report from
Matthew Carrington.
Back-patch to 9.2 to fix the pg_dump issue. Given the lack of previous
complaints, it seems likely that there is no live bug in previous releases,
even though some of these functions were in place before that.
We had a number of variants on the theme of "malloc or die", with the
majority named like "pg_malloc", but by no means all. Standardize on the
names pg_malloc, pg_malloc0, pg_realloc, pg_strdup. Get rid of pg_calloc
entirely in favor of using pg_malloc0.
This is an essentially cosmetic change, so no back-patch. (I did find
a couple of places where psql and pg_dump were using plain malloc or
strdup instead of the pg_ versions, but they don't look significant
enough to bother back-patching.)
entries are not dumped. This fixes an error caused by
droping/recreating the information_schema, but other failures were also
possible.
Backpatch to 9.2.
On reflection (especially after noticing how many buildfarm critters have
__builtin_types_compatible_p but not _Static_assert), it seems like we
ought to try a bit harder to make these macros do something everywhere.
The initial cut at it would have been no help to code that is compiled only
on platforms without _Static_assert, for instance; and in any case not all
our contributors do their initial coding on the latest gcc version.
Some googling about static assertions turns up quite a bit of prior art
for making it work in compilers that lack _Static_assert. The method
that seems closest to our needs involves defining a struct with a bit-field
that has negative width if the assertion condition fails. There seems no
reliable way to get the error message string to be output, but throwing a
compile error with a confusing message is better than missing the problem
altogether.
In the same spirit, if we don't have __builtin_types_compatible_p we can at
least insist that the variable have the same width as the type. This won't
catch errors such as "wrong pointer type", but it's far better than
nothing.
In addition to changing the macro definitions, adjust a
compile-time-constant Assert in contrib/hstore to use StaticAssertStmt,
so we can get some buildfarm coverage on whether that macro behaves sanely
or not. There's surely more places that could be converted, but this is
the first one I came across.
If we call pg_ctl stop, the server might continue and thus
hold a log file for a short time after it has deleted its pid file,
(which is when pg_ctl will exit), and so a subsequent attempt to
open the log file might fail.
We therefore try to open it a few times, sleeping one second between
tries, to give the server time to exit.
This corrects an error that was observed on the buildfarm.
Backpatched to 9.2,
Call pg_dumpall using -f switch instead of redirection, to avoid
writing the output in text mode and generating spurious carriage
returns. Remove to carriage return ignoring hack introduced by
commit e442b0f0c6.
Backpatch to 9.2.
pg_upgrade opened the output from pg_dumpall in text mode and
wrote the split files in text mode. This caused unwanted eating
of intended carriage returns on input and production of spurious
carriage returns on output. To avoid this, open all these files
in binary mode. On non-Windows platforms, this change has no
effect.
Backpatch to 9.0. On 9.0 and 9.1, we also switch from redirecting
pg_dumpall's output to using pg_dumpall's -f switch, for the same
reason.
socket location. Also, prevent putting the socket in the current
directory for pre-9.1 servers in live check and non-live check mode,
because pre-9.1 pg_ctl -w can't handle it.
Backpatch to 9.2.
pg_upgrade produces a platform-specific script to remove the old
directory, but on Windows it has not been making sure that the
paths it writes as arguments for rmdir and del use the backslash
path separator, which will cause these scripts to fail.
The fix is backpatched to Release 9.0.
When starting either an old or new postmaster, force it to place its Unix
socket in the current directory. This makes it even harder for accidental
connections to occur during pg_upgrade, and also works around some
scenarios where the default socket location isn't usable. (For example,
if the default location is something other than "/tmp", it might not exist
during "make check".)
When checking an already-running old postmaster, find out its actual socket
directory location from postmaster.pid, if possible. This dodges problems
with an old postmaster having a configured location different from the
default built into pg_upgrade's libpq. We can't find that out if the old
postmaster is pre-9.1, so also document how to cope with such scenarios
manually.
In support of this, centralize handling of the connection-related command
line options passed to pg_upgrade's subsidiary programs, such as pg_dump.
This should make future changes easier.
Bruce Momjian and Tom Lane
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
The previous signature made it very easy to pass something other than
the printf-format specifier in the corresponding position, without any
warning from the compiler.
While at it, move some of the escaping, redirecting and quoting
responsibilities from the callers into exec_prog() itself. This makes
the callsites cleaner.
Extraction of trigrams did not process LIKE escape sequences properly,
leading to possible misidentification of trigrams near escapes, resulting
in incorrect index search results.
Fujii Masao
libxslt offers the ability to read and write both files and URLs through
stylesheet commands, thus allowing unprivileged database users to both read
and write data with the privileges of the database server. Disable that
through proper use of libxslt's security options.
Also, remove xslt_process()'s ability to fetch documents and stylesheets
from external files/URLs. While this was a documented "feature", it was
long regarded as a terrible idea. The fix for CVE-2012-3489 broke that
capability, and rather than expend effort on trying to fix it, we're just
going to summarily remove it.
While the ability to write as well as read makes this security hole
considerably worse than CVE-2012-3489, the problem is mitigated by the fact
that xslt_process() is not available unless contrib/xml2 is installed,
and the longstanding warnings about security risks from that should have
discouraged prudent DBAs from installing it in security-exposed databases.
Reported and fixed by Peter Eisentraut.
Security: CVE-2012-3488
4741e9afb9. This was done by adding an
optional second log file parameter to exec_prog(), and closing and
reopening the log file between system() calls.
Backpatch to 9.2.
After taking awhile to digest the row-processor feature that was added to
libpq in commit 92785dac2e, we've concluded
it is over-complicated and too hard to use. Leave the core infrastructure
changes in place (that is, there's still a row processor function inside
libpq), but remove the exposed API pieces, and instead provide a "single
row" mode switch that causes PQgetResult to return one row at a time in
separate PGresult objects.
This approach incurs more overhead than proper use of a row processor
callback would, since construction of a PGresult per row adds extra cycles.
However, it is far easier to use and harder to break. The single-row mode
still affords applications the primary benefit that the row processor API
was meant to provide, namely not having to accumulate large result sets in
memory before processing them. Preliminary testing suggests that we can
probably buy back most of the extra cycles by micro-optimizing construction
of the extra results, but that task will be left for another day.
Marko Kreen
This is apparently faster than doing things the other way around when
the scale factor is large.
Along the way, adjust -n to suppress vacuuming during initialization
as well as during test runs.
Jeff Janes, with some small changes by me.
Commit 3855968f32 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
Since the scandir() emulation was taken out of pg_upgrade, there's
no longer any need for scandir_file_pattern to exist as a global
variable. Replace it with a local in the one remaining function
that was making use of it.
Error out on out-of-memory, rather than returning -1, which the sole
existing caller wasn't checking for anyway. There doesn't seem to be
any use-case for making the caller check for failure here.
Detect failure return from readdir().
Use a less platform-dependent method of calculating the entrysize.
It's possible, but not yet confirmed, that this explains bug #6733,
in which Mike Wilson reports a pg_upgrade crash that did not occur
in 9.1. (Note that load_directory is effectively new code in 9.2,
at least on platforms that have scandir().)
Fix up comments, avoid uselessly using two counters, reduce the number
of realloc calls to something sane.
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
When reading from a text- or CSV-format file in file_fdw, the datatype
input routines can consume a significant fraction of the runtime.
Often, the query does not need all the columns, so we can get a useful
speed boost by skipping I/O conversion for unnecessary columns.
To support this, add a "convert_selectively" option to the core COPY code.
This is undocumented and not accessible from SQL (for now, anyway).
Etsuro Fujita, reviewed by KaiGai Kohei
Currently only pg_clog is copied, but some other directories could need
the same treatment as well, so create a subroutine to do it.
Extracted from my (somewhat larger) FOR KEY SHARE patch.
Now the log file not only contains the output from commands executed by
system(), but also what command it was in the first place. This
arrangement makes debugging a lot simpler.
snprintf counts trailing NUL towards the char limit. Failing to account
for that was causing an invalid value to be passed to pg_resetxlog -l,
aborting the upgrade process.
The xlogid + segno representation of a particular WAL segment doesn't make
much sense in pg_resetxlog anymore, now that we don't use that anywhere
else. Use the WAL filename instead, since that's a convenient way to name a
particular WAL segment.
I did this partially for pg_resetxlog in the original xlogid/segno -> uint64
patch, but I neglected pg_upgrade and the docs. This should now be more
complete.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
These days, even a wimpy system can insert 10000 tuples in the blink of
an eye, so there's no real need for this much verbosity.
Per complaint from Tatsuo Ishii.
The option --foreign-keys, used at initialization time, will create foreign
key constraints for the columns that represent references to other tables'
primary keys. This can help in benchmarking FK performance.
Jeff Janes
Before, some places didn't document the short options (-? and -V),
some documented both, some documented nothing, and they were listed in
various orders. Now this is hopefully more consistent and complete.
The simplest way to handle this is just to copy-and-paste the relevant
code block in fork_process.c, so that's what I did. (It's possible that
something more complicated would be useful to packagers who want to work
with either the old or the new API; but at this point the number of such
people is rapidly approaching zero, so let's just get the minimal thing
done.) Update relevant documentation as well.
It failed to check for error return from xsltApplyStylesheet(), as reported
by Peter Gagarinov. (So far as I can tell, libxslt provides no convenient
way to get a useful error message in failure cases. There might be some
inconvenient way, but considering that this code is deprecated it's hard to
get enthusiastic about putting lots of work into it. So I just made it say
"failed to apply stylesheet", in line with the existing error checks.)
While looking at the code I also noticed that the string returned by
xsltSaveResultToString was never freed, resulting in a session-lifespan
memory leak.
Back-patch to all supported versions.
Overly tight coding caused the password transformation loop to stop
examining input once it had processed a byte equal to 0x80. Thus, if the
given password string contained such a byte (which is possible though not
highly likely in UTF8, and perhaps also in other non-ASCII encodings), all
subsequent characters would not contribute to the hash, making the password
much weaker than it appears on the surface.
This would only affect cases where applications used DES crypt() to encode
passwords before storing them in the database. If a weak password has been
created in this fashion, the hash will stop matching after this update has
been applied, so it will be easy to tell if any passwords were unexpectedly
weak. Changing to a different password would be a good idea in such a case.
(Since DES has been considered inadequately secure for some time, changing
to a different encryption algorithm can also be recommended.)
This code, and the bug, are shared with at least PHP, FreeBSD, and OpenBSD.
Since the other projects have already published their fixes, there is no
point in trying to keep this commit private.
This bug has been assigned CVE-2012-2143, and credit for its discovery goes
to Rubin Xu and Joseph Bonneau.
Write the file to a temporary name and then rename() it into the
permanent name, to ensure it can't end up half-written and corrupt
in case of a crash during shutdown.
Unlink the file after it has been read so it's removed from the data
directory and not included in base backups going to replication slaves.
When the column name is an unqualified name, rather than table.column,
the error message complains about too many dotted names, which is
wrong. Report by Peter Eisentraut based on examination of the
sepgsql regression test output, but the problem also affects COMMENT.
New wording as suggested by Tom Lane.
We previously recognized that citext wouldn't get marked as collatable
during pg_upgrade from a pre-9.1 installation, and hacked its
create-from-unpackaged script to manually perform the necessary catalog
adjustments. However, we overlooked the fact that domains over citext,
as well as the citext[] array type, need the same adjustments. Extend
the script to handle those cases.
Also, the documentation suggested that this was only an issue in pg_upgrade
scenarios, which is quite wrong; loading any dump containing citext from a
pre-9.1 server will also result in the type being wrongly marked.
I approached the documentation problem by changing the 9.1.2 release note
paragraphs about this issue, which is historically inaccurate. But it
seems better than having the information scattered in multiple places, and
leaving incorrect info in the 9.1.2 notes would be bad anyway. We'll still
need to mention the issue again in the 9.1.4 notes, but perhaps they can
just reference 9.1.2 for fix instructions.
Per report from Evan Carroll. Back-patch into 9.1.
Display total time and I/O timings in milliseconds, for consistency with
the units used for timings in the core statistics views. The columns
remain of float8 type, so that sub-msec precision is available. (At some
point we will probably want to convert the core views to use float8 type
for the same reason, but this patch does not touch that issue.)
This is a release-note-requiring change in the meaning of the total_time
column. The I/O timing columns are new as of 9.2, so there is no
compatibility impact from redefining them.
Do some minor copy-editing in the documentation, too.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
Remove lots of outdated information that is duplicated by the
better-maintained SGML documentation. In particular, remove the
outdated listing of contrib modules. Update the installation
instructions to mention CREATE EXTENSION, but don't go into too much
detail.
default tablespace, but part of a database that is in a user-defined
tablespace. Caused "file not found" error during upgrade.
Per bug report from Ants Aasma.
Backpatch to 9.1 and 9.0.
There's no need to sit there and increment the stats when we know all the
increments would be zero anyway. The actual additions might not be very
expensive, but skipping acquisition of the spinlock seems like a good
thing. Pushing the logic about initialization of the usage count down into
entry_alloc() allows us to do that while making the code actually simpler,
not more complex. Expansion on a suggestion by Peter Geoghegan.
This patch addresses a deficiency in the previous pg_stat_statements patch.
We want to give sticky entries an initial "usage" factor high enough that
they probably will stick around until their query is completed. However,
if the query never completes (eg it gets an error during execution), the
entry shouldn't persist indefinitely. Manage this by starting out with
a usage setting equal to the (approximate) median usage value within the
whole hashtable, but decaying the value much more aggressively than we
do for normal entries.
Peter Geoghegan
If we make the initially-called function return the table physical-size
estimate, acquire_inherited_sample_rows will be able to use that to
allocate numbers of samples among child tables, when the day comes that
we want to support foreign tables in inheritance trees.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
This patch provides a test case for libpq's row processor API.
contrib/dblink can deal with very large result sets by dumping them into
a tuplestore (which can spill to disk) --- but until now, the intermediate
storage of the query result in a PGresult meant memory bloat for any large
result. Now we use a row processor to convert the data to tuple form and
dump it directly into the tuplestore.
A limitation is that this only works for plain dblink() queries, not
dblink_send_query() followed by dblink_get_result(). In the latter
case we don't know the desired tuple rowtype soon enough. While hack
solutions to that are possible, a different user-level API would
probably be a better answer.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
dblink_exec leaked temporary database connections if any error occurred
after connection setup, for example
SELECT dblink_exec('...connect string...', 'select 1/0');
Add a PG_TRY block to ensure PQfinish gets done when it is needed.
(dblink_record_internal is on the hairy edge of needing similar treatment,
but seems not to be actively broken at the moment.)
Also, in 9.0 and up, only one of the three functions using tuplestore
return mode was properly checking that the query context would allow
a tuplestore result.
Noted while reviewing dblink patch. Back-patch to all supported branches.
The DBLINK_GET_CONN and DBLINK_GET_NAMED_CONN macros did not set the
surrounding function's conname variable, causing errors to be incorrectly
reported as having occurred on the "unnamed" connection in some cases.
This bug was actually visible in two cases in the regression tests,
but apparently whoever added those cases wasn't paying attention.
Noted by Kyotaro Horiguchi, though this is different from his proposed
patch.
Back-patch to 8.4; 8.3 does not have the same type of error reporting
so the patch is not relevant.
It's actually more useful for the module to ignore these. Ignoring
EXECUTE (and not incrementing the nesting level) allows the executor
hooks to charge the time to the underlying prepared query, which
shows up as a stats entry with the original PREPARE as query string
(possibly modified by suppression of constants, which might not be
terribly useful here but it's not worth avoiding). This is much more
useful than cluttering the stats table with a distinct entry for each
textually distinct EXECUTE.
Experimentation with this idea shows that it's also preferable to ignore
PREPARE. If we don't, we get two stats table entries, one with the query
string hash and one with the jumble-derived hash, but with the same visible
query string (modulo those constants). This is confusing and not very
helpful, since the first entry will only receive costs associated with
initial planning of the query, which is not something counted at all
normally by pg_stat_statements. (And if we do start tracking planning
costs, we'd want them blamed on the other hash table entry anyway.)
When tracking nested statements, contrib/pg_stat_statements formerly
double-counted the execution costs of utility statements that directly
contain an executable statement, such as EXPLAIN and DECLARE CURSOR.
This was not obvious since the ProcessUtility and Executor hooks
would each add their measured costs to the same stats table entry.
However, with the new implementation that hashes utility and plannable
statements differently, this showed up as seemingly-duplicate stats
entries. Fix that by disabling the Executor hooks when the query has a
queryId of zero, which was the case already for such statements but is now
more clearly specified in the code. (The zero queryId was causing problems
anyway because all such statements would add to a single bogus entry.)
The PREPARE/EXECUTE case still results in counting the same execution
in two different stats table entries, but it should be much less surprising
to users that there are two entries in such cases.
In passing, include a CommonTableExpr's ctename in the query hash.
I had left it out originally on the grounds that we wanted to omit all
inessential aliases, but since RTE_CTE RTEs are hashing their referenced
names, we'd better hash the CTE names too to make sure we don't hash
semantically different queries the same.
pg_stat_statements now hashes selected fields of the analyzed parse tree
to assign a "fingerprint" to each query, and groups all queries with the
same fingerprint into a single entry in the pg_stat_statements view.
In practice it is expected that queries with the same fingerprint will be
equivalent except for values of literal constants. To make the display
more useful, such constants are replaced by "?" in the displayed query
strings.
This mechanism currently supports only optimizable queries (SELECT,
INSERT, UPDATE, DELETE). Utility commands are still matched on the
basis of their literal query strings.
There remain some open questions about how to deal with utility statements
that contain optimizable queries (such as EXPLAIN and SELECT INTO) and how
to deal with expiring speculative hashtable entries that are made to save
the normalized form of a query string. However, fixing these issues should
require only localized changes, and since there are other open patches
involving contrib/pg_stat_statements, it seems best to go ahead and commit
what we've got.
Peter Geoghegan, reviewed by Daniel Farina
Instead of just stopping after removing an arbitrary subset of orphaned
large objects, commit and start a new transaction after each -l objects.
This is just as effective as the original patch at limiting the number of
locks used, and it doesn't require doing the OID collection process
repeatedly to get everything. Since the option no longer changes the
fundamental behavior of vacuumlo, and it avoids a known server-side
limitation, enable it by default (with a default limit of 1000 LOs per
transaction).
In passing, be more careful about properly quoting the names of tables
and fields, and do some other cosmetic cleanup.
the non-development install. Instead, use the LOAD mechanism to check
for the pg_upgrade_support shared object, like we do for other shared
object checks.
Backpatch to 9.1.
Report from Àlvaro
This is intended as infrastructure to allow sepgsql to cooperate with
connection pooling software, by allowing the effective security label
to be set for each new connection.
KaiGai Kohei, reviewed by Yeb Havinga.
Extracted from a larger patch by Jaime Casanova, reviewed by Noah Misch.
I think this error message could use some more extensive revision, but
this at least makes the handling of spgist consistent with what we do for
other types of indexes that this code doesn't know how to handle.
add ability to control permissions of created files
have psql echo its queries for easier debugging
output four separate log files, and delete them on success
add -r/--retain option to keep log files after success
make logs file append-only
remove -g/-G/-l logging options
sugggest tailing appropriate log file on failure
enhance -v/--verbose behavior
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
GetForeignColumnOptions provides some abstraction for accessing
column-specific FDW options, on a par with the access functions that were
already provided here for other FDW-related information.
Adjust file_fdw.c to use GetForeignColumnOptions instead of equivalent
hand-rolled code.
In addition, add some SGML documentation for the functions exported by
foreign.c that are meant for use by FDW authors.
(This is the fdw_helper portion of the proposed pgsql_fdw patch.)
Hanada Shigeru, reviewed by KaiGai Kohei
The original API specification only allowed an FDW to create a single
access path, which doesn't seem like a terribly good idea in hindsight.
Instead, move the responsibility for building the Path node and calling
add_path() into the FDW's PlanForeignScan function. Now, it can do that
more than once if appropriate. There is no longer any need for the
transient FdwPlan struct, so get rid of that.
Etsuro Fujita, Shigeru Hanada, Tom Lane
Since the current version is 1.1, the 1.0 file isn't really needed. We do
need the 1.0--1.1 upgrade file, so people on 1.0 can upgrade.
Per recent discussion on pgsql-hackers.
The array intersection code would give wrong results if the first entry of
the correct output array would be "1". (I think only this value could be
at risk, since the previous word would always be a lower-bound entry with
that fixed value.)
Problem spotted by Julien Rouhaud, initial patch by Guillaume Lelarge,
cosmetic improvements by me.
This is some preliminary refactoring related to a pending patch
to allow sepgsql-enable sessions to make dynamic label transitions.
But this commit doesn't involve any functional change: it just puts
some bits of code in more logical places.
KaiGai Kohei
The hstore and json datatypes both have record-conversion functions that
pay attention to column names in the composite values they're handed.
We used to not worry about inserting correct field names into tuple
descriptors generated at runtime, but given these examples it seems
useful to do so. Observe the nicer-looking results in the regression
tests whose results changed.
catversion bump because there is a subtle change in requirements for stored
rule parsetrees: RowExprs from ROW() constructs now have to include field
names.
Andrew Dunstan and Tom Lane
Sometimes it may be useful to get actual row counts out of EXPLAIN
(ANALYZE) without paying the cost of timing every node entry/exit.
With this patch, you can say EXPLAIN (ANALYZE, TIMING OFF) to get that.
Tomas Vondra, reviewed by Eric Theise, with minor doc changes by me.
In dry-run mode, just the name of the file to be removed is printed to
stdout; this is so the user can easily plug it into another program
through a pipe. If debug mode is also specified, a more verbose message
is printed to stderr.
Author: Gabriele Bartolini
Reviewer: Josh Kupershmidt
Due to oversights, the encrypt_iv() and decrypt_iv() functions failed to
report certain types of invalid-input errors, and would instead return
random garbage values.
Marko Kreen, per report from Stefan Kaltenbrunner
have pg_upgrade allocate a maximum fixed size buffer for testing the
library file name, rather than base the allocation on the library name.
Backpatch to 9.1.
The original coding examined the next character before verifying that
there *is* a next character. In the worst case with the input buffer
right up against the end of memory, this would result in a segfault.
Problem spotted by Paul Guyot; this commit extends his patch to fix an
additional case. In addition, make the code a tad more readable by not
overloading the usage of *tlen.
All supported platforms support the C89 standard function atexit()
(SunOS 4 probably being the last one not to), and supporting both
makes the code clumsy.
Instead, add a function pg_tablespace_location(oid) used to return
the same information, and do this by reading the symbolic link.
Doing it this way makes it possible to relocate a tablespace when the
database is down by simply changing the symbolic link.
It runs the regression tests, runs pg_upgrade on the populated
database, and compares the before and after dumps. While not actually
a cross-version upgrade, this does detect omissions and bugs in the
involved tools from time to time. It's also possible to do a
cross-version upgrade by manually supplying parameters.
If the existing citext type has not merely been created, but used in any
tables, then the upgrade script wasn't doing enough. We have to update
attcollation for each citext table column, and indcollation for each citext
index column, as well. Per report from Rudolf van der Leeden.
Since PostgreSQL 9.0, we've emitted a warning message when an operator
named => is created, because the SQL standard now reserves that token
for another use. But we've also shipped such an operator with hstore.
Use of the function hstore(text, text) has been recommended in
preference to =>(text, text). Per discussion, it's now time to take
the next step and stop shipping the operator. This will allow us to
prohibit the use of => as an operator name in a future release if and
when we wish to support the SQL standard use of this token.
The release notes should mention this incompatibility.
Patch by me, reviewed by David Wheeler, Dimitri Fontaine and Tom Lane.
Make it use t_isspace() to identify whitespace, rather than relying on
sscanf which is known to get it wrong on some platform/locale combinations.
Get rid of fixed-size buffers. Make it actually continue to parse the file
after ignoring a line with untranslatable characters, as was obviously
intended.
The first of these issues is per gripe from J Smith, though not exactly
either of his proposed patches.
Both dict_int and dict_xsyn were blithely assuming that whatever memory
palloc gives back will be pre-zeroed. This would typically work for
just about long enough to run their regression tests, and no longer :-(.
The pre-9.0 code in dict_xsyn was even lamer than that, as it would
happily give back a pointer to the result of palloc(0), encouraging
its caller to access off the end of memory. Again, this would just
barely fail to fail as long as memory contained nothing but zeroes.
Per a report from Rodrigo Hjort that code based on these examples
didn't work reliably.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
A similar problem for pgstattuple() was fixed in April of 2010 by commit
33065ef8bc, but pgstatindex() seems to have
been overlooked.
Back-patch all the way, as with that commit, though not to 7.4 through
8.1, since those are now EOL.
Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
Since gtrgm_penalty() is usually called many times in a row with the same
"newval" (to determine which item on an index page newval fits into best),
the makesign() calculation is repetitious. It's expensive enough to make
it worth caching the result, so do so. On my machine this is good for
more than a 40% savings in the time needed to build a trigram index on
/usr/share/dict/words. This is all per a suggestion of Heikki's.
In passing, make some mostly-cosmetic improvements in the caching logic in
the other functions in this file that rely on caching info in fn_extra.
Because these tests require root privileges, not to mention invasive
changes to the security configuration of the host system, it's not
reasonable for them to be invoked by a regular "make check" or "make
installcheck". Instead, dike out the Makefile's knowledge of the tests,
and change chkselinuxenv (now renamed "test_sepgsql") into a script that
verifies the environment is workable and then runs the tests. It's
expected that test_sepgsql will only be run manually.
While at it, do some cleanup in the error checking in the script, and
do some wordsmithing in the documentation.
This is implemented as a per-column boolean option, rather than trying
to match COPY's convention of a single option listing the column names.
Shigeru Hanada, reviewed by KaiGai Kohei
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
Add __attribute__ decorations for printf format checking to the places that
were missing them. Fix the resulting warnings. Add
-Wmissing-format-attribute to the standard set of warnings for GCC, so these
don't happen again.
The warning fixes here are relatively harmless. The one serious problem
discovered by this was already committed earlier in
cf15fb5cab.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Don't test whether the number of labels is numerically equal to zero;
count(*) isn't going return zero anyway, and the current coding blows
up if it returns an empty string or an error.
There's no reason for this test to use the undocumented pg_prepared_xact()
function, when it can use the stable API pg_prepared_xacts instead.
Fixes breakage against 8.3, as reported by Justin Arnold.
For an empty index, the pgstatindex() function would compute 0.0/0.0 for
its avg_leaf_density and leaf_fragmentation outputs. On machines that
follow the IEEE float arithmetic standard with any care, that results in
a NaN. However, per report from Rushabh Lathia, Microsoft couldn't
manage to get this right, so you'd get a bizarre error on Windows.
Fix by forcing the results to be NaN explicitly, rather than relying on
the division operator to give that or the snprintf function to print it
correctly. I have some doubts that this is really the most useful
definition, but it seems better to remain backward-compatible with
those platforms for which the behavior wasn't completely broken.
Back-patch to 8.2, since the code is like that in all current releases.
The previous coding resulted in contrib modules unintentionally overriding
the use of CONTRIB_TESTDB. There seems no particularly good reason to
allow that (after all, the makefile can set CONTRIB_TESTDB if that's really
what it intends).
In passing, document REGRESS_OPTS where the other pgxs.mk options are
documented.
Back-patch to 9.1 --- in prior versions, there were no cases of contrib
modules setting REGRESS_OPTS without including the --dbname switch, so
while the coding was fragile there was no actual bug.
We'll have to settle for just listing the extensions' data types,
since function arguments seem to sort differently in different locales.
Per buildfarm results.
When we implemented extensions, we made findDependentObjects() treat
EXTENSION dependency links similarly to INTERNAL links. However, that
logic contained an implicit assumption that an object could have at most
one INTERNAL dependency, so it did not work correctly for objects having
both INTERNAL and DEPENDENCY links. This led to failure to drop some
extension member objects when dropping the extension. Furthermore, we'd
never actually exercised the case of recursing to an internally-referenced
(owning) object from anything other than a NORMAL dependency, and it turns
out that passing the incoming dependency's flags to the owning object is
the Wrong Thing. This led to sometimes dropping a whole extension silently
when we should have rejected the drop command for lack of CASCADE.
Since we obviously were under-testing extension drop scenarios, add some
regression test cases. Unfortunately, such test cases require some
extensions (duh), so we can't test for problems in the core regression
tests. I chose to add them to the earthdistance contrib module, which is
a good test case because it has a dependency on the cube contrib module.
Back-patch to 9.1. Arguably these are pre-existing bugs in INTERNAL
dependency handling, but since it appears that the cases can never arise
pre-9.1, I'll refrain from back-patching the logic changes further than
that.