When there's a comment on an index that was created with UNIQUE or PRIMARY
KEY constraint syntax, we need to label the comment as depending on the
constraint not the index, since only the constraint object actually appears
in the dump. This incorrect dependency can lead to parallel pg_restore
trying to restore the comment before the index has been created, per bug
#8257 from Lloyd Albin.
This patch fixes pg_dump to produce the right dependency in dumps made
in the future. Usually we also try to hack pg_restore to work around
bogus dependencies, so that existing (wrong) dumps can still be restored in
parallel mode; but that doesn't seem practical here since there's no easy
way to relate the constraint dump entry to the comment after the fact.
Andres Freund
On Unix-ish platforms, EWOULDBLOCK may be the same as EAGAIN, which is
*not* a success return, at least not on Linux. We need to treat it as a
failure to avoid giving a misleading error message. Per the Single Unix
Spec, only EINPROGRESS and EINTR returns indicate that the connection
attempt is in progress.
On Windows, on the other hand, EWOULDBLOCK (WSAEWOULDBLOCK) is the expected
case. We must accept EINPROGRESS as well because Cygwin will return that,
and it doesn't seem worth distinguishing Cygwin from native Windows here.
It's not very clear whether EINTR can occur on Windows, but let's leave
that part of the logic alone in the absence of concrete trouble reports.
Also, remove the test for errno == 0, effectively reverting commit
da9501bddb, which AFAICS was just a thinko;
or at best it might have been a workaround for a platform-specific bug,
which we can hope is gone now thirteen years later. In any case, since
libpq makes no effort to reset errno to zero before calling connect(),
it seems unlikely that that test has ever reliably done anything useful.
Andres Freund and Tom Lane
Valgrind "client requests" in aset.c and mcxt.c teach Valgrind and its
Memcheck tool about the PostgreSQL allocator. This makes Valgrind
roughly as sensitive to memory errors involving palloc chunks as it is
to memory errors involving malloc chunks. Further client requests in
PageAddItem() and printtup() verify that all bits being added to a
buffer page or furnished to an output function are predictably-defined.
Those tests catch failures of C-language functions to fully initialize
the bits of a Datum, which in turn stymie optimizations that rely on
_equalConst(). Define the USE_VALGRIND symbol in pg_config_manual.h to
enable these additions. An included "suppression file" silences nominal
errors we don't plan to fix.
Reviewed in earlier versions by Peter Geoghegan and Korry Douglas.
Move some repeated debugging code into functions and store intermediates
in variables where not presently necessary. No code-generation changes
in a production build, and no functional changes. This simplifies and
focuses the main patch.
Every other core buffer page consumer initializes the bytes it furnishes
to PageAddItem(). For consistency, do the same here. No back-patch;
regardless, we couldn't count on the fix so long as binary upgrade can
carry forward affected index builds.
GNU gettext selects a default encoding for the messages it emits in a
platform-specific manner; it uses the Windows ANSI code page on Windows
and follows LC_CTYPE on other platforms. This is inconvenient for
PostgreSQL server processes, so realize consistent cross-platform
behavior by calling bind_textdomain_codeset() on Windows each time we
permanently change LC_CTYPE. This primarily affects SQL_ASCII databases
and processes like the postmaster that do not attach to a database,
making their behavior consistent with PostgreSQL on non-Windows
platforms. Messages from SQL_ASCII databases use the encoding implied
by the database LC_CTYPE, and messages from non-database processes use
LC_CTYPE from the postmaster system environment. PlatformEncoding
becomes unused, so remove it.
Make write_console() prefer WriteConsoleW() to write() regardless of the
encodings in use. In this situation, write() will invariably mishandle
non-ASCII characters.
elog.c has assumed that messages conform to the database encoding.
While usually true, this does not hold for SQL_ASCII and MULE_INTERNAL.
Introduce MessageEncoding to track the actual encoding of message text.
The present consumers are Windows-specific code for converting messages
to UTF16 for use in system interfaces. This fixes the appearance in
Windows event logs and consoles of translated messages from SQL_ASCII
processes like the postmaster. Note that SQL_ASCII inherently disclaims
a strong notion of encoding, so non-ASCII byte sequences interpolated
into messages by %s may yet yield a nonsensical message. MULE_INTERNAL
has similar problems at present, albeit for a different reason: its lack
of libiconv support or a conversion to UTF8.
Consequently, one need no longer restart Windows with a different
Windows ANSI code page to broadly test backend logging under a given
language. Changing the user's locale ("Format") is enough. Several
accounts can simultaneously run postmasters under different locales, all
correctly logging localized messages to Windows event logs and consoles.
Alexander Law and Noah Misch
Clang 3.3 correctly complains that a variable of type enum
MultiXactStatus cannot hold a value of -1, which makes sense. Change
the declared type of the variable to int instead, and apply casting as
necessary to avoid the warning.
Per notice from Andres Freund
In binary upgrade mode, we need to recreate and then drop dropped
columns so that all the columns get the right attribute number. This is
true for foreign tables as well as for native tables. For foreign
tables we have been getting the first part right but not the second,
leading to bogus columns in the upgraded database. Fix this all the way
back to 9.1, where foreign tables were introduced.
In replication, when we shutdown the master, walsender tries to send
all the outstanding WAL records to the standby, and then to exit. This
basically means that all the WAL records are fully synced between
two servers after the clean shutdown of the master. So, after
promoting the standby to new master, we can restart the stopped
master as new standby without the need for a fresh backup from
new master.
But there was one problem so far: though walsender tries to send all
the outstanding WAL records, it doesn't wait for them to be replicated
to the standby. Then, before receiving all the WAL records,
walreceiver can detect the closure of connection and exit. We cannot
guarantee that there is no missing WAL in the standby after clean
shutdown of the master. In this case, backup from new master is
required when restarting the stopped master as new standby.
This patch fixes this problem. It just changes walsender so that it
waits for all the outstanding WAL records to be replicated to the
standby before closing the replication connection.
Per discussion, this is a fix that needs to get backpatched rather than
new feature. So, back-patch to 9.1 where enough infrastructure for
this exists.
Patch by me, reviewed by Andres Freund.
Follow-up to commit 873ab97219, in which
I noted that WaitLatch was a better solution in the commit log message,
but neglected to add any documentation in the code.
In some cases with higher numbers of subtransactions
it was possible for us to incorrectly initialize
subtrans leading to complaints of missing pages.
Bug report by Sergey Konoplev
Analysis and fix by Andres Freund
Most of the documentation uses "single-user mode", so use that in the
code as well. Adjust the documentation to match the new error message
wording. Also add a documentation index entry for "single-user mode".
Based-on-patch-by: Jeff Janes <jeff.janes@gmail.com>
In Danish collations, there are letter combinations which sort
higher than 'Z'. A test for values > 'WA' was picking up rows
where the value started with 'AA', causing the test to fail.
Backpatch to 9.2, where the failing test was added.
Per report from Svenne Krap and analysis by Jeff Janes
MarkBufferDirtyHint() writes WAL, and should know if it's got a
standard buffer or not. Currently, the only callers where buffer_std
is false are related to the FSM.
In passing, rename XLOG_HINT to XLOG_FPI, which is more descriptive.
Back-patch to 9.3.
This avoids platform-dependent behavior wherein pg_sleep() might fail to be
interrupted by statement timeout, query cancel, SIGTERM, etc. Also, since
there's no reason to wake up once a second any more, we can reduce the
power consumption of a sleeping backend a tad.
Back-patch to 9.3, since use of SA_RESTART for SIGALRM makes this a bigger
issue than it used to be.
The exclusion of SIGALRM dates back to Berkeley days, when Postgres used
SIGALRM in only one very short stretch of code. Nowadays, allowing it to
interrupt kernel calls doesn't seem like a very good idea, since its use
for statement_timeout means SIGALRM could occur anyplace in the code, and
there are far too many call sites where we aren't prepared to deal with
EINTR failures. When third-party code is taken into consideration, it
seems impossible that we ever could be fully EINTR-proof, so better to
use SA_RESTART always and deal with the implications of that. One such
implication is that we should not assume pg_usleep() will be terminated
early by a signal. Therefore, long sleeps should probably be replaced
by WaitLatch operations where practical.
Back-patch to 9.3 so we can get some beta testing on this change.
This is just neatnik-ism, since all the tests in the code are #ifdefs,
but we shouldn't specify symbols as "Define to 1 ..." and then not
actually define them that way.
SP-GiST's original scheme for avoiding deadlocks during concurrent index
insertions doesn't work, as per report from Hailong Li, and there isn't any
evident way to make it work completely. We could possibly lock individual
inner tuples instead of their whole pages, but preliminary experimentation
suggests that the performance penalty would be huge. Instead, if we fail
to get a buffer lock while descending the tree, just restart the tree
descent altogether. We keep the old tuple positioning rules, though, in
hopes of reducing the number of cases where this can happen.
Teodor Sigaev, somewhat edited by Tom Lane
elog.c has historically treated LOG messages as low-priority during
bootstrap and standalone operation. This has led to confusion and even
masked a bug, because the normal expectation of code authors is that
elog(LOG) will put something into the postmaster log, and that wasn't
happening during initdb. So get rid of the special-case rule and make
the priority order the same as it is in normal operation. To keep from
cluttering initdb's output and the behavior of a standalone backend,
tweak the severity level of three messages routinely issued by xlog.c
during startup and shutdown so that they won't appear in these cases.
Per my proposal back in December.
pg_filedump and other external utility programs are likely to want to be
able to check Postgres page checksums. To avoid messy duplication of code,
move the checksumming functionality into an exported header file, much as
we did awhile back for the CRC code.
In passing, get rid of an unportable assumption that a static char[] array
will be word-aligned, and do some other minor code beautification.
Memory was allocated based on the sizeof a type that was not the type of
the pointer that the result was being assigned to. The types happen to
be of the same size, but it's still wrong.
In most scenarios a portal without a ResourceOwner is dead and not subject
to any further execution, but a portal for a cursor WITH HOLD remains in
existence with no ResourceOwner after the creating transaction is over.
In this situation, if we attempt to "execute" the portal directly to fetch
data from it, we were setting CurrentResourceOwner to NULL, leading to a
segfault if the datatype output code did anything that required a resource
owner (such as trying to fetch system catalog entries that weren't already
cached). The case appears to be impossible to provoke with stock libpq,
but psqlODBC at least is able to cause it when working with held cursors.
Simplest fix is to just skip the assignment to CurrentResourceOwner, so
that any resources used by the data output operations will be managed by
the transaction-level resource owner instead. For consistency I changed
all the places that install a portal's resowner as current, even though
some of them are probably not reachable with a held cursor's portal.
Per report from Joshua Berry (with thanks to Hiroshi Inoue for developing
a self-contained test case). Back-patch to all supported versions.
Several loops in the JSON parser examined a byte in memory just before
checking whether its address was in-bounds, so they could read one byte
beyond the datum's allocation. A SIGSEGV is possible. New in 9.3, so
no back-patch.
Since commit f21bb9cfb5, this function
ignores the caller-provided length and loops until it finds a
terminator, which GetVirtualXIDsDelayingChkpt() never adds. Restore the
previous loop control logic. In passing, revert the addition of an
unused variable by the same commit, presumably a debugging relic.
Consumers are entitled to read the full 64 bytes pertaining to a Name;
using a shorter NULL-terminated string leads to reading beyond the end
its allocation; a SIGSEGV is possible. Use the frequent idiom of
copying to a NameData on the stack. New in 9.3, so no back-patch.
Extend the FDW API (which we already changed for 9.3) so that an FDW can
report whether specific foreign tables are insertable/updatable/deletable.
The default assumption continues to be that they're updatable if the
relevant executor callback function is supplied by the FDW, but finer
granularity is now possible. As a test case, add an "updatable" option to
contrib/postgres_fdw.
This patch also fixes the information_schema views, which previously did
not think that foreign tables were ever updatable, and fixes
view_is_auto_updatable() so that a view on a foreign table can be
auto-updatable.
initdb forced due to changes in information_schema views and the functions
they rely on. This is a bit unfortunate to do post-beta1, but if we don't
change this now then we'll have another API break for FDWs when we do
change it.
Dean Rasheed, somewhat editorialized on by Tom Lane
Per discussion on -hackers. We treat Unicode escapes when unescaping
them similarly to the way we treat them in PostgreSQL string literals.
Escapes in the ASCII range are always accepted, no matter what the
database encoding. Escapes for higher code points are only processed in
UTF8 databases, and attempts to process them in other databases will
result in an error. \u0000 is never unescaped, since it would result in
an impermissible null byte.
We need to increment the refcount on the composite type's cached tuple
descriptor while we do lookups of its column types. Otherwise a cache
flush could occur and release the tuple descriptor before we're done with
it. This fails reliably with -DCLOBBER_CACHE_ALWAYS, but the odds of a
failure in a production build seem rather low (since the pfree'd descriptor
typically wouldn't get scribbled on immediately). That may explain the
lack of any previous reports. Buildfarm issue noted by Christian Ullrich.
Back-patch to 9.1 where the bogus code was added.
pg_isready displays the host name and the port number that it uses to connect
to the server. So far, pg_isready didn't use the conninfo specified in -d option
for calculating those host name and port number. This can lead to wrong display
to a user. This commit changes pg_isready so that it uses the conninfo for that
calculation.
Original patch by Phil Sorber, modified by me.
getSchemaData() must identify extension member objects and mark them
as not to be dumped. This must happen after reading all objects that can be
direct members of extensions, but before we begin to process table subsidiary
objects. Both rules and event triggers were wrong in this regard.
Backport rules portion of patch to 9.1 -- event triggers do not exist prior to 9.3.
Suggested fix by Tom Lane, initial complaint and patch by me.
When the existing code here was written, it made sense to special-case
RowExprs because that was the only way that we could handle row comparisons
at all. Now that we have record_eq() and arrays of composites, the generic
logic for "scalar" types will in fact work on RowExprs too, so there's no
reason to throw error for combinations of RowExprs and other ways of
forming composite values, nor to ignore the possibility of using a
ScalarArrayOpExpr. But keep using the old logic when comparing two
RowExprs, for consistency with the main transformAExprOp() logic. (This
allows some cases with not-quite-identical rowtypes to succeed, so we might
get push-back if we removed it.) Per bug #8198 from Rafal Rzepecki.
Back-patch to all supported branches, since this works fine as far back as
8.4.
Rafal Rzepecki and Tom Lane
Per discussion, this restriction isn't needed for any real security reason,
and it seems to confuse people more often than it helps them. It could
also result in some database states being unrestorable. So just drop it.
Back-patch to 9.0, where ALTER DEFAULT PRIVILEGES was introduced.
AllocateFile(), AllocateDir(), and some sister routines share a small array
for remembering requests, so that the files can be closed on transaction
failure. Previously that array had a fixed size, MAX_ALLOCATED_DESCS (32).
While historically that had seemed sufficient, Steve Toutant pointed out
that this meant you couldn't scan more than 32 file_fdw foreign tables in
one query, because file_fdw depends on the COPY code which uses
AllocateFile(). There are probably other cases, or will be in the future,
where this nonconfigurable limit impedes users.
We can't completely remove any such limit, at least not without a lot of
work, since each such request requires a kernel file descriptor and most
platforms limit the number we can have. (In principle we could
"virtualize" these descriptors, as fd.c already does for the main VFD pool,
but not without an additional layer of overhead and a lot of notational
impact on the calling code.) But we can at least let the array size be
configurable. Hence, change the code to allow up to max_safe_fds/2
allocated file requests. On modern platforms this should allow several
hundred concurrent file_fdw scans, or more if one increases the value of
max_files_per_process. To go much further than that, we'd need to do some
more work on the data structure, since the current code for closing
requests has potentially O(N^2) runtime; but it should still be all right
for request counts in this range.
Back-patch to 9.1 where contrib/file_fdw was introduced.
Long-standing code has called tolower() on identifier character bytes
with the high bit set. This is clearly an error and produces junk output
when the encoding is multi-byte. This patch therefore restricts this
activity to cases where there is a character with the high bit set AND
the encoding is single-byte.
There have been numerous gripes about this, most recently from Martin
Schäfer.
Backpatch to all live releases.
In 9.2, Unicode escape sequences are not analysed at all other than
to make sure that they are in the form \uXXXX. But in 9.3 many of the
new operators and functions try to turn JSON text values into text in
the server encoding, and this includes de-escaping Unicode escape
sequences. This processing had not taken into account the possibility
that this might contain a surrogate pair to designate a character
outside the BMP. That is now handled correctly.
This also enforces correct use of surrogate pairs, something that is not
done by the type's input routines. This fact is noted in the docs.
The planner is aware that it mustn't push down upper-level quals into
subqueries if the quals reference subquery output columns that contain
set-returning functions or volatile functions, or are non-DISTINCT outputs
of a DISTINCT ON subquery. However, it missed making this check when
there were one or more levels of UNION or INTERSECT above the dangerous
expression. This could lead to "set-valued function called in context that
cannot accept a set" errors, as seen in bug #8213 from Eric Soroos, or to
silently wrong answers in the other cases.
To fix, refactor the checks so that we make the column-is-unsafe checks
during subquery_is_pushdown_safe(), which already has to recursively
inspect all arms of a set-operation tree. This makes
qual_is_pushdown_safe() considerably simpler, at the cost that we will
spend some cycles checking output columns that possibly aren't referenced
in any upper qual. But the cases where this code gets executed at all
are already nontrivial queries, so it's unlikely anybody will notice any
slowdown of planning.
This has been broken since commit 05f916e6ad,
which makes the bug over ten years old. A bit surprising nobody noticed it
before now.
In commit 2c92edad48, I broke "EXPLAIN
(ANALYZE)" syntax, because I mistakenly thought that ANALYZE/ANALYSE were
only partially reserved and thus would be included in NonReservedWord;
but actually they're fully reserved so they still need to be called out
here.
A nicer solution would be to demote these words to type_func_name_keyword
status (they can't be less than that because of "VACUUM [ANALYZE] ColId").
While that works fine so far as the core grammar is concerned, it breaks
ECPG's grammar for reasons I don't have time to isolate at the moment.
So do this for the time being.
Per report from Kevin Grittner. Back-patch to 9.0, like the previous
commit.
The new message (and SQLSTATE) matches the corresponding error cases in
namespace.c.
This was thought to be a "can't happen" case when extension.c was written,
so we didn't think hard about how to report it. But it definitely can
happen in 9.2 and later, since we no longer require search_path to contain
any valid schema names. It's probably also possible in 9.1 if search_path
came from a noninteractive source. So, back-patch to all releases
containing this code.
Per report from Sean Chittenden, though this isn't exactly his patch.
Use the same gcc atomic functions as we do on newer ARM chips.
(Basically this is a copy and paste of the __arm__ code block,
but omitting the SWPB option since that definitely won't work.)
Back-patch to 9.2. The patch would work further back, but we'd also
need to update config.guess/config.sub in older branches to make them
build out-of-the-box, and there hasn't been demand for it.
Mark Salter
The array allocated by GetRunningTransactionLocks() needs to be pfree'd
when we're done with it. Otherwise we leak some memory during each
checkpoint, if wal_level = hot_standby. This manifests as memory bloat
in the checkpointer process, or in bgwriter in versions before we made
the checkpointer separate.
Reported and fixed by Naoya Anzai. Back-patch to 9.0 where the issue
was introduced.
In passing, improve comments for GetRunningTransactionLocks(), and add
an Assert that we didn't overrun the palloc'd array.
"eval q{foo}" used to complain that the error was on line 2 of the eval'd
string, because eval internally tacked on "\n;" so that the end of the
erroneous command was indeed on line 2. But as of Perl 5.18 it more
sanely says that the error is on line 1. To avoid Perl-version-dependent
regression test results, use "eval q{foo;}" instead in the two places
where this matters. Per buildfarm.
Since people might try to use newer Perl versions with older PG releases,
back-patch as far as 9.0 where these test cases were added.
This reverts commit a475c60367.
Erik Rijkers reported back in January 2013 that after the patch, if you do
"pg_dump -t myschema.mytable" to dump a single table, and restore that in
a database where myschema does not exist, the table is silently created in
pg_catalog instead. That is because pg_dump uses
"SET search_path=myschema, pg_catalog" to set schema the table is created
in. While allow_system_table_mods is not a very elegant solution to this,
we can't leave it as it is, so for now, revert it back to the way it was
previously.
Seems cleaner to get the currently-replayed TLI in the same call to
GetXLogReplayRecPtr that we get the WAL position. Make it more clear in the
comment what the code does when recovery has already ended
(RecoveryInProgress() will set ThisTimeLineID in that case). Finally, make
resetting ThisTimeLineID afterwards more explicit.
This change makes type_func_name_keywords less reserved than they were
before, by allowing them for role names, language names, EXPLAIN and COPY
options, and SET values for GUCs; which are all places where few if any
actual keywords could appear instead, so no new ambiguities are introduced.
The main driver for this change is to allow "COPY ... (FORMAT BINARY)"
to work without quoting the word "binary". That is an inconsistency that
has been complained of repeatedly over the years (at least by Pavel Golub,
Kurt Lidl, and Simon Riggs); but we hadn't thought of any non-ugly solution
until now.
Back-patch to 9.0 where the COPY (FORMAT BINARY) syntax was introduced.
Make slightly better decisions about indentation than what pgindent
is capable of. Mostly breaking out long function calls into one
line per argument, with a few other minor adjustments.
No functional changes- all whitespace.
pgindent ran cleanly (didn't change anything) after.
Passes all regressions.
When COPY uses the multi-insert method to insert a batch of tuples into the
heap at a time, incorrect line number was printed if something went wrong in
inserting the index tuples (primary key failure, for exampl), or processing
after row triggers.
Fixes bug #8173 reported by Lloyd Albin. Backpatch to 9.2, where the multi-
insert code was added.
checkpointer needs to reset ThisTimeLineID after
a restartpoint to allow installing/recycling new
WAL files. If recovery has already ended this
would leave ThisTimeLineID set incorrectly and
so we must reset it otherwise later checkpoints
do not have the correct timeline.
Bug report by Heikki Linnakangas.
Further investigation by Heikki and myself.
In the primary_conninfo line that "pg_basebackup -R" generates, single
quotes in parameter values need to be escaped into \\'; the libpq parser
requires the quotes to be escaped into \', and recovery.conf parser requires
the \ to be escaped into \\.
Also, don't quote parameter values unnecessarily, to make the connection
string prettier. Most options in a libpq connection string don't need
quoting.
Reported by Hari Babu, closer analysis by Zoltan Boszormenyi, although I
didn't use his patch.
This simplifies the handling of crashes after fast promotion and various
minor cases that can exist in short timing windows around that case.
Broad fix to bug reported by Michael Paquier on -hackers,
approach prompted by Heikki Linnakangas
euc_* and mule_internal test cases were identical to the ones in
src/test/mb. sql_ascii didn't exist elsewhere, but has been broken since
2001, and doesn't seem very interesting anyway. drop.sql hasn't been used
since 2000, when regress.sh was removed.
Fixes oversight in commit 2ffa740be9.
Per report from Josh Kupershmidt.
I think we've broken this case before, so let's add a regression test
this time.
PathNameOpenFile failed to ensure that the correct value of errno was
returned to its caller after a failure (because it incorrectly supposed
that free() can never change errno). In some cases this would result
in a user-visible failure because an expected ENOENT errno was replaced
with something else. Bogus EINVAL failures have been observed on OS X,
for example.
There were also a couple of places that could mangle an important value
of errno if FDDEBUG was defined. While the usefulness of that debug
support is highly debatable, we might as well make it safe to use,
so add errno save/restore logic to the DO_DB macro.
Per bug #8167 from Nelson Minar, diagnosed by RhodiumToad.
Back-patch to all supported branches.
The behavior is that the required sequence is created locally, which is
appropriate because the default expression will be evaluated locally.
Per gripe from Brad Nicholson that this case was refused with a confusing
error message. We could have improved the error message but it seems
better to just allow the case.
Also, remove ALTER TABLE's arbitrary prohibition against being applied to
foreign tables, which was pretty inconsistent considering we allow it for
views, sequences, and other relation types that aren't even called tables.
This is needed to avoid breaking pg_dump, which sometimes emits column
defaults using separate ALTER TABLE commands. (I think this can happen
even when the default is not associated with a sequence, so that was a
pre-existing bug once we allowed column defaults for foreign tables.)
If OID wraparound should occur while in standalone mode (unlikely but
possible), we want to advance the counter to FirstNormalObjectId not
FirstBootstrapObjectId. Otherwise, user objects might be created with OIDs
in the system-reserved range. That isn't immediately harmful but it poses
a risk of conflicts during future pg_upgrade operations.
Noted by Andres Freund. Back-patch to all supported branches, since all of
them are supported sources for pg_upgrade operations.
In a construct like "select plain_function(set_returning_function(...))",
the plain function is applied to each output row of the SRF successively.
If some of the SRF outputs are NULL, and the plain function is strict,
you'd expect to get NULL results for such rows ... but what actually
happened was that such rows were omitted entirely from the result set.
This was due to confusion of this case with what should happen for nested
set-returning functions; a strict SRF is indeed supposed to yield an empty
set for null input. Per bug #8150 from Erwin Brandstetter.
Although this has been broken forever, we're not back-patching because
of the possibility that some apps out there expect the incorrect behavior.
This change should be listed as a possible incompatibility in the 9.3
release notes.
The existing code in NUM_numpart_from_char has hard-wired logic to treat
'.' as decimal point, even when we're using a locale-aware format string
and the locale says that '.' is the thousands separator. This results in
clearly wrong answers in FM mode (where we must be able to identify the
decimal point location), as per bug report from Patryk Kordylewski.
Since the initialization code in NUM_prepare_locale already sets up
Np->decimal as either the locale decimal-point string or "." depending
on which decimal-point format code was used, there's really no need to
have any extra logic at all in NUM_numpart_from_char: we only need to
test for a match to Np->decimal.
(Note: AFAICS there's nothing in here that explicitly checks for thousands
separators --- rather, any unmatched character is silently skipped over.
That's pretty bogus IMO but it's not the issue being complained of.)
This is a longstanding bug, but it's possible that some existing apps
are depending on '.' being recognized as decimal point even when using
a D format code. Hence, no back-patch. We should probably list this
as a potential incompatibility in the 9.3 release notes.
This case doesn't normally happen, because the planner usually clamps
all row estimates to at least one row; but I found that it can arise
when dealing with relations excluded by constraints. Without a defense,
estimate_num_groups() can return zero, which leads to divisions by zero
inside the planner as well as assertion failures in the executor.
An alternative fix would be to change set_dummy_rel_pathlist() to make
the size estimate for a dummy relation 1 row instead of 0, but that seemed
pretty ugly; and probably someday we'll want to drop the convention that
the minimum rowcount estimate is 1 row.
Back-patch to 8.4, as the problem can be demonstrated that far back.
Commit d22a09dc70 introduced official support
for GiST consistentFns that want to cache data using the FmgrInfo fn_extra
pointer: the idea was to preserve the cached values across gistrescan(),
whereas formerly they'd been leaked. However, there was an oversight in
that, namely that multiple scan keys might reference the same column's
consistentFn; the code would result in propagating the same cache value
into multiple scan keys, resulting in crashes or wrong answers. Use a
separate array instead to ensure that each scan key keeps its own state.
Per bug #8143 from Joel Roller. Back-patch to 9.2 where the bug was
introduced.
This reverts the code changes in 50c137487c,
which turned out to induce crashes and not completely fix the problem
anyway. That commit only considered single subqueries that were excluded
by constraint-exclusion logic, but actually the problem also exists for
subqueries that are appendrel members (ie part of a UNION ALL list). In
such cases we can't add a dummy subpath to the appendrel's AppendPath list
without defeating the logic that recognizes when an appendrel is completely
excluded. Instead, fix the problem by having setrefs.c scan the rangetable
an extra time looking for subqueries that didn't get into the plan tree.
(This approach depends on the 9.2 change that made set_subquery_pathlist
generate dummy paths for excluded single subqueries, so that the exclusion
behavior is the same for single subqueries and appendrel members.)
Note: it turns out that the appendrel form of the missed-permissions-checks
bug exists as far back as 8.4. However, since the practical effect of that
bug seems pretty minimal, consensus is to not attempt to fix it in the back
branches, at least not yet. Possibly we could back-port this patch once
it's gotten a reasonable amount of testing in HEAD. For the moment I'm
just going to revert the previous patch in 9.2.
If a standby server has a cascading standby server connected to it, it's
possible that WAL has already been sent up to the next WAL page boundary,
splitting a WAL record in the middle, when the first standby server is
promoted. Don't throw an assertion failure or error in walsender if that
happens.
Also, fix a variant of the same bug in pg_receivexlog: if it had already
received WAL on previous timeline up to a segment boundary, when the
upstream standby server is promoted so that the timeline switch record falls
on the previous segment, pg_receivexlog would miss the segment containing
the timeline switch. To fix that, have walsender send the position of the
timeline switch at end-of-streaming, in addition to the next timeline's ID.
It was previously assumed that the switch happened exactly where the
streaming stopped.
Note: this is an incompatible change in the streaming protocol. You might
get an error if you try to stream over timeline switches, if the client is
running 9.3beta1 and the server is more recent. It should be fine after a
reconnect, however.
Reported by Fujii Masao.
What we have implemented is a radix tree (or a radix trie or a patricia
trie), but the docs and code comments incorrectly called it a "suffix tree".
Alexander Korotkov
Previously this state was represented by whether the view's disk file had
zero or nonzero size, which is problematic for numerous reasons, since it's
breaking a fundamental assumption about heap storage. This was done to
allow unlogged matviews to revert to unpopulated status after a crash
despite our lack of any ability to update catalog entries post-crash.
However, this poses enough risk of future problems that it seems better to
not support unlogged matviews until we can find another way. Accordingly,
revert that choice as well as a number of existing kluges forced by it
in favor of creating a pg_class.relispopulated flag column.
Very old versions of msgfmt choke on these specific messages, for reasons
that are unclear at the moment. Remove them so that we can ship a beta
release and not get complaints from testers (these messages will just go
untranslated, instead, and we're hardly at 100% coverage anyway).
Peter Eisentraut will look for a better fix later.
The initial implementation of this feature was really unsupportable,
because it's relying on the physical size of an on-disk file to carry the
relation's populated/unpopulated state, which is at least a modularity
violation and could have serious long-term consequences. We could say that
an unlogged matview goes to empty on crash, but not everybody likes that
definition, so let's just remove the feature for 9.3. We can add it back
when we have a less klugy implementation.
I left the grammar and tab-completion support for CREATE UNLOGGED
MATERIALIZED VIEW in place, since it's harmless and allows delivering a
more specific error message about the unsupported feature.
I'm committing this separately to ease identification of what should be
reverted when/if we are able to re-enable the feature.
Print the command tag if we get PGRES_COMMAND_OK, and throw an error for
other cases. Per gripe from Michael Paquier.
In passing, add an fflush(), just to be real sure the output appears
before we sleep.
A view defined as "select <something> where false" had the curious property
that the system wouldn't check whether users had the privileges necessary
to select from it. More generally, permissions checks could be skipped
for tables referenced in sub-selects or views that were proven empty by
constraint exclusion (although some quick testing suggests this seldom
happens in cases of practical interest). This happened because the planner
failed to include rangetable entries for such tables in the finished plan.
This was noticed in connection with erroneous handling of materialized
views, but actually the issue is quite unrelated to matviews. Therefore,
revert commit 200ba1667b in favor of a more
direct test for the real problem.
Back-patch to 9.2 where the bug was introduced (by commit
7741dd6590).
This patch gets rid of the concept of, and infrastructure for,
non-canonical PathKeys; we now only ever create canonical pathkey lists.
The need for non-canonical pathkeys came from the desire to have
grouping_planner initialize query_pathkeys and related pathkey lists before
calling query_planner. However, since query_planner didn't actually *do*
anything with those lists before they'd been made canonical, we can get rid
of the whole mess by just not creating the lists at all until the point
where we formerly canonicalized them.
There are several ways in which we could implement that without making
query_planner itself deal with grouping/sorting features (which are
supposed to be the province of grouping_planner). I chose to add a
callback function to query_planner's API; other alternatives would have
required adding more fields to PlannerInfo, which while not bad in itself
would create an ABI break for planner-related plugins in the 9.2 release
series. This still breaks ABI for anything that calls query_planner
directly, but it seems somewhat unlikely that there are any such plugins.
I had originally conceived of this change as merely a step on the way to
fixing bug #8049 from Teun Hoogendoorn; but it turns out that this fixes
that bug all by itself, as per the added regression test. The reason is
that now get_eclass_for_sort_expr is adding the ORDER BY expression at the
end of EquivalenceClass creation not the start, and so anything that is in
a multi-member EquivalenceClass has already been created with correct
em_nullable_relids. I am suspicious that there are related scenarios in
which we still need to teach get_eclass_for_sort_expr to compute correct
nullable_relids, but am not eager to risk destabilizing either 9.2 or 9.3
to fix bugs that are only hypothetical. So for the moment, do this and
stop here.
Back-patch to 9.2 but not to earlier branches, since they don't exhibit
this bug for lack of join-clause-movement logic that depends on
em_nullable_relids being correct. (We might have to revisit that choice
if any related bugs turn up.) In 9.2, don't change the signature of
make_pathkeys_for_sortclauses nor remove canonicalize_pathkeys, so as
not to risk more plugin breakage than we have to.
Patch b19e4250b4 attempted to
preserve existing behavior regarding statistics generation in the
case that a truncation attempt was canceled due to lock conflicts.
It failed to do this accurately in two regards: (1) autovacuum had
previously generated statistics if the truncate attempt failed to
initially get the lock rather than having started the attempt, and
(2) the VACUUM ANALYZE command had always generated statistics.
Both of these changes were unintended, and are reverted by this
patch. On review, there seems to be consensus that the previous
failure to generate statistics when the truncate was terminated
was more an unfortunate consequence of how that effort was
previously terminated than a feature we want to keep; so this
patch generates statistics even when an autovacuum truncation
attempt terminates early. Another unintended change which is kept
on the basis that it is an improvement is that when a VACUUM
command is truncating, it will the new heuristic for avoiding
blocking other processes, rather than keeping an
AccessExclusiveLock on the table for however long the truncation
takes.
Per multiple reports, with some renaming per patch by Jeff Janes.
Backpatch to 9.0, where problem was created.
Previously, libpq and the backend had opposite ideas about whether
it was necessary for the client to send a CopyDone message after
receiving an ErrorResponse, making it impossible to cleanly exit
COPY BOTH mode. Fix libpq so that works correctly, adopting the
backend's notion that an ErrorResponse kills the copy in both
directions.
Adjust receivelog.c to avoid a degradation in the quality of the
resulting error messages. libpqwalreceiver.c is already doing
the right thing, so no adjustment needed there.
Add an explicit statement to the documentation explaining how
this part of the protocol is supposed to work, in the hopes of
avoiding future confusion in this area.
Since the consequences of all this confusion are very limited,
especially in the back-branches where no client ever attempts
to exit COPY BOTH mode without closing the connection entirely,
no back-patch.
Isolate checksum calculation to its own module, so that bufpage
knows little if anything about the details of the calculation.
This implementation is a modified FNV-1a hash checksum, details
of which are given in the new checksum.c header comments.
Basic implementation only, so we fix the output value.
Later related commits will add version numbers to pg_control,
compiler optimization flags and memory barriers.
Ants Aasma, reviewed by Jeff Davis and Simon Riggs
Choose a saner ordering of parameters (adding a new input param after
the output params seemed a bit random), update the function's header
comment to match reality (cmon folks, is this really that hard?),
get rid of useless and sloppily-defined distinction between
PROCESS_UTILITY_SUBCOMMAND and PROCESS_UTILITY_GENERATED.
We mustn't run any of the event-trigger support code when handling
utility statements like START TRANSACTION or ABORT, because that code
may need to refresh event-trigger cache data, which requires being
inside a valid transaction. (This mistake explains the consistent
build failures exhibited by the CLOBBER_CACHE_ALWAYS buildfarm members,
as well as some irreproducible failures on other members.)
The least messy fix seems to be to break standard_ProcessUtility into two
functions, one that handles all the statements not supported by event
triggers, and one that contains the event-trigger support code and handles
the statements that are supported by event triggers.
This change also fixes several inconsistencies, such as four cases where
support had been installed for "ddl_event_start" but not "ddl_event_end"
triggers, plus the fact that InvokeDDLCommandEventTriggersIfSupported()
paid no mind to isCompleteQuery.
Dimitri Fontaine and Tom Lane
Move checking for unscannable matviews into ExecOpenScanRelation, which is
a better place for it first because the open relation is already available
(saving a relcache lookup cycle), and second because this eliminates the
problem of telling the difference between rangetable entries that will or
will not be scanned by the query. In particular we can get rid of the
not-terribly-well-thought-out-or-implemented isResultRel field that the
initial matviews patch added to RangeTblEntry.
Also get rid of entirely unnecessary scannability check in the rewriter,
and a bogus decision about whether RefreshMatViewStmt requires a parse-time
snapshot.
catversion bump due to removal of a RangeTblEntry field, which changes
stored rules.
ORDER BY expressions were being treated the same as regular aggregate
arguments for purposes of collation determination, but really they should
not affect the aggregate's collation at all; only collations of the
aggregate's regular arguments should affect it.
In many cases this mistake would lead to incorrectly throwing a "collation
conflict" error; but in some cases the corrected code will silently assign
a different collation to the aggregate than before, for example
agg(foo ORDER BY bar COLLATE "x")
which will now use foo's collation rather than "x" for the aggregate.
Given this risk and the lack of field complaints about the issue, it
doesn't seem prudent to back-patch.
In passing, rearrange code in assign_collations_walker so that we don't
need multiple copies of the standard logic for computing collation of a
node with children. (Previously, CaseExpr duplicated the standard logic,
and we would have needed a third copy for Aggref without this change.)
Andrew Gierth and David Fetter
There's probably no real bug here at present, so not backpatching.
But it seems good to make these bits consistent with the rest of
libpq, so as to avoid future surprises.
Patch by me. Review by Tom Lane.
There was a high probability of two or more concurrent C.I.C. commands
deadlocking just before completion, because each would wait for the others
to release their reference snapshots. Fix by releasing the snapshot
before waiting for other snapshots to go away.
Per report from Paul Hinze. Back-patch to all active branches.
On non-Windows systems, sys/time.h was pulled in by portability/instr_time.h,
which pulled in time.h. We certainly should include time.h directly, since
we're using time(2), but the indirect include masked the problem on most
platforms.
Andres Freund
This was due to incomplete implementation of rowcount reporting
for RMV, which was due to initial waffling on whether it should
be provided. It seems unlikely to be a useful or universally
available number as more sophisticated techniques for maintaining
matviews are added, so remove the partial support rather than
completing it.
Per report of Jeevan Chalke, but with a different fix
When creating or manipulating a cached plan for a transaction control
command (particularly ROLLBACK), we must not perform any catalog accesses,
since we might be in an aborted transaction. However, plancache.c busily
saved or examined the search_path for every cached plan. If we were
unlucky enough to do this at a moment where the path's expansion into
schema OIDs wasn't already cached, we'd do some catalog accesses; and with
some more bad luck such as an ill-timed signal arrival, that could lead to
crashes or Assert failures, as exhibited in bug #8095 from Nachiket Vaidya.
Fortunately, there's no real need to consider the search path for such
commands, so we can just skip the relevant steps when the subject statement
is a TransactionStmt. This is somewhat related to bug #5269, though the
failure happens during initial cached-plan creation rather than
revalidation.
This bug has been there since the plan cache was invented, so back-patch
to all supported branches.
In most cases, these were just references to the SQL standard in
general. In a few cases, a contrast was made between SQL92 and later
standards -- those have been kept unchanged.
If an FDW fails to take special measures with a CurrentOfExpr, we will
end up trying to execute it as an ordinary qual, which was being treated
as a purely internal failure condition. Provide a more user-oriented
error message for such cases.
This saves some memory from each index relcache entry. At least on a 64-bit
machine, it saves just enough to shrink a typical relcache entry's memory
usage from 2k to 1k. That's nice if you have a lot of backends and a lot of
indexes.
This changes the behavior of the start and stop actions to exit
successfully if the server was already started or stopped.
This changes the default behavior of the start action: Before, if the
server was already running, it would print a message and succeed. Now,
that situation will result in an error. When running in idempotent
mode, no message is printed and pg_ctl exits successfully.
It was considered to just make the idempotent behavior the default and
only option, but pg_upgrade needs the old behavior.
The build of .pc (pkg-config) files depends on all makefiles in use, and
in dependency tracking mode, the previous coding ended up including
/dev/null as a makefile. Apparently, on some platforms the modification
time of /dev/null changes sporadically, and so the .pc files would end
up being rebuilt every so often. Fix that by changing the makefile code
to do without using /dev/null.
Revert the matview-related changes in explain.c's API, as per recent
complaint from Robert Haas. The reason for these appears to have been
principally some ill-considered choices around having intorel_startup do
what ought to be parse-time checking, plus a poor arrangement for passing
it the view parsetree it needs to store into pg_rewrite when creating a
materialized view. Do the latter by having parse analysis stick a copy
into the IntoClause, instead of doing it at runtime. (On the whole,
I seriously question the choice to represent CREATE MATERIALIZED VIEW as a
variant of SELECT INTO/CREATE TABLE AS, because that means injecting even
more complexity into what was already a horrid legacy kluge. However,
I didn't go so far as to rethink that choice ... yet.)
I also moved several error checks into matview parse analysis, and
made the check for external Params in a matview more accurate.
In passing, clean things up a bit more around interpretOidsOption(),
and fix things so that we can use that to force no-oids for views,
sequences, etc, thereby eliminating the need to cons up "oids = false"
options when creating them.
catversion bump due to change in IntoClause. (I wonder though if we
really need readfuncs/outfuncs support for IntoClause anymore.)