This was broken in commit 9c7d06d606, which inadvertently gave the
wrong value to fast_forward in one StartupDecodingContext call. Fix by
flipping the value. Add a test for the obvious error, namely trying to
initialize a replication slot with an nonexistent output plugin.
While at it, move the CreateDecodingContext call earlier, so that any
errors are reported before sending the CopyBoth message.
Author: Dave Cramer <davecramer@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADK3HHLVkeRe1v4P02-5hj55H3_yJg3AEtpXyEY5T3wuzO2jSg@mail.gmail.com
Such replication slots are physical slots freshly created without WAL
being reserved, which is the default behavior, which have not been used
yet as WAL consumption resources to retain WAL. This prevents advancing
a slot to a position older than any WAL available, which could falsify
calculations for WAL segment recycling.
This also cleans up a bit the code, as ReplicationSlotRelease() would be
called on ERROR, and improves error messages.
Reported-by: Kyotaro Horiguchi
Author: Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180626071305.GH31353@paquier.xyz
Change a whole-database VACUUM into doing just pg_attribute, which is
the portion that verifies what we want it to do. The original
formulation wastes a lot of CPU time, which leads the test to fail when
runtime exceeds isolationtester timeout when it's super-slow, such as
under CLOBBER_CACHE_ALWAYS. Per buildfarm member friarbird.
It turns out that the previous shape of the test doesn't always detect
the condition it is supposed to detect (on unpatched reorderbuffer
code): the reason is that there is a good chance of encountering a
xl_running_xacts record (logged every 15 seconds) before the checkpoint
-- and because we advance the xmin when we receive that WAL record, and
we *don't* advance the xmin twice consecutively without receiving a
client message in between, that means the xmin is not advanced enough
for the tuple to be pruned from pg_attribute by VACUUM. So the test
would spuriously pass.
The reason this test deficiency wasn't detected earlier is that HOT
pruning removes the tuple anyway, even if vacuum leaves it in place, so
the test correctly fails (detecting the coding mistake), but for the
wrong reason.
To fix this mess, run the s0_get_changes step twice before vacuum
instead of once: this seems to cause the xmin to be advanced reliably,
wreaking havoc with more certainty.
Author: Arseny Sher
Discussion: https://postgr.es/m/87h8lkuxoa.fsf@ars-thinkpad
Two closely related bugs are fixed. First, xmin of logical slots was
advanced too early. During xl_running_xacts processing, xmin of the
slot was set to the oldest running xid in the record, but that's wrong:
actually, snapshots which will be used for not-yet-replayed transactions
might consider older txns as running too, so we need to keep xmin back
for them. The problem wasn't noticed earlier because DDL which allows
to delete tuple (set xmax) while some another not-yet-committed
transaction looks at it is pretty rare, if not unique: e.g. all forms of
ALTER TABLE which change schema acquire ACCESS EXCLUSIVE lock
conflicting with any inserts. The included test case (test_decoding's
oldest_xmin) uses ALTER of a composite type, which doesn't have such
interlocking.
To deal with this, we must be able to quickly retrieve oldest xmin
(oldest running xid among all assigned snapshots) from ReorderBuffer. To
fix, add another list of ReorderBufferTXNs to the reorderbuffer, where
transactions are sorted by base-snapshot-LSN. This is slightly
different from the existing (sorted by first-LSN) list, because a
transaction can have an earlier LSN but a later Xmin, if its first
record does not obtain an xmin (eg. xl_xact_assignment). Note this new
list doesn't fully replace the existing txn list: we still need that one
to prevent WAL recycling.
The second issue concerns SnapBuilder snapshots and subtransactions.
SnapBuildDistributeNewCatalogSnapshot never assigned a snapshot to a
transaction that is known to be a subtxn, which is good in the common
case that the top-level transaction already has one (no point in doing
so), but a bug otherwise. To fix, arrange to transfer the snapshot from
the subtxn to its top-level txn as soon as the kinship gets known.
test_decoding's snapshot_transfer verifies this.
Also, fix a minor memory leak: refcount of toplevel's old base snapshot
was not decremented when the snapshot is transferred from child.
Liberally sprinkle code comments, and rewrite a few existing ones. This
part is my (Álvaro's) contribution to this commit, as I had to write all
those comments in order to understand the existing code and Arseny's
patch.
Reported-by: Arseny Sher <a.sher@postgrespro.ru>
Diagnosed-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/87lgdyz1wj.fsf@ars-thinkpad
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2b, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Ability to advance both physical and logical replication slots using a
new user function pg_replication_slot_advance().
For logical advance that means records are consumed as fast as possible
and changes are not given to output plugin for sending. Makes 2nd phase
(after we reached SNAPBUILD_FULL_SNAPSHOT) of replication slot creation
faster, especially when there are big transactions as the reorder buffer
does not have to deal with data changes and does not have to spill to
disk.
Author: Petr Jelinek
Reviewed-by: Simon Riggs
The logical decoding functions do BeginInternalSubTransaction and
RollbackAndReleaseCurrentSubTransaction to clean up after themselves.
It turns out that AtEOSubXact_SPI has an unrecognized assumption that
we always need to cancel the active SPI operation in the SPI context
that surrounds the subtransaction (if there is one). That's true
when the RollbackAndReleaseCurrentSubTransaction call is coming from
the SPI-using function itself, but not when it's happening inside
some unrelated function invoked by a SPI query. In practice the
affected callers are the various PLs.
To fix, record the current subtransaction ID when we begin a SPI
operation, and clean up only if that ID is the subtransaction being
canceled.
Also, remove AtEOSubXact_SPI's assertion that it must have cleaned
up the surrounding SPI context's active tuptable. That's proven
wrong by the same test case.
Also clarify (or, if you prefer, reinterpret) the calling conventions
for _SPI_begin_call and _SPI_end_call. The memory context cleanup
in the latter means that these have always had the flavor of a matched
resource-management pair, but they weren't documented that way before.
Per report from Ben Chobot.
Back-patch to 9.4 where logical decoding came in. In principle,
the SPI changes should go all the way back, since the problem dates
back to commit 7ec1c5a86. But given the lack of field complaints
it seems few people are using internal subtransactions in this way.
So I don't feel a need to take any risks in 9.2/9.3.
Discussion: https://postgr.es/m/73FBA179-C68C-4540-9473-71E865408B15@silentmedia.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The snapshot assembly during the creation of logical slots relied
waiting for transactions in xl_running_xacts to end, by checking for
their commit/abort records. Unfortunately, despite locking, it is
possible to see an xl_running_xact record listing transactions as
ready, that have already WAL-logged an commit/abort record, as the
locking just prevents the ProcArray to be adjusted, and the commit
record has to be logged first.
That lead to either delayed or hanging snapshot creation, because
snapbuild.c would wait "forever" to see commit/abort records for some
transactions. That hang resolved only if a xl_running_xacts record
without any running transactions happened to be logged, far from
certain on a busy server.
It's impractical to prevent that via more heavyweight locking, the
likelihood of deadlocks and significantly increased contention would
be too big.
Instead change the initial snapshot creation to be solely based on
tracking the oldest running transaction via
xl_running_xacts->oldestRunningXid - that actually ends up
significantly simplifying the code. That has two disadvantages:
1) Because we cannot fully "trust" the contents of xl_running_xacts,
we cannot use it to build the initial snapshot. Instead we have to
wait twice for all running transactions to finish.
2) Previously a slot, unless the race occurred, could be created when
the all transaction perceived as running based on commit/abort
records, now we have to wait for the next xl_running_xacts record.
To address that, trigger logging new xl_running_xacts record from
within snapbuild.c exactly when necessary.
Unfortunately snabuild.c's SnapBuild is stored on disk, one of the
stupider ideas of a certain Mr Freund, so we can't change it in a
minor release. As this is going to be backpatched, we have to hack
around a bit to keep on-disk compatibility. A later commit will
rejigger that on master.
Author: Andres Freund, based on a quite different patch from Petr Jelinek
Analyzed-By: Petr Jelinek
Reviewed-By: Petr Jelinek
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backpatch: 9.4-, where logical decoding has been introduced
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
Previously if a directory had both isolationtester and plain
regression tests, they couldn't be run in parallel, because they'd
access the same files/directories. That, so far, only affected
contrib/test_decoding.
Rather than fix that locally in contrib/test_decoding, improve
pg_regress_isolation_[install]check to use separate resources from
plain regression tests.
That requires a minor change in pg_regress, namely that the
--outputdir is created if not already existing, that seems like good
idea anyway.
Use the improved helpers even where previously not used.
Author: Tom Lane and Andres Freund
Discussion: https://postgr.es/m/20170311194831.vm5ikpczq52c2drg@alap3.anarazel.de
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
Fix the tests on slow machines (per buildfarm).
Add test for dropping on error. And also try to consume real changes
from temporary slots.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
This test, just added in commit a924c327e, sometimes fails because
the old backend hasn't finished dropping the temporary replication slot
when the new backend looks. Borrow the previously-invented methodology
for waiting for the old process to disappear from pg_stat_activity.
Petr Jelinek
Discussion: https://postgr.es/m/62935e6f-4f1b-c433-e0fa-7f936a38b3e5@2ndquadrant.com
This allows creating temporary replication slots that are removed
automatically at the end of the session or on error.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
A little COLLATE "C" goes a long way.
Pavel Stehule, per suggestion from Craig Ringer
Discussion: <CAFj8pRA8nJZcozgxN=RMSqMmKuHVOkcGAAKPKdFeiMWGDSUDLA@mail.gmail.com>
Similar to 0137caf273, this makes contrib and pl tests less dependant on
hash-table order. After this commit, at least some order affecting
changes to execGrouping.c don't result in regression test changes
anymore.
Before initializing iteration over a subtransaction's changes, the last
few changes were not spilled to disk. That's correct if the transaction
didn't spill to disk, but otherwise... This bug can lead to missed or
misorderd subtransaction contents when they were spilled to disk.
Move spilling of the remaining in-memory changes to
ReorderBufferIterTXNInit(), where it can easily be applied to the top
transaction and, if present, subtransactions.
Since this code had too many bugs already, noticeably increase test
coverage.
Fixes: #14319
Reported-By: Huan Ruan
Discussion: <20160909012610.20024.58169@wrigleys.postgresql.org>
Backport: 9,4-, where logical decoding was added
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
This oversight could cause logical decoding to fail to decode an outer
transaction containing changes, if a subtransaction had an XID but no
actual changes. Per bug #14279 from Marko Tiikkaja. Patch by Marko
based on analysis by Andrew Gierth.
Discussion: <20160804191757.1430.39011@wrigleys.postgresql.org>
To ensure that "make installcheck" can be used safely against an existing
installation, we need to be careful about what global object names
(database, role, and tablespace names) we use; otherwise we might
accidentally clobber important objects. There's been a weak consensus that
test databases should have names including "regression", and that test role
names should start with "regress_", but we didn't have any particular rule
about tablespace names; and neither of the other rules was followed with
any consistency either.
This commit moves us a long way towards having a hard-and-fast rule that
regression test databases must have names including "regression", and that
test role and tablespace names must start with "regress_". It's not
completely there because I did not touch some test cases in rolenames.sql
that test creation of special role names like "session_user". That will
require some rethinking of exactly what we want to test, whereas the intent
of this patch is just to hit all the cases in which the needed renamings
are cosmetic.
There is no enforcement mechanism in this patch either, but if we don't
add one we can expect that the tests will soon be violating the convention
again. Again, that's not such a cosmetic change and it will require
discussion. (But I did use a quick-hack enforcement patch to find these
cases.)
Discussion: <16638.1468620817@sss.pgh.pa.us>
When re-reading an update involving both an old tuple and a new tuple from
disk, reorderbuffer.c was careless about whether the new tuple is suitably
aligned for direct access --- in general, it isn't. We'd missed seeing
this in the buildfarm because the contrib/test_decoding tests exercise this
code path only a few times, and by chance all of those cases have old
tuples with length a multiple of 4, which is usually enough to make the
access to the new tuple's t_len safe. For some still-not-entirely-clear
reason, however, Debian's sparc build gets a bus error, as reported by
Christoph Berg; perhaps it's assuming 8-byte alignment of the pointer?
The lack of previous field reports is probably because you need all of
these conditions to trigger a crash: an alignment-picky platform (not
Intel), a transaction large enough to spill to disk, an update within
that xact that changes a primary-key field and has an odd-length old tuple,
and of course logical decoding tracing the transaction.
Avoid the alignment assumption by using memcpy instead of fetching t_len
directly, and add a test case that exposes the crash on picky platforms.
Back-patch to 9.4 where the bug was introduced.
Discussion: <20160413094117.GC21485@msg.credativ.de>
Logical messages, added in 3fe3511d05, during decoding failed to filter
messages emitted in other databases and messages emitted "under" a
replication origin the output plugin isn't interested in.
Add tests to verify that both types of filtering actually work. While
touching message.sql remove hunk obsoleted by d25379e.
Bump XLOG_PAGE_MAGIC because xl_logical_message changed and because
3fe3511d05 had omitted doing so. 3fe3511d05 additionally didn't bump
catversion, but 7a542700d has done so since.
Author: Petr Jelinek
Reported-By: Andres Freund
Discussion: 20160406142513.wotqy3ba3kanr423@alap3.anarazel.de
API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.
Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.
(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)
Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com
When decoding the old version of an UPDATE or DELETE change, and if that
tuple was bigger than MaxHeapTupleSize, we either Assert'ed out, or
failed in more subtle ways in non-assert builds. Normally individual
tuples aren't bigger than MaxHeapTupleSize, with big datums toasted.
But that's not the case for the old version of a tuple for logical
decoding; the replica identity is logged as one piece. With the default
replica identity btree limits that to small tuples, but that's not the
case for FULL.
Change the tuple buffer infrastructure to separate allocate over-large
tuples, instead of always going through the slab cache.
This unfortunately requires changing the ReorderBufferTupleBuf
definition, we need to store the allocated size someplace. To avoid
requiring output plugins to recompile, don't store HeapTupleHeaderData
directly after HeapTupleData, but point to it via t_data; that leaves
rooms for the allocated size. As there's no reason for an output plugin
to look at ReorderBufferTupleBuf->t_data.header, remove the field. It
was just a minor convenience having it directly accessible.
Reported-By: Adam Dratwiński
Discussion: CAKg6ypLd7773AOX4DiOGRwQk1TVOQKhNwjYiVjJnpq8Wo+i62Q@mail.gmail.com
Somehow I managed to flip the order of restoring old & new tuples when
de-spooling a change in a large transaction from disk. This happens to
only take effect when a change is spooled to disk which has old/new
versions of the tuple. That only is the case for UPDATEs where he
primary key changed or where replica identity is changed to FULL.
The tests didn't catch this because either spooled updates, or updates
that changed primary keys, were tested; not both at the same time.
Found while adding tests for the following commit.
Backpatch: 9.4, where logical decoding was added
Logical decoding's reorderbuffer keeps transactions in an LSN ordered
list for efficiency. To make that's efficiently possible upper-level
xids are forced to be logged before nested subtransaction xids. That
only works though if these records are all looked at: Unfortunately we
didn't do so for e.g. row level locks, which are otherwise uninteresting
for logical decoding.
This could lead to errors like:
"ERROR: subxact logged without previous toplevel record".
It's not sufficient to just look at row locking records, the xid could
appear first due to a lot of other types of records (which will trigger
the transaction to be marked logged with MarkCurrentTransactionIdLoggedIfAny).
So invent infrastructure to tell reorderbuffer about xids seen, when
they'd otherwise not pass through reorderbuffer.c.
Reported-By: Jarred Ward
Bug: #13844
Discussion: 20160105033249.1087.66040@wrigleys.postgresql.org
Backpatch: 9.4, where logical decoding was added
Otherwise running installcheck-force on a server with
synchronous_commit=off will result in the tests failing. All the other
tests already do so...
Backpatch: 9.4, where logical decoding was added
When adding replication origins in 5aa235042, I somehow managed to set
the timestamp of decoded transactions to InvalidXLogRecptr when decoding
one made without a replication origin. Fix that, and the wrong type of
the new commit_time variable.
This didn't trigger a regression test failure because we explicitly
don't show commit timestamps in the regression tests, as they obviously
are variable. Add a test that checks that a decoded commit's timestamp
is within minutes of NOW() from before the commit.
Reported-By: Weiping Qu
Diagnosed-By: Artur Zakirov
Discussion: 56D4197E.9050706@informatik.uni-kl.de,
56D42918.1010108@postgrespro.ru
Backpatch: 9.5, where 5aa235042 originates.
The existing hint talked about "may only contain letters", but the
actual requirement is more strict: only lower case letters are allowed.
Reported-By: Rushabh Lathia
Author: Rushabh Lathia
Discussion: AGPqQf2x50qcwbYOBKzb4x75sO_V3g81ZsA8+Ji9iN5t_khFhQ@mail.gmail.com
Backpatch: 9.4-, where replication slots were added
Alvaro Herrera
Michael Paquier
Tom Lane
Simon Riggs
Peter Eisentraut
Robert Haas
Bruce Momjian
Andres Freund