edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
When writing / debugging an isolation test it sometimes is useful to see which
session holds what lock etc. To make it easier, both as part of spec files and
interactively, append the session name to application_name. Since b1907d688
application_name already contains the test name, this appends the session's
name to that.
insert-conflict-specconflict did something like this manually, which can now
be removed.
As we have done lately with other test infrastructure improvements, backpatch
this change, to make it easier to backpatch tests.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20211211012052.2blmzcmxnxqawd2z@alap3.anarazel.de
Backpatch: 10-, to make backpatching of tests easier.
We started to backpatch test infrastructure improvements more aggressively to
make it easier to backpatch test. A proposed isolationtester improvement has a
dependency on b1907d688, backpatch b1907d688 to make it easier to subsequently
backpatch the new proposed isolationtester change.
Discussion: https://postgr.es/m/861977.1639421872@sss.pgh.pa.us
Backpatch: 10-12, the commit already is in 13-HEAD
Recent versions of gcc whine about the admittedly-completely-illegible
formatting of this macro. We've not noticed for a few reasons:
* In v12 and up, the problem is gone thanks to 48e24ba6b.
(Back-patching that doesn't seem prudent, though, so this patch
just manually improves the macro's formatting.)
* Buildfarm animals that might have complained, such as caiman,
do not because they use --with-openssl and so don't build imath.c.
* In a manual run such as "make all check-world", you won't see the
warning because it gets buried in an install.log file. You have to
do "make -C contrib all" or the like to see it.
I noticed this because in older branches, the last bit doesn't
happen so "check-world" actually does spew the warnings to stderr.
Maybe we should rethink how that works, because the newer behavior
is not an improvement IMO.
Back-patch down to 9.2, pursuant to newly-established project policy
about keeping out-of-support branches buildable.
Discussion: https://postgr.es/m/d0316012-ece7-7b7e-2d36-9c38cb77cb3b@enterprisedb.com
List types numeric and timestamptz, which don't seem to have ever been
included here. Restore bigint, which was no-doubt-accidentally deleted
in v12. Fix some errors, or at least obsolete usages (nobody declares
float arguments as "float8*" anymore, even though they might be that
under the hood). Re-alphabetize. Remove the seeming claim that this
is a complete list of built-in types.
Per question from Oskar Stenberg.
Discussion: https://postgr.es/m/HE1PR03MB2971DE2527ECE1E99D6C19A8F96E9@HE1PR03MB2971.eurprd03.prod.outlook.com
Certain settings from configuration or the Makefile infrastructure are
used by the TAP tests, but were not being set up by vcregress.pl. This
remedies those omissions. This should increase test coverage, especially
on the buildfarm.
Reviewed by Noah Misch
Discussion: https://postgr.es/m/17093da5-e40d-8335-d53a-2bd803fc38b0@dunslane.net
Backpatch to all live branches.
Further experimentation shows that commit 6051857fc is not sufficient
when using (some versions of?) OpenSSL. The reason is obscure, but
calling shutdown(socket, SD_SEND) improves matters.
Per testing by Andrew Dunstan and Alexander Lakhin.
Back-patch as before.
Discussion: https://postgr.es/m/af5e0bf3-6a61-bb97-6cba-061ddf22ff6b@dunslane.net
ssl_crl_file and ssl_crl_dir are both used to for client certificate
revocation, not server certificates. The description for the params
could be easily misread to mean the opposite however, as evidenced
by the bugreport leading to this fix. Similarly, expand sslcrl and
and sslcrldir to explicitly mention server certificates. While there
also mention sslcrldir where previously only sslcrl was discussed.
Backpatch down to v10, with the CRL dir fixes down to 14 where they
were introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211202.135441.590555657708629486.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/CABWY_HCBUCjY1EJHrEGePGEaSZ5b29apgTohCyygtsqe_ySYng@mail.gmail.com
Backpatch-through: 10
pgfdw_report_error() in postgres_fdw gets a message from PGresult or
PGconn to report an error received from a remote server. Previously
if it could get a message from neither of them, it reported empty
message unexpectedly. The cause of this issue was that pgfdw_report_error()
didn't handle properly the case where no message could be obtained
and its local variable message_primary was set to '\0'.
This commit improves pgfdw_report_error() so that it reports the message
"could not obtain ..." when it gets no message and message_primary
is set to '\0'. This is the same behavior as when message_primary is NULL.
dblink_res_error() in dblink has the same issue, so this commit also
improves it in the same way.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/477c16c8-7ea4-20fc-38d5-ed3a77ed616c@oss.nttdata.com
It turns out that this is necessary to keep Winsock from dropping any
not-yet-sent data, such as an error message explaining the reason for
process termination. It's pretty weird that the implicit close done
by the kernel acts differently from an explicit close, but it's hard
to argue with experimental results.
Independently submitted by Alexander Lakhin and Lars Kanis (comments
by me, though). Back-patch to all supported branches.
Discussion: https://postgr.es/m/90b34057-4176-7bb0-0dbb-9822a5f6425b@greiz-reinsdorf.de
Discussion: https://postgr.es/m/16678-253e48d34dc0c376@postgresql.org
The existing pg_upgrade/test.sh and the buildfarm code have been holding
the same set of SQL queries when doing cross-version upgrade tests to
adapt the objects created by the regression tests before the upgrade
(mostly, incompatible or non-existing objects need to be dropped from
the origin, perhaps re-created).
This moves all those SQL queries into a new, separate, file with a set
of \if clauses to handle the version checks depending on the old version
of the cluster to-be-upgraded.
The long-term plan is to make the buildfarm code re-use this new SQL
file, so as committers are able to fix any compatibility issues in the
tests of pg_upgrade with a refresh of the core code, without having to
poke at the buildfarm client. Note that this is only able to handle the
main regression test suite, and that nothing is done yet for contrib
modules yet (these have more issues like their database names).
A backpatch down to 10 is done, adapting the version checks as this
script needs to be only backward-compatible, so as it becomes possible
to clean up a maximum amount of code within the buildfarm client.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 10
The various ALTER OWNER routines tend to leak memory in
CurrentMemoryContext. That's not a problem when they're only called
once per command; but in this usage where we might be touching many
objects, it can amount to a serious memory leak. Fix that by running
each call in a short-lived context.
(DROP OWNED BY likely has a similar issue, except that you'll probably
run out of lock table space before noticing. REASSIGN is worth fixing
since for most non-table object types, it won't take any lock.)
Back-patch to all supported branches. Unfortunately, in the back
branches this helps to only a limited extent, since the sinval message
queue bloats quite a lot in this usage before commit 3aafc030a,
consuming memory more or less comparable to what's actually leaked.
Still, it's clearly a leak with a simple fix, so we might as well fix it.
Justin Pryzby, per report from Guillaume Lelarge
Discussion: https://postgr.es/m/CAECtzeW2DAoioEGBRjR=CzHP6TdL=yosGku8qZxfX9hhtrBB0Q@mail.gmail.com
Remove the confusing use of ORDER BY in an example materialized
view. It adds nothing to the example, but might encourage
people to follow bad practice. Clarify REFRESH MATERIALIZED
VIEW's note about whether view ordering is retained (it isn't).
Maciek Sakrejda
Discussion: https://postgr.es/m/CAOtHd0D-OvrUU0C=4hX28p4BaSE1XL78BAQ0VcDaLLt8tdUzsg@mail.gmail.com
In commit ff9f111bce I mixed up inconsistent definitions of the LSN of
the first record in a page, when the previous record ends exactly at the
page boundary. The correct LSN is adjusted to skip the WAL page header;
I failed to use that when setting XLogReaderState->overwrittenRecPtr,
so at WAL replay time VerifyOverwriteContrecord would refuse to let
replay continue past that record.
Backpatch to 10. 9.6 also contains this bug, but it's no longer being
maintained.
Discussion: https://postgr.es/m/45597.1637694259@sss.pgh.pa.us
Inluding <compile.h> and <eval.h> has not been necessary since Python
2.4, since they are included via <Python.h>. Morever, <eval.h> is
being removed in Python 3.11. So remove these includes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/84884.1637723223%40sss.pgh.pa.us
Replica identities that depend directly on an index rely on a set of
properties, one of them being that all the columns defined in this index
have to be marked as NOT NULL. There was a hole in the logic with ALTER
TABLE DROP NOT NULL, where it was possible to remove the NOT NULL
property of a column part of an index used as replica identity, so block
it to avoid problems with logical decoding down the road.
The same check was already done columns part of a primary key, so the
fix is straight-forward.
Author: Haiying Tang, Hou Zhijie
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB6113338C102BEE8B2FFC5BD9FB619@OS0PR01MB6113.jpnprd01.prod.outlook.com
Backpatch-through: 10
Clarify that the results of nextval and setval are not guaranteed
persistent until the calling transaction commits. Some people
seem to have drawn the opposite conclusion from the statement that
these functions are never rolled back, so re-word to avoid saying
it quite that way.
Discussion: https://postgr.es/m/CAKU4AWohO=NfM-4KiZWvdc+z3c1C9FrUBR6xnReFJ6sfy0i=Lw@mail.gmail.com
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
When a stored expression depends on a user-defined cast, the backend
records the dependency as being on the cast's implementation function
--- or indeed, if there's no cast function involved but just
RelabelType or CoerceViaIO, no dependency is recorded at all. This
is problematic for pg_dump, which is at risk of dumping things in the
wrong order leading to restore failures. Given the lack of previous
reports, the risk isn't that high, but it can be demonstrated if the
cast is used in some view whose rowtype is then used as an input or
result type for some other function. (That results in the view
getting hoisted into the functions portion of the dump, ahead of
the cast.)
A logically bulletproof fix for this would require including the
cast's OID in the parsed form of the expression, whence it could be
extracted by dependency.c, and then the stored dependency would force
pg_dump to do the right thing. Such a change would be fairly invasive,
and certainly not back-patchable. Moreover, since we'd prefer that
an expression using cast syntax be equal() to one doing the same
thing by explicit function call, the cast OID field would have to
have special ignored-by-comparisons semantics, making things messy.
So, let's instead fix this by a very simple hack in pg_dump: change
the object-type priority order so that casts are initially sorted
before functions, immediately after types. This fixes the problem
in a fairly direct way for casts that have no implementation function.
For those that do, the implementation function will be hoisted to just
before the cast by the dependency sorting step, so that we still have
a valid dump order. (I'm not sure that this provides a full guarantee
of no problems; but since it's been like this for many years without
any previous reports, this is probably enough to fix it in practice.)
Per report from Дмитрий Иванов.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPL5KHoGa3uvyKp6z6m48LwCnTsK+LRQ_mcA4uKGfqAVSEjV_A@mail.gmail.com
Normally "prove" and "perl" come from the same Perl installation,
but we support the case where they don't (mainly because the MSys
buildfarm animals need this). In that case, AX_PROG_PERL_MODULES
is completely the wrong thing to use, because it's checking what
"perl" has. Instead, make a little TAP test script including the
required modules, and run that under "prove".
We don't need ax_prog_perl_modules.m4 at all after this change,
so remove it.
Back-patch to all supported branches, for the buildfarm's benefit.
(In v10, this also back-patches the effects of commit 264eb03aa.)
Andrew Dunstan and Tom Lane, per an observation by Noah Misch
Discussion: https://postgr.es/m/E1moZHS-0002Cu-Ei@gemulon.postgresql.org
Previously it was impossible to terminate these programs via control-C
while they were prompting for a password. We can fix that trivially
for their initial password prompts, by moving setup of the SIGINT
handler from just before to just after their initial GetConnection()
calls.
This fix doesn't permit escaping out of later re-prompts, but those
should be exceedingly rare, since the user's password or the server's
authentication setup would have to have changed meanwhile. We
considered applying a fix similar to commit 46d665bc2, but that
seemed more complicated than it'd be worth. Moreover, this way is
back-patchable, which that wasn't.
The misbehavior exists in all supported versions, so back-patch to all.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
We use "clang" to compile bitcode files for LLVM inlining. That might
be different from the build's main C compiler, so it needs its own set
of compiler flags. To simplify configure, we don't bother adding any
-W switches to that flag set; there's little need since the main build
will show us any warnings. However, if we don't want to see unwanted
warnings, we still have to add any -Wno-warning switches we'd normally
use with clang.
This escaped notice before commit 9ff47ea41, which tried to add
-Wno-compound-token-split-by-macro; buildfarm animals using mismatched
CC and CLANG still showed those warnings. I'm not sure why we never
saw any effects from the lack of -Wno-unused-command-line-argument
(maybe that's only activated by -Wall?). clang does not currently
support -Wno-format-truncation or -Wno-stringop-truncation, although
in the interests of future-proofing and consistency I included tests
for those.
Back-patch to v11 where we started building bitcode files.
Discussion: https://postgr.es/m/2921539.1637254619@sss.pgh.pa.us
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
The "See also" section on the reference page for CREATE PUBLICATION
didn't match the cross references on CREATE SUBSCRIPTION and their
ALTER counterparts. Fixed by adding an xref to the CREATE and ALTER
SUBSCRIPTION pages. Backpatch down to v10 where CREATE PUBLICATION
was introduced.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAHut+PvGWd3-Ktn96c-z6uq-8TGVVP=TPOkEovkEfntoo2mRhw@mail.gmail.com
Backpatch-through: 10
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
clang-12 has introduced -Wcompound-token-split-by-macro, that is causing
a large amount of warnings when building PL/Perl because of its
interactions with upstream Perl. This commit adds one -Wno to CFLAGS at
./configure time if the flag is supported by the compiler to silence all
those warnings.
Upstream perl has fixed this issue, but it is going to take some time
before this is spread across the buildfarm, and we have noticed that
some animals would be useful with an extra -Werror to help with the
detection of incorrect placeholders (see b0cf544), dangomushi being
one.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/YYr3qYa/R3Gw+Sbg@paquier.xyz
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
When a role being dropped contains is referenced by catalog objects that
are concurrently also being dropped, a crash can result while trying to
construct the string that describes the objects. Suppress that by
ignoring objects whose descriptions are returned as NULL.
The majority of relevant codesites were already cautious about this
already; we had just missed a couple.
This is an old bug, so backpatch all the way back.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17126-21887f04508cb5c8@postgresql.org
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
Failing to do so results in inability of logical decoding to process the
WAL stream. Handle it by doing nothing.
Backpatch all the way back.
Reported-by: Petr Jelínek <petr.jelinek@enterprisedb.com>
Windows fails on a request to read() more than INT_MAX bytes,
and perhaps other platforms could have similar issues. Let's
adjust this code to read at most 1GB per call.
(One would not have thought the file could get that big, but now
we have a field report of trouble, so it can. We likely ought to
add some mechanism to limit the size of the query-texts file
separately from the size of the hash table. That is not this
patch, though.)
Per bug #17254 from Yusuke Egashira. It's been like this for
awhile, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17254-a926c89dc03375c2@postgresql.org
DST law changes in Fiji, Jordan, Palestine, and Samoa. Historical
corrections for Barbados, Cook Islands, Guyana, Niue, Portugal, and
Tonga.
Also, the Pacific/Enderbury zone has been renamed to Pacific/Kanton.
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Africa/Accra, America/Atikokan,
America/Blanc-Sablon, America/Creston, America/Curacao,
America/Nassau, America/Port_of_Spain, Antarctica/DumontDUrville,
and Antarctica/Syowa.