initdb now initializes a pg_hba.conf that allows replication connections
from the local host, same as it does for regular connections. The
connecting user still needs to have the REPLICATION attribute or be a
superuser.
The intent is to allow pg_basebackup from the local host to succeed
without requiring additional configuration.
Michael Paquier <michael.paquier@gmail.com> and me
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
Although there are good reasons for our policy of including postgres.h
as the first #include in every .c file, never from .h files, there are
two places where it seems expedient to violate the policy because the
alternative is to modify externally-supplied .c files. (In the case
of the regexp library, the idea that it's externally-supplied is kind
of at odds with reality, but I haven't entirely given up hope that it
will become a standalone project some day.) Add some comments to make
it explicit that this is a policy violation and provide the reasoning.
In passing, move #include "miscadmin.h" out of regcomp.c and into
regcustom.h, which is where it should be if we're taking this reasoning
seriously at all.
Discussion: https://postgr.es/m/CAEepm=2zCoeq3QxVwhS5DFeUh=yU6z81pbWMgfOB8OzyiBwxzw@mail.gmail.com
Discussion: https://postgr.es/m/11634.1488932128@sss.pgh.pa.us
Compilers that don't realize that elog(ERROR) doesn't return
complained that SlabRealloc() failed to return a value.
While at it, fix the rather muddled header comment for the function.
Per buildfarm.
Compilers that don't realize that ereport(ERROR) doesn't return
complained that XmlTableGetValue() failed to return a value.
Also, make XmlTableFetchRow's non-USE_LIBXML case look more like
the other ones. As coded, it could lead to "unreachable code"
warnings with USE_LIBXML enabled.
Oversights in commit fcec6caaf. Per buildfarm.
Further fallout from commit c29aff959: there are some files that need
<float.h>, and were getting it from datatype/timestamp.h, but it was not
apparent in my (tgl's) testing because the requirement for <float.h>
exists only on certain Windows toolchains.
Report and patch by David Rowley.
Discussion: https://postgr.es/m/CAKJS1f-BHceaFzZScFapDV48gUVM2CAOBfhkgffdqXzFb+kwew@mail.gmail.com
This exposes the existing explain summary option to users to allow them
to choose if they wish to have the planning time and totalled run time
included in the EXPLAIN result. The existing default behavior is
retained if SUMMARY is not specified- running explain without analyze
will not print the summary lines (just the planning time, currently)
while running explain with analyze will include the summary lines (both
the planning time and the totalled execution time).
Users who wish to see the summary information for plain explain can now
use: EXPLAIN (SUMMARY ON) query; Users who do not want to have the
summary printed for an analyze run can use:
EXPLAIN (ANALYZE ON, SUMMARY OFF) query;
With this, we can now also have EXPLAIN ANALYZE queries included in our
regression tests by using:
EXPLAIN (ANALYZE ON, TIMING OFF, SUMMARY off) query;
I went ahead and added an example of this, which will hopefully not make
the buildfarm complain.
Author: Ashutosh Bapat
Discussion: https://postgr.es/m/CAFjFpReE5z2h98U2Vuia8hcEkpRRwrauRjHmyE44hNv8-xk+XA@mail.gmail.com
Large chunks (those too large for any palloc freelist) are managed as
separate blocks. Formerly, realloc'ing or pfree'ing such a chunk required
O(N) time in a context with N blocks, since we had to traipse down the
singly-linked block list to locate the block's predecessor before we could
fix the list links. This can result in O(N^2) runtime in situations where
large numbers of such chunks are manipulated within one context. Cases
like that were not foreseen in the original design of aset.c, and indeed
didn't arise until fairly recently. But such problems can now occur in
reorderbuffer.c and in hash joining, both of which make repeated large
requests without scaling up their request size as they do so, and which
will free their requests in not-necessarily-LIFO order.
To fix, change the block list from singly-linked to doubly-linked.
This adds another 4 or 8 bytes to ALLOC_BLOCKHDRSZ, but that doesn't
seem like unacceptable overhead, since aset.c's blocks are normally
8K or more, and never less than 1K in current practice.
In passing, get rid of some redundant AllocChunkGetPointer() calls in
AllocSetRealloc (the compiler might be smart enough to optimize these
away anyway, but no need to assume that) and improve AllocSetCheck's
checking of block header fields.
Back-patch to 9.4 where reorderbuffer.c appeared. We could take this
further back, but currently there's no evidence that it would be useful.
Discussion: https://postgr.es/m/CAMkU=1x1hvue1XYrZoWk_omG0Ja5nBvTdvgrOeVkkeqs71CV8g@mail.gmail.com
The index is scanned by a single process, but then all cooperating
processes can iterate jointly over the resulting set of heap blocks.
In the future, we might also want to support using a parallel bitmap
index scan to set up for a parallel bitmap heap scan, but that's a
job for another day.
Dilip Kumar, with some corrections and cosmetic changes by me. The
larger patch set of which this is a part has been reviewed and tested
by (at least) Andres Freund, Amit Khandekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, Thomas Munro, and me.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
Any logical rep workers must have their subscription entries in
pg_subscription. To ensure this, we need to prevent the launcher
from starting new worker corresponding to the subscription that
DROP SUBSCRIPTION command is removing. To implement this,
previously LogicalRepLauncherLock was introduced and held until
the end of transaction running DROP SUBSCRIPTION. But using
LWLock for that purpose was not valid.
Instead, this commit changes DROP SUBSCRIPTION so that it takes
AccessExclusiveLock on pg_subscription, in order to ensure that
the launcher cannot see any subscriptions being removed. Also this
commit gets rid of LogicalRepLauncherLock.
Patch by me, reviewed by Petr Jelinek
Discussion: https://www.postgresql.org/message-id/CAHGQGwHPi8ky-yANFfe0sgmhKtsYcQLTnKx07bW9S7-Rn1746w@mail.gmail.com
libxml2 older than 2.9.1 does not have xmlXPathSetContextNode (released
in 2013, so reasonable platforms have trouble). That function is fairly
trivial, so I have inlined it in the one added caller. This passes
tests on my machine; let's see what the buildfarm thinks about it.
Per joint complaint from Tom Lane and buildfarm.
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
Commit 898a792eb8 fixed the connection
leak issue, but it was an unreliable way of bugfix. This bugfix was
assuming that walrcv_command() subroutine cannot throw an error,
but it's untenable assumption. For example, if it will be changed
so that an error is thrown, connection leak issue will happen again.
This patch ensures that the connection is closed even when
walrcv_command() subroutine throws an error.
Patch by me, reviewed by Petr Jelinek and Michael Paquier
Discussion: https://www.postgresql.org/message-id/2058.1487704345@sss.pgh.pa.us
Parallel executor nodes can't assume that parallel execution will
happen in every case where the plan calls for it, because it might
not work out that way. However, parallel index scan and parallel
index-only scan failed to do the right thing here. Repair.
Amit Kapila, per a report from me.
Discussion: http://postgr.es/m/CAA4eK1Kq5qb_u2AOoda5XBB91vVWz90w=LgtRLgsssriS8pVTw@mail.gmail.com
When a shared iterator is used, each call to tbm_shared_iterate()
returns a result that has not yet been returned to any process
attached to the shared iterator. In other words, each cooperating
processes gets a disjoint subset of the full result set, but all
results are returned exactly once.
This is infrastructure for parallel bitmap heap scan.
Dilip Kumar. The larger patch set of which this is a part has been
reviewed and tested by (at least) Andres Freund, Amit Khandekar,
Tushar Ahuja, Rafia Sabih, Haribabu Kommi, and Thomas Munro.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
The primary goal here is to move all of the related page modifications
to a single section of code, in preparation for adding write-ahead
logging. In passing, rename _hash_metapinit to _hash_init, since it
initializes more than just the metapage.
Amit Kapila. The larger patch series of which this is a part has been
reviewed and tested by Álvaro Herrera, Ashutosh Sharma, Mark Kirkwood,
Jeff Janes, and Jesper Pedersen.
Commit 45be99f8cd took the position
that performing a merge join in parallel was not likely to work out
well, but this conclusion was greeted with skepticism even at the
time. Whether it was true then or not, it's clearly not true any
more now that we have parallel index scan.
Dilip Kumar, reviewed by Amit Kapila and by me.
Discussion: http://postgr.es/m/CAFiTN-v3=cM6nyFwFGp0fmvY4=kk79Hq9Fgu0u8CSJ-EEq1Tiw@mail.gmail.com
The SQL standard says that you should be able to write "CHARACTER SET foo"
as part of the declaration of a char-type column. We don't implement that,
but a rough form of support has existed in gram.y since commit f10b63923.
That's now sat there for nigh 20 years without anyone fleshing it out ---
and even if someone did, the contemplated approach of having separate data
type name(s) for every character set certainly isn't what we'd do today.
Let's just remove the grammar production; if anyone is ever motivated to
work on this, reinventing the grammar support is a trivial fraction of
what they'd have to do. And we've never documented anything about
supporting such a clause.
Per gripe from Neha Khatri.
Discussion: https://postgr.es/m/CAFO0U+-iOS5oYN5v3SBuZvfhPUTRrkDFEx8w7H17B07Rwg3YUA@mail.gmail.com
Extract the logic used by hash_inner_and_outer into a separate
function, get_cheapest_parallel_safe_total_inner, so that it can
also be used to plan parallel merge joins.
Also, add a require_parallel_safe argument to the existing function
get_cheapest_path_for_pathkeys, because parallel merge join needs
to find the cheapest path for a given set of pathkeys that is
parallel-safe, not just the cheapest one overall.
Patch by me, reviewed by Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoYOv+dFK0MWW6366dFj_xTnohQfoBDrHyB7d1oZhrgPjA@mail.gmail.com
When the very cheapest path is not parallel-safe, we want to instead use
the cheapest unparameterized path that is. The old code searched
innerrel->cheapest_parameterized_paths, but that isn't right, because
the path we want may not be in that list. Search innerrel->pathlist
instead.
Spotted by Dilip Kumar.
Discussion: http://postgr.es/m/CAFiTN-szCEcZrQm0i_w4xqSaRUTOUFstNu32Zn4rxxDcoa8gnA@mail.gmail.com
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
With RLS active, "COPY tab TO ..." failed under -DRELCACHE_FORCE_RELEASE,
and would sometimes fail without that, because it used the relation name
directly from the relcache as part of the parsetree it's building. That
becomes a potentially-dangling pointer as soon as the relcache entry is
closed, a bit further down. Typical symptom if the relcache entry chanced
to get cleared would be "relation does not exist" error with a garbage
relation name, or possibly a core dump; but if you were really truly
unlucky, the COPY might copy from the wrong table.
Per report from Andrew Dunstan that regression tests fail with
-DRELCACHE_FORCE_RELEASE. The core tests now pass for me (but have
not tried "make check-world" yet).
Discussion: https://postgr.es/m/7b52f900-0579-cda9-ae2e-de5da17090e6@2ndQuadrant.com
Combine DROP of FOREIGN DATA WRAPPER, SERVER, POLICY, RULE, and TRIGGER
into generic DropStmt grammar.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The generic drop support already supported dropping multiple objects of
the same kind at once. But the previous representation
of function signatures across two grammar symbols and structure members
made this cumbersome to do for functions, so it was not supported. Now
that function signatures are represented by a single structure, it's
trivial to add this support. Same for aggregates and operators.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The old function took function name and function argument list as
separate arguments. Now that all function signatures are passed around
as ObjectWithArgs structs, this is no longer necessary and can be
replaced by a function that takes ObjectWithArgs directly. Similarly
for aggregates and operators.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
In simpler times, it might have worked to refer to all kinds of objects
by a list of name components and an optional argument list. But this
doesn't work for all objects, which has resulted in a collection of
hacks to place various other nodes types into these fields, which have
to be unpacked at the other end. This makes it also weird to represent
lists of such things in the grammar, because they would have to be lists
of singleton lists, to make the unpacking work consistently. The other
problem is that keeping separate name and args fields makes it awkward
to deal with lists of functions.
Change that by dropping the objargs field and have objname, renamed to
object, be a generic Node, which can then be flexibly assigned and
managed using the normal Node mechanisms. In many cases it will still
be a List of names, in some cases it will be a string Value, for types
it will be the existing Typename, for functions it will now use the
existing ObjectWithArgs node type. Some of the more obscure object
types still use somewhat arbitrary nested lists.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This makes the handling of operators similar to that of functions and
aggregates.
Rename node FuncWithArgs to ObjectWithArgs, to reflect the expanded use.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This makes it consistent with the usage in opclass_item.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Commit 19dc233c32 introduced these
comments. Michael Paquier noticed that one of them had a typo, but
a bigger problem is that they were not an accurate description of
what the code was doing.
Patch by me.
Per libpq documentation, the initial state must be
PGRES_POLLING_WRITING. Failing to do that appears to cause some issues
on some Windows systems.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
The following parameters are now updateable with ShareUpdateExclusiveLock
effective_io_concurrency
parallel_workers
seq_page_cost
random_page_cost
n_distinct
n_distinct_inherited
Simon Riggs and Fabrízio Mello
Record partitioned table dependencies as DEPENDENCY_AUTO
rather than DEPENDENCY_NORMAL, so that DROP TABLE just works.
Remove all the tests for partitioned tables where earlier
work had deliberately avoided using CASCADE.
Amit Langote, reviewed by Ashutosh Bapat and myself
This reliably fails with -DRELCACHE_FORCE_RELEASE, as reported by
Andrew Dunstan, and could sometimes fail in normal operation, resulting
in a wrong persistence value being used for the transient table.
It's not immediately clear to me what effects that might have beyond
the risk of a crash while accessing OldHeap->rd_rel->relpersistence,
but it's probably not good.
Bug introduced by commit f41872d0c, and made substantially worse by
commit 85b506bbf, which added a second such access significantly
later than the heap_close. I doubt the first reference could fail
in a production scenario, but the second one definitely could.
Discussion: https://postgr.es/m/7b52f900-0579-cda9-ae2e-de5da17090e6@2ndQuadrant.com
Disallow CREATE SUBSCRIPTION and DROP SUBSCRIPTION in a transaction
block when the replication slot is to be created or dropped, since that
cannot be rolled back.
based on patch by Masahiko Sawada <sawada.mshk@gmail.com>
Add tab completion for publications and subscriptions. Also, to be able
to get a list of subscriptions, make pg_subscription world-readable but
revoke access to subconninfo using column privileges.
From: Michael Paquier <michael.paquier@gmail.com>
This makes the connection attempt from CREATE SUBSCRIPTION and from
WalReceiver interruptable by the user in case the libpq connection is
hanging. The previous coding required immediate shutdown (SIGQUIT) of
PostgreSQL in that situation.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Thom Brown <thom@linux.com>
Allow VACUUM and Autovacuum to report the oldestxmin value they
used while cleaning tables, helping to make better sense out of
the other statistics we report in various cases.
The syslogger will write out the current stderr and csvlog names, if
it's running and there are any, to a new file in the data directory
called "current_logfiles". We take care to remove this file when it
might no longer be valid (but not at shutdown). The function
pg_current_logfile() can be used to read the entries in the file.
Gilles Darold, reviewed and modified by Karl O. Pinc, Michael
Paquier, and me. Further review by Álvaro Herrera and Christoph Berg.
Tom Lane observed buildfarm failures caused by the select_parallel
regression test trying to launch new parallel queries before the
worker slots used by the previous ones were freed. Try to fix this by
having the postmaster free the worker slots before it sends the
SIGUSR1 notifications to the registering process. This doesn't
completely eliminate the possibility that the user backend might
(correctly) observe the worker as dead before the slot is free, but I
believe it should make the window significantly narrower.
Patch by me, per complaint from Tom Lane. Reviewed by Amit Kapila.
Discussion: http://postgr.es/m/30673.1487310734@sss.pgh.pa.us
Currently, the whole row is shown without column names. Instead,
adopt a style similar to _bt_check_unique() in ExecFindPartition()
and show the failing key: (key1, ...) = (val1, ...).
Amit Langote, per a complaint from Simon Riggs. Reviewed by me;
I also adjusted the grammar in one of the comments.
Discussion: http://postgr.es/m/9f9dc7ae-14f0-4a25-5485-964d9bfc19bd@lab.ntt.co.jp
The final patch will be less messy if the prefetching support is
a bit better isolated, so do that.
Dilip Kumar, with some changes by me. The larger patch set of which
this is a part has been reviewed and tested by (at least) Andres
Freund, Amit Khandekar, Tushar Ahuja, Rafia Sabih, Haribabu Kommi, and
Thomas Munro.
Also, recursively perform VACUUM and ANALYZE on partitions when the
command is applied to a partitioned table. In passing, some related
documentation updates.
Amit Langote, reviewed by Michael Paquier, Ashutosh Bapat, and by me.
Discussion: http://postgr.es/m/47288cf1-f72c-dfc2-5ff0-4af962ae5c1b@lab.ntt.co.jp
Likewise in RestoreSnapshot(). Do so by copying between the user buffer
and a stack buffer of known alignment. Back-patch to 9.6, where this
last applies cleanly. In master, the select_parallel test dies with
SIGBUS on "Oracle Solaris 10 1/13 s10s_u11wos_24a SPARC", building
32-bit with gcc 4.9.2. In 9.6 and 9.5, the buffers in question happen
to be sufficiently-aligned, and this change is mere insurance against
future 9.6 changes or extension code compromising that.
As with commit 30df93f698 and commit
b0f18cb77f, the goal here is to move all
of the related page modifications to a single section of code, in
preparation for adding write-ahead logging.
Amit Kapila, with slight changes by me. The larger patch series of
which this is a part has been reviewed and tested by Álvaro Herrera,
Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper Pedersen.
In the previous commit I'd made MemoryContextContains() use
GetMemoryChunkContext(), but that causes trouble when the passed
pointer isn't allocated in any memory context - that's probably
something we shouldn't do, but the previous commit isn't a place for a
"policy" change.
The README was written as a "historical account", and that style
hasn't aged particularly well. Rephrase it to describe the current
situation, instead of having various version specific comments.
This also updates the description of how allocated chunks are
associated with their corresponding context, the method of which has
changed in the preceding commit.
Author: Andres Freund
Discussion: https://postgr.es/m/20170228074420.aazv4iw6k562mnxg@alap3.anarazel.de
The new slab allocator needs different per-allocation information than
the classical aset.c. The definition in 58b25e981 wasn't sufficiently
careful on 32 platforms with 8 byte alignment, leading to buildfarm
failures. That's not entirely easy to fix by just adjusting the
definition.
As slab.c doesn't actually need the size part(s) of the common header,
all chunks are equally sized after all, it seems better to instead
reduce the header to the part needed by all allocators, namely which
context an allocation belongs to. That has the advantage of reducing
the overhead of slab allocations, and also allows for more flexibility
in future allocators.
To avoid spreading the logic about accessing a chunk's context around,
centralize it in GetMemoryChunkContext(), which allows to delete a
good number of lines.
A followup commit will revise the mmgr/README portion about
StandardChunkHeader, and more.
Author: Andres Freund
Discussion: https://postgr.es/m/20170228074420.aazv4iw6k562mnxg@alap3.anarazel.de
Previously, only IndexTuple format was supported for the output data of
an index-only scan. This is fine for btree, which is just returning a
verbatim index tuple anyway. It's not so fine for SP-GiST, which can
return reconstructed data that's much larger than a page.
To fix, extend the index AM API so that index-only scan data can be
returned in either HeapTuple or IndexTuple format. There's other ways
we could have done it, but this way avoids an API break for index AMs
that aren't concerned with the issue, and it costs little except a couple
more fields in IndexScanDescs.
I changed both GiST and SP-GiST to use the HeapTuple method. I'm not
very clear on whether GiST can reconstruct data that's too large for an
IndexTuple, but that seems possible, and it's not much of a code change to
fix.
Per a complaint from Vik Fearing. Reviewed by Jason Li.
Discussion: https://postgr.es/m/49527f79-530d-0bfe-3dad-d183596afa92@2ndquadrant.fr
As with commit b0f18cb77f, the goal
here is to move all of the related page modifications to a single
section of code, in preparation for adding write-ahead logging.
Amit Kapila, with slight changes by me. The larger patch series
of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen, all of whom should also have been credited in the
previous commit message.
In preparation for adding write-ahead logging to hash indexes,
refactor _hash_freeovflpage and _hash_squeezebucket so that all
related page modifications happen in a single section of code. The
previous coding assumed that it would be fine to move tuples one at a
time, and also that the various operations involved in freeing an
overflow page didn't necessarily all need to be done together, all
of which is true if you don't care about write-ahead logging.
Amit Kapila, with slight changes by me.
PQerrorMessage() returns an error message with a trailing newline, but
in backend use (dblink, postgres_fdw, libpqwalreceiver), we want to have
the error message without that for emitting via ereport(). To simplify
that, add a function pchomp() that returns a pstrdup'ed string with the
trailing newline characters removed.
Note that this change alone does not yet fully address the performance
problems triggering this work, a large portion of the slowdown is
triggered by the tuple allocator, which isn't converted to the new
allocator. It would be possible to do so, but using evenly sized
objects, like both the current implementation in reorderbuffer.c and
slab.c, wastes a fair amount of memory. A later patch by Tomas will
introduce a better approach.
Author: Tomas Vondra
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/d15dff83-0b37-28ed-0809-95a5cc7292ad@2ndquadrant.com
The default general purpose aset.c style memory context is not a great
choice for allocations that are all going to be evenly sized,
especially when those objects aren't small, and have varying
lifetimes. There tends to be a lot of fragmentation, larger
allocations always directly go to libc rather than have their cost
amortized over several pallocs.
These problems lead to the introduction of ad-hoc slab allocators in
reorderbuffer.c. But it turns out that the simplistic implementation
leads to problems when a lot of objects are allocated and freed, as
aset.c is still the underlying implementation. Especially freeing can
easily run into O(n^2) behavior in aset.c.
While the O(n^2) behavior in aset.c can, and probably will, be
addressed, custom allocators for this behavior are more efficient
both in space and time.
This allocator is for evenly sized allocations, and supports both
cheap allocations and freeing, without fragmenting significantly. It
does so by allocating evenly sized blocks via malloc(), and carves
them into chunks that can be used for allocations. In order to
release blocks to the OS as early as possible, chunks are allocated
from the fullest block that still has free objects, increasing the
likelihood of a block being entirely unused.
A subsequent commit uses this in reorderbuffer.c, but a further
allocator is needed to resolve the performance problems triggering
this work.
There likely are further potentialy uses of this allocator besides
reorderbuffer.c.
There's potential further optimizations of the new slab.c, in
particular the array of freelists could be replaced by a more
intelligent structure - but for now this looks more than good enough.
Author: Tomas Vondra, editorialized by Andres Freund
Reviewed-By: Andres Freund, Petr Jelinek, Robert Haas, Jim Nasby
Discussion: https://postgr.es/m/d15dff83-0b37-28ed-0809-95a5cc7292ad@2ndquadrant.com
An upcoming patch introduces a new type of memory context. To avoid
duplicating debugging infrastructure within aset.c, move useful pieces
to memdebug.[ch].
While touching aset.c, fix printf format code in AllocFree* debug
macros.
Author: Tomas Vondra
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/b3b2245c-b37a-e1e5-ebc4-857c914bc747@2ndquadrant.com
This is expected to be useful mostly when performing such scans in
parallel, because in that case it allows (in combination with commit
acf555bc53) nodes below a Gather to get
control just before the DSM segment goes away.
KaiGai Kohei, except that I rewrote the documentation. Reviewed by
Claudio Freire.
Discussion: http://postgr.es/m/CADyhKSXJK0jUJ8rWv4AmKDhsUh124_rEn39eqgfC5D8fu6xVuw@mail.gmail.com
We had some AC_CHECK_HEADER tests that were really wastes of cycles,
because the code proceeded to #include those headers unconditionally
anyway, in all or a large majority of cases. The lack of complaints
shows that those headers are available on every platform of interest,
so we might as well let configure run a bit faster by not probing
those headers at all.
I suspect that some of the tests I left alone are equally useless, but
since all the existing #includes of the remaining headers are properly
guarded, I didn't touch them.
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
If someone were to try to call one of the enum comparison functions
using DirectFunctionCallN, it would very likely seem to work, because
only in unusual cases does enum_cmp_internal() need to access the
typcache. But once such a case occurred, code like that would crash
with a null pointer dereference. To make an oversight of that sort
less likely to escape detection, add a non-bypassable Assert that
fcinfo->flinfo isn't NULL.
Discussion: https://postgr.es/m/25226.1487900067@sss.pgh.pa.us
Twiddle the replication-related code so that its timestamp variables
are declared TimestampTz, rather than the uninformative "int64" that
was previously used for meant-to-be-always-integer timestamps.
This resolves the int64-vs-TimestampTz declaration inconsistencies
introduced by commit 7c030783a, though in the opposite direction to
what was originally suggested.
This required including datatype/timestamp.h in a couple more places
than before. I decided it would be a good idea to slim down that
header by not having it pull in <float.h> etc, as those headers are
no longer at all relevant to its purpose. Unsurprisingly, a small number
of .c files turn out to have been depending on those inclusions, so add
them back in the .c files as needed.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Discussion: https://postgr.es/m/27694.1487456324@sss.pgh.pa.us
We don't need it any more.
pg_controldata continues to report that date/time type storage is
"64-bit integers", but that's now a hard-wired behavior not something
it sees in the data. This avoids breaking pg_upgrade, and perhaps other
utilities that inspect pg_control this way. Ditto for pg_resetwal.
I chose to remove the "bigint_timestamps" output column of
pg_control_init(), though, as that function hasn't been around long
and probably doesn't have ossified users.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Columns with array pseudotypes have not been identified as arrays, so
they have been rendered as strings in the json and jsonb conversion
routines. This change allows them to be rendered as json arrays, making
it possible to deal correctly with the anyarray columns in pg_stats.
With this change, you can see the query that a parallel worker is
executing in pg_stat_activity, and if the worker crashes you can
see what query it was executing when it crashed.
Rafia Sabih, reviewed by Kuntal Ghosh and Amit Kapila and slightly
revised by me.
Several places in fd.c had badly-thought-through handling of error returns
from lseek() and close(). The fact that those would seldom fail on valid
FDs is probably the reason we've not noticed this up to now; but if they
did fail, we'd get quite confused.
LruDelete and LruInsert actually just Assert'd that lseek never fails,
which is pretty awful on its face.
In LruDelete, we indeed can't throw an error, because that's likely to get
called during error abort and so throwing an error would probably just lead
to an infinite loop. But by the same token, throwing an error from the
close() right after that was ill-advised, not to mention that it would've
left the LRU state corrupted since we'd already unlinked the VFD from the
list. I also noticed that really, most of the time, we should know the
current seek position and it shouldn't be necessary to do an lseek here at
all. As patched, if we don't have a seek position and an lseek attempt
doesn't give us one, we'll close the file but then subsequent re-open
attempts will fail (except in the somewhat-unlikely case that a
FileSeek(SEEK_SET) call comes between and allows us to re-establish a known
target seek position). This isn't great but it won't result in any state
corruption.
Meanwhile, having an Assert instead of an honest test in LruInsert is
really dangerous: if that lseek failed, a subsequent read or write would
read or write from the start of the file, not where the caller expected,
leading to data corruption.
In both LruDelete and FileClose, if close() fails, just LOG that and mark
the VFD closed anyway. Possibly leaking an FD is preferable to getting
into an infinite loop or corrupting the VFD list. Besides, as far as I can
tell from the POSIX spec, it's unspecified whether or not the file has been
closed, so treating it as still open could be the wrong thing anyhow.
I also fixed a number of other places that were being sloppy about
behaving correctly when the seekPos is unknown.
Also, I changed FileSeek to return -1 with EINVAL for the cases where it
detects a bad offset, rather than throwing a hard elog(ERROR). It seemed
pretty inconsistent that some bad-offset cases would get a failure return
while others got elog(ERROR). It was missing an offset validity check for
the SEEK_CUR case on a closed file, too.
Back-patch to all supported branches, since all this code is fundamentally
identical in all of them.
Discussion: https://postgr.es/m/2982.1487617365@sss.pgh.pa.us
Walsender uses the local buffers for each outgoing and incoming message.
Previously when creating replication slot, walsender forgot to initialize
one of them and which can cause the segmentation fault error. To fix this
issue, this commit changes walsender so that it always initialize them
before it executes the requested replication command.
Back-patch to 9.4 where replication slot was introduced.
Problem report and initial patch by Stas Kelvich, modified by me.
Report: https://www.postgresql.org/message-id/A1E9CB90-1FAC-4CAD-8DBA-9AA62A6E97C5@postgrespro.ru
Be specific about which pattern is being complained of, and avoid saying
"it's not supported in to_date", which is just confusing if the error is
actually coming out of to_timestamp. We can phrase it as "is only
supported in to_char", instead. Also, use the term "formatting field" not
"format pattern", because other error messages in the same file prefer that
terminology. (This isn't terribly consistent with the documentation, so
maybe we should change all these error messages?)
Versions of flex before 2.5.36 might generate code that results in an
"unused variable" warning, when using %option reentrant. Historically
we've worked around that by specifying -Wno-error, but that's an
unsatisfying solution. The official "fix" for this was just to insert a
dummy reference to the variable, so write a small perl script that edits
the generated C code similarly.
The MSVC side of this is untested, but the buildfarm should soon reveal
if I broke that.
Discussion: https://postgr.es/m/25456.1487437842@sss.pgh.pa.us
Commit 5262f7a4fc added similar support
for parallel index scans; this extends that work to index-only scans.
As with parallel index scans, this requires support from the index AM,
so currently parallel index-only scans will only be possible for btree
indexes.
Rafia Sabih, reviewed and tested by Rahila Syed, Tushar Ahuja,
and Amit Kapila
Discussion: http://postgr.es/m/CAOGQiiPEAs4C=TBp0XShxBvnWXuzGL2u++Hm1=qnCpd6_Mf8Fw@mail.gmail.com
A new function dsa_allocate_extended now takes flags which indicate
that huge allocations should be permitted, that out-of-memory
conditions should not throw an error, and/or that the returned memory
should be zero-filled, just like MemoryContextAllocateExtended.
Commit 9acb85597f, which added
dsa_allocate0, was broken because it failed to account for the
possibility that dsa_allocate() might return InvalidDsaPointer.
This fixes that problem along the way.
Thomas Munro, with some comment changes by me.
Discussion: http://postgr.es/m/CA+Tgmobt7CcF_uQP2UQwWmu4K9qCHehMJP9_9m1urwP8hbOeHQ@mail.gmail.com
The way the old query was written prevented some join optimizations
because the join conditions were hidden inside a CASE expression. With
a large number of constraints, the query became unreasonably slow. The
new query performs much better.
From: Alexey Bashtanov <bashtanov@imap.cc>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
The loops in ExecHashJoinNewBatch(), ExecHashIncreaseNumBatches(), and
ExecHashRemoveNextSkewBucket() are all capable of iterating over many
tuples without ever doing a CHECK_FOR_INTERRUPTS, so that the backend
might fail to respond to SIGINT or SIGTERM for an unreasonably long time.
Fix that. In the case of ExecHashJoinNewBatch(), it seems useful to put
the added CHECK_FOR_INTERRUPTS into ExecHashJoinGetSavedTuple() rather
than directly in the loop, because that will also ensure that both
principal code paths through ExecHashJoinOuterGetTuple() will do a
CHECK_FOR_INTERRUPTS, which seems like a good idea to avoid surprises.
Back-patch to all supported branches.
Tom Lane and Thomas Munro
Discussion: https://postgr.es/m/6044.1487121720@sss.pgh.pa.us
Jeff Janes noted that the error cursor position shown for some errors
would vary when operator_precedence_warning is turned on. We'd prefer
that option to have no undocumented effects, so this isn't desirable.
To fix, make sure that an AEXPR_PAREN node has the same exprLocation
as its child node.
(Note: it would be a little cheaper to use @2 here instead of an
exprLocation call, but there are cases where that wouldn't produce
the identical answer, so don't do it like that.)
Back-patch to 9.5 where this feature was introduced.
Discussion: https://postgr.es/m/CAMkU=1ykK+VhhcQ4Ky8KBo9FoaUJH3f3rDQB8TkTXi-ZsBRUkQ@mail.gmail.com
In combination with 569174f1be, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
When min_parallel_relation_size was added, the only supported type
of parallel scan was a parallel sequential scan, but there are
pending patches for parallel index scan, parallel index-only scan,
and parallel bitmap heap scan. Those patches introduce two new
types of complications: first, what's relevant is not really the
total size of the relation but the portion of it that we will scan;
and second, index pages and heap pages shouldn't necessarily be
treated in exactly the same way. Typically, the number of index
pages will be quite small, but that doesn't necessarily mean that
a parallel index scan can't pay off.
Therefore, we introduce min_parallel_table_scan_size, which works
out a degree of parallelism for scans based on the number of table
pages that will be scanned (and which is therefore equivalent to
min_parallel_relation_size for parallel sequential scans) and also
min_parallel_index_scan_size which can be used to work out a degree
of parallelism based on the number of index pages that will be
scanned.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KowGSYYVpd2qPpaPPA5R90r++QwDFbrRECTE9H_HvpOg@mail.gmail.com
Discussion: http://postgr.es/m/CAA4eK1+TnM4pXQbvn7OXqam+k_HZqb0ROZUMxOiL6DWJYCyYow@mail.gmail.com
The core of the functionality was already implemented when
pg_import_system_collations was added. This just exposes it as an
option in the SQL command.
This isn't exposed to the optimizer or the executor yet; we'll add
support for those things in a separate patch. But this puts the
basic mechanism in place: several processes can attach to a parallel
btree index scan, and each one will get a subset of the tuples that
would have been produced by a non-parallel scan. Each index page
becomes the responsibility of a single worker, which then returns
all of the TIDs on that page.
Rahila Syed, Amit Kapila, Robert Haas, reviewed and tested by
Anastasia Lubennikova, Tushar Ahuja, and Haribabu Kommi.
This doesn't do anything to make Param nodes anything other than
parallel-restricted, so this only helps with uncorrelated subplans,
and it's not necessarily very cheap because each worker will run the
subplan separately (just as a Hash Join will build a separate copy of
the hash table in each participating process), but it's a first step
toward supporting cases that are more likely to help in practice, and
is occasionally useful on its own.
Amit Kapila, reviewed and tested by Rafia Sabih, Dilip Kumar, and
me.
Discussion: http://postgr.es/m/CAA4eK1+e8Z45D2n+rnDMDYsVEb5iW7jqaCH_tvPMYau=1Rru9w@mail.gmail.com
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
I noticed while hacking on join UNION transforms that planner.c's
function get_base_rel_indexes() just duplicates the functionality of
get_relids_in_jointree(). It doesn't even have the excuse of being
older code :-(. Drop it and use the latter function instead.
The ALTER TABLE ALTER TYPE implementation can issue DROP INDEX and
CREATE INDEX to refit existing indexes for the new column type. Since
this CREATE INDEX is an implementation detail of an index alteration,
the ensuing DefineIndex() should skip ACL checks specific to index
creation. It already skips the namespace ACL check. Make it skip the
tablespace ACL check, too. Back-patch to 9.2 (all supported versions).
Reviewed by Tom Lane.
This stores a data type, required to be an integer type, with the
sequence. The sequences min and max values default to the range
supported by the type, and they cannot be set to values exceeding that
range. The internal implementation of the sequence is not affected.
Change the serial types to create sequences of the appropriate type.
This makes sure that the min and max values of the sequence for a serial
column match the range of values supported by the table column. So the
sequence can no longer overflow the table column.
This also makes monitoring for sequence exhaustion/wraparound easier,
which currently requires various contortions to cross-reference the
sequences with the table columns they are used with.
This commit also effectively reverts the pg_sequence column reordering
in f3b421da5f, because the new seqtypid
column allows us to fill the hole in the struct and create a more
natural overall column ordering.
Reviewed-by: Steve Singer <steve@ssinger.info>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The S/390 members of the buildfarm are showing failures indicating
that they're having trouble with the rint() calls I added yesterday.
There's no good reason for that, and I wonder if it is a compiler bug
similar to the one we worked around in d9476b838. Try to fix it using
the same method as before, namely to store the result of rint() back
into a "double" variable rather than immediately converting to int64.
(This isn't entirely waving a dead chicken, since on machines with
wider-than-double float registers, the extra store forces a width
conversion. I don't know if S/390 is like that, but it seems worth
trying.)
In passing, merge duplicate ereport() calls in float8_timestamptz().
Per buildfarm.
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
Even if we don't emit definitions for SH_ALLOCATE and SH_FREE, we
still need prototypes. The user can't define them before including
simplehash.h because SH_TYPE isn't available yet.
For the allocator to be able to access private_data, it needs to
become an argument to SH_CREATE. Previously we relied on callers
to set that after returning from SH_CREATE, but SH_CREATE calls
SH_ALLOCATE before returning.
Dilip Kumar, reviewed by me.
It did that to verify that the page was an overflow page rather than
anything else, but that means that checking the status of all the
overflow bits requires reading the entire index. So don't do that.
The new code validates that the page is not a primary bucket page
or bitmap page by looking at the metapage, so that using this on
large numbers of pages can be reasonably efficient.
Ashutosh Sharma, per a complaint from me, and with further
modifications by me.
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
When converting a float value to integer microseconds, we should be careful
to round the value to the nearest integer, typically with rint(); simply
assigning to an int64 variable will truncate, causing apparently off-by-one
values in cases that should work. Most places in the datetime code got
this right, but not these two.
float8_timestamptz() is new as of commit e511d878f (9.6). Previous
versions effectively depended on interval_mul() to do roundoff correctly,
which it does, so this fixes an accuracy regression in 9.6.
The problem in make_interval() dates to its introduction in 9.4. Aside
from being careful to round not truncate, let's incorporate the hours and
minutes inputs into the result with exact integer arithmetic, rather than
risk introducing roundoff error where there need not have been any.
float8_timestamptz() problem reported by Erik Nordström, though this is
not his proposed patch. make_interval() problem found by me.
Discussion: https://postgr.es/m/CAHuQZDS76jTYk3LydPbKpNfw9KbACmD=49dC4BrzHcfPv6yA1A@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
This is infrastructure for a pending patch to allow parallel bitmap
heap scans.
Dilip Kumar, reviewed (in earlier versions) by Andres Freund and
(more recently) by me. Some further renaming by me, also.
This avoids a very significant amount of buffer manager traffic and
contention when scanning hash indexes, because it's no longer
necessary to lock and pin the metapage for every scan. We do need
some way of figuring out when the cache is too stale to use any more,
so that when we lock the primary bucket page to which the cached
metapage points us, we can tell whether a split has occurred since we
cached the metapage data. To do that, we use the hash_prevblkno field
in the primary bucket page, which would otherwise always be set to
InvalidBuffer.
This patch contains code so that it will continue working (although
less efficiently) with hash indexes built before this change, but
perhaps we should consider bumping the hash version and ripping out
the compatibility code. That decision can be made later, though.
Mithun Cy, reviewed by Jesper Pedersen, Amit Kapila, and by me.
Before committing, I made a number of cosmetic changes to the last
posted version of the patch, adjusted _hash_getcachedmetap to be more
careful about order of operation, and made some necessary updates to
the pageinspect documentation and regression tests.
Before, reading pg_sequences.last_value would fail unless the user had
appropriate sequence permissions, which would make the pg_sequences view
cumbersome to use. Instead, return null instead of the real value when
there are no permissions.
From: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Shinoda, Noriyoshi <noriyoshi.shinoda@hpe.com>
The problem with the original coding here is that we might receive (and
clear) a relcache invalidation signal for the target relation down inside
one of the index_open calls we're doing. Since the target is open, we
would not drop the relcache entry, just reset its rd_indexvalid and
rd_indexlist fields. But RelationGetIndexAttrBitmap() kept going, and
would eventually cache and return potentially-obsolete attribute bitmaps.
The case where this matters is where the inval signal was from a CREATE
INDEX CONCURRENTLY telling us about a new index on a formerly-unindexed
column. (In all other cases, the lock we hold on the target rel should
prevent any concurrent change in index state.) Even just returning the
stale attribute bitmap is not such a problem, because it shouldn't matter
during the transaction in which we receive the signal. What hurts is
caching the stale data, because it can survive into later transactions,
breaking CREATE INDEX CONCURRENTLY's expectation that later transactions
will not create new broken HOT chains. The upshot is that there's a window
for building corrupted indexes during CREATE INDEX CONCURRENTLY.
This patch fixes the problem by rechecking that the set of index OIDs
is still the same at the end of RelationGetIndexAttrBitmap() as it was
at the start. If not, we loop back and try again. That's a little
more than is strictly necessary to fix the bug --- in principle, we
could return the stale data but not cache it --- but it seems like a
bad idea on general principles for relcache to return data it knows
is stale.
There might be more hazards of the same ilk, or there might be a better
way to fix this one, but this patch definitely improves matters and seems
unlikely to make anything worse. So let's push it into today's releases
even as we continue to study the problem.
Pavan Deolasee and myself
Discussion: https://postgr.es/m/CABOikdM2MUq9cyZJi1KyLmmkCereyGp5JQ4fuwKoyKEde_mzkQ@mail.gmail.com
Commit 665d1fad9 introduced rd_pkindex, and made RelationGetIndexList
responsible for updating it, but didn't bother to fix
RelationGetIndexList's header comment to say so.
If we forcibly place a Material node atop a finished subplan, we need
to move any initPlans attached to the subplan up to the Material node,
in order to keep SS_finalize_plan() happy. I'd figured this out in
commit 7b67a0a49 for the case of materializing a cursor plan, but out of
an abundance of caution, I put the initPlan movement hack at the call
site for that case, rather than inside materialize_finished_plan().
That was the wrong thing, because it turns out to also be necessary for
the only other caller of materialize_finished_plan(), ie subselect.c.
We lacked any test cases that exposed the mistake, but bug#14524 from
Wei Congrui shows that it's possible to get an initPlan reference into
the top tlist in that case too, and then SS_finalize_plan() complains.
Hence, move the hack into materialize_finished_plan().
In HEAD, also relocate some recently-added tests in subselect.sql, which
I'd unthinkingly dropped into the middle of a sequence of related tests.
Report: https://postgr.es/m/20170202060020.1400.89021@wrigleys.postgresql.org
Given a targetlist like "srf(x), f(srf(x))", split_pathtarget_at_srfs()
decided that it needed two levels of ProjectSet nodes, failing to notice
that the two SRF calls are textually equal(). Because of that, setrefs.c
would convert the upper ProjectSet's tlist to "Var1, f(Var1)" (where Var1
represents a reference to the srf(x) output of the lower ProjectSet).
This triggered an assertion in nodeProjectSet.c complaining that it found
no SRFs to evaluate, as reported by Erik Rijkers.
What we want in such a case is to evaluate srf(x) only once and use a plain
Result node to compute "Var1, f(Var1)"; that gives results similar to what
previous versions produced, whereas allowing srf(x) to be evaluated again
in an upper ProjectSet would square the number of rows emitted.
Furthermore, even if the SRF calls aren't textually identical, we want them
to be evaluated in lockstep, because that's what happened in the old
implementation. But split_pathtarget_at_srfs() got this completely wrong,
using two levels of ProjectSet for a case like "srf(x), f(srf(y))".
Hence, rewrite split_pathtarget_at_srfs() from the ground up so that it
groups SRFs according to the depth of nesting of SRFs in their arguments.
This is pretty much how we envisioned that working originally, but I blew
it when it came to implementation.
In passing, optimize the case of target == input_target, which I noticed
is not only possible but quite common.
Discussion: https://postgr.es/m/dcbd2853c05d22088766553d60dc78c6@xs4all.nl
There is no particularly good reason to limit this value to 1000,
so increase the limit to INT_MAX / 2, the same limit we use for
shared_buffers. It's not clear how much practical effect larger
settings will have, but there seems no harm in letting people try it.
Jim Nasby, less a comment change I stripped out.
Discussion: http://postgr.es/m/f6e58a22-030b-eb8a-5457-f62fb08d701c@BlueTreble.com
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Discussion: http://postgr.es/m/e2ac6c58-b93f-9dd9-f4e6-d6d30add7fdf@redhat.com
Doing so doesn't seem to be within the purpose of the per user
connection limits, and has particularly unfortunate effects in
conjunction with parallel queries.
Backpatch to 9.6 where parallel queries were introduced.
David Rowley, reviewed by Robert Haas and Albe Laurenz.
Add CatalogTupleInsertWithInfo and CatalogTupleUpdateWithInfo to let
callers use the CatalogTupleXXX abstraction layer even in cases where
we want to share the results of CatalogOpenIndexes across multiple
inserts/updates for efficiency. This finishes the job begun in commit
2f5c9d9c9, by allowing some remaining simple_heap_insert/update
calls to be replaced. The abstraction layer is now complete enough
that we don't have to export CatalogIndexInsert at all anymore.
Also, this fixes several places in which 2f5c9d9c9 introduced performance
regressions by using retail CatalogTupleInsert or CatalogTupleUpdate even
though the previous coding had been able to amortize CatalogOpenIndexes
work across multiple tuples.
A possible future improvement is to arrange for the indexing.c functions
to cache the CatalogIndexState somewhere, maybe in the relcache, in which
case we could get rid of CatalogTupleInsertWithInfo and
CatalogTupleUpdateWithInfo again. But that's a task for another day.
Discussion: https://postgr.es/m/27502.1485981379@sss.pgh.pa.us
This extends the work done in commit 2f5c9d9c9 to provide a more nearly
complete abstraction layer hiding the details of index updating for catalog
changes. That commit only invented abstractions for catalog inserts and
updates, leaving nearby code for catalog deletes still calling the
heap-level routines directly. That seems rather ugly from here, and it
does little to help if we ever want to shift to a storage system in which
indexing work is needed at delete time.
Hence, create a wrapper function CatalogTupleDelete(), and replace calls
of simple_heap_delete() on catalog tuples with it. There are now very
few direct calls of [simple_]heap_delete remaining in the tree.
Discussion: https://postgr.es/m/462.1485902736@sss.pgh.pa.us
Peter Eisentraut
Robert Haas
Tom Lane
Stephen Frost
Fujii Masao
Alvaro Herrera
Heikki Linnakangas
Simon Riggs
Andres Freund
Noah Misch
Magnus Hagander
Andrew Dunstan