In the normal configuration where GEQO_DEBUG isn't defined,
recent clang versions have started to complain that geqo_main.c
accumulates the edge_failures count but never does anything
with it. As a minimal back-patchable fix, insert a void cast
to silence this warning. (I'd speculated about ripping out the
GEQO_DEBUG logic altogether, but I don't think we'd wish to
back-patch that.)
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
an annoying compiler warning but changes no behavior. Hence,
back-patch all the way to 9.2.
Discussion: https://postgr.es/m/CA+hUKGLTSZQwES8VNPmWO9AO0wSeLt36OCPDAZTccT1h7Q7kTQ@mail.gmail.com
In sort_inner_and_outer we iterate a list of PathKey elements, but the
variable is declared as (List *). This mistake is benign, because we
only pass the pointer to lcons() and never dereference it.
This exists since ~2004, but it's confusing. So fix and backpatch to all
supported branches.
Backpatch-through: 10
Discussion: https://postgr.es/m/bf3a6ea1-a7d8-7211-0669-189d5c169374%40enterprisedb.com
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
In libpq and ecpglib, multiple threads can concurrently enter the
initialization logic for message localization. Since we set the
its-done flag before actually doing the work, it'd be possible
for some threads to reach gettext() before anyone has called
bindtextdomain(). Barring bugs in libintl itself, this would not
result in anything worse than failure to localize some early
messages. Nonetheless, it's a bug, and an easy one to fix.
Noted while investigating bug #17299 from Clemens Zeidler
(much thanks to Liam Bowen for followup investigation on that).
It currently appears that that actually *is* a bug in libintl itself,
but that doesn't let us off the hook for this bit.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/17299-7270741958c0b1ab@postgresql.org
Discussion: https://postgr.es/m/CAE7q7Eit4Eq2=bxce=Fm8HAStECjaXUE=WBQc-sDDcgJQ7s7eg@mail.gmail.com
While individual logical rewrite files were synced to disk, the directory was
not. On some filesystems that could lead to loosing directory entries after a
crash.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/867F2E29-2782-4869-970E-B984C6D35A8F@amazon.com
Backpatch: 10-
The logic in charge of writing commit timestamps (enabled with
track_commit_timestamp) for subtransactions had a one-bug bug,
where it would be possible that commit timestamps go missing for the
last subtransaction committed.
While on it, simplify a bit the iteration logic in the loop writing the
commit timestamps, as per suggestions from Kyotaro Horiguchi and Tom
Lane, so as some variable initializations are not part of the loop
itself.
Issue introduced in 73c986a.
Analyzed-by: Alex Kingsborough
Author: Alex Kingsborough, Kyotaro Horiguchi
Discussion: https://postgr.es/m/73A66172-4050-4F2A-B7F1-13508EDA2144@amazon.com
Backpatch-through: 10
Commits 6c4a8903b et al. had a couple of deficiencies:
* The logic I added to Cluster::start to see if a PID file is present
could be fooled by a stale PID file left over from a previous
postmaster. To fix, if we're not sure whether we expect to find a
running postmaster or not, validate the PID using "kill 0".
* 017_shm.pl has a loop in which it just issues repeated Cluster::start
calls; this will fail if some invocation fails but leaves self->_pid
set. Per buildfarm results, the above fix is not enough to make this
safe: we might have "validated" a PID for a postmaster that exits
immediately after we look. Hence, match each failed start call with
a stop call that will get us back to the self->_pid == undef state.
Add a fail_ok option to Cluster::stop to make this work.
Discussion: https://postgr.es/m/CA+hUKGKV6fOHvfiPt8=dOKzvswjAyLoFoJF1iQXMNpi7+hD1JQ@mail.gmail.com
Since the test requires reproducible behavior from VACUUM, and since
DISABLE_PAGE_SKIPPING doesn't actually disable all forms of page
skipping, let's use a temporary table to avoid contention.
Back-patch to 12, like commit 3414099c.
Discussion: https://postgr.es/m/20220120052404.sonrhq3f3qgplpzj%40alap3.anarazel.de
"pg_ctl start" might start a new postmaster and then return failure
anyway, for example if PGCTLTIMEOUT is exceeded. If there is a
postmaster there, it's still incumbent on us to shut it down at
script end, so check for the PID file even though we are about
to fail.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/647439.1642622744@sss.pgh.pa.us
Where we test vacuum_truncate's effects, sometimes this is failing to
truncate as expected on the build farm. That could be explained by page
skipping, so disable it explicitly, with the theory that commit fe246d1c
didn't go far enough.
Back-patch to 12, where the vacuum_truncate tests were added.
Discussion: https://postgr.es/m/CA%2BhUKGLT2UL5_JhmBzUgkdyKfc%3D5J-gJSQJLysMs4rqLUKLAzw%40mail.gmail.com
It seems highly unlikely that gettext() can be relied on to be
async-signal-safe. psql used to understand that, but someone got
it wrong long ago in the src/bin/scripts/ version of handle_sigint,
and then the bad idea was perpetuated when those two versions were
unified into src/fe_utils/cancel.c.
I'm unsure why there have not been field complaints about this
... maybe gettext() is signal-safe once it's translated at least
one message? But we have no business assuming any such thing.
In cancel.c (v13 and up), I preserved our ability to localize
"Cancel request sent" messages by invoking gettext() before
the signal handler is set up. In earlier branches I just made
src/bin/scripts/ not localize those messages, as psql did then.
(Just for extra unsafety, the src/bin/scripts/ version was
invoking fprintf() from a signal handler. Sigh.)
Noted while fixing signal-safety issues in PQcancel() itself.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
PQcancel() is supposed to be safe to call from a signal handler,
and indeed psql uses it that way. All of the library functions
it uses are specified to be async-signal-safe by POSIX ...
except for strerror. Neither plain strerror nor strerror_r
are considered safe. When this code was written, back in the
dark ages, we probably figured "oh, strerror will just index
into a constant array of strings" ... but in any locale except C,
that's unlikely to be true. Probably the reason we've not heard
complaints is that (a) this error-handling code is unlikely to be
reached in normal use, and (b) in many scenarios, localized error
strings would already have been loaded, after which maybe it's
safe to call strerror here. Still, this is clearly unacceptable.
The best we can do without relying on strerror is to print the
decimal value of errno, so make it do that instead. (This is
probably not much loss of user-friendliness, given that it is
hard to get a failure here.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Commit 7745bc352 intended to ensure that whole-row Vars would be
printed with "::type" decoration in all contexts where plain
"var.*" notation would result in star-expansion, notably in
ROW() and VALUES() constructs. However, it missed the case of
INSERT with a single-row VALUES, as reported by Timur Khanjanov.
Nosing around ruleutils.c, I found a second oversight: the
code for RowCompareExpr generates ROW() notation without benefit
of an actual RowExpr, and naturally it wasn't in sync :-(.
(The code for FieldStore also does this, but we don't expect that
to generate strictly parsable SQL anyway, so I left it alone.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/efaba6f9-4190-56be-8ff2-7a1674f9194f@intrans.baku.az
I had a brain fade in commit d32899157, and used 2:30AM as the
example timestamp for both spring-forward and fall-back cases.
But it's not actually ambiguous at all in the fall-back case,
because that transition is from 2AM to 1AM under USA rules.
Fix the example to use 1:30AM, which *is* ambiguous.
Noted while answering a question from Aleksander Alekseev.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2191355.1641828552@sss.pgh.pa.us
If contrib/btree_gist is used to make a GIST index on a char(N)
(bpchar) column, and that column is retrieved via an index-only
scan, what came out had all trailing spaces removed. Since
that doesn't happen in any other kind of table scan, this is
clearly a bug. The cause is that gbt_bpchar_compress() strips
trailing spaces (using rtrim1) before a new index entry is made.
That was probably a good idea when this code was first written,
but since we invented index-only scans, it's not so good.
One answer could be to mark this opclass as incapable of index-only
scans. But to do so, we'd need an extension module version bump,
followed by manual action by DBAs to install the updated version
of btree_gist. And it's not really a desirable place to end up,
anyway.
Instead, let's fix the code by removing the unwanted space-stripping
action and adjusting the opclass's comparison logic to ignore
trailing spaces as bpchar normally does. This will not hinder
cases that work today, since index searches with this logic will
act the same whether trailing spaces are stored or not. It will
not by itself fix the problem of getting space-stripped results
from index-only scans, of course. Users who care about that can
REINDEX affected indexes after installing this update, to immediately
replace all improperly-truncated index entries. Otherwise, it can
be expected that the index's behavior will change incrementally as
old entries are replaced by new ones.
Per report from Alexander Lakhin. Back-patch to all supported branches.
Discussion: https://postgr.es/m/696c995b-b37f-5526-f45d-04abe713179f@gmail.com
Instead of using a hardcoded or default path to the perl file the .bat
file is a wrapper for, we use a path that means the file is found in
the same directory as the .bat file.
Patch by Anton Voloshin, slightly tweaked by me.
Backpatch to all live branches
Discussion: https://postgr.es/m/2b7a674b-5fb0-d264-75ef-ecc7a31e54f8@postgrespro.ru
We disallow altering a column datatype within a regular table,
if the table's rowtype is used as a column type elsewhere,
because we lack code to go around and rewrite the other tables.
This restriction should apply to partitioned tables as well, but it
was not checked because ATRewriteTables and ATPrepAlterColumnType
were not on the same page about who should do it for which relkinds.
Per bug #17351 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17351-6db1870f3f4f612a@postgresql.org
The link used in the documentation is dead, and the only options to have
an access to this part of the SQL specification are not free. Like any
other books referred, just remove the link to keep some neutrality but
keep its reference.
Reported-by: Erik Rijkers
Discussion: https://postgr.es/m/989abd7d-af30-ab52-1201-bf0b4f33b872@xs4all.nl
Backpatch-through: 12
Under concurrency, it is possible for two sessions to be merrily locking
and releasing a tuple and marking it again as HEAP_XMAX_INVALID all the
while a third session attempts to lock it, miserably fails at it, and
then contemplates life, the universe and everything only to eventually
fail an assertion that said bit is not set. Before SKIP LOCKED that was
indeed a reasonable expectation, but alas! commit df630b0dd5 falsified
it.
This bug is as old as time itself, and even older, if you think time
begins with the oldest supported branch. Therefore, backpatch to all
supported branches.
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Discussion: https://postgr.es/m/CANbhV-FeEwMnN8yuMyss7if1ZKjOKfjcgqB26n8pqu1e=q0ebg@mail.gmail.com
Commit 4ace45677 failed to fix the problem fully, because the
same issue of attempting to fetch a non-returnable index column
can occur when rechecking the indexqual after using a lossy index
operator. Moreover, it broke EXPLAIN for such indexquals (which
indicates a gap in our test cases :-().
Revert the code changes of 4ace45677 in favor of adding a new field
to struct IndexOnlyScan, containing a version of the indexqual that
can be executed against the index-returned tuple without using any
non-returnable columns. (The restrictions imposed by check_index_only
guarantee this is possible, although we may have to recompute indexed
expressions.) Support construction of that during setrefs.c
processing by marking IndexOnlyScan.indextlist entries as resjunk
if they can't be returned, rather than removing them entirely.
(We could alternatively require setrefs.c to look up the IndexOptInfo
again, but abusing resjunk this way seems like a reasonably safe way
to avoid needing to do that.)
This solution isn't great from an API-stability standpoint: if there
are any extensions out there that build IndexOnlyScan structs directly,
they'll be broken in the next minor releases. However, only a very
invasive extension would be likely to do such a thing. There's no
change in the Path representation, so typical planner extensions
shouldn't have a problem.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
If an index has both returnable and non-returnable columns, and one of
the non-returnable columns is an expression using a Var that is in a
returnable column, then a query returning that expression could result
in an index-only scan plan that attempts to read the non-returnable
column, instead of recomputing the expression from the returnable
column as intended.
To fix, redefine the "indextlist" list of an IndexOnlyScan plan node
as containing null Consts in place of any non-returnable columns.
This solves the problem by preventing setrefs.c from falsely matching
to such entries. The executor is happy since it only cares about the
exposed types of the entries, and ruleutils.c doesn't care because a
correct plan won't reference those entries. I considered some other
ways to prevent setrefs.c from doing the wrong thing, but this way
seems good since (a) it allows a very localized fix, (b) it makes
the indextlist structure more compact in many cases, and (c) the
indextlist is now a more faithful representation of what the index AM
will actually produce, viz. nulls for any non-returnable columns.
This is easier to hit since we introduced included columns, but it's
possible to construct failing examples without that, as per the
added regression test. Hence, back-patch to all supported branches.
Per bug #17350 from Louis Jachiet.
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
Fix the code changed by commit 5c056b0c2 so that we always generate
RelabelType, not something else, for a cast to unspecified typmod.
Otherwise planner optimizations might not happen.
It appears we missed this point because the previous experiments were
done on type numeric: the parser undesirably generates a call on the
numeric() length-coercion function, but then numeric_support()
optimizes that down to a RelabelType, so that everything seems fine.
It misbehaves for types that have a non-optimized length coercion
function, such as bpchar.
Per report from John Naylor. Back-patch to all supported branches,
as the previous patch eventually was. Unfortunately, that no longer
includes 9.6 ... we really shouldn't put this type of change into a
nearly-EOL branch.
Discussion: https://postgr.es/m/CAFBsxsEfbFHEkouc+FSj+3K1sHipLPbEC67L0SAe-9-da8QtYg@mail.gmail.com
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
When writing / debugging an isolation test it sometimes is useful to see which
session holds what lock etc. To make it easier, both as part of spec files and
interactively, append the session name to application_name. Since b1907d688
application_name already contains the test name, this appends the session's
name to that.
insert-conflict-specconflict did something like this manually, which can now
be removed.
As we have done lately with other test infrastructure improvements, backpatch
this change, to make it easier to backpatch tests.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20211211012052.2blmzcmxnxqawd2z@alap3.anarazel.de
Backpatch: 10-, to make backpatching of tests easier.
We started to backpatch test infrastructure improvements more aggressively to
make it easier to backpatch test. A proposed isolationtester improvement has a
dependency on b1907d688, backpatch b1907d688 to make it easier to subsequently
backpatch the new proposed isolationtester change.
Discussion: https://postgr.es/m/861977.1639421872@sss.pgh.pa.us
Backpatch: 10-12, the commit already is in 13-HEAD
List types numeric and timestamptz, which don't seem to have ever been
included here. Restore bigint, which was no-doubt-accidentally deleted
in v12. Fix some errors, or at least obsolete usages (nobody declares
float arguments as "float8*" anymore, even though they might be that
under the hood). Re-alphabetize. Remove the seeming claim that this
is a complete list of built-in types.
Per question from Oskar Stenberg.
Discussion: https://postgr.es/m/HE1PR03MB2971DE2527ECE1E99D6C19A8F96E9@HE1PR03MB2971.eurprd03.prod.outlook.com
REINDEX CONCURRENTLY run on a toast index or a toast relation could
corrupt the target indexes rebuilt, as a backend running in parallel
that manipulates toast values would directly release the lock on the
toast relation when its local operation is done, rather than releasing
the lock once the transaction that manipulated the toast values
committed.
The fix done here is simple: we now hold a ROW EXCLUSIVE lock on the
toast relation when saving or deleting a toast value until the
transaction working on them is committed, so as a concurrent reindex
happening in parallel would be able to wait for any activity and see any
new rows inserted (or deleted).
An isolation test is added to check after the case fixed here, which is
a bit fancy by design as it relies on allow_system_table_mods to rename
the toast table and its index to fixed names. This way, it is possible
to reindex them directly without any dependency on the OID of the
underlying relation. Note that this could not use a DO block either, as
REINDEX CONCURRENTLY cannot be run in a transaction block. The test is
backpatched down to 13, where it is possible, thanks to c4a7a39, to use
allow_system_table_mods in a test suite.
Reported-by: Alexey Ermakov
Analyzed-by: Andres Freund, Noah Misch
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/17268-d2fb426e0895abd4@postgresql.org
Backpatch-through: 12
Certain settings from configuration or the Makefile infrastructure are
used by the TAP tests, but were not being set up by vcregress.pl. This
remedies those omissions. This should increase test coverage, especially
on the buildfarm.
Reviewed by Noah Misch
Discussion: https://postgr.es/m/17093da5-e40d-8335-d53a-2bd803fc38b0@dunslane.net
Backpatch to all live branches.
Further experimentation shows that commit 6051857fc is not sufficient
when using (some versions of?) OpenSSL. The reason is obscure, but
calling shutdown(socket, SD_SEND) improves matters.
Per testing by Andrew Dunstan and Alexander Lakhin.
Back-patch as before.
Discussion: https://postgr.es/m/af5e0bf3-6a61-bb97-6cba-061ddf22ff6b@dunslane.net
ssl_crl_file and ssl_crl_dir are both used to for client certificate
revocation, not server certificates. The description for the params
could be easily misread to mean the opposite however, as evidenced
by the bugreport leading to this fix. Similarly, expand sslcrl and
and sslcrldir to explicitly mention server certificates. While there
also mention sslcrldir where previously only sslcrl was discussed.
Backpatch down to v10, with the CRL dir fixes down to 14 where they
were introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211202.135441.590555657708629486.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/CABWY_HCBUCjY1EJHrEGePGEaSZ5b29apgTohCyygtsqe_ySYng@mail.gmail.com
Backpatch-through: 10
pgfdw_report_error() in postgres_fdw gets a message from PGresult or
PGconn to report an error received from a remote server. Previously
if it could get a message from neither of them, it reported empty
message unexpectedly. The cause of this issue was that pgfdw_report_error()
didn't handle properly the case where no message could be obtained
and its local variable message_primary was set to '\0'.
This commit improves pgfdw_report_error() so that it reports the message
"could not obtain ..." when it gets no message and message_primary
is set to '\0'. This is the same behavior as when message_primary is NULL.
dblink_res_error() in dblink has the same issue, so this commit also
improves it in the same way.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/477c16c8-7ea4-20fc-38d5-ed3a77ed616c@oss.nttdata.com
It turns out that this is necessary to keep Winsock from dropping any
not-yet-sent data, such as an error message explaining the reason for
process termination. It's pretty weird that the implicit close done
by the kernel acts differently from an explicit close, but it's hard
to argue with experimental results.
Independently submitted by Alexander Lakhin and Lars Kanis (comments
by me, though). Back-patch to all supported branches.
Discussion: https://postgr.es/m/90b34057-4176-7bb0-0dbb-9822a5f6425b@greiz-reinsdorf.de
Discussion: https://postgr.es/m/16678-253e48d34dc0c376@postgresql.org
The existing pg_upgrade/test.sh and the buildfarm code have been holding
the same set of SQL queries when doing cross-version upgrade tests to
adapt the objects created by the regression tests before the upgrade
(mostly, incompatible or non-existing objects need to be dropped from
the origin, perhaps re-created).
This moves all those SQL queries into a new, separate, file with a set
of \if clauses to handle the version checks depending on the old version
of the cluster to-be-upgraded.
The long-term plan is to make the buildfarm code re-use this new SQL
file, so as committers are able to fix any compatibility issues in the
tests of pg_upgrade with a refresh of the core code, without having to
poke at the buildfarm client. Note that this is only able to handle the
main regression test suite, and that nothing is done yet for contrib
modules yet (these have more issues like their database names).
A backpatch down to 10 is done, adapting the version checks as this
script needs to be only backward-compatible, so as it becomes possible
to clean up a maximum amount of code within the buildfarm client.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 10
The various ALTER OWNER routines tend to leak memory in
CurrentMemoryContext. That's not a problem when they're only called
once per command; but in this usage where we might be touching many
objects, it can amount to a serious memory leak. Fix that by running
each call in a short-lived context.
(DROP OWNED BY likely has a similar issue, except that you'll probably
run out of lock table space before noticing. REASSIGN is worth fixing
since for most non-table object types, it won't take any lock.)
Back-patch to all supported branches. Unfortunately, in the back
branches this helps to only a limited extent, since the sinval message
queue bloats quite a lot in this usage before commit 3aafc030a,
consuming memory more or less comparable to what's actually leaked.
Still, it's clearly a leak with a simple fix, so we might as well fix it.
Justin Pryzby, per report from Guillaume Lelarge
Discussion: https://postgr.es/m/CAECtzeW2DAoioEGBRjR=CzHP6TdL=yosGku8qZxfX9hhtrBB0Q@mail.gmail.com
Remove the confusing use of ORDER BY in an example materialized
view. It adds nothing to the example, but might encourage
people to follow bad practice. Clarify REFRESH MATERIALIZED
VIEW's note about whether view ordering is retained (it isn't).
Maciek Sakrejda
Discussion: https://postgr.es/m/CAOtHd0D-OvrUU0C=4hX28p4BaSE1XL78BAQ0VcDaLLt8tdUzsg@mail.gmail.com
Surround the contents with a test that the feature is enabled by
configure, to silence header checking tools on systems without GSSAPI
installed.
Backpatch to 12, where the file appeared.
Discussion: https://postgr.es/m/202111161709.u3pbx5lxdimt@alvherre.pgsql
In commit ff9f111bce I mixed up inconsistent definitions of the LSN of
the first record in a page, when the previous record ends exactly at the
page boundary. The correct LSN is adjusted to skip the WAL page header;
I failed to use that when setting XLogReaderState->overwrittenRecPtr,
so at WAL replay time VerifyOverwriteContrecord would refuse to let
replay continue past that record.
Backpatch to 10. 9.6 also contains this bug, but it's no longer being
maintained.
Discussion: https://postgr.es/m/45597.1637694259@sss.pgh.pa.us