Now that attcompression is just a char, there's a lot of wasted
padding space after it. Move it into the group of char-wide
columns to save a net of 4 bytes per pg_attribute entry. While
we're at it, swap the order of attstorage and attalign to make for
a more logical grouping of these columns.
Also re-order actions in related code to match the new field ordering.
This patch also fixes one outright bug: equalTupleDescs() failed to
compare attcompression. That could, for example, cause relcache
reload to fail to adopt a new value following a change.
Michael Paquier and Tom Lane, per a gripe from Andres Freund.
Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de
Not much to say here: does what it says on the tin.
We steal a previously-always-zero bit from the nextOffset
field of leaf index tuples in order to track whether there
is a nulls bitmap. Otherwise it works about like included
columns in other index types.
Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova,
and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
According to the documentation, the attType passed to the opclass
config function (and also relied on by the core code) is the type
of the heap column or expression being indexed. But what was
actually being passed was the type stored for the index column.
This made no difference for user-defined SP-GiST opclasses,
because we weren't allowing the STORAGE clause of CREATE OPCLASS
to be used, so the two types would be the same. But it's silly
not to allow that, seeing that the built-in poly_ops opclass
has a different value for opckeytype than opcintype, and that if you
want to do lossy storage then the types must really be different.
(Thus, user-defined opclasses doing lossy storage had to lie about
what type is in the index.) Hence, remove the restriction, and make
sure that we use the input column type not opckeytype where relevant.
For reasons of backwards compatibility with existing user-defined
opclasses, we can't quite insist that the specified leafType match
the STORAGE clause; instead just add an amvalidate() warning if
they don't match.
Also fix some bugs that would only manifest when trying to return
index entries when attType is different from attLeafType. It's not
too surprising that these have not been reported, because the only
usual reason for such a difference is to store the leaf value
lossily, rendering index-only scans impossible.
Add a src/test/modules module to exercise cases where attType is
different from attLeafType and yet index-only scan is supported.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
The existing convention in SP-GiST is that any pass-by-value datatype
is stored in Datum representation, i.e. it's of width sizeof(Datum)
even when typlen is less than that. This is okay, or at least it's
too late to change it, for prefix datums and node-label datums in inner
(upper) tuples. But it's problematic for leaf datums, because we'd
prefer those to be stored in Postgres' standard on-disk representation
so that we can easily extend leaf tuples to carry additional "included"
columns.
I believe, however, that we can get away with just up and changing that.
This would be an unacceptable on-disk-format break, but there are two
big mitigating factors:
1. It seems quite unlikely that there are any SP-GiST opclasses out
there that use pass-by-value leaf datatypes. Certainly none of the
ones in core do, nor has codesearch.debian.net heard of any. Given
what SP-GiST is good for, it's hard to conceive of a use-case where
the leaf-level values would be both small and fixed-width. (As an
example, if you wanted to index text values with the leaf level being
just a byte, then every text string would have to be represented
with one level of inner tuple per preceding byte, which would be
horrendously space-inefficient and slow to access. You always want
to use as few inner-tuple levels as possible, leaving as much as
possible in the leaf values.)
2. Even granting that you have such an index, this change only
breaks things on big-endian machines. On little-endian, the high
order bytes of the Datum format will now just appear to be alignment
padding space.
So, change the code to store pass-by-value leaf datums in their
usual on-disk form. Inner-tuple datums are not touched.
This is extracted from a larger patch that intends to add support for
"included" columns. I'm committing it separately for visibility in
our commit logs.
Pavel Borisov and Tom Lane, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
This reworks the reloption parsing and build of a couple of index AMs by
creating new structures for each index AM's options. This split was
already done for BRIN, GIN and GiST (which actually has a fillfactor
parameter), but not for hash, B-tree and SPGiST which relied on
StdRdOptions due to an overlap with the default option set.
This saves a couple of bytes for rd_options in each relcache entry with
indexes making use of relation options, and brings more consistency
between all index AMs. While on it, add a couple of AssertMacro() calls
to make sure that utility macros to grab values of reloptions are used
with the expected index AM.
Author: Nikolay Shaplov
Reviewed-by: Amit Langote, Michael Paquier, Álvaro Herrera, Dent John
Discussion: https://postgr.es/m/4127670.gFlpRb6XCm@x200m
This commit improves subject in two ways:
* It removes ugliness of 02f90879e7, which stores distance values and null
flags in two separate arrays after GISTSearchItem struct. Instead we pack
both distance value and null flag in IndexOrderByDistance struct. Alignment
overhead should be negligible, because we typically deal with at most few
"col op const" expressions in ORDER BY clause.
* It fixes handling of "col op NULL" expression in KNN-SP-GiST. Now, these
expression are not passed to support functions, which can't deal with them.
Instead, NULL result is implicitly assumed. It future we may decide to
teach support functions to deal with NULL arguments, but current solution is
bugfix suitable for backpatch.
Reported-by: Nikita Glukhov
Discussion: https://postgr.es/m/826f57ee-afc7-8977-c44c-6111d18b02ec%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Currently, KNN searches were supported only by GiST. SP-GiST also capable to
support them. This commit implements that support. SP-GiST scan stack is
replaced with queue, which serves as stack if no ordering is specified. KNN
support is provided for three SP-GIST opclasses: quad_point_ops, kd_point_ops
and poly_ops (catversion is bumped). Some common parts between GiST and SP-GiST
KNNs are extracted into separate functions.
Discussion: https://postgr.es/m/570825e8-47d0-4732-2bf6-88d67d2d51c8%40postgrespro.ru
Author: Nikita Glukhov, Alexander Korotkov based on GSoC work by Vlad Sterzhanov
Review: Andrey Borodin, Alexander Korotkov
The original coding of the SP-GiST scan traversalValue feature (commit
ccd6eb49a) arranged for traversal values to be stored in the query's main
executor context. That's fine if there's only one index scan per query,
but if there are many, we have a memory leak as successive scans create
new traversal values. Fix it by creating a separate memory context for
traversal values, which we can reset during spgrescan(). Back-patch
to 9.6 where this code was introduced.
In principle, adding the traversalCxt field to SpGistScanOpaqueData
creates an ABI break in the back branches. But I (tgl) have little
sympathy for extensions including spgist_private.h, so I'm not very
worried about that. Alternatively we could stick the new field at the
end of the struct in back branches, but that has its own downsides.
Anton Dignös, reviewed by Alexander Kuzmenkov
Discussion: https://postgr.es/m/CALNdv1jb6y2Te-m8xHLxLX12RsBmZJ1f4hESX7J0HjgyOhA9eA@mail.gmail.com
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Previously, only IndexTuple format was supported for the output data of
an index-only scan. This is fine for btree, which is just returning a
verbatim index tuple anyway. It's not so fine for SP-GiST, which can
return reconstructed data that's much larger than a page.
To fix, extend the index AM API so that index-only scan data can be
returned in either HeapTuple or IndexTuple format. There's other ways
we could have done it, but this way avoids an API break for index AMs
that aren't concerned with the issue, and it costs little except a couple
more fields in IndexScanDescs.
I changed both GiST and SP-GiST to use the HeapTuple method. I'm not
very clear on whether GiST can reconstruct data that's too large for an
IndexTuple, but that seems possible, and it's not much of a code change to
fix.
Per a complaint from Vik Fearing. Reviewed by Jason Li.
Discussion: https://postgr.es/m/49527f79-530d-0bfe-3dad-d183596afa92@2ndquadrant.fr
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
On some platforms, notably ARM and PowerPC, 'char' is unsigned by
default. This fixes an assertion failure at WAL replay on such platforms.
Reported by Noah Misch. Backpatch to 9.5, where this was broken.
SP-GiST initialized an all-zeros page at vacuum, but that was not
WAL-logged, which is not safe. You might get a torn page write, when it gets
flushed to disk, and end-up with a half-initialized index page. To fix,
leave it in the all-zeros state, and add it to the FSM. It will be
initialized when reused. Also don't set the page-deleted flag when recycling
an empty page. That was also not WAL-logged, and a torn write of that would
cause the page to have an invalid checksum.
Backpatch to 9.2, where SP-GiST indexes were added.
... which is the usual convention among AMs, so that pg_filedump and
similar utilities can tell apart pages of different AMs. It was also
the intent of the original code, but I failed to realize that alignment
considerations would move the whole thing to the previous-to-last word
in the page.
The new definition of the associated macro makes surrounding code a bit
leaner, too.
Per note from Heikki at
http://www.postgresql.org/message-id/546A16EF.9070005@vmware.com
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
The way the code was written, the padding was copied from uninitialized
memory areas.. Because the structs are local variables in the code where
the WAL records are constructed, making them larger and zeroing the padding
bytes would not make the code very pretty, so rather than fixing this
directly by zeroing out the padding bytes, it seems more clear to not try to
align the tuples in the WAL records. The redo functions are taught to copy
the tuple header to a local variable to avoid unaligned access.
Stable-branches have the same problem, but we can't change the WAL format
there, so fix in master only. Reading a few random extra bytes at the stack
is harmless in practice, so it's not worth crafting a different
back-patchable fix.
Per reports from Kevin Grittner and Andres Freund, using clang static
analyzer and Valgrind, respectively.
SP-GiST's original scheme for avoiding deadlocks during concurrent index
insertions doesn't work, as per report from Hailong Li, and there isn't any
evident way to make it work completely. We could possibly lock individual
inner tuples instead of their whole pages, but preliminary experimentation
suggests that the performance penalty would be huge. Instead, if we fail
to get a buffer lock while descending the tree, just restart the tree
descent altogether. We keep the old tuple positioning rules, though, in
hopes of reducing the number of cases where this can happen.
Teodor Sigaev, somewhat edited by Tom Lane
The correct test for whether a redirection tuple is removable is whether
tuple's xid < RecentGlobalXmin, not OldestXmin; the previous coding
failed to protect index searches being done in concurrent transactions that
have no XID. This mirrors the recent fix in btree's page recycling logic
made in commit d3abbbebe5.
Also, WAL-log the newest XID of any removed redirection tuple on an index
page, and apply ResolveRecoveryConflictWithSnapshot during InHotStandby WAL
replay. This protects against concurrent Hot Standby transactions possibly
needing to see the redirection tuple(s).
Per my query of 2012-03-12 and subsequent discussion.
This patch fixes the other major compatibility-breaking limitation of
SPGiST, that it didn't store anything for null values of the indexed
column, and so could not support whole-index scans or "x IS NULL"
tests. The approach is to create a wholly separate search tree for
the null entries, and use fixed "allTheSame" insertion and search
rules when processing this tree, instead of calling the index opclass
methods. This way the opclass methods do not need to worry about
dealing with nulls.
Catversion bump is for pg_am updates as well as the change in on-disk
format of SPGiST indexes; there are some tweaks in SPGiST WAL records
as well.
Heavily rewritten version of a patch by Oleg Bartunov and Teodor Sigaev.
(The original also stored nulls separately, but it reused GIN code to do
so; which required undesirable compromises in the on-disk format, and
would likely lead to bugs due to the GIN code being required to work in
two very different contexts.)
The original API definition was incapable of supporting whole-index scans
because there was no way to invoke leaf-value reconstruction without
checking any qual conditions. Also, it was inefficient for
multiple-qual-condition scans because value reconstruction got done over
again for each qual condition, and because other internal work in the
consistent functions likewise had to be done for each qual. To fix these
issues, pass the whole scankey array to the opclass consistent functions,
instead of only letting them see one item at a time. (Essentially, the
loop over scankey entries is now inside the consistent functions not
outside them. This makes the consistent functions a bit more complicated,
but not unreasonably so.)
In itself this commit does nothing except save a few cycles in
multiple-qual-condition index scans, since we can't support whole-index
scans on SPGiST indexes until nulls are included in the index. However,
I consider this a must-fix for 9.2 because once we release it will get
very much harder to change the opclass API definition.
On reflection, the original name seems way too generic for a global
symbol. A quick check shows this is the only exported function name
in SP-GiST that doesn't begin with "spg" or contain "SpGist", so the
rest of them seem all right.
Operator classes can specify whether or not they support this; this
preserves the flexibility to use lossy representations within an index.
In passing, move constant data about a given index into the rd_amcache
cache area, instead of doing fresh lookups each time we start an index
operation. This is mainly to try to make sure that spgcanreturn() has
insignificant cost; I still don't have any proof that it matters for
actual index accesses. Also, get rid of useless copying of FmgrInfo
pointers; we can perfectly well use the relcache's versions in-place.
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
Bruce Momjian
Tom Lane
Michael Paquier
Alexander Korotkov
Teodor Sigaev
Robert Haas
Heikki Linnakangas
Alvaro Herrera