Previously, CREATE TABLE IF EXIST threw an error if the schema was
nonexistent. This was done by passing 'missing_ok' to the function that
looks up the schema oid.
plpython tried to use a single cache entry for a trigger function, but it
needs a separate cache entry for each table the trigger is applied to,
because there is table-dependent data in there. This was done correctly
before 9.1, but commit 46211da1b8 broke it
by simplifying the lookup key from "function OID and triggered table OID"
to "function OID and is-trigger boolean". Go back to using both OIDs
as the lookup key. Per bug report from Sandro Santilli.
Andres Freund
In the initial implementation of plan caching, we saved the active
search_path when a plan was first cached, then reinstalled that path
anytime we needed to reparse or replan. The idea of that was to try to
reselect the same referenced objects, in somewhat the same way that views
continue to refer to the same objects in the face of schema or name
changes. Of course, that analogy doesn't bear close inspection, since
holding the search_path fixed doesn't cope with object drops or renames.
Moreover sticking with the old path seems to create more surprises than
it avoids. So instead of doing that, consider that the cached plan depends
on search_path, and force reparse/replan if the active search_path is
different than it was when we last saved the plan.
This gets us fairly close to having "transparency" of plan caching, in the
sense that the cached statement acts the same as if you'd just resubmitted
the original query text for another execution. There are still some corner
cases where this fails though: a new object added in the search path
schema(s) might capture a reference in the query text, but we'd not realize
that and force a reparse. We might try to fix that in the future, but for
the moment it looks too expensive and complicated.
When descending the tree for an insert, and there are multiple equally good
pages we could insert to, make the choice in random. Previously, we would
always choose the tuple with lowest offset number. That meant that when two
non-leaf pages overlap - in the extreme case they might have exactly the same
key - all but the first such page went unused. That wasn't optimal for space
usage; if you deleted some tuples from the non-first pages, the space would
never be reused.
With this patch, the other pages are sometimes chosen too, although there's
still a heavy bias towards low-offset tuples, so that we don't lose cache
locality when doing a lot of inserts with similar keys.
Original idea by Alexander Korotkov, although this patch version was written
by me and copy-edited by Tom Lane.
Previously, the VARIADIC labeling was effectively ignored, but now these
functions act as though the array elements had all been given as separate
arguments.
Pavel Stehule
Since 9.0, the count parameter has only limited the number of tuples
actually returned by the executor. It doesn't affect the behavior of
INSERT/UPDATE/DELETE unless RETURNING is specified, because without
RETURNING, the ModifyTable plan node doesn't return control to execMain.c
for each tuple. And we only check the limit at the top level.
While this behavioral change was unintentional at the time, discussion of
bug #6572 led us to the conclusion that we prefer the new behavior anyway,
and so we should just adjust the docs to match rather than change the code.
Accordingly, do that. Back-patch as far as 9.0 so that the docs match the
code in each branch.
This ensures that mapping of non-ascii prompts
to the correct code page occurs.
Bug report and original patch from Alexander Law,
reviewed and reworked by Noah Misch.
Backpatch to all live branches.
Tuples marked SELECT FOR UPDATE in a cluster that's later processed by
pg_upgrade would have a different infomask bit pattern than those
produced by 9.3dev; that bit pattern was being seen as "dead" by HEAD
(because they would fail the "is this tuple locked" test, and so the
visibility rules would thing they're updated, even though there's no
HEAP_UPDATED version of them). In other words, some rows could silently
disappear after pg_upgrade.
With this new definition, those tuples become visible again.
This is breakage resulting from my commit 0ac5ad5134.
This makes 9.3 -> 9.3 upgrades work when they cross the commit that
added persistent multixacts; early 9.3 pg_controldata did not have the
required oldestMultiXact line, and so would fail to upgrade.
per Bruce Momjian
The machinery around XLOG_HEAP2_CLEANUP_INFO failed
to correctly pass through the necessary information
on latestRemovedXid, avoiding cancellations in some
infrequent concurrent update/cleanup scenarios.
Backpatchable fix to 9.0
Detailed bug report and fix by Noah Misch,
backpatchable version by me.
When pg_upgrade can't find required pg_controldata information, report
_which_ cluster is failing, with this message:
The %s cluster lacks some required control information:
When we eliminated "unnecessary" wakeups of the syslogger process, we
broke size-based logfile rotation on Windows, because on that platform
data transfer is done in a separate thread. While non-Windows platforms
would recheck the output file size after every log message, Windows only
did so when the control thread woke up for some other reason, which might
be quite infrequent. Per bug #7814 from Tsunezumi. Back-patch to 9.2
where the problem was introduced.
Jeff Janes
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
When a standby server follows the master using WAL archive, and it chooses
a new timeline (recovery_target_timeline='latest'), it only fetches the
timeline history file for the chosen target timeline, not any other history
files that might be missing from pg_xlog. For example, if the current
timeline is 2, and we choose 4 as the new recovery target timeline, the
history file for timeline 3 is not fetched, even if it's part of this
server's history. That's enough for the standby itself - the history file
for timeline 4 includes timeline 3 as well - but if a cascading standby
server wants to recover to timeline 3, it needs the history file. To fix,
when a new recovery target timeline is chosen, try to copy any missing
history files from the archive to pg_xlog between the old and new target
timeline.
A second similar issue was with the WAL files. When a standby recovers from
archive, and it reaches a segment that contains a switch to a new timeline,
recovery fetches only the WAL file labelled with the new timeline's ID. The
file from the new timeline contains a copy of the WAL from the old timeline
up to the point where the switch happened, and recovery recovers it from the
new file. But in streaming replication, walsender only tries to read it
from the old timeline's file. To fix, change walsender to read it from the
new file, so that it behaves the same as recovery in that sense, and doesn't
try to open the possibly nonexistent file with the old timeline's ID.
With AtEOXact applied, --single-transaction makes pg_restore slower, and
has the potential to require lock table configuration, so remove the
argument.
Per suggestion from Tom.
Originally we didn't bother to mark FuncExprs with any indication whether
VARIADIC had been given in the source text, because there didn't seem to be
any need for it at runtime. However, because we cannot fold a VARIADIC ANY
function's arguments into an array (since they're not necessarily all the
same type), we do actually need that information at runtime if VARIADIC ANY
functions are to respond unsurprisingly to use of the VARIADIC keyword.
Add the missing field, and also fix ruleutils.c so that VARIADIC ANY
function calls are dumped properly.
Extracted from a larger patch that also fixes concat() and format() (the
only two extant VARIADIC ANY functions) to behave properly when VARIADIC is
specified. This portion seems appropriate to review and commit separately.
Pavel Stehule
Remove duplicate implementations of catalog munging and miscellaneous
privilege checks. Instead rely on already existing data in
objectaddress.c to do the work.
Author: KaiGai Kohei, changes by me
Reviewed by: Robert Haas, Álvaro Herrera, Dimitri Fontaine
This bug goes back to the original Postgres95 sources. Its significance
to modern PG versions is marginal, since we have not used PQprintTuples()
internally in a very long time, and it doesn't seem to have ever been
documented either. Still, it *is* exposed to client apps, so somebody
out there might possibly be using it.
Xi Wang
AtEOXact_RelationCache() scanned the entire relation cache at the end of
any transaction that created a new relation or assigned a new relfilenode.
Thus, clients such as pg_restore had an O(N^2) performance problem that
would start to be noticeable after creating 10000 or so tables. Since
typically only a small number of relcache entries need any cleanup, we
can fix this by keeping a small list of their OIDs and doing hash_searches
for them. We fall back to the full-table scan if the list overflows.
Ideally, the maximum list length would be set at the point where N
hash_searches would cost just less than the full-table scan. Some quick
experimentation says that point might be around 50-100; I (tgl)
conservatively set MAX_EOXACT_LIST = 32. For the case that we're worried
about here, which is short single-statement transactions, it's unlikely
there would ever be more than about a dozen list entries anyway; so it's
probably not worth being too tense about the value.
We could avoid the hash_searches by instead keeping the target relcache
entries linked into a list, but that would be noticeably more complicated
and bug-prone because of the need to maintain such a list in the face of
relcache entry drops. Since a relcache entry can only need such cleanup
after a somewhat-heavyweight filesystem operation, trying to save a
hash_search per cleanup doesn't seem very useful anyway --- it's the scan
over all the not-needing-cleanup entries that we wish to avoid here.
Jeff Janes, reviewed and tweaked a bit by Tom Lane
Bruce Momjian
Tom Lane
Robert Haas
Heikki Linnakangas
Magnus Hagander
Andrew Dunstan
Alvaro Herrera
Simon Riggs
Peter Eisentraut