On Windows, CMD.EXE allegedly does not run a command that uses forward slashes,
so let's convert the path to use backslashes instead.
Backpatch to 10.
Author: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CAMm1aWaNDuaPYFYMAqDeJrZmPtNvLcJRS++CcZWY8LT6KcoBZw@mail.gmail.com
This extends the changes made in commit cebc1d34e, teaching
parseqatom() to generate fewer or cheaper subre nodes in some edge
cases. The case of interest here is a quantified atom that is "messy"
only because it has greediness opposite to what preceded it (whereas
captures and backrefs are intrinsically messy). In this case we don't
need an iteration node, since we don't care where the sub-matches of
the quantifier are; and we might also not need a second concatenation
node. This seems of only marginal real-world use according to my
testing, but I wanted to get it in before wrapping up this series of
regex performance fixes.
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
In some cases, at the time that we're doing an NFA-based precheck
of whether a backref subexpression can match at a particular place
in the string, we already know which substring the referenced
subexpression matched. If so, we might as well forget about the NFA
and just compare the substring; this is faster and it gives an exact
rather than approximate answer.
In general, this optimization can help while we are prechecking within
the second child expression of a concat node, while the capture was
within the first child expression; then the substring was saved during
cdissect() of the first child and will be available to NFA checks done
while cdissect() recurses into the second child. It can help quite a
lot if the tree looks like
concat
/ \
capture concat
/ \
expensive stuff backref
as we will be able to avoid recursively dissecting the "expensive
stuff" before discovering that the backref isn't satisfied with a
particular midpoint that the lower concat node is testing. This
doesn't help if the concat tree is left-deep, as the capture node
won't get set soon enough (and it's hard to fix that without changing
the engine's match behavior). Fortunately, right-deep concat trees
are the common case.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/661609.1614560029@sss.pgh.pa.us
POSIX defines the behavior of back-references thus:
The back-reference expression '\n' shall match the same (possibly
empty) string of characters as was matched by a subexpression
enclosed between "\(" and "\)" preceding the '\n'.
As far as I can see, the back-reference is supposed to consider only
the data characters matched by the referenced subexpression. However,
because our engine copies the NFA constructed from the referenced
subexpression, it effectively enforces any constraints therein, too.
As an example, '(^.)\1' ought to match 'xx', or any other string
starting with two occurrences of the same character; but in our code
it does not, and indeed can't match anything, because the '^' anchor
constraint is included in the backref's copied NFA. If POSIX intended
that, you'd think they'd mention it. Perl for one doesn't act that
way, so it's hard to conclude that this isn't a bug.
Fix by modifying the backref's NFA immediately after it's copied from
the reference, replacing all constraint arcs by EMPTY arcs so that the
constraints are treated as automatically satisfied. This still allows
us to enforce matching rules that depend only on the data characters;
for example, in '(^\d+).*\1' the NFA matching step will still know
that the backref can only match strings of digits.
Perhaps surprisingly, this change does not affect the results of any
of a rather large corpus of real-world regexes. Nonetheless, I would
not consider back-patching it, since it's a clear compatibility break.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/661609.1614560029@sss.pgh.pa.us
The same test for REINDEX (VERBOSE) was done twice, while it is clear
that the second test should use --concurrently. Issue introduced in
5dc92b8, for what looks like a copy-paste mistake.
Reviewed-by: Mark Dilger
Discussion: https://postgr.es/m/A7AE97EA-F4B0-4CAB-8FFF-3FECD31F9D63@enterprisedb.com
Backpatch-through: 12
The same code pattern was repeated twice to enable or disable ROW LEVEL
SECURITY with an ALTER TABLE command. This makes the code slightly
cleaner.
Author: Justin Pryzby
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/20210228211854.GC20769@telsasoft.com
Point to the specific line where the error was detected; the
previous code tended to include several preceding lines as well.
Avoid re-scanning the entire input to recompute which line that
was. Simplify the logic a bit. Add test cases.
Simon Riggs and Hamid Akhtar, reviewed by Daniel Gustafsson and myself
Discussion: https://postgr.es/m/CANbhV-EPBnXm3MF_TTWBwwqgn1a1Ghmep9VHfqmNBQ8BT0f+_g@mail.gmail.com
The psql processes were not explicitly killed (but would eventually
exit due postgres shutting down). For some reason windows perl doesn't
like that, resulting in errors like
Warning: unable to close filehandle GEN20 properly: Bad file descriptor during global destruction.
The test was introduced in d6734a897e3, so no backpatching necessary.
In commit a271a1b50e, we allowed decoding at prepare time and the prepare
was decoded again if there is a restart after decoding it. It was done
that way because we can't distinguish between the cases where we have not
decoded the prepare because it was prior to consistent snapshot or we have
decoded it earlier but restarted. To distinguish between these two cases,
we have introduced an initial_consistent_point at the slot level which is
an LSN at which we found a consistent point at the time of slot creation.
This is also the point where we have exported a snapshot for the initial
copy. So, prepare transaction prior to this point are sent along with
commit prepared.
This commit bumps SNAPBUILD_VERSION because of change in SnapBuild. It
will break existing slots which is fine in a major release.
Author: Ajin Cherian, based on idea by Andres Freund
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
This avoids the need to set up and tear down a fresh WaitEventSet every
time we need need to wait. We have to add an explicit exit on
postmaster exit (FeBeWaitSet isn't set up to do that automatically), so
move the code to do that into a new function to avoid repetition.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
Commit a271a1b50e introduced decoding at prepare time in ReorderBuffer.
This can lead to deadlock for out-of-core logical replication solutions
that uses this feature to build distributed 2PC in case such transactions
lock [user] catalog tables exclusively. They need to inform users to not
have locks on catalog tables (via explicit LOCK command) in such
transactions.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210222222847.tpnb6eg3yiykzpky@alap3.anarazel.de
Cut down on system calls and other overheads by waiting for SIGURG
explicitly with kqueue instead of using a signal handler and self-pipe.
Affects *BSD and macOS systems.
This leaves only the poll implementation with a signal handler and the
traditional self-pipe trick.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Cut down on system calls and other overheads by reading from a signalfd
instead of using a signal handler and self-pipe. Affects Linux sytems,
and possibly others including illumos that implement the Linux epoll and
signalfd interfaces.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Commit 82ebbeb0 added a workaround for systems with no epoll_create1()
and EPOLL_CLOEXEC. Linux < 2.6.27 and glibc < 2.9 are long gone. Now
seems like a good time to drop the extra code, because otherwise we'd
have to add similar already-dead workaround code to new patches using
XXX_CLOEXEC flags that arrived in the same kernel release.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKL_%3DaO%3Dr30N%3Ds9VoDgTqHpRSzePRbA9dkYO7snc7HsxA%40mail.gmail.com
AfterTriggerSaveEvent() wrongly allocates the slot in execution-span
memory context, whereas the correct thing is to allocate it in
a transaction-span context, because that's where the enclosing
AfterTriggersTableData instance belongs into.
Backpatch to 12 (the test back to 11, where it works well with no code
changes, and it's good to have to confirm that the case was previously
well supported); this bug seems introduced by commit ff11e7f4b9.
Reported-by: Bertrand Drouvot <bdrouvot@amazon.com>
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/39a71864-b120-5a5c-8cc5-c632b6f16761@amazon.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Break the synopsis into named parts to make it less confusing.
Make more than zero effort at applying SGML markup. Do a bit
of copy-editing of nearby text.
The synopsis revision is by Alvaro Herrera and Paul Förster,
the rest is my fault. Back-patch to v10 where multi-host
connection strings appeared.
Discussion: https://postgr.es/m/6E752D6B-487C-463E-B6E2-C32E7FB007EA@gmail.com
The previous logic here created a separate pool of arcs for each
state, so that the out-arcs of each state were physically stored
within it. Perhaps this choice was driven by trying to not include
a "from" pointer within each arc; but Spencer gave up on that idea
long ago, and it's hard to see what the value is now. The approach
turns out to be fairly disastrous in terms of memory consumption,
though. In the first place, NFAs built by this engine seem to have
about 4 arcs per state on average, with a majority having only one
or two out-arcs. So pre-allocating 10 out-arcs for each state is
already cause for a factor of two or more bloat. Worse, the NFA
optimization phase moves arcs around with abandon. In a large NFA,
some of the states will have hundreds of out-arcs, so towards the
end of the optimization phase we have a significant number of states
whose arc pools have room for hundreds of arcs each, even though only
a few of those arcs are in use. We have seen real-world regexes in
which this effect bloats the memory requirement by 25X or even more.
Hence, get rid of the per-state arc pools in favor of a single arc
pool for the whole NFA, with variable-sized allocation batches
instead of always asking for 10 at a time. While we're at it,
let's batch the allocations of state structs too, to further reduce
the malloc traffic.
This incidentally allows moveouts() to be optimized in a similar
way to moveins(): when moving an arc to another state, it's now
valid to just re-link the same arc struct into a different outchain,
where before the code invariants required us to make a physically
new arc and then free the old one.
These changes reduce the regex compiler's typical space consumption
for average-size regexes by about a factor of two, and much more for
large or complicated regexes. In a large test set of real-world
regexes, we formerly had half a dozen cases that failed with "regular
expression too complex" due to exceeding the REG_MAX_COMPILE_SPACE
limit (about 150MB); we would have had to raise that limit to
something close to 400MB to make them work with the old code. Now,
none of those cases need more than 13MB to compile. Furthermore,
the test set is about 10% faster overall due to less malloc traffic.
Discussion: https://postgr.es/m/168861.1614298592@sss.pgh.pa.us
makeDependencyGraphWalker and checkWellFormedRecursionWalker
thought they could hold onto a pointer to a list's first
cons cell while the list was modified by recursive calls.
That was okay when the cons cell was actually separately
palloc'd ... but since commit 1cff1b95a, it's quite unsafe,
leading to core dumps or incorrect complaints of faulty
WITH nesting.
In the field this'd require at least a seven-deep WITH nest
to cause an issue, but enabling DEBUG_LIST_MEMORY_USAGE
allows the bug to be seen with lesser nesting depths.
Per bug #16801 from Alexander Lakhin. Back-patch to v13.
Michael Paquier and Tom Lane
Discussion: https://postgr.es/m/16801-393c7922143eaa4d@postgresql.org
Teach VACUUM VERBOSE to report on pages deleted by the _current_ VACUUM
operation -- these are newly deleted pages. VACUUM VERBOSE continues to
report on the total number of deleted pages in the entire index (no
change there). The former is a subset of the latter.
The distinction between each category of deleted index page only arises
with index AMs where page deletion is supported and is decoupled from
page recycling for performance reasons.
This is follow-up work to commit e5d8a999, which made nbtree store
64-bit XIDs (not 32-bit XIDs) in pages at the point at which they're
deleted. Note that the btm_last_cleanup_num_delpages metapage field
added by that commit usually gets set to pages_newly_deleted. The
exceptions (the scenarios in which they're not equal) all seem to be
tricky cases for the implementation (of page deletion and recycling) in
general.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX%3Dd5u-tRYhi-F4wnV2uN2zHpMUXw%40mail.gmail.com
We aren't publishing this file as documentation, and it's been
much more haphazardly maintained than the real docs in func.sgml,
so let's just drop it. I think the only reason I included it in
commit 7bcc6d98f was that the Berkeley-era sources had had a man
page in this directory.
Discussion: https://postgr.es/m/4099447.1614186542@sss.pgh.pa.us
Newline is certainly not a digit, nor a word character, so it is
sensible that it should match these complemented character classes.
Previously, \D and \W acted that way by default, but in
newline-sensitive mode ('n' or 'p' flag) they did not match newlines.
This behavior was previously forced because explicit complemented
character classes don't match newlines in newline-sensitive mode;
but as of the previous commit that implementation constraint no
longer exists. It seems useful to change this because the primary
real-world use for newline-sensitive mode seems to be to match the
default behavior of other regex engines such as Perl and Javascript
... and their default behavior is that these match newlines.
The old behavior can be kept by writing an explicit complemented
character class, i.e. [^[:digit:]] or [^[:word:]]. (This means
that \D and \W are not exactly equivalent to those strings, but
they weren't anyway.)
Discussion: https://postgr.es/m/3220564.1613859619@sss.pgh.pa.us
The complement-class escapes \D, \S, \W are now allowed within
bracket expressions. There is no semantic difficulty with doing
that, but the rather hokey macro-expansion-based implementation
previously used here couldn't cope.
Also, invent "word" as an allowed character class name, thus "\w"
is now equivalent to "[[:word:]]" outside brackets, or "[:word:]"
within brackets. POSIX allows such implementation-specific
extensions, and the same name is used in e.g. bash.
One surprising compatibility issue this raises is that constructs
such as "[\w-_]" are now disallowed, as our documentation has always
said they should be: character classes can't be endpoints of a range.
Previously, because \w was just a macro for "[:alnum:]_", such a
construct was read as "[[:alnum:]_-_]", so it was accepted so long as
the character after "-" was numerically greater than or equal to "_".
Some implementation cleanup along the way:
* Remove the lexnest() hack, and in consequence clean up wordchrs()
to not interact with the lexer.
* Fix colorcomplement() to not be O(N^2) in the number of colors
involved.
* Get rid of useless-as-far-as-I-can-see calls of element()
on single-character character element names in brackpart().
element() always maps these to the character itself, and things
would be quite broken if it didn't --- should "[a]" match something
different than "a" does? Besides, the shortcut path in brackpart()
wasn't doing this anyway, making it even more inconsistent.
Discussion: https://postgr.es/m/2845172.1613674385@sss.pgh.pa.us
Discussion: https://postgr.es/m/3220564.1613859619@sss.pgh.pa.us
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
This parameter description was previously confusing, telling that a
value of 0 disabled completely status updates. This is not true as
there are cases where an update is sent while ignoring this parameter
value. The documentation is improved to outline the difference of
treatment for scheduled status messages and when these are forced.
Reported-by: Dmitriy Kuzmin
Author: Michael Paquier
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/161346024420.3455.1345266601055047937@wrigleys.postgresql.org
d2d8a229bc introduced a new function generate_useful_gather_paths to
be used as a replacement for generate_gather_paths, but forgot to update
a couple of places that referenced the older function.
This is possibly not 100% complete (ref. create_ordered_paths), but it's
better than not changing anything.
Author: "Hou, Zhijie" <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/4ce1d5116fe746a699a6d29858c6a39a@G08CNEXMBPEKD05.g08.fujitsu.local
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
gcc 10 is smart enough to notice that control could reach this
"hasmatch[depth]" assignment with depth < 0, but not smart enough
to know that that would require a badly broken NFA graph. Change
the assert() to a plain runtime test to shut it up.
Per report from Andres Freund.
Discussion: https://postgr.es/m/20210223173437.b3ywijygsy6q42gq@alap3.anarazel.de
As envisioned in commit c98763bf51, it is possible for VACUUM to
ignore certain transactions that are executing CREATE INDEX CONCURRENTLY
and REINDEX CONCURRENTLY for the purposes of computing Xmin; that's
because we know those transactions are not going to examine any other
tables, and are not going to execute anything else in the same
transaction. (Only operations on "safe" indexes can be ignored: those
on indexes that are neither partial nor expressional).
This is extremely useful in cases where CIC/RC can run for a very long
time, because that used to be a significant headache for concurrent
vacuuming of other tables.
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20210115133858.GA18931@alvherre.pgsql
Alvaro Herrera
Tom Lane
Michael Paquier
Thomas Munro
Andres Freund
Amit Kapila
Noah Misch
David Rowley
Peter Eisentraut
Peter Geoghegan
Fujii Masao