locking conflict against concurrent CHECKPOINT that was discussed a few
weeks ago. Also, if not using WAL archiving (which is always true ATM
but won't be if PITR makes it into this release), there's no need to
WAL-log the index build process; it's sufficient to force-fsync the
completed index before commit. This seems to gain about a factor of 2
in my tests, which is consistent with writing half as much data. I did
not try it with WAL on a separate drive though --- probably the gain would
be a lot less in that scenario.
temp tables, and avoid WAL-logging truncations of temp tables. Do issue
fsync on truncated files (not sure this is necessary but it seems like
a good idea).
rather than an error code, and does elog(ERROR) not elog(WARNING)
when it detects a problem. All callers were simply elog(ERROR)'ing on
failure return anyway, and I find it hard to envision a caller that would
not, so we may as well simplify the callers and produce the more useful
error message directly.
explicitly fsync'ing every (non-temp) file we have written since the
last checkpoint. In the vast majority of cases, the burden of the
fsyncs should fall on the bgwriter process not on backends. (To this
end, we assume that an fsync issued by the bgwriter will force out
blocks written to the same file by other processes using other file
descriptors. Anyone have a problem with that?) This makes the world
safe for WIN32, which ain't even got sync(2), and really makes the world
safe for Unixen as well, because sync(2) never had the semantics we need:
it offers no way to wait for the requested I/O to finish.
Along the way, fix a bug I recently introduced in xlog recovery:
file truncation replay failed to clear bufmgr buffers for the dropped
blocks, which could result in 'PANIC: heap_delete_redo: no block'
later on in xlog replay.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
(SIGUSR1, which we have not been using recently) instead of piggybacking
on SIGUSR2-driven NOTIFY processing. This has several good results:
the processing needed to drain the sinval queue is a lot less than the
processing needed to answer a NOTIFY; there's less contention since we
don't have a bunch of backends all trying to acquire exclusive lock on
pg_listener; backends that are sitting inside a transaction block can
still drain the queue, whereas NOTIFY processing can't run if there's
an open transaction block. (This last is a fairly serious issue that
I don't think we ever recognized before --- with clients like JDBC that
tend to sit with open transaction blocks, the sinval queue draining
mechanism never really worked as intended, probably resulting in a lot
of useless cache-reset overhead.) This is the last of several proposed
changes in response to Philip Warner's recent report of sinval-induced
performance problems.
costing us lots more to maintain than it was worth. On shared tables
it was of exactly zero benefit because we couldn't trust it to be
up to date. On temp tables it sometimes saved an lseek, but not often
enough to be worth getting excited about. And the real problem was that
we forced an lseek on every relcache flush in order to update the field.
So all in all it seems best to lose the complexity.
of whether we have successfully read data into a buffer; this makes the
error behavior a bit more transparent (IMHO anyway), and also makes it
work correctly for local buffers which don't use Start/TerminateBufferIO.
Collapse three separate functions for writing a shared buffer into one.
This overlaps a bit with cleanups that Neil proposed awhile back, but
seems not to have committed yet.
of VACUUM cases so that VACUUM requests don't affect the ARC state at all,
avoid corner case where BufferSync would uselessly rewrite a buffer that
no longer contains the page that was to be flushed. Make some minor
other cleanups in and around the bufmgr as well, such as moving PinBuffer
and UnpinBuffer into bufmgr.c where they really belong.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
* Changes incorrect CYGWIN defines to __CYGWIN__
* Some localtime returns NULL checks (when unchecked cause SEGVs under
Win32
regression tests)
* Rationalized CreateSharedMemoryAndSemaphores and
AttachSharedMemoryAndSemaphores (Bruce, I finally remembered to do it);
requires attention.
Claudio Natoli
and FreeDir routines modeled on the existing AllocateFile/FreeFile.
Like the latter, these routines will avoid failing on EMFILE/ENFILE
conditions whenever possible, and will prevent leakage of directory
descriptors if an elog() occurs while one is open.
Also, reduce PANIC to ERROR in MoveOfflineLogs() --- this is not
critical code and there is no reason to force a DB restart on failure.
All per recent trouble report from Olivier Hubaut.
number of openable files and the number already opened. This eliminates
depending on sysconf(_SC_OPEN_MAX), and allows much saner behavior on
platforms where open-file slots are used up by semaphores.
for already empty buffers because their buffer tag was not cleard out
when the buffers have been invalidated before.
Also removed the misnamed BM_FREE bufhdr flag and replaced the checks,
which effectively ask if the buffer is unpinned, with checks against the
refcount field.
Jan
wit: Add a header record to each WAL segment file so that it can be reliably
identified. Avoid splitting WAL records across segment files (this is not
strictly necessary, but makes it simpler to incorporate the header records).
Make WAL entries for file creation, deletion, and truncation (as foreseen but
never implemented by Vadim). Also, add support for making XLOG_SEG_SIZE
configurable at compile time, similarly to BLCKSZ. Fix a couple bugs I
introduced in WAL replay during recent smgr API changes. initdb is forced
due to changes in pg_control contents.
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
done by the background writer between writing dirty blocks and
napping.
none (default) no action
sync bgwriter calls smgrsync() causing a sync(2)
A global sync() is only good on dedicated database servers, so
more flush methods should be added in the future.
Jan
instruction in the s_lock() wait loop, and use test before test-and-set
in TAS() macro to avoid unnecessary bus traffic. Patch from Manfred
Spraul, reworked a bit by Tom.
that were broken, try to make layout of s_lock.h entries consistent,
use HAVE_SPINLOCKS in preference to HAS_TEST_AND_SET everywhere outside
s_lock.h itself.
some concurrent changes Jan was making to the bufmgr. Here's an
updated version of the patch -- it should apply cleanly to CVS
HEAD and passes the regression tests.
This patch makes the following changes:
- remove the UnlockAndReleaseBuffer() and UnlockAndWriteBuffer()
macros, and replace uses of them with calls to the appropriate
functions.
- remove a bunch of #ifdef BMTRACE code: it is ugly & broken
(i.e. it doesn't compile)
- make BufferReplace() return a bool, not an int
- cleanup some logic in bufmgr.c; should be functionality
equivalent to the previous code, just cleaner now
- remove the BM_PRIVATE flag as it is unused
- improve a few comments, etc.
on 64-bit Solaris. Use a non-system-dependent datatype for UsedShmemSegID,
namely unsigned long (which we were already assuming could hold a shmem
key anyway, cf RecordSharedMemoryInLockFile).
method control structure, or a table of control structures.
. Use type LOCKMASK where an int is not a counter.
. Get rid of INVALID_TABLEID, use INVALID_LOCKMETHOD instead.
. Use INVALID_LOCKMETHOD instead of (LOCKMETHOD) NULL, because
LOCKMETHOD is not a pointer.
. Define and use macro LockMethodIsValid.
. Rename LOCKMETHOD to LOCKMETHODID.
. Remove global variable LongTermTableId in lmgr.c, because it is
never used.
. Make LockTableId static in lmgr.c, because it is used nowhere else.
Why not remove it and use DEFAULT_LOCKMETHOD?
. Rename the lock method control structure from LOCKMETHODTABLE to
LockMethodData. Introduce a pointer type named LockMethod.
. Remove elog(FATAL) after InitLockTable() call in
CreateSharedMemoryAndSemaphores(), because if something goes wrong,
there is elog(FATAL) in LockMethodTableInit(), and if this doesn't
help, an elog(ERROR) in InitLockTable() is promoted to FATAL.
. Make InitLockTable() void, because its only caller does not use its
return value any more.
. Rename variables in lock.c to avoid statements like
LockMethodTable[NumLockMethods] = lockMethodTable;
lockMethodTable = LockMethodTable[lockmethod];
. Change LOCKMETHODID type to uint16 to fit into struct LOCKTAG.
. Remove static variables BITS_OFF and BITS_ON from lock.c, because
I agree to this doubt:
* XXX is a fetch from a static array really faster than a shift?
. Define and use macros LOCKBIT_ON/OFF.
Manfred Koizar
This first part of the background writer does no syncing at all.
It's only purpose is to keep the LRU heads clean so that regular
backends seldom to never have to call write().
Jan
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
pghackers. This fixes the problem recently reported by Markus KrÌutner
(hash bucket split corrupts the state of scans being done concurrently),
and I believe it also fixes all the known problems with deadlocks in
hash index operations. Hash indexes are still not really ready for prime
time (since they aren't WAL-logged), but this is a step forward.
index pages: when _bt_getbuf asks the FSM for a free index page, it is
possible (and, in some cases, even moderately likely) that the answer
will be the same page that _bt_split is trying to split. _bt_getbuf
already knew that the returned page might not be free, but it wasn't
prepared for the possibility that even trying to lock the page could
be problematic. Fix by doing a conditional rather than unconditional
grab of the page lock.
that OS=hpux is the same as CPU=hppa. First steps at doing this.
With these patches, we still work on hppa with either gcc or HP's cc.
We might work on hpux/itanium with gcc, but I can't test it. Definitely
will not work on hpux/itanium with non-gcc compiler, for lack of spinlock
code.
least-recently-used strategy from clog.c into slru.c. It doesn't
change any visible behaviour and passes all regression tests plus a
TruncateCLOG test done manually.
Apart from refactoring I made a little change to SlruRecentlyUsed,
formerly ClogRecentlyUsed: It now skips incrementing lru_counts, if
slotno is already the LRU slot, thus saving a few CPU cycles. To make
this work, lru_counts are initialised to 1 in SimpleLruInit.
SimpleLru will be used by pg_subtrans (part of the nested transactions
project), so the main purpose of this patch is to avoid future code
duplication.
Manfred Koizar
page when it's read in, per pghackers discussion around 17-Feb. Add a
GUC variable zero_damaged_pages that causes the response to be a WARNING
followed by zeroing the page, rather than the normal ERROR; this is per
Hiroshi's suggestion that there needs to be a way to get at the data
in the rest of the table.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
at database shutdown, and then load it again at database startup. This
preserves our hard-won knowledge of free space across restarts (given
an orderly shutdown, that is).
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
RelOid_pg_class, and transaction locks XactLockTableId. RelId is renamed
to objId.
- LockObject() and UnlockObject() functions created, and their use
sprinkled throughout the code to do descent locking for domains and
types. They accept lock modes AccessShare and AccessExclusive, as we
only really need a 'read' and 'write' lock at the moment. Most locking
cases are held until the end of the transaction.
This fixes the cases Tom mentioned earlier in regards to locking with
Domains. If the patch is good, I'll work on cleaning up issues with
other database objects that have this problem (most of them).
Rod Taylor
>
> ... he is now about to write an inlined version that can go into
> s_lock.h . I'll send the new patch later on...
OK, here it comes:
An inlined version of tas(), that works for both, powerpc and
powerpc64. The patch is against 7.3b5 and passes the test suite on
both architectures.
Reinhard Max
between signal handler and enable/disable code, avoid accumulation of
timing error due to trying to maintain remaining-time instead of
absolute-end-time, disable timeout before commit not after.
during the regression test. The problem has been reproduced on two machine
but both of these are the same type of hardware and software. I also tried
to recreate the problem on other machines, on older version of AIX but I
couldn't.
After looked through pgsql-hackers mailing list, I focused on spin lock
issue to solve the problem. The easiest and may not be the best solution
for the problem is to give up HAS_TEST_AND_SET. This actually works.
One another and better solution for the problem is to use _check_lock() and
_clear_lock() as spin lock. Important thing here is to define S_UNLOCK()
with _clear_lock(). This will solve the so called "Compiler bug" issue
someone wrote on the mailing list.
We have some other API such as cs(), compare_and_swap() and fetch_and_or()
to do test and set on AIX, but any of these didn't solve my problem. I
wrote tiny testing program to see if we have any bug of these API of AIX,
but I couldn't see any problem except for compare_and_swap(). It seems that
you can not use compare_and_swap() for the purpose, as it would not work as
spin lock on any SMP machines I tested. I don't know the reason why cs()
nor fetch_and_or()/fetch_and_and() will not work with PostgreSQL on p690.
These worked with my testing program on all machines I tested.
Tomoyuki Niijima
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
available (else there's no way to interpret the list links). Change
pg_locks view to show transaction ID locks separately from ordinary
relation locks. Avoid showing N duplicate rows when the same lock is
held multiple times (seems unlikely that users care about exact hold
count). Improve documentation.
connections by the superuser only.
This patch replaces the last patch I sent a couple of days ago.
It closes a connection that has not been authorised by a superuser if it would
leave less than the GUC variable ReservedBackends
(superuser_reserved_connections in postgres.conf) backend process slots free
in the SISeg. This differs to the first patch which only reserved the last
ReservedBackends slots in the procState array. This has made the free slot
test more expensive due to the use of a lock.
After thinking about a comment on the first patch I've also made it a fatal
error if the number of reserved slots is not less than the maximum number of
connections.
Nigel J. Andrews
This patch is an updated version of the lock listing patch. I've made
the following changes:
- write documentation
- wrap the SRF in a view called 'pg_locks': all user-level
access should be done through this view
- re-diff against latest CVS
One thing I chose not to do is adapt the SRF to use the anonymous
composite type code from Joe Conway. I'll probably do that eventually,
but I'm not really convinced it's a significantly cleaner way to
bootstrap SRF builtins than the method this patch uses (of course, it
has other uses...)
Neil Conway
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
>usefulness.
>
>> [...] should I post a patch that puts pagesize directly into
>> PageHeaderData?
>
>If you're so inclined. Given that pd_opaque is hidden in those macros,
>there wouldn't be much of any gain in readability either, so I haven't
>worried about changing the declaration.
Thanks for the clarification. Here is the patch. Not much gain, but at
least it saves the next junior hacker from scratching his head ...
Manfred Koizar
all places, where pd_linp is accessed. Also introduce new macros
SizeOfPageHeaderData and BTMaxItemSize. This is just source code
cosmetic, no behaviour changed.
Manfred Koizar
lines of code into internal routines (drop_relfilenode_buffers,
release_buffer) and by hiding unused routines (PrintBufferDescs,
PrintPinnedBufs) behind #ifdef NOT_USED. Remove AbortBufferIO()
declaration from bufmgr.c (already declared in bufmgr.h)
Manfred Koizar
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
was in the thread "make BufferGetBlockNumber() a macro". Tom
objected to the original patch, so I prepared a new one which
doesn't change BufferGetBlockNumber() into a macro, it just
cleans up some comments and fixes an assertion. The patch
is attached.
Neil Conway
speed up repetitive failed searches; per pghackers discussion in late
January. inval.c logic substantially simplified, since we can now treat
inserts and deletes alike as far as inval events are concerned. Some
repair work needed in heap_create_with_catalog, which turns out to have
been doing CommandCounterIncrement at a point where the new relation has
non-self-consistent catalog entries. With the new inval code, that
resulted in assert failures during a relcache entry rebuild.
Improve 'pg_internal.init' relcache entry preload mechanism so that it is
safe to use for all system catalogs, and arrange to preload a realistic
set of system-catalog entries instead of only the three nailed-in-cache
indexes that were formerly loaded this way. Fix mechanism for deleting
out-of-date pg_internal.init files: this must be synchronized with transaction
commit, not just done at random times within transactions. Drive it off
relcache invalidation mechanism so that no special-case tests are needed.
Cache additional information in relcache entries for indexes (their pg_index
tuples and index-operator OIDs) to eliminate repeated lookups. Also cache
index opclass info at the per-opclass level to avoid repeated lookups during
relcache load.
Generalize 'systable scan' utilities originally developed by Hiroshi,
move them into genam.c, use in a number of places where there was formerly
ugly code for choosing either heap or index scan. In particular this allows
simplification of the logic that prevents infinite recursion between syscache
and relcache during startup: we can easily switch to heapscans in relcache.c
when and where needed to avoid recursion, so IndexScanOK becomes simpler and
does not need any expensive initialization.
Eliminate useless opening of a heapscan data structure while doing an indexscan
(this saves an mdnblocks call and thus at least one kernel call).
to prevent spreading of corruption when page header pointers are bad.
Merge PageZero into PageInit, since it was never used separately, and
remove separate memset calls used at most other PageInit call points.
Remove IndexPageCleanup, which wasn't used at all.
should be accounted for in the PROC_SEM_MAP_ENTRIES() macro. Otherwise
the ports that rely on this macro to size data structures are broken.
Mea culpa.
so that only one signal number is used not three. Flags in shared
memory tell the reason(s) for the current signal. This method is
extensible to handle more signal reasons without chewing up even more
signal numbers, but the immediate reason is to keep pg_pwd reloads
separate from SIGHUP processing in the postmaster.
Also clean up some problems in the postmaster with delayed response to
checkpoint status changes --- basically, it wouldn't schedule a checkpoint
if it wasn't getting connection requests on a regular basis.
readability. Bizarre '(long *) TRUE' return convention is gone,
in favor of just raising an error internally in dynahash.c when
we detect hashtable corruption. HashTableWalk is gone, in favor
of using hash_seq_search directly, since it had no hope of working
with non-LONGALIGNable datatypes. Simplify some other code that was
made undesirably grotty by promixity to HashTableWalk.
portability issues). Caller-visible data structures are now allocated
on MAXALIGN boundaries, allowing safe use of datatypes wider than 'long'.
Rejigger hash_create API so that caller specifies size of key and
total size of entry, not size of key and size of rest of entry.
This simplifies life considerably since each number is just a sizeof(),
and padding issues etc. are taken care of automatically.
upper limit on what we will believe from sysconf(_SC_OPEN_MAX). The
default value is 1000, so that under ordinary conditions it won't
affect the behavior. But on platforms where the kernel promises far
more than it can deliver, this can be used to prevent running out of
file descriptors. See numerous past discussions, eg, pgsql-hackers
around 23-Dec-2000.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
a hung client or lost connection can't indefinitely block a postmaster
child (not to mention the possibility of deliberate DoS attacks).
Timeout is controlled by new authentication_timeout GUC variable,
which I set to 60 seconds by default ... does that seem reasonable?
for them, and making them just wastes time during backend startup/shutdown.
Also, remove compile-time MAXBACKENDS limit per long-ago proposal.
You can now set MaxBackends as high as your kernel can stand without
any reconfiguration/recompilation.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
useful as yet, since its primary source of information is (full) VACUUM,
which makes a concerted effort to get rid of free space before telling
the map about it ... next stop is concurrent VACUUM ...
stub) into the rest of the system. Adopt a cleaner approach to preventing
deadlock in concurrent heap_updates: allow RelationGetBufferForTuple to
select any page of the rel, and put the onus on it to lock both buffers
in a consistent order. Remove no-longer-needed isExtend hack from
API of ReleaseAndReadBuffer.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
SI messages now include the relevant database OID, so that operations
in one database do not cause useless cache flushes in backends attached
to other databases. Declare SI messages properly using a union, to
eliminate the former assumption that Oid is the same size as int or Index.
Rewrite the nearly-unreadable code in inval.c, and document it better.
Arrange for catcache flushes at end of command/transaction to happen before
relcache flushes do --- this avoids loading a new tuple into the catcache
while setting up new relcache entry, only to have it be flushed again
immediately.
Cygwin with the possible exception of mSQL-interface. Since I don't
have mSQL installed, I skipped this tool.
Except for dealing with a missing getopt.h (oid2name) and HUGE (seg),
the bulk of the patch uses the standard PostgreSQL approach to deal with
Windows DLL issues.
I tested the build aspect of this patch under Cygwin and Linux without
any ill affects. Note that I did not actually attempt to test the code
for functionality.
The procedure to apply the patch is as follows:
$ # save the attachment as /tmp/contrib.patch
$ # change directory to the top of the PostgreSQL source tree
$ patch -p0 </tmp/contrib.patch
Jason
detected sooner in backend startup, and is treated as an expected error
(it gives 'Sorry, too many clients already' now). This allows us not
to have to enforce the MaxBackends limit exactly in the postmaster.
Also, remove ProcRemove() and fold its functionality into ProcKill().
There's no good reason for a backend not to be responsible for removing
its PROC entry, and there are lots of good reasons for the postmaster
not to be touching shared-memory data structures.
directory (which can be made a symlink to put temp files on another disk).
Add code to delete leftover temp files during postmaster startup.
Bruce, with some kibitzing from Tom.
appropriate pin-count manipulation, and instead use ReleaseAndReadBuffer.
Make use of the fact that the passed-in buffer (if there is one) must
be pinned to avoid grabbing the bufmgr spinlock when we are able to
return this same buffer. Eliminate unnecessary 'previous tuple' and
'next tuple' fields of HeapScanDesc and IndexScanDesc, thereby removing
a whole lot of bookkeeping from heap_getnext() and related routines.
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
it does not support 64bit integers. AFAIK that's the default data type for
OIDs, so I am not surprised that this does not work. Use gcc instead.
BTW., 7.1 does not compile as is with gcc either, I believed the
required patches made it into the 7.1.1 release but obviously I missed
the deadline.
Since the ports mailing list does not seem to be archived I have attached
a copy of the patch (for 7.1 and 7.1.1).
I've just performed a build of a Watcom compiled version and found a couple
of bugs in the watcom specific part of that patch. Please use the attached
version instead.
Tegge, Bernd
when we need to move to a new page; as long as we can insert the new
tuple on the same page as before, we only need LockBuffer and not the
expensive stuff. Also, twiddle bufmgr interfaces to avoid redundant
lseeks in RelationGetBufferForTuple and BufferAlloc. Successive inserts
now require one lseek per page added, rather than one per tuple with
several additional ones at each page boundary as happened before.
Lock contention when multiple backends are inserting in same table
is also greatly reduced.
not being consulted anywhere, so remove it and remove the _mdnblocks()
calls that were used to set it. Change smgrextend interface to pass in
the target block number (ie, current file length) --- the caller always
knows this already, having already done smgrnblocks(), so it's silly to
do it over again inside mdextend. Net result: extension of a file now
takes one lseek(SEEK_END) and a write(), not three lseeks and a write.
as six bytes not eight. This fixes a regression test failure but more
importantly avoids wasting four bytes of pad space in every tuple header.
Also add some commentary about what's going on.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
> Is there one LOCKMETHODCTL for every backend? I thought there was only
> one of them.
>>
>> You're right, that line is erroneous; it should read
>>
>> size += MAX_LOCK_METHODS * MAXALIGN(sizeof(LOCKMETHODCTL));
>>
>> Not a significant error but it should be changed for clarity ...
waste of cycles on single-CPU machines, and of dubious utility on multi-CPU
machines too.
Tweak s_lock_stuck so that caller can specify timeout interval, and
increase interval before declaring stuck spinlock for buffer locks and XLOG
locks.
On systems that have fdatasync(), use that rather than fsync() to sync WAL
log writes. Ensure that WAL file is entirely allocated during XLogFileInit.
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
rewrite of deadlock checking. Lock holder objects are now reachable from
the associated LOCK as well as from the owning PROC. This makes it
practical to find all the processes holding a lock, as well as all those
waiting on the lock. Also, clean up some of the grottier aspects of the
SHMQueue API, and cause the waitProcs list to be stored in the intuitive
direction instead of the nonintuitive one. (Bet you didn't know that
the code followed the 'prev' link to get to the next waiting process,
instead of the 'next' link. It doesn't do that anymore.)
whitespace is unimportant in assembly code. Also, move VAX definition
of typedef slock_t to port header files to be like all the other ports.
Note that netbsd.h and openbsd.h are now identical, and I rather think
that freebsd.h is broken in the places where it doesn't agree --- but
I'll leave it to the freebsders to look at that.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
for Alpha gcc case. For Alpha non-gcc case, replace use of
__INTERLOCKED_TESTBITSS_QUAD builtin with __LOCK_LONG_RETRY and
__UNLOCK_LONG. The former does not execute an MB instruction and
therefore was guaranteed not to work on multiprocessor machines.
The LOCK_LONG builtins produce code that is the same in all essential
details as the gcc assembler code.
assume that TAS() will always succeed the first time, even if the lock
is known to be free. Also, make sure that code will eventually time out
and report a stuck spinlock, rather than looping forever. Small cleanups
in s_lock.h, too.
level" locks. A session lock is not released at transaction commit (but it
is released on transaction abort, to ensure recovery after an elog(ERROR)).
In VACUUM, use a session lock to protect the master table while vacuuming a
TOAST table, so that the TOAST table can be done in an independent
transaction.
I also took this opportunity to do some cleanup and renaming in the lock
code. The previously noted bug in ProcLockWakeup, that it couldn't wake up
any waiters beyond the first non-wakeable waiter, is now fixed. Also found
a previously unknown bug of the same kind (failure to scan all members of
a lock queue in some cases) in DeadLockCheck. This might have led to failure
to detect a deadlock condition, resulting in indefinite waits, but it's
difficult to characterize the conditions required to trigger a failure.
to ensure that we have released buffer refcounts and so forth, rather than
putting ad-hoc operations before (some of the calls to) proc_exit. Add
commentary to discourage future hackers from repeating that mistake.
included by everything that includes bufmgr.h --- it's supposed to be
internals, after all, not part of the API! This fixes the conflict
against FreeBSD headers reported by Rosenman, by making it unnecessary
for s_lock.h to be included by plperl.c.
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
that search loops only have to scan that far and not through all maxBackends
entries. This eliminates a performance penalty for setting maxBackends
much higher than the average number of active backends. Also, eliminate
no-longer-used 'backend tag' concept. Remove setting of environment
variables at backend start (except for CYR_RECODE), since none of them
are being examined by the backend any longer.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
as full as possible, seems better to use a tuple size around BLCKSZ/4
so that less space is wasted when a LO tuple is updated. Also, this
lets us use a logical page size that's an exact power of two, avoiding
partial-page writes when client is sending us stuff in power-of-2
buffer chunks.
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
from bufmgr - it would be nice to have separate hash in smgr
for node <--> fd mappings, but for the moment it's easy to
add new hash to relcache.
Fixed small bug in xlog.c:ReadRecord.
* Makefile: Add more standard targets. Improve shell redirection in GNU
make detection.
* src/backend/access/transam/rmgr.c: Fix incorrect(?) C.
* src/backend/libpq/pqcomm.c (StreamConnection): Work around accept() bug.
* src/include/port/unixware.h: ...with help from here.
* src/backend/nodes/print.c (plannode_type): Remove some "break"s after
"return"s.
* src/backend/tcop/dest.c (DestToFunction): ditto.
* src/backend/nodes/readfuncs.c: Add proper prototypes.
* src/backend/utils/adt/numutils.c (pg_atoi): Cope specially with strtol()
setting EINVAL. This saves us from creating an extra set of regression test
output for the affected systems.
* src/include/storage/s_lock.h (tas): Correct prototype.
* src/interfaces/libpq/fe-connect.c (parseServiceInfo): Don't use variable
as dimension in array definition.
* src/makefiles/Makefile.unixware: Add support for GCC.
* src/template/unixware: same here
* src/test/regress/expected/abstime-solaris-1947.out: Adjust whitespace.
* src/test/regress/expected/horology-solaris-1947.out: Part of this file
was evidently missing.
* src/test/regress/pg_regress.sh: Fix shell. mkdir -p returns non-zero if
the directory exists.
* src/test/regress/resultmap: Add entries for Unixware.
> Regression tests opr_sanity and sanity_check are now failing.
Um, Bruce, I've said several times that I didn't think Perchine's large
object changes should be applied until someone had actually reviewed
them.
I tested it restoring my database with > 100000 BLOBS, and dumping it out.
But unfortunatly I can not restore it back due to problems in pg_dump.
--
Sincerely Yours,
Denis Perchine
> > For a while I though it might be because we are using an alpha TAS in
> > the spinlock rather than the old semaphore. I replaced our spinlock
> > with the standard one and it made no difference. We have been running
> > with our spinlock implementation for nearly 2 months on a production
> > database now without a hitch, so I think it is ok. Did I ever submit
> > any patches for the Alpha spinlock?
>
> Not that I recall. We did get some advice from some Alpha gurus at DEC
> who seemed to think the existing TAS code is OK. What was it that you
> felt needed to be improved?
The current code uses semaphores, which has the advantage that it works
well even on multi-processor machines, but the disadvantage that it is not
the fastest way possible. Writing a spinlock on Alpha for SMP machines is
very difficult, as you need to deal with memory barriers. A real mess. But
then one of the people at Compaq pointed out to us that there is a
ready-made routine on Alpha. We implemented it with the two patches below.
I ran tests with lots of parallel back-ends and got around a 10% speed
increase. I include the two patches. Perhaps some of the other people
running Tru64 can have a look at these as well.
Cheers,
Adriaan Joubert
> this is patch v 0.4 to support transactions with BLOBs.
> All BLOBs are in one table. You need to make initdb.
>
> --
> Sincerely Yours,
> Denis Perchine
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
problems with some bits of it, but when all the patches are in it'll build
and we can fix it from there :) I've got a version that builds and runs and
that is the basis for these patches.
The first file has the new additional files that are required,
template/beos
backend/port/dynloader/beos.c
backend/port/dynloader/beos.h
include/port/beos.h
makefiles/Makefile.beos
The second is a tarball of diffs against a few files. I've added sys/ipc.h
to configure and config.h via configure.in and config.h.in and then started
adding the check as this file isn't needed on BeOS and having loads of
#ifdef BEOS isn't as obvious as #ifdef HAVE_SYS_IPC_H and isn't as
autconf'ish :)
Files touched are
include/c.h
configure.in
include/config.h.in
include/storage/ipc.h
include/utils/int8.h
Let me know how these go. I'll await a response before submitting any more.
Any problems just get in touch.
David Reid
as MaxHeapAttributeNumber. Increase MaxAttrSize to something more
reasonable (given what it's used for, namely checking char(n) declarations,
I didn't make it the full 1G that it could theoretically be --- 10Mb
seemed a more reasonable number). Improve calculation of MaxTupleSize.
duplicate keys by letting search go to the left rather than right when an
equal key is seen at an upper tree level. Fix poor choice of page split
point (leading to insertion failures) that was forced by chaining logic.
Don't store leftmost key in non-leaf pages, since it's not necessary.
Don't create root page until something is first stored in the index, so an
unused index is now 8K not 16K. (Doesn't seem to be as easy to get rid of
the metadata page, unfortunately.) Massive cleanup of unreadable code,
fix poor, obsolete, and just plain wrong documentation and comments.
See src/backend/access/nbtree/README for the gory details.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
PostgreSQL-7.0.2 run on Linux for the Intel-IA64 architecture. It also
fixes a bug in the configure scripts that caused configure to fail on
the fcntl(F_SETLK) test.
This fix triggered a bug in the fcntl(F_SETLK) code of the Linux
kernel when used on unix domain sockets resulting in postmaster to
segfault immediately after startup. There is a fix available and
included in the kernel that will be on SuSE Linux 7.0, but kernels <=
2.2.16 still have this bug.
Reinhard Max
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
it will close VFDs if necessary to surmount ENFILE or EMFILE failures.
Make use of this in md.c, xlog.c, and user.c routines that were
formerly vulnerable to these failures. In particular, this should
handle failures of mdblindwrt() that have been observed under heavy
load conditions. (By golly, every other process on the system may
crash after Postgres eats up all the kernel FDs, but Postgres will
keep going!)
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
Hiroshi. ReleaseRelationBuffers now removes rel's buffers from pool,
instead of merely marking them nondirty. The old code would leave valid
buffers for a deleted relation, which didn't cause any known problems
but can't possibly be a good idea. There were several places which called
ReleaseRelationBuffers *and* FlushRelationBuffers, which is now
unnecessary; but there were others that did not. FlushRelationBuffers
no longer emits a warning notice if it finds dirty buffers to flush,
because with the current bufmgr behavior that's not an unexpected
condition. Also, FlushRelationBuffers will flush out all dirty buffers
for the relation regardless of block number. This ensures that
pg_upgrade's expectations are met about tuple on-row status bits being
up-to-date on disk. Lastly, tweak BufTableDelete() to clear the
buffer's tag so that no one can mistake it for being a still-valid
buffer for the page it once held. Formerly, the buffer would not be
found by buffer hashtable searches after BufTableDelete(), but it would
still be thought to belong to its old relation by the routines that
sequentially scan the shared-buffer array. Again I know of no bugs
caused by that, but it still can't be a good idea.
whether to do fsync or not, and if so (which should be seldom) just
do the fsync immediately. This way we need not build data structures
in md.c/fd.c for blind writes.
as a shared dirtybit for each shared buffer. The shared dirtybit still
controls writing the buffer, but the local bit controls whether we need
to fsync the buffer's file. This arrangement fixes a bug that allowed
some required fsyncs to be missed, and should improve performance as well.
For more info see my post of same date on pghackers.
In the event of an elog() while the mode was set to immediate write,
there was no way for it to be set back to the normal delayed write.
The mechanism was a waste of space and cycles anyway, since the only user
was varsup.c, which could perfectly well call FlushBuffer directly.
Now it does just that, and the notion of a write mode is gone.
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
if presented an uninitialized (all zeroes) page. The system no longer
crashes hard if an all-zeroes page is present in a relation. There seem
to be some boundary conditions where a page will be appended to a relation
and zeroed, but its page header is never initialized; until we can track
down and fix all of those, robustness seems like a good idea.
Also, clean up some obsolete and downright wrong comments.
for the case of errors in backend startup, and proc_exit's method for
coping with errors during proc_exit was *completely* busted. Fixed per
discussions on pghackers around 11/6/99.
recycle storage within sort temp file on a block-by-block basis. This
reduces peak disk usage to essentially just the volume of data being
sorted, whereas it had been about 4x the data volume before.
BufFile so that it handles multi-segment temporary files transparently.
This allows sorts and hashes to work with data exceeding 2Gig (or whatever
the local limit on file size is). Change psort.c to use relative seeks
instead of absolute seeks for backwards scanning, so that it won't fail
when the data volume exceeds 2Gig.
* Buffer refcount cleanup (per my "progress report" to pghackers, 9/22).
* Add links to backend PROC structs to sinval's array of per-backend info,
and use these links for routines that need to check the state of all
backends (rather than the slow, complicated search of the ShmemIndex
hashtable that was used before). Add databaseOID to PROC structs.
* Use this to implement an interlock that prevents DESTROY DATABASE of
a database containing running backends. (It's a little tricky to prevent
a concurrently-starting backend from getting in there, since the new
backend is not able to lock anything at the time it tries to look up
its database in pg_database. My solution is to recheck that the DB is
OK at the end of InitPostgres. It may not be a 100% solution, but it's
a lot better than no interlock at all...)
* In ALTER TABLE RENAME, flush buffers for the relation before doing the
rename of the physical files, to ensure we don't get failures later from
mdblindwrt().
* Update TRUNCATE patch so that it actually compiles against current
sources :-(.
You should do "make clean all" after pulling these changes.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
offended my aesthestic sensibility that there was so much unreadable code
doing so little. Rewritten code is about half the size, faster, and
(I hope) much more intelligible.
the SInval spinlock while it is calling the passed invalFunction or
resetFunction. This is necessary to avoid deadlock with lmgr change;
InvalidateSharedInvalid can be called recursively now. It should be
a good performance improvement anyway --- holding a spinlock for more
than a very short interval is a no-no.
{
Oid relId;
Oid dbId;
union
{
BlockNumber blkno;
TransactionId xid;
} objId;
>
> Added:
> /*
> * offnum should be part of objId.tupleId above, but would increase
> * sizeof(LOCKTAG) and so moved here; currently used by userlocks only.
> */
> OffsetNumber offnum;
uint16 lockmethod; /* needed by userlocks */
} LOCKTAG;
gmake clean required...
User locks are ready for 6.5 release...
through MAXBACKENDS array entries used to be fine when MAXBACKENDS = 64.
It's not so cool with MAXBACKENDS = 1024 (or more!), especially not in a
frequently-used routine like SIDelExpiredDataEntries. Repair by making
procState array size be the soft MaxBackends limit rather than the hard
limit, and by converting SIGetProcStateLimit() to a macro.
files to be closed automatically at transaction abort or commit, should
they still be open. Also close any still-open stdio files allocated with
AllocateFile at abort/commit. This should eliminate problems with leakage
of file descriptors after an error. Also, put in some primitive buffered-IO
support so that psort.c can use virtual files without severe performance
penalties.
of MAXBACKENDS is now 1024, since all it's costing is about 32 bytes of memory
per array slot. configure's --with-maxbackends switch now controls DEF_MAXBACKENDS
which is simply the default value of the postmaster's -N switch. Thus,
the out-of-the-box configuration will still limit you to 64 backends,
but you can go up to 1024 backends simply by restarting the postmaster with
a different -N switch --- no rebuild required.
(--with-maxbackends). Add a postmaster switch (-N backends) that allows
the limit to be reduced at postmaster start time. (You can't increase it,
sorry to say, because there are still some fixed-size arrays.)
Grab the number of semaphores indicated by min(MAXBACKENDS, -N) at
postmaster startup, so that this particular form of bogus configuration
is exposed immediately rather than under heavy load.
spin-locks. Notice that it's now inline assembler in s_lock.h,
rather than seperate code in s_lock.c. It also shrank a little
bit... Just rip out the S_LOCK() define and insert the tas() inline
function. Please let me know if there are any problems with it.
Jon Buller
1. The UnixWare tas macro was reformatted (by indent or it like?) which caused
it to break. The asm macro construct is very particular about the %mem
construct -- it has to start in column 1.
2. When compiling libpq++, g++ was used even if configure found the C++ com-
piler to be CC.
3. When compiling libpq++, '-Wno-error' was added to CXXFLAGS, even if the
compiler wasn't g++.
Billy G. Allie
> sinval.patch
>
> fixes a problem in SI cache which causes table overflow if some
> backend is idle for a long time while other backends keep adding
> entries.
> It uses the new signal handling implemented in tprintf.patch.
> I have also increacasesed the max number of backends from 32 to 64
> and the table size from 1000 to 5000.
> I don't know if anybody is working on SI, but until another
> solution is found this patch fixes the problem. I have received
> messages from other people reporting the same problem which I
> fixed many months ago.
lock.patch
I have rewritten lock.c cleaning up the code and adding better
assert checking I have also added some fields to the lock and
xid tags for better support of user locks. There is also a new
function which returns an array of pids owning a lock.
I'm using this code from over six months and it works fine.
Summary of changes:
In pqcomm.h, use the SUN_LEN macro if it is defined to calculate
the size of the sockaddr_un structure.
In unixware.h, drop the use of the UNIXWARE macro. Everything can
be handled with the USE_UNIVEL_CC and DISABLE_COMPLEX_MACRO macros.
In s_lock.h, remove the reference to the UNIXWARE macro (see above).
In the unixware template, add the YFLAGS:-d line.
In various makefile templates, add (or cleanup) unixware and univel
port specific information.
-- Billy G. Allie
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
calls. Outside a transaction, the backend detects them as buffer
leaks; it sends a NOTICE, and frees them. This sometimes cause a
segmentation fault (at least on Linux). These indexes are initialized
on the first lo_read/lo_write/lo_tell call, and (normally) closed
on a lo_close call. Thus the buffer leaks appear when lo direct
access functions are used, and not with lo_import/lo_export functions
(libpq version calls lo_close before ending the command, and the
backend version uses another path).
The included patches (against recent snapshot, and against 6.3.2)
cause indexes to be closed on transaction end (that is on explicit
'END' statment, or on command termination outside trasaction blocks),
thus preventing the buffer leaks while increasing performance inside
transactions. Some (all?) 'classic' memory leaks are also removed.
I hope it will be ok.
--- Pascal ANDRE, graduated from Ecole Centrale Paris andre@via.ecp.fr
in a more readable form. -- I am submitting the following patches
to the June 6, 1998 snapshot of PostgreSQL. These patches implement
a port of PostgreSQL to SCO UnixWare 7, and updates the Univel port
(UnixWare 2.x). The patched files, and the reason
for the patch are:
File Reason for the patch ---------------
---------------------------------------------------------------
src/backend/port/dynloader/unixware.c src/backend/port/dynloader/unixware.h
src/include/port/unixware.h src/makefiles/Makefile.unixware
src/template/unixware
Created for the UNIXWARE port.
src/include/port/univel.h
Modifed this file to work with the changes made to
s_lock.[ch].
src/backend/storage/buffer/s_lock.c src/include/storage/s_lock.h
Moved the UNIXWARE (and Univel) tas() function from
s_lock.c to s_lock.h. The UnixWare compiler asm
construct is treated as a macro and needs to be in
the s_lock.h file. I also reworked the tas()
function to correct some errors in the code.
src/include/version.h.in
The use of the ## operator with quoted strings in
the VERSION macro caused problems with the UnixWare
C compiler. I removed the ## operators since they
were not needed in this case. The macro expands
into a sequence of quoted strings that will be
concatenated by any ANSI C compiler.
src/config.guess
This script was modified to recognize SCO UnixWare
7.
src/configure src/configure.in
The configure script was modified to recognize SCO
UnixWare 7.
Billy G. Allie
NS32K machine I contributed. In any case, I now have postgresql-6.3
running again on NetBSD/pc532, a NS32532 machine. The following
changes are needed relative to the src directory. (It looks like
support was partially removed when the files were moved from the
src/backend/storage/.... tree to the src/include tree.)
If you need me to get a current development version of postgresql
for this change let me know. Also, let me know if this code needs
updating due to another code movement that deleted the old NS32K
support.
Thank you.
Phil Nelson
GCC, the inner "#if defined(__GNUC__)" can just be omitted in that
architecture's block.
The existing arrangement with an outer "#if defined(__GNUC__)"
doesn't have any obvious benefit, and it encourages missed cases
like this one.
BTW, I'd suggest making the definition of clear_lock for HPUX be
static const slock_t clear_lock = {{-1, -1, -1, -1}};
The extra braces are needed to suppress warnings from gcc, and
declaring it const just seems like good practice.
regards, tom lane
but as I don't have access to a sparc for testing I just did what
I could. I am guessing here, but please apply the following to your
pgsql and let me know what happens. Also, cd to src/storage/buffer
and do 'make s_lock_test' as well.
David Gould
This incorporates all the precedeing patches and emailed suggestions
and the results of the performance testing I posted last week. I
would like to get this tested on as many platforms as possible so
I can verify it went in correctly (as opposed to the horrorshow
last time I sent in a patch).
Once this is confirmed, I will make a tarball of files that can be
dropped into a 6.3.2 source tree as a few people have asked for
this in 6.3.2 as well.
David Gould
Attached patch will add a version() function to Postges, e.g.
template1=> select version();
version
------------------------------------------------------------
PostgreSQL 6.3.2 on i586-pc-linux-gnu, compiled by gcc 2.8.1
(1 row)
Ok, I have finally gotten all of the defines for Dec/Alpha and
Linux/Alpha sorted out as Marc asked. There is no longer any need for
'-Dalpha' or '-Dlinuxalpha' in either the Dec/Alpha or the Linux/Alpha
template files (./src/template/{alpha,linuxalpha}). I have replaced every
instance of 'alpha' or '__alpha__' with '__alpha', as that appears to be
the common symbol between C compilers on both operating systems (RH4.2 &
DecUnix 4.0b) for alpha.
The following patches will allow postgreSQL 6.3 to compile and run on a
UNIXWARE 2.1.2 system with the native C compiler with the following library
change:
The alloca function must be copied from the libucb.a archive and added
to the libgen.a archive.
Also, the GNU flex program is needed to successfully build postgreSQL.
Only occurrs in
src/include/storage/s_lock.h:#if defined(__AIX)
src/include/utils/dt.h:#if defined(__AIX)
src/include/utils/nabstime.h:#if defined(__AIX)
Simply delete one underscore, only occurs once per file, so no patch.
Apart from this Makefile hack, all I've done is to make dynamically
loaded code modules fail properly (as was already done for __mips__,
although I think this is too loose: I believe NetBSD for the pmax can
do dynamic linking), and to add test-and-set lock handling. As Bruce
suggested, this is done in a maximally efficient inlined way: I was
not aware that this code was so important, speed-wise.
The attached patches will allow postgreSQL to compile successfully on SCO
UNIXWARE 2.1.x. The patches fix the following problems:
1. Configure did not properly recognize the UNIXWARE system as needing the
univel port. It used the sys4 port.
2. Configure did not properly process the CC flag in the template file.
3. There was no working test and set locking implementation for the native
UNIXWARE compiler.
4. The test and set locking used for Intel X86 that was selected by defining
NEED_I386_TAS_ASM could fail in a multi-processor environment.
5. The makefiles for libpq and libpgtcl did not make a shared library for
the univel port.
==========================================
What follows is a set of diffs that cleans up the usage of BLCKSZ.
As a side effect, the person compiling the code can change the
value of BLCKSZ _at_their_own_risk_. By that, I mean that I've
tried it here at 4096 and 16384 with no ill-effects. A value
of 4096 _shouldn't_ affect much as far as the kernel/file system
goes, but making it bigger than 8192 can have severe consequences
if you don't know what you're doing. 16394 worked for me, _BUT_
when I went to 32768 and did an initdb, the SCSI driver broke and
the partition that I was running under went to hell in a hand
basket. Had to reboot and do a good bit of fsck'ing to fix things up.
The patch can be safely applied though. Just leave BLCKSZ = 8192
and everything is as before. It basically only cleans up all of the
references to BLCKSZ in the code.
If this patch is applied, a comment in the config.h file though above
the BLCKSZ define with warning about monkeying around with it would
be a good idea.
Darren darrenk@insightdist.com
(Also cleans up some of the #includes in files referencing BLCKSZ.)
==========================================
Reply-To: hackers@hub.org, Dan McGuirk <mcguirk@indirect.com>
To: hackers@hub.org
Subject: [HACKERS] tmin writeback optimization
I was doing some profiling of the backend, and noticed that during a certain
benchmark I was running somewhere between 30% and 75% of the backend's CPU
time was being spent in calls to TransactionIdDidCommit() from
HeapTupleSatisfiesNow() or HeapTupleSatisfiesItself() to determine that
changed rows' transactions had in fact been committed even though the rows'
tmin values had not yet been set.
When a query looks at a given row, it needs to figure out whether the
transaction that changed the row has been committed and hence it should pay
attention to the row, or whether on the other hand the transaction is still
in progress or has been aborted and hence the row should be ignored. If
a tmin value is set, it is known definitively that the row's transaction
has been committed. However, if tmin is not set, the transaction
referred to in xmin must be looked up in pg_log, and this is what the
backend was spending a lot of time doing during my benchmark.
So, implementing a method suggested by Vadim, I created the following
patch that, the first time a query finds a committed row whose tmin value
is not set, sets it, and marks the buffer where the row is stored as
dirty. (It works for tmax, too.) This doesn't result in the boost in
real time performance I was hoping for, however it does decrease backend
CPU usage by up to two-thirds in certain situations, so it could be
rather beneficial in high-concurrency settings.
Subject: [HACKERS] linux/alpha patches
These patches lay the groundwork for a Linux/Alpha port. The port doesn't
actually work unless you tweak the linker to put all the pointers in the
first 32 bits of the address space, but it's at least a start. It
implements the test-and-set instruction in Alpha assembly, and also fixes
a lot of pointer-to-integer conversions, which is probably good anyway.
The following patches add to the backend a new debugging flag -K which prints
a debug trace of all locking operations on user relations (those with oid
greater than 20000). The code is compiled only if LOCK_MGR_DEBUG is defined,
so the patch should be harmless if not explicitly enabled.
I'm using the code to trace deadlock conditions caused by application queries
using the command "$POSTMASTER -D $PGDATA -o '-d 1 -K 1'.
The patches are for version 6.0 dated 970126.