This to allow verifying the MSVC build file generation without having
to have Windows.
To do this, we avoid Windows-specific Perl modules and don't run the
"cl" compiler or "nmake". The resulting build files won't actually be
completely correct, but it's useful enough.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d73b2c7b-f081-8357-8422-7564d55f1aac%402ndquadrant.com
These compiler features are required by C99, so remove the configure
probes for them.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm; it's been required by POSIX since SUSv2. So remove the
configure probe and tests of HAVE_WCHAR_H.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
These are required by POSIX since SUSv2, and no live platforms fail
to provide them. On Windows, utime() exists and we bring our own
<utime.h>, so we're good there too. So remove the configure probes
and ad-hoc substitute code. We don't need to check for utimes()
anymore either, since that was only used as a substitute.
In passing, make the Windows build include <sys/utime.h> only where
we need it, not everywhere.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this since _MSC_VER >= 1200, and so do all other live
platforms according to the buildfarm, so remove the configure probe
and src/port/ substitution.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and c.h's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and float.c's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
This also lets us get rid of some configure probes that existed only
to support src/port/isinf.c. I kept the port.h hack to force using
__builtin_isinf() on clang, though.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
Keep the probe that detects whether _LARGEFILE_SOURCE has to be
defined to get that, though ... that seems to be still relevant in
some places.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
GCC reports various instances of
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
and MSVC equivalently
warning C4312: 'type cast': conversion from 'int' to 'void *' of greater size
warning C4311: 'type cast': pointer truncation from 'void *' to 'long'
in ECPG test files. This is because void* and long are cast back and
forth, but on 64-bit Windows, these have different sizes. Fix by
using intptr_t instead.
The code actually worked fine because the integer values in use are
all small. So this is just to get the test code to compile warning-free.
This change is simplified by having made stdint.h required (commit
957338418b). Before this it would have
been more complicated because the ecpg test source files don't use the
full pg_config.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/5d398bbb-262a-5fed-d839-d0e5cff3c0d7%402ndquadrant.com
Previously, partition_bounds_copy() checked whether the strategy for the
given partition bounds was hash or not, and then determined the number of
elements in the datums in the datums array for the partition bounds, on
each iteration of the loop for copying the datums array, but there is no
need to do that. Perform the checks only once before the loop iteration.
Author: Etsuro Fujita
Reported-by: Amit Langote and Julien Rouhaud
Discussion: https://postgr.es/m/CAPmGK14Rvxrm8DHWvCjdoks6nwZuHBPvMnWZ6rkEx2KhFeEoPQ@mail.gmail.com
stdint.h belongs to the compiler (as opposed to inttypes.h), so by
requiring a C99 compiler we can also require stdint.h
unconditionally. Remove configure checks and other workarounds for
it.
This also removes a few steps in the required portability adjustments
to the imported time zone code, which can be applied on the next
import.
When using GCC on a platform that is otherwise pre-C99, this will now
require at least GCC 4.5, which is the first release that supplied a
standard-conforming stdint.h if the native platform didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/5d398bbb-262a-5fed-d839-d0e5cff3c0d7%402ndquadrant.com
The documentation included some outdated instructions to change the
architecture, build type or target OS of a build done with MSVC. This
commit updates the documentation to include the modern options
available, down to Visual Studio 2013.
Reported-by: Kyotaro Horiguchi
Author: Juan José Santamaría Flecha
Discussion: https://postgr.es/m/CAC+AXB0J7tAqW_2F1fCE4Dh2=Ccz96TcLpsGXOCvka7VvWG9Qw@mail.gmail.com
Backpatch-through: 12
Avoid a join between relations having the FK to detect FK violation.
The planner might optimize this considering the PK must exist on the
referenced side at some point, effectively masking a bug this test
tries to detect.
Tom Lane and Jehan-Guillaume de Rorthais
Discussion: https://postgr.es/m/467.1581270529@sss.pgh.pa.us
e2e0219 has removed a code path for Windows 2000 that attempts to load
wship6.dll as fallback if ws2_32.dll is found but not getaddrinfo(),
leaving behind a dangling pointer as the library is freed. However,
there is no point in this check as ws2_32.dll exists since Windows XP,
so just remove the duplicated check.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/9781.1582146114@sss.pgh.pa.us
Creating a bunch of non-overlapping partial indexes is generally
a bad idea, so add an example saying not to do that.
Back-patch to v10. Before that, the alternative of using (real)
partitioning wasn't available, so that the tradeoff isn't quite
so clear cut.
Discussion: https://postgr.es/m/CAKVFrvFY-f7kgwMRMiPLbPYMmgjc8Y2jjUGK_Y0HVcYAmU6ymg@mail.gmail.com
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
The function hash table keys made by compute_function_hashkey() failed
to distinguish event-trigger call context from regular call context.
This meant that once we'd successfully made a hash entry for an event
trigger (either by validation, or by normal use as an event trigger),
an attempt to call the trigger function as a plain function would
find this hash entry and thereby bypass the you-can't-do-that check in
do_compile(). Thus we'd attempt to execute the function, leading to
strange errors or even crashes, depending on function contents and
server version.
To fix, add an isEventTrigger field to PLpgSQL_func_hashkey,
paralleling the longstanding infrastructure for regular triggers.
This fits into what had been pad space, so there's no risk of an ABI
break, even assuming that any third-party code is looking at these
hash keys. (I considered replacing isTrigger with a PLpgSQL_trigtype
enum field, but felt that that carried some API/ABI risk. Maybe we
should change it in HEAD though.)
Per bug #16266 from Alexander Lakhin. This has been broken since
event triggers were invented, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16266-fcd7f838e97ba5d4@postgresql.org
* Separate calculation of hash value from the lookup.
* Split build_hash_table() into two functions.
* Change lookup_hash_entry() to return AggStatePerGroup. That's all
the caller needed, anyway.
These changes are to support the upcoming Disk-based Hash Aggregation
work.
Discussion: https://postgr.es/m/31f5ab871a3ad5a1a91a7a797651f20e77ac7ce3.camel%40j-davis.com
Prior to this commit, the read buffer was allocated at the time the tape
was rewound; but as an optimization, would not be allocated at all if
the tape was empty.
That optimization meant that it was valid to have a rewound tape with
the buffer set to NULL, but only if a number of conditions were met
and only if the API was used properly. After 7fdd919a refactored the
code to support lazily-allocating the buffer, Coverity started
complaining.
The optimization for empty tapes doesn't seem important, so just
allocate the buffer whether the tape has any data or not.
Discussion: https://postgr.es/m/20351.1581868306%40sss.pgh.pa.us
VACUUM may truncate heap in several batches. The activity report
is logged for each batch, and contains the number of pages in the table
before and after the truncation, and also the elapsed time during
the truncation. Previously the elapsed time reported in each batch was
the total elapsed time since starting the truncation until finishing
each batch. For example, if the truncation was processed dividing into
three batches, the second batch reported the accumulated time elapsed
during both first and second batches. This is strange and confusing
because the number of pages in the table reported together is not
total. Instead, each batch should report the time elapsed during
only that batch.
The cause of this issue was that the resource usage snapshot was
initialized only at the beginning of the truncation and was never
reset later. This commit fixes the issue by changing VACUUM so that
the resource usage snapshot is reset at each batch.
Back-patch to all supported branches.
Reported-by: Tatsuhito Kasahara
Author: Tatsuhito Kasahara
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/CAP0=ZVJsf=NvQuy+QXQZ7B=ZVLoDV_JzsVC1FRsF1G18i3zMGg@mail.gmail.com
This fixes and updates a couple of comments related to outdated Windows
versions. Particularly, src/common/exec.c had a fallback implementation
to read a file's line from a pipe because stdin/stdout/stderr does not
exist in Windows 2000 that is removed to simplify src/common/ as there
are unlikely versions of Postgres running on such platforms.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Juan José Santamaría Flecha
Discussion: https://postgr.es/m/20191219021526.GC4202@paquier.xyz
Manifested as
ERROR: subtransaction logged without previous top-level txn record
this check forbids legit behaviours like
- First xl_xact_assignment record is beyond reading, i.e. earlier
restart_lsn.
- After restart_lsn there is some change of a subxact.
- After that, there is second xl_xact_assignment (for another subxact)
revealing the relationship between top and first subxact.
Such a transaction won't be streamed anyway because we hadn't seen it in
full. Saying for sure whether xact of some record encountered after
the snapshot was deserialized can be streamed or not requires to know
whether it wrote something before deserialization point --if yes, it
hasn't been seen in full and can't be decoded. Snapshot doesn't have such
info, so there is no easy way to relax the check.
Reported-by: Hsu, John
Diagnosed-by: Arseny Sher
Author: Arseny Sher, Amit Kapila
Reviewed-by: Amit Kapila, Dilip Kumar
Backpatch-through: 9.5
Discussion: https://postgr.es/m/AB5978B2-1772-4FEE-A245-74C91704ECB0@amazon.com
btbuild() has nothing to say about how NULL values compare in nbtree.
Besides, there are _bt_compare() header comments that describe how NULL
values are handled.
Previously, LOCK TABLE command through a parent table checked
the permissions on not only the parent table but also the children
tables inherited from it. This was a bug and inherited queries should
perform access permission checks on the parent table only. This
commit fixes LOCK TABLE so that it does not check the permission
on children tables.
This patch is applied only in the master branch. We decided not to
back-patch because it's not hard to imagine that there are some
applications expecting the old behavior and the change breaks their
security.
Author: Amit Langote
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwE+GauyG7POtRfRwwthAGwTjPQYdFHR97+LzA4RHGnJxA@mail.gmail.com
This was unaccountably omitted in the original RLS patch.
The SQL syntax is basically the same as for comments on triggers,
so crib code from dumpTrigger().
Per report from Marc Munro. Back-patch to all supported branches.
Discussion: https://postgr.es/m/1581889298.18009.15.camel@bloodnok.com
When updating a table row with generated columns, only recompute those
generated columns whose base columns have changed in this update and
keep the rest unchanged. This can result in a significant performance
benefit. The required information was already kept in
RangeTblEntry.extraUpdatedCols; we just have to make use of it.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b05e781a-fa16-6b52-6738-761181204567@2ndquadrant.com
The extraUpdatedCols field of the target RTE records which generated
columns are affected by an update. This is used in a variety of
places, including per-column triggers and foreign data wrappers. When
an update was initiated by a logical replication subscription, this
field was not filled in, so such an update would not affect generated
columns in a way that is consistent with normal updates. To fix,
factor out some code from analyze.c to fill in extraUpdatedCols in the
logical replication worker as well.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b05e781a-fa16-6b52-6738-761181204567@2ndquadrant.com
This commit also updates wait event enum into alphabetical order.
Previously the enum entry for GSSOpenServer was added out-of-order.
Back-patch to v12 where commit b0b39f72b9 introduced
GSSOpenServer wait event. In v12, the commit doesn't include
the update of wait event enum, not to break ABI.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/949931aa-4ed4-d867-a7b5-de9c02b2292b@oss.nttdata.com
Commit 0da33c762 introduced an unfortunate regression in pg_ctl on
Windows: if the log file specified with -l doesn't exist yet, and
pg_ctl is running with Administrator privileges, then the log file
might get created with permissions that prevent the postmaster from
writing on it. (It seems that whether this happens depends on whether
the log file is inside the user's home directory or not, and perhaps
on other phase-of-the-moon conditions, which may explain why we failed
to notice it sooner.)
To fix, just don't create the log file if it doesn't exist yet. The
case where we need to wait obviously only occurs with a pre-existing
log file.
In passing, switch from using fopen() to plain open(), saving a few
cycles.
Per bug #16259 from Jonathan Katz and Heath Lord. Back-patch to v12,
as the faulty commit was.
Alexander Lakhin
Discussion: https://postgr.es/m/16259-c5ebed32a262a8b1@postgresql.org
Practically everybody who's ever added a column to one of the bootstrap
catalogs has been burnt by the need to update the relnatts field in the
initial pg_class data to match. Now that we use Perl scripts to
generate postgres.bki, we can have the machines take care of that,
by filling the field during genbki.pl.
While at it, use the BKI_DEFAULTS mechanism to eliminate repetitive
specifications of other column values in pg_class.dat, too. They
weren't particularly a maintenance problem, but this way is prettier
(certainly the spotty previous usage of BKI_DEFAULTS wasn't pretty).
No catversion bump needed, since this doesn't actually change the
contents of postgres.bki.
Per gripe from Justin Pryzby, though this is quite different from
his originally proposed solution.
Amit Langote, John Naylor, Tom Lane
Discussion: https://postgr.es/m/20200212182337.GZ1412@telsasoft.com
The stylesheets used for the HTML documentation rendered on
postgresql.org have shifted, and no longer matched what was expected by
"make STYLE=website html" builds performed locally. Local doc builds
did not reflect other aspects of the website, including font and
margins.
This patch updates the references to use the current set of stylesheets
that are used by the documentation on postgresql.org. This also wraps
the documentation preview in a HTML container so it can keep the content
within similar margins to those found on the website.
The documentation on building the docs is updated to reflect this
change, and to let the documentation builder know that an external
network connection is required to properly preview documentation built
with "make STYLE=website html" (which was true prior to this patch too,
but not mentioned).
Author: Jonathan Katz
Reported-By: Tom Lane
Discussion: https://postgr.es/m/1375.1581446233@sss.pgh.pa.us
Since its introduction in fe59e56, the code in charge of validating and
converting a file path includes some extra handling for absolute paths
pointing to an external log_directory, but this has never been used.
Author: Antonin Houska
Reviewed-by: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/32663.1581592539@antos
This allows these modules to be installed into a database without
superuser privileges (assuming that the DBA or sysadmin has installed
the module's files in the expected place). You only need CREATE
privilege on the current database, which by default would be
available to the database owner.
The following modules are marked trusted:
btree_gin
btree_gist
citext
cube
dict_int
earthdistance
fuzzystrmatch
hstore
hstore_plperl
intarray
isn
jsonb_plperl
lo
ltree
pg_trgm
pgcrypto
seg
tablefunc
tcn
tsm_system_rows
tsm_system_time
unaccent
uuid-ossp
In the future we might mark some more modules trusted, but there
seems to be no debate about these, and on the whole it seems wise
to be conservative with use of this feature to start out with.
Discussion: https://postgr.es/m/32315.1580326876@sss.pgh.pa.us
Peter Eisentraut
Tom Lane
Jeff Davis
Etsuro Fujita
Michael Paquier
Alvaro Herrera
Fujii Masao
Amit Kapila
Peter Geoghegan