Commit f0e44751d7 implemented table
partitioning, but failed to mention the "no row movement"
restriction in the documentation. Fix that and a few other issues.
Amit Langote, with some additional wordsmithing by me.
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
The docs failed to explain that LIKE INCLUDING INDEXES would not preserve
the names of indexes and associated constraints. Also, it wasn't mentioned
that EXCLUDE constraints would be copied by this option. The latter
oversight seems enough of a documentation bug to justify back-patching.
In passing, do some minor copy-editing in the same area, and add an entry
for LIKE under "Compatibility", since it's not exactly a faithful
implementation of the standard's feature.
Discussion: <20160728151154.AABE64016B@smtp.hushmail.com>
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
The code that estimates what parallel degree should be uesd for the
scan of a relation is currently rather stupid, so add a parallel_degree
reloption that can be used to override the planner's rather limited
judgement.
Julien Rouhaud, reviewed by David Rowley, James Sewell, Amit Kapila,
and me. Some further hacking by me.
Get rid of the false implication that PRIMARY KEY is exactly equivalent to
UNIQUE + NOT NULL. That was more-or-less true at one time in our
implementation, but the standard doesn't say that, and we've grown various
features (many of them required by spec) that treat a pkey differently from
less-formal constraints. Per recent discussion on pgsql-general.
I failed to resist the temptation to do some other wordsmithing in the
same area.
These were discussed in three different sections of the manual, which
unsurprisingly had diverged over time; and the descriptions of individual
variables lacked stylistic consistency even within each section (and
frequently weren't in very good English anyway). Clean up the mess, and
remove some of the redundant information in hopes that future additions
will be less likely to re-introduce inconsistency. For instance I see
no need for maintenance.sgml to include its very own list of all the
autovacuum storage parameters, especially since that list was already
incomplete.
The documentation for the autovacuum_multixact_freeze_max_age and
autovacuum_freeze_max_age relation level parameters contained:
"Note that while you can set autovacuum_multixact_freeze_max_age very
small, or even zero, this is usually unwise since it will force frequent
vacuuming."
which hasn't been true since these options were made relation options,
instead of residing in the pg_autovacuum table (834a6da4f7).
Remove the outdated sentence. Even the lowered limits from 2596d70 are
high enough that this doesn't warrant calling out the risk in the CREATE
TABLE docs.
Per discussion with Tom Lane and Alvaro Herrera
Discussion: 26377.1443105453@sss.pgh.pa.us
Backpatch: 9.0- (in parts)
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
This is useful to control autovacuum log volume, for situations where
monitoring only a set of tables is necessary.
Author: Michael Paquier
Reviewed by: A team led by Naoya Anzai (also including Akira Kurosawa,
Taiki Kondo, Huong Dangminh), Fujii Masao.
Previously, CHECK constraints of the same scope were checked in whatever
order they happened to be read from pg_constraint. (Usually, but not
reliably, this would be creation order for domain constraints and reverse
creation order for table constraints, because of differing implementation
details.) Nondeterministic results of this sort are problematic at least
for testing purposes, and in discussion it was agreed to be a violation of
the principle of least astonishment. Therefore, borrow the principle
already established for triggers, and apply such checks in name order
(using strcmp() sort rules). This lets users control the check order
if they have a mind to.
Domain CHECK constraints still follow the rule of checking lower nested
domains' constraints first; the name sort only applies to multiple
constraints attached to the same domain.
In passing, I failed to resist the temptation to wordsmith a bit in
create_domain.sgml.
Apply to HEAD only, since this could result in a behavioral change in
existing applications, and the potential regression test failures have
not actually been observed in our buildfarm.
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
DocBook XML is superficially compatible with DocBook SGML but has a
slightly stricter DTD that we have been violating in a few cases.
Although XSLT doesn't care whether the document is valid, the style
sheets don't necessarily process invalid documents correctly, so we need
to work toward fixing this.
This first commit moves the indexterms in refentry elements to an
allowed position. It has no impact on the output.
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
Mention that CREATE TABLE LIKE INCLUDING DEFAULTS creates a link between
the original and new tables if a default function modifies the database,
like nextval().
Previously, arbitray system columns could be mentioned in table
constraints, but they were not correctly checked at runtime, because
the values weren't actually set correctly in the tuple. Since it
seems easy enough to initialize the table OID properly, do that,
and continue allowing that column, but disallow the rest unless and
until someone figures out a way to make them work properly.
No back-patch, because this doesn't seem important enough to take the
risk of destabilizing the back branches. In fact, this will pose a
dump-and-reload hazard for those upgrading from previous versions:
constraints that were accepted before but were not correctly enforced
will now either be enforced correctly or not accepted at all. Either
could result in restore failures, but in practice I think very few
users will notice the difference, since the use case is pretty
marginal anyway and few users will be relying on features that have
not historically worked.
Amit Kapila, reviewed by Rushabh Lathia, with doc changes by me.
The reason this wasn't supported before was that GiST indexes need an
increasing sequence to detect concurrent page-splits. In a regular WAL-
logged GiST index, the LSN of the page-split record is used for that
purpose, and in a temporary index, we can get away with a backend-local
counter. Neither of those methods works for an unlogged relation.
To provide such an increasing sequence of numbers, create a "fake LSN"
counter that is saved and restored across shutdowns. On recovery, unlogged
relations are blown away, so the counter doesn't need to survive that
either.
Jeevan Chalke, based on discussions with Robert Haas, Tom Lane and me.
The initially implemented syntax, "CHECK NO INHERIT (expr)" was not
deemed very good, so switch to "CHECK (expr) NO INHERIT" instead. This
way it looks similar to SQL-standards compliant constraint attribute.
Backport to 9.2 where the new syntax and feature was introduced.
Per discussion.
Previously, when executing an ON UPDATE SET NULL or SET DEFAULT action for
a multicolumn MATCH SIMPLE foreign key constraint, we would set only those
referencing columns corresponding to referenced columns that were changed.
This is what the SQL92 standard said to do --- but more recent versions
of the standard say that all referencing columns should be set to null or
their default values, no matter exactly which referenced columns changed.
At least for SET DEFAULT, that is clearly saner behavior. It's somewhat
debatable whether it's an improvement for SET NULL, but it appears that
other RDBMS systems read the spec this way. So let's do it like that.
This is a release-notable behavioral change, although considering that
our documentation already implied it was done this way, the lack of
complaints suggests few people use such cases.
Aside from adjusting the documentation to say that these are deprecated,
we now report a warning (not an error) for use of GLOBAL, since it seems
fairly likely that we might change that to request SQL-spec-compliant temp
table behavior in the foreseeable future. Although our handling of LOCAL
is equally nonstandard, there is no evident interest in ever implementing
SQL modules, and furthermore some other products interpret LOCAL as
behaving the same way we do. So no expectation of change and no warning
for LOCAL; but it still seems a good idea to deprecate writing it.
Noah Misch
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
The only reason this didn't work before was that parserOpenTable()
rejects composite types. So use relation_openrv() directly and
manually do the errposition() setup that parserOpenTable() does.
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly. This turned out to be very confusing, because it has
nothing to do with the INHERITS feature. So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
There is what may actually be a mistake in our markup. The problem is
in a situation like
<para>
<command>FOO</command> is ...
there is strictly speaking a line break before "FOO". In the HTML
output, this does not appear to be a problem, but in the man page
output, this shows up, so you get double blank lines at odd places.
So far, we have attempted to work around this with an XSL hack, but
that causes other problems, such as creating run-ins in places like
<acronym>SQL</acronym> <command>COPY</command>
So fix the problem properly by removing the extra whitespace. I only
fixed the problems that affect the man page output, not all the
places.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This is how it was documented originally, but several years ago somebody
decided that DEFAULT isn't a type of constraint. Well, the grammar thinks
it is. The documentation was wrong in two ways: it alleged that DEFAULT
had to appear before any other kind of constraint, and it alleged that you
can't prefix a DEFAULT clause with a "CONSTRAINT name" clause, when in fact
you can. (The latter behavior probably isn't SQL-standard, but our grammar
has always allowed it.)
This patch responds to Fujii Masao's observation that the ALTER TABLE
documentation mistakenly implied that you couldn't include DEFAULT in
ALTER TABLE ADD COLUMN; though this isn't the way he proposed fixing it.
Peter Eisentraut
Robert Haas
Simon Riggs
Tom Lane
Teodor Sigaev
Andres Freund
Alvaro Herrera
Bruce Momjian
Heikki Linnakangas