Commit b4af70cb inverted the return value of the function
parallel_processing_is_safe(), but missed the amvacuumcleanup test.
Index AMs that don't support parallel cleanup at all were affected.
The practical consequences of this bug were not very serious. Hash
indexes are affected, but since they just return the number of blocks
during hashvacuumcleanup anyway, it can't have had much impact.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA-Em+aeVPmBbL_s1V-ghsJQSxYL-i3JP8nTfPiD1wjKw@mail.gmail.com
Backpatch: 14-, where commit b4af70cb appears.
Commit b4af70cb, which simplified state managed by VACUUM, performed
refactoring of parallel VACUUM in passing. Confusion about the exact
details of the tasks that the leader process is responsible for led to
code that made it possible for parallel VACUUM to miss a subset of the
table's indexes entirely. Specifically, indexes that fell under the
min_parallel_index_scan_size size cutoff were missed. These indexes are
supposed to be vacuumed by the leader (alongside any parallel unsafe
indexes), but weren't vacuumed at all. Affected indexes could easily
end up with duplicate heap TIDs, once heap TIDs were recycled for new
heap tuples. This had generic symptoms that might be seen with almost
any index corruption involving structural inconsistencies between an
index and its table.
To fix, make sure that the parallel VACUUM leader process performs any
required index vacuuming for indexes that happen to be below the size
cutoff. Also document the design of parallel VACUUM with these
below-size-cutoff indexes.
It's unclear how many users might be affected by this bug. There had to
be at least three indexes on the table to hit the bug: a smaller index,
plus at least two additional indexes that themselves exceed the size
cutoff. Cases with just one additional index would not run into
trouble, since the parallel VACUUM cost model requires two
larger-than-cutoff indexes on the table to apply any parallel
processing. Note also that autovacuum was not affected, since it never
uses parallel processing.
Test case based on tests from a larger patch to test parallel VACUUM by
Masahiko Sawada.
Many thanks to Kamigishi Rei for her invaluable help with tracking this
problem down.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Kamigishi Rei <iijima.yun@koumakan.jp>
Reported-By: Andrew Gierth <andrew@tao11.riddles.org.uk>
Diagnosed-By: Andres Freund <andres@anarazel.de>
Bug: #17245
Discussion: https://postgr.es/m/17245-ddf06aaf85735f36@postgresql.org
Discussion: https://postgr.es/m/20211030023740.qbnsl2xaoh2grq3d@alap3.anarazel.de
Backpatch: 14-, where the refactoring commit appears.
Commit d168b66682, which overhauled index deletion, added a
pg_unreachable() to the end of a sort comparator used when sorting heap
TIDs from an index page. This allows the compiler to apply
optimizations that assume that the heap TIDs from the index AM must
always be unique.
That doesn't seem like a good idea now, given recent reports of
corruption involving duplicate TIDs in indexes on Postgres 14. Demote
to an assertion, just in case.
Backpatch: 14-, where index deletion was overhauled.
Remove obsolete reference to lazy_vacuum()'s onecall argument. The
function argument was removed by commit 3499df0dee.
Also remove adjoining comment block that introduces the wraparound
failsafe concept. Talking about the failsafe here no longer makes
sense, since lazy_vacuum() (and related functions) are no longer the
only place where the failsafe might be triggered. This has been the
case since commit c242baa4a8 taught VACUUM to consider triggering the
failsafe mechanism during its initial heap scan.
Checking that an offset number isn't past the end of a heap page's line
pointer array was just a defensive sanity check for HOT-chain traversal
code before commit 3c3b8a4b. It's etrictly necessary now, though. Add
comments that reference the issue to code in heapam that needs to get it
right.
Per suggestion from Alexander Lakhin.
Discussion: https://postgr.es/m/f76a292c-9170-1aef-91a0-59d9443b99a3@gmail.com
A broken HOT chain is not an unexpected condition, even when the offset
number points past the end of the page's line pointer array.
heap_prune_chain() does not (and never has) treated this condition as
unexpected, so derivative code in heap_index_delete_tuples() shouldn't
do so either.
Oversight in commit 4228817449.
The assertion can probably only fail on Postgres 14 and master. Earlier
releases don't have commit 3c3b8a4b, which taught VACUUM to truncate the
line pointer array of heap pages. Backpatch all the same, just to be
consistent.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17197-9438f31f46705182@postgresql.org
Backpatch: 12-, just like commit 4228817449.
All the code paths simplified here were already using a boolean or used
an expression that led to zero or one, making the extra bits
unnecessary.
Author: Justin Pryzby
Reviewed-by: Tom Lane, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/20210428182936.GE27406@telsasoft.com
It doesn't make any sense to report this information, since VACUUM
VERBOSE reports on heap relation truncation directly. This was an
oversight in commit 7ab96cf6, which made VACUUM VERBOSE output a little
more consistent with nearby autovacuum-specific log output. Adjust
comments that describe how this is supposed to work in passing.
Also bring truncation-related VACUUM VERBOSE output in line with the
convention established for VACUUM VERBOSE output by commit f4f4a649.
Author: Peter Geoghegan <pg@bowt.ie>
Backpatch: 14-, where VACUUM VERBOSE's output changed.
The field hasn't been used since commit 3d351d91, which redefined
pg_class.reltuples to be -1 before the first VACUUM or ANALYZE.
Also rename a local variable of the same name ("old_rel_pages"). This is
used by relation truncation to represent the original relation size at
the start of the ongoing VACUUM operation. Rename it to orig_rel_pages,
since that's a lot clearer. (This name matches similar nearby code.)
Most data-corruption reports mention the location of the problem, but
this one failed to. Add it.
Backpatch all the way back. In 12 and older, also assign the
ERRCODE_DATA_CORRUPTED error code as was done in commit fd6ec93bf8 for
13 and later.
Discussion: https://postgr.es/m/202108191637.oqyzrdtnheir@alvherre.pgsql
Adjust track_io_timing related logging code added by commit 94d13d474d.
Make it consistent with other nearby autovacuum and autoanalyze logging
code by removing logic that suppressed zero millisecond outputs.
log_autovacuum_min_duration log output now reliably shows "read:" and
"write:" millisecond-based values in its report (when track_io_timing is
enabled).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Stephen Frost <sfrost@snowman.net>
Discussion: https://postgr.es/m/CAH2-WznW0FNxSVQMSRazAMYNfZ6DR_gr5WE78hc6E1CBkkJpzw@mail.gmail.com
Backpatch: 14-, where the track_io_timing logging was introduced.
This order seems more natural. It starts with details that are
particular to heap and index data structures, and ends with system-level
costs incurred during the autovacuum worker's VACUUM/ANALYZE operation.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkzxK6ahA9xxsOftRtBX_R0swuHZsvo4QUbak1Bz7hb7Q@mail.gmail.com
Backpatch: 14-, which enhanced the log output in various ways.
This was arguably a minor oversight in commit b4af70cb, which cleaned up
the function signatures of functions that modify IndexBulkDeleteResult
variables.
During a VACUUM or CLUSTER command, the initial output emits a
fully qualified relation path with namespace. The post-action
errmsg only emitted the relation name however, which may lead
to hard to parse output when using multiple jobs with vacuumdb
as the output from different jobs may be interleaved. Include
the full path in the post-action errmsg to be consistent with
the initial errmsg.
Author: Mike Fiedler <miketheman@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CAMerE0oz+8G-aORZL_BJcPxnBqewZAvND4bSUysjz+r-oT1BxQ@mail.gmail.com
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
This has the advantage to make a process more responsive when the
postmaster dies, even if the wait time was rather limited as there was
only a 50ms timeout here. Another advantage of this change is for
monitoring, as we gain a new wait event for the end-of-vacuum
truncation.
Author: Bharath Rupireddy
Reviewed-by: Aleksander Alekseev, Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACU4AdPCq6NLfcA-ZGwX7pPCK5FgEj-CAU0xCKzkASSy_A@mail.gmail.com
The failsafe can trigger when index processing is already disabled.
This can happen when VACUUM's INDEX_CLEANUP parameter is "off" and the
failsafe happens to trigger. Remove assertions that assume that index
processing is directly tied to the failsafe.
Oversight in commit c242baa4, which made it possible for the failsafe to
trigger in a two-pass strategy VACUUM that has yet to make its first
call to lazy_vacuum_all_indexes().
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
Bugfix commit 5fc89376 effectively made the lock_waiter_detected field
from vacuumlazy.c's global state struct into private state owned by
lazy_truncate_heap(). Finish this off by replacing the struct field
with a local variable.
The extra checks added by the recompression of toast data introduced in
bbe0a81 is proving to have a performance impact on VACUUM or CLUSTER
even if no recompression is done. This is more noticeable with more
toastable columns that contain non-NULL values.
Improvements could be done to make those extra checks less expensive,
but that's not material for 14 at this stage, and we are not sure either
if the code path of VACUUM FULL/CLUSTER is adapted for this job.
Per discussion with several people, including Andres Freund, Robert
Haas, Álvaro Herrera, Tom Lane and myself.
Discussion: https://postgr.es/m/20210527003144.xxqppojoiwurc2iz@alap3.anarazel.de
Fix a few places that were using appendStringInfo() when they should have
been using appendStringInfoString(). Also some cases of
appendPQExpBuffer() that would have been better suited to use
appendPQExpBufferChar(), and finally, some places that used
appendPQExpBuffer() when appendPQExpBufferStr() would have suited better.
There are no bugs are being fixed here. The aim is just to make the code
use the most optimal function for the job.
All the code being changed here is new to PG14. It makes sense to fix
these before we branch for PG15. There are a few other places that we
could fix, but those cases are older code so fixing those seems less
worthwhile as it may cause unnecessary back-patching pain in the future.
Author: Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716732158B1C4142C6FE375943D9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
VACUUM FULL and CLUSTER can be used to enforce the use of the existing
compression method of a toastable column if a value currently stored is
compressed with a method that does not match the column's defined
method. The code in charge of decompressing and recompressing toast
values at rewrite left around the detoasted values, causing an
accumulation of memory allocated in TopTransactionContext.
When processing large relations, this could cause the system to run out
of memory. The detoasted values are not needed once their tuple is
rewritten, and this commit ensures that the necessary cleanup happens.
Issue introduced by bbe0a81d. The comments of the area are reordered a
bit while on it.
Reported-by: Andres Freund
Analyzed-by: Andres Freund
Author: Michael Paquier
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/20210521211929.pcehg6f23icwstdb@alap3.anarazel.de
The wraparound failsafe mechanism added by commit 1e55e7d1 handled the
one-pass strategy case (i.e. the "table has no indexes" case) by adding
a dedicated failsafe check. This made up for the fact that the usual
one-pass checks inside lazy_vacuum_all_indexes() cannot ever be reached
during a one-pass strategy VACUUM.
This approach failed to account for two-pass VACUUMs that opt out of
index vacuuming up-front. The INDEX_CLEANUP off case in the only case
that works like that.
Fix this by performing a failsafe check every 4GB during the first scan
of the heap, regardless of the details of the VACUUM. This eliminates
the special case, and will make the failsafe trigger more reliably.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20210424002921.pb3t7h6frupdqnkp@alap3.anarazel.de
The percentage of blocks from the table value reported by autovacuum log
output (following commit 5100010ee4) should never exceed 100% because
it describes the state of the table back when lazy_vacuum() was called.
The value could nevertheless exceed 100% in the event of heap relation
truncation. We failed to compensate for how truncation affects
rel_pages.
Fix the faulty accounting by using the original rel_pages value instead
of the current/final rel_pages value.
Reported-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210423204306.5osfpkt2ggaedyvy@alap3.anarazel.de
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
Previously long was used as the data type for some counters in BufferUsage
and WalUsage. But long is only four byte, e.g., on Windows, and it's entirely
possible to wrap a four byte counter. For example, emitting more than
four billion WAL records in one transaction isn't actually particularly rare.
To avoid the overflows of those counters, this commit changes the data type
of them from long to int64.
Suggested-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20201221211650.k7b53tcnadrciqjo@alap3.anarazel.de
Discussion: https://postgr.es/m/af0964ac-7080-1984-dc23-513754987716@oss.nttdata.com
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
The all_visible_according_to_vm variable's value is inherently prone to
becoming invalidated concurrently, since it is set before we even
acquire a lock on a related heap page buffer.
Oversight in commit 7136bf34, which added the assertion in passing.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Tang <tanghy.fnst@fujitsu.com>
Diagnosed-By:: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDzgc8_MYrA5m1fyydomw_eVKtQiYh7sfDK4KEhdMsf_g@mail.gmail.com
Document VACUUM's soft assumption that any LP_DEAD items encountered
during pruning will become LP_UNUSED items before VACUUM finishes up.
This is integral to the accounting used by VACUUM to generate its final
report on the table to the stats collector. It also affects how VACUUM
determines which heap pages are truncatable. In both cases VACUUM is
concerned with the likely contents of the page in the near future, not
the current contents of the page.
This state of affairs created the false impression that VACUUM's dead
tuple accounting had significant difference with similar accounting used
during ANALYZE. There were and are no substantive differences, at least
when the soft assumption completely works out. This is far clearer now.
Also document cases where things don't quite work out for VACUUM's dead
tuple accounting. It's possible that a significant number of LP_DEAD
items will be left behind by VACUUM, and won't be recorded as remaining
dead tuples in VACUUM's statistics collector report. This behavior
dates back to commit a96c41fe, which taught VACUUM to run without index
and heap vacuuming at the user's request. The failsafe mechanism added
to VACUUM more recently by commit 1e55e7d1 takes the same approach to
dead tuple accounting.
Reported-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=Jmtu18PrsYq3EvvZJGOmZqSO2u3bvKpx9xJa5uhNp=Q@mail.gmail.com
It seems like a good idea to bypass heap truncation when the wraparound
failsafe mechanism (which was added in commit 1e55e7d1) is in effect.
Deliberately don't bypass heap truncation in the INDEX_CLEANUP=off case,
even though it is similar to the failsafe case. There is already a
separate reloption (and related VACUUM parameter) for that.
Reported-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDWRh6oTN5T8wa+cpZUVpHXET8BJ8Da7WHVHpwkPP6KLg@mail.gmail.com
heap_update needs to clear any existing "all visible" flag on
the old tuple's page (and on the new page too, if different).
Per coding rules, to do this it must acquire pin on the appropriate
visibility-map page while not holding exclusive buffer lock;
which creates a race condition since someone else could set the
flag whenever we're not holding the buffer lock. The code is
supposed to handle that by re-checking the flag after acquiring
buffer lock and retrying if it became set. However, one code
path through heap_update itself, as well as one in its subroutine
RelationGetBufferForTuple, failed to do this. The end result,
in the unlikely event that a concurrent VACUUM did set the flag
while we're transiently not holding lock, is a non-recurring
"PANIC: wrong buffer passed to visibilitymap_clear" failure.
This has been seen a few times in the buildfarm since recent VACUUM
changes that added code paths that could set the all-visible flag
while holding only exclusive buffer lock. Previously, the flag
was (usually?) set only after doing LockBufferForCleanup, which
would insist on buffer pin count zero, thus preventing the flag
from becoming set partway through heap_update. However, it's
clear that it's heap_update not VACUUM that's at fault here.
What's less clear is whether there is any hazard from these bugs
in released branches. heap_update is certainly violating API
expectations, but if there is no code path that can set all-visible
without a cleanup lock then it's only a latent bug. That's not
100% certain though, besides which we should worry about extensions
or future back-patch fixes that could introduce such code paths.
I chose to back-patch to v12. Fixing RelationGetBufferForTuple
before that would require also back-patching portions of older
fixes (notably 0d1fe9f74), which is more code churn than seems
prudent to fix a hypothetical issue.
Discussion: https://postgr.es/m/2247102.1618008027@sss.pgh.pa.us
Commit 6f38d4dac3 failed to heed a warning about the stability of the
value pointed to by "otid". The caller is allowed to pass in a pointer to
newtup->t_self, which will be updated during the execution of the
function. Instead, the SSI check should use the value we copy into
oldtup.t_self near the top of the function.
Not a live bug, because newtup->t_self doesn't really get updated until
a bit later, but it was confusing and broke the rule established by the
comment.
Back-patch to 13.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2689164.1618160085%40sss.pgh.pa.us
VACUUM has never needed to call ambulkdelete() for each index in cases
where there are precisely zero TIDs in its dead_tuples array by the end
of its first pass over the heap (also its only pass over the heap in
this scenario). Index vacuuming is simply not required when this
happens. Index cleanup will still go ahead, but in practice most calls
to amvacuumcleanup() are usually no-ops when there were zero preceding
ambulkdelete() calls. In short, VACUUM has generally managed to avoid
index scans when there were clearly no index tuples to delete from
indexes. But cases with _close to_ no index tuples to delete were
another matter -- a round of ambulkdelete() calls took place (one per
index), each of which performed a full index scan.
VACUUM now behaves just as if there were zero index tuples to delete in
cases where there are in fact "virtually zero" such tuples. That is, it
can now bypass index vacuuming and heap vacuuming as an optimization
(though not index cleanup). Whether or not VACUUM bypasses indexes is
determined dynamically, based on the just-observed number of heap pages
in the table that have one or more LP_DEAD items (LP_DEAD items in heap
pages have a 1:1 correspondence with index tuples that still need to be
deleted from each index in the worst case).
We only skip index vacuuming when 2% or less of the table's pages have
one or more LP_DEAD items -- bypassing index vacuuming as an
optimization must not noticeably impede setting bits in the visibility
map. As a further condition, the dead_tuples array (i.e. VACUUM's array
of LP_DEAD item TIDs) must not exceed 32MB at the point that the first
pass over the heap finishes, which is also when the decision to bypass
is made. (The VACUUM must also have been able to fit all TIDs in its
maintenance_work_mem-bound dead_tuples space, though with a default
maintenance_work_mem setting it can't matter.)
This avoids surprising jumps in the duration and overhead of routine
vacuuming with workloads where successive VACUUM operations consistently
have almost zero dead index tuples. The number of LP_DEAD items may
well accumulate over multiple VACUUM operations, before finally the
threshold is crossed and VACUUM performs conventional index vacuuming.
Even then, the optimization will have avoided a great deal of largely
unnecessary index vacuuming.
In the future we may teach VACUUM to skip index vacuuming on a per-index
basis, using a much more sophisticated approach. For now we only
consider the extreme cases, where we can be quite confident that index
vacuuming just isn't worth it using simple heuristics.
Also log information about how many heap pages have one or more LP_DEAD
items when autovacuum logging is enabled.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmkebqPd4MVGuPTOS9bMFvp9MDs5cRTCOsv1rQJ3jCbXw@mail.gmail.com
Add a failsafe mechanism that is triggered by VACUUM when it notices
that the table's relfrozenxid and/or relminmxid are dangerously far in
the past. VACUUM checks the age of the table dynamically, at regular
intervals.
When the failsafe triggers, VACUUM takes extraordinary measures to
finish as quickly as possible so that relfrozenxid and/or relminmxid can
be advanced. VACUUM will stop applying any cost-based delay that may be
in effect. VACUUM will also bypass any further index vacuuming and heap
vacuuming -- it only completes whatever remaining pruning and freezing
is required. Bypassing index/heap vacuuming is enabled by commit
8523492d, which made it possible to dynamically trigger the mechanism
already used within VACUUM when it is run with INDEX_CLEANUP off.
It is expected that the failsafe will almost always trigger within an
autovacuum to prevent wraparound, long after the autovacuum began.
However, the failsafe mechanism can trigger in any VACUUM operation.
Even in a non-aggressive VACUUM, where we're likely to not advance
relfrozenxid, it still seems like a good idea to finish off remaining
pruning and freezing. An aggressive/anti-wraparound VACUUM will be
launched immediately afterwards. Note that the anti-wraparound VACUUM
that follows will itself trigger the failsafe, usually before it even
begins its first (and only) pass over the heap.
The failsafe is controlled by two new GUCs: vacuum_failsafe_age, and
vacuum_multixact_failsafe_age. There are no equivalent reloptions,
since that isn't expected to be useful. The GUCs have rather high
defaults (both default to 1.6 billion), and are expected to generally
only be used to make the failsafe trigger sooner/more frequently.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmgH3ySGYeC-m-eOBsa2=sDwa292-CFghV4rESYo39FsQ@mail.gmail.com
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
Retry the call to heap_prune_page() in rare cases where there is
disagreement between the heap_prune_page() call and the call to
HeapTupleSatisfiesVacuum() that immediately follows. Disagreement is
possible when a concurrently-aborted transaction makes a tuple DEAD
during the tiny window between each step. This was the only case where
a tuple considered DEAD by VACUUM still had storage following pruning.
VACUUM's definition of dead tuples is now uniformly simple and
unambiguous: dead tuples from each page are always LP_DEAD line pointers
that were encountered just after we performed pruning (and just before
we considered freezing remaining items with tuple storage).
Eliminating the tupgone=true special case enables INDEX_CLEANUP=off
style skipping of index vacuuming that takes place based on flexible,
dynamic criteria. The INDEX_CLEANUP=off case had to know about skipping
indexes up-front before now, due to a subtle interaction with the
special case (see commit dd695979) -- this was a special case unto
itself. Now there are no special cases. And so now it won't matter
when or how we decide to skip index vacuuming: it won't affect how
pruning behaves, and it won't be affected by any of the implementation
details of pruning or freezing.
Also remove XLOG_HEAP2_CLEANUP_INFO records. These are no longer
necessary because we now rely entirely on heap pruning taking care of
recovery conflicts. There is no longer any need to generate recovery
conflicts for DEAD tuples that pruning just missed. This also means
that heap vacuuming now uses exactly the same strategy for recovery
conflicts as index vacuuming always has: REDO routines never need to
process a latestRemovedXid from the WAL record, since earlier REDO of
the WAL record from pruning is sufficient in all cases. The generic
XLOG_HEAP2_CLEAN record type is now split into two new record types to
reflect this new division (these are called XLOG_HEAP2_PRUNE and
XLOG_HEAP2_VACUUM).
Also stop acquiring a super-exclusive lock for heap pages when they're
vacuumed during VACUUM's second heap pass. A regular exclusive lock is
enough. This is correct because heap page vacuuming is now strictly a
matter of setting the LP_DEAD line pointers to LP_UNUSED. No other
backend can have a pointer to a tuple located in a pinned buffer that
can be invalidated by a concurrent heap page vacuum operation.
Heap vacuuming can now be thought of as conceptually similar to index
vacuuming and conceptually dissimilar to heap pruning. Heap pruning now
has sole responsibility for anything involving the logical contents of
the database (e.g., managing transaction status information, recovery
conflicts, considering what to do with HOT chains). Index vacuuming and
heap vacuuming are now only concerned with recycling garbage items from
physical data structures that back the logical database.
Bump XLOG_PAGE_MAGIC due to pruning and heap page vacuum WAL record
changes.
Credit for the idea of retrying pruning a page to avoid the tupgone case
goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
Add a lazy_scan_heap() subsidiary function that handles heap pruning and
tuple freezing: lazy_scan_prune(). This is a great deal cleaner. The
code that remains in lazy_scan_heap()'s per-block loop can now be
thought of as code that either comes before or after the call to
lazy_scan_prune(), which is now the clear focal point. This division is
enforced by the way in which we now manage state. lazy_scan_prune()
outputs state (using its own struct) that describes what to do with the
page following pruning and freezing (e.g., visibility map maintenance,
recording free space in the FSM). It doesn't get passed any special
instructional state from the preamble code, though.
Also cleanly separate the logic used by a VACUUM with INDEX_CLEANUP=off
from the logic used by single-heap-pass VACUUMs. The former case is now
structured as the omission of index and heap vacuuming by a two pass
VACUUM. The latter case goes back to being used only when the table
happens to have no indexes (just as it was before commit a96c41fe).
This structure is much more natural, since the whole point of
INDEX_CLEANUP=off is to skip the index and heap vacuuming that would
otherwise take place. The single-heap-pass case doesn't skip any useful
work, though -- it just does heap pruning and heap vacuuming together
when the table happens to have no indexes.
Both of these changes are preparation for an upcoming patch that
generalizes the mechanism used by INDEX_CLEANUP=off. The later patch
will allow VACUUM to give up on index and heap vacuuming dynamically, as
problems emerge (e.g., with wraparound), so that an affected VACUUM
operation can finish up as soon as possible.
Also fix a very old bug in single-pass VACUUM VERBOSE output. We were
reporting the number of tuples deleted via pruning as a direct
substitute for reporting the number of LP_DEAD items removed in a
function that deals with the second pass over the heap. But that
doesn't work at all -- they're two different things.
To fix, start tracking the total number of LP_DEAD items encountered
during pruning, and use that in the report instead. A single pass
VACUUM will always vacuum away whatever LP_DEAD items a heap page has
immediately after it is pruned, so the total number of LP_DEAD items
encountered during pruning equals the total number vacuumed-away.
(They are _not_ equal in the INDEX_CLEANUP=off case, but that's okay
because skipping index vacuuming is now a totally orthogonal concept to
one-pass VACUUM.)
Also stop reporting the count of LP_UNUSED items in VACUUM VERBOSE
output. This makes the output of VACUUM VERBOSE more consistent with
log_autovacuum's output (because it never showed information about
LP_UNUSED items). VACUUM VERBOSE reported LP_UNUSED items left behind
by the last VACUUM, and LP_UNUSED items created via pruning HOT chains
during the current VACUUM (it never included LP_UNUSED items left behind
by the current VACUUM's second pass over the heap). This makes it
useless as an indicator of line pointer bloat, which must have been the
original intention. (Like the first VACUUM VERBOSE issue, this issue was
arguably an oversight in commit 282d2a03, which added the heap-only
tuple optimization.)
Finally, stop reporting empty_pages in VACUUM VERBOSE output, and start
reporting pages_removed instead. This also makes the output of VACUUM
VERBOSE more consistent with log_autovacuum's output (which does not
show empty_pages, but does show pages_removed). An empty page isn't
meaningfully different to a page that is almost empty, or a page that is
empty but for only a small number of remaining LP_UNUSED items.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
Commit 49f49def took entirely the wrong approach to fixing this issue.
Just allocate a local buffer access strategy in each individual worker
instead of trying to propagate state. This state was never propagated
by parallel VACUUM in the first place.
It looks like the only reason that this worked following commit 40d964ec
was that it involved static global variables, which are initialized to 0
per the C standard.
A more comprehensive fix may be necessary, even on HEAD. This fix
should at least get the buildfarm green once again.
Thanks once again to Thomas Munro for continued off-list assistance with
the issue.
Parallel VACUUM relied on global variable state from the leader process
being propagated to workers on fork(). Commit b4af70cb removed most
uses of global variables inside vacuumlazy.c, but did not account for
the buffer access strategy state.
To fix, propagate the state through shared memory instead.
Per buildfarm failures on elver, curculio, and morepork.
Many thanks to Thomas Munro for off-list assistance with this issue.
Reorganize the state struct used by VACUUM -- group related items
together to make it easier to understand. Also stop relying on stack
variables inside lazy_scan_heap() -- move those into the state struct
instead. Doing things this way simplifies large groups of related
functions whose function signatures had a lot of unnecessary redundancy.
Switch over to using int64 for the struct fields used to count things
that are reported to the user via log_autovacuum and VACUUM VERBOSE
output. We were using double, but that doesn't seem to have any
advantages. Using int64 makes it possible to add assertions that verify
that the first pass over the heap (pruning) encounters precisely the
same number of LP_DEAD items that get deleted from indexes later on, in
the second pass over the heap. These assertions will be added in later
commits.
Finally, adjust the signatures of functions with IndexBulkDeleteResult
pointer arguments in cases where there was ambiguity about whether or
not the argument relates to a single index or all indexes. Functions
now use the idiom that both ambulkdelete() and amvacuumcleanup() have
always used (where appropriate): accept a mutable IndexBulkDeleteResult
pointer argument, and return a result IndexBulkDeleteResult pointer to
caller.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkeOSYwC6KNckbhk2b1aNnWum6Yyn0NKP9D-Hq1LGTDPw@mail.gmail.com
We always inserted a larger-than-fillfactor tuple into a newly-extended
page, even when existing pages were empty or contained nothing but an
unused line pointer. This was unnecessary relation extension. Start
tolerating page usage up to 1/8 the maximum space that could be taken up
by line pointers. This is somewhat arbitrary, but it should allow more
cases to reuse pages. This has no effect on tables with fillfactor=100
(the default).
John Naylor and Floris van Nee. Reviewed by Matthias van de Meent.
Reported by Floris van Nee.
Discussion: https://postgr.es/m/6e263217180649339720afe2176c50aa@opammb0562.comp.optiver.com
The design of the data structures which allow storage of the per-worker
memory during parallel seq scans were not ideal. The work done in
56788d215 required an additional data structure to allow workers to
remember the range of pages that had been allocated to them for
processing during a parallel seqscan. That commit added a void pointer
field to TableScanDescData to allow heapam to store the per-worker
allocation information. However putting the field there made very little
sense given that we have AM specific structs for that, e.g.
HeapScanDescData.
Here we remove the void pointer field from TableScanDescData and add a
dedicated field for this purpose to HeapScanDescData.
Previously we also allocated memory for this parallel per-worker data for
all scans, regardless if it was a parallel scan or not. This was just a
wasted allocation for non-parallel scans, so here we make the allocation
conditional on the scan being parallel.
Also, add previously missing pfree() to free the per-worker data in
heap_endscan().
Reported-by: Andres Freund
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20210317023101.anvejcfotwka6gaa@alap3.anarazel.de
end_heap_rewrite was not careful to ensure that the target relation
is open at the smgr level before performing its final smgrimmedsync.
In ordinary cases this is no problem, because it would have been
opened earlier during the rewrite. However a crash can be reproduced
by re-clustering an empty table with CLOBBER_CACHE_ALWAYS enabled.
Although that exact scenario does not crash in v13, I think that's
a chance result of unrelated planner changes, and the problem is
likely still reachable with other test cases. The true proximate
cause of this failure is commit c6b92041d, which replaced a call to
heap_sync (which was careful about opening smgr) with a direct call
to smgrimmedsync. Hence, back-patch to v13.
Amul Sul, per report from Neha Sharma; cosmetic changes
and test case by me.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
Once a relation's autovacuum is completed, the logs include more
information about this relation state if the threshold of
log_autovacuum_min_duration (or its relation option) is reached, with
for example contents about the statistics of the VACUUM operation for
the relation, WAL and system usage.
This commit adds more information about the statistics of the relation's
indexes, with one line of logs generated for each index. The index
stats were already calculated, but not printed in the context of
autovacuum yet. While on it, some refactoring is done to keep track of
the index statistics directly within LVRelStats, simplifying some
routines related to parallel VACUUMs.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoAy6SxHiTivh5yAPJSUE4S=QRPpSZUdafOSz0R+fRcM6Q@mail.gmail.com
Previously, to check relation permanence, the Relation's Form_pg_class
structure member relpersistence was compared to the value
RELPERSISTENCE_PERMANENT ("p"). This commit adds the macro
RelationIsPermanent() and is used in appropirate places to simplify the
code. This matches other RelationIs* macros.
This macro will be used in more places in future cluster file encryption
patches.
Discussion: https://postgr.es/m/20210318153134.GH20766@tamriel.snowman.net
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Consistently set a flag variable that tracks whether the current heap
page has a dead item during lazy vacuum's heap scan. We missed the
common case where there is an preexisting (or even a new) LP_DEAD heap
line pointer.
Also make it clear that the variable might be affected by an existing
line pointer, say from an earlier opportunistic pruning operation. This
distinction is important because it's the main reason why we can't just
use the nearby tups_vacuumed variable instead.
No backpatch. In theory failing to set the page level flag variable had
no consequences. Currently it is only used to defensively check if a
page marked all visible has dead items, which should never happen anyway
(if it does then the table must be corrupt).
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Diagnosed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAtZb4+HJT_8RoOXvu4HM-Zd4HKS3YSMCH6+-W=bDyh-w@mail.gmail.com
vacuumlazy.c sometimes fails to update pg_class entries for each index
(to ensure that pg_class.reltuples is current), even though analyze.c
assumed that that must have happened during VACUUM ANALYZE. There are
at least a couple of reasons for this. For example, vacuumlazy.c could
fail to update pg_class when the index AM indicated that its statistics
are merely an estimate, per the contract for amvacuumcleanup() routines
established by commit e57345975c back in 2006.
Stop assuming that pg_class must have been updated with accurate
statistics within VACUUM ANALYZE -- update pg_class for indexes at the
same time as the table relation in all cases. That way VACUUM ANALYZE
will never fail to keep pg_class.reltuples reasonably accurate.
The only downside of this approach (compared to the old approach) is
that it might inaccurately set pg_class.reltuples for indexes whose heap
relation ends up with the same inaccurate value anyway. This doesn't
seem too bad. We already consistently called vac_update_relstats() (to
update pg_class) for the heap/table relation twice during any VACUUM
ANALYZE -- once in vacuumlazy.c, and once in analyze.c. We now make
sure that we call vac_update_relstats() at least once (though often
twice) for each index.
This is follow up work to commit 9f3665fb, which dealt with issues in
btvacuumcleanup(). Technically this fixes an unrelated issue, though.
btvacuumcleanup() no longer provides an accurate num_index_tuples value
following commit 9f3665fb (when there was no btbulkdelete() call during
the VACUUM operation in question), but hashvacuumcleanup() has worked in
the same way for many years now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzknxdComjhqo4SUxVFk_Q1171GJO2ZgHZ1Y6pion6u8rA@mail.gmail.com
Backpatch: 13-, just like commit 9f3665fb.
In the current lazy vacuum implementation, some index AMs such as
btree indexes call lazy_tid_reaped() for each index tuple during
ambulkdelete to check if the index tuple points to the (collected)
garbage tuple. In that function, we simply call bsearch(), but we
should be able to know the result without bsearch() if the index tuple
points to the heap tuple that is out of range of the collected garbage
tuples. Therefore, add a simple bound check before resorting to
bsearch(). Testing has shown that this can give significant
performance benefits.
Author: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+fd4k76j8jKzJzcx8UqEugvayaMSnQz0iLUt_XgBp-_-bd22A@mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Teach VACUUM VERBOSE to report on pages deleted by the _current_ VACUUM
operation -- these are newly deleted pages. VACUUM VERBOSE continues to
report on the total number of deleted pages in the entire index (no
change there). The former is a subset of the latter.
The distinction between each category of deleted index page only arises
with index AMs where page deletion is supported and is decoupled from
page recycling for performance reasons.
This is follow-up work to commit e5d8a999, which made nbtree store
64-bit XIDs (not 32-bit XIDs) in pages at the point at which they're
deleted. Note that the btm_last_cleanup_num_delpages metapage field
added by that commit usually gets set to pages_newly_deleted. The
exceptions (the scenarios in which they're not equal) all seem to be
tricky cases for the implementation (of page deletion and recycling) in
general.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX%3Dd5u-tRYhi-F4wnV2uN2zHpMUXw%40mail.gmail.com
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
Pavan Deolasee recently noted that a few of the
HeapTupleHeaderIndicatesMovedPartitions calls added by commit
5db6df0c01 are useless, since they are done after comparing t_self
with t_ctid. But because t_self can never be set to the magical values
that indicate that the tuple moved partition, this can never succeed: if
the first test fails (so we know t_self equals t_ctid), necessarily the
second test will also fail.
So these checks can be removed and no harm is done. There's no bug
here, just a code legibility issue.
Reported-by: Pavan Deolasee <pavan.deolasee@gmail.com>
Discussion: https://postgr.es/m/20200929164411.GA15497@alvherre.pgsql
Both luckily and unluckily the passed values meant the same for all
types. Luckily because that meant my confusion caused no harm,
unluckily because otherwise the compiler might have warned...
In passing, synchronize parameter names between definition and
declaration.
Reported-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wz=L=nBoepQdH9b5Qd0nMvepFT2CnT6sjWvvpOXa=K8HVQ@mail.gmail.com
Up until now, we've held this lock when performing a checkpoint or
restartpoint, but commit 076a055acf back
in 2004 and commit 7e48b77b1c from 2009,
taken together, have removed all need for this. In the present code,
there's only ever one process entitled to attempt a checkpoint: either
the checkpointer, during normal operation, or the postmaster, during
single-user operation. So, we don't need the lock.
One possible concern in making this change is that it means that
a substantial amount of code where HOLD_INTERRUPTS() was previously
in effect due to the preceding LWLockAcquire() will now be
running without that. This could mean that ProcessInterrupts()
gets called in places from which it didn't before. However, this
seems unlikely to do very much, because the checkpointer doesn't
have any signal mapped to die(), so it's not clear how,
for example, ProcDiePending = true could happen in the first
place. Similarly with ClientConnectionLost and recovery conflicts.
Also, if there are any such problems, we might want to fix them
rather than reverting this, since running lots of code with
interrupt handling suspended is generally bad.
Patch by me, per an inquiry by Amul Sul. Review by Tom Lane
and Michael Paquier.
Discussion: http://postgr.es/m/CAAJ_b97XnBBfYeSREDJorFsyoD1sHgqnNuCi=02mNQBUMnA=FA@mail.gmail.com
Both heapgettup() and heapgettup_pagemode() incorrectly set the first page
to scan in a backward scan in which the number of pages to scan was
specified by heap_setscanlimits(). The code incorrectly started the scan
at the end of the relation when startBlk was 0, or otherwise at
startBlk - 1, neither of which is correct when only scanning a subset of
pages.
The fix here checks if heap_setscanlimits() has changed the number of
pages to scan and if so we set the first page to scan as the final page in
the specified range during backward scans.
Proper adjustment of this code was forgotten when heap_setscanlimits() was
added in 7516f5259 back in 9.5. However, practice, nowhere in core code
performs backward scans after having used heap_setscanlimits(), yet, it is
possible an extension uses the heap functions in this way, hence
backpatch.
An upcoming patch does use heap_setscanlimits() with backward scans, so
this must be fixed before that can go in.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGc9h0_oVD2CtgBcxCS1N-qDYZSeBRnUh+0CWJA9cMaA@mail.gmail.com
Backpatch-through: 9.5, all supported versions
This adds code omitted from commit 7db0cd2145 by accident, which had
two consequences. Firstly, only rows inserted by heap_multi_insert were
frozen as expected when running COPY FREEZE, while heap_insert left
rows unfrozen. That however includes rows in TOAST tables, so a lot of
data might have been left unfrozen. Secondly, page might have been left
partially empty after relcache invalidation.
This addresses both of those issues.
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Make sure COPY FREEZE marks the pages as PD_ALL_VISIBLE and updates the
visibility map. Until now we only marked individual tuples as frozen,
but page-level flags were not updated, so the first VACUUM after the
COPY FREEZE had to rewrite the whole table.
This is a fairly old patch, and multiple people worked on it. The first
version was written by Jeff Janes, and then reworked by Pavan Deolasee
and Anastasia Lubennikova.
Author: Anastasia Lubennikova, Pavan Deolasee, Jeff Janes
Reviewed-by: Kuntal Ghosh, Jeff Janes, Tomas Vondra, Masahiko Sawada,
Andres Freund, Ibrar Ahmed, Robert Haas, Tatsuro Ishii,
Darafei Praliaskouski
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Discussion: https://postgr.es/m/CAMkU%3D1w3osJJ2FneELhhNRLxfZitDgp9FPHee08NT2FQFmz_pQ%40mail.gmail.com
Teach nbtree and heapam to cooperate in order to eagerly remove
duplicate tuples representing dead MVCC versions. This is "bottom-up
deletion". Each bottom-up deletion pass is triggered lazily in response
to a flood of versions on an nbtree leaf page. This usually involves a
"logically unchanged index" hint (these are produced by the executor
mechanism added by commit 9dc718bd).
The immediate goal of bottom-up index deletion is to avoid "unnecessary"
page splits caused entirely by version duplicates. It naturally has an
even more useful effect, though: it acts as a backstop against
accumulating an excessive number of index tuple versions for any given
_logical row_. Bottom-up index deletion complements what we might now
call "top-down index deletion": index vacuuming performed by VACUUM.
Bottom-up index deletion responds to the immediate local needs of
queries, while leaving it up to autovacuum to perform infrequent clean
sweeps of the index. The overall effect is to avoid certain
pathological performance issues related to "version churn" from UPDATEs.
The previous tableam interface used by index AMs to perform tuple
deletion (the table_compute_xid_horizon_for_tuples() function) has been
replaced with a new interface that supports certain new requirements.
Many (perhaps all) of the capabilities added to nbtree by this commit
could also be extended to other index AMs. That is left as work for a
later commit.
Extend deletion of LP_DEAD-marked index tuples in nbtree by adding logic
to consider extra index tuples (that are not LP_DEAD-marked) for
deletion in passing. This increases the number of index tuples deleted
significantly in many cases. The LP_DEAD deletion process (which is now
called "simple deletion" to clearly distinguish it from bottom-up
deletion) won't usually need to visit any extra table blocks to check
these extra tuples. We have to visit the same table blocks anyway to
generate a latestRemovedXid value (at least in the common case where the
index deletion operation's WAL record needs such a value).
Testing has shown that the "extra tuples" simple deletion enhancement
increases the number of index tuples deleted with almost any workload
that has LP_DEAD bits set in leaf pages. That is, it almost never fails
to delete at least a few extra index tuples. It helps most of all in
cases that happen to naturally have a lot of delete-safe tuples. It's
not uncommon for an individual deletion operation to end up deleting an
order of magnitude more index tuples compared to the old naive approach
(e.g., custom instrumentation of the patch shows that this happens
fairly often when the regression tests are run).
Add a further enhancement that augments simple deletion and bottom-up
deletion in indexes that make use of deduplication: Teach nbtree's
_bt_delitems_delete() function to support granular TID deletion in
posting list tuples. It is now possible to delete individual TIDs from
posting list tuples provided the TIDs have a tableam block number of a
table block that gets visited as part of the deletion process (visiting
the table block can be triggered directly or indirectly). Setting the
LP_DEAD bit of a posting list tuple is still an all-or-nothing thing,
but that matters much less now that deletion only needs to start out
with the right _general_ idea about which index tuples are deletable.
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
No bump in BTREE_VERSION, since there are no changes to the on-disk
representation of nbtree indexes. Indexes built on PostgreSQL 12 or
PostgreSQL 13 will automatically benefit from bottom-up index deletion
(i.e. no reindexing required) following a pg_upgrade. The enhancement
to simple deletion is available with all B-Tree indexes following a
pg_upgrade, no matter what PostgreSQL version the user upgrades from.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm+maE3apHB8NOtmM=p-DO65j2V5GzAWCOEEuy3JZgb2g@mail.gmail.com
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
On further reflection it seems better to call PageGetMaxOffsetNumber()
after acquiring a buffer lock on the page. This shouldn't really
matter, but doing it this way is cleaner.
Follow-up to commit 42288174.
Backpatch: 12-, just like commit 42288174
The logic for determining the latest removed XID for the purposes of
generating recovery conflicts in REDO routines was subtly broken. It
failed to follow links from HOT chains, and so failed to consider all
relevant heap tuple headers in some cases.
To fix, expand the loop that deals with LP_REDIRECT line pointers to
also deal with HOT chains. The new version of the loop is loosely based
on a similar loop from heap_prune_chain().
The impact of this bug is probably quite limited, since the horizon code
necessarily deals with heap tuples that are pointed to by LP_DEAD-set
index tuples. The process of setting LP_DEAD index tuples (e.g. within
the kill_prior_tuple mechanism) is highly correlated with opportunistic
pruning of pointed-to heap tuples. Plus the question of generating a
recovery conflict usually comes up some time after index tuple LP_DEAD
bits were initially set, unlike heap pruning, where a latestRemovedXid
is generated at the point of the pruning operation (heap pruning has no
deferred "would-be page split" style processing that produces conflicts
lazily).
Only backpatch to Postgres 12, the first version where this logic runs
during original execution (following commit 558a9165e0). The index
latestRemovedXid mechanism has had the same bug since it first appeared
over 10 years ago (in commit a760893d), but backpatching to all
supported versions now seems like a bad idea on balance. Running the
new improved code during recovery seems risky, especially given the lack
of complaints from the field.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=Eib393+HHcERK_9MtgNS7Ew1HY=RDC_g6GL46zM5C6Q@mail.gmail.com
Backpatch: 12-
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
pg_database.datfrozenxid gets updated using an in-place update at the
end of vacuum or autovacuum. Since 96cdeae, as pg_database has a toast
relation, it is possible for a pg_database tuple to have toast values
if there is a large set of ACLs in place. In such a case, the in-place
update would fail because of the flattening of the toast values done for
the catcache entry fetched. Instead of using a copy from the catcache,
this changes the logic to fetch the copy of the tuple by directly
scanning pg_database.
Per the lack of complaints on the matter, no backpatch is done. Note
that before 96cdeae, attempting to insert such a tuple to pg_database
would cause a "row is too big" error, so the end-of-vacuum problem was
not reachable.
Author: Ashwin Agrawal, Junfeng Yang
Discussion: https://postgr.es/m/DM5PR0501MB38800D9E4605BCA72DD35557CCE10@DM5PR0501MB3880.namprd05.prod.outlook.com
Previously pg_stat_progress_cluster view reported the current block
number in heap scan as the number of heap blocks scanned (i.e.,
heap_blks_scanned). This reported number could be incorrect when
synchronize_seqscans is enabled, because it allowed the heap scan to
start at block in middle. This could result in wraparounds in the
heap_blks_scanned column when the heap scan wrapped around.
This commit fixes the bug by calculating the number of blocks from
the block that the heap scan starts at to the current block in scan,
and reporting that number in the heap_blks_scanned column.
Also, in pg_stat_progress_cluster view, previously heap_blks_scanned
could not reach heap_blks_total at the end of heap scan phase
if the last pages scanned were empty. This commit fixes the bug by
manually updating heap_blks_scanned to the same value as
heap_blks_total when the heap scan phase finishes.
Back-patch to v12 where pg_stat_progress_cluster view was introduced.
Reported-by: Matthias van de Meent
Author: Matthias van de Meent
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAEze2WjCBWSGkVfYag001Rc4+-nNLDpWM7QbyD6yPvuhKs-gYQ@mail.gmail.com
Remove a CHECK_FOR_INTERRUPTS() call that could never actually handle an
interrupt. We always have a heap page buffer lock at this point.
Having a useless CHECK_FOR_INTERRUPTS() call is harmless but misleading.
It is probably possible to work around the immediate problem by moving
the CHECK_FOR_INTERRUPTS() to before the heap page buffer lock is
acquired. That isn't enough to make the function responsive to
interrupts, though. The index AM caller will still hold an exclusive
buffer lock of its own.
* Avoid pointlessly highlighting that an index vacuum was executed by a
parallel worker; user doesn't care.
* Don't give the impression that a non-concurrent reindex of an invalid
index on a TOAST table would work, because it wouldn't.
* Add a "translator:" comment for a mysterious message.
Discussion: https://postgr.es/m/20201107034943.GA16596@alvherre.pgsql
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Certain background workers initiate parallel queries while
debug_query_string==NULL, at which point they attempted strlen(NULL) and
died to SIGSEGV. Older debug_query_string observers allow NULL, so do
likewise in these newer ones. Back-patch to v11, where commit
7de4a1bcc5 introduced the first of these.
Discussion: https://postgr.es/m/20201014022636.GA1962668@rfd.leadboat.com
This fixes a bug in the edge case where, for a temp table, heap_page_prune()
can end up with a different horizon than heap_vacuum_rel(). Which can trigger
errors like "ERROR: cannot freeze committed xmax ...".
The bug was introduced due to interaction of a7212be8b9 "Set cutoff xmin more
aggressively when vacuuming a temporary table." with dc7420c2c9 "snapshot
scalability: Don't compute global horizons while building snapshots.".
The problem is caused by lazy_scan_heap() assuming that the only reason its
HeapTupleSatisfiesVacuum() call would return HEAPTUPLE_DEAD is if the tuple is
a HOT tuple, or if the tuple's inserting transaction has aborted since the
heap_page_prune() call. But after a7212be8b9 that was also possible in other
cases for temp tables, because heap_page_prune() uses a different visibility
test after dc7420c2c9.
The fix is fairly simple: Move the special case logic for temp tables from
vacuum_set_xid_limits() to the infrastructure introduced in dc7420c2c9. That
ensures that the horizon used for pruning is at least as aggressive as the one
used by lazy_scan_heap(). The concrete horizon used for temp tables is
slightly different than the logic in dc7420c2c9, but should always be as
aggressive as before (see comments).
A significant benefit to centralizing the logic procarray.c is that now the
more aggressive horizons for temp tables does not just apply to VACUUM but
also to e.g. HOT pruning and the nbtree killtuples logic.
Because isTopLevel is not needed by vacuum_set_xid_limits() anymore, I
undid the the related changes from a7212be8b9.
This commit also adds an isolation test ensuring that the more aggressive
vacuuming and pruning of temp tables keeps working.
Debugged-By: Amit Kapila <amit.kapila16@gmail.com>
Debugged-By: Tom Lane <tgl@sss.pgh.pa.us>
Debugged-By: Ashutosh Sharma <ashu.coek88@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20201014203103.72oke6hqywcyhx7s@alap3.anarazel.de
Discussion: https://postgr.es/m/20201015083735.derdzysdtqdvxshp@alap3.anarazel.de
Pavan Deolasee recently noted that a few of the
HeapTupleHeaderIndicatesMovedPartitions calls added by commit
5db6df0c01 are useless, since they are done after comparing t_self
with t_ctid. But because t_self can never be set to the magical values
that indicate that the tuple moved partition, this can never succeed: if
the first test fails (so we know t_self equals t_ctid), necessarily the
second test will also fail.
So these checks can be removed and no harm is done.
Discussion: https://postgr.es/m/20200929164411.GA15497@alvherre.pgsql
After commits 85f6b49c2c and 3ba59ccc89, we can allow parallel inserts
which was earlier not possible as parallel group members won't conflict
for relation extension and page lock. In those commits, we forgot to
update comments at few places.
Author: Amit Kapila
Reviewed-by: Robert Haas and Dilip Kumar
Backpatch-through: 13
Discussion: https://postgr.es/m/CAFiTN-tMrQh5FFMPx5aWJ+1gi1H6JxktEhq5mDwCHgnEO5oBkA@mail.gmail.com
Since other sessions aren't allowed to look into a temporary table
of our own session, we do not need to worry about the global xmin
horizon when setting the vacuum XID cutoff. Indeed, if we're not
inside a transaction block, we may set oldestXmin to be the next
XID, because there cannot be any in-doubt tuples in a temp table,
nor any tuples that are dead but still visible to some snapshot of
our transaction. (VACUUM, of course, is never inside a transaction
block; but we need to test that because CLUSTER shares the same code.)
This approach allows us to always clean out a temp table completely
during VACUUM, independently of concurrent activity. Aside from
being useful in its own right, that simplifies building reproducible
test cases.
Discussion: https://postgr.es/m/3490536.1598629609@sss.pgh.pa.us
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
The additional information added will be an offset number for heap
operations. This information will help us in finding the exact tuple due
to which the error has occurred.
Author: Mahendra Singh Thalor and Amit Kapila
Reviewed-by: Sawada Masahiko, Justin Pryzby and Amit Kapila
Discussion: https://postgr.es/m/CAKYtNApK488TDF4bMbw+1QH8HJf9cxdNDXquhU50TK5iv_FtCQ@mail.gmail.com
We were displaying the wrong phase information for 'info' message in the
index clean up phase because we were switching to the previous phase a bit
early. We were also not displaying context information for heap phase
unless the block number is valid which is fine for error cases but for
messages at 'info' or lower error level it appears to be inconsistent with
index phase information.
Reported-by: Sawada Masahiko
Author: Sawada Masahiko
Reviewed-by: Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k4HcbhPnCs7paRTw1K-AHin8y4xKomB9Ru0ATw0UeTy2w@mail.gmail.com
Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e0. The other corrections
are more self-evident.
The new array contains the xids for all connected backends / in-use
PGPROC entries in a dense manner (in contrast to the PGPROC/PGXACT
arrays which can have unused entries interspersed).
This improves performance because GetSnapshotData() always needs to
scan the xids of all live procarray entries and now there's no need to
go through the procArray->pgprocnos indirection anymore.
As the set of running top-level xids changes rarely, compared to the
number of snapshots taken, this substantially increases the likelihood
of most data required for a snapshot being in l2 cache. In
read-mostly workloads scanning the xids[] array will sufficient to
build a snapshot, as most backends will not have an xid assigned.
To keep the xid array dense ProcArrayRemove() needs to move entries
behind the to-be-removed proc's one further up in the array. Obviously
moving array entries cannot happen while a backend sets it
xid. I.e. locking needs to prevent that array entries are moved while
a backend modifies its xid.
To avoid locking ProcArrayLock in GetNewTransactionId() - a fairly hot
spot already - ProcArrayAdd() / ProcArrayRemove() now needs to hold
XidGenLock in addition to ProcArrayLock. Adding / Removing a procarray
entry is not a very frequent operation, even taking 2PC into account.
Due to the above, the dense array entries can only be read or modified
while holding ProcArrayLock and/or XidGenLock. This prevents a
concurrent ProcArrayRemove() from shifting the dense array while it is
accessed concurrently.
While the new dense array is very good when needing to look at all
xids it is less suitable when accessing a single backend's xid. In
particular it would be problematic to have to acquire a lock to access
a backend's own xid. Therefore a backend's xid is not just stored in
the dense array, but also in PGPROC. This also allows a backend to
only access the shared xid value when the backend had acquired an
xid.
The infrastructure added in this commit will be used for the remaining
PGXACT fields in subsequent commits. They are kept separate to make
review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
When a table is scanned by heapam_index_build_range_scan (née
IndexBuildHeapScan) and the table lock being held allows concurrent data
changes, it is possible for new HOT chains to sprout in a page that were
unknown when the scan of a page happened. This leads to an error such
as
ERROR: failed to find parent tuple for heap-only tuple at (X,Y) in table "tbl"
because the root tuple was not present when we first obtained the list
of the page's root tuples. This can be fixed by re-obtaining the list
of root tuples, if we see that a heap-only tuple appears to point to a
non-existing root.
This was reported by Anastasia as occurring for BRIN summarization
(which exists since 9.5), but I think it could theoretically also happen
with CREATE INDEX CONCURRENTLY (much older) or REINDEX CONCURRENTLY
(very recent). It seems a happy coincidence that BRIN forces us to
backpatch this all the way to 9.5.
Reported-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/602d8487-f0b2-5486-0088-0f372b2549fa@postgrespro.ru
Backpatch: 9.5 - master
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Avoid repeatedly calling lseek(SEEK_END) during recovery by caching
the size of each fork. For now, we can't use the same technique in
other processes, because we lack a shared invalidation mechanism.
Do this by generalizing the pre-existing caching used by FSM and VM
to support all forks.
Discussion: https://postgr.es/m/CAEepm%3D3SSw-Ty1DFcK%3D1rU-K6GSzYzfdD4d%2BZwapdN7dTa6%3DnQ%40mail.gmail.com
For pg_attribute, this allows to insert at once a full set of attributes
for a relation (roughly 15% of WAL reduction in extreme cases). For
pg_shdepend, this reduces the work done when creating new shared
dependencies from a database template. The number of slots used for the
insertion is capped at 64kB of data inserted for both, depending on the
number of items to insert and the length of the rows involved.
More can be done for other catalogs, like pg_depend. This part requires
a different approach as the number of slots to use depends also on the
number of entries discarded as pinned dependencies. This is also
related to the rework or dependency handling for ALTER TABLE and CREATE
TABLE, mainly.
Author: Daniel Gustafsson
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20190213182737.mxn6hkdxwrzgxk35@alap3.anarazel.de
Previously we would allocate blocks to parallel workers during a parallel
sequential scan 1 block at a time. Since other workers were likely to
request a block before a worker returns for another block number to work
on, this could lead to non-sequential I/O patterns in each worker which
could cause the operating system's readahead to perform poorly or not at
all.
Here we change things so that we allocate consecutive "chunks" of blocks
to workers and have them work on those until they're done, at which time
we allocate another chunk for the worker. The size of these chunks is
based on the size of the relation.
Initial patch here was by Thomas Munro which showed some good improvements
just having a fixed chunk size of 64 blocks with a simple ramp-down near
the end of the scan. The revisions of the patch to make the chunk size
based on the relation size and the adjusted ramp-down in powers of two was
done by me, along with quite extensive benchmarking to determine the
optimal chunk sizes.
For the most part, benchmarks have shown significant performance
improvements for large parallel sequential scans on Linux, FreeBSD and
Windows using SSDs. It's less clear how this affects the performance of
cloud providers. Tests done so far are unable to obtain stable enough
performance to provide meaningful benchmark results. It is possible that
this could cause some performance regressions on more obscure filesystems,
so we may need to later provide users with some ability to get something
closer to the old behavior. For now, let's leave that until we see that
it's really required.
Author: Thomas Munro, David Rowley
Reviewed-by: Ranier Vilela, Soumyadeep Chakraborty, Robert Haas
Reviewed-by: Amit Kapila, Kirk Jamison
Discussion: https://postgr.es/m/CA+hUKGJ_EErDv41YycXcbMbCBkztA34+z1ts9VQH+ACRuvpxig@mail.gmail.com
Valgrind builds with assertions enabled sometimes perform a
theoretically unsafe page access inside an assertion in
heapam_tuple_lock(). This happened when the eval-plan-qual isolation
test ran one of the permutations added by commit a2418f9e23.
Avoid complaints from Valgrind by moving the assertion ever so slightly.
This is minor cleanup for commit 1e0dfd16, which added Valgrind buffer
access instrumentation.
No backpatch, since this only happens within an assertion, and seems
very unlikely to cause any real problems even with assert-enabled
builds.
Incorrect function names were referenced. As this fixes some portions
of tableam.h, that is mentioned in the docs as something to look at when
implementing a table AM, backpatch down to 12 where this has been
introduced.
Author: Hironobu Suzuki
Discussion: https://postgr.es/m/8fe6d672-28dd-3f1d-7aed-ac2f6d599d3f@interdb.jp
Backpatch-through: 12
Use separate functions to save and restore error context information as
that made code easier to understand. Also, make it clear that the index
information required for error context is sane.
Author: Andres Freund, Justin Pryzby, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1LWo+v1OWu=Sky27GTGSCuOmr7iaURNbc5xz6jO+SaPeA@mail.gmail.com
Rewrite the documentation of these functions, in light of recent bug fix
commit 5940ffb2.
Back-patch to 13 where the check-for-conflict-out code was split up into
AM-specific and generic parts, and new documentation was added that now
looked wrong.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
There's a very low risk that RecentGlobalXmin could be far enough in
the past to be older than relfrozenxid, or even wrapped
around. Luckily the consequences of that having happened wouldn't be
too bad - the page wouldn't be pruned for a while.
Avoid that risk by using TransactionXmin instead. As that's announced
via MyPgXact->xmin, it is protected against wrapping around (see code
comments for details around relfrozenxid).
Author: Andres Freund
Discussion: https://postgr.es/m/20200328213023.s4eyijhdosuc4vcj@alap3.anarazel.de
Backpatch: 9.5-
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This allows gathering the WAL generation statistics for each statement
execution. The three statistics that we collect are the number of WAL
records, the number of full page writes and the amount of WAL bytes
generated.
This helps the users who have write-intensive workload to see the impact
of I/O due to WAL. This further enables us to see approximately what
percentage of overall WAL is due to full page writes.
In the future, we can extend this functionality to allow us to compute the
the exact amount of WAL data due to full page writes.
This patch in itself is just an infrastructure to compute WAL usage data.
The upcoming patches will expose this data via explain, auto_explain,
pg_stat_statements and verbose (auto)vacuum output.
Author: Kirill Bychik, Julien Rouhaud
Reviewed-by: Dilip Kumar, Fujii Masao and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Commit 40d964ec99 allowed vacuum command to process indexes in parallel but
forgot to accumulate the buffer usage stats of parallel workers. This
allows leader backend to accumulate buffer usage stats of all the parallel
workers.
Reported-by: Julien Rouhaud
Author: Sawada Masahiko
Reviewed-by: Dilip Kumar, Amit Kapila and Julien Rouhaud
Discussion: https://postgr.es/m/20200328151721.GB12854@nol
vacuum code.
After commit b61d161c14, during vacuum, we cache the information of
relation name and relation namespace in local structure LVRelStats so that
we can use it in an error callback function. We can use the cached
information to avoid the calls to RelationGetRelationName(),
RelationGetNamespace() and get_namespace_name(). This is mainly for the
consistent in vacuum code path but it will avoid the extra syscache lookup
we do in get_namespace_name().
Author: Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://www.postgresql.org/message-id/20191120210600.GC30362@telsasoft.com
This reverts commit 2aa6e33, that added a fast path to skip
anti-wraparound and non-aggressive autovacuum jobs (these have no sense
as anti-wraparound implies aggressive). With a cluster using a high
amount of relations with a portion of them being heavily updated, this
could cause autovacuum to lock down, with autovacuum workers attempting
repeatedly those jobs on the same relations for the same database, that
just kept being skipped. This lock down can be solved with a manual
VACUUM FREEZE.
Justin King has reported one environment where the issue happened, and
Julien Rouhaud and I have been able to reproduce it in a second
environment. With a very aggressive autovacuum_freeze_max_age,
triggering those jobs with pgbench is a matter of minutes, and hitting
the lock down is a lot harder (my local tests failed to do that).
Note that anti-wraparound and non-aggressive jobs can only be triggered
on a subset of shared catalogs:
- pg_auth_members
- pg_authid
- pg_database
- pg_replication_origin
- pg_shseclabel
- pg_subscription
- pg_tablespace
While the lock down was possible down to v12, the root cause of those
jobs is a much older issue, which needs more analysis.
Bonus thanks to Andres Freund for the discussion.
Reported-by: Justin King
Discussion: https://postgr.es/m/CAE39h22zPLrkH17GrkDgAYL3kbjvySYD1io+rtnAUFnaJJVS4g@mail.gmail.com
Backpatch-through: 12
The recheck isn't needed anymore, as RelationGetBufferForTuple() now
extends the relation with RBM_ZERO_AND_LOCK. Previously we needed to
handle the fact that relation extension extended the relation and then
separately acquired a lock on the page - while expecting that the page
is empty.
Reported-By: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQArA_=J0D5T258xsCY6Xtf6wiH4b=QDPDgVS+WZUN10WDw@mail.gmail.com
The additional information displayed will be block number for error
occurring while processing heap and index name for error occurring
while processing the index.
This will help us in diagnosing the problems that occur during a vacuum.
For ex. due to corruption (either caused by bad hardware or by some bug)
if we get some error while vacuuming, it can help us identify the block
in heap and or additional index information.
It sets up an error context callback to display additional information
with the error. During different phases of vacuum (heap scan, heap
vacuum, index vacuum, index clean up, heap truncate), we update the error
context callback to display appropriate information. We can extend it to
a bit more granular level like adding the phases for FSM operations or for
prefetching the blocks while truncating. However, I felt that it requires
adding many more error callback function calls and can make the code a bit
complex, so left those for now.
Author: Justin Pryzby, with few changes by Amit Kapila
Reviewed-by: Alvaro Herrera, Amit Kapila, Andres Freund, Michael Paquier
and Sawada Masahiko
Discussion: https://www.postgresql.org/message-id/20191120210600.GC30362@telsasoft.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Introduce a GUC and a tablespace option to control I/O prefetching, much
like effective_io_concurrency, but for work that is done on behalf of
many client sessions.
Use the new setting in heapam.c instead of the hard-coded formula
effective_io_concurrency + 10 introduced by commit 558a9165e0. Go with
a default value of 10 for now, because it's a round number pretty close
to the value used for that existing case.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
Multi-insert for heap is not yet used actively for catalogs, but the
code to support this case is in place for logical decoding. The
existing code forgot to issue a XLOG_HEAP2_NEW_CID record for the first
tuple inserted, leading to failures when attempting to use multiple
inserts for catalogs at decoding time. This commit fixes the problem by
WAL-logging the needed CID.
This is not an active bug, so no back-patch is done.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/E0D4CC67-A1CF-4DF4-991D-B3AC2EB5FAE9@yesql.se
VACUUM may truncate heap in several batches. The activity report
is logged for each batch, and contains the number of pages in the table
before and after the truncation, and also the elapsed time during
the truncation. Previously the elapsed time reported in each batch was
the total elapsed time since starting the truncation until finishing
each batch. For example, if the truncation was processed dividing into
three batches, the second batch reported the accumulated time elapsed
during both first and second batches. This is strange and confusing
because the number of pages in the table reported together is not
total. Instead, each batch should report the time elapsed during
only that batch.
The cause of this issue was that the resource usage snapshot was
initialized only at the beginning of the truncation and was never
reset later. This commit fixes the issue by changing VACUUM so that
the resource usage snapshot is reset at each batch.
Back-patch to all supported branches.
Reported-by: Tatsuhito Kasahara
Author: Tatsuhito Kasahara
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/CAP0=ZVJsf=NvQuy+QXQZ7B=ZVLoDV_JzsVC1FRsF1G18i3zMGg@mail.gmail.com
Using 32 bit counters means they can now realistically wrap around when
vacuuming extremely large tables. Because they're signed integers,
stats printed by vacuum look very odd when they do.
We'd love to backpatch this, but refrain because the variables are
exported and could cause third-party code to break.
Reviewed-by: Julien Rouhaud, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200131205926.GA16367@alvherre.pgsql
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
In commit 40d964ec99, we changed the way memory is allocated for dead
tuples but forgot to update the place where we compute the maximum
number of dead tuples. This could lead to invalid memory requests.
Reported-by: Andres Freund
Diagnosed-by: Andres Freund
Author: Masahiko Sawada
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/20200121060020.e3cr7s7fj5rw4lok@alap3.anarazel.de
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
Instead of always calling heap_fetch_toast_slice during detoasting,
invoke a table AM callback which, when the toast table is a heap
table, will be heap_fetch_toast_slice.
This makes it possible for a table AM other than heap to be used
as a TOAST table. It also completes the series of commits intended
to improve the interaction of tableam with TOAST that began with
commit 8b94dab06617ef80a0901ab103ebd8754427ef5a; detoast.c is
now, hopefully, fully AM-independent.
Patch by me, reviewed by Andres Freund and Peter Eisentraut.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Previously, the toast table had to be implemented by the same AM that
was used for the main table, which was bad, because the detoasting
code won't work with anything but heap. This commit doesn't fix the
latter problem, although there's another patch coming which does,
but it does let you pick something that works (i.e. heap, right now).
Patch by me, reviewed by Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
Peter Geoghegan
Daniel Gustafsson
Michael Paquier
Alvaro Herrera
Peter Eisentraut
Heikki Linnakangas
Tom Lane
Andrew Dunstan
Tomas Vondra
David Rowley
Fujii Masao
Thomas Munro
Noah Misch
Bruce Momjian
Robert Haas
Stephen Frost
Andres Freund
Amit Kapila