adjust_appendrel_attrs can't transfer nullingrel labeling to a non-Var
translation expression (mainly because it's too late to wrap such an
expression in a PlaceHolderVar). I'd supposed in commit 2489d76c4
that that restriction was unreachable because we'd not attempt to push
problematic clauses down to an appendrel child relation. I forgot that
set_append_rel_size blindly converts all the parent rel's joininfo
clauses to child clauses, and that list could well contain clauses
from above a nulling outer join.
We might eventually have to devise a direct fix for this implementation
restriction, but for now it seems enough to filter out troublesome
clauses while constructing the child's joininfo list. Such clauses
are certainly not useful while constructing paths for the child rel;
they'll have to be applied later when we join the completed appendrel
to something else. So we don't need them here, and omitting them from
the list should save a few cycles while processing the child rel.
Per bug #17832 from Marko Tiikkaja.
Discussion: https://postgr.es/m/17832-d0a8106cdf1b722e@postgresql.org
This was an omission in the original creation of the module.
Also slightly adjust some wording to avoid a double "is".
Backpatch the non-meson piece of this to release 12, where the module
was introduced.
Discussion: https://postgr.es/m/be869e1c-8e3f-4cde-8609-212c899cccf9@dunslane.net
Freezing the relation N times and fetching the tuples one-by-one isn't that
cheap. On my machine this reduces test times by a bit less than one second, on
windows CI it's a few seconds.
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20230309001558.b7shzvio645ebdta@awork3.anarazel.de
64bit xids can't represent xids before epoch 0 (see also be504a3e97). When
FullTransactionIdFromXidAndCtx() was passed such an xid, it'd create a 64bit
xid far into the future. Noticed while adding assertions in the course of
investigating be504a3e97, as amcheck's test create such xids.
To fix the issue, just return FirstNormalFullTransactionId in this case. A
freshly initdb'd cluster already has a newer horizon. The most minimal version
of this would make the messages for some detected corruptions differently
inaccurate. To make those cases accurate, switch
FullTransactionIdFromXidAndCtx() to use the 32bit modulo difference between
xid and nextxid to compute the 64bit xid, yielding sensible "in the future" /
"in the past" answers.
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20230108002923.cyoser3ttmt63bfn@awork3.anarazel.de
Backpatch: 14-, where heapam verification was introduced
The initialization order in update_cached_xid_range() was wrong, calling
FullTransactionIdFromXidAndCtx() before setting
->next_xid. FullTransactionIdFromXidAndCtx() uses ->next_xid.
In most situations this will not cause visible issues, because the next call
to update_cached_xid_range() will use a less wrong ->next_xid. It's rare that
xids advance fast enough for this to be a problem.
Found while adding more asserts to the 64bit xid infrastructure.
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20230108002923.cyoser3ttmt63bfn@awork3.anarazel.de
Backpatch: 14-, where heapam verification was introduced
The ossp-uuid pkg-config file includes the necessary -I to include the header
as uuid.h. Previously this would only work if ossp-uuid has its headers in
ossp/ in an already searched path.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/7bb8b8a5-5297-ab3c-3412-466fd0124d00@dunslane.net
If the regex compiler can see that a regex is unsatisfiable
(for example, '$foo') then it may emit an NFA having no arcs.
pg_trgm's packGraph function did the wrong thing in this case;
it would access off the end of a work array, and with bad luck
could produce a corrupted output data structure causing more
problems later. This could end with wrong answers or crashes
in queries using a pg_trgm GIN or GiST index with such a regex.
Fix by not trying to de-duplicate if there aren't at least 2 arcs.
Per bug #17830 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17830-57ff5f89bdb02b09@postgresql.org
The COPY documentation is quite clear that "COPY relation TO" copies
rows from only the named table, not any inheritance children it may
have. However, if you enabled row-level security on the table then
this stopped being true, because the code forgot to apply the ONLY
modifier in the "SELECT ... FROM relation" query that it constructs
in order to allow RLS predicates to be attached. Fix that.
Report and patch by Antonin Houska (comment adjustments and test case
by me). Back-patch to all supported branches.
Discussion: https://postgr.es/m/3472.1675251957@antos
Previously, the default encoding was derived from the locale when
using libc; while the default was always UTF-8 when using ICU. That
would throw an error when the locale was not compatible with UTF-8.
This commit causes initdb to derive the default encoding from the
locale for both providers. If --no-locale is specified (or if the
locale is C or POSIX), the default encoding will be UTF-8 for ICU
(because ICU does not support SQL_ASCII) and SQL_ASCII for libc.
Per buildfarm failure on system "hoverfly" related to commit
27b62377b4.
Discussion: https://postgr.es/m/d191d5841347301a8f1238f609471ddd957fc47e.camel%40j-davis.com
This commit reworks pg_get_wal_fpi_info() to become aware of all the
block information that can be attached to a record rather than just its
full-page writes:
- Addition of the block id as assigned by XLogRegisterBuffer(),
XLogRegisterBlock() or XLogRegisterBufData().
- Addition of the block data, as bytea, or NULL if none. The length of
the block data can be guessed with length(), so there is no need to
store its length in a separate field.
- Addition of the full-page image length, as counted without a hole or
even compressed.
- Modification of the handling of the full-page image data. This is
still a bytea, but it could become NULL if none is assigned to a block.
- Addition of the full-page image flags, tracking if a page is stored
with a hole, if it needs to be applied and the type of compression
applied to it, as of all the BKPIMAGE_* values in xlogrecord.h.
The information of each block is returned as one single record, with the
record's ReadRecPtr included to be able to join the block information
with the existing pg_get_wal_records_info(). Note that it is perfectly
possible for a block to hold both data and full-page image.
Thanks also to Kyotaro Horiguchi and Matthias van de Meent for the
discussion.
This commit uses some of the work proposed by Melanie, though it has
been largely redesigned and rewritten by me. Bharath has helped in
refining a bit the whole.
Reported-by: Melanie Plageman
Author: Michael Paquier, Melanie Plageman, Bharath Rupireddy
Discussion: https://postgr.es/m/CAAKRu_bORebdZmcV8V4cZBzU8M_C6tDDdbiPhCZ6i-iuSXW9TA@mail.gmail.com
Datetime input formerly accepted combinations such as
'1995-08-06 infinity', but this seems like a clear error.
Reject any combination of regular y/m/d/h/m/s fields with
these special tokens.
Joseph Koshakow, reviewed by Keisuke Kuroda and myself
Discussion: https://postgr.es/m/CAAvxfHdm8wwXwG_FFRaJ1nTHiMWb7YXS2YKCzCt8Q0a2ZoMcHg@mail.gmail.com
Previously, pg_upgrade checked that the old and new clusters were
compatible, including the locale and encoding. But the new cluster was
just created, and only template0 from the new cluster will be
preserved (template1 and postgres are both recreated during the
upgrade process).
Because template0 is not sensitive to locale or encoding, just update
the pg_database entry to be the same as template0 from the original
cluster.
This commit makes it easier to change the default initdb locale or
encoding settings without causing needless incompatibilities.
Discussion: https://postgr.es/m/d62b2874-729b-d26a-2d0a-0d64f509eca4@enterprisedb.com
Reviewed-by: Peter Eisentraut
In our Kerberos test suite, there isn't much need to worry about the
normal canonicalization that Kerberos provides by looking up the reverse
DNS for the IP address connected to, and in some cases it can actively
cause problems (eg: a captive portal wifi where the normally not
resolvable localhost address used ends up being resolved anyway, and
not to the domain we are using for testing, causing the entire
regression test to fail with errors about not being able to get a TGT
for the remote realm for cross-realm trust).
Therefore, disable it by adding rdns = false into the krb5.conf that's
generated for the test.
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/Y/QD2zDkDYQA1GQt@tamriel.snowman.net
Change comments for pg_cryptohash_init(), pg_cryptohash_update(),
pg_cryptohash_final() in cryptohash.c to match cryptohash_openssl.c.
In particular, the claim that these functions were "designed" to never
fail was incorrect, since by design callers need to be prepared to
handle failures, for compatibility with the cryptohash_openssl.c
versions.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/301F4EDD-27B9-460F-B462-B9DB2BDE4ACF@yesql.se
A patch sent by Jacob Champion has been touching this area of the code,
and the set of changes done in a9e9a9f has made a run of pgindent on
these files a bit annoying to handle. So let's clean up a bit the area,
first, to ease the work on follow-up patches.
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
Commit bdaabb9b started skipping doomed transactions when building the
list of possible conflicts for SERIALIZABLE READ ONLY. That makes
sense, because doomed transactions won't commit, but a couple of subtle
things broke:
1. If all uncommitted r/w transactions are doomed, a READ ONLY
transaction would arbitrarily not benefit from the safe snapshot
optimization. It would not be taken immediately, and yet no other
transaction would set SXACT_FLAG_RO_SAFE later.
2. In the same circumstances but with DEFERRABLE, GetSafeSnapshot()
would correctly exit its wait loop without sleeping and then take the
optimization in non-assert builds, but assert builds would fail a sanity
check that SXACT_FLAG_RO_SAFE had been set by another transaction.
This is similar to the case for PredXact->WritableSxactCount == 0. We
should opt out immediately if our possibleUnsafeConflicts list is empty
after filtering.
The code to maintain the serializable global xmin is moved down below
the new opt out site, because otherwise we'd have to reverse its effects
before returning.
Back-patch to all supported releases. Bug #17368.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17116-d6ca217acc180e30%40postgresql.org
Discussion: https://postgr.es/m/20110707212159.GF76634%40csail.mit.edu
396d348b0 omitted adding with_icu to the pg_dump tests under
meson. Conversely, e6927270c exported ZSTD for pg_basebackup's tests, despite
pg_basebackup's ZSTD support not having any tests.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230226225239.GL1653@telsasoft.com
The changes in b6a0d469ca prevented installation of the test files during a
normal install. However, the buildfarm intentionally tries to trun the tests
against a "real" installation. The new install-test-files target provides that
ability.
Because we want to install into a normal directory, I removed the necessary
munging of the target paths from meson.build and moved it into
install-test-files. I also added DESTDIR support, so that installing can
redirect the directory if desired. That's used for the tmp_install/
installation now.
I didn't like the number of arguments necessary for install_test_files, so I
changed it to use
--install target list of files
which makes it easier to use for further directories, if/when we need them.
Discussion: https://postgr.es/m/20230308012940.edexipb3vqylcu6r@awork3.anarazel.de
This exposes the ICU facility to add custom collation rules to a
standard collation.
New options are added to CREATE COLLATION, CREATE DATABASE, createdb,
and initdb to set the rules.
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Discussion: https://www.postgresql.org/message-id/flat/821c71a4-6ef0-d366-9acf-bb8e367f739f@enterprisedb.com
Reformat some of the comments in MergeAttributes(). A lot of code has
been added here over time, and the comments could use a bit of editing
to make the code flow read better.
One file per line seems best. We already did this in some cases.
This adopts the same format everywhere (except in some cases where the
list reasonably fits on one line).
There was apparently an attempt here to list all the object types that
ACL_USAGE applies to, but it wasn't complete. So instead of trying to
keep up, put in a more timeless comment.
Applying normalization changes how the following query strings are
reflected in pg_stat_statements, by showing Const nodes with a
dollar-signed parameter as this is how such queries are structured
internally once parsed:
- DECLARE
- EXPLAIN
- CREATE MATERIALIZED VIEW
- CREATE TABLE AS
More normalization could be done in the future depending on the parts
where query jumbling is applied (like A_Const nodes?), the changes being
reflected in the regression tests in majority created in de2aca2. This
just allows the basics to work for utility queries using Const nodes.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
When vacuum_defer_cleanup_age is bigger than the current xid, including the
epoch, the subtraction of vacuum_defer_cleanup_age would lead to a wrapped
around xid. While that normally is not a problem, the subsequent conversion to
a 64bit xid results in a 64bit-xid very far into the future. As that xid is
used as a horizon to detect whether rows versions are old enough to be
removed, that allows removal of rows that are still visible (i.e. corruption).
If vacuum_defer_cleanup_age was never changed from the default, there is no
chance of this bug occurring.
This bug was introduced in dc7420c2c9. A lesser version of it exists in
12-13, introduced by fb5344c969, affecting only GiST.
The 12-13 version of the issue can, in rare cases, lead to pages in a gist
index getting recycled too early, potentially causing index entries to be
found multiple times.
The fix is fairly simple - don't allow vacuum_defer_cleanup_age to retreat
further than FirstNormalTransactionId.
Patches to make similar bugs easier to find, by adding asserts to the 64bit
xid infrastructure, have been proposed, but are not suitable for backpatching.
Currently there are no tests for vacuum_defer_cleanup_age. A patch introducing
infrastructure to make writing a test easier has been posted to the list.
Reported-by: Michail Nikolaev <michail.nikolaev@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230108002923.cyoser3ttmt63bfn@awork3.anarazel.de
Backpatch: 12-, but impact/fix is smaller for 12-13
Previously, all the nodes of CallStmt were included in the jumbling,
causing a duplicate in the computation as the transformed state of the
CALL query was included as well as the parsed state (transformed
FuncCall with all the input arguments and potential output arguments).
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
We already didn't use touch (some earlier version of the meson build did ),
and cp is only used for updating unicode files. The latter already depends on
the optional availability of 'wget', so doing the same for 'cp' makes sense.
Eventually we probably want a portable command for updating source code as
part of a target, but for now...
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/70e96c34-64ee-e549-8c4a-f91a7a668804@dunslane.net
IntoClause.viewQuery is a copy of the parsed-but-not-rewritten SELECT
clause copied to IntoClause when transforming CreateTableAsStmt for a
materialized view. Including a second copy of the SELECT Query into the
query jumbling was leading to an incorrect numbering of the Const node
locations, as these would be counted twice instead of once.
This becomes visible once the query normalization is applied to CREATE
MATERIALIZED VIEW in pg_stat_statements in the shape of a query string
using only odd numbers for the normalized constants, (regression tests
added in pg_stat_statements as of de2aca2 would show the difference).
Including the original Query from CreateTableAsStmt is enough for the
query jumbling.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
4211fbd has been handling PROCESS_MAIN in vacuum_rel() with an "if/else
if" structure to avoid an extra level of indentation, but this has been
found as being rather parse to read. This commit updates the code so as
we check for PROCESS_MAIN in a single place and then handle its
subpaths, FULL or non-FULL vacuums. Some comments are added to make
that clearer for the reader.
Reported-by: Melanie Plageman
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Melanie Plageman
Discussion: https://postgr.es/m/20230306194009.5cn6sp3wjotd36nu@liskov
If a view is defined atop another view, and then CREATE OR REPLACE
VIEW is used to add columns to the lower view, then when the upper
view's referencing RTE is expanded by ApplyRetrieveRule we will have
a subquery RTE with fewer eref->colnames than output columns. This
confuses various code that assumes those lists are always in sync,
as they are in plain parser output.
We have seen such problems before (cf commit d5b760ecb), and now
I think the time has come to do what was speculated about in that
commit: let's make ApplyRetrieveRule synthesize some column names to
preserve the invariant that holds in parser output. Otherwise we'll
be chasing this class of bugs indefinitely. Moreover, it appears from
testing that this actually gives us better results in the test case
d5b760ecb added, and likely in other corner cases that we lack
coverage for.
In HEAD, I replaced d5b760ecb's hack to make expandRTE exit early with
an elog(ERROR) call, since the case is now presumably unreachable.
But it seems like changing that in back branches would bring more risk
than benefit, so there I just updated the comment.
Per bug #17811 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17811-d31686b78f0dffc9@postgresql.org
This routine is able to retrieve the OID of the schema used with an
extension (pg_extension.extnamespace), or InvalidOid if this information
is not available. plpgsql_check embeds a copy of this code when
performing checks on functions, as one out-of-core example.
Author: Pavel Stehule
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAFj8pRD+9x55hjDoi285jCcjPc8uuY_D+FLn5RpXggdz+4O2sQ@mail.gmail.com
As shaped, two DROP ROLE queries included in "user_activity" were
showing in the reports for "wal". The intention is to keep each test
isolated and independent, so this is incorrect. This commit adds some
calls to pg_stat_statements_reset() to clean up the statistics once each
test finishes, so as there are no risks of overlap in the reports for
individial scenarios.
The addition in "user_activity" fixes the output of "wal". The new
resets done in "level_tracking" and "utility" are added for consistency
with the rest, though they do not affect the stats generated in the
other tests.
Oversight in d0028e3.
Reported-by: Andrei Zubkov
Discussion: https://postgr.es/m/7beb722dd016bf54f1c78bfd6d44a684e28da624.camel@moonset.ru