As in 50371df26, this is a bad idea since the callback can't really
know what error is being thrown and thus whether or not it is safe
to attempt catalog accesses. Rather than pushing said accesses into
the mainline code where they'd usually be a waste of cycles, we can
look at the query's rangetable instead.
This change does mean that we'll be printing query aliases (if any
were used) rather than the table or column's true name. But that
doesn't seem like a bad thing: it's certainly a more useful definition
in self-join cases, for instance. In any case, it seems unlikely that
any applications would be depending on this detail, so it seems safe
to change.
Patch by me. Original complaint by Andres Freund; Bharath Rupireddy
noted the connection to conversion_error_callback.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
Commit 03ffc4d6d added logic to bypass all caching behavior in
LookupOpclassInfo when CLOBBER_CACHE_ALWAYS is enabled. It doesn't
look like I stopped to think much about what that would cost, but
recent investigation shows that the cost is enormous: it roughly
doubles the time needed for cache-clobber test runs.
There does seem to be value in this behavior when trying to test
the opclass-cache loading logic itself, but for other purposes the
cost is excessive. Hence, let's back off to doing this only when
debug_invalidate_system_caches_always is at least 3; or in older
branches, when CLOBBER_CACHE_RECURSIVELY is defined.
While here, clean up some other minor issues in LookupOpclassInfo.
Re-order the code so we aren't left with broken cache entries (leading
to later core dumps) in the unlikely case that we suffer OOM while
trying to allocate space for a new entry. (That seems to be my
oversight in 03ffc4d6d.) Also, in >= v13, stop allocating one array
entry too many. That's evidently left over from sloppy reversion in
851b14b0c.
Back-patch to all supported branches, mainly to reduce the runtime
of cache-clobbering buildfarm animals.
Discussion: https://postgr.es/m/1370856.1625428625@sss.pgh.pa.us
In 741d7f104, I tried to make the reports from canceled steps come out
after the pg_cancel_backend() steps, since that was the most common
ordering before. However, that doesn't ensure that a canceled step
doesn't report even later, as shown in a recent failure on buildfarm
member idiacanthus. Rather than complicating things even more with
additional annotations, let's just force the cancel's effect to be
reported first. It's not *that* unnatural-looking.
Back-patch to v14 where these test cases appeared.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=idiacanthus&dt=2021-07-02%2001%3A40%3A04
The existing code tried to do syscache lookups in an already-failed
transaction, which is problematic to say the least. After some
consideration of alternatives, the best fix seems to be to just drop
type names from the error message altogether. The table and column
names seem like sufficient localization. If the user is unsure what
types are involved, she can check the local and remote table
definitions.
Having done that, we can also discard the LogicalRepTypMap hash
table, which had no other use. Arguably, LOGICAL_REP_MSG_TYPE
replication messages are now obsolete as well; but we should
probably keep them in case some other use emerges. (The complexity
of removing something from the replication protocol would likely
outweigh any savings anyhow.)
Masahiko Sawada and Bharath Rupireddy, per complaint from Andres
Freund. Back-patch to v10 where this code originated.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
These are the same as world and install-world respectively, but without
building or installing the documentation. There are many reasons for
wanting to be able to do this, including speed, lack of documentation
building tools, and wanting to build other formats of the documentation.
Plans for simplifying the buildfarm client code include using these
targets.
Backpatch to all live branches.
Discussion: https://postgr.es/m/6a421136-d462-b043-a8eb-e75b2861f3df@dunslane.net
Commit 4656e3d66 replaced the "#define CLOBBER_CACHE_ALWAYS"
testing mechanism with a GUC, which has been a great help for
doing cache-clobber testing in more efficient ways; but there
is a gap in the implementation. The only way to do cache-clobber
testing during an initdb run is to use the old method with #define,
because one can't set the GUC from outside. Improve this by
adding a switch to initdb for the purpose.
(Perhaps someday we should let initdb pass through arbitrary
"-c NAME=VALUE" switches. Quoting difficulties dissuaded me
from attempting that right now, though.)
Back-patch to v14 where 4656e3d66 came in.
Discussion: https://postgr.es/m/1582507.1624227029@sss.pgh.pa.us
Commit 0e69f705cc introduced code to analyze partitioned table;
however, that code fails to preserve pg_class.relhasindex correctly.
Fix by observing whether any indexes exist rather than accidentally
falling through to assuming none do.
Backpatch to 14.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CALNJ-vS1R3Qoe5t4tbzxrkpBtzRbPq1dDcW4RmA_a+oqweF30w@mail.gmail.com
The prove_installcheck recipe in src/Makefile.global.in was emitting
bogus paths for a couple of elements when used with PGXS. Here we create
a separate recipe for the PGXS case that does it correctly. We also take
the opportunity to make the make the file more readable by breaking up
the prove_installcheck and prove_check recipes across several lines, and
to remove the setting for REGRESS_SHLIB to src/test/recovery/Makefile,
which is the only set of tests that actually need it.
Backpatch to all live branches
Discussion: https://postgr.es/m/f2401388-936b-f4ef-a07c-a0bcc49b3300@dunslane.net
Until now, we didn't allow to stream the changes in logical replication
till we receive speculative confirm or the next DML change record after
speculative inserts. The reason was that we never use to process
speculative aborts but after commit 4daa140a2f it is possible to process
them so we can allow streaming once we receive speculative abort after
speculative insertion.
We decided to backpatch to 14 where the feature for streaming in progress
transactions have been introduced as this is a minor change and makes that
functionality better.
Author: Amit Kapila
Reviewed-By: Dilip Kumar
Backpatch-through: 14
Discussion: https://postgr.es/m/CAA4eK1KdqmTCtrBR6oFfGELrLLbDLDedL6zACcsUOQuTJBj1vw@mail.gmail.com
* Fix enumeration of the multirange operators in calc_multirangesel() and
calc_multirangesel() switches.
* Add more regression tests for matching to empty ranges/multiranges.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/c5269c65-f967-77c5-ff7c-15e621c47f6a%40gmail.com
Author: Alexander Korotkov
Backpatch-through: 14, where multiranges were introduced
The original coding required that PQpipelineSync had been called before
the first call to PQgetResult, and failure to do that would result in an
unexpected NULL result being returned. Fix by setting the right state
when a query is sent, rather than leaving it unchanged and having
PQpipelineSync apply the necessary state change.
A new test case to verify the behavior is added, which relies on the new
PQsendFlushRequest() function added by commit a7192326c7.
Backpatch to 14, where pipeline mode was added.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/boris.20210616110321@codesynthesis.com
This new libpq function allows the application to send an 'H' message,
which instructs the server to flush its outgoing buffer.
This hasn't been needed so far because the Sync message already requests
a buffer; and I failed to realize that this was needed in pipeline mode
because PQpipelineSync also causes the buffer to be flushed. However,
sometimes it is useful to request a flush without establishing a
synchronization point.
Backpatch to 14, where pipeline mode was introduced in libpq.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106252350.t76x73nt643j@alvherre.pgsql
Commit efbfb6424 added logic for reporting exactly which existing
partition conflicts when complaining that a new hash partition's
modulus isn't compatible with the existing ones. However, it
misunderstood the partitioning data structure, and would select
the wrong partition in some cases, or crash outright due to fetching
a bogus table OID in other cases.
Per bug #17076 from Alexander Lakhin. Fix by Amit Langote;
some further work on the code comments by me.
Discussion: https://postgr.es/m/17076-89a16ae835d329b9@postgresql.org
Causing a core dump on out-of-memory seems pretty unfriendly,
and surely is far outside the expected behavior of a general-purpose
library. Just print an error message (as we did already) and return.
These functions unfortunately don't have an error return convention,
but code using them is probably just looking for a quick-n-dirty
print method and wouldn't bother to check anyway.
Although these functions are semi-deprecated, it still seems
appropriate to back-patch this. In passing, also back-patch
b90e6cef1, just to reduce cosmetic differences between the
branches.
Discussion: https://postgr.es/m/3122443.1624735363@sss.pgh.pa.us
Instead use the common/int.h functions to check for integer overflow
in a more C-standard-compliant fashion. This is motivated by recent
failures on buildfarm member moonjelly, where it appears that
development-tip gcc is optimizing without regard to the -fwrapv
switch. Presumably that's a gcc bug that will be fixed soon, but
we might as well install cleaner coding here rather than wait.
(This does not address the question of whether we'll ever be able
to get rid of using -fwrapv. Testing shows that this spot is the
only place where doing so creates visible regression test failures,
but unfortunately that proves very little.)
Back-patch to v12. The common/int.h functions exist in v11, but
that branch doesn't use them in any client-side code. I judge
that this case isn't interesting enough in the real world to take
even a small risk of issues from being the first such use.
Tom Lane and Fabien Coelho
Discussion: https://postgr.es/m/73927.1624815543@sss.pgh.pa.us
We were using RelationGetIndexList() to update the relation's replica
identity index but instead, we can directly use RelationGetReplicaIndex()
which uses the same functionality. This is a minor code readability
improvement.
Author: Japin Li
Reviewed-By: Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/4C99A862-69C8-431F-960A-81B1151F1B89@enterprisedb.com
When we cannot immediately acquire XactSLRULock in exclusive mode at
commit time, we add ourselves to a list of processes that need their XIDs
status update. We do this if the clog page where we need to update the
current transaction status is the same as the group leader's clog page,
otherwise, we allow the caller to clear it by itself. Now, when we can't
add ourselves to any group, we were not clearing the current proc if it
has already become a member of some group which was leading to an
assertion failure when the same proc was assigned to another backend after
the current backend exits.
Reported-by: Alexander Lakhin
Bug: 17072
Author: Amit Kapila
Tested-By: Alexander Lakhin
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/17072-2f8764857ef2c92a@postgresql.org
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
copy_data is not a supported option with this sub-command of ALTER
SUBSCRIPTION, which would not make a variable related to it initialized
after parsing the option set in DefElems. A refresh could then refer to
it.
Author: Ranier Vilela
Reviewed-by: Peter Smith
Discussion: https://postgr.es/m/CAEudQAp5P8nr=ze2Gv=BMj=DJFZnrvendZCZcC-fos3QiDe2sg@mail.gmail.com
83158f7 has improved index_set_state_flags() so as it is possible to use
transactional updates when updating pg_index state flags, but there was
not really a test case which stressed directly the possibility it fixed.
This commit adds such a test, using a predicate that looks valid in
appearance but calls a stable function.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/9b905019-5297-7372-0ad2-e1a4bb66a719@postgrespro.ru
Backpatch-through: 9.6
specscanner.l leaked a kilobyte of memory per token of the spec file.
Apparently somebody thought that the introductory code block would be
executed once; but it's once per yylex() call.
A couple of functions in isolationtester.c leaked small amounts of
memory due to not bothering to free one-time allocations. Might
as well improve these so that valgrind gives this program a clean
bill of health. Also get rid of an ugly static variable.
Coverity complained about one of the one-time leaks, which led me
to try valgrind'ing isolationtester, which led to discovery of the
larger leak.
Commit c0cb87fbb unwisely introduced a dependency on the StringInfo
machinery in fe-connect.c. We must not use that in libpq, because
it will do a summary exit(1) if it hits OOM, and that is not
appropriate behavior for a general-purpose library. The goal of
allowing arbitrary line lengths in service files doesn't seem like
it's worth a lot of effort, so revert back to the previous method
of using a stack-allocated buffer and failing on buffer overflow.
This isn't an exact revert though. I kept that patch's refactoring
to have a single exit path, as that seems cleaner than having each
error path know what to do to clean up. Also, I made the fixed-size
buffer 1024 bytes not 256, just to push off the need for an expandable
buffer some more.
There is more to do here; in particular the lack of any mechanical
check for this type of mistake now seems pretty hazardous. But this
fix gets us back to the level of robustness we had in v13, anyway.
Discussion: https://postgr.es/m/daeb22ec6ca8ef61e94d766a9b35fb03cabed38e.camel@vmware.com
The version string is grabbed from PACKAGE_VERSION in pg_config.h in the
MSVC build since 8f4fb4c6, but an error message referenced a variable
that existed before that. This had no consequences except if one messes
up enough with the version number of the build.
Author: Anton Voloshin
Discussion: https://postgr.es/m/af79ee1b-9962-b299-98e1-f90a289e19e6@postgrespro.ru
Backpatch-through: 13
002_pgbench_no_server was printing some array pointers instead of the
actual contents of those arrays for the expected outputs of stdout and
stderr for a tested command. This does not add any new information that
can help with debugging as the test names allow to track failure
locations, if any.
This commit simply removes those logs as the rest of the printed
information is redundant with command_checks_all().
Per discussion with Andrew Dunstan and Álvaro Herrera.
Discussion: https://postgr.es/m/YNXNFaG7IgkzZanD@paquier.xyz
Backpatch-through: 11
It's not really necessary for this function to open or lock the
relation associated with the pg_policy entry it's modifying. The
error checks it's making on the rel are if anything counterproductive
(e.g., if we don't want to allow installation of policies on system
catalogs, here is not the place to prevent that). In particular, it
seems just wrong to insist on an ownership check. That has the net
effect of forcing people to use superuser for DROP OWNED BY, which
surely is not an effect we want. Also there is no point in rebuilding
the dependencies of the policy expressions, which aren't being
changed. Lastly, locking the table also seems counterproductive; it's
not helping to prevent race conditions, since we failed to re-read the
pg_policy row after acquiring the lock. That means that concurrent
DDL would likely result in "tuple concurrently updated/deleted"
errors; which is the same behavior this code will produce, with less
overhead.
Per discussion of bug #17062. Back-patch to all supported versions,
as the failure cases this eliminates seem just as undesirable in 9.6
as in HEAD.
Discussion: https://postgr.es/m/1573181.1624220108@sss.pgh.pa.us
This fixes a couple of problems within the so-said code of this commit
subject:
- Replace the use of open() with slurp_file(), fixing an issue reported
by buildfarm member fairywren whose perl installation keep around CRLF
characters, causing the matching patterns for the logs to fail.
- Remove the eval block, which is not really necessary.
This set of issues has come into light after fixing a different issue
with c13585fe, and this is wrong since this code has been introduced.
Reported-by: Andrew Dunstan, and buildfarm member fairywren
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/0f49303e-7784-b3ee-200b-cbf67be2eb9e@dunslane.net
Backpatch-through: 11
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com